Kodak EasyShare G600 printer dock

Users guide

www.kodak.com For interactive tutorials, www.kodak.com/go/howto
Eastman Kodak Company Rochester, New York 14650 Eastman Kodak Company, 2006 All screen images are simulated. Kodak, EasyShare, ImageLink, and XtraLife are trademarks of Eastman Kodak Company. P/N 4J4599_en

Product features

Front/top/side view
1 Power button/light 2 (4-way button) 3 Print button/light 4 Red-eye reduction button/ light 5 Print Layout button 6 Transfer button/light 7 Paper tray 8 Paper-tray cover

Paper-tray door

10 Paper-tray chamber 11 Pull-out handle 12 USB device connector (for compatible USB devices) 13 Paper status indicator light 14 Camera connector 15 Camera battery status light 16 Cartridge status indicator light

www.kodak.com/go/support

Back/top/side view
Connector cover release tab Color cartridge (shown installed) Cartridge-release tab Cartridge door
USB connector (to computer) Power connector (DC-in) Cooling vent Paper path slot Connector cover for optional battery

Table of contents

1 Getting started...1
Finding a location for your printer dock... 1 Handling and storing the cartridge and paper.. 1 Attaching the custom camera insert... 2 Connecting the power... 3 Loading the paper and cartridge... 4 Inserting and removing the paper tray... 6
2 Setting up your digital camera..7
Docking and charging the camera... 7 Best camera setting for 4 x 6 inch (10 x 15 cm) prints.. 10
3 Printing without a computer...11
Printing from your digital camera... 11 Selecting pictures on your camera for printing... 12 Printing tagged pictures... 12 Printing from a PictBridge compatible device.. 13 Changing the printed picture layout... 14 Printing pictures on the same sheet... 16 Reducing red eye in your prints... 18 Canceling printing.... 19
4 Installing software...20
Installing the software... 20
5 Using the printer dock with a computer...22
Connecting to a computer... 22 Transferring pictures from your digital camera... 23
Printing from a computer.... 24 Canceling printing.... 27
6 Using the printer dock with a USB flash drive..28
Printing pictures from a USB flash drive.. 28 Canceling printing.... 29 Copying pictures to a USB flash drive... 30 Canceling copying to a USB flash drive... 32
7 Printer dock portability..33
Taking your printer dock with you... 33 Powering your printer dock with a battery... 35
8 Maintenance and firmware upgrade...38
Maintaining your printer dock... 38 Upgrading your printer dock firmware.. 40

9 Troubleshooting....41

Printing problems... 41 Transfer/communication problems... 48 Printer-dock-status lights.... 49

10 Getting help...55

Helpful links... 55 Telephone customer support... 56

11 Appendix...57

Printer dock specifications... 57 Important safety instructions... 58 Extending battery life.... 60 Upgrading your software and firmware... 61 Additional care and maintenance... 61 Warranty.... 62 Regulatory information... 64

Getting started

Finding a location for your printer dock
Place the printer dock on a flat, clean, dust-free surface, in a dry location, and out of direct sunlight.

5 in. (12.7 cm)

Allow at least 5 in. (12.7 cm) clearance from the back of the printer dock for paper travel. For proper ventilation, make sure the top and back of the printer dock are not blocked. When connecting power or USB cables, keep the cables clear of the paper path to the front and rear of the printer dock.
Avoid areas where ventilation ducts, open doors, or frequent passersby might expose the printer dock and paper to high levels of dust and debris. Airborne dirt particles can affect picture quality. Allow enough space on all sides of the printer dock to let you connect and disconnect cables, change the cartridge, and add paper.
Handling and storing the cartridge and paper

Cartridge

I I I I
Keep cartridges out of the reach of children. For best quality prints, store the cartridge in a location where the temperature does not exceed 85F (30C). To avoid getting fingerprints on the ribbon, handle the cartridge by the spool ends. Keep the cartridge away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun). 1

Cartridge:

See Handling and storing the cartridge on page 1.

To load the cartridge:

Open the cartridge door.
Insert the cartridge into the chamber until it clicks into place.

Cartridge light

Rotate the cartridge spool clockwise just enough to remove the ribbon slack.

Cartridge-release tab

Close the cartridge door. To remove the cartridge, push up on the Cartridge-release tab then pull out the cartridge.
IMPORTANT: Too many rotations may reduce the number of prints you can make.
IMPORTANT: Remove the cartridge when the cartridge light glows red (see page 49). The cartridge may lock if there is a paper error. Clear the paper error (see page 41) and make sure the paper light is off before you remove the cartridge.
Inserting and removing the paper tray

Inserting the paper tray

Open the paper-tray door.
Slide the paper-tray into the paper-tray chamber until it snaps into place. (Make sure the hinged section is open).

