Reviews & Opinions
Independent and trusted. Read before buy Samsung SGH-T809!

Samsung SGH-T809

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Samsung SGH-T809 Mobile Phone, size: 2.6 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Samsung SGH-T809Samsung SGH T809 Cellular phone - Not specified - GSM - Black

Samsung - GSM - Unlocked

The SGH-t809 is the latest mobile innovation with Bluetooth wireless technology, megapixel camera, speakerphone and it's confined in a slim design that is sure to turn a few heads. Go wireless and connect your SGH-t809 without wires to your Bluetooth enabled computer and headset. Take and share pictures with family and friends with the built-in digital camera. Get even closer with the digital zoom. Play your favorite songs and store them on the phone or a memory card so you can take your tun... Read more

 

[ Report abuse or wrong photo | Share your Samsung SGH-T809 photo ]

Video review

Video Tour: Samsung SGH T809

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 3. Page 1 of 1. Average Rating:
donkarlosin 5:45pm on Monday, May 3rd, 2010 
There is no power indicator light (LED), that lets you know that the charger is plugged in properly. Most car chargers have a power LED light.
davidjmcc86 5:45am on Friday, April 16th, 2010 
Unsatisfied Product did not work as I anticipated it would. It shut off on me randomly and the camera did not function properly.
Deena 7:12pm on Sunday, March 14th, 2010 
The Samsung - SGH-T809 Cell Phone is a great bargain. It has all the perks of the more expensive phones and doesnt cost an arm and a leg.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Note: To reject an incoming call, press the Reject soft key or
2. End the call by closing the phone or pressing the key.
Note: You can answer a call while using the Phonebook or menu features. After ending the call, the phone returns to the function screen you were using.
All incoming, outgoing and missed calls are listed in the Call Records. You can also view Call time records. 1. In Idle mode, press the Menu soft key to access Menu mode. 2. Using the Navigation keys, scroll to the Call records icon. Press the Select soft key or the key to enter the menu.
Note: You can also access the call records of incoming, outgoing, and missed calls by pressing the key in Idle mode.
The following Call Record options are available:

All calls

This menu lets you view the 90 most recent calls you received, sent, and missed.
The number or name, if already stored in your Phonebook, displays with the number of occurrences of each number.
Section 3: Call Functions 25
Note: at any time while you are in Call Records, you may use the Left or Right Navigation key to scroll between All calls, Missed calls, Incoming calls, and Outgoing calls.

Missed calls

This menu lets you view the 30 most recent calls you received, but did not answer. The number and name, if already stored in your Phonebook, displays with the number of occurrences of each number. Viewing Missed Calls When you are unable to answer a call for any reason, you can find out who is calling you, if this service is available, so that you can call the person back. The number of calls you have missed displays on the idle screen immediately after a call is missed. To view a missed call immediately: 1. If the phone is closed, slide the phone open. 2. Press the View soft key. The number corresponding to the most recent missed call displays, if available. 3. To scroll through the missed calls, press the Up or Down Navigation key.
4. To call the number displayed, press the
5. Press the Options soft key for the following options:
Details: Displays details of the number including name, number, and dates and times of calls.
Call back: Places a call back to the number. Store to phonebook: Stores the number in your phonebook. Send message: Allows you to send a text message, picture message, or voice notes to the number. Delete: Allows you to delete the number or delete all call records.
You can press the Call feature.
key at any time to exit the Missed

Incoming calls

This menu lets you view the 30 most recent calls you received. The number and name, if already stored in your Phonebook, displays with the number of occurrences of each number.

Outgoing calls

1. Call the first participant in the normal way. 2. Call the second participant in the normal way. The first call is automatically put on hold.
3. To join the first participant to the multi-party call, press the Options soft key or the key and select Join. Press the Select soft key or the key. 4. To add a new person to the multi-party call, call the new person in the normal way and then press the Options soft key or the key. Select the Join option and press the Select soft key or the key. You can add incoming callers by answering the call and pressing the Options soft key or the key, and selecting Join. Repeat as required. Having a Private Conversation With One Participant 1. Press the Options soft key or the key and choose the Split option. Press the Select soft key or the key. The list of call participants appears. 2. Highlight a person you wish to talk privately with by pressing the Up or Down Navigation key, and press the Select soft key or the key. Now you can talk only to that person. The other participants can continue to converse with each other. 3. To return to the multi-party call, press the Options soft key or the key and select Join. Press the Select soft key or the key. All of the multi-party call participants can now hear each other. Dropping One Participant 1. Press the Options soft key or the key and choose the Split option. Press the Select soft key or the key.
Section 3: Call Functions 35
The list of call participants appears. 2. Highlight the person you want to keep. Press the Options soft key and highlight End held multiparty. Press the Select soft key or the key. The call with the participant on hold will end, but you can continue to talk to the other participants. 3. When you want to end the multi-party call, close the phone or press the key.

Section 3 36

Section 4: Menu Navigation

Section 4

Menu Navigation Menu Outline
This section explains the menu navigation for your phone. It also includes an outline of all the available menus associated with your phone.

Menu Navigation

You can tailor the phones range of functions to your needs using menus and sub-menus. Menus and submenus can be accessed by scrolling using the Navigation keys or by using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu mode. 2. Scroll using the Navigation keys to reach a main menu, Settings for example. Press the Select soft key or the key to enter the menu. 3. If the menu contains sub-menus, Security for example, you can access them by pressing the Select soft key or the key after the sub-menu has been highlighted. If the menu that you have selected contains further options, repeat this step. 4. To scroll through the menus, press the Up or Down Navigation keys. 5. To confirm the chosen setting, press the Select soft key, or the key. 6. To return to the previous menu level, press the Back soft key, or the key. 7. To exit the menu without changing the settings, press the key.

9.4.2 9.4.3 9.4.4 9.4.5 9.4.6 9.4.7 9.5.1 9.5.2 9.5.3 9.5.4 9.5.5 9.6.1 9.6.2 9.6.3 9.6.4 9.6.5 9.6.6 9.6.7 9.7.1 9.7.2 9.7.3 9.7.4 9.7.5 9.7.6 9.7.7 9.8.1 9.8.2 9.8.3 9.8.4 9.8.5 9.8.6
Keypad tone Message tone Power on/off Slide tone Silent mode Extra tones Call forwarding Call barring* Call waiting Network selection Caller ID Turn Bluetooth On/Off My devices My visibility My phone name Security modes Features Help PIN check Change PIN Phone lock Change password Privacy FDN mode Change PIN2 Shared memory Messages File manager Calendar Phonebook Games

9.5 Network services

9.6 Bluetooth

9.7 Security

9.8 Memory status

9.9 Reset settings

* Shows only if supported by your SIM card. Section 4 44

Section 5: Entering Text

Changing the Text Input Mode Using ABC Mode Using T9 Mode Using Number Mode Section 5 Using Symbol Mode
This section outlines how to select the desired text input mode when entering characters into your phone. This section also describes how to use the T9 predictive text entry system to reduce the number of key strokes associated with entering text.
Changing the Text Input Mode
When using your phone, you will often need to enter text, such as when storing a name in your Phonebook, creating your personal greeting or scheduling events on your calendar. You can enter alphanumeric characters by using your phones keypad. Your phone has the following text input modes:
ABC mode: this mode allows you to enter letters by pressing
the key labeled with the letter you want. How many times you press the key determines which letter or number appears.

