Frame rate: Max. 30 fps Resolution: Max. QVGA (320 240) Audio AAC-LC Channel number: Max. 2 channels Sampling frequency: 24, 32, 44.1, 48 kHz Bit rate: Max. 288 kbps per 1 channel
File size The number of files

Max. 2 GB Max. 1,000

This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from from Microsoft or an authorized Microsoft subsidiary. Program 2007 Sony Corporation Documentation 2007 Sony Corporation

Continued on next page

DIGITAL MEDIA PLAYER

9-887-631-05

2007L05-1 2007.12

Sony Corporation

Audio Business Group Published by Sony Techno Create Corporation

Ver. 1.2

Photo*6
File format File extension Codec The number of files Compatible with DCF 2.0/Exif 2.21file format.jpg JPEG (Baseline) Number of pixels: Max. 4,000 4,000 pixels (16,000,000 pixels) Max. 10,000

Interface

Headphone: Stereo mini-jack WM-PORT (multiple connecting terminal): 22 pins Hi-Speed USB (USB 2.0 compliant)

Operating temperature

5C to 35C (41F to 95F)
*1 Sampling frequency may not correspond to all encoders. *2 Copyright protected WMA/AAC/AAC-LC files cannot be played back. *3 You cannot record songs on CDs in the ATRAC3 66/105 kbps format using SonicStage. *4 The bit rate description of ATRAC Advanced Lossless shows the bit rate for the contents which enables fast transfer to ATRAC compatible devices or media. *5 Non-standard bit rates or non-guaranteed bit rates are included depending on the sampling frequency. *6 Some video files cannot be played back, depending on their file formats.

Power source

Built-in rechargeable lithium-ion battery USB power (from a computer via the supplied USB cable)

Charging time

USB-based charging Approx.3 hours (full charge), Approx.1.5 hours (approx. 80%)
Maximum recordable number of songs and time (Approx.)
The approximate times are based on the case in which you transfer or record only 4 minutes songs (not including videos and photos) in the ATRAC*1 or the MP3 format. Other playable audio file format song numbers and times may differ from ATRAC or MP3 format. *1 Except ATRAC Advanced Lossless. Compression rate of ATRAC Advanced Lossless varies depending on songs. For example, one CD (containing 15 4-minute songs) is approximately 200 to 500 MB.

SERVICING NOTES.. 3 GENERAL.. 6 DISASSEMBLY
Disassembly Flow... Rear Cabinet Assy... MAIN Board... Holder Connector.. NAND Board, SVX Switch Flexible (PWB Assy).. Note When Installing The SVX Switch Flexible (PWB Assy)... 3-7. Front Button... 3-8. SVX LCD Assy (LCD801), Battery Assy.. 3-9. Front Cabinet Assy...
5-1. 5-2. 5-3. 5-4. 5-5. 5-6. 5-7. 5-8. 5-9.

TEST MODE.. 12 DIAGRAMS

Block Diagram... Printed Wiring Boards MAIN Section (1/2) . Printed Wiring Boards MAIN Section (2/2) . Schematic Diagram MAIN Section (1/6) . Schematic Diagram MAIN Section (2/6) . Schematic Diagram MAIN Section (3/6) . Schematic Diagram MAIN Section (4/6) . Schematic Diagram MAIN Section (5/6) . Schematic Diagram MAIN Section (6/6) . 27

EXPLODED VIEWS

45 NOTE THE CN601 ON THE MAIN BOARD REPLACING When CN601 on the MAIN board is damaged, exchange the new MAIN board for the MAIN board which connector damaged.
MinimumSystem Requirements (for the player)
Computer IBM PC/AT or compatible computer preinstalled with the following Windows operating systems: Windows 2000 Professional (Service Pack 4 or later)/Windows XP Home Edition (Service Pack 2 or later)/Windows XP Professional (Service Pack 2 or later)/Windows XP Media Center Edition (Service Pack 2 or later)/Windows XP Media Center Edition 2004 (Service Pack 2 or later)/Windows XP Media Center Edition 2005 (Service Pack 2 or later)/Windows Vista Home Basic/Windows Vista Home Premium/Windows Vista Business/Windows Vista Ultimate Not supported by 64 bit version OS. Not supported by OSs other than above. CPU: Pentium III 733 MHz or higher (For Windows Vista, Pentium III 800 MHz or higher) RAM: 128 MB or more (For Windows XP, 256 MB or more; for Windows Vista, 512 MB or more) Hard Disk drive: 240 MB or more of available space (1.5 GB or more is recommended) More space may be required, depending on the version of the operating system. Additional space is required for storing music, video and photo data. Display: Screen Resolution: pixels (or higher) (recommended 1,or higher) Colors: High Color (16 bit) (or higher) (SonicStage and Image Converter may not operate properly at color settings at or below 256 colors.) CD-ROM drive (supporting Digital Music CD playback capabilities using WDM) To create original CDs or to back up audio CDs, a CD-R/RW drive is required. Sound board USB port (Hi-Speed USB is recommended) Internet Explorer 6.0 or later and DirectX version 9.0b or later need to be installed. Internet connection is required to use the CD Data Base (CDDB) or Electronic Music Distribution (EMD) or to restore the backup data with SonicStage. When converting Windows Media format videos, it is required to have installed the latest Windows Media Player. When converting QuickTime or M4V format videos, it is required to have installed the latest QuickTime. We do not guarantee operation for all computers even if they meet the above System Requirements. Not supported by the following environments: Personally constructed computers or operating systems An environment that is an upgrade of the original manufacturer-installed operating system Multi-boot environment Multi-monitor environment Macintosh

to conrm. While the memory is being formatted, an animated display appears. When initialization finishes, Memory formatted. appears.
To cancel the operation Select No in step 5 or 6 and press the 7 button to confirm. To return to the previous menu Press the BACK/HOME button.
Do not format the built-in flash memory using Windows Explorer.
ABOUT THE BLUE COLOR TYPE OF THE NWZ-A816 US MODEL Blue color type of NWZ-A816 US model is using parts of violet color type.

