Lexmark Interact S600 Series Quick Reference Guide

May 2009

www.lexmark.com
Important Message About Cartridge Recycling! Please Read Before Opening Your Inkjet Cartridge Box At Lexmark, we take our commitment to the environment seriously, and we encourage our customers to participate in our easy, no-cost method for returning empty Lexmark cartridges to Lexmark for proper recycling. We will insure that cartridges are properly handled with zero waste to landfills.
Go to www.lexmark.com/recycle. Follow instructions to request postage-paid bags. Bags usually arrive within 710 days.
printer except as otherwise provided below, and (2) pass this license/agreement to any subsequent user of this printer. The patented Lexmark inkjet cartridges and their contents are licensed subject to a restriction that they may be used only once. After this single use, the license to use the print cartridges and their contents terminates, and you agree to return them only to Lexmark for recycling. Replacement inkjet cartridge(s) sold without these terms are available through www.lexmark.com and may be refilled by you, or a third party, as the only cartridge alternative to be used with the licensed printer.
Important safety information
Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. Do not place or use this product near water or wet locations. Use only the power supply and power cord provided with this product or the manufacturer's authorized replacements. CAUTIONPOTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it. CAUTIONSHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning storm.
Place the empty Lexmark-branded inkjet cartridge(s) in the postage-paid return bag, and then seal the bag. If youre sending single-color tanks, we recommend that you send at least two at a time to maximize the environmental benefits.
Mail the bag to Lexmarks recycling partner. The bag is preaddressed.
Visit www.lexmark.com/recycle to learn more about recycling. Lexmark-branded cartridges are always made with all new parts, though components may contain recycled material. For warranty returns, call 1-800-332-4120. This patented printer is licensed for, and designed to work with, only genuine Lexmark inkjet cartridges for the life of the patented printer. You agree to: (1) use only genuine Lexmark inkjet cartridges with this

Contents

Important safety information..2 About your printer...4
Finding information about the printer...4 Minimizing your printer's environmental impact...4 Printer models.....5 Printer features....5 Understanding the parts of the printer...5 Using the printer control panel....6 Understanding the home screen...7 Navigating menus using the touch screen...8 Using memory cards and flash drives...9

Making copies....16 Copying photos....17 Making a duplex copy automatically....17 Canceling copy jobs...17

Scanning....17

Tips for scanning.....17 Scanning to a local or network computer...17 Scanning to a flash drive or memory card...18 Scanning directly to e-mail using the printer software..18 Scanning to a PDF....18 Canceling scan jobs....19

E-mailing....19

Sending e-mail....19 Canceling an e-mail...20
Ordering and replacing supplies..10
Ordering ink cartridges...10 Replacing ink cartridges....10 Maintaining ink cartridges...11
Using SmartSolutions...20
What is SmartSolutions?....20
Using the printer software..12
Minimum system requirements....12 Installing the printer software....12 Using the Windows printer software...12 Using the Macintosh printer software...13
Troubleshooting...20 Notices....24

Printing....14

Printing a document....14 Printing on both sides of the paper (duplexing) automatically..15 Printing photos using the printer control panel...15 Canceling print jobs...16

Copying....16

Tips for copying....16

About your printer

Finding information about the printer
The Quick Reference Guide contains basic instructions on how to accomplish common printer tasks like printing, copying, and scanning. It also includes information on troubleshooting common printer setup problems. For additional information about the printer, see the following:
What are you looking for? Initial setup instructions Find it here
Minimizing your printer's environmental impact
We are committed to protecting the environment and are continually improving our printers to reduce their environmental impact. By selecting certain printer settings or tasks, you may be able to reduce your printer's environmental impact even further.

Conserving energy

Activate Eco-Mode. This feature sets the screen brightness to low and sets the printer to change to
Power Saver mode after the printer is left idle for 10 minutes.
Select the lowest Power Saver timeout. The Power Saver feature puts the printer in a minimum-power
standby mode after the printer has been idle for a set amount of time (the Power Saver timeout).
Share your printer. Wireless/network printers allow you to share a single printer among multiple
computers, thus conserving energy and other resources.
Quick Setup sheet Hardware Setup Wizard*
Additional setup and instructions for using the Comprehensive User's Guide installed automatically with printer the printer software.* After installing your printer, you can access the User's Guide from the printer program folder: For Windows users

Conserving paper

Activate Eco-Mode. On selected printer models, this feature sets the printer to automatically print on
both sides of the paper (duplex) for copy and fax jobs, and for printing in Windows and Mac OS X 10.6 or later.