Section 5

T9 mode: this mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more than one letter; for example, pressing can enter J, K, or L. However, the T9 mode automatically compares the series of keystrokes you make with an internal linguistic dictionary to determine the most likely word, thus requiring far fewer keystrokes than the traditional ABC mode.
Number mode: this mode allows you to enter numbers. Symbol mode: this mode allows you to enter symbols, such as

punctuation marks.

When you are in a field that allows characters to be entered, you will notice the text input mode indicator on the display.
Example: Writing a text message.

Using Number Mode

To enter periods, hyphens, or apostrophes, press the
T9 mode applies grammar rules to ensure that correct punctuation is used.
To shift case in T9 mode, use the
key. There are 3 cases: Initial capital, Capital lock, and Lower case. key. Press and hold the key to
You can move the cursor by using the Navigation keys. To delete
letters, press the clear the display.
Number mode enables you to enter numbers into a text message. Press the keys corresponding to the digits you want to enter.

Using Symbol Mode

Symbol mode enables you to insert symbols and punctuation marks into text. 1. To select a symbol, press the corresponding number key. 2. To display more symbols, press the Up or Down Navigation key. 3. To clear the symbol(s), press the key. When the input field is empty, this key returns the display to the previous mode. 4. To insert the symbol(s) into your message, press the OK soft key or the key.
Section 6: Understanding Your Phonebook
Storing a Number in the SIM Card Storing a Number in the Phones Memory Finding a Phonebook Entry Dialing a Number from Phonebook Speed Dialing Editing a Caller Group Dialing a Number from SIM Card Copying all SIM Phonebook Entries Deleting all of the Phonebook Entries My Name Card Finding My Own Phone Number FDN List Management Section 6
This section allows you to manage your contacts by storing their name and number in your Phonebook. Phonebook entries can be sorted by name, entry, or group.
Storing a Number in the SIM Card
1. At the Idle screen, press the Phonebook soft key. 2. Scroll to Add new contact by pressing the Up or Down Navigation key and press the Select soft key or the key. 3. Highlight SIM card and press the Select soft key or the key.
Note: You can set the Default saving option to SIM card, Phone memory or Ask on saving in the Management menu. So if you always want to save your new contacts to your phone, for example, this step of the procedure will be eliminated in the future. See "Default saving" on page 65 for more information.
4. Enter a name in the Name text box. Tab to the next text box by pressing the Down key. For further details about how to enter characters, see "Using ABC Mode" on page 47.

Section 6

5. Enter a number you want to store and press the Save soft key or the key. The number is saved in your SIM card. After storing, the phone displays the Phonebook entry you just created. 6. To use the entry options before saving the number, press the Options soft key. The following options are available:
Save: saves the number in the SIM card. Language select: allows you to select between English, French, or Spanish.
Storing a Number in the Phones Memory
Cancel: cancels the Add New Contact screen and returns you to the previous menu.

7. To use the entry options after saving the number, press the Options soft key. The following options are available:
Edit: allows you to edit the name and number fields in the entry. Send message: allows you to send a message to the selected number. You may choose between Text messages, Picture messages, or Voice notes. Call: allows you to call the number. Assign speed dial: allows you to assign a speed dial key number to the selected Phonebook entry. Copy to: allows you to copy the number to your Phone, SIM card or FDN. Send name card via: allows you to send your name card via Text message, Picture message, or Bluetooth. Delete: allows you to delete the name and number from Phonebook. You are asked to confirm that you wish to delete the name and number by pressing the Yes soft key. To cancel, press the No soft key.
8. To return to the Idle screen, press the
If you want to store a number in your phones memory, you have 2 different options. You can save it to your SIM card and then copy it to your phone, or you can change your Default Saving option to Phone so that all your new contacts will be saved to Phone. See "Default saving" on page 65 for information on how to change this setting.
Section 6: Understanding Your Phonebook 55
Note: When you copy a phone number from your SIM card to your phone, the number will appear twice in your Contact list.
1. At the Idle screen, press the Phonebook soft key. 2. Scroll to Add new contact by pressing the Up or Down Navigation key and press the Select soft key or the key. 3. Highlight Phone and press the Select soft key or the key.
4. Enter a first name in the Name text box. Tab to the next text box by pressing the Down key.
For further details about how to enter characters, see "Using ABC Mode" on page 47. 5. Enter a last name in the text box. 6. Highlight a number Type by pressing the Up or Down Navigation key, then enter a number in the text box. The following types are available:
Mobile: assigns the number entered to the Mobile entry. Home: assigns the number entered to the Home entry. Office: assigns the number entered to the Office entry. Fax: assigns the number entered to the Fax entry.
Finding a Phonebook Entry
Other: allows you to enter more detailed information for the entry.
7. Continue to scroll down using the Down Navigation key to enter Email address, Picture ID, Ringtone, Group, and Notes if desired. 8. Press the Save soft key or press the Options soft key and highlight the Save option and press the Select soft key or the key. The number is saved to your phone and the new contact information is displayed. 9. To return to the Idle screen, press the key.
You can store phone numbers and their corresponding names in your SIM card and phones memories. They are physically separate but are used as a single entity, called Phonebook. Depending on your particular SIM card, the maximum number of phone numbers the SIM card can store may differ. 1. When the idle screen displays, press the Phonebook soft key. 2. Highlight Contact list and press the Select soft key or the key. 3. Enter the first few letters of the name in the text box. The Phonebook entries are listed, starting with the first entry matching your input. 4. If needed, press the Up or Down Navigation key until the entry you want is highlighted.

You can check how many names and numbers are stored in the Phonebook, in both SIM card and the phone memory. You can also see the capacity of both memories. 1. When the idle screen displays, press the Phonebook soft key.
2. Highlight Management and press the Select soft key or the key. 3. Select the Memory status option by pressing the Up or Down Navigation key and press the Select soft key or the key. 4. When you are finished, press the soft key. key or the Back

Section 7: Messages

Voice Notes Text Messages Picture Messages Inbox Sentbox Outbox Drafts Templates Voice mail Delete All Settings Broadcast Messages Instant Messaging Memory Status
This section describes how to send or receive different types of messages. It also includes the features and functionality associated with messaging.

Section 7

Types of Messages
Your phone provides the following message types:
Voice Notes Text Messages Picture Messages Voice Mail Messages Broadcast Messages (SIM Dependent) Instant Messaging

Voice Notes

In this menu, you can record a voice note of up to one minute long and then immediately send it by a Picture Messaging message. When you access this menu, a timer appears on the screen. 1. In Idle mode, press the Menu soft key to access Menu mode. 2. Using the Navigation keys, scroll to the Voice notes icon. Press the Select soft key or the key to enter the menu. 3. Press the Record soft key to start recording. 4. Record a memo by speaking into the microphone. The display shows the elapsed time and the remaining time at one time.
5. When you are finished, press the Stop soft key. Or, when the recording time is expired, the display switches to the next screen. 6. Press the Options soft key for the following options:
Send: allows you to send the Voice note. Play: plays back your Voice note. Re-record: discards the Voice note and enables you to record another one. Set default destination: allows you to remove or edit the default destination. Save: saves the Voice note and continues to the Send option.
7. To send the Voice note, select the Send option in the Options menu and press the Select soft key or the key. 8. Highlight one the following options:
Recent log: allows you to select a number or an address from the 20 last destinations you entered for sending the last messages. Phonebook: allows you to enter the phone number you want from your phonebook. Use the key to check the selected entries. Phone number: allows you to enter a phone number. Email address: allows you to enter an email address to send the voice note to. My Album: allows you to send the voice note to My Album. My Journal: allows you to send the voice note to My Journal.

