HDMI/DVI Cable

Ferrite Core (Power Cord, Headphones Cable, S-Video Cable) The ferrite core is used to shield the cable from interference.
When connecting a cable, open the ferrite core and clip it around the cable.

Using the Stand-Base

Two or more people should carry the PDP. Never lay the PDP on the floor because of possible damage to the screen. Always keep the PDP upright. The PDP can rotate 20 degrees in right and left directions.

-20 ~ 20

English - 4

3:39:43

Control Panel

Front (or Side) Panel

Speaker
The product colour and shape may vary depending on the model.
1 SOURCE Displays a menu of all of the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2, HDMI3, and DTV). HDMI3 mode is available only in PS42Q96HD/PS42Q97HD/PS50Q96HD/ PS50Q97HD models. 4 C/P. Press to change channels. In the on-screen menu, use the C/P. buttons as you use the and buttons on the remote control. (ENTER) Press to confirm a selection. (Power) button Press to turn the TV on and off. Power Indicator Power Off: Blue Power On: Off Remote Control Sensor Aim the remote control towards this spot on the TV.
2 MENU Press to see the on-screen menu of your TVs features. 3 + Press to increase or decrease the volume. In the on-screen menu, use the + buttons as you use the and buttons on the remote control.

English - 5

3:39:44

Connection Panel

Side Panel 1
1 HDMI IN 3 (PS42Q96HD/PS42Q97HD/ PS50Q96HD/PS50Q97HD) Connect to the HDMI jack of a device with HDMI output. 2 S-VIDEO or VIDEO / AUDIO L/R Video (S-Video or Video) and audio inputs for external devices, such as a camcorder or VCR. Rear Panel 3 Headphones jack You can connect a set of headphones if you wish to watch a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing.

Cable Television Network

Whenever you connect an audio or video system to your set, ensure that all elements are switched off. When connecting an external device, match the colour of the connection terminal to the cable. Continued.

English - 6

3:39:48
1 POWER IN Connect the supplied power cord. 2 Connecting external Audio Devices Connect RCA audio signals from the TV to an external source, such as Audio equipment. 3 EXT 1, EXT 2 Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players. Input/Output Specification
Connector EXT 1 EXT 2 Input Output Video Audio(L/R) RGB Video + Audio(L/R) Only TV or DTV output is available. Output you can choose.
4 COMPONENT IN Audio (AUDIO L/R) and video (Y/PB/PR) inputs for Component. 5 DIGITAL AUDIO OUT (OPTICAL) Connect to a Digital Audio Component. 6 SERVICE Connector for service. Connect the serial jack between the electro-motion wall mount bracket and your TV when you want to adjust the TV viewing angle using your remote control. 7 PC IN / AUDIO Connect to the video and audio output jack on your PC. 8 COMMON INTERFACE Slot Insert CI (Common Interface) card into the slot. (refer to page 46) When not inserting CI CARD in some channels, Scramble Signal is displayed on the screen. The pairing information containing a telephone number, CI CARD ID, Host ID, and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. When the channel information configuration has finished, the message Updating Completed is displayed, indicating that the channel list is now updated. Insert the CI-Card in the direction marked on it.

Move Enter Return Programme (Programme number to be assigned to a channel) Press the or button until you find the correct number. You can also select the channel number directly by pressing the numeric buttons (0~9). Colour System: Auto/PAL/SECAM/NTSC4.43 Press the or button to select the required colour standard. Sound System: BG/DK/I/L Press the or button to select the required sound standard. Channel (When you know the number of the channel to be stored) Press the or button to select C (Air channel) or S (Cable channel). Press the button, then press the or button to select the required number. You can also select the channel number directly by pressing the numeric buttons (0~9). If there is abnormal sound or no sound, re-select the sound standard required. Search (When you do not know the channel numbers) Press the or button to start the search. The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. Store (When you store the channel and associated programme number) Set to OK by pressing the ENTER/OK button.
Channel mode mode): When completing tuning, the broadcasting stations in your area have P (Programme
been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode. C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode. S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.

