Merci d'avoir choisi Humminbird, le chef de file dans le secteur des sondeurs de poissons aux tats-Unis. Humminbird a bti sa rputation en crant et en fabriquant des quipements marins de haute qualit et trs fiables. Votre appareil Humminbird a t conu pour pouvoir tre utilis sans problmes, quelles que soient les conditions, mme dans les milieux marins les plus hostiles. Dans l'ventualit peu probable o votre appareil Humminbird aurait besoin de rparations, nous offrons une garantie pices et main d'uvre exclusive - gratuite pendant la premire anne, et disponible un taux raisonnable aprs la priode initiale d'un an. Pour plus de dtails, voir le bon de garantie de votre modle. Nous vous invitons lire attentivement ce Manuel de l'utilisateur, afin de profiter pleinement de toutes les fonctions et applications de votre produit Humminbird.
ENVIRONMENTAL COMPLIANCE STATEMENT: It is the intention of Humminbird to be a responsible corporate citizen, operating in compliance with known and applicable environmental regulations, and a good neighbor in the communities where we make or sell our products. To obtain a list of authorized international distributors, please visit our web site at www.humminbird.com or contact our Customer Resource Center at (334) 687-6613.
WEEE DIRECTIVE: EU Directive 2002/96/EC Waste of Electrical and Electronic Equipment Directive (WEEE) impacts most distributors, sellers, and manufacturers of consumer electronics in the European Union. The WEEE Directive requires the producer of consumer electronics to take responsibility for the management of waste from their products to achieve environmentally responsible disposal during the product life cycle. WEEE compliance may not be required in your location for electrical & electronic equipment (EEE), nor may it be required for EEE designed and intended as fixed or temporary installation in transportation vehicles such as automobiles, aircraft, and boats. In some European Union member states, these vehicles are considered outside of the scope of the Directive, and EEE for those applications can be considered excluded from the WEEE Directive requirement. This symbol (WEEE wheelie bin) on product indicates the product must not be disposed of with other household refuse. It must be disposed of and collected for recycling and recovery of waste EEE. Humminbird will mark all EEE products in accordance with the WEEE Directive. It is our goal to comply in the collection, treatment, recovery, and environmentally sound disposal of those products; however, these requirements do vary within European Union member states. For more information about where you should dispose of your waste equipment for recycling and recovery and/or your European Union member state requirements, please contact your dealer or distributor from which your product was purchased. ROHS STATEMENT: Product designed and intended as a fixed installation or part of a system in a vessel may be considered beyond the scope of Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Humminbird, DualBeam PLUS, SmartCast, Selective Fish ID+, WhiteLine, QuadraBeam PLUS, RTS, X-Press Menu, Fish ID+, WideSide, Structure ID, TrueArch, UltraBlack, Angler Profile Presets, and WeatherSense are trademarked by or registered trademarks of Humminbird. 2008 Humminbird, Eufaula AL, USA. All rights reserved.

Table of Contents

How Sonar Works 1
Single Beam Sonar. 3 Dualbeam Sonar (565 Fishfinders only). 3 QuadraBeam PLUS Sonar (575 Fishfinders only). 4
Whats On the Display Views Sonar View
Understanding Sonar History. 9 Real Time Sonar (RTS) Window. 9 Bottom Presentation. 10 Sonar Zoom View. 13 200/83 kHz Split Sonar View (575 Fishfinders only). 14 Big Digits View. 15 Side Beam View (575 Fishfinders only). 16

Key Functions

POWER/LIGHT Key. VIEW Key. MENU Key. 4-WAY Cursor Control Key. EXIT Key.
Powering Up the Unit The Menu System

Start-Up Options Menu

Normal Operation. Simulator. System Status. Self Test. Accessory Test.

Sonar X-Press Menu

Sensitivity. 29 Upper Range (Advanced; Sonar, Split Sonar, Big Digits Views only). 30 Lower Range. 31 Chart Speed. 32 Bottom View. 33 Quad Layout (575 Fishfinders only, Side Beam View only). 34 Zoom Level (Sonar Zoom View only). 34

Sonar Menu Tab

Beam Select (575 Fishfinders only). 36 Fish ID+. 37 Fish ID Sensitivity. 38 Real Time Sonar (RTS) Window. 38 Zoom Width. kHz Sensitivity (Advanced; 575 Fishfinders only). kHz Balance (Advanced; 575 Fishfinders only). 40 Depth Lines (Advanced). 41 Surface Clutter (Advanced). 42 Noise Filter (Advanced). 43 Max Depth (Advanced). 43 Water Type (Advanced). 44

Alarms Menu Tab

Depth Alarm. Fish ID Alarm. Low Battery Alarm. Temp Alarm. Alarm Tone.

Setup Menu Tab

Units - Depth. 50 Units - Temp (International only). 50 Units - Distance (with Temp/Speed only). 50 Units - Speed (with Temp/Speed only). 51 User Mode. 51 Language (International only). 51 Triplog Reset (with Temp/Speed only). 52 Restore Defaults. 52 Select Views (Advanced). 53 Select Readouts (Advanced; Sonar View only). 54 Depth Offset (Advanced). 55 Temp Offset (Advanced). 56 Speed Calibration (Advanced; with Temp/Speed only). 56

Troubleshooting

500 Series Doesnt Power Up. 500 Series Defaults to Simulator with a Transducer Attached. Display Problems. Finding the Cause of Noise.
500 Series Fishfinder Accessories Specifications Glossary Contact Humminbird 62 79
NOTE: Entries in this Table of Contents which list (International Only) are only available on products sold outside of the U.S. by our authorized international distributors. To obtain a list of authorized international distributors, please visit our web site at www.humminbird.com or contact our Customer Resource Center at (334) 687-6613. NOTE: Entries in this Table of Contents which list (with Temp/Speed only) require the purchase of a separate accessory. You can visit our website at www.humminbird.com to order these accessories online or contact our Customer Resource Center at 1-800-633-1468. NOTE: Not all features discussed in this manual are available on all models. Every effort has been made to identify those features that are unique to specific models only, and to identify which models support those features. Please read the manual carefully in order to understand the full capabilities of your model.

Single Beam Sonar

Your Humminbird 515, 525 or 535 Fishfinder uses a 200 kHz single beam sonar system with a 20 area of coverage. Depth capability is affected by such factors as boat speed, wave action, bottom hardness, water conditions and transducer installation.

DualBeam Sonar

(565 Fishfinders only)
Your Humminbird Fishfinder 565 uses a 200/83 kHz Dual Beam sonar system with a wide (60) area of coverage. DualBeam sonar is optimized to show the greatest bottom definition using a narrow (20) beam yet can still indicate fish found in the wide (60) beam when the Fish ID+ feature is turned on. DualBeam is ideal for a wide range of conditions - from shallow to very deep water in both fresh and salt water. Depth capability is affected by such factors as boat speed, wave action, bottom hardness, water conditions and transducer installation.
NOTE: It's important to note that your 565 Fishfinder is a DualBeam-only unit and should not be confused with the DualBeam PLUS functionality of the 575 Fishfinder. DualBeam will only show hollow fish symbols from the wide 83 kHz beam when Fish ID+ is turned on. You cannot view the 83k Hz sonar information separately from the 200 kHz sonar information as you can in a DualBeam Plus 575 Fishfinder unit.