Ver. 1.4

COLOR VARIATION
Model Destination CND AEP, UK FR EE E, AUS, JE MX CH CND AEP, UK FR EE E, AUS, JE MX CH CND AEP, UK FR EE E, AUS, JE MX CH US US (CircuitCity) CND, AEP, UK, NZ, HK, SP, AUS FR EE US US (BestBuy) US (CircuitCity) CND, AEP, UK, NZ, HK, SP, AUS FR EE US CND, AEP, UK, NZ, HK, SP, AUS FR EE BLACK z z z z VIOLET z z z z z z z COLOR WHITE PINK z z z z z z z z z z z z z z z z z z SILVER BLUE
z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z
z z z z z z z z z z z z z z z z z

z z z z z z z

z (Note)

z z z z

Note: Blue color type of NWZ-A816 US model is using parts of violet color type. Abbreviation AUS : Australian model CH : Chinese model CND : Canadian model EE : East European model FR : French model HK : Hong kong model JE : Tourist model MX : Mexican model NZ : New Zealand model SP : Singapore model
NW-A805/A806/A808/NWZ-A815/A816/A818 SECTION 2 GENERAL
This section is extracted from instruction manual.

Parts and Controls

1 5-way button*1 Starts playback and enables navigation of the players on-screen menus. 2 BACK/HOME button*2 Press to go up one list screen level, or to return to the previous menu. Press and hold the BACK/HOME button to display the Home menu. 3 WM-PORT jack Use this jack to connect the supplied USB cable, or optional peripheral devices, such as supported accessories for the WM-PORT. 4 Headphone jack For connecting the headphones or the headphone extension cord. Insert the jack pin until it clicks into place. If the headphones are connected improperly, the sound from the headphones may not sound right. Whenusing the headphone extension cord

5 OPTION/PWR OFF button*2 Displays the Option menu. If you press and hold the OPTION/ PWR OFF button, the screen turns off and the player enters the standby mode. If you press any button while the player is in the standby mode, the Now Playing screen appears and the player is ready for operation. Furthermore, if you leave the player in the standby mode for about a day, the player turns completely off automatically. If you press any button when the player is turned off, the start up screen appears first, then the Now Playing screen appears.
8 Strap hole This is used to attach a strap (sold separately). 9 HOLD switch You can protect the player against accidental operation by using the HOLD switch when carrying it. By sliding the HOLD switch in the direction of the arrow, all operation buttons are disabled. If you slide the HOLD switch to the opposite position, the HOLD function is released.
*1 There are tactile dots. Use them to help with button operations. on the *2 Functions of marked with player are activated if you press and hold the corresponding buttons.
The player consumes the battery very slightly even when it is in the standby mode. Therefore, the player might turn completely off in a short time, depending on the power remaining in the battery.
6 VOL+*1/-- button Adjusts the volume. 7 RESET button Resets the player when you press the RESET button with a small pin, etc.

Headphones

Headphone extension cord
NW-A805/A806/A808/NWZ-A815/A816/A818 Ver. 1.3 SECTION 3 DISASSEMBLY
This set can be disassembled in the order shown below.

3-1. DISASSEMBLY FLOW

3-2. REAR CABINET ASSY (Page 7)

3-3. MAIN BOARD (Page 8)

3-4. HOLDER CONNECTOR (Page 8)
3-5. NAND BOARD, SVX SWITCH FLEXIBLE (PWB ASSY) (Page 9)
3-6. NOTE WHEN INSTALLING THE SVX SWITCH FLEXIBLE (PWB ASSY) (Page 9)
3-7. FRONT BUTTON (Page 10)
3-8. SVX LCD ASSY (LCD801), BATTERY ASSY (Page 10)
3-9. FRONT CABINET ASSY (Page 11)
Note: Follow the disassembly procedure in the numerical order given.

3-2. REAR CABINET ASSY

Note 1: Adhesive (rear) cannot re-used. Please replace to brand-new part once adhesive (rear) is removed. Note 2: On installation of hold button, adjust the position of hold switch (S602) hold button.
3 claw 4 two claws 8 rear cabinet assy
(BLACK, SILVER, VIOLET, BLUE models only) 7 spacer (belt)

3 claw

hold button

6 adhesive (rear)

2 claw 1 two ornament pins

About 45

lead wire (black) rear view NAND board
3 Holding the bent part, push in the SVX swtch flexible (PWB assy) until it gets stuck by two claws of the front cabinet assy. 4 Push the lead wires completely into a space between front cabinet assy and LCD holder.

3-7. FRONT BUTTON

2 front button
1 Turn up the LCD flexible board.
3-8. SVX LCD ASSY (LCD801), BATTERY ASSY

1 screw (B1.4)

q; spacer (rear)
4 adhesive (LCD) Note: Adhesive (LCD) cannot re-used. Please replace to brand-new part ones adhesive (LCD) is removed. 1 screw (B1.4)
qa battery assy 9 cushion (BATT) 3 Turn down the LCD flexible board. 7 two claws 6 adhesive (LCD) Note: Adhesive (LCD) cannot re-used. Please replace to brand-new part ones adhesive (LCD) is removed. 5 Open the LCD flexible board. 8 SVX LCD assy (LCD801) 7 two claws 7 claw

3-9. FRONT CABINET ASSY

VOL button
Note: The VOL button should be oriented as shown in the figure when it is installed.
Note: NAND gasket cannot re-used. Please replace to brand-new part ones NAND gasket is removed.