English - 15

3:40:00
Adding / Locking Channels Not available in DTV or external input mode. Using the Channel Manager, you can conveniently lock or add
channels. 1 Press the MENU button to display the menu. 2 Press the or button to select Channel, then press the ENTER/OK button. 3 Press the or button to select Channel Manager, then press the ENTER/OK button. Adding channels Using the Channel List, you can add channels. Select Channel List by pressing the ENTER/OK button. Move to the ( ) field by pressing the /// buttons, select a channel to be added, and press the ENTER/OK button to add the channel. If you press the ENTER/OK button again, the ( ) symbol next to the channel disappears and the channel is not added.
Channel Manager Channel List Child Lock : Off

P 1 C4 Prog. C -C4 C 24 C2 C5 C 80 C7 C 36 C 52 C 11 Add Move Page

Channel List

Locking channels This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. 6 Press the or button to select Child Lock, then press the ENTER/ OK button. 7 Select On by pressing the or button, then press the ENTER/OK button. 8 Press the or button to select Channel List, then press the ENTER/OK button. 9 Move to the ( ) field by pressing the /// buttons, select a channel to be locked, and press the ENTER/OK button. If you press the ENTER/OK button again, the ( ) symbol next to the channel disappears and the channel lock is canceled. A blue screen is displayed when Child Lock is activated. 10 Press the EXIT button to exit.

1 / 10

Lock Enter Return
these You can selectremote options simply by pressing the CH LIST button on the control.

English - 16

3:40:02
Sorting the Stored Channels Not available in DTV or external input mode. This operation allows you to change the programme numbers
of the stored channels. This operation may be necessary after using the auto store. 1 Press the MENU button to display the menu. 2 Press the or button to select Channel, then press the ENTER/OK button. 3 Press the or button to select Sort, then press the ENTER/ OK button. 4 Select the channel that you wish to move by pressing the or button, then press the ENTER/OK button. 5 Select the number of the programme to which the channel is to be moved by pressing the or button. Press the ENTER/OK button. The channel is moved to its new position and all other channels are shifted accordingly. 6 Repeat steps 4 to 5 until you have moved all the channels to the required programme numbers. 7 Press the EXIT button to exit.
Move TV Prog. 4 Ch. C C76 C5 C6 C7

Enter Sort Name

Assigning Names to Channels in or external input mode. Not availablewillDTVassigned automatically when channel Channel names be
information is broadcast. These names can be changed, allowing you to assign new names. 1 Press the MENU button to display the menu. 2 Press the or button to select Channel, then press the ENTER/OK button. 3 Press the or button to select Name, then press the ENTER/OK button. 4 Press the or button to select the channel to be assigned to a new name, then press the ENTER/OK button. 5 Press the or button to select a letter, a number, or a symbol (Results in this sequence: A~Z, 0~9, +, -, *, /, blank). Move on to the previous or next letter by pressing the or button, then press the ENTER/OK button. 6 Repeat steps 4 to 5 for each channel to be assigned to a new name. 7 Press the EXIT button to exit.

Black Adjust: Off/Low/Medium/High You can directly select the black level on the screen to adjust the screen depth. Dynamic Contrast: Off/Low/Medium/High You can adjust the screen contrast so that the optimal contrast is provided. Gamma: -3 ~ +3 You can adjust the middle brightness of pictures. Press the or button until you reach the optimal setting. White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset You can adjust the color temperature for more natural picture colors. R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the adjusted screen. Select the required option by pressing the or button, then press the ENTER/OK button. Press the or button until you reach the optimal setting. Reset: The previously adjusted white balance will be reset to the factory defaults. My Colour Control: Pink/Green/Blue/White/Reset This setting can be adjusted to suit your personal preferences. Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen. Select the required option by pressing the or button, then press the ENTER/OK button. Press the or button until you reach the optimal setting. Reset: The previously adjusted colours will be reset to the factory defaults. Edge Enhancement: Off/On You can emphasize object boundaries. Colour Space: Auto/Wide You can set the colour reproduction space for the input signal to Auto or Wide.

English - 20

3:40:06
Selecting the Picture Size
You can select the picture size which best corresponds to your TV viewing requirements. 1 Press the MENU button to display the menu. 2 Press the ENTER/OK button to select Picture. 3 Press the or button to select Size, then press the ENTER/ OK button. 4 Select the required option by pressing the or button, then press the ENTER/OK button. Available options: Auto Wide, 16:9, Wide Zoom, Zoom, 4:3, Just Scan TV Auto Wide: Expanding and pulling up the picture from 4:3 to 16:9 ratio. 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnify the size of the picture more than 4:3. Move the screen up/down using the or button after selecting the by pressing the or ENTER/OK button. Zoom: Magnify the size of the picture vertically on screen. 4:3: Sets the picture to 4:3 normal mode. Just Scan: Displays the input scenes as they are without any cutoff when HDMI 720p, 1080i signals are input. With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off or a specific colour appears on the screen. 5 Press the EXIT button to exit. You can change the picture size simply by pressing the P.SIZE button on the remote control. Depending on the input source, the picture size options may vary. The items available may differ depending on the selected mode.

