HP Photosmart C4100 All-in-One series

Basics Guide

2006 Hewlett-Packard Development Company, L.P.
Adobe and the Acrobat logo are trademarks of Adobe Systems Incorporated. Windows, Windows NT, Windows ME, Windows XP, and Windows 2000 are U.S. registered trademarks of Microsoft Corporation. Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Energy Star and Energy Star logo are US registered marks of the United States Environmental Protection Agency. Publication number: Q8100-90256
Hewlett-Packard Company notices
The information contained in this document is subject to change without notice. All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of HewlettPackard, except as allowed under copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Contents

HP All-in-One overview...2 The HP All-in-One at a glance...3 Control panel features....4 Use the HP Photosmart software...6 Find more information...6 Access the onscreen Help...6 Load originals and load paper...7 Avoid paper jams...10 Make a copy....10 Scan an image....10 Print 10 x 15 cm (4 x 6 inch) photos...11 Print from a software application...12 Replace the print cartridges....13 Clean the HP All-in-One....Troubleshooting and support...17 Uninstall and reinstall the software...17 Hardware setup troubleshooting...18 Clear paper jams...20 Print cartridge troubleshooting...22 Before you call HP customer support..Technical information...24 System requirements....24 Paper specifications...24 Print specifications...24 Copy specifications....25 Scan specifications....25 Physical specifications...25 Power specifications...25 Environmental specifications...25 Acoustic information...25 Environmental product stewardship program..25 Regulatory notices...25 Warranty....27 Index.....28 1

HP All-in-One overview

Use the HP All-in-One to quickly and easily accomplish tasks such as making a copy, scanning documents, or printing photos from a memory card. You can access many HP All-in-One functions directly from the control panel, without turning on your computer. Note This guide introduces basic operations and troubleshooting, as well as providing information for contacting HP support and ordering supplies. The onscreen Help details the full range of features and functions, including use of the HP Photosmart software that came with the HP All-in-One. For more information, see Access the onscreen Help on page 6. Copy The HP All-in-One enables you to produce high-quality color and black-and-white copies on a variety of paper types, including transparencies. You can enlarge or reduce the size of an original to fit a specific paper size, adjust the darkness of the copy, and use special features to make high-quality copies of photos, including borderless copies. Scan Scanning is the process of converting text and pictures into an electronic format for your computer. You can scan almost anything (photos, magazine articles and text documents) on the HP All-in-One. Print photots The HP All-in-One is equipped with memory card slots which enable you to insert a memory card and begin printing or editing photos without uploading your photos to a computer first. Additionally, if the HP All-in-One is connected to a computer with a USB cable, you can also transfer your photos to the computer to print, edit, or share. Warning Do not insert more than one memory card at a time. If more than one memory card is inserted, unrecoverable data loss might occur. Print from your computer The HP All-in-One can be used with any software application that allows printing. You can print a range of projects, such as borderless images, newsletters, greeting cards, iron-on transfers, and posters.

The HP All-in-One at a glance

Label 9 10

Description Color graphics display (also referred to as the display) Control panel Photo paper cassette Memory card slots Input tray Paper tray extender (also referred to as the tray extender) Paper-width guide Print cartridge door Glass Lid backing

Label 1

Description Rear door
Chapter 1 (continued) HP All-in-One overview

Label 2 3

Description Rear USB port Power connection*
Use only with the power adapter supplied by HP.

Control panel features

The following diagram and related table provide a quick reference to the HP All-inOne control panel features.
Name and Description Color graphics display (also referred to as the display): View menus, photos, and messages. The display can be pulled up and angled for better viewing.