3 NAND gasket

1 VOL button
4 conductive sheet (jack)

front cabinet assy

rear cabinet assy

5 front cabinet assy

front cabinet assy back view

2 gasket (rear)

Note: Gasket (rear) cannot re-used. Please replace to brand-new part ones gasket (rear) is removed.

side view

NW-A805/A806/A808/NWZ-A815/A816/A818 SECTION 4 TEST MODE
Note: Information on the test mode must correspond in enough security. When the leakage has been revealed by any chance, the source of information is specified.
4-1-1. Power supply voltage check This mode is used in case power supply voltage in the state where all power supply lines are starting is checked. Checking method: 1. Enter the test mode. 2. Press the v / V key to select the POWER, and press the key to enter the minor item. 3. Press the v / V key to select the VCHK. 4. Press the u key, all power supply lines are started.

liquid crystal display

1. SETTING THE TEST MODE Note: Perform the test mode in the state of 3.6 V or more in the battery voltage. Setting method: 1. Turn the power on. 2. Press the [BACK] key for 1.5 seconds or more, the home menu is displayed. 3. Slide the [HOLD] key to set the hold on. 4. While pressing the [OPTION] key, press the key as following order. vBVbvuvbVBvu 5. The set reboots when the [HOLD] key is slided to set the hold off, and the color bar is displayed in the liquid crystal display. 6. Enter the test mode when the [BACK] key is pressed in the state of step 5. Note: The destination setting and sound pressure regulation setting cannot be executed by this test mode. 2. RELEASING THE TEST MODE 1. Display the major item selection screen. 2. Press the v / V key to select the EXITTEST, and press the B key to select the SURE ?. 3. Press the u key, turn the power off and release the test mode. 3. CONFIGURATION OF THE TEST MODE

: Date : Time

START changes into OK if the movement of an internal clock is confirmed. 5. Press the [BACK] key, return to minor item selection screen.
4-4-2. Key check The operation of the key is confirmed. Checking method: 1. Enter the test mode. 2. Press the v / V key to select the OTHER, and press the key to enter the minor item. 3. Press the v / V key to select the KEY. 4. Press the u key, all keys are displayed.
4-4-6. Firmware version check The firmware version is displayed. Checking method: 1. Enter the test mode. 2. Press the v / V key to select the OTHER, and press the key to enter the minor item. 3. Press the v / V key to select the FWVER. 4. Press the u key, the firmware version is displayed.
4-4-8. NAND capacity check (since firmware version 1.00.20) Capacity of NAND flash memory, present bud block, maximum bud block, and vender ID are displayed.
Checking method: 1. Enter the test mode. 2. Press the v / V key to select the OTHER, and press the B key to enter the minor item. 3. Press the v / V key to select the NCAPCHK. 4. Press the u key, capacity of NAND flash memory, present bud block, maximum bud block, and vender ID are displayed.
OTHER KEY UP VOL+ REW PLAY FF VOL DOWN OPTION HOLD BACK
OTHER FWVER X.XX.XX OTHER NCAPCHK X @@@@ #### $$$$
5. The character corresponding to the key is selected every time the key is pressed. START changes into OK if all keys are pressed. 6. Slide the [HOLD] key from ON to OFF, return to minor item selection screen. 4-4-3. Format The users area is formatted, and ICV for the video and ICV for audio are initialized. Note: Not used for the servicing. Format the set from Settings Common settings Format when it home menu in usually operates when the set should format it. 4-4-4. Destination setting The destination setting, language information, and sound pressure regulation information are written in the NAND flash memory. Note: Not used for the servicing. 4-4-5. Sound pressure regulation setting ON/OFF of sound pressure regulation is confirmed. Note: Not used for the servicing.

X.XX.XX

: Firmware version
5. Press the [BACK] key, return to minor item selection screen. 4-4-7. NAND capacity check (firmware version 1.00.19 former) Capacity of NAND flash memory is displayed. Checking method: 1. Enter the test mode. 2. Press the v / V key to select the OTHER, and press the B key to enter the minor item. 3. Press the v / V key to select the NCAPCHK. 4. Press the u key, capacity of NAND flash memory is displayed.
: Capacity of NAND flash memory 2/4/8 (2 GB/4 GB/ 8 GB) @@@@ : Number of present bud block (It makes an error the acquisition of the number of bud blocks at 1) #### : Number of maximum bud block (It makes an error the acquisition of the vender ID at 1) $$$$ : Vender ID of NAND flash memory 0x98/0xec (TOSHIBA/SAMSUNG) (It makes an error the acquisition of the vender ID at 1) 5. Press the [BACK] key, return to minor item selection screen. 4-5. Shutdown Function that power supply of set can be turned off without ending static test mode.

OTHER NCAPCHK X GB

Procedure: 1. Enter the test mode. 2. Press the v / V key to select the SHUTDOWN, and press the B key to select the SURE ?. 3. Press the u key, turn the power off while having entered the test mode.
: Capacity of NAND flash memory 2 GB/4 GB/8 GB 5. Press the [BACK] key, return to minor item selection screen.
NW-A805/A806/A808/NWZ-A815/A816/A818 SECTION 5 DIAGRAMS

5-1. BLOCK DIAGRAM

CN851 (1/2) (WM-PORT) D+ D A3 DP A4 DM USB CONTROLLER IC501 SYSTEM CONTROLLER, POWER CONTROL, LCD DRIVER, NAND FLASH INTERFACE, MS INTERFACE, SD-RAM INTERFACE IC601 USB DATA0 USB DATA15 USB ADDRESS1 USB ADDRESS8 H2 G3 F4 G4 IC508 XINT E3 LEVEL SHIFT IC509 F22 J19 F23 E24 AB0_D0 AB0_D15 AB0_A1 AB0_A8 PM0_SO AC22 B8 XI X501 12MHz C8 XO XCS XRD XDACK XDREQ AB0_CSZ2 AB0_RDZ AB0_XACK AB0_XDRQ 32 SDIN A/D CONVERTER, D/A CONVERTER IC302 AOUTA 11 AOUTB COMCOM2 NCNCMUTING Q302 MUTING CONTROL Q301, 304 AIN1A 23 AIN1B AU_L_IN 16 AU_R_IN MUTING Q303 HEADPHONE/LINE SELECTOR IC303

J301 (HEADPHONE)

