[ VP-D453]
< PED Version 1.03 >
PRODUCT ECO-DECLARATION for Samsung [DVC VP-D453]

PRODUCT DESCRIPTION

Type and Model: [ DVC VP-D453 ] Weight: [ 350 ] g (net product Wt.) Dimension (WDH) : [ 53.5 ]mm x [74.5]mm x [ 102 ]mm

ENERGY CONSUMPTION

EPS electricity consumption without electrical load - 115V / 60HZ : 0.3W - 230V / 50Hz : 0.4W EPS energy efficiency - 115V / 60HZ : 74.1% - 230V / 50Hz : 73.1%

ACOUSTIC NOISE

SET, Zoom S/N ratio : 35dB
HAZARDOUS SUBSTANCE CONTENTS
This product does NOT contain following substances corresponding to 2002/95/EC and 76/769/EEC Asbestos Cadmium (Cd) Lead (Pb) Mercury (Hg) Hexavalent chromium (Cr+6) Ozone depleting substances as listed in the Montreal Protocol Polybrominated biphenyls (PBBs) Polybrominated diphenylethers (PBDEs) Polychlorinated biphenyls(PCB), Polychlorinated terphenyls(PCT), Polychlorinated naphthalene (PCN) Short-chain chlorinated paraffins ( 50% wt Cl, C=10~13,)
Further information on Samsung Electronics hazardous substance phase out program can be found at: http://www.samsung.com/uk/aboutsamsung/positionpaper.pdf
Copyright 2005 Samsung Electronics. All rights reserved. This document is issued as a matter of information only and all the data can be changed without notice. This document may not be reproduced or transmitted in any means without the prior written permission of Samsung.

PACKAGING

Material composition of product packaging: Lists of Material type Paper (BOX) PE (BAG) EPS (CUSHION) Total Wt. (g) Packaging box volume : [ 4,132 ] cm3 - Dimension (WDH) : [ 185.5 ]mm x [ 150 ]mm x [ 148.5 ]mm The product packaging does NOT contain: - heavy metals according to 94/62/EC. - ozone depleting substances as listed in the Montreal protocol - PVC. Plastic packaging material is marked according to ISO 11469, DIN 6120, ISO 1043-1 to 4 or the related legislation of Korea & Japan. Weight (g) 100.57 3.50 13.00 117.07

BATTERY

Battery type: [ LI-ION ] Weight: [ 100 ] g
The battery cell does NOT contain lead, cadmium and mercury in accordance with EU Directives 91/157/EC.
DISASSEMBLY AND RECYCLING
Mechanical plastics parts, heavier than 25g have material codes in accordance with ISO 11469 and ISO 1043-1 to 4 to facilitate plastics recycling. Samsung Electronics offers product take-back and recycling services for Samsung products in the countries where local take-back legislation is implemented and expands additional voluntary take-back system. Domestic customers: please contact your local government authority for more information on where and how to recycle this product. Business users: please contact your local Samsung Electronics sales office for details of take-back and recycling options.

COMPANY INFORMATION

Environmental Policy Samsung Electronics strives to play a leading role in creating a sustainable society by recognizing and implementing environment, health and safety issues as crucial factors in all our business endeavors. To this end, all of Samsung Electronics business activities observe our Green Management Policy. Originally established in 1992, the current Green Management Policy is available online at GM REPORT Website. ISO 14001 As part of the effort to reduce environmental impacts in its general management activities, Samsung Electronics is committed to achieving ISO14001 certification for all our factories throughout the world. All Samsung Electronics factories located in South Korea have achieved certification to both ISO 14001 and OHSAS 18001. A total of 21 of Samsung Electronics 27 overseas factories have obtained ISO 14001 certification as of 2004 and the remaining 6 are working towards achieving Certification in the near future.

FURTHER INFORMATION

Further information is presented in Samsung Electronics Green Management Report, available online at: http://www.samsung.com/AboutSAMSUNG/ELECTRONICSGLOBAL/SocialCommitment/Grepo rt/index.htm

PictBridgeTM (VP-D453(i)/D454(i)/D455(i) Only).... 109 Maintenance...... 111
After Finishing a Recording......111 Cleaning and Maintaining the Camcorder.....112 Using Your Camcorder Abroad......113
Troubleshooting..... 114 Specifications..... 117 Index...... 118 Power Sources (United Kingdom Only)....119
Notes and Safety Instructions
Notes regarding the Rotation of the LCD Screen
Please rotate the LCD screen carefully as illustrated. Over rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. 1 1. LCD screen closed.
2. Standard recording using the LCD screen. I Open the LCD screen with your finger.

