This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3.

DWL-810+

D-Link AirPlus
Ethernet-to-Wireless Bridge

Before You Begin

You must have at least the following: An Ethernet-enabled device, such as a game console, laptop or desktop computer, network printer or set-top box that will connect to the DWL-810+
Check Your Package Contents
DWL-810+ Ethernet-to-Wireless Bridge
CD-ROM (Manual and Warranty)
Ethernet (CAT5 UTP) Cable
Using a power supply with a different voltage rating will damage this product and void its warranty.

5V DC 2.5A Power Adapter

If any of the above items are missing, please contact your reseller.
2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-810+ 04162003
Connecting the DWL-810+ to your Ethernet-enabled device
A. First, connect the power adapter to the receptor at the back panel of the DWL-810+ and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. B. Insert one end of an Ethernet cable (included) to the Ethernet port on the back panel of the DWL-810+ and connect the other end to the Ethernet port located on the device (e.g., a Set Top Box, Gaming Console, laptop or desktop computer, or network printer.) The LED light will blink when there is data tranfer through the wireless connection. (Note: The Ethernet port on the DWL-810+ is Auto-MDI/MDIX. Meaning you can use a straight-through or crossovercable to the Ethernet Port.) C. The antenna is used by the DWL-810+ to connect to other 802.11b wireless devices.
C. Antenna Used to wirelessly connect to 802.11b networks. B. LAN Port This is the connection for Ethernet cables to your Ethernet-enabled device.
A. Receptor for Power Adapter
Connecting the DWL-810+ in Infrastructure Mode

Setup #1

Connect an Ethernet cable from the DWL-810+ to your Ethernet enabled: Desktop PC, Laptop PC, Set-Top-Box, or Gaming Console.
Connecting the DWL-810+ in Ad-Hoc Mode

Setup #2

Web-based Configuration
Before You Begin the Configuration
Its best to use a computer (with an Ethernet adapter) that is connected to a switch for configuring the DWL-810+. (Note: You also have the option of connecting the DWL810+ directly to the computer that will be used for configuration). The default IP address for the DWL-810+ is 192.168.0.30 with a Subnet Mask of 255.255.255.0. You will need to assign your computer a Static IP address within the same range as the DWL-810+s IP address for the purpose of configuring the DWL-810+. See the Manual on the CD-ROM if you need assistance in assigning a Static IP address for your network adapter.
Open your Web browser and type http://192.168.0.30 into the URL address box. Then press the Enter or Return key. 4

Continued.

The logon pop-up screen will appear.
Type admin for the username and leave the password field blank.

Click OK

Once you have logged in, the Home screen will appear. Click Run Wizard
You will see the following screens.

Click Next

Step 1 - Set up your new password. You have the option to establish a password.
Step 2 - Wireless Setup The default wireless settings are: SSID = default Channel = 6 Operating Mode = Infrastructure Click Site Survey to select a wireless network or you can change the settings manually to match an existing wireless network. For Set Up #2 select Ad-hoc as the operating mode. Click Next Step 3 - Encryption The DWL-810+ is capable of three levels of wireless encryption - 64-bit, 128-bit, and 256-bit. By default the encryption is disabled. You can change the encryption settings for more secure wireless communication.

Click Restart

Click Close
You have completed the Configuration of the DWL-810+!

Appendix

Xbox Setup
Step 1 - Please refer to Step 4 for configuring and modifying the wireless settings of the DWL810+

Step 2 - Connect an Ethernet cable from the DWL-810+ to the Ethernet port on the back of your Xbox.
In order to connect to the XBox Live service, you will need to have the proper XBox Live equipment and account.

PlayStation 2 Setup

Step 2 - Connect an Ethernet cable from the DWL-810+ to the Ethernet port on the back of your PlayStation 2.
Assigning a Static IP Address in Windows
To assign a Static IP Address to the laptop or computer that you are using to configure the DWL-810+, please do the following:
Note: The following screens are taken using Windows XP. Your screens may look similar.
Go to Start > Double- click on Control Panel > Double-click on Network Connections > Right-click on Local Area Connections > Click Properties
Highlight Internet Protocol (TCP/IP) Click Properties
Select Use the following IP address in the Internet Protocol (TCP/IP) Properties window Input your IP address and subnet mask. (The IP Address must be within the same range as the DWL-810+. The IP Address of the DWL-810+ is 192.168.0.30. You can assign 192.168.0.51 for your computer. No two computers can have the same IP Address. Assign a subnet mask of 255.255.255.0.) Click OK
For Apple Macintosh OS X:
Go to the Apple Menu Click on Network and Select System Preferences