CD0 CD15 CA1 CA8
NONOCN851 (2/2) (WM-PORT) 14 AU_L_OUT 17 AU_R_OUT
AC5 USB_INT1 AB14 USB_INT2 H16 AB0_WRZ
CRD_LINEOUT AA1 HP_XMUTE Y3

XWRH F3 XWRL H3

D FLIP-FLOP IC505, 506 IC507

E19 FLASHCLK

PM0_SI AD22 SPIO_SO SPIO_SK PM0_CLK PM0_SEN REFCLKO SPIO_SCZ2 ADA_XRST AC8 AC7 AC21 AB22 U18 AD7 AC20
29 SDOUT 25 SDA/CDIN SCL/CCLK SCLK LRCK MCLK AD0/nCS nRESET

XRESET D1

RESET SWITCH IC502

P10 RESETZ AB13 USB_XRST

T26 CKO X603 11.2896MHz U26 CKI AC26 OSCOUT X602 32.768kHz AB26 OSCIN 256Mbit SD-RAM IC701 DQ0 DQ31 A0 A12 BA0 BA1 CLK CS CKE WE CAS RAS DQM0 DQM1 DQM2 DQM3 J7 H8 J1 J8 J2 K8 K7 J9 K9 K1 F8 F2 SDR_D0O SDR_D31 SDR_A00 SDR_A12 AB5 T4 AA5 T3 T1 R5 U8 T5 P5 R4 R3 R2 SDR_DATA0 SDR_DATA31 SDR_A0 SDR_A12 SDR_BA0 SDR_BA1 SDR_CLK SDR_CSZ0 SDR_CKE0 SDR_WEZ SDR_CASZ SDR_RASZ SDR_DQM0 SDR_DQM1 SDR_DQM2 SDR_DQM3
LCD_R0 LCD_R5 LCD_G0 LCD_G5 LCD_B0 LCD_B5 LCD_VSYNC K24 LCD_HSYNC K22 LCD_PXCLK P23
LCD_R0 LCD_R5 LCD_G0 LCD_G5 LCD_B0 LCD_B5 LEVEL SHIFT IC803
LCD_R0 LCD_R5 LCD_G0 LCD_G5 LCD_B0 LCD_B5
LIQUID CRYSTAL DISPLAY LCD801 LCD BACK LIGHT DRIVER IC802
LCD_BLTCTL V17 LCD_PWM1 AD23
LCD_PCI W2 LCD_PON W3 VCC_VBUS VCC_DCIN VCC_VBUS VCC_VBAT VDD_UNREG VDD_UNREG DC/DC CONVERTER ICSYS 21 SYS DC DC USB USB 12 DCIN USB_DET UNREG_OUT
NAND_D0O NAND_D07 E9 D3 M9 C2 B3 C3 A4 E3 D2 H8 J8 K8
NAND_DA0 NAND_DA12 NAND_CLE NAND_ALE NAND_CEZ0 NAND_CEZ1 NAND_CEZ2 NAND_CEZ3 NAND_WEZ NAND_REZ NAND_RBZ0 NAND_RBZ1 NAND_RBZ2 NAND_RBZ3

IC503 R507

R621 R658 C611 R8

C623 R656 R657 C619 R655

R648 R618 C645
C507 H1 G1 H2 G2 H3 G3 H4 G4 H5 G5 H6 G6 H7 G7 H8 G8 F1 E1 D1 C1 B1 F2 E2 D2 C2 B2 F3 E3 D3 C3 B3 F4 C4 B4 F5 C5 B5 F6 E6 D6 C6 B6 F7 E7 D7 C7 B7 F8 E8 D8 C8 B8 A1 A2 A3 A4 A5 A6 A7 A8

C505 R506 R505

8 C514

C510 1

A2 B2 C2 A1 B1 C1

C633 C634

R629 R628

R647 Q603

IC502 IC506

VDR851

R510 C518

VDR852

CL909 22
C502 CL907 1-871-81123 CN851 (WM-PORT) (11)
Note: When CN601, IC501, IC503, IC505, IC506, IC509, IC601, IC701 and IC903 cannot exchange with single. When CN601, IC501, IC503, IC505, IC506, IC509, IC601, IC701 and IC903 are damaged, exchange the entire mounted board.

H26 H25 H24 H23 H22

H19 H18 H17 H16 H15 H14 H13 H12 H11 H10 H9 H8

D9 D8 D7

D3 D2 D1
K19 K18 K17 K16 K15 K14 K13 K12 K11 K10 K9 K8 J19 J18 J17 J16 J15 J14 J13 J12 J11 J10 J9 J8

C683 C682

C612 4

J26 J25 J24 J23 J22

C710 C709
5-3. PRINTED WIRING BOARDS MAIN Section (2/2)
Ref. No. Location D101 D-3 D201 D-3 IC301 IC302 IC303 IC602 IC802 IC803 IC901 D-6 D-5 C-4 C-2 C-2 C-5 E-4 C-3 D-3 C-3 C-3 D-4

CL906 CL628

MAIN BOARD (SIDE B)
CL624 CL635 R910 R905 CL805 CL802 CL804 R641 CL803 CL801 CL627 TH901 CL625 CL629 CL622

C647 C646

R812 C810

R913 C812 C913 C641

R816 C664 R660 C802 R636 FB819 R637 K1 J1 H1 G1 F1 E1 D1 C1 B1 K2 K3 H3 G3 F3 E3 D3 C3 C4 K4 H4 C5 K5 H5 C6 K6 H6 C7 K7 H7 K8 H8 G8 F8 E8 D8 C8 K9 K10 J10 H10G10 F10E10D10 C10B10 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10