Paper light

Removing the paper-tray
Reload the paper-tray when the paper light glows red.
Pull the paper-tray out to remove it.
When storing or traveling with your printer dock, close the paper-tray cover and paper-tray door to keep out dust and debris. IMPORTANT: Make sure you store the paper-tray in the space provided on the bottom of the printer dock (see page 33).
Setting up your digital camera
Docking and charging the camera
Docking your digital camera lets you make prints directly from the camera, transfer pictures from the camera to the computer, and charge the camera battery. IMPORTANT: To charge your camera battery, your printer dock must be powered by the AC adapter (not the printer battery). This printer dock is ImageLink print-system compatible. You can dock not only Kodak EasyShare digital cameras, but other brands of ImageLink system-compatible digital devices. NOTE: Not all cameras are compatible for charging on the G600 printer dock. See your camera users guide for dock compatibility.

Docking the camera

1 Attach a custom camera insert to the printer dock (see page 2). 2 Load a Kodak Ni-MH rechargeable digital camera battery KAA2HR, or a Kodak Li-Ion rechargeable digital camera battery into the camera for charging. See your camera users guide. NOTE: Your printer dock charges only Kodak Ni-MH KAA2HR and Li-Ion rechargeable batteries. 3 Place the camera on the printer dock. Push camera down to seat the connector. The battery status light on the printer dock lights up and an initializing message appears on the camera. NOTE: If the printer dock is turned off when you dock the camera, the printer dock turns on and initialises.

Changing the printed picture layout
1 Follow the steps (except for Press ) to print from your digital camera (page 11) or PictBridge compatible device (page 13). NOTE: You can only change the picture layout if a device with a display screen is docked or connected to your printer dock. 2 Press the Print Layout button,
Picture Layout setting 1-up (full photo) 2-up 4-up (wallet size) 9-up (mini photo)
, repeatedly to select a picture layout:
Number and size of prints per sheet One 4 x 6 in. (102 x 152 mm) picture Up to two 3 x 4 in. (76 x 102 mm) pictures Up to four 2 x 3 in. (51 x 76 mm) pictures Up to nine 1.3 x 2 in. (34 x 51 mm) pictures

3 Press

to return to the main review screen. Press

again to begin printing.

To change the default picture layout: Select a picture-layout, then press and hold the Print Layout button, , for 45 seconds. The cartridge and paper status lights blink red for 2 seconds then turn off. The selected picture layout appears on the docked camera screen.
Effect of picture layout on number of copies
When printing tagged pictures (see page 12), the number of copies that are printed is determined by the setting on your camera or device. For example, if three pictures on your camera are each tagged for printing one copy, and the 4-up option on the printer dock is selected, three 2 x 3 in. (51 x 76 mm) pictures are printed on one sheet of paper. For best results, use your cameras 3:2 picture size setting to avoid cropping (see your camera users guide). NOTE: When printing from a PictBridge compatible device (see page 13), picture size and number of copies are determined by the devices multi-up and copies settings. Change these settings on your device before printing. If the picture layout selected on your device does not match any of the sizes on the printer dock, then the closest picture layout on the printer dock is automatically selected.
Printing pictures on the same sheet
You can select different pictures or more than one copy of a picture to print on the same sheet. IMPORTANT: Do not press until after you choose the print layout.
Different pictures on the same sheet
1 Select one copy of each picture on your docked camera (page 11) or on your camera prior to docking (page 12). 2 Press the printer dock Print Layout button repeatedly to scroll through and select either 2-up , 4-up , or 9-up , depending on the picture layout you wish to print (see page 14). 3 Press to begin printing.