(continued)

Name and Description Directional pad: Navigates through menu options. On button: Turns the HP All-in-One on or off. When the HP All-in-One is off, a minimal amount of power is still supplied to the device. To completely remove power, turn the HP All-in-One off, and then unplug the power cord. Attention light: Indicates a problem occurred. See the display for more information. Back button: Returns to previous screen. Setup: Accesses the menu system for reports and maintenance. Preview: Displays a preview of a scan, copy, or photo job. Photo Fix: Adjusts a photo for viewing or printing. Features include color effects, photo brightness, frames, and red-eye removal. Press this button to switch this feature on and off. Photo Fix is on by default. Photosmart Express: Launches the Photosmart Express menu for printing, editing, and sharing photos. Scan Menu: Opens the Scan Menu. Copy Menu: Selects copy options, such as number of copies, paper size, and paper type. Start Copy Black: Starts a black-and-white copy. Start Copy Color: Starts a color copy. Start Scan: Starts a scan job and sends it to the destination you selected using the Scan Menu button. Print Photos: Prints all selected images in color. Reprints: Scans the original on the glass and launches the Photosmart Express menu. Cancel: Stops the current operation, exits a menu, or exits settings. Help: Opens the Help menu on the display. Rotate: Rotates the currently displayed photo on the display 90 degrees. Subsequent presses continue to rotate the photo 90 degrees. Zoom Out: Zooms out to show more of a photo on the display. Zoom In: Zooms in to enlarge the image on the display. You can also use this button to adjust the crop box when printing. OK: Selects a menu, setting, or value displayed on the display.

Chapter 1 HP All-in-One overview
Use the HP Photosmart software
You can use the HP Photosmart software to access many features not available from the control panel. The HP Photosmart software provides a fast and easy way to make prints of your photos or to purchase prints online. It also provides access to other basic HP Photosmart software features, such as saving, viewing, and sharing your photos. For more information on using the HP Photosmart software, see the HP Photosmart Software Help.

Find more information

A variety of resources, both printed and onscreen, provide information about setting up and using the HP All-in-One. Setup Guide The Setup Guide provides instructions for setting up your HP All-in-One and installing software. Make sure you follow the steps in the Setup Guide in order. If you have problems during setup, see Troubleshooting in the last section of the Setup Guide, or see Troubleshooting and support on page 17 in this guide. HP Photosmart Software Tour (Windows) The HP Photosmart Software Tour is a fun, interactive way to get a brief overview of the software included with your HP All-in-One. You'll learn how the software you installed with your HP All-in-One can help you edit, organize, and print your photos. Onscreen Help The onscreen Help provides detailed instructions on features of your HP All-inOne that are not described in this User Guide, including features that are only available using the software you installed with your HP All-in-One. For more information, see Access the onscreen Help on page 6. Readme The Readme file contains the most recent information which might be not be found in other publications. Install the software to access the Readme file. www.hp.com/support If you have Internet access, you can get help and support from the HP website. This website offers technical support, drivers, supplies, and ordering information.

Access the onscreen Help

This guide describes a sampling of the features available, so you can get started using the HP All-in-One. Explore the onscreen Help that came with your device for information on all the features that the HP All-in-One supports. To access the HP Photosmart Software Help on a Windows computer 1. In the HP Solution Center, click the tab for the HP All-in-One. 2. In the Device Support area, click Onscreen Guide or Troubleshooting. If you click Onscreen Guide, a pop-up menu appears. You can choose to open the welcome page for the entire Help system or to go specifically to the Help for the HP All-in-One. If you click Troubleshooting, the Troubleshooting and support page opens.

To access the HP Photosmart Mac Help On the Help menu in the HP Photosmart Studio, choose HP Photosmart Mac Help. The HP Photosmart Mac Help appears.
Load originals and load paper
You can copy or scan up to letter- or A4-size originals by loading them on the glass. To load an original on the glass 1. Lift the lid on the HP All-in-One. 2. Load your original print side down in the right front corner of the glass. Tip For more help on loading an original, refer to the engraved guides along the edge of the glass.

Close the lid.