R811 C806

FB804 FB803 FB802 FB811
LCD801 LIQUID CRYSTAL DISPLAY

R638 R640

FB815 FB808

R808 R809

R807 B2 B1 A2 A1

C707 C706

FB816 FB814 FB812

C3 C2 C1 B3 B1 A3 A2 A1

FB810 FB809 FB807 FB818 FB817 CL623

CL613 (FR) C209

2E 2B 1C

2C R206 1B 1E 10 R106

C678 C691

C662 R310

FB813 C306

1 R908 R911 R921 C318

5 R306 C315 G C312 C314 C313 C106

R630 R312

R J301 (HEADPHONE) G R L

R923 R907 C1

C203 C103

CL903 D101

Q903 R919

C302 C104

C301 C205 C105

C206 R102 R202 C102 C202

VDR301

C908 CL904 C910

R110 FB101

HP FLEXIBLE BOARD

S602 HOLD ON

CL905 R912 C904

1-871-811- (11)

2E 2B 1C (FR) R111 C210

2C 1B 1E

R205 9

R314 R315

C708 C705 B C E

Q301 Q302 Q303 Q304 Q903
Note: When IC301, IC302, IC602, IC802, IC803 and IC901 cannot exchange with single. When IC301, IC302, IC602, IC802, IC803 and IC901 are damaged, exchange the entire mounted board.

IC505, 506 TC7WG74FC

CK D XQ GND 9

VCC XPR

ON / OFF CONTROL

10 NO2

REGULATOR

VOLTAGE REFERENCE

VCONT GND NC

D R XCLR Q

COM1 3

VIN 2 VOLTAGE REFERENCE

NCIN1 5

VOUT 3
REGULATOR 1 ENON / OFF CONTROL 7

IC501 S1R72V17B00A20B

NC VSS VSS VSS VSS VSS VSS CVDD LVDD LVDD LVDD LVDD HVDD HVDD HVDD

VCCA A1

A1 G7 B7 B6 B5 B4 B2 D7 G2 C7 A7 A2 C2 B3 A5

A2 VCCB B2 DIR

XI B8 XO C8
OSCILLATOR USB FIRST-IN FIRST-OUT

GND B1

TESTEN H1 ATPGEN H8 BURNIN A8

TEST MUX

USB FIRST-IN FIRST-OUT CONTROLLER
DEVICE SERIAL INTERFACE ENGINE R1 A6 DP A3 DM A4 VBUSFLG B1 VBUSEN C1 VBUS C3 XRESET D1 CLKIN D8 XRD G3 XWRL H3 F3
CPU INTERFACE CONTROLLER CHANNEL /ENDPOINT DMA CONTROLLER

C6 E8 D6 F8 E7 F7 G8 H7

CD15 CD14 CD13 CD12 CD11 CD10 CD9 CD8
MULTI TRANSCELVER MACRO HOST SERIAL INTERFACE ENGINE

F6 G6 H6 E6 F5 H5 G5

CD7 CD6 CD5 CD4 CD3 CD2 CD1

IC802 BD6069GUT-E2

GND SW

H2 E3 G4 F4

XCS XINT XDREQ XDACK

C4 E1 C5 E2 D3 G1 F1 F2

CA1 CA2 CA3 CA4 CA5 CA6 CA7 CA8

C2 DRIVER C1 VOUT

GNDA A1

IC503, 602 TK63731AB1G0B

OVER VOLTAGE PROTECT

CONTROL

SHORT PROTECT
A2 B2 VIN THERMAL & OVER CURRENT PROTECTION REGULATOR CURRENT SENSE ERROR AMP B3 VFB OSCILLATOR THERMAL SHUTDOWN PWM COMPARATOR ON / OFF CONTROL VOLTAGE REFERENCE

GND A1 B1 A3

IC901 MAX8677AETG
/UOK /DOK /CHG GND /FLT SYS SYS SYSTEM LOAD SWITCH LITHIUM BATTERY CHARGER

/DONE 1 DC 2 DC 3

CURRENT-LIMITED VOLTAGE REGULATOR

INPUT VOLTAGE MONITOR

/CEN 4 PENPENINPUT LIMITER & CHARGER THERMAL REGULATION

BAT BAT USB USB TSET

CURRENT SETTING
13 USUSS 7 PSET VL GND 12 CT ISET THM

IC903 MAX1557ETB

IN 1 GND 2
0.675V BIAS CURRENT SENSE REFERENCE 1.25V SLOPE COMPARATOR PWM COMPARATOR CURRENT-LIMIT COMPARATOR
OUTPUT VOLTAGE SELECTOR SHORT-CIRCUIT PROTECTION

PWM AUTO SKIP CONTROL

9 INP DRIVER

ERROR AMPLIFIER

M1 to M5, SDR_DATA18 to M8 SDR_DATA13 M9 M10, M17, M18 M19 M22 to M25 M26 N1 to N5, N8 N9, N10, N17 to N19 NAND_CEZ0 GND LCD_B0 LCD_G0 to LCD_G3 NC SDR_DATA12 to SDR_DATA7 GND

O O I I/O O I/O O O

Ground terminal Video signal (G) output to the level shift Video signal (R) output to the level shift Power supply voltage input terminal Serial data input/output with the 256Mbit SD-RAM Write mask signal output to the 256Mbit SD-RAM Serial data input/output with the 256Mbit SD-RAM Ground terminal Reset signal output to the USB controller Ground terminal Video signal (R) output to the level shift
N22, N23 LCD_G4, LCD_G5 N24, N25 LCD_R0, LCD_R1 N26 P1 to P4 P5 P8 P9 P10 P17 to P19 P22 VMICIN SDR_DATA5 to SDR_DATA2 SDR_DQM0 SDR_DATA6 GND RESETZ GND LCD_R3
Pin No. P23 P24 P25, P26 R1 R2 to R4 R5 R8 R9 R10 R17 R18 R19 R24 R25 R26 T1 T2 T3 T4 T5 T8 T9 T10 T17 T18 T19 T22 T23 T24 T25 T26 U1 to U5 U8 U9 U10 to U12 U13 U14 U15 U16 U17 U18 U19 U22 U23
Pin Name LCD_PXCLK NC IO_A SDR_DATA0 SDR_DQM3 to SDR_DQM1 SDR_WEZ SDR_DATA1 GND NC U70_CTSZ U70_RTSZ GND GNDSINK VDD_L0 NC SDR_CKE0 NC SDR_CSZ0 SDR_BA1 SDR_RASZ NC GND NC U70_SOUT U70_SRIN GND LCD_R5 NC C_TMS VLOG CKO SDR_A12 to SDR_A8 SDR_CASZ GND NC WAKEUP NC L1_DET