Duplicate pictures on the same sheet
Method 1: using the digital camera 1 Select two or more copies of a picture on your docked camera (page 11) or on your camera prior to docking (page 12). IMPORTANT: To fill up a sheet with duplicate copies, the number of copies you choose for the tagged pictures on your camera must match the number of prints in the picture layout you choose in step 2. 2 Press the printer dock Print Layout button repeatedly to select either 2-up , 4-up , or 9-up , depending on the picture size you wish to print (see page 14). 3 Press to begin printing. Method 2: using the printer dock and docked camera 1 Place the camera on the printer dock. The current or most recent picture appears on the camera screen. 2 Press print. (4-way button) on the printer dock to review and choose a picture to
3 Press on the printer dock to select the print quantity. IMPORTANT: Make sure the print quantity you choose matches the number of prints in the picture layout you choose in step 4. 4 Press the Print Layout button repeatedly to select either 2-up , 4-up 9-up , depending on the picture size you wish to print (see page 14). 5 Press to begin printing. The print screen appears.
NOTE: If you dont press any buttons after 5 seconds, printing starts automatically.
Reducing red eye in your prints
Your printer dock incorporates technology that automatically detects and corrects red eye in your subjects before you print your pictures.
Your printer dock defaults to red-eye reduction being always on, and the Red-eye reduction button/light, , glows green. Red-eye reduction is applied to images that were captured using the flash on your digital camera. The Red-eye reduction button is disabled when printing from a computer. If printing from a computer (see page 24), make sure Kodak EasyShare software is installed on the computer. Printing may slightly increase when using red-eye reduction. Your printer dock may apply red-eye reduction to an area such as a sunburn, which darkens the area in your print. Turn off red-eye reduction.
To turn red-eye reduction off, press the Red-eye reduction button,
To change the red-eye reduction default to off, press and hold the Red-eye reduction button, , for 5 seconds. The Red-eye-reduction light blinks, then turns off.

Canceling printing

To cancel printing, do one of the following: Press. A confirmation screen appears. Printing is cancelled when you select that you are sure you want to cancel printing. I Press and hold for 2 seconds. Printing is cancelled automatically. NOTE: When printing is cancelled, the paper is ejected from the printer dock. If you cancel a print during the fourth pass (clear coat), the print is ejected upon completion.

Installing software

Installing the software
1 Close all software applications that are open on your computer (including anti-virus software). 2 Place the Kodak EasyShare software CD into the CD-ROM drive. 3 Load the software: Windows OSif the install window does not appear, choose Run from the Start menu and type d:\setup.exe where d is the drive letter that contains the CD. Mac OS Xdouble-click the CD icon on the desktop, then click the Install icon. 4 Follow the on-screen instructions to install the software. Select Complete to automatically install the most commonly used applications. Select Custom to choose the applications you wish to install. IMPORTANT: To use the printer dock with a computer, you must install the printer driver. If you choose Custom, make sure the printer dock is selected. The printer driver is automatically installed if you choose Complete.
Add the printer for Mac OS X: a Open the finder window and click the Applications button. If you dont see the Applications button, open the Applications folder on your operating drive. b Open the Utilities folder, then double-click Print Center. c In the Printer List window, click the Add Printer button. d Select the printer dock, then click Add. The printer dock is added to your computer.
IMPORTANT: When prompted, take a few minutes to electronically register your printer dock and software. This lets you receive information regarding software updates and registers some of the products included with the printer dock. You must be connected to your Internet service provider to register electronically. To register later, visit www.kodak.com/go/register. 5 Restart the computer if prompted. If you turned off anti-virus software, turn it back on. See the anti-virus software manual for details. For more information on installing the software, see the ReadMe file on the Kodak EasyShare software CD. For information on the software applications included on the Kodak EasyShare software CD, click the Help button in the EasyShare software.

For more information on batteries, see www.kodak.com/go/batterytypes.
Maintenance and firmware upgrade
Maintaining your printer dock
IMPORTANT: Always disconnect the power before cleaning. Do not use harsh or abrasive cleaners or organic solvents on the printer dock or any of its parts.
To clean, wipe the outside of the printer dock with a clean, dry cloth.

I I I I I

Support the printer dock and tray by placing it on a flat, level surface. Do not block the cooling vents. Avoid blocking the back of the printer dock and paper-tray exit. Keep power and USB cables away from the paper path. Keep the surrounding area vacuumed and litter-free. Protect the printer dock from tobacco smoke, dust, sand, and liquid spills.
Avoid placing objects on the printer dock. Keep the printer dock, accessories, and supplies away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun). When storing, remove the paper tray, then close the paper-tray cover (see page 2) and paper-tray door to keep out dust and debris. Store paper flat.
Cleaning the paper-feed rollers
To prevent misfeeds and to make sure your pictures look their best, we recommend that you keep the paper-feed rollers clean. Inspect the rollers weekly for debris particles, and clean, if necessary. IMPORTANT: Unplug the power before cleaning the paper-feed rollers. 1 Unplug the AC power cord from the power outlet. 2 Remove the paper tray from the printer dock, and leave the paper-tray door open. 3 Lightly moisten a lint-free cloth with water. IMPORTANT: Do not use cotton swabs to clean the paper-feed rollers. 4 Use the moistened cloth to gently wipe clean the surface of the paper-feed rollers. Advance the feed rollers with your thumb, as necessary, and continue cleaning. 5 Allow the paper-feed rollers to fully dry before reconnecting the power.