To load full-size paper 1. Slide the paper-width guide to its outermost position.
Note If you are using letter or A4 paper or smaller, make sure the tray extender is open all the way. 2. Tap a stack of paper on a flat surface to align the edges, and then check the paper for the following: Make sure it is free of rips, dust, wrinkles, and curled or bent edges. Make sure all the paper in the stack is the same size and type. Insert the stack of paper into the input tray with the short edge forward and the print side down. Slide the stack of paper forward until it stops.
Caution Make sure that the HP All-in-One is idle and silent when you load paper into the input tray. If the HP All-in-One is servicing the print cartridges or otherwise engaged in a task, the paper stop inside the device might not be in place. You could push the paper too far forward, causing the HP All-in-One to eject blank pages. Tip If you are using letterhead, insert the top of the page first with the print side down. 4. Slide the paper-width guide inward until it stops at the edge of the paper. Do not overload the input tray; make sure the stack of paper fits within the input tray and is no higher than the top of the paper-width guide. Note When you use legal-size paper, leave the tray extender closed.
To load 10 x 15 cm ( 4 x 6 inch) photo paper using the photo paper cassette 1. Remove all paper from the input tray. 2. Pop out the photo paper cassette using the grooves.
Pull the photo paper cassette towards you.
Load up to 20 sheets of paper print side down in the photo paper cassette.
Adjust the paper-length and paper-width guides to fit the loaded paper.
Line up the photo paper cassette with the right side of the input tray, and then slide it into the printer until it stops.

Pull the tray extender out to hold your printed photos. When you finish printing, remove the photo paper cassette and store it in the cassette storage area on the left side of the HP All-in-One. Tip You can store your photo paper in the stowed photo paper cassette when not printing. This protects the photo paper from rips, wrinkles, and curled or bent edges.

Avoid paper jams

To help avoid paper jams, follow these guidelines. Remove printed papers from the output tray frequently. Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag. Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn. Do not combine different paper types and paper sizes in the input tray; the entire stack of paper in the input tray must be the same size and type. Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure the paper-width guide does not bend the paper in the input tray. Do not force paper too far forward in the input tray. Use paper types that are recommended for the HP All-in-One.

Make a copy

You can make quality copies from the control panel. To make a copy from the control panel 1. Make sure you have paper loaded in the input tray. 2. Load your original print side down in the right front corner of the glass. 3. Press Start Copy Black or Start Copy Color to begin copying.

Scan an image

You can start a scan from your computer or from the HP All-in-One. This section explains how to scan from the control panel of the HP All-in-One only. To use the scan features, the HP All-in-One and computer must be connected and turned on. The HP Photosmart Software (Windows) or HP Photosmart Mac Software (Mac) must also be installed and running on your computer prior to scanning. On a Windows computer, look for the HP Digital Imaging Monitor icon in the Windows system tray (at the lower right side of the screen, near the time) to verify the software is running. Note Closing the HP Digital Imaging Monitor icon in the Windows system tray can cause the HP All-in-One to lose some of its scan functionality. If this happens, you can restore full functionality by restarting your computer or by starting the HP Photosmart Software. On a Mac, the software is always running. Tip You can use the HP Photosmart Software (Windows) or HP Photosmart Mac Software (Mac) to scan images, including panorama images. Using this software, you can also edit, print, and even share your scanned images. For more information, see the onscreen Help that came with the HP All-in-One. To scan to a computer 1. Load your original print side down in the right front corner of the glass. 2. Press Start Scan.

Press OK to select the default application to receive the scan, or press to select a different application, and then press OK. A preview image of the scan appears on your computer, where you can edit it. Make any edits to the preview image, and then click Accept when you are finished.
Print 10 x 15 cm (4 x 6 inch) photos
You can select specific photos on your memory card to print as 10 x 15 cm (4 x 6 inch) photos. To print one or more 10 x 15 cm (4 x 6 inch) photos 1. Insert your memory card into the appropriate slot on the HP All-in-One. The HP All-in-One supports the memory cards described below. Each type of memory card can only be inserted in the appropriate slot for that card.