LCD open

3. Recording when looking at the LCD screen from the top.
4. Recording when looking at the LCD screen from the front.
5. Recording when looking at the LCD screen from the left.
6. Recording with the LCD screen closed.
Notices regarding Copyright (VP-D451i/D453i/D454i/D455i Only)
Television programmes, video tapes, DVD titles, films, and other programme materials may be copyrighted. Unauthorized copying of copyrighted material may be against the law. All the trade names and registered trademarks mentioned in this manual or other documentation provided with your Samsung product are trademarks or registered trademarks of their respective holders.
Notes regarding Moisture Condensation
1. A sudden rise in atmospheric temperature may cause condensation to form inside the Camcorder. for example: I When you move the Camcorder from a cold location to a warm location (e.g. from outside to inside during the winter.) I When you move the Camcorder from a cool location to a hot location (e.g. from inside to outside during the summer.) 2. If the (DEW) protection feature is activated, leave the Camcorder for at least two hours in a dry, warm room with the cassette compartment opened and the Battery pack removed.
Notes regarding Camcorder

Lithium Battery Installation (VP-D453(i)/D454(i)/D455(i) only)
Battery Installation for the Remote Control You need to insert or replace the Lithium battery when: - You purchase the Camcorder. - The remote control doesnt work. Position the Lithium battery in the Lithium battery holder, with the positive ( Be careful not to reverse the polarity of the battery.

) terminal face up.

[ Notes ] I The Lithium battery must be inserted in the correct direction. I Do not pick up the battery using tweezers or other metal tools. - This will cause a short circuit. I Do not recharge, disassemble, heat or immerse the battery in water, to avoid the risk of explosion.
Warning: Keep the Lithium battery out of the reach of the children. Should any battery be swallowed, consult a doctor immediately.
Connecting a Power Source
There are two types of power source that can be connected to your Camcorder. - The AC Power adapter and AC Cord: used for indoor recording. - The Battery pack: used for outdoor recording. To use the AC Power Adapter and DC Cable 1. Connect the AC Power adapter to the AC Cord. 2. Connect the AC Cord to a wall socket.
[ Notes ] I You must use an AA-E8 TYPE AC Power adapter. I The plug and wall socket type may differ according to your resident country.

Power Switch

3. Connect the DC cable to the DC jack socket of the Camcorder. 4. Set the Camcorder to each mode by holding down the tab on the Power switch and turning it to the CAMERA or PLAYER mode.
<CAMERA mode> <PLAYER mode>
To Select the Camcorder Mode (VP-D453(i)/D454(i)/D455(i) only)
If you want to use this unit as a Camcorder, set the Mode switch to TAPE. If you want to use this unit as a DSC (Digital Still Camera), set the Mode switch to MEMORY.
Using the Lithium Ion Battery Pack
The amount of continuous recording time available depends on. - The type and capacity of the Battery pack you are using. - How often the zoom function is used. It is recommended that you have several batteries available.
Charging the Lithium Ion Battery Pack 1. Attach the Battery pack to the Camcorder. 2. Connect the AC Power adapter to an AC Cord and connect the AC Cord to a wall socket. 3. Connect the DC cable to the DC jack socket on the Camcorder. 4. Turn the Power switch to OFF, and the charging indicator will start to flash, showing that the battery is charging.

