Copyright 2000-2002 Nokia. All rights reserved.

3 Introduction

Tip: The key is on the bottom row of the keyboard. The phone is designed for making and answering calls quickly. The communicator looks and operates like other Nokia wireless phones, except the earpiece and microphone are at the rear of the device. The phone is switched on and off by pressing the button on the cover. WARNING: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

Getting help

Online Help
The communicator has a help function, which you can access from any application or view. To view help, press the key on the communicator interface keyboard. You are shown a page of information relevant to the task you are doing. You can also search the help topics for specific subjects and keywords.
About the guides in the sales package
The Nokia communicator sales package contains the following guides either in print or as PDF files. To help you begin to use your communicator, turn to the Getting Started Guide supplied in your sales package. It explains the start-up procedure and gives basic information on how to use the various applications.
This users guide explains in more detail how the Nokia 9210i Communicator operates. General information identifies the various parts of the communicator and their functions, as well as the common features of the communicator. The rest of this users guide deals with the communicator applications and the phone. There is a short glossary of Internet and wireless terms and abbreviations at the back of the users guide. The PC Suite Guide explains the functionality of PC Suite for the Nokia 9210i Communicator. With PC Suite you can move, copy, synchronise, back up, and restore data between your communicator and a compatible PC. The Software on CD-ROM Guide explains in detail the functionality of the applications found on the CD-ROM that you can install on your communicator. The Add-on Applications Guide gives a brief introduction of other software available for the Nokia 9210i Communicator. This guide is only available in a printed version. The Settings Checklist helps you to connect your Nokia 9210i Communicator with different kinds of wireless services. The PC Suite Guide and the Software on CD-ROM Guide are both on the CD-ROM under the section Using the Nokia 9210i Communicator. In this users guide and the Getting Started Guide, the names of the commands on the display are in bold and the settings and options are in italics. Note: If you are switching from the Nokia 9000 Communicator, the Nokia 9000i Communicator, the Nokia 9110 Communicator, or the Nokia 9110i Communicator to the Nokia 9210i Communicator, see To transfer data from other devices on page 36 and in the PC Suite Guide on the CDROM.

Tip: Replace all is available only if you have selected Yes in the Replace all dialog.
Tip: You can select individual words to spell check. Otherwise the whole text is searched and spell checked.

32 General information

To print
You can print various items, such as documents, pictures, faxes, mails, and short messages. Refer to the users guide of the printer for detailed safety instructions on the printing device. To view or modify the page setup, press the Menu key and select File > Printing > Page setup To preview the document before printing it, press the Menu key and select File > Printing > Print preview To print a document or a file, 1 Press the Menu key and select File > Printing > Print. A note appears, showing the print range, connection type, and printer used. 2 Press Print. A dialog opens. To change the printing options, press Options. 3 To preview what you are about to print, press Print preview. A dialog opens. To define page setup, press Page setup.

Figure 11

33 General information
Tip: The shortcut to open the log is Shift+Ctrl+L. Tip: To change the categories Date and time and Duration to Subject and Status, press < and > on the Arrows key. When printing via infrared, make sure that the infrared port of the communicator faces the infrared port of the printer. Keep the infrared connection clear. If the connection is obstructed for too long, for example, if something is moved between the infrared sensors or the communicator is moved, printing is interrupted. For details on infrared connection, see page 35.
Log contains information about the communication history of your communicator. The log shows all, or certain types of communication events in chronological order. With log files you can monitor your communications, use the information to create or complete contact cards, or reply directly to the sender in the log.

Figure 12

To access the log
You can access the log from the Menu of several applications. Press the Menu key and select Tools > Log.
To make use of an individual communication event
1 Choose a log event and press Use. The command buttons change.

34 General information

Tip: A communication type can have one of the following delivery statuses: pending, delivered, failed, sent, not sent, and scheduled. 2 You can now do the following: send a fax or short message to the contact, call the contact, or add the contact to your Contacts directory. Check the command buttons for available options.
To view only certain communication types
1 Press Filter by type to choose a communication type you want to view. Press Filter by direction to choose whether you want to view communications originated by you or by the remote party. 2 Select from the options. 3 Press OK.