3. 4. 5. 6.

Top slot: xD-Picture Card Second slot from top: Memory Stick, Magic Gate Memory Stick, Memory Stick Duo (with user-supplied adapter), Memory Stick Pro Third slot from top: CompactFlash (I, II) Bottom slot: Secure Digital, MultiMediaCard (MMC), Secure MultiMedia Card Press OK to select Print. When you press OK, the most recent photo on your memory card appears on the display. Press or to scroll through the photos on your memory card. When the photo you want to print appears, press OK. Press OK to select 4 x 6. Press or to highlight a paper size, and then press OK. The following options are available: Print one 10 x 15 cm (4 x 6 inch) borderless photo on each sheet of 10 x 15 cm (4 x 6 inch) photo paper Print up to three 10 x 15 cm (4 x 6 inch) photos with borders on a full-size sheet of paper When you press OK, the selected photo reappears. (Optional) Change print settings or select additional photos to print. For information on these options, see the onscreen Help that came with your HP Allin-One.

Chapter 1

When you are done changing print settings and selecting photos, press OK to display the selection menu. 9. Press to highlight Done Selecting, and then press OK. The Print Summary screen appears. 10. Press or to highlight one of the following options, and then press OK.
Print Options Enables you to manually specify the type of paper on which you are printing and whether you want to print a date and time stamp on your photo. By default, the Paper Type is set to Automatic and the Date Stamp setting is set to Off. If you want, you can change the defaults of these settings with the Set New Defaults option. Print Preview Displays a preview of what your printed page will look like. This enables you to verify your settings before printing and wasting paper and ink on potential mistakes. Prints your photos with the size and layout you selected.

Clean the lid backing

Minor debris can accumulate on the white document backing located underneath the lid of the HP All-in-One. To clean the lid backing 1. Turn off the HP All-in-One, unplug the power cord, and raise the lid. 2. Clean the white document backing with a soft cloth or sponge slightly moistened with a mild soap and warm water. Wash the backing gently to loosen debris. Do not scrub the backing. 3. Dry the backing with a dry, soft, lint-free cloth. Caution Do not use paper-based wipes, as these might scratch the backing. 4. If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the backing thoroughly with a damp cloth to remove any residual alcohol. Caution Be careful not to spill alcohol on the glass or exterior of the HP All-in-One, as this might damage the device. 5. Plug in the power cord, and then turn on the HP All-in-One.
Troubleshooting and support
This chapter contains troubleshooting information for the HP All-in-One. Specific information is provided for installation and configuration issues, and some operational topics. For more troubleshooting information, see the onscreen Help that came with your software. Many issues are caused when the HP All-in-One is connected to the computer using a USB cable before the HP All-in-One software is installed on the computer. If you connected the HP Allin-One to your computer before the software installation screen prompts you to do so, you must follow these steps: Troubleshooting common setup issues 1. 2. 3. 4. 5. Disconnect the USB cable from the computer. Uninstall the software (if you have already installed it). Restart your computer. Turn off the HP All-in-One, wait one minute, then restart it. Reinstall the HP All-in-One software. Caution Do not connect the USB cable to the computer until prompted by the software installation screen. For support contact information, see the inside back cover of this guide. Troubleshooting and support
Uninstall and reinstall the software
If your installation is incomplete, or if you connected the USB cable to the computer before prompted by the software installation screen, you might need to uninstall and then reinstall the software. Do not simply delete the HP All-in-One application files from your computer. Make sure to remove them properly using the uninstall utility provided when you installed the software that came with the HP All-in-One. To uninstall from a Windows computer and then reinstall 1. 2. 3. 4. 5. On the Windows taskbar, click Start, Settings, Control Panel. Double-click Add/Remove Programs. Select the HP All-in-One, and then click Change/Remove. Follow the onscreen instructions. Disconnect the HP All-in-One from your computer. Restart your computer. Note It is important that you disconnect the HP All-in-One before restarting your computer. Do not connect the HP All-in-One to your computer until after you have reinstalled the software. 6. 7. Insert the HP All-in-One CD-ROM into your computers CD-ROM drive and then start the Setup program. Follow the onscreen instructions and the instructions provided in the Setup Guide that came with the HP All-in-One.

