Alkaline batteries recommended. Phillips/cross head screwdriver (not included) needed to insert batteries.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

FCC Statement:

BATTERIES REQUIRED
NOT INCLUDED x3 1.5V AA/R6 size

87625/87623 Asst.

AGES 6+
Not suitable for children under 3 years because of small parts - choking hazard.
Product and colors may vary. 2008 Lucasfilm Ltd. & or TM where indicated. All rights reserved. * and/or TM* & 2007 Hasbro. All Rights Reserved. P/N 6769590000 TM & denote U.S. Trademarks.

STEP 1

The first step in building a lightsaber is to install the power-generating component.

INSTALLING BATTERIES

Using a Phillips/crosshead screwdriver (not included), loosen screw in door and remove door. Insert 3 x 1.5v AA or R6 size batteries (not included) into hilt. Alkaline batteries recommended. Replace battery door and tighten screw.

End caps

Tonfa handle

Kyber crystals (3)

Blade-emitter guard

Hilt sleeves (4)

Sleeve rings (3)

CAUTION:

STEP 2
Install one or more crystals into the chamber in the hilt.

CRYSTAL

1. e sure to insert the batteries correctly and always follow the B toy and battery manufacturers instructions; 2. o not mix old and new batteries or alkaline, standard D (carbon-zinc) or rechargeable (nickel-cadmium) batteries; 3. lways remove weak or dead batteries from the product. A

TO AVOID BATTERY LEAKAGE

Each crystal causes the lightsaber to emit a different sound. After you complete your lightsaber, you can always switch, add or remove crystals.
IMPORTANT: BATTERY INFORMATION
Please retain this information for future reference. Batteries should be replaced by an adult.
1. lways follow the instructions carefully. Use only batteries specified A and be sure to insert them correctly by matching the + and polarity markings. 2. o not mix old batteries and new batteries, or standard (carbon-zinc) D with alkaline batteries. 3. emove exhausted or dead batteries from the product. R 4. emove batteries if product is not to be played with for a long time. R 5. o not short-circuit the supply terminals. D 6. hould this product cause, or be affected by, local electrical interference, S move it away from other electrical equipment. Reset (switching off and back on again or removing and re-inserting batteries) if necessary. 7. ECHARGEABLE BATTERIES: Do not mix these with any other types of R battery. Always remove from the product before recharging. Recharge batteries under adult supervision. DO NOT RECHARGE OTHER TYPES OF BATTERIES.
Color Chart: Red: red crystal Blue: blue crystal Green: green crystal Aqua: blue and green crystals Orange: red and green crystals Purple: red and blue crystals Note: If the crystals become misplaced or lost, turn the power on and off (see Power Up section below) to cycle through the different blade colors and sounds.

Store the extra crystals in the storage chamber.
Place blade on hilt and hold it in place.

STEP 3

The above steps are the basic steps for building a lightsaber. Switch and combine the parts to customize your lightsaber!
Choose a sleeve ring and slide it over the blade.

CUSTOMIZE

STEP 4
NOTE: Some configurations will cover the power button. Please be sure that the power button is exposed when completing your configuration. SLEEVE RING
Choose a hilt sleeve and slide it on the hilt.

STEP 5

Practice your dueling skills! Press the button to power up your lightsaber.

SLEEVE

POWER UP
NOTE: Line up rib inside sleeve with slot on hilt.
NOTE: When customizing your lightsaber, always make sure the button is exposed so that you can power up!

STEP 6

END CAP
Choose an end cap and attach it to the hilt.
When customizing your lightsaber, always make sure the button is exposed so that you can power up!
Congratulations! You have assembled your lightsaber!

FINISHED

Count Dooku Lightsaber

Mace Windu Lightsaber

Red Green Blue
ASSEMBLING CHARACTER-SPECIFIC LIGHTSABERS

Yoda Lightsaber

Maris Brood Lightsaber

Receive 3 Free Star Wars Saga Legends Action Figures Through the Mail*
*See Terms and Conditions Below

Blasters:

Clone Trooper Blaster

Stormtrooper Blaster

Step #2: Print out this orde fo m and fill it out completely. Make sure to indicate w ch item youve purch sed on thi fo m (b out ompletel. p #o t ord form d order f rde rder d de der o m e r which item youve purchased on th form (below). m u ve ch hased this orm (below). b belo On e d abo ab Only the items listed above are eligible. listed abo e e el b eligible. Step #3: Enclose your original receipts (copies will not be accepted) showing the purchase of a qualifying item. On the original receipts write the UPC code # (This is the 10-digit number found below the bar code on the bottom of the packaging of the eligible product) for the qualifying product. We recommend that you print and keep a copy of the receipts for your own records. Step #4: Mail your Order Form and Original Receipts to: STAR WARS FREE FIGURE GIVEAWAY PO BOX 11488 BOZEMAN, MT 59719-1488 All requests must be postmarked by April 3rd, 2010 and received by April 10th, 2010.
Name: ________________________________________________________________________________________________________ Street Address: _______________________________________________________________________________________________ _ ___________________________________________________________________________________ Apt: ______________________ _ City: _______________________________________________________ State: ________________ Zip Code: ________________ _ Name of the Qualified Star Wars Item Purchased: ______________________________________________________________ _

Terms and Conditions:

Send in this completed order form with the original receipts showing the purchase of one or more of the following Star Wars items: Star Wars Stormtrooper Blaster, Star Wars Clone Trooper Blaster, Star Wars Clone Commander Blaster, Star Wars General Grievous Blaster, Star Wars Force Action Lightsaber, Star Wars Electronic Lightsaber, Star Wars Duel Action Lightsaber, and Star Wars Captain Rex Electronic Command Helmet. On the original receipts, hand-print the UPC Code # (found at the bottom of the packaging) from the eligible product. Mail order form and original receipts to the address listed above. Receipts must be dated 1/25/2010 through 3/20/2010. Allow up to 8-10 weeks following receipt of submission for verification and postal mail delivery of your 3 free Star Wars Saga legends action figures. Free figures received depend on availability. Requests for specific figures will not be honored. This offer cannot be combined with any other promotional offer, rebate, coupon or discount. Original receipts may not be copied, reproduced, traded or sold. No submissions or receipts will be returned. Offer valid for residents of the United States only. Offer available until 4/3/2010 or while supplies last, whichever is earlier. Submissions postmarked after 4/3/2010 or received after 4/10/2010 will not be honored or acknowledged. Hasbro is not responsible for lost, late, illegible, incomplete orders or postage due, damaged or misdirected mail. Hasbro reserves the right to withdraw or modify any terms of this offer, and to confirm the identity of any person sending in a submission. Offer valid for end users only, excludes resellers and distributors. This offer may not be published in any promotional offer magazine or website without Hasbros written permission. Offer void where prohibited by law or regulation. 2010 Lucasfilm Ltd. & or TM where indicated. All rights reserved. 2010 Hasbro. All Rights Reserved.

sraW ratS

General Grievous Blaster

Clone Commander Blaster

sraW ratS s r sraW ratS
Step Purchase a o h following Hasbro Ste St Step #1: Purchase any of the following Hasbr P se low lo ng ro
Instructions for Receiving 3 Free
Saga Legends Action Figures: 3/20/2010: products betwee prod c b tween 1/25/2010 and 3/ 0/2010: roducts between / d 3/: 3/2 /

Helmets:

Any Force Action Lightsaber
Electronic Lightsabers**:
Any Electronic Lightsaber
Any Duel Action Lightsaber
**Non-Electronic Lightsabers Not Included

Captain Rex Electronic Command Helmet