Print more than one page image on one side of the paper. The Pages per sheet feature allows you
to print multiple pages on one sheet. You can print up to 8 page images on one side of a sheet of paper.
1 Click or Start. 2 Click All Programs or Programs, and then select the
printer program folder from the list.
Print on both sides of the paper. Duplexing lets you print on both sides of the paper manually or
automatically (depending on your printer model).
Preview print jobs before printing. Use the preview features found in Toolbars, the Print or Print
Preview dialog, or the printer display (depending on your printer model).
3 Select View User's Guide.
For Macintosh users In Mac OS X version 10.From the Applications folder in the Finder, double-click the printer folder. 2 Double-click User's Guide. In Mac OS X version 10.5 or earlier 1 From the Finder desktop, double-click the printer folder.
Scan and save. To avoid printing multiple copies, you can scan documents or photographs and save
them to a computer program, application, or flash drive for presentation.

Use recycled paper.

Conserving ink
Use Quick Print or Draft Mode. These modes can be used to print documents using less ink than
normal and are ideal for printing documents that are mostly text.
2 Double-click User's Guide.
Help using the printer software Software HelpHelp installed automatically with the printer software.* Click Help from any printer software program or application.
Use High Yield cartridges. Inks in High-Yield cartridges allow you to print more pages with fewer

cartridges.

Clean the printhead. Before replacing and recycling your ink cartridges, try using the Clean Printhead
and Deep Clean Printhead features. These features clean the printhead nozzles to improve the quality of your prints.
The latest supplemental information, updates, Support Web sitehttp://support.lexmark.com online technical support, and telephone support * Available on the installation software CD and on the Lexmark Web site at http://support.lexmark.com.

Recycling

Return ink cartridges for reuse or recycling through the Lexmark Cartridge Collection Program. To
return an ink cartridge, go to www.lexmark.com/recycle. Follow the instructions to request a postage-paid bag.

Recycle the product packaging. Recycle your old printer instead of throwing it away.
Recycle paper from discarded print jobs. Use recycled paper.
To read the Lexmark Environmental Sustainability Report, see www.lexmark.com/environment.
Understanding the parts of the printer

Printer models

The installation software CD that came with your printer works for this printer model:

Lexmark S605

Printer features
Your printer comes with full features that will help you manage and accomplish printing and imaging tasks:
Wireless or Ethernet networking. Print and scan from virtually anywhere in your home or office over
a secure wireless or Ethernet network, as well as share the printer among multiple computers.
Intuitive touch screen. Use the full-featured color touch screen for fast, easy access to all the printer
menus. The large screen also allows you to view, edit, and print photos directly from your digital camera or memory device without using a computer.
Print. Print documents and PDFs faster from a computer, from a USB flash drive, or from a Bluetooth
device. Built-in two-sided printing lets you save money and the environment.
Copy. Copy documents and photos with one-touch, computer-free black or color copying. Enjoy 25%
to 400% reduction and enlargement capacity.
Scan. Scan thick books, reports, and other multiple-page documents easily with the high resolution
scanner. Easily scan to a memory device or to multiple laptops or PCs over a secure wireless network with up to 1200 x 4800 optical resolution.
Photo printing. Print high quality, long-lasting photos directly from digital memory cards,
PictBridge-enabled digital cameras, and USB flash drives. Select photos to print using the proof sheet for computer-free printing.

Use the

Paper guide adjustment lever Adjust the paper guides. Paper support Paper guides Memory card slot PictBridge and USB port Card reader light Wi-Fi indicator Paper exit tray Printer control panel Scanner lid Load paper. Keep paper straight when feeding. Insert a memory card. Connect a PictBridge-enabled digital camera, a USB Bluetooth adapter, or a flash drive to the printer. Check card reader status. The light blinks to indicate that a memory card is being accessed. Check wireless status. Hold paper as it exits. Operate the printer. Access the scanner glass.

Return to the home screen. or PictBridge
Understanding the home screen
After the printer is turned on and a short warm-up period occurs, the display shows the following basic screen which is referred to as the home screen. Use the home screen selections to initiate an action, such as copying or scanning, or to change printer settings.