QuadraBeam PLUS Sonar

(575 Fishfinders only)

455 kHz

200 kHz

83 kHz

90 Total Coverage Bottom Coverage = 2 x Depth
Your Humminbird 575 Fishfinder supports QuadraBeam PLUS sonar. QuadraBeam PLUS sonar provides an extremely wide 90 area of coverage. QuadraBeam PLUS starts with two fan-shaped kHz Side Structure locating sonar beams to spot fish, bait and structure to the left and right of the boat over an area of the bottom thats always equal to twice your depth. QuadraBeam PLUS finds more fish faster, and can even tell you where to put your bait by showing if fish are to the left, right or directly beneath your boat.
For structure directly below your boat, Quadrabeam PLUS uses a DualBeam PLUS 200/83 kHz sonar system with a wide (60) area of coverage. DualBeam PLUS sonar has a narrowly focused 20 center beam, surrounded by a second beam of 60, expanding your coverage to an area equal to your depth. In 20 feet of water, the wider beam covers an area 20 feet wide. The 20 center beam is focused on the bottom, to show you structure, weeds and cover. The 60 wide beam is hunting for fish in the wide coverage area. DualBeam PLUS sonar returns can be blended together, viewed separately or compared side-by-side. DualBeam PLUS is ideal for a wide range of conditions - from shallow to very deep water in both fresh and salt water. Depth capability is affected by such factors as boat speed, wave action, bottom hardness, water conditions and transducer installation.

Sonar View is the default view. When the VIEW key is pressed, the display cycles through the available views. When the EXIT key is pressed, the display cycles through the available views in reverse order. Any view can be hidden or displayed as part of the view rotation using the Views Menu tab.

Sonar View

Sonar View presents a historical log of sonar returns. Depth is always displayed. Readouts for temperature and speed are automatically displayed if the appropriate accessory is connected. The most recent sonar returns are charted on the right side of the window; as new information is received, the older information is moved across the display to the left. A Digital Depth Readout is displayed in the upper left corner. A scale with Upper and Lower Depth Range readouts appears along the right edge of the Sonar View. The scale indicates the distance from the surface of the water to a depth range sufficient to show the bottom. Depth Range is automatically selected to keep the bottom visible on the display, although you can adjust it manually as well (see Sonar X-Press Menu). Six additional Digital Readouts display information from optional-purchase accessories. These information boxes can be customized to show only the information desired (see Setup Menu Tab, Select Readouts).
Depth Temperature Triplog Upper Depth Range RTS Window

Sonar History Window

Lower Depth Range
NOTE: If the Depth number is flashing, it means that the unit is having trouble locating the bottom. This usually happens if the water is too deep, the transducer is out of the water, the boat is moving too fast, or for any other reason that the unit cant accurately receive continuous data.
Understanding Sonar History
It is important to understand the significance of the display. The display does NOT show a literal 3-dimensional representation of what is under the water. Each vertical band of data received by the control head and plotted on the display represents something that was detected by a sonar return at a particular time. As both the boat and the targets (fish) may be moving, the returns are only showing a particular segment of time when objects were detected, not exactly where those objects are in relation to other objects shown on the display.
Real Time Sonar (RTS) Window
A Real Time Sonar (RTS) Window appears on the right side of the display in the Sonar View only. The RTS Window always updates at the fastest rate possible for depth conditions and shows only the returns from the bottom, structure and fish that are within the transducer beam. The RTS Window plots the depth and intensity of a sonar return (see Sonar Menu - RTS Window).

Depth Upper Depth Range, Full Range View Upper Depth Range, Zoom View Full Range View Zoomed View Zoom Preview Box Lower Depth Range, Zoom View Zoom Level Lower Depth Range, Full Range View
200/83 kHz Split Sonar View
Split Sonar View displays sonar returns from the 83 kHz wide beam on the left side of the screen and displays sonar returns from the 200 kHz narrow beam on the right side of the screen and is only available on the 575 Fishfinder. Depth is always displayed in the upper left hand corner. You can use the Split Sonar View to make side by side comparisons between the sonar returns from the 83 kHz wide beam and the 200 kHz narrow beam. The digital readouts in the Split Sonar View cannot be customized; therefore, information such as water temperature and voltage are unavailable in the Split Sonar View.

Depth Upper Depth Range

200 kHz Sonar History Window 83 kHz Sonar History Window

Big Digits View

Big Digits View provides digital data in a large, easy-to-see format. Depth is always displayed. Readouts for temperature, speed and Triplog information are displayed automatically if the appropriate accessory is connected to the system. The Triplog shows distance traveled, average speed, and time elapsed since the Triplog was last reset. The digital readouts in the Big Digits View cannot be customized.
Depth Timer shows the time elapsed since Triplog was last reset. Distance is the distance traveled since the Triplog was last reset. Voltage displays the battery voltage. Average Speed shows the speed since the Triplog was last reset.

Temperature

Side Beam View
Side Beam View shows sonar information from both the left and right 455 kHz beams and the 200 kHz down-looking beam in one view and is only available on the 575 Fishfinder. You can customize the way the sonar data is displayed in the Side Beam View to suit your personal preferences. Depending on the layout selected from the Quad Layout Sonar X-Press menu (only available on the Sonar X-Press menu when in Side Beam View), the display will represent the same sonar data in one of the following three layouts: Default layout: The top portion of the display presents a historical log of sonar returns from the 200 kHz down-looking sonar beam. New information in the down beam panel scrolls from right to left. The bottom portion of the display presents a historical log of sonar returns from the 455 kHz right- and left-looking sonar beams. New information in the side beam panels scrolls from the center out.
Depth 200 kHz Sonar History Window Temperature

Left Side 455 kHz Sonar History Window
Right Side 455 kHz Sonar History Window Water Surface Line for 455 kHz Sonar History Windows
Classic layout: The top portion of the display presents a historical log of sonar returns from the 200 kHz down-looking sonar beam. The bottom portion of the display presents a historical log of sonar returns from the 455 kHz right- and left-looking sonar beams. New information appears at the top, and scrolls down the display.
200 kHz Sonar History Window
Slanted layout: This layout presents the two 455 kHz side sonar beams and the 200 kHz down-looking sonar beam as three panels of historical data. This layout is presented as three slanted panels. New information appears on the right, and scrolls to the left.
Right Side 455 kHz Sonar History Window
In all of these layouts, the sonar information from the side-looking beams reveals bottom contour, structure and fish similar to the down-looking beam, but the area covered is to the left and right of the area shown in the downlooking portion, so you actually see more of the bottom. The distance covered by the right and left beams is based on the depth setting for the down-looking beam, up to a maximum of 160 feet.
Your Fishfinder user interface consists of a set of easy-to-use keys that work with various on-screen views and menus to give you flexibility and control over your fishing experience.

POWER/LIGHT Key

The POWER/LIGHT key is used to turn the Fishfinder on and off, and also to adjust the backlight and contrast of the display. Press the POWER/LIGHT key to turn the unit on. The Title screen is then displayed until the Fishfinder begins sonar operation. Your Fishfinder will start up with the backlight on and will automatically turn it off to conserve power. To turn the backlight on for night fishing, or to adjust the display contrast, press the POWER/LIGHT key to access the Light and Contrast menu. Use the 4-WAY Cursor key to select Light or Contrast and then use the LEFT or RIGHT Cursor key to change the settings. Press EXIT to exit the Light and Contrast menu. Press and hold the POWER/LIGHT key for 3 seconds to turn the unit off. A message will appear telling you how many seconds there are until shutdown occurs. Your Fishfinder should always be turned off using the POWER/LIGHT key. This will ensure that shutdown occurs properly and any menu settings will be saved.