[ Note ] When you are recording, the Beep Sound is automatically set to Off.
Camera Mode Back Clock Set Beep Sound USB Version Language Demonstration Move
Setting the Shutter Sound (VP-D453(i)/D454(i)/D455(i) only)
The Shutter Sound function works in both Player and M.Cam modes. You can turn the Shutter Sound on or off. When on, a simulated shutter click of a camera will sound while taking pictures.
1. Set the Power switch to CAMERA or PLAYER. 2. If the Power switch is set to CAMERA mode, set the Mode switch to MEMORY. If the Power switch is set to PLAYER mode, set the Mode switch to TAPE. 3. Press the MENU button. I The menu list will appear. 4. Move the Menu selector to the left or right to select System, then press the Menu selector. 5. Move the Menu selector to the left or right to select Shutter Sound, then press the Menu selector. 6. Move the Menu selector to the left or right to select On or Off, then press the Menu selector. 7. To exit, press the MENU button. 6 4
Player Mode System Clock Set Beep Sound Shutter Sound USB Version Language Move

On On USB 2.0 English

Player Mode Back Clock Set Beep Sound Shutter Sound USB Version Language Move
Viewing the Demonstration
Before you begin: Make sure that there is no tape inserted in the Camcorder. (see page 36) Demonstration automatically shows you the major functions that are included with your Camcorder so that you may use them more easily. The Demonstration function may only be used in the Camera mode without a tape inserted in the Camcorder. The Demonstration operates repeatedly until the Demonstration mode switched off. 1. Set the Power switch to CAMERA. 2. Set the Mode switch to TAPE. (VP-D453(i)/D454(i)/D455(i) only) 3. Press the MENU button. I The menu list will appear. 4. Move the Menu selector to the left or right to select System, then press the Menu selector. 5. Move the Menu selector to the left or right to select Demonstration, then press the Menu selector. 6. Move the Menu selector to the left or right to select On, then press the Menu selector. 7. Press the MENU button. I The Demonstration will begin. 8. To quit the Demonstration, press the MENU button.

3. W(Wide angle) side: Subject appears farther away. I You can record a subject that is about 10mm (about 0.5 inch) away from the lens surface in the Wide position.

Using the Tele Macro

The Tele Macro function works in both Camera and M.Cam mode. Effective focal distance in Tele Macro mode is 50 Cm (19.7 inches) ~ 100 Cm (39.4 inches). 4
Camera Mode Camera Program AE White Balance Digital Effect Macro DIS Digital Zoom Move
1. Set the Power switch to CAMERA. 2. Set the Mode switch to TAPE or MEMORY. (VP-D453(i)/D454(i)/D455(i) only) 3. Press the MENU button. I The menu list will appear. 4. Move the Menu selector to the left or right to select Camera, then press the Menu selector. 5. Move the Menu selector to the left or right to select Macro, then press the Menu selector. 6. Move the Menu selector to the left or right to select On or Off, then press the Menu selector. 7. To exit, press the MENU button. I Tele Macro ( ) icon will be displayed.
[ Notes ] I When recording in Tele Macro mode, the focus speed may be slow. I When you operate the Zoom function in the Tele Macro mode, the recording subject may be out of focus. I Use a tripod to prevent hand shake in the Tele Macro mode. I Avoid shadows when recording in the Tele Macro mode. I As the distance to the subject decreases, focusing area narrows. I When you can not get proper focus, use the Zoom Lever.
Auto Auto Off Off Off Off
Camera Mode Back Program AE White Balance Digital Effect Macro DIS Digital Zoom Move
Using Quick Menu: Tele Macro
Quick menu is used to access Camcorder functions by simply using the Menu selector. Quick menu provides easier access to the frequently used menus without using the MENU button.
1. Press the Menu selector. 2. Move the Menu selector to the left or right to select Macro, then press the Menu selector. 3. Move the Menu selector to the left or right to select On or Off, then press the Menu selector. 4. To exit, press the MENU button.
Macro DIS Program AE White Balance Shutter Exposure Manual Focus

STBY Off

STBY Off On
Using the Fade In and Out
The Fade function works only in Camera mode. You can give your recording a professional look by using special effects such as fade in at the beginning of a sequence or fade out at the end of a sequence.
To Start Recording 1. Set the Power switch to CAMERA. 2. Set the Mode switch to TAPE. (VP-D453(i)/D454(i)/D455(i) only) 3. Before recording, hold down the FADE button. I The picture and sound gradually disappear (fade out). 4. Press the Start/Stop button and at the same time release the FADE button. Recording starts and the picture and sound gradually appear (fade in). To Stop Recording (use Fade In/Fade Out) 5. When you wish to stop recording, hold down the FADE button. I The picture and sound gradually disappear (fade out). 6. When the picture has disappeared, press the Start/Stop button to stop recording. a. Fade Out (Approx. 4 seconds)