4 SmartSolutions

Open the SmartSolutions menu.

5 Ink levels

Display the current ink levels of the installed tanks. Access cartridge maintenance and information functions.
Access the setup menu and change printer settings.

7 2-Sided

Print on both sides of a sheet of paper.

Memory Device

Smart Solutions

Eco-Mode

Activate Eco-Mode to select the following options:
Print on both sides of the paper (duplex). Change to Power Saver mode after the printer is left idle for 10 minutes. Set screen brightness to low.
Navigating menus using the touch screen

PREVIEWING PHOTOS

To Scroll up.

Accept

PAPER TYPE

Up arrow

Auto Detect Plain Matte Photo
To navigate using the touch screen:
Drag the scrollbar or touch the arrows until the menu or setting that you want appears on the display. To confirm a setting or select a menu or item, touch it. If necessary, touch Accept, OK, or
after making a selection or changing a setting. This saves the setting. For example, to navigate to Paper Type and change the paper type setting:

Transparency

Use 1 Left arrow To Scroll left.

1 Touch

Note: All the instructions in this guide start from the home screen.
2 Touch Copy. 3 Touch More Options. 4 Scroll down (using the scrollbar or arrows) until Paper Type appears on the list. 5 Touch Paper Type.

Right arrow

Scroll right.
6 Scroll up or down (using the scrollbar or arrows) to view the list of paper types. 7 Select a paper type setting by touching it, and then touch Accept to save the setting.

Save your setting.

Down arrow Scroll down.

Scrollbar

Scroll up and down the menu list.
Using memory cards and flash drives
Using a memory card or flash drive with the printer
Memory cards and flash drives are storage devices frequently used with cameras and computers. You can remove the memory card from the camera or the flash drive from the computer and insert it directly into the printer.
1 Insert a memory card into the card slot or a flash drive into the USB port.
Inserting a memory card Inserting a flash drive WarningPotential Damage: Do not touch any cables, any network adapter, any connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory device. A loss of data can occur.

2 The Memory Device screen appears on the display.

Notes:

If the printer does not recognize the memory device, then remove and reinsert it. If a flash drive or a digital camera set to mass storage mode is inserted into the USB port while a

H AS FL E IV DR

MEMORY STICK
memory card is in the card slot, then a message appears on the display prompting you to choose which memory device to use.
Insert the card with the brand name label facing

right.

The flash drive uses the same port that is used
for a PictBridge camera cable.
Supported memory cards and file types
Memory Card File Type Documents:
Make sure any arrows on the card point toward

the printer.

An adapter may be necessary if your flash drive
does not fit directly into the port.
If necessary, connect the memory card to the
adapter that came with it.
Make sure that the memory card inserted is
supported by the printer. For more information, see Supported memory cards and file types on page 9.
Secure Digital (SD) Secure Digital High Capacity (SDHC) Micro Secure Digital (with adapter) (Micro SD) Mini Secure Digital (with adapter) (Mini SD) MultiMedia Card (MMC) Reduced Size MultiMedia Card (with adapter) (RS-MMC) (MMCmobile)
MultiMedia Card mobile (with adapter)
Memory Stick Memory Stick PRO Memory Stick Duo (with adapter) Memory Stick PRO Duo (with adapter) xD-Picture Card xD-Picture Card (Type H) xD-Picture Card (Type M)
.doc (Microsoft Word).xls (Microsoft Excel).ppt (Microsoft PowerPoint).pdf (Adobe Portable Document Format).rtf (Rich Text Format).docx (Microsoft Word Open Document Format).xlsx (Microsoft Excel Open Document Format).pptx (Microsoft PowerPoint Open Document Format)
.wpd (WordPerfect) Images: JPEG TIFF
Ordering and replacing supplies

Ordering ink cartridges

Page yields available at www.lexmark.com/pageyields. For best results, use only Lexmark ink cartridges. Lexmark S600 Series models
Item Black cartridge High yield black cartridge Yellow color cartridge High yield yellow color cartridge Cyan color cartridge High yield cyan color cartridge Magenta color cartridge High yield magenta color cartridge

2 Open the printer.

Return Program Cartridge100XL 100 100XL 100 100XL 100 100XL
Regular cartridge2 100A 100XLA 100A 100XLA 100A 100XLA 100A 100XLA
Note: The printhead moves to the cartridge installation position.
3 Press the release tab, and then remove the used ink cartridge or cartridges.
Licensed for a single use only. After use, return this cartridge to Lexmark for remanufacturing, refilling, or recycling. Available only on the Lexmark Web site at www.lexmark.com.