ERR_RST_REQZ

I/O O I/O O O I/O O O O O O O I O I O O O O O O O I Clock signal output to the level shift Not used Not used
Serial data input/output with the 256Mbit SD-RAM Write mask signal output to the 256Mbit SD-RAM Write enable signal output to the 256Mbit SD-RAM Serial data input/output with the 256Mbit SD-RAM Ground terminal Not used Not used Not used Ground terminal Video signal (R) output to the level shift Ground terminal Power supply terminal Not used Clock enable signal output to the 256Mbit SD-RAM Not used Chip select signal output to the 256Mbit SD-RAM Bank address signal output to the 256Mbit SD-RAM Row address strobe signal output to the 256Mbit SD-RAM Not used Ground terminal Not used Serial data output to the WM-port Serial data input from the WM-port Ground terminal Video signal (R) output to the level shift Not used MS signal input terminal for JTAG Not used Power supply output terminal Main system clock output terminal (11.2896MHz) Address signal output to the 256Mbit SD-RAM Column address strobe signal output to the 256Mbit SD-RAM Ground terminal Not used Wake up signal output terminal Not used Not used Not used Not used Master clock signal output to the D/A converter Not used Data output terminal for JTAG Not used Power supply voltage input terminal

MAIN BOARD, NAND BOARD SECTION (NW-A805/A806/A808)
Note: The illustration sees the set from the rear.

not supplied

not supplied not supplied

108 112

(NW-A805/A806)

106 111

front cabinet section
Note: When the MAIN board is replaced, format it according to the NOTE OF MAIN BOARD REPLACING (refer to page 4) of the servicing notes. Ref. No. Part No. X-2149-671-1 2-889-236-01 2-889-239-01 2-889-229-01 2-897-318-01 Description DOOR ASSY, CONNECTOR SPRING (DOOR) CONNECTOR, HOLDER SHEET (NAND) SPACER (NAND) (NW-A805/A806) Remark

Ref. No. 107

3-234-449-11 SCREW (M1.4) X-2177-781-1 NAND BOARD, COMPLETE (2GB) (for SERVICE) (NW-A805: CND) X-2177-782-1 NAND BOARD, COMPLETE (4GB) (for SERVICE) (NW-A806: CND) X-2177-783-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NW-A808: CND) X-2177-784-1 NAND BOARD, COMPLETE (2GB) (for SERVICE) (NW-A805: AEP, UK, EE) X-2177-785-1 NAND BOARD, COMPLETE (4GB) (for SERVICE) (NW-A806: AEP, UK, EE) X-2177-786-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NW-A808: AEP, UK, EE) X-2177-787-1 NAND BOARD, COMPLETE (2GB) (for SERVICE) (NW-A805: FR) X-2177-788-1 NAND BOARD, COMPLETE (4GB) (for SERVICE) (NW-A806: FR) X-2177-789-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NW-A808: FR)
X-2177-790-1 NAND BOARD, COMPLETE (2GB) (for SERVICE) (NW-A805: E, MX, AUS, JE) X-2177-791-1 NAND BOARD, COMPLETE (4GB) (for SERVICE) (NW-A806: E, MX, AUS, JE) X-2177-792-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NW-A808: E, MX, AUS, JE) X-2178-909-1 NAND BOARD, COMPLETE (2GB) (for SERVICE) (NW-A805: CH) X-2178-910-1 NAND BOARD, COMPLETE (4GB) (for SERVICE) (NW-A806: CH) X-2178-911-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NW-A808: CH) 3-208-193-01 SPACER (REAR) 2-889-227-01 SHIELD CASE (MAIN) X-2177-776-1 MAIN BOARD, COMPLETE (for SERVICE) (EXCEPT FR) X-2177-777-1 MAIN BOARD, COMPLETE (for SERVICE) (FR) 2-894-337-01 SHEET (MAIN), INSULATING 2-894-339-01 SHEET (HARNESS) 2-889-228-01 CUSHION (CONNECTOR)

112 113

MAIN BOARD, NAND BOARD SECTION (NWZ-A815/A816/A818)

158 162

(NWZ-A815/A816)

156 161

153 151
Note: When the MAIN board is replaced, format it according to the NOTE OF MAIN BOARD REPLACING (refer to page 4) of the servicing notes. Ref. No. Part No. X-2149-671-1 2-889-236-01 2-889-239-01 2-889-229-01 2-897-318-01 Description DOOR ASSY, CONNECTOR SPRING (DOOR) CONNECTOR, HOLDER SHEET (NAND) SPACER (NAND) (NWZ-A815/A816) Remark Ref. No. 157 Part No. Description Remark
X-2179-977-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NWZ-A818: US) X-2179-978-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NWZ-A818: FR) X-2179-979-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NWZ-A818: CND, AEP, UK, EE, NZ, HK, SP, AUS) X-2187-874-1 NAND BOARD, COMPLETE (4GB) (for SERVICE) (NWZ-A816: US (BestBuy)) 3-208-193-01 SPACER (REAR) 2-889-227-01 SHIELD CASE (MAIN) X-2177-776-1 MAIN BOARD, COMPLETE (for SERVICE) (EXCEPT FR) X-2177-777-1 MAIN BOARD, COMPLETE (for SERVICE) (FR) 2-894-337-01 SHEET (MAIN), INSULATING 2-894-339-01 SHEET (HARNESS) 2-889-228-01 CUSHION (CONNECTOR)