Paper-feed rollers

Upgrading your printer dock firmware
IMPORTANT: To upgrade the firmware, your printer dock must be powered by the AC adapter (not the printer battery).

From your computer

Connect your printer dock to your computer (see page 22). Download the latest version of the printer dock firmware (the software that runs on the printer dock) to your computer. Visit www.kodak.com/go/printerdockdownloads.
From your USB flash drive
1 Transfer the latest version of the printer dock firmware file from your computer to your USB flash drive System or Service folder. 2 Connect your printer dock to the AC power adapter (see page 3), and dock your camera to the printer dock (see page 7). 3 Connect the USB flash drive to your printer docks USB device connector (see page 28). The printer dock automatically checks the firmware file version on the flash drive. 4 Press Print, , on your printer dock to begin the firmware upgrade. buttons on the printer dock to To exit the firmware upgrade process, use the select Exit on the camera.

5 Follow your cameras on-screen instructions. The Red-eye, Transfer, and Print buttons blink until the upgrade is complete. Blinking stops approximately 5 seconds after the upgrade is complete. 6 Remove the USB flash drive and power your printer dock off, then on again.

Troubleshooting

For step-by-step product support, visit www.kodak.com/go/g600support and select Interactive Troubleshooting and Repairs. Select FAQs to learn how to perform a Diagnostic test (identifies common problems).

Printing problems

If. Try the following Paper does not IMPORTANT: Use only Kodak color cartridge & paper kits (with symbol) for your printer dock. Do not use inkjet paper. feed (Paper light may I The paper-tray may be empty. Load paper (page 4), re-install the tray, glow red) then press. I Check the paper:
1 Remove the paper-tray (page 6). 2 Inspect the paper supply. Make sure the paper is not damaged.
Replace with new paper, if necessary.
3 Carefully "fan" the paper to keep the sheets from sticking together. 4 Reload the tray. Do not load more than 30 sheets of paper (see upper limit line, , inside tray). 5 Re-install the tray, then press to resume printing.
I Clean the paper-feed rollers (page 39).
Multiple sheets 1 Remove the paper-tray (page 6). of paper are 2 Remove the paper supply from the tray. Carefully "fan" the paper to pulled through keep the sheets from sticking together. printer 3 Reload the tray. Do not load more than 30 sheets of paper (see

upper limit line,

, inside tray).

to resume printing.

4 Re-install the tray, then press

If. Try the following

IMPORTANT: Use only Kodak color cartridge & paper kits (with Printer is symbol) for your printer dock. Do not use inkjet paper. jammed (Paper or Color- I If the Paper light blinks quickly: cartridge light 1 Remove the paper-tray (page 6). may glow 2 Disconnect the power from the printer dock for 10 seconds, then red/amber) reconnect the power. Carefully remove the paper if it does not automatically eject. IMPORTANT: Always check the paper slot on the back of the printer dock for jammed paper:

print head from overheating.
I Move the printer dock from direct sunlight; operate in a
temperature-controlled environment.
I Do not block the cooling vents; keep them clean (page 1). I Close unnecessary software applications. I Make sure your computer meets the minimum system requirements.
Upgrade your system, if necessary (see Helpful links, page 55).
IMPORTANT: The cartridge may lock in place if there is a paper error. Unable to Do not attempt to remove the cartridge without first remove color cartridge (paper clearing the paper error. Make sure the Paper light is off light may glow before attempting to remove the cartridge (see Paper red) light (page 49).
I Reload or fill the paper-tray (page 4). I Clear paper jam (page 41). I Disconnect then reconnect the power.
IMPORTANT: Upon reconnecting the power, the color cartridge may advance to the next picture slot on the ribbon, resulting in a supply mismatch.
Paper runs out I Supply mismatch can result from several different situations, including: before the color Scrapping of paper as a result of jams or other errors. cartridge (or Gradual advancement of the color-cartridge ribbon from removing vice versa) ribbon slack or clearing jams. Advancement of the color-cartridge ribbon upon reconnecting power to unlock the color cartridge. Supply mismatch is likely to occur as you continue to use your printer dock. If you wish to keep your cartridge and paper supply synchronized, discard unused cartridge or paper when one or the other is fully depleted.
Transfer/communication problems
If. Try one or more of the following , on the printer dock. Nothing happens I Press the Transfer button, when you try to I Check the power and USB connections from the printer dock to the transfer pictures to computer (page 22). the computer I Reseat the camera on the printer dock (page 7). I Remove the docked camera (page 7). Check the USB connections between the printer dock and the USB flash drive (disconnect then reconnect them to re-establish the connection). I Close unnecessary software applications and minimize remaining application windows. Follow any messages on the screen that may have been hidden by other windows. I Disconnect then reconnect the USB cable from the printer dock to the computer (page 22). I Make sure your computer meets the minimum system requirements. Upgrade your system if necessary (see Helpful links, page 55). I Install Kodak EasyShare software (page 20). If you choose Custom installation, make sure to install the printer driver. I Uninstall, then reinstall Kodak EasyShare software (page 20).