Figure To end a call, select the call you want to end with the Arrows key and press End call.

To make conference calls

The conference call is a network service. Contact your network operator to check if this service is available. In a conference call, you and up to five persons can hear each other simultaneously. The display shows a conference call as a single call. 1 Make a call.
2 Once the called person has answered, make a call to a second person by pressing New call. The first call is put on hold. 3 Wait until the second person answers the call. 4 To place both persons into a conference call, press Conference call. The display shows a single conference call. Press Conference commands to list the two participants of the conference call. 5 To include another person, press New call. The conference call is put on hold. When the person answers the call, press Conference call. This new person is included in the conference call. 6 To include further persons, repeat step 5. Tip: You can close the cover and continue the call via the cover phone after you have included all participants in the conference call. Figure 20
To remove a conference call participant
1 Press Conference commands. 2 Select the caller from the list of participants and press Drop. See Figure 20.
To talk privately with one of the conference call participants
1 Press Conference commands.

76 Telephone

2 Select a participant from the list and press Private call. The call is now split into two: the conference call is on hold and the one-to-one call is active. 3 Once you have finished the private conversation, you can return to the conference call by pressing Conference call. Tip: To view log files of all calls, press the Menu key and select Tools > Log. The General log shows all calls, both incoming and outgoing, voice and data.

To transfer calls

Call transfer is a network service where you connect two calls together and disconnect yourself from both calls. Contact your network operator to check if this service is available. When you have one call on hold, and another call active or an outgoing call alerting, press the Menu key and select Call > Transfer to connect the calls together. Note: You may be charged for some of the cost of the transferred call; contact your network operator for details. Note: You can only transfer voice calls. Fax, data, or conference calls cannot be transferred.

To answer a waiting call

To know that you have a call waiting, and to be able to answer it, you must first subscribe to the call waiting network service. Call waiting is selected in network services. For more information, see page 85. 1 When you receive a new call while you already have an active call, you hear a sound and see a note informing you of a new incoming call. 2 Press Answer. The active call is put on hold.

A dual tone multi-frequency tone system is used by all touch-tone telephones. DTMF assigns a specific frequency, or tone, to each key so that it can easily be identified by a microprocessor. DTMF tones allow you to communicate with voice mailboxes, computerised telephony systems, etc. To send DTMF tones during a call, you have two methods: Type the digits with the communicator keyboard. No menu or command button selection is needed before starting to type the digits. Each keystroke generates a DTMF tone which is transmitted while the call is active. Alternatively, 1 Press Send DTMF. The DTMF sequences you have stored in the contact card of the person you are talking with are shown. For information on how to store DTMF sequences, see page 101. 2 Select a DTMF sequence. You can edit the sequence. If there are no stored sequences, you can type a new DTMF sequence into the input field. 3 Press Send tone. Note: You can send DTMF tones during a conference call by typing the digits with the communicator keyboard, but you cannot access stored DTMF sequences. Tip: Besides the numbers 0 - 9, you can also use the characters p, w, *, and # when sending DTMF tones. For information on these characters, see To store DTMF tones on page 101.

Telephone Settings

In the Telephone main view, press the Menu key and select Settings to select one of the following settings.
To send DTMF tones during a call

78 Telephone

Profile settings
The profiles are used for grouping the settings of different operating environments of the communicator. In the settings you can modify the profile features. One profile is always in use. To change the profile in use, press the Menu key. Use the Arrows key to select the Profiles icon at the right-hand end of the menu bar and a new profile from the menu list.