4 Install each ink cartridge. Use two hands to install the black cartridge.

Replacing ink cartridges

Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges immediately after removing the old ones or the ink remaining in the printhead nozzles may dry out.

1 Turn on your printer.

Note: Install the new ink cartridges immediately after removing the protective cap to avoid exposing the ink to air.

5 Close the printer.

If you aligned the cartridges to improve print quality, then print your document again. If print quality has not improved, then clean the printhead nozzles.
Maintaining ink cartridges
In addition to the following tasks that you can perform, your printer performs an automatic maintenance cycle every week if it is plugged into an electrical outlet. It will briefly come out of Power Saver mode or will temporarily power on if it is turned off.
Cleaning the printhead nozzles
Poor print quality is sometimes due to clogged printhead nozzles. Clean the printhead nozzles to improve the quality of your prints. Notes:

Aligning the printhead

If the characters or lines on your printed image appear jagged or wavy, then you may need to align the printhead.
Cleaning the printhead nozzles uses ink, so clean them only when necessary. Deep cleaning uses more ink, so try the Clean Printhead option first to save ink. If the ink levels are too low, then you must replace the ink cartridges before you can clean the

printhead nozzles.

1 Load plain paper. 2 From the home screen, navigate to:
> More Options > Align Printer An alignment page prints. Note: Do not remove the alignment page until printing is finished.
From the home screen, navigate to: > More Options > Clean Printhead or Deep Clean Printhead A cleaning page prints.
Using the printer software
For Windows users 1 Click

or Start.

For Windows users 1 Load plain paper. 2 Click
2 Click All Programs or Programs, and then select the printer program folder from the list. 3 Navigate to:
Printer Home > select your printer > Maintenance tab > Clean cartridges
3 Click All Programs or Programs, and then select the printer program folder from the list. 4 Navigate to:
Printer Home > select your printer > Maintenance tab > Align cartridges
4 Follow the instructions on the computer screen. For Macintosh users
Note: This feature is available only in Mac OS X version 10.5 or earlier.
5 Follow the instructions on the computer screen. For Macintosh users
1 Load plain paper. 2 From the Finder desktop, double-click the printer program folder. 3 Select Printer Utility from the list. 4 From the Maintenance tab, select Clean Print Nozzles.

Lexmark Service Center (referred to as Service Center)
Troubleshoot the printer. Access the printer maintenance functions. Contact technical support.
Scan photos and documents. Customize settings for scan jobs.
This program is installed automatically with the printer software. You may be prompted to install this program from the Web,
depending on your printer model. Printing Preferences When you select File Print with a document open and then click Properties, a Printing Preferences dialog appears. The dialog lets you select options for the print job, such as the following:
Customize settings for fax jobs. Create and edit the Contacts list.
View the contents of a memory device inserted into

a network printer.

Select the number of copies to print. Print two-sided copies. Select the paper type. Add a watermark. Enhance images. Save settings.
Transfer photos and PDF documents from a memory
device to the computer over a network.
Note: Printing Preferences is installed automatically with the printer software.
Note: Your printer may not come with some of these programs or some of the functions of these programs, depending on the features of the printer that you purchased.
Use the Lexmark Printer Utility (not available in Mac OS X version 10.6) (referred to as Printer Utility)
Use Get help with cartridge installation. Print a test page. Print an alignment page. Clean the printhead nozzles. Order ink or supplies. Register the printer. Contact technical support. Visit Lexmark SmartSolutions
Visit the SmartSolutions Web site. Choose your custom solutions.
Note: Your printer may not come with these Web Links, depending on the features of the printer that you purchased.
Wireless Setup Assistant (in Mac OS X version 10.6) Set up the printer on a wireless network. or Note: This application is automatically installed with the printer software if the printer has wireless capability. Lexmark Wireless Setup Assistant (in Mac OS X version 10.5 or earlier) (referred to as Wireless Setup Assistant) Uninstaller Remove the printer software from your computer.

you make a selection.