Troubleshooting and support
If you are connecting the HP All-in-One through a USB hub, make sure the hub is turned on. If the hub is on, try connecting directly to your computer. Check other printers or scanners. You might need to disconnect older products from your computer. Try connecting the USB cable to another USB port on your computer. After you check the connections, try restarting your computer. Turn the HP All-in-One off and then on again. After you check the connections, try restarting your computer. Turn the HP All-in-One off and then on again. If necessary, remove and then install the software you installed with the HP All-in-One again. For more information, see Uninstall and reinstall the software on page 17.
For more information on setting up the HP All-in-One and connecting it to your computer, see the Setup Guide that came with the HP All-in-One.

Clear paper jams

If the HP All-in-One has a paper jam, first check the rear door. If the jammed paper is not in the rear rollers, check the front door.
To clear a paper jam from the rear door 1. Press in the tab on the left side of the rear door to release the door. Remove the door by pulling it away from the HP All-in-One. Caution Trying to clear a paper jam from the front of the HP All-in-One can damage the print mechanism. Always access and clear paper jams through the rear door.
Gently pull the paper out of the rollers. Caution If the paper tears when you are removing it from the rollers, check the rollers and wheels for torn pieces of paper that might be remaining inside the device. If you do not remove all the pieces of paper from the HP All-in-One, more paper jams are likely to occur.
Replace the rear door. Gently push the door forward until it snaps into place. Press OK to continue the current job.
To clear a paper jam from the front door 1. If necessary, pull the input tray down to open it. Then, lower the print cartridge door.
Press Start Copy Black to continue the current job.

Chapter 2

Print cartridge troubleshooting
If you are experiencing problems with printing, you might have a problem with one of the print cartridges. To troubleshoot print cartridges 1. Remove the black print cartridge from the slot on the right. Do not touch the ink nozzles or the copper-colored contacts. Check for possible damage to the copper-colored contacts or ink nozzles. Make sure the plastic tape has been removed. If it is still covering the ink nozzles, gently remove the plastic tape by using the pink pull tab. Reinsert the print cartridge by sliding it forward into the slot. Then push the print cartridge forward until it clicks into the socket.

5. 6. 7.

Repeat steps 1 and 2 for the tri-color print cartridge on the left side. If the problem persists, print a self-test report to determine if there is a problem with the print cartridges. This report provides useful information about your print cartridges, including status information. If the self-test report shows a problem, clean the print cartridges. If the problem persists, clean the copper-colored contacts of the print cartridges. If you are still experiencing problems with printing, determine which print cartridge is experiencing the problem and replace it.
For more information, see the onscreen Help.
Before you call HP customer support
Software programs from other companies might be included with the HP All-in-One. If you experience problems with any of those programs, you will receive the best technical assistance by calling the experts at that company. If you need to contact HP Customer Support, do the following before you call: 1. Make sure that: a. The HP All-in-One is plugged in and turned on. b. The specified print cartridges are installed correctly. c. The recommended paper is properly loaded in the input tray. Reset the HP All-in-One: a. Turn off the HP All-in-One by pressing the On button. b. Unplug the power cord from the back of the HP All-in-One. c. Plug the power cord back into the HP All-in-One. d. Turn on the HP All-in-One by pressing the On button. To find support and warranty information, go to the HP website at www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Check the HP website for updated information or troubleshooting tips for the HP All-in-One. If you are still experiencing problems and need to speak with an HP Customer Support Representative, do the following: a. Have the specific name of the HP All-in-One, as it appears on the control panel, available. b. Print a self-test report. (See below.) c. Make a color copy to have available as a sample printout. d. Be prepared to describe your problem in detail. e. Have your serial number and service ID ready, found on the self-test report. Call HP Customer Support. Be near the HP All-in-One when you call.