9. Press the Select soft key or the
10. Select where you would like to send your voice note then and it will be entered in the Send menu in a To field. 11. To add another destination, select Empty and press the Options soft key.

Section 7: Messages 71

Note: When entering multiple destinations, you can also choose Group, Change recipient, and Back options in addition to the other send options.
12. Repeat from step 8. You can enter up to 20 destinations. 13. When you have finished entering the destinations, press the Options soft key, highlight the Send option and press the Select soft key or the key. Your phone sends the message. After sending, the message is saved in the Sentbox.

Text Messages

Short Message Service (SMS) allows you to send and receive short text messages to and from other mobile phones. In addition, your phone supports the Enhanced Messaging Service (EMS), which enables you to include simple pictures, melodies, and animated images in your messages. To use this feature, you must subscribe to your service providers message service. When the Message icon ( ) appears, you have received new text messages. When the memory is full, the message icon will flash on your phone and you cannot receive any new messages. You must delete a message before you can receive additional messages. Use the Delete option in each message box to delete obsolete messages.

Create new

In this menu, you can write and send a text message.
Creating a Simple Text Message 1. In Idle mode, press the Menu soft key to access Menu mode. 2. Using the Navigation keys, scroll to the Messages icon. Press the Select soft key or the key to enter the menu. 3. Highlight the Create new option and press the Select soft key or the key. 4. Highlight the Text message option and press the Select soft key or the key. 5. Create your message.
Notes: For further details about entering characters, see "Section 5: Entering Text" on page 45. You can enter up to 160 standard Alphabet characters per page in your message. The message can be up to 12 pages long for a total of 1920 characters.
6. When you finish entering your message, press the Options soft key. The following options are available:
Send: allows you to send the message. Insert text via: allows you to insert Text template, Phonebook, or Favorite. The Text template allows you to apply one of the preset message templates to the text. Select one of the 10 items stored in the Text messages template menu. Phonebook allows you to add names and phone numbers to your message. Favorites allows you to add internet addresses to your message. Add content: allows you to add a picture, animation, or melody to your message.

USB settings

This menu allows you to set the USB settings you will need to plug your phone into a USB port on a PC. The following options are available:
Modem: when this option is selected, you can use the PC

Studio application to:

Synchronize contacts in your calendar. Transfer MP3 or image files from your PC directly to your

phones memory.

Use your phone as a modem in a wireless network.

Display Settings

Mass storage: select this option when you want to download
objects from a PC, such as MP3s or images, to your TransFlash memory card.

Extra settings

You can turn the automatic redialing or answering features on or off. 1. To turn a feature on, highlight the feature and press the key. A check mark displays in front of the option. 2. To turn a feature off, highlight the checked feature and press the key. The check mark no longer displays. The following options are available:
Auto redial: when this option is checked, the phone makes
up to ten attempts to redial a phone number after an unsuccessful call.
Note: The interval between call attempts varies.
Anykey answer: when this option is checked, you can
answer an incoming call by pressing any key, except the key or the Reject soft key. To reject the call, press the key or the Reject soft key. When this option is unchecked, you must press the key or Accept soft key to answer a call.
3. When you have finished changing your settings, press the Save soft key to save your settings. Otherwise press the Cancel soft key.
In this menu, you can change various settings for the display or backlight.
Section 8: Changing Your Settings 99

Wallpaper

This menu allows you to change the background image or the color of the text to be displayed in Idle mode. The following options are available:
Get more wallpaper: this option takes you to t-zones where
you can download wallpapers.
Default wallpapers: allows you to choose from a list of
wallpapers included with your phone.
My photos: allows you to choose a photo from My photos

folder.

My downloads: allows you to choose a photo from your
downloaded images folder.
To change the background image: 1. Scroll through the list by pressing the Navigation keys. 2. When the image you want highlights, press the Save soft key if selecting from Default wallpapers. Otherwise, press the Options soft key. Highlight the Save option and press the Select soft key or the key.

Main menu style

The following options are available:
Default: the default setting provided by the network is used. Hide number: your number does not display on the other

persons phone.

Send number: your number is sent each time you make a call.

About Bluetooth

Bluetooth is a short-range wireless communications technology capable of exchanging information over a distance of about 30 feet without requiring a physical connection. Unlike infrared, you don't need to line up the devices to beam information with Bluetooth. If the devices are within a range of one another, you can exchange
Section 8: Changing Your Settings 109
information between them, even if they are located in different rooms.
The following Bluetooth options are available:

Turn Bluetooth On/Off

This option allows you to turn Bluetooth On or Off. Make a selection and press the Select soft key or the key.

My devices

This option allows you to search for new Bluetooth devices. Highlight the Search new device option and press the Select soft key or the key. The phone will search for available devices.

My visibility

This option allows you to turn your visibility to On or Off. Make a selection and press the Select soft key or the key.

My phone name

This option shows the name given to your phone for Bluetooth purposes. You can edit the name if needed.

Security modes

This option allows you to set your security modes to On or Off. Make a selection and press the Select soft key or the key.

Features

Actually, the Bluetooth specification is a protocol that describes how the short-range wireless technology works, whereas individual profiles describe the services

Security Settings

supported by individual devices. Profiles reduce the chance that different devices will not work together. The following Service profiles are available:
Headset: The remote Bluetooth headset enables outgoing and

incoming calls.

Handsfree: The remote Bluetooth car kit enables outgoing and

measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency energy (RF). FDA has been a leading participant in the World Health Organization international Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues. FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.
Section 12: Health and Safety Information 169
What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not know that there is - it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna.

inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result.
Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to the aircraft's operation.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or legal action, or both.

Product Performance

Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal. If you're inside a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. If your phone is active, it periodically rechecks service availability or you can check it yourself by pressing any key. Anytime the Power Save feature is activated, a message displays on the screen. When a signal is found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned on, it receives and transmits radio frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This power can range from 0.006 watts to 0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should service your phone and accessories. Faulty service may void the warranty. There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service.
If your phone is equipped with an external antenna, hold the
phone with the antenna raised, fully-extended and over your shoulder.
Do not hold, bend or twist the phone's antenna, if applicable. Do not use the phone if the antenna is damaged. If your phone is equipped with an internal antenna, obstructing
the internal antenna could inhibit call performance.
Speak directly into the phone's receiver. Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power off and remove the battery. If it is inoperable, call Customer Care for service.