Figure 21

3URILOHV LFRQ
To select and modify a profile, press the Menu key and select Settings > Profiles. The profiles provided with your communicator are: General - The default profile of the communicator. Silent - You can set this profile on when you want all the alert tones to remain silent (except Clock and Calendar alarms - see Note on page 79). Meeting - You can specify how the communicator operates when you are in a meeting, such as setting the volume of the tones low. Outdoor - You can specify how the communicator operates when you are outdoors.
Pager - You can set this profile on when you want the communicator to act as a pager. The default settings are that there is no ringing tone and that you get an alert tone for received short messages. Flight - Sets the Flight profile on. For more information, see Flight profile on page 91. Note: If you have turned on the Clock alarm or an alarm for timed entry in Calendar, it remains on in all profiles, including Silent.

Tip: To delete the cookies, press the Menu key and select Tools > Delete cookies. Tip: To empty the cache immediately, press the Menu key and select Tools > Clear cache.
Cache, History, and Plugins view
These views display a list of information on cache memory, browser history and installed plugins. To view information about the cache memory used for temporary storage of the pages you visit, press the Menu key and select Information > Cache.

Advanced page

150 Internet
To view information about the sites you have visited, press the Menu key and select Information > History list. To view what add-on software for the WWW browser has been installed, press the Menu key and select Information > Plug-ins. Plug-ins can display documents that the WWW browser itself cannot show, such as multimedia clips. You can download plug-ins from the WWW.

Bookmarks

The Bookmarks view can be accessed by pressing Bookmarks in the main view of the WWW application. See Figure 61. The Bookmarks view lists links to WWW pages in related folders. You can organise, edit, and view these bookmarks. You can also search for them and then connect to the URL addresses directly. See Figure 63.

Figure 63

To open and close folders, press Open folder and Close folder. To edit the name or address of a bookmark, press Edit. To add a new bookmark, press New bookmark. To return to the main view, press Close view.
To add a new bookmark while browsing the WWW
You can add a Web page, or a frame or link on a Web page, as a bookmark to your Bookmarks list. 1 On an open Web page, press the Menu key and select Tools > Add bookmark. 2 Edit the name and address of the bookmark, if necessary. 3 Press OK.
To export the Bookmarks list
In the Bookmarks view, press the Menu key and select Bookmarks > Export as HTML. to export the current Bookmarks list as a HTML document. Note: When you export bookmarks as HTML, the folder structure is lost.
The WAP application can be used to access Internet services which are based on the Wireless Application Protocol (WAP). These services can contain news, weather reports, flight times, dictionaries, and so on.

To select recipients

There are two ways to select recipients to your fax, mail and short messages: Note: A fax can have only one recipient. 1 Press Recipient in the corresponding message editor. A dialog listing your contacts opens, see figure 70.

Figure 70

166 Messaging
Tip: You can select more than one contact at a time, see To select several items at once on page 26. 2 Search for a contact or contacts in the left frame and press Select. The right frame shows the contacts you have already selected; to remove a contact, select it and press Remove. 3 Press Done. You can also just type in the first letters or the whole name of the recipient into the header of the fax, mail or short message and check if the letters or name match an entry in your contacts database: 1 Type in the name of the recipient into the header of the message. 2 Press the Menu key and select Tools > Check names. 3 If the name you have entered matches to more than one name, or if the person has more than one GSM phone number, fax number or mail address, a selection list appears. Select the correct name, phone number, or address from the list and press Select. Checked recipients are moved to separate lines in the header of the message. Note that a fax can have only one recipient. 4 To add another recipient to a mail or short message, press Enter after a checked recipient or insert the semicolon ; as a separator. To delete a checked recipient, move the cursor to the end of the entry and press backspace.
Tip: In the case of mail, you need to select the contacts to the appropriate fields in the dialog by pressing To, Cc or Bcc.

To avoid low memory

You should regularly delete messages from Inbox and Sent folders and delete retrieved mail from the communicator memory to free up memory space.