Selecting the Audio Mode

The Audio Mode function works in both Camera and Player modes. This Camcorder records sound in two ways. (12Bit, 16Bit) - 12Bit: You can record two 12Bit stereo sound tracks. The original stereo sound can be recorded onto the Main (Sound1) track. Additional stereo sound can be dubbed onto the Sub (Sound2) track. - 16Bit: You can record one high quality stereo sound using the 16Bit recording mode. Audio dubbing is not possible when using this mode.
4. Move the Menu selector to the left or right to select Record, then press the Menu selector. 5. Move the Menu selector to the left or right to select Audio Mode, then press the Menu selector. 6. Move the Menu selector to the left or right to select desired audio mode(12Bit or 16Bit), then press the Menu selector. 7. To exit, press the MENU button.

12Bit 16Bit

0:00:10 60min 16Bit
When 12Bit is selected, no 12Bit indication will be displayed.
Cutting Off Wind Noise (Wind Cut)
The Wind Cut function works in both Camera and Player (Audio dubbing) modes.
Use the Wind Cut when recording in windy places such as the beach or near buildings.
The Wind Cut function minimizes wind noise or other noise while recording. - When the wind cut is on, some low pitched tones sounds are eliminated along with the sound of the wind.
1. Set the Power switch to CAMERA or PLAYER. 2. Set the Mode switch to TAPE. (VP-D453(i)/D454(i)/D455(i) only) 3. Press the MENU button. I The menu list will appear. 4. Move the Menu selector to the left or right to select Record, then press the Menu selector.
6 5. Move the Menu selector to the left or right to select Wind Cut, then press the Menu selector. 6. To activate the Wind Cut function, move the Menu selector to the left or right to select On, then press the Menu selector.
7. To exit, press the MENU button. I Wind Cut ( ) icon will be displayed.
[ Note ] Make sure Wind Cut is set to off when you want the microphone to be as sensitive as possible.
Setting the Shutter Speed & Exposure
The Shutter Speed function works only in Camera mode. The Exposure function works in both Camera and M.Cam modes. Quick menu is used to access Camcorder functions by simply using the Menu selector. 3
STBY Macro DIS Program AE White Balance Shutter Exposure Manual Focus
Set the Power switch to CAMERA. Set the Mode switch to TAPE. (VP-D453(i)/D454(i)/D455(i) only) Press the Menu selector. Move the Menu selector to the left or right to select Shutter or Exposure, then press the Menu selector. 5. Move the Menu selector to the left or right to select Manual, then press the Menu selector. 6. Move the Menu selector to the left or right to select desired shutter speed or exposure, then press the Menu selector. I Shutter speed can be set to 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000 or 1/10000. I Exposure value can be set between 00 and 29. 7. To exit, press the MENU button. I Selected settings are displayed. Recommended Shutter Speeds when Recording Outdoor sports such as golf or tennis: 1/2000 or 1/4000 Moving cars or trains or other rapidly moving vehicles such as roller coasters: 1/1000, 1/500 or 1/250 Indoor sports such as basketball: 1/120

Macro DIS Digital Zoom Move Off Off Off Select
1. Set the Power switch to CAMERA. 2. Set the Mode switch to TAPE or MEMORY. (VP-D453(i)/D454(i)/D455(i) only) 3. Press the MENU button. I The menu list will appear. 4. Move the Menu selector to the left or right to select Camera, then press the Menu selector. 5. Move the Menu selector to the left or right to select White Balance, then press the Menu selector. 6. Move the Menu selector to the left or right to select desired mode (Auto, Hold, Indoor or Outdoor), then press the Menu selector. 7. To exit, press the MENU button. I The selected icon will be displayed. I When the Auto mode is selected, no icon will be displayed. 7 6

Auto Hold Indoor Outdoor

Using Quick Menu: White Balance
Quick menu is used to access Camcorder functions by using the Menu selector. Quick menu provides easier access to frequently used menus without using the MENU button.
1. Press the Menu selector. 2. Move the Menu selector to the left or right to select White Balance, then press the Menu selector. 3. Move the Menu selector to the left or right to select desired mode (Auto, Hold, Indoor or Outdoor), then press the Menu selector. 4. To exit, press the MENU button.
[ Notes ] I The White Balance function will not operate in EASY.Q mode. I Turn the digital zoom off (if necessary) to set a more accurate white balance. I Reset the white balance if lighting conditions change. I During normal outdoor recording, setting to Auto may provide better results.