Printer battery charging status Light status Cause Action/solution
NOTE: Your printer dock uses the Power button,
, light to show the printer battery charging status.
Printer battery able to provide power for only a limited number of prints. Charge the printer battery (see page 36).
Printer battery power nearly depleted.
Light glows amber Light blinks green Light glows green Light blinks red Light glows red
Printer battery less than fully Printer battery working normally. charged. Battery charging. Battery fully charged. Battery error. Battery needs charging. None required. None required. Attach a new printer battery (see page 35). Charge the printer battery (page 36).
Still having problems? Visit www.kodak.com/go/support, or see Chapter 10, Getting help, or contact your camera manufacturer.

10 Getting help

Helpful links
Printer dock Email, write, or phone Kodak Get support for your product (FAQs, troubleshooting information, etc.) www.kodak.com/go/contact www.kodak.com/go/g600support
Purchase full range of digital camera and www.kodak.com/go/accessories dock accessories. Download latest printer dock software, www.kodak.com/go/printerdockdownlo firmware and drivers ads See online tutorials www.kodak.com/go/howto Software Get information on EasyShare software www.kodak.com/go/easysharesw (or click the Help button in the EasyShare software) Get help with the Windows operating www.kodak.com/go/pcbasics system and working with digital pictures Other Get support for Kodak docks, cameras, software, accessories, more Get information on Kodak EasyShare printer docks Get information on Kodak inkjet products Optimize your printer for truer, more vibrant colors Register your printer dock www.kodak.com/go/support www.kodak.com/go/printerdocks www.kodak.com/go/inkjet www.kodak.com/go/onetouch www.kodak.com/go/register

Getting help

Telephone customer support
If you have questions concerning the operation of the software or printer dock, you may speak with a customer support representative. Before you call, have the printer dock connected to your computer and the following information available: I Computer model, Operating system I Printer dock serial number

Processor type and speed (MHz) Amount of memory (MB) and free hard disk space
Version of Kodak EasyShare software Exact error message you received

888 9600

Australia Austria Belgium Brazil Canada China Denmark Ireland Finland France Germany Greece Hong Kong India Italy Japan Korea Netherlands
New Zealand Norway Philippines

Poland

Portugal Russia Singapore Spain Sweden Switzerland Taiwan Thailand

00800 4411625

00800 44140775

Turkey

United Kingdom United States International Toll Line International Toll Fax

00800 448827073

(toll) ++458 6962

11 Appendix

Printer dock specifications
For more specifications, visit www.kodak.com/go/printerdocks.
Printer dock specifications Printing process Operating environment (for optimum picture quality) Power Continuous tone, thermal dye transfer, full-bleed Temperature: 50 to 95 F (10 to 35 C) Humidity: 10% to 86% RH Output: 24 V DC Input: 100 V to 120V AC @ 50/60 Hz, via AC power adapter (US and Canada only) 100 V to 240V AC @ 50/60 Hz, via AC power adapter (all other countries) Consumption while printing: 60 watts maximum Approximately 60 seconds for full 4 x 6 in. (102 x 152 mm) print NOTE: First print may take an additional 15 seconds when printing from camera. Print speed is dependent on picture size, number of continuous prints, and environmental conditions. Size Without paper tray: 3.9 in x 7.1 in x 3.7 in (99 mm x 180 mm x 95 mm) With paper tray: 3.9 in x 7.1 in x 4.7 in (99 mm x 180 mm x 120 mm) Weight Without paper tray: 62.3 ozs (1769 grams) With paper tray: 67.6 ozs (1916.5 grams)