167 Messaging

WARNING! If you do not use this method to delete mail messages from your communicator, the messages you delete from your communicator may also be permanently deleted from your remote mailbox the next time when you go online. To delete dowloaded mail messages from the communicator: 1 Press the Menu key in the main view of Messaging and select Tools > Message storage. A dialog with two pages opens. 2 On the Communicator page you can choose to delete all mail messages or messages older than a given time period. To delete selected messages, press Delete now. Messages are deleted from your communicators memory, but they are not deleted from your remote mailbox. On the Memory page, you can delete or move messages from the current store. To change the store in use, press Change. To move the message storage from communicators memory to a memory card or vice versa, press Move. To delete all the messages in the selected message storage, press Delete. WARNING: Deleting the message storage deletes permanently all messages and mailbox folders and restores all messaging settings to factory defaults. Note: If you create a new message store to a memory card and remove the card a new storage must then be created in the internal memory when new messages are received. This leads to a situation where you cannot move messages from one memory storage to another, since only one message store at a time can be in use. Tip: Use a PC mail client to move mail messages from your remote inbox to other folders for archiving. If you keep the number of messages in the remote inbox to a minimum, your communicator has more available memory and the mail connection is faster. Tip: See Mail attachments on page 182 to delete attachments from received mail messages.

Workbooks

Tip: To add a workbook to the Desk application, press the Menu key and select File > Add to Desk. To create a new workbook, press the Menu key and select File > New workbook. To open an existing workbook, press the Menu key and select File > Open. To save a workbook, press the Menu key in the worksheet view and select File > Save. To send a workbook as mail or via infrared, press the Menu key in the worksheet view and select File > Send.

Worksheets

To create a new worksheet in a workbook, press the Menu key and select Insert > New worksheet.
To enter data, select a cell with the Arrows key and start typing the data in the selected cell. To confirm what you have entered into a cell, press Enter, OK, or go to another cell with the Arrows key. To dismiss the action, press Esc or Cancel. You can also enter a formula to perform operations on worksheet data. Sheet application provides some predefined, or built-in, formulas, which are known as functions. To insert a function, press Insert function. A dialog opens. See Figure 78. The function categories you can choose from are as follows: All, Financial, Date and time, Mathematical, Statistical, Lookup, Text, Logical, and Information. Each category has a set of functions, which you can see from the list next to Function name. Select the function you want and press Close.

Figure 78

To enter data
Example: You might want to sum up figures in cells C2 to C4 in cell C5; select cell C5, press Point reference and select the cell range from C2 to C4. Press Enter or OK to confirm the action. The SUM will now appear in C5. In a formula, you can enter constant values or cell references. A cell reference tells Sheet where to look for the values or data you want to use in the formula. To enter a reference to a cell or cells in a formula: 1 Go to the cell you want to edit, and press Edit. 2 Move the cursor to the place where you want to insert a reference, and press Point reference. 3 Select the cells that contain the values you want to use. See To select cells on page 135. The focus remains in the cell you are editing. Press Enter or OK to confirm the action.

Figure 79

To select cells
There are two ways to select a cell or a range of cells in a worksheet: Example: To select column A, enter A:A. To select row 1, enter 1:1. To select columns B and C as well as rows 2 and 3, enter B2:C3 Press the Menu key and select Edit > Select. Then enter the selection range or choose a range from the list. Press and hold the Shift key, and increase the selection frame with the Arrows key. To select entire rows or columns, press and hold the Shift key, and select the desired row or column headings with the Arrows key.
The selection is cleared when you press the Arrows key or Tab key.

To insert cells

1 Select a number of cell(s) that you want to insert into the worksheet. 2 Press the Menu key and select Insert > Cells. A dialog opens. 3 Define whether you want the inserted cell or cells to appear above (Shift cells down) or left (Shift cells right) of the selected range. To insert an entire row(s) or column(s), select either Entire row or Entire column. 4 Press OK to accept the insertion and Cancel to dismiss it.

5 Select the cell or cells. Press the Menu key and select Format > Font. A dialog opens. Press Change to change the value of a list item. To see the effect of the changes you have made, press Preview. Press Done to save the changes you have made.
To change background colour
1 Select the cell or cells.

To align cell contents

2 Press the Menu key and select Format > Cell appearance > Background colour. A dialog opens. 3 Choose the colour.

To insert page breaks

1 Press the Menu key and select Insert > Page break. A dialog opens. 2 Define the following options: Break at column and Break at row. Note: Since the break is placed above and on the left side of the selected cell, you cannot insert a page break when the cell A1 is selected.