Outdoor

Setting the Digital Image Stabilizer (DIS)
The DIS function works only in Camera mode. DIS (Digital Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the Camcorder (within reasonable limits). It provides more stable pictures when: - Recording with the optical zoom (Under 10x. DIS is not available in Digital Zoom mode.) - Recording a small object close-up - Recording and walking at the same time - Recording through the window of a vehicle 4 Camera Mode 1. Set the Power switch to CAMERA. 2. Set the Mode switch to TAPE. (VP-D453(i)/D454(i)/D455(i) only) 3. Press the MENU button. I The menu list will appear. 4. Move the Menu selector to the left or right to select Camera, then press the Menu selector. 5. Move the Menu selector to the left or right to select DIS, then press the Menu selector. 6. To activate the DIS function, move the Menu selector to the left or right to select On, then press the Menu selector. I If you do not want to use the DIS function, set the DIS menu to Off. 7. To exit, press the MENU button. I DIS( ) icon will be displayed.
Camera Program AE White Balance Digital Effect Macro DIS Digital Zoom Move Auto Auto Off Off Off Off
7 [ Notes ] I Digital Zoom, Color Nite, Mosaic, Mirror, Emboss2, Pastel2 and 16:9 Wide are not available in the DIS mode. I When you press the PHOTO button while the DIS function is enabled, the DIS will be released shortly and resume automatically after the photo recording.

[ Notes ] I Maximum zooming may result in lower picture quality. I Digital Zoom is not available while DIS, EASY.Q, photo image recording, Color Nite, Mosaic, Mirror, Emboss2, Pastel2 or 16:9 Wide is in use. 6 I Once photo image recording, Color Nite, Mosaic, Mirror, Emboss2, Pastel2 or 16:9 Wide is set, Digital Zoom mode will be released. (The Digital Zoom mode will be backed up.) I Once DIS or EASY.Q is set, Digital Zoom mode will be released.

Off 100x 200x 400x 900x

Photo Image Recording
Photo image recording works only in Camera mode.
1. Set the Power switch to CAMERA. 2. Set the Mode switch to TAPE. (VP-D453(i)/D454(i)/D455(i) only) 3. Press the PHOTO button. I The still picture is recorded for about 6~7 seconds. 4. After the PHOTO has been recorded, the Camcorder returns to its previous mode. Searching for a Photo Image The Photo Search works only in Player mode. 1. Set the Power switch to PLAYER. 2. Set the Mode switch to TAPE. (VP-D453(i)/D454(i)/D455(i) only) 3. Press the MENU button. The menu list will appear. 4. Move the Menu selector to the left or right to select Tape, then press the Menu selector. 5. Move the Menu selector to the left or right to select Photo Search, then press the Menu selector. 6. Press the / (REW/FF) buttons to select the photo. I The photo search process appears on LCD screen while you are searching. I After completing the search, the Camcorder displays the still image. 7. To exit, press the (STOP) or MENU button.
[ Notes ] I Taking a photo image while recording a video is not available. I You can use the remote control to take a photo by using the PHOTO button on the remote control. Pressing the PHOTO button on the remote control records the still image with automatic focusing.
Player Mode Tape Photo Search Photo Copy Audio Select

Sound[1]

Photo Search

0:41:56:10 25min

Search

Cancel

0:44:38:03 25min
Photo Search Photo searching.
(VP-D453(i)/D454(i)/D455(i) only)
When there are no still images recorded on the tape, it will be fully rewound or forwarded. Photo image recording is not available while Color Nite or 16:9 Wide is in use. DIS, Digital Zoom, Color Nite or Digital Effect is not available when taking a photo image. Taking a photo image while EASY.Q, DIS or Digital Zoom mode is in use will release current mode. (After a photo image is taken, the mode will return automatically.)