Print speed

Appendix
Printer dock specifications Print size Paper size Picture resolution 4 x 6 in. (102 x 152 mm) 4 x 6 in. (102 x 152 mm) 300 ppi, continuous tone
Important safety instructions

Using this product

Read and follow these instructions before using Kodak products. Always follow basic safety procedures. The use of an accessory attachment that is not recommended by Kodak, such as an AC adapter, may cause fire, electric shock, or injury. CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures. Kodak AC adapters and battery chargers are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards.
For more information on batteries, visit www.kodak.com/go/batterytypes.

Extending battery life

Limit the following activities that quickly deplete battery power: Reviewing your pictures on the camera screen Using the camera screen as a viewfinder Excessive use of the flash
Dirt on the battery contacts can affect battery life. Wipe the contacts with a clean, dry cloth before loading batteries in the camera. Battery performance is reduced at temperatures below 5 C (41 F). When using your camera in cold weather, carry spare batteries and keep them warm. Do not discard cold batteries that do not work; when they return to room temperature, they may be usable. If you are getting fewer than 20 pictures per charge with your Kodak Ni-MH rechargeable digital camera battery, (and if none of the tips above seem to help), consider refreshing the battery (see page 9) or replacing it.

For more information on batteries, see your camera users guide, or visit www.kodak.com/go/batterytypes.
Upgrading your software and firmware
Download the latest versions of the software included on the Kodak EasyShare software CD and the printer dock firmware (the software that runs on the printer dock). Visit www.kodak.com/go/printerdockdownloads.
Additional care and maintenance
Do not allow chemicals, such as suntan lotion, to come into contact with the painted surface of the printer dock. If the printer dock has been subjected to inclement weather or you suspect water has gotten inside the printer dock, turn off the printer dock and remove the paper tray and color cartridge. Allow all components to air-dry for at least 24 hours before using the printer dock again. If this does not resolve the problem, contact customer support (see page 56). Connect a tripod directly to the camera; do not connect a tripod to the camera dock or printer dock. Service agreements are available in some countries. Contact a dealer of Kodak products for more information. This equipment is considered to be electronic equipment and contains parts that are recyclable. As such, this equipment should not be incinerated or disposed of in a landfill. Disposal of this equipment may be regulated in some jurisdictions due to environmental considerations. Disposal of color cartridges should be done in accordance with applicable regulations. For more disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at www.eiae.org.

Warranty

Limited Warranty
Kodak warrants Kodak digital cameras and accessories (excluding batteries) to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.
Limited warranty coverage
This limited warranty will be honored only within the geographical location that Kodak digital cameras and accessories were purchased. Kodak will REPAIR or REPLACE Kodak digital cameras and accessories if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Such repair service will include all labor as well as any necessary adjustments and/or replacement parts. Such repair or replacement is the sole remedy under this warranty. If replacement parts are used in making repairs, these parts may be remanufactured, or may contain remanufactured materials. If it is necessary to replace the entire product, it may be replaced with a remanufactured product.

Limitations

Request for Warranty service will not be accepted without proof of date of purchase, such as a copy of the original dated Kodak digital camera or accessory sales receipt. (Always keep the original for your records.) This warranty does not apply to the battery(s) used in digital cameras or accessories. This warranty does not cover circumstances beyond Kodaks control, nor problems caused by failure to follow the operating instructions in the Kodak digital cameras and accessories Users Guides. This warranty does not apply when failure is due to shipping damage, 62
accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments, failure to follow Kodaks operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty. Kodak makes no other express or implied warranty for this product. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date. The option of replacement is Kodaks only obligation. Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of this product, regardless of the cause. Liability for any special, consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services, or claims of your customers for such damages resulting from the purchase, use or failure of the product), regardless of cause or for breach of any written or implied warranty is expressly disclaimed and excluded herefrom.

Your rights

Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.

Regulatory information

FCC compliance and advisory
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation.