Click on Network

Select Built in Ethernet in the Show pull-down menu
Select Using DHCP in the Configuration pulldown menu
The IP address information, the Subnet Mask, the Routers IP address and the Ethernet adapter address will appear Click on Apply Now

Technical Support

You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.
Tech Support for customers within the United States:
D-Link Technical Support over the Telephone: (877) 453-hours a day, seven days a week. D-Link Technical Support over the Internet: http://support.dlink.com email:support@dlink.com

Tech Support for customers within Canada:
D-Link Technical Support over the Telephone: (800) 361-5265 Monday to Friday 8:30am to 9:00pm EST D-Link Technical Support over the Internet: http://support.dlink.ca email:support@dlink.ca

Web-based Configuration will require a current web browser, i.e., Internet Explorer 5.x, Netscape Navigator 4.x.

DWL-810

D-Link Air
Ethernet-to-Wireless Bridge

Before You Begin

You must have at least the following: An Ethernet-enabled device, such as a game console, laptop or desktop computer, network printer or set-top box that will connect to the DWL-810
Check Your Package Contents
These are the items included with your DWL-810 purchase:
DWL-810 Ehternet to Wireless Bridge
CD-ROM (Manual and Warranty)
Ethernet (CAT5 UTP) Cable

5V DC 2.5A Power Adapter

If any of the above items are missing, please contact your reseller.
Using a power supply with a different voltage rating will damage this product and void its warranty.
2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-810 10182002
Connecting the DWL-810 to your Ethernet-enabled device
A. First, connect the power adapter to the receptor at the back panel of the DWL-810 and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. B. Insert one end of the Cross-Over Ethernet cable (included) to the Ethernet port on the back panel of the DWL-810 and connect the other end to the Ethernet port located on the device (e.g., a Set Top Box, Gaming Console, laptop or desktop computer, or network printer.) The LED light will blink when there is data tranfer through the wireless connection. C. The antenna is used by the DWL-810 to connect to other 802.11b wireless devices.
C. Antenna Used to wirelessly connect to 802.11b networks. B. LAN Port This is the connection for Ethernet cables to your Ethernet-enabled device.
A. Receptor for Power Adapter
Connecting the DWL-810 in Infrastructure Mode
No configuration of the DWL-810 is needed if your setup is similar to Setup #1.

Setup #1

Connect a cross-over cable from the DWL-810 to your Ethernet enabled: Desktop PC, Laptop PC, Set-Top-Box, or Gaming Console.
Connecting the DWL-810 in Ad-Hoc Mode
Configuration of the DWL-810 is needed if your setup is similar to Setup #2.

Setup #2

Web-based Configuration
Before You Begin the Configuration
Its best to use a computer (with an Ethernet adapter) that is connected directly to the DWL-810 for configuration. The default IP address for the DWL-810 is 192.168.0.30 with a Subnet Mask of 255.255.255.0. You will need to assign your computer a Static IP address within the same range as the DWL-810s IP address in order to configure the DWL-810. See the Appendix in this Quick Installation Guide if you need assistance in assigning a Static IP address.
Open your Web browser and type http://192.168.0.30 into the URL address box. Then press the Enter or Return key.

Continued.

The logon pop-up screen will appear.
Type admin for the username and leave the password field blank.
Click OK The configuration window will open, as shown. Click Wireless in the Configuration menu. This screen will appear. Select Ad-Hoc The default wireless settings are: SSID = default Channel = 6 You can change the SSID and Channel settings to match an existing Ad-Hoc wireless network.

Click Apply

Changes will not take effect until you reboot the DWL-810. To reboot, click on Admin at the top of this screen. In the Admin window, click reboot to save the changes.

You have completed the Configuration of the DWL-810!

Appendix

Assigning a Static IP Address in Windows
To assign a Static IP Address to the laptop or computer that you are using to configure the DWL-810, please do the following:
Note: The following screens are taken using Windows XP. Your screens may look similar.
Go to Start > Double- click on Control Panel > Double-click on Network Connections > Rightclick on Local Area Connections > Click Properties
Highlight Internet Protocol (TCP/IP) Click Properties
Select Use the following IP address in the Internet Protocol (TCP/IP) Properties window Input your IP address and subnet mask. (The IP Address must be within the same range as the DWL-810. The IP Address of the DWL-810 is 192.168.0.30. You can assign 192.168.0.51 for your computer. No two computers can have the same IP Address. Assign a subnet mask of 255.255.255.0.) Click OK

Technical Support

You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone. D-Link Technical Support over the Telephone: (877) 453-hours a day, seven days a week D-Link Technical Support over the Internet: http://support.dlink.com email: support@dlink.com