Dubbing Sound 1. Set the Power switch to PLAYER. I If you want to use an external microphone, connect the microphone to the external MIC input jack on the Camcorder. 2. Set the Mode switch to TAPE. I When you wish to dub using the External A/V input, connect the Multi-AV cable to the Multi-AV jack at the front side of camcorder. (see to page 75) 3. Press the be dubbed. 4. Press the (PLAY/STILL) button and find the time frame of the scene to
(PLAY/STILL) button to pause the scene. 5. Press the A.DUB button on the remote control. I Audio dubbing ( ) icon will be displayed. I The Camcorder is ready for dubbing. 6. Press the 7. Press the (PLAY/STILL) button to start dubbing. (STOP) button to stop the dubbing.
[ Notes ] I You cannot use the Audio dubbing function while playing a write protected video tape. I To utilize an external MIC or sound source, connect a microphone to the MIC jack or use the Multi-AV cable to connect to external sound source input. I To dub an external sound source, set the AV In/Out function to AV In. (VP-D453i/D454i/D455i only) (see page 75)

Dubbed Audio Playback

1. Set the Power switch to PLAYER. 2. Set the Mode switch to TAPE. (VP-D453(i)/D454(i)/D455(i) only) 3. Insert the dubbed tape and press the MENU button. 4. Move the Menu selector to the left or right to select Tape, then press the Menu selector. 5. Move the Menu selector to the left or right to select Audio Select, then press the Menu selector. 6. Move the Menu selector to the left or right to select the audio playback channel, then press the Menu selector. I Sound[1]: play the original sound. I Sound[2]: play the dubbed sound. I MIX[1+2]: play back sound 1 and 2 equally mixed. 7 7. To exit, press the MENU button. 8. Press the (PLAY/STILL) button to playback the dubbed tape.

Sound[2]

Player Mode Back Photo Search Photo Copy Audio Select
Sound[1] Sound[2] MIX[1+2] Select
[ Note ] When you playback added sound (Sound 2 or MIX mode), you may experience a loss of sound quality.

0:01:53:10 20min

IEEE1394 Data Transfer

Using the PC Camera Function To use the PC Camera function, the DV Driver, Video Codec and DirectX 9.0. programmes must be installed in the PC. You can use this Camcorder as a PC Camera. This is useful when connecting to a Web site that provides video chatting functions. When using this camcorder for video conferencing (such as NetMeeting), voice communication may not be supported depending on the video conferencing software. In this case, connect an external microphone to the soundcard of the PC to enable voice communication. You can participate in video conferencing by using the Camcorder with PC Net-meeting programme installed. The PC Camera's screen size (Transfer video frame rate for the PC Camera function is max 15 fps.) I 320X240 (QVGA) pixels for USB 1.1 connection. If PC is connected with the USB to the Camcorder, only the Power, Mode and Zoom switches can be operated. 1. Set the Power switch to CAMERA. 2. Set the Mode switch to TAPE. 3. Connect one end of the USB cable to the USB jack on the Camcorder and the other end to the USB connector on your computer. 2 1
Using the USB Streaming Function
To use USB streaming, the DV Driver, Video Codec, DirectX 9.0. programmes must be installed in the PC. You can view Camcorder video on your PC using USB streaming. You can also store it as a moving picture in the avi file format, or as a still image in the jpg file format on a PC.
1. Set the Power switch to CAMERA or PLAYER, set the Mode switch to TAPE. 2. Connect one end of the USB cable to the USB jack on the Camcorder and the other end to the USB jack on your computer. 3. Setup and execute Windows Movie Maker or the Ulead VIDEO Studio Software application provided on the CD. - For detailed instructions for Ulead VIDEO Studio use, refer to the programmes Help function. - Windows Movie Maker is used for WINDOWS ME and XP users. (C:\program files\Movie maker\moviemk.exe)
Using the removable Disk Function
You can easily transfer data from a Memory card to a PC without additional add-on cards via a USB connection.
1. Set the Power switch to CAMERA or PLAYER, set the Mode switch to MEMORY. 2. Connect one end of the USB cable to the USB jack on the Camcorder and the other end to the USB jack on your computer. 3. To verify whether the removable disk has been properly recognized, open Windows Explorer and locate the removable disk.