Overview

1 Power button/light

8 Print layout button

2 Camera connector (for Kodak EasyShare camera 9 Transfer button/light or ImageLink print system compatible camera) 10 Pull-out handle 3 Cartridge status indicator light 4 (4-way button) 5 Print button/light 6 Red-eye reduction button/light 7 Camera battery status light 11 Paper status indicator light 12 USB device connector 13 USB connector (to computer) 14 Power connector (DC-in) 15 Connector cover for optional battery
www.kodak.com/go/g600support

ENGLISH

Install the software
IMPORTANT: Before connecting any cables, install the software that was included with your printer. Follow the on-screen instructions.
After installing the software, return to this Getting Started Guide.
www.kodak.com/go/easysharecenter

Load cartridge and paper

Use only Kodak color cartridge & paper kits with symbol:
Remove ribbon slack. Insert cartridge.
Glossy side up. Do not fill above fill line (maximum 30 sheets).

Fan paper

Connect power and camera insert
Your AC power adapter may not require assembly Custom camera insert included with your camera

Dock camera and print

Note: To avoid cropping, use your cameras 3:2 Picture Size setting. (See your camera users guide.)
Select pictures to print: Press to locate a picture. Press to select print quantity. Repeat for each picture. 5 in. 12.7 cm
Allow space for printing.
Press Print. (Each picture makes 4 passes through the printer.)
Important: Do not pull out the print. The printer dock automatically ejects the finished print after the fourth pass.

Keep learning!

Congratulations! You have: set up your printer printed pictures Keep learning! Finish reading this book, so you can print and share your best pictures! Visit www.kodak.com/go/g600support and www.kodak.com/go/easysharecenter for: the extended users guide interactive troubleshooting and repairs interactive tutorials FAQs downloads accessories projects, printing tips product registration
Select pictures on camera and print*

Press the Share button.

to select copies, then press OK.
Repeat steps 2-4 to tag more pictures.

to locate a picture.

Highlight Print, then press OK.
Dock camera, then press Print. Selected pictures are printed.
* For Kodak EasyShare cameras only. For other brands of ImageLink system compatible cameras, see your camera users guide.
Take the printer dock with you

Slide tray into grooves.

Optional battery installation www.kodak.com/go/accessories
Battery charges when printer dock is plugged in. Blinking green = Battery charging Steady green = Charging complete
Crop pictures before printing*
Press the Review button, then press to locate a picture. Press the Menu button, highlight Crop, then press OK. Press the Telephoto/Wide (T/W) buttons (on the camera) to size the crop box. Press to move the crop box, then press OK. Follow the screen prompts. Note: The original picture is saved.
Transfer pictures, print from a computer
Remember to load software.
Transfer pictures to your computer.
Print using EasyShare software or other application.
Print from a compatible USB device

USB flash drive:

You must dock your camera to review and print pictures from a USB flash drive. To print, see page 5.
PictBridge compatible device: To print, see your device users guide.
Transfer pictures to a USB flash drive
Copy one or all the pictures from your camera to a USB flash drive.
Press the Transfer button. Follow the screen prompts.

Charge a camera battery

Dock your camera to print, transfer pictures to the computer, and charge the camera battery. This printer dock is ImageLink print system compatible. You can dock EasyShare cameras and other brands of ImageLink system compatible digital devices.
Attach a custom camera insert to the printer dock. Load a Kodak Ni-MH rechargeable digital camera battery (KAA2HR), or a Kodak Li-Ion rechargeable battery into the camera. Place the camera on the printer dock. Push down to seat the connector. Keep the camera strap clear of the paper path at the front and back of the printer dock. The camera is now powered by the printer dock instead of the camera battery. Charge for 3 hours, or until the green charging light stops blinking. Leave the camera docked to keep camera batteries charged.

Note: Not all cameras are compatible for charging on the G600 printer dock. See your camera users guide for dock compatibility. Your printer dock charges only Kodak Ni-MH and Li-Ion rechargeable batteries, and only when powered by the AC adapter. (The printer dock will not charge camera batteries when it is powered by its optional battery.)
Change the printed picture layout
Follow the steps (except for Press Print) to print from your digital camera or PictBridge compatible device. See page 5. Note: You can only change the picture layout if a device with a display screen is docked to your printer. Press the Print-layout button repeatedly to select a picture layout:

Picture Layout setting

1-up (full photo) 2-up 4-up (wallet size) 9-up (mini photo)
Number and size of prints per sheet
One 4 x 6 in. (102 x 152 mm) picture Up to two 2.1 x 3.3 in. (54 x 85 mm) pictures Up to four 2 x 3 in. (51 x 76 mm) pictures Up to nine 1.3 x 2 in. (34 x 51 mm) pictures
Press the Print button to begin printing. IMPORTANT: The printer dock automatically ejects the finished print after the fourth pass. Do not pull out a print.
Print multiple pictures on 1 sheet
Select pictures to print on camera (see page 6) with docked camera (see page 5). IMPORTANT: To fill up a sheet with duplicate copies, the number of copies you choose for the tagged pictures on your camera must match the number of prints in the picture layout you choose in Step 3.
Place the camera on the printer dock. If your camera is docked, a message appears on the camera screen indicating that tagged pictures are found. Press the Picture Layout button repeatedly to select: 2-up 4-up 9-up

to begin printing.