Picture More Size Screen Mode Digital NR Active Colour DNIe Movie Plus Reset : Auto Wide : 16 : 9 : Auto : On : Off : On : OK

Enter Size

Auto Wide 16:9 Wide Zoom Zoom 4:3 Just Scan
Positioning and Sizing the screen using Zoom Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down direction using the or button as well as the screen size. Move the screen up/down using the or button after selecting the by pressing the or button. Resize the screen vertically using the or button after selecting the by pressing the or button.
Selecting the Screen Mode
When setting the picture size to Auto Wide in a 16:9 wide TV, TV you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it. 1 Press the MENU button to display the menu. 2 Press the ENTER/OK button to select Picture. 3 Press the or button to select Screen Mode, then press the ENTER/OK button. 4 Select the required option by pressing the or button, then press the ENTER/OK button. Available options: 16:9, Wide Zoom, Zoom, 4:3 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnify the size of the picture vertically on screen. 4:3: Sets the picture to 4:3 normal mode. 5 When you are satisfied with your setting, press the ENTER/OK button. 6 Press the EXIT button to exit.

English - 21

Picture More Size Screen Mode Digital NR Active Colour DNIe Movie Plus Reset : Auto Wide : 16 : 9 : Off : On : Off : On : OK

3:40:07

Digital NR / Active Colour / DNIe / Movie Plus
TV Picture Press the MENU button to display the menu. More Press the ENTER/OK button to select Picture. : Auto Wide Size Select the required option by pressing the or button, then : 16 : 9 Screen Mode : Auto Digital NR press the ENTER/OK button. : On Active Colour : Off DNIe Available options: Digital NR, Active Colour, DNIe, Movie : On Movie Plus Plus : OK Reset When you are satisfied with your setting, press the ENTER/OK button. Return Enter Move Press the EXIT button to exit. Digital NR: Off/Low/Medium/High/Auto If the signal received by the television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen. Active Colour: Off/On If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more vivid on-screen picture. This function is not available in PC mode. This function is not available in Movie and Standard mode. DNIe: Off/Demo/On This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality. DNIeTM (Digital Natural Image engine) This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes. This function is not available in PC mode. Movie Plus: Off/On (PS42Q96HD/PS42Q97HD/PS50Q96HD/PS50Q97HD) You can view more natural skin and clear text even in fast moving scenes. The Wide Zoom, Zoom and Just Scan mode is not supported.

TRADEMARK & LABEL LICENSE NOTICE Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

English - 23

3:40:10
Selecting the Sound Mode (depending on the model)
The DUAL I-II button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either DUAL-I or Stereo, depending on the current transmission.
Type of broadcast Regular broadcast (Standard audio) Regular + NICAM Mono NICAM Stereo On-screen indication Mono (Normal use) NICAM

Mono (Normal)

NICAM Stereo

NICAM stereo

NICAM DUAL-I/II

NICAM dual-1

NICAM dual-2

A2 Stereo

Regular broadcast (Standard audio) Bilingual or DUAL-I/II

Mono (Normal use) Dual I

Stereo
Dual II Mono (Forced mono)
If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono. If the stereo signal is weak and automatic switching occurs, switch to Mono. When receiving a mono sound in the AV mode, connect to the AUDIO-L input connector on the panel (front or side). If the mono sound comes out only from left speaker, press the DUAL I-II button.