Memory Stick [ Notes ] Memory Stick PRO I Memory Stick Duo type or RS-MMC (VP-D454(i)/D455(i) only) should be inserted by using the Adaptor (not supplied). I If you set the Camcorder to M.Player mode, the last recorded still image appears. SD/MMC If there are no recorded images on the Memory Card, No image ! will display on the screen. I While recording, loading, erasing or formatting, do not turn off the power or change the (Usable Memory Card) mode. I Please turn the power off before you insert or eject the Memory Card. You could lose data on the Memory Card. I Do not allow metal substances to come in contact with the terminals of the Memory Card. I Do not bend, drop or apply strong shock to Memory Card. I After pulling the Memory Card out from the Camcorder, please keep the Memory Card in a soft case to prevent static shock. I The stored contents may be changed or lost as a result of misuse, static electricity, electric noise or repair. Save important images separately. I Samsung is not responsible for data loss due to misuse.
Structure of Folders and Files on the Memory Card
The still images that you recorded are saved in a JPEG file format on the Memory Card. The moving images that you recorded are saved in MPEG4 file format on the Memory Card. Each file has a file number and all files are assigned to a folder. - A file number from DCAM0001 is sequentially assigned to each recorded image. - Each folder is numbered from 100SSDVC and recorded on the Memory Card.
DCIM 100 SSDVC DCAM 0001 DCAM 0002. 101SSDVC
Image Format Still Image I Images are compressed in JPEG (Joint Photographic Experts Group) format. I The picture size is 800x600 (Tape Capture 640x480). Moving Image I Images are compressed in MPEG 4 (Moving Picture Experts Group) format. I The picture size is 720x576.

<Still image>

MSAMSUNG SSMOV 100SSMOV

<Moving image>

Selecting the Camcorder Mode
M. Player 000-0000 File number Folder number
You can use this Camcorder as a Digital Still Camera (DSC). You have to set the Mode switch to Memory Card to use this Camcorder as Digital Still Camera.
M.Cam mode (Memory record mode) 1. Set the Power switch to CAMERA. 2. Set the Mode switch to MEMORY. M.Player mode (Memory playback mode) 1. Set the Power switch to PLAYER. 2. Set the Mode switch to MEMORY.
Selecting the Built-in Memory (VP-D454(i)/D455(i) only)
Built-in memory setting is available in the Player/M.Cam/M.Player modes. (VP-D454(i): 16MB/VP-D455(i): 64MB) Images can be stored and played back using the built-in memory. Hence, set the memory type before storing and playing back images. 4
M.Cam Mode Memory Memory Type Photo Quality File No.

All Off This File All Files

001 100-0002

Using Quick Menu: Print Mark
Quick menu is used to access Camcorder functions by simply using the Menu selector. Quick menu provides easier access to the frequently used menus without using the MENU button. It can be set on the selected file only.
1. Press the Menu selector. 2. Move the Menu selector to left or right to select Print Mark, then press the Menu selector.
3. Move the Menu selector to the left or right to select the quantity, then press the Menu selector. 4. To exit, press the MENU button.
[ Notes ] I If the Print Mark is set to This File, you can set the number of copies from 0 to 999. I If the Print Mark is set to All Files, you can set the number of copies to 1. I The All Files option may require extended operation time depending on the number of stored images. I DPOF supporting printers are commercially available. I Use the USB cable provided with the Camcorder.

002 100-0002

PictBridge (VP-D453(i)/D454(i)/D455(i) only)
Printing Your Pictures Using the PictBridgeTM
PictBridgeTM function works only in M.Player mode. By connecting the Camcorder to printers with PictBridge support (sold separately), you can send images from the Memory Card directly to the printer with a few simple operations. With the PictBridge Support, you can control the printer directly through your Camcorder in order to print out stored pictures. For direct printing of your stored pictures using the PictBridge function, you must connect your Camcorder to a PictBridge printer using a USB cable. Connecting to a Printer 1. Turn your printer power off. I Insert the Memory Card on which still images are stored into your camcorder. I Turn your Camcorder on by setting the Power switch to PLAYER. 2. Set the Mode switch to MEMORY. 3. Press the MENU button. I The menu list will appear. 4. Move the Menu selector to the left or right to select System, then press the Menu selector. 5. Move the Menu selector to the left or right to select USB Connect, then press the Menu selector. 6. Move the Menu selector to the left or right to select Printer, then press the Menu selector. I Computer: Connect to a computer. I Printer: Connect to a printer. (To use the PictBridge function, connect to a printer.) 7. Connect your Camcorder to the printer using the provided USB cable. 8. Turn your printer power on. I The PictBridge menu screen appears automatically after a short period. I The cursor highlights Printer. Selecting Images 1. In the PictBridge settings menu, press the / 4

Before contacting a Samsung authorized service centre, perform the following simple checks. They may save you the time and expense of an unnecessary call.