ancillary/peripheral equipment not furnished or approved by SAMSUNG; (e) defects or damage from improper testing, operation, maintenance, installation, or adjustment; (f) installation, maintenance, and service of Product, or (g) Product used or purchased outside the United States or Canada. This Limited Warranty covers batteries only if battery capacity falls below 80% of rated capacity or the battery leaks, and this Limited Warranty does not cover any battery if (i) the battery has been charged by a battery charger not specified or approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery are broken or show evidence of tampering, or (iii) the battery has been used in equipment other than the SAMSUNG phone for which it is specified. What are SAMSUNG's Obligations? During the applicable warranty period, SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to Purchaser, any defective component part of Product. To obtain service under this Limited Warranty, Purchaser must return Product to an authorized phone service facility in an adequate container for shipping, accompanied by Purchaser's sales receipt or comparable substitute proof of sale showing the date of purchase, the serial number of Product and the sellers' name and address. To obtain assistance on where to deliver the Product, call Samsung Customer Care at 1-888-987-4357. Upon receipt, SAMSUNG will promptly repair or replace the defective Product. SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts or components when repairing any Product or replace Product with a rebuilt, reconditioned or new Product. Repaired/ replaced leather cases, pouches and holsters will be
Section 13: Warranty Information 191
warranted for a period of ninety (90) days. All other repaired/replaced Product will be warranted for a period equal to the remainder of the original Limited Warranty on the original Product or for 90 days, whichever is longer. All replaced parts, components, boards and equipment shall become the property of SAMSUNG. If SAMSUNG determines that any Product is not covered by this Limited Warranty, Purchaser must pay all parts, shipping, and labor charges for the repair or return of such Product. WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO:

Sound Settings 103

Shortcuts 38 Silent mode 105 SIM card

installing 6

Soft Keys 29 Speakerphone 32 Speed Dial

Setting Up Entries 59

icons 17 switching on/off 10 Phone lock 112
Stopwatch 138 Storing a number
Phones Memory 55 SIM Card 54
Phone Settings 97 Phonebook
Searching for a Number 33

Switching on/off

phone 10
Phonebook Management 65 Picture Messages 75 PIN
change 112 check 111 Privacy 113

Symbol mode 46

T9 mode 46 Templates 88 Text input mode

changing 46

Push message

viewing in Inbox 84

Text Messages 72 Timer 138
Travel adapter 8 t-zones 156
Entering Text 157 Exiting 156 Navigating 156
Understanding Your Phone 13
Features of Your Phone 14 View of Your Phone 14
Understanding Your Phonebook 53
Finding a Phonebook Entry 57 Finding My Phone Number 64 Management 65

Voice Mail 11, 89

changing number 11
Voice Messages 70 Voice notes 70

Warranty Information 189

doc1

GSM TELEPHONE

SGH-T809

1. 2. 3. 4. 5. 6. 7.

CONTENTS

Specification Circuit Description Exploded Views and Parts List Electrical Parts List Block Diagrams PCB Diagrams Flow Chart of Troubleshooting
Samsung Electronics Co.,Ltd. November. 2005 This Service Manual is a property of Samsung Electronics Co.,Ltd. Any unauthorized use of Manual can be punished under applicable Printed in Korea. International and/or domestic law.
Code No.: GH68-08813A BASIC.
1-1. GSM General Specification
GSM850 Fr eq. Ba nd[MHz] Uplink/ Downli nk ARFCN r ange 824~849 869~864 128~251 GSM900 Phas e 1 890~915 935~960 1~124 EGSM 900 Phas e 2 880~915 925~960 0~124 & 975~1023 45MHz 270.833kbps 3.692us 576.9us 4.615ms 0.3GMSK 33dBm~5dBm 5pcl ~ 19pcl - 102dBm 8 35Km DCS1800 Phas e 1 1710~1785 1805~1880 512~885 PCS1900 1850~1910 1930~1990 512~810
Tx/ Rx s pacing Mod. Bit r ate / Bit Pe r iod Ti me Slot Per iod / Frame Peri od Modulat ion MS Power Power Class Sensit ivit y TDMA Mux Cell Radius
45MHz 270.833kbps 3.692us 576.9us 4.615ms 0.3GMSK 33dBm~5dBm 5pcl ~ 19pcl -102dBm 8 35Km
45MHz 270.833kbps 3.692us 576.9us 4.615ms 0.3GMSK 33dBm~5dBm 5pcl ~ 19pcl - 102dBm 8 35Km
95MHz 270.833kbps 3.692us 576.9us 4.615ms 0.3GMSK 30dBm~0dBm 0pcl ~ 15pcl - 100dBm 8 2Km
80MHz 270.833kbps 3.692us 576.9us 4.615ms 0.3GMSK 30dBm~0dBm 0pcl ~ 15pcl - 100dBm 8 2Km
SAMSUNG Proprietary-Contents may change without notice

1-2. GSM TX power class

TX Power control level
TX Power GSM850 control level
TX Power GSM900 control level
TX Power DCS1800 control level

PCS1900

313 dBm

283 dBm

293 dBm

263 dBm

273 dBm

243 dBm

253 dBm

223 dBm

233 dBm

203 dBm

213 dBm

183 dBm

193 dBm

163 dBm

173 dBm

143 dBm

153 dBm

124 dBm

133 dBm

104 dBm

115 dBm

95 dBm

64 dBm

75 dBm

44 dBm

55 dBm

25 dBm

05 dBm

2-1. SGH-T809 RF Circuit Description

2-1-1. RX PART

- FRONT END MODULE(ANTENNA SWITCH MODULE + RX SAW FILTER) (F101) It performs to switch Tx & Rx paths for GSM850, GSM900, DCS1800 and PCS1900 with logic controls below. - FEM Control Logic Table FESW1 Tx Mode (GSM850/900) Tx Mode (DCS1800/1900) Rx Mode (GSM900/850) Rx Mode (DCS1800) Rx Mode (PCS1900) H L L L L FESW2 L H L L L H FESW2
- VC-TCXO (TCX100) This module generates the 26MHz reference clock to drive the logic and RF systems. It is turned on when the supply voltage (+VCC_SYN_2V8) is applied. After buffering, the 26MHz reference clock is supplied to the other parts of the system through the transceiver pin CLKOUT. - Transceiver (U102) This chip is fully integrated GSM & GPRS quad-band transceiver with RF VCO, loop filters and most of the passive components required in it. It also fully integrated fractional N RF synthesizer with AFC control possibility, RF VCO with integrated supply regulator. Semi integrated reference oscillator with integrated supply regulator. RF Receiver front-end amplifies the E-GSM900(GSM850), DCS1800 and PCS1900 aerial signal, convert the chosen channel down to a low IF of 100kHz. In IF section, further amplifies the wanted channel, performs gain control to tune the output level to the desired value and rejects DC.

2-1-2. TX PART

The transmitter is fully differential using a direct up conversion architecture. It consists of a signal side band power up mixer. Gain is controlled by 6 dB via 3-wire serial bus programing. The fully integrated VCO and power mixer achieve LO suppression, quadrature phase error, quadrature amplitude balance and low noise floor specification. Output matching/balun components drive a standard 50 ohms single ended load.
2-2. Baseband Circuit description of SGH-T809

2-2-1. PCF50603 (U400)

Power Management Eight low-dropout regulators designed specifically for GSM applications power the terminal and help ensure optimal system performance and long battery life. A programmable boost converter provides support for 1.8V, 3.0V SIMs, while a self-resetting, electronically fused switch supplies power to external accessories. Ancillary support functions, such as RTC module and High Voltage Charge pump, Clock generator, aid in reducing both board area and system complexity. I2C BUS serial interface provides access to control and configuration registers. This interface gives a microprocessor full control of the PCF50603 and enables system designers to maximize both standby and talk times. Supervisory functions. including a reset generator, an input voltage monitor, and a temperature sensor, support reliable system design. These functions work together to ensure proper system behavior during start-up or in the event of a fault condition(low microprocessor voltage, insufficient battery energy, or excessive die temperature).