6 Press

to start scanning.

The scan is complete when the application you selected in step 4 opens on the destination computer, and the scan appears within the application as a new file.
6 Compose your e-mail message.
Note: If your e-mail program does not open automatically, then you can scan the document to the computer and then send it through e-mail as an attachment.
Scanning to a flash drive or memory card
Before you begin, make sure your flash drive or memory card is not write protected.
1 Load an original document faceup into the ADF or facedown on the scanner glass. 2 From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder. 3 Double-click Scan Center or All-In-One Center. 4 From the What is being scanned? area on the main screen, select a document type. 5 From the How will the scanned image be used? menu, choose To be viewed on monitor/web
1 Load an original document faceup into the ADF or facedown on the scanner glass. 2 From the home screen, navigate to Scan to Memory Device:
Scan > Scan to Memory Device
3 Insert the flash drive or memory card.
The printer reads only one memory device at a time. If a flash drive is inserted into the USB port while a memory card is in the card slot, then a message
appears on the display prompting you to select which memory device to use.
6 From the Send scanned image to menu, choose an e-mail application. 7 Click Scan.
When the scan is finished, a new e-mail message is created with the scanned document automatically attached.
4 Select the output file type you want to create.
Note: Select the PDF file type if you want to scan multiple pages and save them as one file.
8 Compose your e-mail message.
5 Select the color, resolution quality, and original image size. If necessary, touch Accept each time you

make a selection.

Scanning to a PDF
1 Load an original document faceup into the ADF or facedown on the scanner glass. 2 Click
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has been saved.
Scanning directly to e-mail using the printer software

1 Load an original document faceup into the ADF or facedown on the scanner glass.
Printer Home > select your printer > PDF
Scanning starts and the scan progress dialog appears.
Scanning a document or photo to e-mail
Note: You can attach only one document or photo to each e-mail.
5 Save the document as a PDF.
1 Load an original document faceup into the ADF or facedown on the scanner glass. 2 From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder. 3 Double-click Scan Center or All-In-One Center. 4 From the What is being scanned? area on the main screen, select a document type. 5 Customize the settings as needed. 6 Click Scan. 7 Save the document as a PDF.
2 From the home screen, navigate to Scan to E-mail:

Scan > Scan to E-mail

3 Select the output file type you want to create.
4 Touch an option to enter or select the recipients: Enter E-mail Addressenter the e-mail address manually. Address Booktouch Sort by Name or Sort by Group, and then select the contact. Historyselect the name or e-mail address from the history list.
If necessary, touch OK or Accept each time you make a selection.

Canceling scan jobs

Press on the printer control panel, or click Cancel on the computer screen.
5 To enter additional recipients, touch Add Recipient, and then enter the e-mail address, name, or group
you want to add. Touch Accept every time you add a recipient. Note: You can send an e-mail to up to 30 recipients.

E-mailing

Sending e-mail

Tips for e-mailing

6 Select the file type, color, quality, and original size of the document or photo you want to send. If
necessary, touch Accept to save each setting.
7 If you want to change the default e-mail subject: a Touch Subject. b Enter your subject, and then touch OK. 8 If you want to change the default e-mail message: a Touch Message. b Enter your message, and then touch OK. 9 Press
Make sure to enter your e-mail account information and set up the SMTP server before sending an

e-mail.

Attaching a document or photo to e-mail
1 Insert the flash drive or memory card.
The Memory Device screen appears on the display. Notes:
Make sure the printer is connected to an Ethernet or wireless network before sending an e-mail.
If necessary, make sure the network is connected to the Internet for the printer to communicate with the SMTP server. If the printer cannot connect to the Internet, then contact your system support person. The printer supports only one active network connection (Ethernet or wireless) at a time.

extension cords.

Make sure the printer is turned on.
Make sure the printer is securely connected to the host computer, print server, or other network

access point.