NOTE: The X-Press Menu choices will vary depending on which view is active when you press the MENU key, as well as whether you are in Normal or Advanced User Mode.
Main Menu Tabs - Less frequently-adjusted menus are grouped into the Main Menu System. The Main Menu system is organized under the following tab headings to help you find a specific menu item quickly: Alarms, Sonar, and Setup. Press the MENU key twice for the Main Menu, then use the 4-WAY Cursor LEFT or RIGHT key to select a tab, and use the DOWN or UP key to Main Menu System select a specific menu item under that tab, then Normal User Mode use the LEFT or RIGHT keys again to change a menu setting. Press the EXIT key to move quickly to the top of the tab. A down arrow at the bottom of a menu means that you can scroll to additional menu choices using the DOWN Cursor key. A right or left arrow on a menu choice means that you can use the RIGHT or LEFT Cursor keys to make changes or to see more information.
NOTE: The Main Menu choices will vary depending on whether you are in Normal or Advanced User Mode.
User Mode (Normal or Advanced) - An Advanced Mode is provided for users who desire the highest level of control over the Fishfinder and Normal Mode for users who desire greater simplicity and fewer menu choices. Additional Advanced menu choices will be displayed throughout the menu system when you navigate to specific menus while in Advanced Mode. Any changes made while in Advanced Mode will remain in effect after you switch back to Normal Mode. See Setup Menu Tab: User Mode for specific instructions on changing to Advanced User Mode.

Sonar Tab, Normal Mode

Sonar Tab, Advanced Mode
Total Screen Update - when you change any menu settings that affect the Sonar View, the view will update immediately (i.e. you dont have to exit the menu to apply the change to the screen).
Press the MENU key when the Title screen is displayed to access the Start-Up Options menu.
Use the UP or DOWN 4-WAY Cursor keys to position the cursor, then the RIGHT Cursor key to select one of the following choices. If you wait too long, the system will default to whichever menu mode happens to be highlighted: Normal Simulator System Status. See the following paragraphs for more information about each of these choices.

Depth Lines

(Advanced)
Depth Lines divide the display into four equal sections that are separated by three horizontal depth lines. The depth of each line is displayed along the depth scale. You can either turn Depth Lines On or Off. The Depth Lines menu choice is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).
To change the Depth Lines setting: 1. Make sure you are in Advanced User Mode, then highlight Depth Lines on the Sonar main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn the Depth Lines setting On or Off. (Off, On, Default = Off)

Surface Clutter

Surface Clutter adjusts the filter that removes surface clutter noise caused by algae and aeration. The lower the setting, the less surface clutter will be displayed. The Surface Clutter menu choice is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).
To change the Surface Clutter setting: 1. Make sure you are in Advanced User Mode, then highlight Surface Clutter on the Sonar main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Surface Clutter setting. (Low = 1 to High = 10, Default = 5)

Noise Filter

Noise Filter adjusts the sonar Noise Filter to limit interference on the display from sources such as your boat engine, turbulence, or other sonar devices. The Noise Filter menu choice is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).
NOTE: The Off setting removes all filtering; Low, Medium and High1, High2, High3 settings add progressive filtering of the sonar returns. High1, High2 and High3 are useful when there is excessive trolling motor noise, but in some deep water situations, the High settings may actually hinder your units ability to find the bottom.
To change the Noise Filter setting: 1. Make sure you are in Advanced User Mode, then highlight Noise Filter on the Sonar main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Noise Filter setting. (Off, Low, Medium, High1, High2, High3, Default = Low)

Max Depth

Max Depth adjusts the maximum depth of operation. The performance of your Fishfinder can be tuned to the maximum depth you will be fishing in by setting the Max Depth. When a maximum depth is set, your Fishfinder will not attempt to acquire sonar data below that depth, thus increasing overall performance. When Max Depth is set to Auto, the Fishfinder will acquire bottom readings as needed (within the capacity of the unit). If the bottom is deeper than the Max Depth setting, the digital depth readout will flash, indicating that the Fishfinder cannot locate the bottom. The Max Depth menu choice is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode). To change the Max Depth setting: 1. Make sure you are in Advanced User Mode, then highlight Max Depth on the Sonar main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Max Depth setting. (AUTO, 10 to 800 feet, 3 to 260 meters [International Models only], Default = AUTO)

Water Type

Water Type configures your unit for operation in fresh or salt water. The Water Type menu choice is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).
NOTE: In salt water, what would be considered a large fish might be 2 to 10 times bigger than a large fish in fresh water (depending on the type of fish you are seeking). The salt water setting allows for a greater range in fish size adjustment to account for this. Also, make sure that the Water Type is set accurately, especially in salt water, as this affects the accuracy of deep water depth readings.
To change the Water Type setting: 1. Make sure you are in Advanced User Mode, then highlight Water Type on the Sonar main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Water Type setting. (Fresh, Salt, Default = Fresh)
From any view, press the MENU key twice to access the Main Menu System. The Alarms tab will be the default selection.
NOTE: When an alarm is triggered, you can silence it by pressing any key. The alarm will be silenced, and will not be triggered again until a new instance of the alarm condition is detected.

Alarms Menu

Depth Alarm
Depth Alarm sounds when the depth becomes equal to or less than the menu setting. To change the Depth Alarm setting: 1. Highlight Depth Alarm on the Alarms main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Alarm setting. (OFF, 1 to 100 feet, or 0.5 to 30 meters [International Models only], Default = OFF)

Fish ID Alarm

Fish ID Alarm sounds when the Fishfinder detects fish that correspond to the alarm setting. Fish ID Alarm will only sound if Fish ID+ is on.
For example, if you've set the Fish ID Alarm to sound for Large fish only, the Fish ID alarm will sound when a large-sized fish is detected.
To change the Fish ID Alarm setting: 1. Highlight Fish ID Alarm on the Alarms main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Alarm setting. (Off, All, Large/Medium, Large, Default = Off)
Off All Large/Medium Large

Low Battery Alarm

Low Battery Alarm sounds when the input battery voltage is equal to or less than the menu setting. The battery alarm will only sound for the battery that is connected to the Fishfinder. The Low Battery Alarm should be set to warn you when the battery voltage drops below the safety margin that you have determined. For instance, if you are running a trolling motor (battery operated), you would want to set the Low Battery Alarm to sound before the battery voltage drops too low for it to be used to start your main, gasoline-powered engine. To change the Low Battery Alarm setting: 1. Highlight Low Battery Alarm on the Alarms main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Low Battery Alarm setting. (Off, 8.5V - 13.5V, Default = Off)

Temp Alarm

Units - Speed

Units - Speed selects the units of measure for speed-related readouts, and will appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once. To change the Units - Speed setting: 1. Highlight Units - Speed on the Setup menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Speed setting. (kph [International Models only], mph, kts, Default = kph for International models and mph for Domestic models)

User Mode

User Mode sets the menu system to either Normal or Advanced. When set to Normal (default setting,) only the basic menu options are shown. When set to Advanced, additional menu choices are available. To change the User Mode setting: 1. Highlight User Mode on the Setup menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the User Mode setting. (Normal, Advanced, Default = Normal)

Language

Language selects the display language for menus. International Models only. To change the Language setting: 1. Highlight Language on the Setup menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Language setting. (Default = English)

Triplog Reset

Triplog Reset resets the Triplog to zero, and will appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once. The Triplog provides the following information: timer for elapsed time, distance traveled since last reset, and average speed.
NOTE: See Setup Menu Tab: Select Readouts (Advanced) to find out how to display Triplog information on the screen.
To Reset Triplog: 1. Highlight Reset Triplog on the Setup menu. 2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset. 3. The Confirm dialog box will appear. To reset the Triplog, press the RIGHT Cursor key once more. To cancel Reset Triplog, press the LEFT Cursor key.