To name cells

Tip: To change viewer preferences, press the Menu key and select Tools > Settings. Set the following options on or off: Show gridlines, Show row headers, Show column headers, Automatic recalculation, Show zero values, and Show pagination lines. 1 Select the cell or cells. 2 Press the Menu key and select Insert > Name > Add. If the cell or cells already have a name, you can edit the name by selecting Edit. A dialog opens. 3 Enter the name.

To name worksheets

1 Press the Menu key and select Edit > Rename worksheet. A dialog opens. 2 Choose the worksheet from the list and name it.
To delete cells, columns, rows, page breaks, and worksheets
1 Select a cell within the area you want to delete. 2 Press the Menu key and select Edit > Delete. A dialog opens. 3 Choose from the list what you want to delete.
1 Press the Menu key and select View > Worksheets or Sheets/Charts. A list opens. 2 Choose a sheet or chart and press OK to open the sheet and Cancel to dismiss it. Note: You cannot change the order of the sheets. Tip: To view sheets in the Chartsheet view, press Sheets/ Charts.

Chartsheets

To create chartsheets
There can be seven different kinds of charts: Line, Column, Stacked column, Bar, Stacked bar,X/Y scatter, and Pie. 1 Select a range of cells on a worksheet. These will provide the data for your new chartsheet. 2 Press the Menu key and select Insert > New chart. A dialog opens. 3 Define the following: Chart name, Chart type, 3-D, Background colour, and Axis colour. 4 Press Close to create a new chartsheet and Esc to dismiss it.

To edit chartsheets

1 Press Select object. A dialog opens. 2 Choose an object from the following list for editing and press OK: Chart, Chart title, X-axis,Y-axis, X-axis title, Y-axis title, Legend, Major X-axis gridlines, Minor Xaxis gridlines, Major Y-axis gridlines, Minor Y-axis gridlines, and Series. The setting dialog for the selected object opens. See Figure 81 for an example of X-axis settings being edited. 3 To edit the object, press Change or press Enter. A dialog opens. Tip: You can also press the Tab key and Enter to select objects. Press Esc to cancel the selection.

To view the presenters notes
To view the presenters notes along with the slides, press the Menu key and select View > Notes view.

File manager

Tip: Use File manager together with a memory card to remove files and folders from the communicator memory and thus free memory. See To back up and restore data to and from a memory card on page 211. You can use File manager to manage the contents and properties of various folders. The main view has two frames: a folder tree on the left and a file list on the right.
Figure 83 You can toggle between the frames with the Tab key.
The folder tree can contain folders from two roots, the communicator and a memory card. Under the communicator root there is C:\Documents\ folder that contains four default folders: \Documents\Downloaded\, \Documents\Photo gallery\, \Documents\Templates\, and \Documents\Tones\. To show or hide subfolders in the folder list frame, press < and > on the Arrows key. The - and + signs in front of the folder icons indicate whether the subfolders are shown or hidden. Folders without either sign have no subfolders, and you can use the Arrows key to switch between the folder view and files view. Note: Multi-selection is not possible in the folder list frame. Tip: Avoid saving files to the root of the communicator; use folders instead.

The files view

The file list on the right shows all the files in the source or folder currently selected in the left frame. The title of the file list frame shows the path of the currently selected file. The file list frame also shows the application-related icon, name, and the last modification date of the file. The files are sorted in alphabetical order by default. Note: Hidden files are shown only if you press the Menu key and select View > Show all files. Tip: To change the sorting order or the value by which the files are sorted (name, date and time, type, and size), press the Menu key and select View > Sort by or Sorting order.
To view the contents of a folder
1 Choose a folder in the left folder tree frame and press Open.

The folder view

208 Office
A view of all the subfolders and files of the parent folder opens. See Figure 84.
Figure To view any possible subfolder, select it and press Open. 3 To view parent folders, press Esc. 4 Press Close folder to return to the main view. The title of the folder content view shows the path name and the number of files and subfolders in the folder, together with the total size of all the files in the folder. This view shows the name, last modification date and time, and the size of a particular file. The icon in front of the name indicates the type of file or subfolder.