Pulse-Width Modulator The Backlight Brightness Modulator (BBM) contains a programmable Pulse-width modulator (PWM) to modulate the intensity of a series of LED's or to control a DC/DC converter that drives LCD backlight. This phone is using PWM control to modulate the LCD backlight brightness.
Clock Generator The Clock Generator (CG) generates all clocks for internal and external usage. The 32.768 kHz crystal oscillator provides an accurate low clock frequency for the PCF50603 and other circuitry.

2-2-2. LCD

T809 has just one 2.12" TFT LCD. 16-bit data lines(LD(0)~LD(15)) transfers data and commands to LCD. There are couple of control signals such as RS, LCD_MAIN_CS, L_WRB, etc. RS stands for "Register Select pin." When RS = 0, data can be written to the index register or status can be read, and when RS = 1, an instruction can be issued or data can be written to or read from RAM. Read or write operation is selected according to L_WRB signals. The data is received when the R/W bit is 0, and is transmitted when the R/W bit is 1. At the falling edge of LCD_MAIN_CS
input, serial data transfer is initiated. On the other hand, at the rising edge of LCD_MAIN_CS input, the data transfer is ceased.

2-2-3. Key

Key recognition part is consisted of 8 ports from PCF5213EL1. KEY_ROW(0:4) & KEY_COL(0:4) These signals performs with the matrix. Any input from the matrix informs the key status to key interface in the PCF5213EL1. Power on/off key is independent of the matrix. Therefore, 'power on/off' signal is directly connected with PCF50603 to turn PCF50603 on. Two 3.3V LDOs(U716, U823) enable Main and Sub Key LED on. Main and Sub Key LED are controlled by KEYLED_ON and SLIDER_KEY_ON signal respectively.
2-2-4. EMI ESD Filter (U500)
This system uses the EMI ESD filter (F500) to protect the device from noises from IF CONNECTOR part.
2-2-5. IF connetor (IFC500)
It has 20-pin. They are designed to allocate not only 'power and data lines'(VBAT, V_EXT_CHARGE, USB_D+, +VBUS, USB_D-, TXD1, RXD1, AUX_ON, EXT1, EXT2 and GND) but also Earphone lines(EAMMIC_P/N, EARSPK_R/L, EAR_SWITCH, EARSPK_COM and EAR_ADC). They connected to power supply IC, microprocessor, signal processor IC and Earphone.
2-2-6. Battery Charge Management
T809 has a complete constant-current/constant-voltage linear charger for single cell lithium-ion batteries inside. If Travel Adapter is connected, "V_EXT_CHARGE" begins to provide the charger IC (to battery) with power (current). When the charging operation is done, "END_OF_CHG" informs it to PCF5213EL1 to stop the operation. "CHG_ON" signal enables the charger IC to operate in adequate circumstances.

2-2-7. Audio - Part

T809 has several audio-outputs such as stereo speaker, receiver, earphone, etc. HFR P/N signals from CPU are connected to the receiver. MIC_CP/N are connected to the main MIC and MIC_CP2/N2 as well. SAPA1D2 is a Class-D amplifier for outputting sounds that are used by mobile phones including MP3 playback, melodies, voice output on speaker phone mode and so on. STG3699(U515) is an analog switch to connect SAP1D2 input port to main DSP or CODEC Chip.

2-2-8. Memory (UME307)

T809 has KBH10PD00M-D414 as a memory module. The KBH10PD00M-D414 is a Multi Chip Package Memory which combines 256Mbit Synchronous Burst Multi Bank NOR Flash Memory and 1Gbit OneNAND Flash and 256Mbit Synchronous Burst UtRAM. It has 16 bit data line, HD[0~15] which is connected to PCF5213 and CL8522S5(Multi-media chip), also has 24 bit address lines, HA[1~24]. There are 3 chip select signals, CS0n_FLASH, CS1n_RAM, and CS4n_NAND. In the writing process, WEn is fallen to low and it enables writing process to operate. During reading process, OEn is fallen to low and it enables reading process to operate. Each chip select signals in the PCF5213EL1 choose different types of memory.
2-2-9. PCF5213EL1 (UCP200)
The PCF5213EL1 is mainly composed of embeded DSP and ARM core. The DSP subsystem includes the Saturn DSP core with embedded RAM and ROM, and a set of peripherals. It has 24k16 bits PRAM, 104k16 bits, 32k16 XYRAM and 63k16 XYROM in the DSP. The ARM946E-S consists of an ARM9E-S processor core, 8 kbyte instruction cache and 8 kbyte data cache, tightly-coupled ITCM (Instruction Tightly Coupled Memory) and DTCM (Data Tightly Coupled Memory) memories, a memory protection unit, and an AMBA (Advanced Microcontroller Bus Architecture) AHB (Advanced High-performance Bus) bus interface with a write buffer. HD(0:15), data lines and HA(0:23), address lines are connected to KAP17SG00A(memory) and CL8522S5(Multi-media chip). It has 64 kbyte SC RAM (0.5 Mbit) and 32 kbyte SC program ROM for bootstrap loader in the ARM core.
HD(0:15), data lines and HA(0:23), address lines are connected to memory and CL8522S5 to communicate. ARM core and DSP core. OEn, WEn control the access of memory. KROW, and KCOL recognize the key string input status. It has J-TAG control pins (TDI/TDO/TCK) for ARM and DSP core. J-SEL signal controls different access to ARM and DSP core. ADC(Analog to Digital Convertor) receives the condition of temperature, battery type and battery voltage.
2-2-10. TCO-5871U (TCX100, 26MHz)
This system has the 26MHz TCXO, TCO-5871U from Toyocom. AFC controlling signal form PCF5213EL1 controls frequency from 26MHz X-tal. It generates the clock frequency. This clock is connected to PCF5213EL1 and UAA3587.

2-2-11. CL8522S5 (U303)

CL8522S5 provides rich video functions up to 30-frame display with minimized tasks in the handset main processor as well as hardware based real-time JPEG compression and decompression. CL8522S5 directly transmits and previews the RGB data to the LCD graphic memory by processing the sensor output data according to the handset's command. It can save the raw RGB data up to VGA resoultion into its image buffer and allows the host processor to download with scalable sized compressed data. It also provides I2S data bus to playback MP3 formatted data. It utilizes 16 bit data bus for communication with the main processor, including bus interface types.

3-1. Exploded View

QFR01 QMW02

QVO02 QVO09 QCR06

QAN06 QAN02 QCR10
QHI01 QKP01 QKP02 QLC01 QAU01 QMI01 QSH01 QMP02 QME01 QVK06

QCH04 QCA01 QCH10 QCW01

QMP01 QSP02 QVK01 QMO01
QSC11 QSC12 QCR17 QPC01 QIF01 QCR26

3-2. Parts List

Location No
QAN02 QAN06 QAU01 QBA00 QBA01 QCA01 QCH04 QCH10 QCR06 QCR10 QCR17 QCR26 QCW01 QFU01 QHI01 QKP01 QKP02 QLC01 QME01 QMI01 QMO01 QMP01 QMP02 QMW02 QPC01 QRF01 QSC11 QSC12 QSH01 QSP02 QVK01 QVK06 QVO02 QVO09 QRE01 QIF01 QCH05 QFL01 QFL02 QFR01