Restore Defaults

Restore Defaults resets ALL menu settings to their factory defaults. Use this menu choice with caution! To Restore Defaults: 1. Highlight Restore Defaults on the Setup menu. 2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults. 3. The Confirm dialog box will appear. To reset the defaults, press the RIGHT Cursor key once more. To cancel Restore Defaults, press the LEFT Cursor key.

QuadraBeam PLUS: QuadraBeam PLUS is a Humminbird sonar configuration that uses four sonar beams for a more detailed bottom image. QuadraBeam uses the DualBeam PLUS configuration for downlooking, and also adds two additional beams to look to the left and right. The sonar beams pointing to the left and right provide the ability to spot fish and structure over a wide 90 area, and to identify on which side of the boat they are located. See DualBeam PLUS. Quick Disconnect Mount: The Quick Disconnect Mounting system is an exclusive Humminbird feature that permits the unit to be easily removed from the mounting base by pressing a release button, and re-installed by simply snapping it back into place. All cable connections are made when installing, so that no separate wiring connections are required. Additionally, the mount offers 90 tilt and 360 swivel capability to adjust the viewing angle of the unit as you move about the boat. Real Time Sonar: Real Time Sonar is a Humminbird technology that delivers ultra-fast sonar transmitter/receiver operation and results in a more detailed instantaneous view of what is under the boat. The Real Time Sonar window is a vertical band at the right side of the display that shows the instantaneous sonar return from the transducer at a particular instant. The RTS Window menu option permits the user to adjust the window to show the full sonar signal return, or just a narrower band that indicates intensity using grayscale. Real Time Sonar relies on very fast Sonar Update Rate (Ping Speed). See Sonar Update Rate. Receiver: See Transmitter. Second Return: The Second Return is a term that describes the appearance of a second sonar return below the primary sonar return (bottom contour) at exactly twice the true depth. The second return is caused by the same sonar energy bouncing off the bottom once, rebounding to the water surface and then traveling back down to the bottom to be reflected again. Second returns are more common in shallow water and over hard bottoms; it is actually possible to see a third sonar return under some circumstances. The second return provides useful information to help determine bottom hardness, as areas with harder bottoms will generally create a second return. The second return can be used as a guide to set Sensitivity when in shallower water.

Structure: Structure is a general term for objects on the bottom that present a discontinuity and are a likely attractor for fish. This includes bottom contour features (drop-offs, humps, and holes), standing structure (stumps, timbers, brush piles) and a wide range of other potential objects (sunken boats, reefs). Humminbird units excel at showing structure with great detail over a wider area due to unique sonar configurations developed for the angler. Structure ID: Structure ID is a Humminbird feature that describes the traditional grayscale method of presenting sonar information. See Grayscale. Surface Clutter: Surface Clutter is a phenomenon where sonar returns are reflected off of tiny objects near the surface of the water, including algae and even air bubbles. Typically, saltwater environments have significantly greater surface clutter than freshwater due to continuous wind and wave action that causes aeration at the surface. The Surface Clutter menu provides manual control to bias the default settings under extreme conditions. Target Separation: Target Separation is the measurement of minimum distance that a fishfinder needs to be able to recognize two very close objects as two distinct targets (i.e. two fish hanging very close, or a fish hanging very close to structure). Humminbird fishfinders provide a very good 2 1/2 inches of target separation in shallower than 100 feet of depth. Target separation decreases as depth increases due to the need for longer Pulse Width to achieve greater depth. See Pulse Width. Thermoclines: Thermoclines are water layer(s) of distinctly different temperatures that create a sonar reflection due to the density of the differing water temperatures. Typically a thermocline will appear as a continuous band across the display at some distance above the bottom contour. Thermoclines are of interest to anglers because fish will suspend above or below the thermocline as they seek the optimum temperature and oxygen levels. Time Variable Gain: Time Variable Gain is a processing step applied to the sonar return to "normalize" the data so that objects of equal size (i.e. fish) appear to be the same size, even if they are separated by a good distance. Time Variable Gain is a fundamental attribute of good sonar, but is often promoted as a feature. Total Screen Update: A Humminbird feature that refreshes and updates all the sonar information on the display when a range change occurs. Without Total Screen Update, only the most recent sonar information would be drawn to the

Just RAM It!

WWW.RAM-MOUNT.COM

RAM Mount Marine Catalog

Fishing Rod Holders, Tube Holders, GPS Mounts, Chartplotter Mounts, Ball Mounts and PRO-PULL Propeller Removal Tools
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.

1-800-497-7479

ABOUT RAM MOUNT
RAM is the revolutionary universal ball and socket mounting system that allows you to mount practically anything anywhere. Unlike other mounts on the market, RAM allows you to mount items where you need them most. Whether its in an aircraft, automobile, boat, ATV, truck, snowmobile, farming vehicle, motorcycle, fork lift or any other situation, RAM's family of more than 900 interchangeable accessories will offer you solutions to your most challenging mounting problems. If you need to mount a GPS, laptop, pda, pocket pc, radar, camera, light, computer, cellular phone, speaker, mirror, antenna, or just about anything else look no further. RAM mounts will help you make a professional job easy and affordable. Its unique design provides easy installation, mobility, strength, versatility, vibration protection and durability, all at a low cost. RAM is backed by NPIs renowned Lifetime Warranty which makes it the mounting system of choice. To provide light weight strength and corrosion resistance, RAM is made of marine grade aluminum with a powder coated finish, stainless steel hardware and rubber balls. Recognized and accepted by the U.S. Patent Office, RAM is the only universal ball-and-socket system that holds tremendous amounts of weight in high vibration applications for military, commercial and private use. Look further into our web site and see the newest products and learn more about this revolutionary mounting system that is quickly becoming the industry standard. Remember when faced with a difficult mounting situation, Just RAM It!
ABOUT NATIONAL PRODUCTS, INC.
NPI stands for National Products Inc. Founded by Jeff Carnevali in 1994, NPI is the parent company of both RAM Mounting Systems and PRO PULL Prop Pulling Tools. Located in Seattle Washington, NPI distributes products around the globe. Providing some of the most innovative and durable products available, NPI has rapidly become an industry leader and continues to gain respect from both electronics manufacturers and those needing the finest tools for marine use. Having an in-house design staff and rapid prototyping abilities, NPI is able to quickly engineer and produce quality items for the ever changing electronics market. With rubber injection, sand casting, metal fabrication, and plastic injection molding as well as a die casting facility within one half mile of each other,. coordinating and developing new products is trouble-free. With a multitude of patented products and a dedicated staff, you can be sure that NPI will continue to provide products and support to the industries and customers that have made NPI a huge success.
WWW.RAM-MOUNT.COM FEATURES
Your Best Connection For Mount Solutions
Product Search Find product mount solutions easy and efficiently at www.ram-mount.com with the RAM Mount Product Search Engine. Laptop Mount Wizard Looking to find a vehicle laptop mount system? Search, based on vehicle year, make and model, the RAM Laptop Mount Wizard provides solutions for all vehicles. Motorcycle Mount Wizard Providing mount solutions for nearly all motorcycles since 1991, the Motorcycle Mount Wizard offers multiple solutions for your cycling needs. RAM On-line Order Center COMING SOON Exclusively for RAM Mount Resellers, the RAM On-line Order Center provides an easy way to order products online. Features include:
DRAG AND DROP SHOPPING CART ORDER TRACKING PRICE LISTS BILLING AND SHIPPING INFORMATION CENTER

TABLE OF CONTENTS

The RAM Mount Marine Catalog is a complete guide for all your cycling needs. The information contained in this catalog is consistently growing; therefore, please check the www.ram-mount.com site for updates, or solutions for all your mounting needs. Note: Please see our GPS catalog for Marine Electronic Handheld Mounts.