Reduce red eye in your prints
Your printer dock automatically detects and corrects red eye in your subjects before you print your pictures. Your printer dock defaults to red-eye reduction being always on, and the red-eye reduction button/light glows green. The Red-eye reduction button is disabled when printing from a computer. If printing from a computer (see page 10), make sure Kodak EasyShare software is installed on the computer. Your printer dock may apply red-eye reduction to an area such as a sunburn, which darkens the area in your print. Turn off red-eye reduction. To turn red-eye reduction off, press the Red-eye-reduction button. To change the red-eye reduction default to off, press and hold the Red-eye-reduction button for 5 seconds. The Red-eye reduction light blinks, then turns off.
Red-eye reduction button/light

6Appendix

Important Safety Instructions

CAUTION:

Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures. Kodak AC adapters and battery chargers are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support. When removing the battery, allow it to cool; it may be hot. Read and follow all warnings and instructions supplied by the battery manufacturer. Use only batteries approved for this product to avoid risk of explosion. Keep batteries out of the reach of children. Do not allow batteries to touch metal objects, including coins. Otherwise, a battery may short circuit, discharge energy, become hot, or leak. Do not disassemble, install backward, or expose batteries to liquid, moisture, fire, or extreme temperature. Remove the battery when the product is stored for an extended period of time. In the unlikely event that battery fluid leaks inside the product, contact Kodak customer support. In the unlikely event that battery fluid leaks onto your skin, wash immediately with water and contact your local health provider. For additional health-related information, contact your local Kodak customer support. Dispose of batteries according to local and national regulations. Do not charge non-rechargeable batteries. For more information on batteries, see http://www.kodak.com/go/batterytypes Service agreements may be available in your country. Contact a dealer of Kodak products for more information. Limited warranty Kodak warrants Kodak EasyShare digital cameras and accessories (excluding batteries) to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.

Appendix

This limited warranty will be honored only within the geographical location that Kodak digital cameras and accessories were purchased. Kodak will REPAIR or REPLACE Kodak EasyShare digital cameras and accessories if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Such repair service will include all labor as well as any necessary adjustments and/or replacement parts. Such repair or replacement is the sole remedy under this warranty. If replacement parts are used in making repairs, these parts may be remanufactured, or may contain remanufactured materials. If it is necessary to replace the entire product, it may be replaced with a remanufactured product. Request for Warranty service will not be accepted without proof of date of purchase, such as a copy of the original dated Kodak EasyShare digital camera or accessory sales receipt. (Always keep the original for your records.) This warranty does not apply to the battery(s) used in digital cameras or accessories. This warranty does not cover circumstances beyond Kodaks control, nor problems caused by failure to follow the operating instructions in the Kodak EasyShare digital cameras and accessories Users Guides. This warranty does not apply when failure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments, failure to follow Kodaks operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty. Kodak makes no other express or implied warranty for this product. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date. The option of replacement is Kodaks only obligation. Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of this product, regardless of the cause. Liability for any special, consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services, or claims of your customers for such damages resulting from the purchase, use or failure of the product), regardless of cause or for breach of any written or implied warranty is expressly disclaimed and excluded herefrom. Your rights Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction.

Outside the United States and Canada In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act. FCC compliance and advisory Kodak EasyShare G600 printer dock This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation. Australian C-Tick
Canadian DOC statement DOC Class B ComplianceThis Class B digital apparatus complies with Canadian ICES-003. Observation des normes-Class BCet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.
Waste Electrical and Electronic Equipment labeling
In the European Union, do not discard this product as unsorted municipal waste. Contact your local authorities or go to www.kodak.com/go/recycle for recycling program information.

VCCI Class B ITE

English translation: This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.

Korean Class B ITE

English translation: As this equipment has obtained EMC registration for household use, it can be used in any area including residential areas.
Eastman Kodak Company Rochester, New York 14650 Eastman Kodak Company, 2006 Kodak, EasyShare, ImageLink, and XtraLife are trademarks of Eastman Kodak Company. 4J4886_en