Description

INTENNA-SGHT809 MEC-TAPE ANTENNA RUBBER AUDIO-RECEIVER MEC-BATTERY COVER BATTERY-800MAH,BLK,ENG,M UNIT-CAMERA PMO-CAMERA UPPER MEC-CAMERA LOWER SCREW-MACHINE SCREW-MACHINE SCREW-MACHINE SCREW-MACHINE PCT-CAMERA WINDOW MEC-SLIDER UPPER MEC-HINGE(CAMERA) MEC-KEYPAD MAIN MEC-KEYPAD SUB MEA-LCD MODULE KIT(T809) UNIT-METAL DOME(SUB) MICROPHONE-ASSY MOTOR DC-SGHT809 PBA MAIN-SGHT809 PBA SUB-SGHT809 PCT-MAIN WINDOW MEA-SLIDE FPCB KIT PMO-RF COVER PMO-S/LOWER SCREW CAP R PMO-S/LOWER SCREW CAP L MEC-SHIELD CAN UNIT-SPK MIC MODULE UNIT-VOLUME KEY UNIT-KEYPAD FPCB(MAIN) PMO-KEY VOLUME NDC-VOLUME KEY COVER MEC-REAR COVER PMO-IF COVER V4 PMO-T FLASH COVER V3 MEC-FRONT SLIDER LOWER MEC-SLIDER LOWER MEC-FRONT COVER

Sec Code

GH42-00702A GH75-08483A 3009-001148 GH75-08553A GH43-02040A GH59-02465A GH72-24755A GH75-08107A 6001-001155 6001-001633 6001-001460 6001-001850 GH72-25223A GH75-07759A GH75-06936A GH75-07765A GH75-07764A GH97-05102A GH59-02384A GH30-00220A GH31-00196A GH92-02430A GH92-02471A GH72-25222A GH97-05104A GH72-25131A GH72-26494A GH72-26493A GH75-08463A GH59-02569A GH59-02385A GH59-02379A GH72-24204A GH71-05436A GH75-07763A GH72-26995A GH72-26991A GH75-07760A GH75-07761A GH75-07762A
IC-MEMORY CARD CONNECTOR-ADAPTOR PLUG-CONVERSION BAG PP BAG PE BAG PE BAG ZIPPER CBF INTERFACE-DATA LINK CABLE ADAPTOR-SGHT809 BLK S/W CD-SAMSUNG PC STUDIO UNIT-EARPHONE(BLK) LABEL(R)-WATER SOAK T_MOBILE LABEL(R)-MAIN LABEL(TMB) CUSHION-COVER(TMB) CUSHION-CASE(LOW) BOX(P)-SGHT809(T-MOBILE) MPR-BOHO VINYL LCD CONN MPR-TAPE PBA A MPR-TAPE MAIN WINDOW MPR-TAPE MAIN CONNECTOR MPR-BOHO VINYL INPUT BEF MPR-BOHO VINYL KEYPAD MPR-BOHO VINYL M/WIN FIN PAA ETC-SGHT809(TMB)
1109-001313 3719-001319 3721-001057 6902-000377 6902-000378 6902-000634 6902-000683 GH39-00444A GH44-01077A GH46-00180A GH59-02541A GH68-05914A GH68-08671A GH69-02746A GH69-03211A GH69-03212A GH74-15350A GH74-16066A GH74-17833A GH74-17844A GH74-18886A GH74-19130A GH74-19266A GH99-12134A
3-3. Test Jig (GH80-03306A)

3-3-1. USB JIG Cable

3-3-2. RF Test Cable (GH39-00397A)
3-3-3. Test Cable (GH39-00459A)
3-3-4. Serial Cable (CSA LL64151-A)
3-3-5. Power Supply Cable
3-3-6. DATA CABLE (GH39-00444A]

3-3-7. TA (GH44-01077A]

5. Block Diagrams
5-1. RF Solution Block Diagram

DPDT Switch NJG1524PC1

NTK FEM LMG004W-5129A Philips Transceiver UAA2687E

Triquint PAM TQM7M5004

SPDT Switch PG2012TB
SPDT Switch FAR-G5ED-897M50-D2DE PG2012TB

FUJITSU TX SAW

This Document can not be used without Samsung's authorization

Block Diagrams

5-2. Base Band Solution Block Diagram
Sub MIC MIC BB INTERFACE Serial Data Interface D-CLASS AMP I/O Interface VIBRATOR Battery Type Battery Voltage Battery Temperature

RECEIVER Stereo Speaker

PCF5213EL1

A/D Interface

D1VDD D2VDD

SYSTEM CLOCK (26MHz)

D3VDD BLUETOOTH AVDD

HERA TV

BLUETOOTH

VINT IOVDD

1G OneNAND MEMORY

VDD_RX_TX VCC_SYN

KEY_BOARD
MIC_BIAS Li-Ion Battery (Slim,Standard) CPVDD SIMEN GPO

RF CHIP

Charging Circuit PAM

RTC_CLOCK (32.768KHz)

VCHG SIM CARD VSAVE
6-1. Main PCB Top Diagram
6-2. Main PCB Bottom Diagram

6-3. Sub PCB Top Diagram

6-4. Sub PCB Bottom Diagram

7-1. Power On

ONKEYN C405

C406 R401

OSC400

BU_RST

typical 3.8V VBAT TA410 VR400 C411 C426

BAT409

2.8V +VDD_RX_TX

+VDD_CAM +VCC_SYN C413

CHGCUR/BATMAX

CHGDRV

CPVBAT

_ONKEY

SCP SCN D3VDD SIMD3VBAT
C418 C419 C420 BT_RST TP401 C54 TP402 R404 +VDD_IO_LOW
24 RF2VDD 23 RF12VBAT +VDD_1VRF1VDD CD1VDD 20 LPD1VBAT 19 LPVDD 18 +AVDD CHCVDD 16 D2VDD 15 IOD2VBAT 14 IOVDD +AVDD_HFA C_REC2 HCVBAT

SIMVCC

SIM_VCC SIM_IO SIM_CLK SIM_RST

3 G G G G SIM5 4

SIMIOCD SIMCKCD _SIMRSCD SIMEN GPO3 GPO2 GPO1 GND GND GND GND NC NC

_SIMRSHC

SIMCKHC

SIMIOHC

PWREN1

PWREN2

MICBIAS

_RSTHC

CLK32K

+VDD_IO_HIGH C424

AUX_ON SCL SDA 32KHz_DIGIT PON_TX
+VDD_IO_LOW REF_ON C425 SIMRST SIMCLK
+VDD_IO_HIGH +VDD_IO_LOW +VDD_RX_TX +VCC_SYN +AVDD +AVDD_HFA MIC_BIAS +VDD_1V8 +VDD_GSM_CORE VDD_CAM
2.9V 1.8V 2.8V 2.8V 2.6V 2.6V 2.1V 1.8V

MIC_BIAS C423

IT_PMU 1.875V 2.9V SIMIO

7-2. Initial

+VDD_IO_LOW
HA(1:16) HA(1) HA(2) HA(3) HA(4) HA(5) HA(6) HA(7) HA(8) HA(9) HA(10) HA(11) HA(12) HA(13) HA(14) HA(15) HA(16) HA(17) HA(18) HA(19) HA(20) HA(21) HA(22) HA(23) HA(24) K6 C2 D2 E2 C3 D3 E3 C4 F8 C9 D9 D10 E9 E10 D11 C10 G7 B4 D4 E8 D8 D6 C11 D12 A2 A3 A10 A11 A12 R1 R2 R3 R10 R11 R12 HD(0) HD(1) HD(2) HD(3) HD(4) HD(5) HD(6) HD(7) HD(8) HD(9) HD(10) HD(11) HD(12) HD(13) HD(14) HD(15) R304 IN OUT 4 WAITn WEn M5 L6 M6 N7 K7 M8 L9 M10 J7 J8 M7 L7 L8 H8 M9 M11