1-112-716-11 CERAMIC CHIP 1-112-716-11 CERAMIC CHIP 1-112-716-11 1-112-716-11 1-112-716-11 1-112-716-11 1-112-716-11 1-112-717-91 1-112-717-91 1-112-716-11 1-112-716-11 1-112-716-11 1-112-716-11 1-112-716-11 1-112-716-11 1-112-717-91 1-112-717-91 1-112-717-91 1-112-717-91 1-112-717-91 1-112-717-91 1-112-717-91 1-112-717-91 1-112-717-91 1-112-716-11 1-128-627-91 1-112-716-11 1-112-716-11 1-112-717-91 1-112-716-11 1-112-716-11 1-112-716-11 1-112-716-11 1-164-935-11 1-112-716-11 1-112-717-91 1-164-935-11 1-117-746-81 1-117-746-81 1-164-935-11 1-112-717-91 1-164-943-81 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
1-164-856-81 CERAMIC CHIP 1-164-854-11 CERAMIC CHIP 1-100-352-91 CERAMIC CHIP
1-100-352-91 CERAMIC CHIP
Note: When the MAIN board is replaced, format it according to the NOTE OF MAIN BOARD REPLACING (refer to page 3) of the servicing notes.
Ref. No. C633 C634 C638 C640 C641 C643 C644 C645 C646 C647 C648 C649 C650 C651 C652 C653 C654 C655 C656 C657 C660 C661 C662 C664 C665 C666 C667 C668 C669 C670 C671 C672 C673 C674 C675 C676 C677 C678 C679 C680 C681 C682 C683 C684 C685 C686 C687 C688 C689 C690 C691 C692 C694 C695 C697 C698 C701 C702 Part No. 1-112-716-11 1-112-716-11 1-112-717-91 1-112-717-91 1-100-611-91 1-112-717-91 1-100-611-91 1-112-716-11 1-112-716-11 1-128-627-91 1-112-716-11 1-128-627-91 1-128-627-91 1-112-716-11 1-112-716-11 1-128-627-91 1-112-716-11 1-128-627-91 1-112-716-11 1-128-627-91 1-128-627-91 1-112-716-11 1-164-937-11 1-112-716-11 1-128-627-91 1-112-716-11 1-128-627-91 1-117-743-81 1-117-743-81 1-128-627-91 1-128-627-91 1-128-627-91 1-112-716-11 1-112-716-11 1-112-716-11 1-128-627-91 1-128-627-91 1-128-627-91 1-112-716-11 1-112-716-11 1-112-716-11 1-128-627-91 1-112-716-11 1-128-627-91 1-128-627-91 1-128-627-91 1-112-716-11 1-112-716-11 1-119-923-11 1-112-716-11 1-128-627-91 1-128-627-91 1-112-716-11 1-112-716-11 1-128-627-91 1-112-716-11 1-112-716-11 1-128-622-91 Description CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 1uF 1uF 22uF 1uF 22uF 0.1uF 0.1uF 0.001uF 0.1uF 0.001uF 0.001uF 0.1uF 0.1uF 0.001uF 0.1uF 0.001uF 0.1uF 0.001uF 0.001uF 0.1uF 0.001uF 0.1uF 0.001uF 0.1uF 0.001uF 5PF 5PF 0.001uF 0.001uF 0.001uF 0.1uF 0.1uF 0.1uF 0.001uF 0.001uF 0.001uF 0.1uF 0.1uF 0.1uF 0.001uF 0.1uF 0.001uF 0.001uF 0.001uF 0.1uF 0.1uF 0.047uF 0.1uF 0.001uF 0.001uF 0.1uF 0.1uF 0.001uF 0.1uF 0.1uF 100PF 10% 10% 10% 10% 20% 10% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 0.1PF 0.1PF 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% Remark 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 6.3V 16V 6.3V 16V 16V 6.3V 6.3V 16V 6.3V 16V 6.3V 16V 16V 6.3V 50V 6.3V 16V 6.3V 16V 16V 16V 16V 16V 16V 6.3V 6.3V 6.3V 16V 16V 16V 6.3V 6.3V 6.3V 16V 6.3V 16V 16V 16V 6.3V 6.3V 10V 6.3V 16V 16V 6.3V 6.3V 16V 6.3V 6.3V 16V Ref. No. C703 C704 C705 C706 C707 C708 C709 C710 C711 C712 C713 C714 C802 C804 C806 C807 C808 C810 C811 C812 C813 C853 C901 C902 C903 C904 C905 C906 C907 C908 C909 C910 C911 C912 C913 C915 C917 C920 C921 Part No. Description 0.1uF 100PF 0.1uF 100PF 0.1uF 100PF 0.1uF 100PF 0.1uF 100PF 0.1uF 100PF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 1uF 0.1uF 0.1uF 0.1uF 100PF 10uF 0.1uF 0.1uF 0.1uF 0.068uF 0.1uF 22uF 0.1uF 22uF 0.1uF 0.001uF 22uF 22uF 22uF 22uF 4.7uF 22uF 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% 10% 10% 10% 10% 10% 20% 10% 20% 20% 10% 20% 20% 20% 20% 20% 20% Remark 6.3V 16V 6.3V 16V 6.3V 16V 6.3V 16V 6.3V 16V 6.3V 16V 6.3V 6.3V 6.3V 6.3V 6.3V 25V 25V 25V 6.3V 50V 10V 10V 6.3V 6.3V 10V 6.3V 6.3V 6.3V 6.3V 16V 50V 6.3V 6.3V 6.3V 6.3V 16V 6.3V

