TTO123 | Cup Holder Mount for TomTom ONE
Package Contents: (1) CM033-2 - 5 Cup holder pedestal mount (1) APTTO - Adapter plate for TomTom ONE (1st, 2nd, and 3rd Editions) Note: mount may not work with adjustable, pop out cup holders or oversize cup holder openings found in full-size pickup trucks. TomTom Device Compatibility: - For use with TomTom ONE 1st, 2nd, and 3rd Editions - APTTO adapter plate NOT compatible with TomTom ONE 30 Series (also known as TomTom ONE 4th Edition)
TomTom and ONE are product names, trademarks, or registered trademarks of TomTom International BV. Arkon Resources, Inc. is not affiliated with TomTom International BV.
APTTO Adapter plate for Adapt TomTom ONE

CM033-2 Cup holder mount

Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road.
Cup Holder Mount Installation
Step 1. Connect the post (A) to the cup holder base (B) by aligning the groove on the base to the ridge inside the bottom of the post.

(D) Angle adjustment nut

TomTom ONE Adapter Plate Installation
Step 1. Slide the adapter plate up into the grooves on the back of the TomTom ONE device.
(C) Thumbwheel adjustment knob

(A) Cup Holder Post

(B) Cup Holder Base
TomTom ONE Pedestal Adjustment and Device Attachment
Step 1. Step 2. Adjust the lateral angle of the pedestal head by tightening the angle adjustment nut (D). Attach the device cradle to the pedestal by inserting the dual T-Tabs of the pedestal (E) into the T-slots of the adapter plate (F).

(E) (D)

Step 2.
Place the universal cup holder mount into the vehicles cup holder. Adjust the thumbwheel adjuster (C) to expand or close the cup holder prongs to fit in the cup holder. For oversize cup holder openings or the adjustable pop out cup holders use the optional self-adhesive side support pads (G). Install the pads by removing the adhesive backing and placing it on the flat surface side of the cup holder support leg.

Step 3.

(G) Optional support pads
Safety Precautions Do not install Arkon products over an air bag cover or within the air bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or air bag deployment. Arkon is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of this pedestal mount.
The Mobile Mounting Specialists Consumer Hotline: USA (800) 841-0884 INTL (626) 254-9005 Monday - Friday 9 am - 5 pm, PST www.arkon.com Arcadia, CA 91006 USA Designed in USA | Made in Taiwan Copyright 2008 Arkon Resources, Inc.

TTO125 | Floor or Console Mount for TomTom ONE GPS
Package Contents: (1) CM088-TS-2 - 15 Flexible steel gooseneck floor or console mount Includes: (1) Seat Bolt Bracket (1) Floor / Console Bracket (1) Flexible Steel Shaft with Plastic Tubing (4) Screws and (4) Plastic Caps (1) APTTO - Adapter plate for TomTom ONE (1st, 2nd, and 3rd Editions)
TomTom Device Compatibility: - For use with TomTom ONE 1st, 2nd, and 3rd Editions - APTTO adapter plate NOT compatible with TomTom ONE 30 Series (also known as TomTom ONE 4th Edition)
TomTom, ONE, and GO are product names, trademarks, or registered trademarks of TomTom International BV. Arkon Resources, Inc. is not affiliated with TomTom International BV.
APTTO TomTom ONE Adapter Plate CM088-TS-Flexible Floor Mount
Notes: 1. Tool for Seat Bolt mounting - socket wrench 2. Tools for optional Floor or Console mounting - drill and screwdriver
Passenger Seat Bolt Mounting For a simple mount that can be easily moved to another vehicle, install using the passenger seat bolt. Step 1. Screw the flexible steel shaft into the Seat Bolt Bracket.
Floor or Console Mounting For a more permanent mount, connect the Floor / Console Mount Bracket to the floor or console. This will require drilling into your vehicles interior surface.
Pedestal Head Adjustments Step 1. Adjust the steel shaft by bending with both hands to the desired location of the male dual T head. Step 2. Use the adjustment knob and wing nut on the pedestal head to swivel or rotate the head position if necessary.
Console Mount Step 2. With a socket wrench, loosen the passenger seat bolt, insert the Seat Bolt Bracket, and retighten the seat bolt.
Floor Mount Step 1. Position the Floor / Console Bracket and drill into the floor or console. Step 2. Attach the Floor / Console Bracket with screws and cover with plastic caps. Step 3. Screw the steel shaft into the Floor / Console Bracket.
Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road.
Adapter Plate Installation - continued on other side
Safety Precautions Do not install Arkon products over an air bag cover or within the air bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or air bag deployment. Arkon is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of this pedestal mount.
The Mobile Mounting Specialists Consumer Hotline: USA (800) 841-0884 INTL (626) 254-9005 Monday - Friday 9 am - 5 pm, PST www.arkon.com Arcadia, CA 91006 USA Designed in USA | Made in Taiwan Copyright 2008 Arkon Resources, Inc.
TomTom ONE Adapter Plate and Device Attachment
Step 1. Slide the adapter plate (D) up into the grooves on the back of the TomTom ONE device (E).

Step 2.

Attach the device to the pedestal by inserting the dual T-slots on the adapter plate (F) to the dual T-tabs on the mount head (G).
Do not twist the adapter plate or TomTom device while mounted on top of the pedestal to adjust the steel shaft as this can break the dual T-grooves.