To open a file

1 Select a file and press Open. The file will then be opened in the corresponding application. 2 To return to the main view, press Close folder. Note: You can open only one file at a time.

1 Select folders or files that you want to move and press Move in the main view of File manager. A list of folders opens, as shown in Figure 85. Tip: For multi-selection, see To select several items at once on page 26.
Figure Search for a target folder with the Arrows key. To hide or show the subfolders of a folder, press Collapse and Expand respectively. You can also navigate in the folder list with the Arrows key and +/ - keys. To create a new target folder, press New folder. 3 Press OK to confirm the move and Cancel to dismiss it.

To create new folders

1 In the main view of File manager select the folder in which you want create a new folder 2 Select File > New folder. 3 Name the new folder. 4 To confirm the changes, press OK. To dismiss the changes, press Cancel.
To move files and folders

210 Office

To rename files and folders
1 Select the file or folder in the main view of File manager. 2 Press the Menu key and select File > Rename. The cursor now appears at the beginning of the selected file or folder name. 3 Rename the file or folder. 4 To confirm the changes, press OK. To dismiss the changes, press Cancel.
To view the properties of files, folders, and drives
Tip: In the Properties dialog, you can also change a file into hidden or readonly state or a folder into read-only state. 1 Select the file, folder, or drive in the main view of File manager. 2 Press the Menu key and select File > Properties. A dialog opens, as shown in Figure 86.

Figure 86

To search for files and folders
Choose the folder or memory storage where you want the search to take place. Press the Menu key and select Tools > Find. A dialog opens. Enter in the field the string for which you want to search. Press Options to define the search in more detail. See Figure 87.
Tip: You can search according to time period, start and end time, and the file type.
Figure 87 Press Change to change the value of a list item. When ready, press Close. 5 Press Find to start the search. To interrupt the search, press Stop. 6 When the search is over, press Open to open the folder or file found. To start a new search, press New find. 7 To return to the main view, press Close.
To back up and restore data to and from a memory card
It is advisable to take backups of your communicator data regularly. IMPORTANT! Do NOT use this method to restore data you have backed up with Nokia 9210 Communicator to Nokia 9210i Communicator. Use PC Suite instead. Note: The Backup and Restore commands will copy all data. You cannot back up or restore an individual folder. The Backup and Restore commands are recursive; that is, they copy folders and all the contents within the

Figure 90 To move between the input field, output sheet, and function map, press the Tab key. The input field is never empty in the desktop calculator: it contains either the result of the previous calculation or a zero (0) if you have pressed backspace.

218 Extras

Note: For more detailed information about Calculator, see the Nokia 9210i Communicator help.

Control panel

In the Control panel you can view or modify the following: Security, Data call barring, Data call barring, Profiles, Data call barring, Certificate manager, Date and time, Install/Remove software, Internet access, Backup/Restore, About product, Memory, Regional settings, and Default folder Modifying these features affects the operation of your communicator across all the applications.
Figure 91 To open a program for editing, select it with the Arrows key and press Select.

Security

Here you can define the phone security level of your communicator.
IMPORTANT: The default lock code is 12345. For security reasons, it is imperative that you change the lock code. Keep the code secret and in a safe place, separate from the communicator. Note that no passcode system can guarantee absolute prevention of unauthorised access. The codes are shown as asterisks. If you are changing a code, you will be prompted for the current code and then the new code twice. PIN code request: If you set the PIN code request On, the communicator requests that you enter the code every time you turn on the phone. If you enter the PIN code incorrectly three times in succession, you will need a PUK code to unblock the SIM card. When the SIM card is blocked, you cannot send or receive any documents or calls except calls to preprogrammed emergency numbers. Otherwise, the communicator can be used normally. You need the PIN code to change this setting. Note: This setting cannot be changed, if the phone is switched off or if there is no valid SIM card inserted. Note: Some SIM cards do not allow you to turn the PIN code request off. Autolock period: Determines the security time-out period, after which the communicator will lock. The options are None/2 minutes/5 minutes/10 minutes. The last option allows you to define the number of minutes yourself. When the communicator is locked, you can make emergency calls to predefined numbers using the cover phone. You can also answer incoming calls and make emergency calls using the Telephone application. All other actions are blocked. The timer is reset by any input, data transfer, printing, and so on. You need the lock code to change this setting.