X-2177-781-1 NAND BOARD, COMPLETE (2GB) (for SERVICE) (NW-A805: CND) X-2177-782-1 NAND BOARD, COMPLETE (4GB) (for SERVICE) (NW-A806: CND) X-2177-783-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NW-A808: CND) X-2177-784-1 NAND BOARD, COMPLETE (2GB) (for SERVICE) (NW-A805: AEP, UK, EE) X-2177-785-1 NAND BOARD, COMPLETE (4GB) (for SERVICE) (NW-A806: AEP, UK, EE) X-2177-786-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NW-A808: AEP, UK, EE) X-2177-787-1 NAND BOARD, COMPLETE (2GB) (for SERVICE) (NW-A805: FR) X-2177-788-1 NAND BOARD, COMPLETE (4GB) (for SERVICE) (NW-A806: FR) X-2177-789-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NW-A808: FR) X-2177-790-1 NAND BOARD, COMPLETE (2GB) (for SERVICE) (NW-A805: E, MX, AUS, JE) X-2177-791-1 NAND BOARD, COMPLETE (4GB) (for SERVICE) (NW-A806: E, MX, AUS, JE) X-2177-792-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NW-A808: E, MX, AUS, JE) X-2178-909-1 NAND BOARD, COMPLETE (2GB) (for SERVICE) (NW-A805: CH) X-2178-910-1 NAND BOARD, COMPLETE (4GB) (for SERVICE) (NW-A806: CH) X-2178-911-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NW-A808: CH) X-2179-971-1 NAND BOARD, COMPLETE (2GB) (for SERVICE) (NWZ-A815: US) X-2179-972-1 NAND BOARD, COMPLETE (2GB) (for SERVICE) (NWZ-A815: FR) X-2179-973-1 NAND BOARD, COMPLETE (2GB) (for SERVICE) (NWZ-A815: CND, AEP, UK, EE, NZ, HK, SP, AUS) X-2179-974-1 NAND BOARD, COMPLETE (4GB) (for SERVICE) (NWZ-A816: US, US (CircuitCity)) X-2179-975-1 NAND BOARD, COMPLETE (4GB) (for SERVICE) (NWZ-A816: FR) X-2179-976-1 NAND BOARD, COMPLETE (4GB) (for SERVICE) (NWZ-A816: CND, AEP, UK, EE, NZ, HK, SP, AUS) X-2179-977-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NWZ-A818: US) X-2179-978-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NWZ-A818: FR) X-2179-979-1 NAND BOARD, COMPLETE (8GB) (for SERVICE) (NWZ-A818: CND, AEP, UK, EE, NZ, HK, SP, AUS) X-2187-874-1 NAND BOARD, COMPLETE (4GB) (for SERVICE) (NWZ-A816: US (BestBuy)) ********************* When NAND board is defective, exchange the entire mounted board. ************************************************************
3-270-643-32 MANUAL (QSG), INSTRUCTION (Quick Start Guide) (GERMAN) (NWZ-A815: CND, AEP, UK, NZ, HK, SP, AUS/ A816: CND, AEP, UK, NZ, HK, SP, AUS/ A818: CND, AEP, UK, NZ, HK, SP, AUS) 3-270-643-42 MANUAL (QSG), INSTRUCTION (Quick Start Guide) (SPANISH) (NWZ-A815: CND, AEP, UK, NZ, HK, SP, AUS/ A816: CND, AEP, UK, NZ, HK, SP, AUS/ A818: CND, AEP, UK, NZ, HK, SP, AUS) 3-270-643-52 MANUAL (QSG), INSTRUCTION (Quick Start Guide) (ITALIAN) (NWZ-A815: CND, AEP, UK, NZ, HK, SP, AUS/ A816: CND, AEP, UK, NZ, HK, SP, AUS/ A818: CND, AEP, UK, NZ, HK, SP, AUS) 3-270-643-62 MANUAL (QSG), INSTRUCTION (Quick Start Guide) (RUSSIAN) (NWZ-A815: EE/A816: EE/A818: EE) 3-270-643-72 MANUAL (QSG), INSTRUCTION (Quick Start Guide) (UKRAINIAN) (NWZ-A815: EE/A816: EE/A818: EE) 3-272-845-11 PIECE (S), EAR (Earbud) (Size S) (GRAY) (for White Headphones) 3-272-845-21 PIECE (S), EAR (Earbud) (Size S) (CLEAR BLACK) (for Black Headphones) 3-272-846-11 PIECE (M), EAR (Earbud) (Size M) (GRAY) (for White Headphones) 3-272-846-21 PIECE (M), EAR (Earbud) (Size M) (CLEAR BLACK) (for Black Headphones) 3-272-847-11 PIECE (L), EAR (Earbud) (Size L) (GRAY) (for White Headphones) 3-272-847-21 PIECE (L), EAR (Earbud) (Size L) (CLEAR BLACK) (for Black Headphones) 3-293-628-11 MANUAL (QSG), INSTRUCTION (Quick Start Guide) (ENGLISH) (for BestBuy) (NWZ-A816: US) 8-912-759-90 RECEIVER (MDR-EX082/BC9 SET) (BLACK) (Headphones) (including Earbuds: size S/M/L) (for BLACK, SILVER, VIOLET, BLUE of Except US model) 8-912-759-92 RECEIVER (MDR-EX082SPW9 SET) (WHITE) (Headphones) (including Earbuds: size S/M/L) (for WHITE, PINK of Except US model) 8-912-765-90 RECEIVER (MDR-EX082SBQ9 SET) (BLACK) (Headphones) (including Earbuds: size S/M/L) (for BLACK, SILVER, VIOLET, BLUE of US model) 8-912-766-90 RECEIVER (MDR-EX082SWQ9 SET) (WHITE) (Headphones) (including Earbuds: size S/M/L) (for WHITE, PINK of US model) X-2178-385-2 CD-ROM ASSY (RUSSIA HELP) (for SonicStage, Image Converter of Russsian Help) (NW-A805: EE/A806: EE/A808: EE) X-2178-869-5 SOFT ASSY, APPLICATION (CD-ROM: SonicStage software, Image Converter software, Oparation Guide (PDF file)) (NW-A805/A806/A808) X-2179-903-2 SOFT ASSY, APPLICATION (CD-ROM: MP3 Conversion Tool, Windows Media Player 11, Operation Guide (PDF file)) (NWZ-A815: US/A816: US/A818: US)