Incorrect language appears on the display
If the "Before you troubleshoot" checklist does not solve the problem, then try the following:
Check the printer for error messages, and resolve any errors. Check for paper jam messages, and clear any jams. Check the ink cartridges, and install new cartridges if necessary. Use the Service Center to locate and solve the problem (Windows only). Turn the printer off, wait about 10 seconds, and then turn the printer back on.
CHANGE THE LANGUAGE USING THE PRINTER MENUS
1 From the home screen, navigate to Use Factory Defaults:
> Use Factory Defaults

2 Touch Yes.

Using the Service Center to solve printer problems
The Service Center provides step-by-step troubleshooting help and contains links to printer maintenance tasks and customer support. To open the Service Center, use one of these methods:
Method 1 If it appears on an error message dialog, click the For additional assistance, use the Service Center link. Method 2
The printer resets and starts the initial printer setup.
3 Complete the initial printer setup.

Printhead errors

printer program folder from the list. 3 Select Printer Home.
REMOVE AND REINSERT THE PRINTHEAD
1 Open the printer and lift the latch.
4 From the Support tab, select Service Center.
If Troubleshooting does not solve your problem
Visit our Web site at support.lexmark.com to find the following:
Knowledgebase articles with the latest information and troubleshooting for your printer Live online technical support Contact numbers for telephone technical support

Setup troubleshooting

Incorrect language appears on the display on page 21 Printhead errors on page 21 Software did not install on page 22 Print job does not print or is missing pages on page 22 Printer is printing blank pages on page 23 Printer is busy or does not respond on page 23 Cannot delete documents from the print queue on page 24 Cannot print through USB on page 24

2 Remove the printhead.

Software did not install
If you encountered problems while installing, or if your printer does not appear in the list in the Printers folder or as a printer option when sending a print job, then try removing and reinstalling the software. Before you reinstall the software, do the following:
MAKE SURE THAT YOUR COMPUTER MEETS THE MINIMUM SYSTEM REQUIREMENTS LISTED ON THE

PRINTER BOX

TEMPORARILY DISABLE SECURITY PROGRAMS IN WINDOWS BEFORE INSTALLING THE SOFTWARE
WarningPotential Damage: Do not touch the printhead nozzles.
3 Wipe the printhead contacts using a clean, lint-free cloth.

CHECK THE USB CONNECTION

1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one. 2 Firmly plug the square end of the USB cable into the back of the printer. 3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with a USB symbol.
Note: If you continue to have problems, then try another USB port on the computer. You may have connected to a defective port.
RECONNECT THE PRINTER POWER SUPPLY
1 Turn off the printer, and then unplug the power cord from the wall outlet. 2 Gently remove the power supply from the printer, and then reinsert it. 4 Reinsert the printhead, and then close the latch until it clicks. 3 Plug the power cord into the wall outlet, and then turn on the printer.
Print job does not print or is missing pages
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
MAKE SURE THE INK CARTRIDGES ARE INSERTED CORRECTLY
1 Turn on the printer, and then open the printer. 5 Close the printer.
Note: If removing and reinserting the printhead does not resolve the error, then contact technical support.
2 Make sure the cartridges are inserted correctly.
The cartridges should click firmly into the matching color slot of the printhead.

3 Close the printer.

SELECT YOUR PRINTER FROM THE PRINT DIALOG BEFORE SENDING THE PRINT JOB (MAC ONLY)
1 With a document open, choose File > Print.
2 From the printer pop-up menu, choose your printer, and then click Print.
If your printer does not appear on the Printer list, then choose Add Printer. From the list of printers in the Default tab, select your printer, and then click Add. If your printer does not appear on the list, then try either of the following:
Printer is printing blank pages
Blank pages may be caused by improperly installed ink cartridges.
For a USB-connected printer, remove and then reconnect the USB cable. For a printer that is wirelessly connected, see the Wireless troubleshooting section.
REINSTALL THE INK CARTRIDGES AND DEEP CLEAN AND ALIGN THE PRINTHEAD
1 Reinstall the ink cartridges, see Replacing ink cartridges on page 10 for more information.
If the cartridges do not seem to fit, make sure the printhead is properly seated, and then try installing the cartridges again.
MAKE SURE THE PRINT JOB IS NOT PAUSED MAKE SURE YOUR PRINTER IS SET AS THE DEFAULT PRINTER RECONNECT THE PRINTER POWER SUPPLY

1 Turn off the printer.

Note: Make sure the printer is not in Power Saver mode. Press and hold off the printer. for three seconds to turn

operation. Any questions on this statement should be directed to: Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232-3000 For additional compliance information, see the online documentation.
This product complies with Part 68 of the FCC Rules. See the product online documentation for additional compliance information.