Fax modem

You can use the communicator as a fax modem with a compatible PC. Your communicator can be connected to a PC via serial cable or by using an infrared connection. Before your PC can recognise the communicator as a fax modem, you need to install a new modem configuration for your PC. Please refer to your operating system manual for more information. During the installation you may be asked to enter the path to the modem information file. The path on the sales package CDROM is: \ Software for PC \ Printer and Modem drivers. Advanced users can also find a list of supported AT commands from this path. Normally there is no need to use these commands.

To detect new topics

Note: Using the communicator as a fax modem requires that data calls are supported by the network operator and that this service is active in your SIM card.
To install fax modem driver using cable connection
1 Start Windows. 2 Insert the Nokia 9210i CD-ROM into the CD-ROM drive of the computer and locate the modem information file (mdmn9210i.INF). Alternatively, you can find the file on the www.forum.nokia.com Web site. 3 Double-click the Modems icon in the Windows Control Panel. A dialog opens. If no modem drivers have been installed on the computer before, continue from step 6. 4 Click the Add button. 5 In the field What type of modem do you want to install? select Other. Click Next 6 Select the option Dont detect my modem; I will select it from a list 7 Click Have disk. 8 Click Browse and locate the CD-ROM drive with the Nokia 9210i CD-ROM. 9 On the CD-ROM, locate a folder Software for PC/Modem drivers 10 In the Modem drivers folder, select Mdmn9210i.inf file and click Open or OK. 11 In the Install from disk dialog, Click OK. 12 In the Install New Modem dialog, select Nokia 9210 Communicator (Cable). If you are using High Speed connection (HSCSD), select a speed higher than 9600 bps and cable connection. Click Next. 13 Select the COM port where the serial cable is connected. Click Next. 14 Click Finish.
Tip: To use High Speed connection, your GSM operator must activate High Speed Data Services on your SIM card.
15 Remove the CD-ROM from the drive. 16 In your communicator, press the Extras application button, select Fax modem, and press Open. 17 In the Fax modem application, press Settings 18 On the Connection page of the Fax modem settings, define the following: Connection type: Cable Transfer rate: 19200 or higher. Make sure that this setting is the same both in your communicator and your PC. Data bits: 8 Stop bits: 1 Flow control: Software Press Done. Note: Transfer rate is the speed with which the data is transferred between your communicator and PC. The best transfer rate for normal GSM calls is 19200 or higher. For high speed calls, you should select 115200. Select the same rate in your PC application as well. 19 Your communicator is now ready to be used as a fax modem. Press Activate to activate the Fax modem.

262 IMPORTANT SAFETY INFORMATION
Parts of the phone are magnetic. Metallic materials may be attracted to the phone, and persons with a hearing aid should not hold the phone to the ear with the hearing aid. Always secure the phone in its holder, because metallic materials may be attracted by the earpiece. Do not place credit cards or other magnetic storage media near the phone, because information stored on them may be erased.

Electronic devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your communicator.
Pacemakers Pacemaker manufacturers recommend that a minimum separation
of 20 cm (6 inches) be maintained between a hand-held wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers: Should always keep the phone more than 20 cm (6 inches) from their pacemaker when the phone is switched on; Should not carry the phone in a breast pocket; Should use the ear opposite the pacemaker to minimise the potential for interference. If you have any reason to suspect that interference is taking place, switch off your communicator immediately.
Hearing aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider.
including communicators, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off the phone of your communicator in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Vehicles RF signals may affect improperly installed or inadequately shielded