PRODUCT NUMBER

BALL SIZE

DESCRIPTION

BALL & SWING ARM MOUNTS
RAM-101-G2U RAM-107U RAM-109HSB RAM-109HU RAM-109H-1U RAM-109H-2U RAM-109VSB RAM-109VU RAM-109V-1U RAM-109V-2U RAM-111U RAM-111-338U RAM-137U RAM-B-101-G2U RAM-B-103-GA18U RAM-B-107-1U RAM-B-107-1U-238 RAM-B-107U RAM-B-107U-238 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.1 RAM MOUNT GARMIN 250C FISH FINDER RAM MOUNT HUMMINBIRD APELCO 97 SWIVEL MOUNT MATRIX AND 500 SERIES RAM SINGLE ARM BALL MOUNT HORIZONTAL BASE RAM SINGLE ARM BALL MOUNT HORIZONTAL BASE RAM DOUBLE SWING ARM BALL MOUNT HORIZONTAL BASE RAM HORIZONTAL SWING ARM WITH RAM SYSTEM RAM SINGLE ARM BALL MOUNT VERTICAL BASE RAM SINGLE ARM BALL MOUNT VERTICAL BASE RAM DOUBLE SWING ARM BALL MOUNT VERTICAL BASE RAM VERTICAL SWING ARM WITH RAM SYSTEM RAM UNIVERSAL ELECTRICAL MOUNT WITH 6 1/4" X 2" BASE RAM DOUBLE ADAPTER PLATE MOUNT RAM MOUNT WITH 3" X 11" X 2 1/2" BASE RAM MOUNT GARMIN 250C FISH FINDER RAM MARINE SYSTEM FOR THE GARMIN 172 SERIES RAM MOUNT FOR HUMMINBIRD PIRANHA MAX 20, 15, AND 10 RAM MOUNT FOR HUMMINBIRD PIRANHA DIAMETER MAX 20, 15, AND 10 RAM MOUNT FOR HUMMINBIRD/APELCO SWIVEL MOUNT MATRIX AND 500 SERIES RAM MOUNT FOR THE HUMMINBIRD/APELCO DIAMETER BASE SWIVEL MOUNT MATRIX AND 500 SERIES 14
FISHING ROD AND TUBE HOLDERS
RAM-114-B RAM-114-BM RAM-114-D RAM-114-DTM RAM-114-F RAM-114-FM RAM-114-R RAM-114-RM RAM-117 RAM-117B RAM-119 RAM-119-23U RAM-119B RAM-119T RAM-119-3 RAM-301-B RAM-301-D RAM-301-F RAM ROD 2000 ROD HOLDER WITH BULKHEAD MOUNT RAM ROD 2000 BULKHEAD MOUNTING BASE RAM ROD 2000 ROD HOLDER WITH DECK AND TRACK MOUNT RAM ROD 2000 DECK AND TRACK MOUNTING BASE RAM ROD 2000 ROD HOLDER WITH FLUSH MOUNT RAM ROD 2000 FLUSH MOUNT BASE RAM ROD 2000 HOLDER WITH BULKHEAD MOUNT AND RAIL MOUNT ADAPTER RAM ROD 2000 RAIL MOUNT ADAPTER KIT RAM ROD FISHING ROD HOLDER SYSTEM RAM ROD FISHING ROD HOLDER RAM TUBE FISHING ROD HOLDER RAM TUBE FISHING ROD HOLDER WITH 2 X 3 PLATE RAM TUBE WITHOUT 1 1/2" DIAMETER BALL AND BASE RAM TUBE WITH TRACK PLATE AND 1 " BALL RAM TRIPLE DECK AND TRACK BASE WITHOUT BALLS RAM TUBE 2000 ROD HOLDER WITH BULKHEAD MOUNT RAM TUBE 2000 ROD HOLDER WITH DECK AND TRACK MOUNT RAM TUBE 2000 ROD HOLDER WITH FLUSH MOUNT 22 22
PRO-PULL PROPELLER REMOVAL TOOLS
PPF-101 PPF-102 PPF-103 PPF-104 PPF-106 PPF-107 PPF-108 PPF-108A PPF-113 PPF-113-1 PPF-113-2 PPF-115 PPF-116 PPF-118 PPF-119 PPF-1/8" MAX. SHAFT DIAMETER BRUTE PROPELLER PULLER KIT WITH SHAFT SAVER BOLT 1 1/8" MAX. SHAFT DIAMETER BRUTE PROPELLER PULLER WITH SHAFT SAVER BOLT 1 1/2" MAX. SHAFT DIAMETER HEAVY-DUTY PROPELLER PULLER 2 1/2" MAX. SHAFT DIAMETER HEAVY-DUTY PROPELLER PULLER 1 1/4" - 2 1/2" 10 TON CHAIN PROPELLER PULLER 2" MAX. SHAFT DIAMETER HEAVY-DUTY PROPELLER PULLER BRONZE 6 IN 1 OUTBOARD & STERN-DRIVE PROPELLER NUT WRENCH ALUMINUM 6 IN 1 OUTBOARD & STERN-DRIVE PROPELLER NUT WRENCH 3/4" - 2" VERSATILE PROPELLER PULLER 5/8" RH/LH SCREW FOR 3/4" - 2" VERSATILE PROPELLER PULLER 3/4" SCREW FOR 3/4" - 2" VERSATILE PROPELLER PULLER OUTBOARD AND STERN-DRIVE PROPELLER PULLER 3" MAX. SHAFT DIAMETER HEAVY-DUTY PROPELLER PULLER 1 1/2" MAX. SHAFT DIAMETER BRUTE PROPELLER PULLER WITH POINTED BOLT 2" MAX. SHAFT DIAMETER BRUTE PROPELLER PULLER WITH POINTED BOLT 3/4"-NC PROPELLER NUT KIT WITH NYLOCK NUT COTTER PIN, BRASS KEY & GREASE 30 30

Ball & Swing Arm Mounts

RAM-101-G2U

Description Double socket arm mount with two round bases. Both bases have the AMPS hole pattern and a custom hardware pack is included for assembly. The mount is 7.35'' tall at maximum extension and is collapsible. Rubber ball and socket feature dampens shock and vibration. For most applications, mount will support up to ten pounds. Features
MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1.5 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: 0.66 lbs

Mount Components

BASE: RAM-202-G2U ARM: RAM-201U BASE: RAM-202U
Compatible Makes & Models GARMIN FISHFINDER 250 GARMIN FISHFINDER 250C GARMIN FISHFINDER 340C GARMIN GPSMAP 178 SOUNDER GARMIN GPSMAP 178C SOUNDER GARMIN GPSMAP 292
Compatible Makes & Models GARMIN GPSMAP 298 SOUNDER GARMIN GPSMAP 392 GARMIN GPSMAP 398 SOUNDER GARMIN GPSMAP 492 GARMIN GPSMAP 498 SOUNDER