To print a self-test report 1. 2. 3. 4. 5.
Load letter, A4, or legal unused plain white paper into the input tray. Press Setup. The Setup menu appears. Press the or the to highlight Print Report, and press OK. The Print Report menu appears. Press OK to print a self-test report, which might indicate the source of the printing problem. A sample of the ink test area of the report is shown below. Make sure the lines of color extend across the page.
If the black line is missing, faded, streaked, or shows lines, this might indicate a problem with the black print cartridge in the right slot. If any of the remaining three lines are missing, faded, streaked, or show lines, this might indicate a problem with the tri-color print cartridge in the left slot.
If the color bars do not appear as black, cyan, magenta and yellow, you might need to clean the print cartridges. If the problem is not resolved by cleaning the print cartridges, you might need to replace the print cartridges.

Technical information

The technical specifications and international regulatory information for the HP All-in-One are provided in this section.

System requirements

Software system requirements are located in the Readme file.

Paper specifications

This section contains information about paper tray capacities and paper sizes.

Paper tray capacities

Type Plain paper Legal paper Cards Envelopes Technical information Transparency film Labels 4 x 6 inch (10 x 15 cm) Photo paper 8.5 x 11 inch (216 x 279 mm) Photo paper * Paper weight 20 to 24 lb. (75 to 90 gsm) 20 to 24 lb. (75 to 90 gsm) 110 lb. index max (200 gsm) 20 to 24 lb. (75 to 90 gsm) N/A N/A 145 lb. (236 gsm) N/A Paper tray* 100 (20 lb. paper) 100 (20 lb. paper 20 Output tray 50 (20 lb. paper) 50 (20 lb. paper) 15 or fewer 10 15
Maximum capacity. Output tray capacity is affected by the type of paper and the amount of ink you are using. HP recommends emptying the output tray frequently.

Paper sizes

For a complete list of supported media sizes, see the printer software.

Print specifications

Up to 1200 x 1200 rendered dpi black when printing from a computer Up to 4800 x 1200 optimized dpi color when printing from a computer and 1200-input dpi Print speeds vary according to the complexity of the document Panorama-size printing Method: drop-on-demand thermal inkjet Language: PCL3 GUI Duty cycle: Up to 3000 printed pages per month

Copy specifications

Copy resolution up to 4800x1200 optimized dpi output using a scan resolution of 1200x1200ppi Digital image processing Up to 50 copies from original (varies by model) Zoom to 400%, fit to page Copy speeds vary according to the complexity of the document

Scan specifications

Image editor included Integrated OCR software automatically converts scanned text to editable text (if installed) Twain-compliant interface Resolution: up to 1200 x 2400 dpi optical (varies by model); 19200 dpi enhanced (software) Color: 48-bit color, 8-bit grayscale (256 levels of gray) Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.7 inches)

Physical specifications

Height: 40.2 cm (15.8 inches) Width: 46.5 cm (18.3 inches) Depth: 56.7 cm (22.3 inches) Weight: 4.5 kg (10 pounds)

Power specifications

Power consumption: 40 watts maximum (average printing) Input voltage: AC 100 to 240 V ~ 1 A 5060 Hz, grounded Output voltage: DC 32 V===940 mA, 16 V===625mA Technical information
Environmental specifications
Recommended operating temperature range: 15 to 32 C (59 to 90 F) Allowable operating temperature range: 5 to 35 C (41 to 95 F) Humidity: 15% to 80% RH non-condensing Non-operating (Storage) temperature range: 20 to 50 C (4 to 122 F) In the presence of high electromagnetic fields, it is possible the output from the HP All-inOne may be slightly distorted HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected noise due to potential high electromagnetic fields

Acoustic information

If you have Internet access, you can get acoustic information from the HP website. Go to: www.hp.com/support.
Environmental product stewardship program
Hewlett-Packard is committed to providing quality products in a environmentally sound manner. For information on HP's Environmental product stewardship program, see the onscreen Help.