U721 KEY_COL(4) KEY_COL(3) KEY_COL(2) KEY_COL(1)

7-9. Receiver Part

RFSIG0 RFSIG1 RFSIG2 GPIOA3 GPIOA4 GPIOA5 RFSIG6 RFSIG7 GPIOA21 GPIOA22 GPIOA23
R13 M12 M11 V5 P9 L11 R11 P11 T2 R2 R5
MODE_SELECT PON_SW PON_PA IT_PMU IMAGE_INT PON_TX PON_3587_SYNTH
TP232 DCS GSM850 RF_CLK RF_DATA CLKBURST RF_EN RSTEXTn D_REF_CLK EDGE1_PA AFC RAMP_GSM C218
U18 RFCLK1 R17 RFDO1 G1 GPIOA9 V18 RFEN0 RESET MCLK H1 V10
R9 AUXDAC1 R8 AUXDAC2 V11 AUXDAC3 U14 VREF V12 MICBIAS UCP200 QN QP IN IP AUXADC1 AUXADC2 AUXADC3 AUXADC4 AUXADC5 V8 V7 U8 U7 J1 K1 K2 L1 L2
RX_TX_QN RX_TX_QP RX_TX_IN RX_TX_IP MES_BATT VF TEMP_PRODUCT EAR_ADC
J17 HFR1 H18 HFR2 K15 EAR1 J15 EAR2 MICN MICP AUXMICN AUXMICP ANL ANR M18 N18 L17 M17 K18 L18
HFR_P HFR_N EAR1 EAR2 MIC_N MIC_P AUXMICN AUXMICP
D13 FSC E11 DCL B13 DD B14 DU N1 GPIOA24 T1 GPIOA25 L9 GPIOA26 U17 SCL M14 SDA P8 GPIOA30 P6 GPIOA27 R6 GPIOA28 SIMCLK SIMIO SIMPWR SIMRST GPIOA17 GPIOA29 GPIOA31 G17 D15 N14 F17 V2 V3 V4
FSC DCL DD DU AUDIO_SEL BACKLIGHT END_OF_CHG
DAI & Bluetooth data Interface
VDD_SD_EN MIC_SEL1 MIC_SEL2 SIMCLK SIMIO CHG_ON SIMRST KEYLED_ON SLIDER_KEY_ON

RECEIVER

SPK+ HFR_P L804 L805 HFR_N SPKSPK800
7-10. Back Light (for LCD)

7-11. Key Back Light

typical 3.8V VBAT +VDD_BL USEL VOUT 4

KEYLED_ON

1 STBY 2 GND 3 VIN GND 6

7-12. Sub Key Back Light

Typical 3.8V VBAT

USEL VOUT 4

SLIDER_KEY_ON R837 VR810
1 STBY 2 GND 3 VIN GND 6 C853

R806 91

R807 91

R801 91

R802 91

LED810

LED805

LED801

KEY_LED

LED807

7-13. Camera part

+VDD_CAM

+VDD_CAM_CORE

CAMERA CONNECTOR

+VDD_CAM_CORE R830 HDC24 NC NC 22 24

STANDBY

M_SDA M_CLK VSYNC Y(3) Y(5) Y(7) Y(1)
M_SCL S_RST HSYNC Y(4) Y(6) Y(2) Y(0)
+VDD_GSM_CORE +VDD_HERA +VDD_CAM +VDD_IO_HIGH

LD(0:15)

VR302 C306

VR300 C305

VR301 C304 C303
VDDG1 VDDSPI VDDUSB VDDSD VDDAC VDDLCD VDDS VDDPLL VDDC VDDC VDDC VDDC VDDI VDDI VDDI
P10 L10 H4 B6 P13 H5 D5 B13 K6 G4 D8 A4 L6 F5 A9
LD(0) LD(1) LD(2) LD(3) LD(4) LD(5) LD(6) LD(7) LD(8) LD(9) LD(10) LD(11) LD(12) LD(13) LD(14) LD(15)

LCD_MAIN_CS L_WRB RS

TP311 TP312 TP313
P5 N4 P2 P1 N2 N3 N1 M2 M1 L4 L2 L1 K1 K5 K4 J5 J4 K2 J1 P4 P3 N5 J2 N6 H1 H2 K8 K9 K11 K13 K14 J14 L8 M13 L11 M14 J13 H13 H14
L_DA0 L_DA1 L_DA2 L_DA3 L_DA4 L_DA5 L_DA6 L_DA7 L_DA8 L_DA9 L_DA10 L_DA11 L_DA12 L_DA13 L_DA14 L_DA15 L_DA16 L_DA17 L_CS_N LS_CS_N L_WR_N L_RD_N L_ADS L_PCLK USB_DP USB_DM TMS TRST TDI RTCK TCK TDO S_SCK S_SSN S_MOSI S_MISO T_OUT T_VRO T_VREF
M_SA0 M_SA1 M_SA2 M_SD0 M_SD1 M_SD2 M_SD3 M_SD4 M_SD5 M_SD6 M_SD7 M_SD8 M_SD9 M_SD10 M_SD11 M_SD12 M_SD13 M_SD14 M_SD15 M_CS_N MS_CS_N M_RD_N M_WR_N M_ADS M_INTR M_HOLD XIN XOUT C_D0 C_D1 C_D2 C_D3 C_D4 C_D5 C_D6 C_D7 C_HS C_VS C_RST C_PCLK C_MCLK C_SDA C_SCK
D14 TP300 E9 TP301 B10 H10 H11 TP302 G14 G13 F14 G10 F13 G11 F10 F11 E13 E14 E10 E8 E11 D13 A10 D11 A14 A13 D7 E7 D10 C14 C13 C1 E4 D2 D1 E5 E2 E1 F4 A2 A1 A3 D4 C2 B2 B1 N13 N12 L9 N14 P14 L7 K7 B7 A7 D6 B5 A5 E6 A12 B11 A11 D9
HA(1) HA(2) HD(0:15) HD(0) HD(1) HD(2) HD(3) HD(4) HD(5) HD(6) HD(7) HD(8) HD(9) HD(10) HD(11) HD(12) HD(13) HD(14) HD(15)
CS3n_IMAGE OEn WEn HA(20) IMAGE_INT M_HOLD OSC300

EARSPK_COM T_OUT

+VDD_TV R306
Y(0) Y(1) Y(2) Y(3) Y(4) Y(5) Y(6) Y(7)

Y(0:7)

4 GND2

C308 GNDHOT 1

VDD_TV_EN

STANDBY VDD_CAM_EN

P6 P7 N7 N8 P8 N9 N10 P9 N11 P11 L14 K10 B8 A8 G2 G1 B4 P12 F2 B12
GPIO1_D0 GPIO1_D1 GPIO1_D2 GPIO1_D3 GPIO1_D4 GPIO1_D5 GPIO1_D6 GPIO1_D7 GPIO2_D8 GPIO2_D9 GPIO2_D10 GPIO2_D11 GPIO2_D12 GPIO2_D13 GPIO2_D14 GPIO2_D15 STROBE TESTMODE C_PWDN M_RESET_N
HSYNC VSYNC S_RST PCLK M_CLK M_SDA M_SCL I2S_MCKI I2S_BCK I2S_LRCK I2S_SDATAOUT I2S_SDATAIN
D_MSCK D_BCK D_LRCK D_SDATAOUT D_SDATAIN D_SDA D_SCK SD_D0_SCLK SD_D1_SCMD SD_D2_SD_0 SD_D3_SD_1 SD_D4_SD_2 SD_D5_SD_3 SIN0 SOUT0 XCTS0 XRTS0
TP315 IMAGE_RST TP310 R340
NC NC VSS VSS VSS VSS VSS VSS VSSQ VSSPLL AVSSTV AVDDTV