RAM-107U

Description The RAM-107 Mount is a Marine Grade Aluminum Swivel Mount with 1.5 inch C Size Ball and Socket System. The base of the mount is a 2.5 inch diameter plate designed to be permanently attached to a flat surface. The plate end of the mount connects to the underside of select Humminbird unit mounts. Features
MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1.5 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: 1.4 lbs
BASE: RAM-107BU ARM: RAM-201U BASE: RAM-202U
Compatible Makes & Models HUMMINBIRD 141C HUMMINBIRD 323 HUMMINBIRD 363 COMBO HUMMINBIRD 383C COMBO HUMMINBIRD FISHFINDER 525 HUMMINBIRD FISHFINDER 535
Compatible Makes & Models HUMMINBIRD FISHFINDER 565 HUMMINBIRD FISHFINDER 585C HUMMINBIRD FISHFINDER 595C COMBO HUMMINBIRD 727 HUMMINBIRD 737 HUMMINBIRD 777C HUMMINBIRD 787C COMBO

RAM-109HSB

Description
The RAM single swing arm mount consists of a 6'' long STRAIGHT swing arm mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.24'' x 1.98'' plate. The rectangular plate is connected to the swing arm with a RAM 1.5'' Ball and Socket System. The connection between the swing arm and the base is a bolt pivot point, and the rectangular plate and arm connection is the RAM ball and socket system. The bolt pivoting point allows a complete 360 degree rotation and the ball and socket system allows a 180 degree vertical pivot with a 360 degree rotation.

MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1.5 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: 2.6 lbs
BASE: RAM-111BTU ARM: RAM-109-1A ARM: RAM-109-1APU BASE: RAM-109H-B

RAM-109H-2U

The RAM dual swing and socket arm mount consists of a 6'' long STRAIGHT swing arm mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25'' x 1.98'' plate. The rectangular plate is connected to the socket arm with a 1.5'' ball and socket system. There are three (3) pivoting points on the mount. The connection between the swing arm and the base is a bolt pivot point, and the rectangular plate to socket arm and the swing arm to socket arm connections have the RAM 1.5'' ball and socket system. The bolt pivoting point allows a complete 360 degree rotation. The dual arm ball and socket system connection allows a 180 degree vertical pivot with a 360 degree rotation while the end plate ball and socket system allows a 180 degree vertical pivot with a 360 degree rotation.
MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1.5 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: 1.75 lbs
BASE: RAM-111BU ARM: RAM-201U POST: RAM-208U ARM: RAM-109-1ATPU BASE: RAM-109H-B

RAM-109VSB

The RAM single swing arm mount consists of a 6'' long STRAIGHT swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25'' x 1.98'' plate. The rectangular plate is connected to the swing arm with a RAM 1.5'' Ball and Socket System. The connection between the swing arm and the base is a bolt pivot point, and the rectangular plate and arm connection is the RAM ball and socket system. The bolt pivoting point allows a complete 360 degree rotation and the ball and socket system allows a 180 degree vertical pivot with a 360 degree rotation.
MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1.5 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: 2.55 lbs BASE: RAM-111B ARM: RAM-109U-G2 BASE: RAM-109V-B

RAM-109VU

The RAM single swing arm mount consists of a 6'' long BENT swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.24'' x 1.98'' plate. The rectangular plate is connected to the swing arm with a pivot post. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation.

MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1.5 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: 2 lbs
BASE: RAM-111BTU ARM: RAM-109-1APU BASE: RAM-109V-B

RAM-109V-1U

The RAM dual swing arm mount consists of two 6'' long BENT swing arms mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25'' x 1.98'' plate. The rectangular plate is connected to the swing arm with a pivot post. There are three (3) pivoting points on the mount. One at the swing arm and base, one at the center where the two swing arms join and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation, making the RAM-109V-1 one of the most versatile swing arm mounts on the market today.
MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1.5 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: 2.82 lbs
BASE: RAM-111BTU ARM: RAM-109-1A ARM: RAM-109-1APU BASE: RAM-109V-B

RAM-109V-2U

The RAM dual swing and socket arm mount consists of a 6'' long STRAIGHT swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25'' x 1.98'' plate. The rectangular plate is connected to the socket arm with a 1.5'' ball and socket system. There are three (3) pivoting points on the mount. The connection between the swing arm and the base is a bolt pivot point, and the rectangular plate to socket arm and the swing arm to socket arm connections have the RAM 1.5'' ball and socket system. The bolt pivoting point allows a complete 360 degree rotation. The dual arm ball and socket system connection allows a 180 degree vertical pivot with a 360 degree rotation while the end plate ball and socket system allows a 180 degree vertical pivot with a 360 degree rotation.
MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1.5 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: 2.83 lbs
BASE: RAM-111BU ARM: RAM-201U POST: RAM-208U ARM: RAM-109-1ATPU BASE: RAM-109V-B

RAM-111U

Description 1.5'' diameter Ball Marine Grade Aluminum Mount with 2'' x 6 1/4'' Plate and a 4 5/8'' C size arm. Features
MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1.5 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: 1.45 lbs BASE: RAM-111B ARM: RAM-201U BASE: RAM-202U

RAM-111-338U

Made of durable light weight aluminum, the RAM Double Adapter Plate offers a round and square platform for numerous RAM products and hundreds of others on the market. Here are just a few of the ways you can use this product: 1. Easily place an external GPS or XM antenna behind the factory display 2. Stack devices so your GPS is just above your Fish Finder 3. Mount your cell phone over your VHF to keep communications at the ready If you already have a RAM system with the AMPS hole pattern, this innovative component will easily integrate into your existing system. Well suited to a variety of vehicles and applications, the new RAM Double Adaptor Plate is sure to make space and add convenience where ever you need it.

MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1.5 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: N/A
BASE: RAM-338U BASE: RAM-111U ARM: RAM-201U BASE: RAM-202U

RAM-137U

Description Aluminum 1.5'' Ball 2.5'' diameter Base with 3'' x 11'' Plate Mount. Features
BASE: RAM-137BU ARM: RAM-201U BASE: RAM-202U
GARMIN GPSMAP 2006 GARMIN GPSMAP 2006C GARMIN GPSMAP 2010 GARMIN GPSMAP 2010C GARMIN GPSMAP 2110 GARMIN GPSMAP 2210 GARMIN GPSMAP 3010C GARMIN GPSMAP 3210 LOWRANCE LCX-111C HD

RAM-B-101-G2U

The RAM Marine Grade Aluminum Dash Mount consists of the 1'' diameter ball and socket system with RAM Universal 2.5'' diameter Plate and connection hardware. This mount is designed to be a universal mounting solution for both RAM and non-RAM designed products. The hole pattern found on the 2.5'' Plate will connect to a large variety of third party cradles and mounts.
MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: N\A
BASE: RAM-B-202-G2U ARM: RAM-B-201U POST: RAM-B-202U
GARMIN FISHFINDER 120 GARMIN FISHFINDER 140 GARMIN FISHFINDER 250 GARMIN FISHFINDER 250C

RAM-B-103-GA18U

Description RAM Marine System for the Garmin 172 series. Features
MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: N/A
ADAPTER PLATE: RAM-B-202-GA18U ARM: RAM-B-201U BASE: RAM-B-202U
GARMIN GPSMAP 172 GARMIN GPSMAP 172c

RAM-B-107-1U

The RAM-B-107-1 Mount is a Marine Grade Aluminum Swivel Mount with 1.0 inch B Size Ball and Socket System. The base of the mount is a 2.5 inch diameter plate designed to be permanently attached to a flat surface. The plate end of the mount connects to the underside of the Humminbird Piranah MAX and Eagle Cuda unit mounts.
BASE: RAM-B-107-1BU ARM: RAM-B-201U BASE: RAM-B-202U
LOWRANCE M52I S-GPS LOWRANCE M56 S-MAP LOWRANCE M56I S-MAP LOWRANCE M68C S-MAP LOWRANCE M68C S-MAP ICEMACHINE LOWRANCE M68I S-MAP LOWRANCE X47 LOWRANCE X47EX LOWRANCE X67C
LOWRANCE X67C ICEMACHINE EAGLE CUDA 128 EAGLE CUDA 168 (EXCLUDING 168 EX) EAGLE CUDA 240 SERIES EAGLE FISHEASY 240 EAGLE FISHEASY 320 C

RAM-B-107-1U-238

The RAM-B-107-1U-238 Mount is a Marine Grade Aluminum Swivel Mount with 1.0 inch B Size Ball and Socket System. The base of the mount is a 2 7/16" X 1 5/16" inch diameter plate designed to be permanently attached to a flat surface. The plate end of the mount connects to the underside of the Humminbird Piranah MAX and Eagle Cuda unit mounts.