Regulatory notices

The HP All-in-One meets product requirements from regulatory agencies in your country/region. For a complete listing of regulatory notices, see the onscreen Help.

Chapter 3

Regulatory model identification number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is SDGOB-0602. This regulatory number should not be confused with the marketing name (HP Photosmart C4100 All-in-One series, etc.) or product numbers (Q8100A, etc.).

Symbols/Numerics 10 x 15 cm photo paper specifications 24 B buttons, control panel 4 C cancel button 5 clean glass 15 lid backing 16 color graphics display 4 connection problems HP All-in-One does not turn on 18 control panel buttons 4 features 4 copy make a copy 10 specifications 25 customer support contact 22 D directional pad 5 E envelopes specifications 24 environment Environmental product stewardship program environmental specifications 25 G glass clean Hewlett-Packard Company notices 2 J jams, paper 10 L labels specifications left arrow 5 legal paper specifications letter paper specifications lid backing, clean print cartridges replace 13 troubleshoot 22 proof sheet 5 R regulatory notices regulatory model identification number 26 reinstall software 17 replace print cartridges 13 right arrow 5 rotate button 5 S scan button 5 documents 10 photos 10 scan specifications 25 scan glass clean 15 setup button 5 software application, print from 12 software installation reinstall 17 uninstall 17 specifications. See technical information start copy black 5 start copy color 5 system requirements 24 T technical information copy specifications 25 environmental specifications 25 paper sizes 24 paper specifications 24 paper tray capacities 24 physical specifications 25 power specifications 25 print specifications 24 scan specifications 25
M maintenance clean glass 15 clean lid backing 16 replace print cartridges 13 make a copy 10 memory cards slots 2 O OK button 5 on button 5 P paper jams 10, 20 paper sizes 24 specifications 24 paper tray capacities 24 phone numbers, customer support 22 photo paper specifications 24 Photosmart Express 5 physical specifications 25 power specifications 25 print from software application 12 specifications 24
H help use onscreen Help 6
Index system requirements 24 weight 25 telephone numbers, customer support 22 transparencies specifications 24 troubleshoot hardware installation 18 jams, paper 10 print cartridges 22 USB cable 18 U uninstall software 17 USB cable installation 18 Z zoom button

www.hp.com/support

Argentina (Buenos Aires) Argentina Australia Australia (out-of-warranty) sterreich 03-3335-9800 1588-007 (0,16 / min) 8588 55-5258-9922 01-800-472-(0,20 / min) +46 (0) 4765 1-800-711-0-800-10111 (63) 492 1-877-232-0589 1-800-711-332 4240
54-11-4708-1600 0-800-555-910 + 0810-0010000 (Inland) 55-11-4004-7751 0-800-709-7751 (905) 206-4663 1-800-474-6836 www.hp.com/support 800-360-999 86-10-68687980 800-810-3888 571-606-9191 01-8000-51-47468368 0-800-011-+ 1-999-119 800-711-2884 1-800-225-528 800-711-2884 800-+33 (0) (0,34 / min) +49 (0) 180 + 2654 1-800-711-+62 (21) 871 1-800-711-2884 0570-000511
Luxembourg Luxemburg Malaysia Mexico (Mexico City) Mexico Nederland New Zealand Nigeria Norge Panama Paraguay Per Philippines Polska Portugal Puerto Rico Repblica Dominicana Romnia () () 1415 Singapore Slovensko South Africa (international) South Africa (RSA) Rest of West Africa Suomi Sverige Switzerland