+VDD_TV

L13 L5 G5 F1 B9 B3 A6 B14 J10 J11

7-13. GSM850 Receiver

7-14. GSM850 Transmitter

7-15. GSM900 Receiver

7-16. GSM900 Transmitter

7-17. DCS Receiver

7-18. DCS Transmitter

7-19. PCS Receiver

7-20. PCS Transmitter

GSM850

RFS100 KMS-512 ANT102 ANTCON-T2 VR102 R4 G A C G GSM900RXTX

+VCC_SYN

ANT101

ANTCON-T809

R624 L141 C147 C102 +VCC_SYN L121 C103 L118

BT_ANT

C104 GND

16 PB2 PA2

J_ANT 8 GND

FESW1 FESW2 FESW3

R135 R136 R137 GND

GND GND

C159 C160
ANT EGSMRX VC1 EGSMRX VC2 DCSRX VC3 DCSRX DCS|PCSTX 11 850GSM|EGSMTX PCSRXPCSRX7 850GSMRX 6 850GSMRX G

GSM900 RX

7 VCTL1

5 PBPA1

L103 +VCC_SYN +VCC_SYN C110

PON_3587_SYNTH C109

Tx(GSM900)

Tx(DCS1800/1900)

L140 C112
TCX100 RL137 OUT GND CVCC C114 2

RX(GSM900)

PCS Rx

Rx(DCS1800)

Rx(PCS1900)

C120 C121

1 VCON

R103 R105

DCS Rx

C122 L106

DCS_TX
SWBIA SWBIB GNDRF1 HBIA HBIB

CLKFDBX

C124 REFVCC

EXTRES

RFTUNE

VCCSYN

GNDREF

VCCRFLO

GSM_TX

CLKOUT

D_REF_CLK

GNFRF2

PGMDIV VDDL GNDL

LBO EN TXVCC CLK RF_CLK

PON_PA PON_SW R128

C131 2.8V +VDD_RX_TX

SWON DATA

RF_DATA

2.8V +VDD_RX_TX C128

typical 3.8V

GND2 GND3 GND4 NC1 NC2

GND1 41

FESW3 6

FESW2 5

FESW1 4

GNDRF4 3

GNDRF3 1
PAM100 TQM7MDCS/PCSIN CVCC DCS_TX DCS/PCSOUT 14

MODE_SELECT

R114 RX_TX_QP 10 R115 C152 L138 RX_TX_QN R116 FESW1 FESW2 FESW3 R117 RX_TX_IN RX_TX_IP
R113 CGSM850/900IN GSM850/900OUT
BAND TX_EN VBATT MODE VRAMP VBIAS

GND GND GND GND GND GND

17 C144
C139 U104 C2 G1 IN1 L117 F102 C142 IN1 G2 G4 G3 OUT2 OUT4 C155
UVDD OUT1 GND C141 C156 OUT2 IN VCONT 2 OUT1 GND 3 OUT2 VDD IN VCONT 4 GSM_TX GSM900RXTX VR100 2.8V +VDD_RX_TX

 

Technical specifications

Full description

The SGH-t809 is the latest mobile innovation with Bluetooth wireless technology, megapixel camera, speakerphone and it's confined in a slim design that is sure to turn a few heads. Go wireless and connect your SGH-t809 without wires to your Bluetooth enabled computer and headset. Take and share pictures with family and friends with the built-in digital camera. Get even closer with the digital zoom. Play your favorite songs and store them on the phone or a memory card so you can take your tunes with you. Gather your friends around for a group call for a hands-free conversation. Send recorded speech with text messages or use Wireless Village for instant messaging including AOL, ICQ and YAHOO. Play your MP4 or 3GP videos on the crisp 262K resolution QVGA screen.

General
Product TypeCellular phone
Phone DesignSlider
Integrated ComponentsDigital camera, digital player
AntennaInternal
Width2.1 in
Depth0.6 in
Height3.9 in
Weight3.3 oz
Body ColorBlack
Cellular
TechnologyGSM
BandGSM 850/900/1800/1900 (Quadband)
Service ProviderNot specified
Messaging & Internet
Cellular Messaging ServicesSMS
Instant Messaging ServicesAOL Instant Messenger Service (AIM), Wireless Village 1.1, ICQ, Yahoo! Messenger
Internet BrowserYes
Communications
Wireless InterfaceBluetooth
Telephone Features
SpeakerphoneYes
Call TimerYes
Conference Call CapabilityYes
Polyphonic RingerYes
Vibrating AlertYes
Additional FeaturesBuilt-in stereo speakers
Organizer
CalculatorYes , basic
Alarm ClockYes
CalendarYes
ReminderYes
Synchronization With PCYes
Digital Player (Recorder)
Supported Digital Video StandardsMPEG-4, 3GP
Digital Camera
Sensor Resolution1.3 Megapixel
Display
TypeLCD display - color
TechnologyTFT
Display Resolution320 x 240 pixels
Color Depth262,144 colors
Multi-language MenuYes
FeaturesScreensaver, backlit
Battery
TechnologyLithium ion
Run Time DetailsTalk - up to 258 min Standby - up to 130 hrs
Miscellaneous
Included AccessoriesPower adapter
Universal Product Identifiers
BrandSamsung
Part NumberSGH-T809
GTIN00610214611994

 

Tags

CD-2E YST-SW216 VSX-D938TX LTV1280A Cosmos 42LC55-ZA AEC AWT1332AA Sportrak MAP CS-F34db4e5 KH 701 Pdks 120 PG-6200 2720S Boxter S CW-29Z306T 3 5 Ur2580H - 2004 Samsung C450 HD9120 55 PM-700 M6P89 Type 320 Psr-210 Grill Unlock Code Manual Ii 7988 775V88 RM-TP501 Syncmaster 940T D-E441 Combitrim A720 IS Explorer Plus 6 1PP S3500 RF-U300 DVD-HR721 Ericsson G700 Perfection 1260 AR-P350 Flatbed SB-400 DP-990 M-504 GH22LS40 Caddy-2004 CH-403C DX-708 TPS II ALX2000 DCR-SR62E 32PFL7605H Tmobile Outdoor Server EKC60752X 230V 9-5 2001 CMT-EX5 FX324 AV220D2 CT1500 VGN-FE31M XD-353 DUO Luxe S-H509V Gpsmap 620 KDC-X711 PMC-05PRO3 Insert CT-W504R 2690 SMS DVX492H Guitar RH-706 Printer EOK76030X Starcraft W1942TQ-BF BH-303 LE32A451 600 S GM-X364 XE-DA Sagem 2616 AJ260-12 C 6002 X203N DSC-S950 B HR7620 Iwde 12 Montreal CD34 Synkron 400 SL-3300 DVD-LS80 MP7010 FR GEC2630 HT-DS900 SGH-C266 HTR5000

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101