BASE: RAM-B-107-1BU ARM: RAM-B-201U BASE: RAM-B-238U

RAM-B-107U

The RAM-B-107 Mount is a Marine Grade Aluminum Swivel Mount with 1.0 inch B Size Ball and Socket System. The base of the mount is a 2.5 inch diameter plate designed to be permanently attached to a flat surface. The plate end of the mount connects to the underside of select Humminbird unit mounts.
MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: 0.68 lbs
BASE: RAM-B-107BU ARM: RAM-B-201U POST: RAM-B-202U
HUMMINBIRD 141C HUMMINBIRD 323 HUMMINBIRD 363 COMBO HUMMINBIRD 383C COMBO HUMMINBIRD FISHFINDER 525 HUMMINBIRD FISHFINDER 535 HUMMINBIRD FISHFINDER 565 HUMMINBIRD FISHFINDER 585C HUMMINBIRD FISHFINDER 595C COMBO HUMMINBIRD MATRIX 12
HUMMINBIRD MATRIX 17 HUMMINBIRD MATRIX 27 HUMMINBIRD MATRIX 37 HUMMINBIRD MATRIX 67 COMBO HUMMINBIRD MATRIX 77C HUMMINBIRD MATRIX 87C COMBO HUMMINBIRD MATRIX 97 COMBO HUMMINBIRD PIRANHAMAX 10 HUMMINBIRD PIRANHAMAX 15 HUMMINBIRD PIRANHAMAX 20

RAM-B-107U-238

Description RAM Mount for the Humminbird/Apelco diameter base swivel mount Matrix and 500 series. Features
MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: 0.68 lbs.
ADAPTER PLATE: RAM-B-107BU ARM: RAM-B-201U BASE: RAM-B-238U

RAM-114-B

Description RAM Rod 2000 Holder with Bulkhead Mount. Base Type Vertical Mounting Base Cradle Design Vertical mounting base has a socket for a vertical arm that extends to the ROD holder. If you require a horizontal mount, consider the RAM-114-F. Features
MATERIAL: High Strength Plastic BALL SIZE: N\A COLOR: Black WEIGHT: 1.02 lbs
HOLDER: RAM-114 BASE: RAM-114-BM

RAM-114-BM

Description RAM Rod 2000 Bulkhead Mounting Base. Part Design This base has a socket for the RAM Rod 2000 arm at 0 degrees to the base plate. If you require a horizontal mount, consider the RAM-114-FM. Features
MATERIAL: High Strength Plastic BALL SIZE: N\A COLOR: Black WEIGHT: 0.2 lbs

RAM-114-D

Description RAM Rod 2000 Holder with Deck and Track Mount. Base Type Flat Surface Mounting Base Features
MATERIAL: High Strength Plastic BALL SIZE: N\A COLOR: Black WEIGHT: 1.12 lbs
HOLDER: RAM-114 BASE: RAM-114-DTM

RAM-114-DTM

Description RAM Rod 2000 Deck and Track Mounting Base. Features
MATERIAL: High Strength Plastic BALL SIZE: N\A COLOR: Black WEIGHT: 0.44 lbs

RAM-114-F

Description RAM Rod 2000 Holder with Flush Mount. Base Type Horizontal Mounting Base Cradle Design Horizontal mounting base has a socket for a vertical arm that extends to the ROD holder. If you require a vertical mount, consider the RAM-114-B. Features
MATERIAL: High Strength Plastic BALL SIZE: N\A COLOR: Black WEIGHT: 1.21 lbs
HOLDER: RAM-114 BASE: RAM-114-FM

RAM-114-FM

Description RAM Rod 2000 Flush Mounting Base. Part Design This base has a socket for the RAM Rod 2000 arm at 90 degrees to the base plate. If you require a vertical mount, consider the RAM-114-BM. Features
MATERIAL: High Strength Plastic BALL SIZE: N\A COLOR: Black WEIGHT: 0.3 lbs

RAM-114-R

Description RAM Rod 2000 Holder with Bulkhead Mount and Rail Mount Adapter. Base Type Rail Mounting Base Features
MATERIAL: High Strength Plastic BALL SIZE: N\A COLOR: Black WEIGHT: N/A
HOLDER: RAM-114 BASE: RAM-114-BM BASE: RAM-114-RM

RAM-114-RM

Description Rail Mount Adapter for the RAM-114FM and RAM-114BM Base for RAM Rod 2000. Part Design This adapter joins to base plates with the screws provided and turns the flat base into a rail base. The adapter is a 'U' shape so it can wrap around a tube mount and the clamp by joining to the flat plate base. Features
MATERIAL: High Strength Plastic BALL SIZE: N\A COLOR: Black WEIGHT: 0.4 lbs

RAM-117

RAM-117B
Plastic RAM ROD-2000 Fishing Rod Holder with Aluminum Round 2.5'' Diameter Base Mount.
Plastic RAM ROD 2000 Fishing Rod Holder with 1.5'' Ball.
MATERIAL: High Strength Plastic BALL SIZE: 1.5 Inch Rubber Ball COLOR: Black WEIGHT: 0.61 lbs
MATERIAL: High Strength Plastic HOLDER: RAM-117U BALL SIZE: 1.5 Inch Rubber Ball ARM: RAM-201U COLOR: Black WEIGHT: 1.75 lbs

RAM-119

RAM-119-23U
Description RAM Tube Fishing Rod Holder.
This aluminum tube is design to hold the handle end of you fishing rod. It is an aluminum tube with a 1.5'' socket at the end, connected to a 2.5'' round plate with a 1.5'' Ball.
This aluminum tube is design to hold the handle end of you fishing rod. It is an aluminum tube with a 1.5'' socket at the end, connected to a 2 x 3 plate with a 1.5'' Ball.