Self Diagnosis Display

Display Blinking slow Tape end ! slow Tape end ! No Tape ! no slow Informs that. Action the Battery pack is almost discharged. Change to a charged one. When the remaining time on the tape is about 2 minutes. the tape reached its end. there is no tape in Camcorder. the tape is protected from recording. Prepare a new one. Change to a new one. Insert a tape. If you want to record, release the protection.
Protection ! slow.D L C R slow
the Camcorder has some mechanical 1. Eject the tape. fault. 2. Set to OFF. 3. Detach the battery. 4. Reattach the battery. * If unresolved contact your local Samsung service centre. moisture condensation has formed in see below. the Camcorder.
Moisture Condensation If the Camcorder is brought directly from a cold place to a warm place, moisture may condense inside the Camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the drum head and be damaged or the unit may not operate correctly. The Camcorder is fitted with a moisture sensor to resist damage under these circumstances. If there is moisture inside the Camcorder, (DEW) is displayed. If this happens, none of the functions except cassette ejection will work. Open the cassette compartment and remove the battery. Leave the Camcorder in a dry, warm room for at least two hours.
Self Diagnosis Display in M.Cam/M.Player Modes (VP-D453(i)/D454(i)/D455(i) only)

Display

Blinking
Informs that. There is no Memory Card in the Camcorder. There is not enough memory to record. There are no images recorded on the Memory Card. The Memory Card is record protected. When you try to delete a protected image. The Camcorder cannot playback. The Camcorder cannot record. The Memory Card needs to format. When processing file delete. If inserted Memory Card is not recognized by the Camcorder.
Action Insert a Memory Card. Change to a new Memory Card. Erase recorded image. Record new images. Release the write protect tab on the Memory Card. Cancel the protection of image. Format a Memory Card or insert Memory Card recorded on this Camcorder. Format a Memory Card or change to a new Memory Card. Format a Memory Card. (see page 100) Wait until delete has been finished. Eject and re-insert the memory card. Try another Memory Card.
No Memory Card ! slow Memory Full ! slow

No image !

Write protect ! Protect ! Read error ! Write error ! Now Formatted ! Now deleted. Memory Card error !
slow slow slow slow slow slow slow
If these instructions do not solve your problem, contact your nearest Samsung authorized service centre.

WARNING

Do not connect either wire to the earth terminal marqueed with the letter E or the earth symbol, or coloured GREEN or GREEN and YELLOW. This page is applicable to Great Britain only.

UNITED KINGDOM

This Samsung product is warranted for the period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned. In case of difficulty, details of our Authorised Service Centres are available from: Samsung Electronics (U.K.) Ltd., Euro Service Centre, Stafford Park 12, TELFORD, Shropshire TF3 3BJ, Tel: 0870) 242 0303, Fax: 01952) 297617 I WARRANTY CONDITIONS 1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been defaced. 2. Samsungs obligations are limited to the repair or, at its discretion, replacement of the product or the defective part. 3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres. No reimbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty.

REPUBLIC OF IRELAND

4. This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in any Country other than the one for which the product was originally designed and manufactured. This warranty will not cover, and no reimbursement will be made for such adaptation nor any damage which may result. 5. This warranty covers none of the following: a) Periodic check ups, maintenance and repair or replacement of parts due to normal wear and tear. b) Cost relating to transport, removal or installation of the product. c) Misuse, including the faiure to use this product for its normal purposes or incorrect installation. d) Damage caused by Lightning, Water, Fire, Acts of God, War, Public Disturbances, incorrect mains voltage, improper ventilation or any other cause beyond the control of Samsung. 6. This warranty is valid for any person who legally acquired possession of the product during the warranty period. 7. The consumers statutory rights in any applicable national legislation whether against the retailer arising from the purchase contract or otherwise are not affected by this warranty. Unless there is national legislation to the contrary, the rights under this warranty are the consumers sole rights and Samsung, its subsidiaries and distributors shall not be liable for indirect or consequential loss or any damage to records, compact discs, videos or audio taper or any other related equipment or material.