MATERIAL: Powder Coated Marine Grade Aluminum HOLDER: RAM-119B BALL SIZE: 1.5 Inch Rubber Ball BASE: RAM-202U COLOR: Black Powder Coat WEIGHT: 1.71 lbs
MATERIAL: Powder Coated Marine Grade Aluminum HOLDER: RAM-119B BALL SIZE: 1.5 Inch Rubber Ball BASE: RAM-202U-23 COLOR: Black Powder Coat WEIGHT: 1.71 lbs

RAM-119B

RAM-119T
Description RAM Tube Fishing Rod Holder without 1 Diameter Ball and Base.
This aluminum tube is design to hold the handle end of you fishing rod. It is an aluminum tube with a 1.5'' socket at the end. It will connect to any of the RAM 1.5'' Ball accessories.
This aluminum tube is design to hold the handle end of you fishing rod. It is an aluminum tube with a 1.5'' socket at the end, connected to a track plate with a 1.5'' Ball.
MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1.5 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: 1.27 lbs
MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1.5 Inch Rubber Ball COLOR: Black Powder Coat

RAM-119-3

RAM-301-B
Description RAM Triple Deck and Track Base without Balls. Features
MATERIAL: Powder Coated Marine Grade Aluminum BALL SIZE: 1.5 Inch Rubber Ball COLOR: Black Powder Coat WEIGHT: N\A
Description RAM Tube 2000 Holder with Bulkhead Mount. Features
MATERIAL: High Strength Plastic BALL SIZE: N\A COLOR: Black WEIGHT: N\A

RAM-301-D

RAM-301-F
Description RAM Tube 2000 Rod Holder with Deck and Track Mount. Features
Description RAM Tube 2000 Rod Holder with Flush Mount. Features

PPF-101

Description 1 1/8" Max. Shaft Diameter Brute Propeller Puller Kit with Shaft Saver Bolt. PRO-PULL Brute models are designed to remove, 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4 - 2. They are made of high strength heat-treated alloy steel and finished with cadmium for protection. These tools have fine thread screws to enable a strong pulling force with little effort. Features Kit includes: (3/4 - 1 1/8) Shaft diameter propeller puller, a wrench for the puller and prop nut, a stainless steel cotter pin, a brass prop shaft key, a brass nylock prop nut, waterproof grease, safety lanyard and is packaged in a rustproof carrying case. Clearence required between propeller hub and strut is 1/4 minimum. Weight 6 lbs.

PPF-102

Description 1 1/8" Max. Shaft Diameter Brute Propeller Puller with Shaft Saver Bolt. PRO-PULL Brute models are designed to remove, 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4 - 2. They are made of high strength heat-treated alloy steel and finished with cadmium for protection. These tools have fine thread screws to enable a strong pulling force with little effort. Features (3/4 - 1 1/8) Shaft diameter tool only is the same propeller puller used in the PPF-101 Kit. Clearance required between propeller hub and strut is 1/4 minimum Weight 4 lbs.

PPF-103

Description 1 1/2" Max. Shaft Diameter Heavy-Duty Propeller Puller. PRO-PULL Heavy Duty models are designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 1 1/4 - 3. They are made of high strength heat-treated allow steel and finished with cadmium for protection. Threaded rods, washers and nuts are zinc plated steel. The forked end of the puller will fit behind the propeller hub with minimal clearance required. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it wont slip off while in use. Features (1 1/4 - 1 1/2) Shaft diameter propeller puller. Clearance required between propeller hub and strut is 3/4 minimum. Weight 12 lbs.

PPF-104

Description 2 1/2" Max. Shaft Diameter Heavy-Duty Propeller Puller. PRO-PULL Heavy Duty models are designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 1 1/4 - 3. They are made of high strength heat-treated allow steel and finished with cadmium for protection. Threaded rods, washers and nuts are zinc plated steel. The forked end of the puller will fit behind the propeller hub with minimal clearance required. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it wont slip off while in use. Features (2 1/8 - 2 1/2) Shaft diameter propeller puller. Clearance required between propeller hub and strut is 7/8 minimum. Weight 27 lbs.

PPF-106

Description 1 1/4" - 2 1/2" 10 Ton Chain Propeller Puller. PRO-PULL 10 Ton Chain propeller puller is designed to remove 2, 3, 4, 5 and 6 blade propellers on inboard shafts ranging from 1 1/4 - 2 1/2. Its made of high strength heat-treated allow steel and finished with cadmium for protection. The chains are grade 70 transport rated and are plated with cadmium. All bolts, nuts and threaded parts are either grade 5 or heat-treated allow steel finished with cadmium. Four propeller shaft adapters are used to set puller up for a specific shaft size and/or if propeller blades extend forward of the propeller hub. Four hooks with safety rings are used on propellers that have no clearance between the propeller hub and the strut. The chains conform to propeller blades that overlap to accomodate easy propeller removal without damage to the blades. Complete with zinc plated case hardened box wrench to operate puller a container of waterproof grease, waterproof tool box and instructions with diagrams for use. Features (1 1/4 - 2 1/2) Shaft diameter 10 Ton chain propeller puller. Net weight of tool complete with accessories and stowage box. Weight 34 lbs.

PPF-113-1 / PPF-113-2

Product Numbers PPF-113-1: 5/8" RH/LH Screw For 3/4" - 2" Versatile Propeller Puller PPF-113-2: 3/4" Screw For 3/4" - 2" Versatile Propeller Puller Weight PPF-113-1: 0.8 lbs. PPF-113-2: 0.9 lbs.

PPF-113-2

PPF-113-1

PPF-115

Description Outboard and Stern-Drive Propeller Puller. PRO-PULL Outboard and Stern-Drive propeller puller is designed to remove any 2, 3, 4, 5 and 6 blade propeller. Structural components are made of heat-treated alloy steel finished with cadmium for protection. The bolt is grade 5 steel plated with cadmium. This puller will also remove any Duo-Prop. In addition this tool may also be used on many boats with inboard shafts up to 1 1/4 diameter. Comes complete with a waterproof carrying case for convenient stowage. This propeller puller requires no additional tools for operation. Features Outboard and Stern-Drive propeller puller. Net weight includes puller with all accessories. Weight 22 lbs.

PPF-116

Description 3/4" - 2" Versatile Propeller Puller. PRO-PULL Versatile propeller puller is designed to remove 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4 - 2. Its made of high strength heat-treated alloy steel and finished with cadmium for protection. The threaded rods, pivot pins and handle are manufactured using the finest stress-proof steels available. The shaft end of the puller has a recess to captivate and hold the propeller shaft in the center of the tool so it cant slip off while in use. The offset design of the pivot pins keep the hook of the tool on the propeller hub and pulls through the center of the propeller shaft. Minimal clearance between the propeller hub and strut are required due to the unique puller design. This propeller puller requires no additional tools for operation. Features (2 1/8 - 2 1/2) Shaft diameter propeller puller. Clearance required between propeller hub and strut is 7/8 minimum. Weight 16 lbs.

PPF-118

Description 1 1/2" Max. Shaft Diameter Brute Propeller Puller with Pointed Bolt. PRO-PULL Brute models are designed to remove, 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4 - 2. They are made of high strength heat-treated alloy steel and finished with cadmium for protection. These tools have fine thread screws to enable a strong pulling force with little effort. Features (1 1/4 - 1 1/2) Shaft diameter propeller puller with removable handle and safety lanyard. Clearance required between propeller hub and strut is 5/8. Weight 11 lbs.

PPF-119

Description 2" Max. Shaft Diameter Brute Propeller Puller with Pointed Bolt. PRO-PULL Brute models are designed to remove, 2, 3, most 4 and some 5 blade propellers on inboard shafts ranging from 3/4 - 2. They are made of high strength heat-treated alloy steel and finished with cadmium for protection. These tools have fine thread screws to enable a strong pulling force with little effort. Features (1 5/8 - 2) Shaft diameter propeller puller with removable handle and safety lanyard. Clearance required between propeller hub and strut is 3/4. Weight 28 lbs.

PPF-216

Description 3/4"-NC Propeller Nut Kit with Nylock Nut Cotter Pin, Brass Key and Grease.

CONTACT US

To request additional information or determine the best mounting method for your equipment, contact us through any of the following methods: National Products, Inc. Phone: Fax: Website: Email: 206-763-8361 206-763-9615 www.ram-mount.com Staff@ram-mount.com
RAM Mount products are sold only through dealers and re-sellers. To find a RAM Mount dealer near you connect to the following website address: www.ram-mount.com