English - 24

Time Features
TV Setup Press the MENU button to display the menu. Plug & Play Press the or button to select Setup, then press the Language : English ENTER/OK button. Time Game Mode : Off 3 Press the or button to select Time, then press the Blue Screen : Off Melody : Off ENTER/OK button. PC 4 Select the required option by pressing the or button, then Home Theatre PC : Off Light Effect : Off press the ENTER/OK button. More Available options: Clock Set, Sleep Timer, Timer 1, Timer 2, Move Enter Return Timer 3 TV Time 5 When you are satisfied with your setting, press the ENTER/OK button. Clock Set : 00 : 00 Sleep Timer : Off 6 Press the EXIT button to exit. Timer 1 : Inactivated Timer 2 : Inactivated Clock Set Timer 3 : Inactivated You can set the television clock so that the current time is displayed when pressing the INFO button on the remote control. You must also set the time if you wish to use the automatic on or off timers. Move Enter Return Press the or button to select Month, Day, Year, Hour, or Minute. Set these by pressing the or button. TV Timer 1 You can set the Month, Day, Year, Hour, or Minute On Time directly by pressing the numeric buttons on the remote 00 : 00 No control. Off Time 00 : 00 No In the event of a power interruption or the set being turned Repeat Volume off at the supply, the settings for the Clock will be lost. Once 10 Sleep Timer Programme You can select a time period of between 30 and 180 minutes 01 after which the television automatically switches to standby Move Adjust Return mode. Select the preset time interval (Off, 30, 60, 90, 120, 150, or 180) for staying on by pressing the or button. Timer 1 / Timer 2 / Timer 3 You can set the On/Off timers so that the television will switch on or off automatically at the time you select. You must set the clock first. Press the or button to select the required item below. Press the or button to adjust to the setting satisfied. On Time : Select hour, minute, and No/Yes. (To activate timer with the setting satisfied, set to Yes.) Off Time : Select hour, minute, and No/Yes. (To activate timer with the setting satisfied, set to Yes.) Repeat : Select Once, Everyday, Mon~Fri, Mon~Sat, or Sat~Sun. Volume : Select the required volume level. Programme : Select the required channel. You can set the hour, minute, and channel directly by pressing the number buttons on the remote control.

Guide Now & Next Guide Full Guide Scheduled List Default Guide : Full Guide

Enter Channel

Auto Store Manual Store Edit Favourite Channels Channel List

Enter Setup

Menu Transparency : Medium Parental Lock Subtitle Subtitle Mode Audio Format Move Enter Exit : On : Normal : PCM

English - 35

3:40:21
Language Audio Language Subtitle Language Teletext Language Preference
Language Audio Language Subtitle Language Teletext Language
Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Primary Teletext Language Secondary Teletext Language

Preference

The sub-items of the CI Menu may vary depending on the CAM model. (refer to page 46)
Displaying Programme Information
While viewing a channel, additional information about the current programme may be displayed. While viewing a programme, press the INFO button. The programme information is displayed. The information is displayed: Parental Rating Video Type: SD, HD, Radio Audio Type: Mono, Stereo, Dual, Dolby Digital Existence of Teletext or DVB Subtitle Audio Language To exit from banner information, press the INFO button.
21:49 Sat 1 May 1 AFDO, 16:9 AFDO, 16:9 No Block SD Stereo Subtitle English Exit All Channels 14:20 - 14:33 Contains video with AFD O; coded frame is 16:9

English - 36

3:40:22

Operating the DTV Menu

Viewing the DTV Menu After installing your antenna system and TV with appropriate connectors. Plug in the AC main power and switch on the TV. Press the D.MENU button to bring up the DTV menu. The main menu appears on the screen. Its left side has four icons: Guide, Channel, Setup, and Language. 1. Channel This menu consists of 4 sub-menus: Auto Store, Manual Store, Edit Favourite Channels, and Channel Manger. Press the or button to select Channel, then press the ENTER/OK button. The Channel menu is displayed.
Channel Auto Store Manual Store Edit Favourite Channels Channel List
1.1 Auto Store You can update the channel list when the broadcaster adds new services or if you move the TV to a new location. Press the ENTER/OK button to select Auto Store. Press the ENTER/OK button again to start the search. When it has finished, the number of scanned services will be displayed. The existing favourite channel list will not be deleted when the channel list is updated. To stop the scan before it has finished, press the ENTER/OK button with Stop selected. If the signal status is poor, No service found! Check the aerial connection. message is displayed.

English - 42

3:40:32
Setup This menu consists of 9 sub-menus: Menu Transparency, Parental Lock, Subtitle, Subtitle Mode, Digital Text, Time Zone, Audio Format, and System. 4.1 Menu Transparency You can set the translucency of the on-screen menu. Press the or button to select required option (High, Medium, Low, or Opaque), then press the ENTER/OK button.
Setup Menu Transparency : Medium Parental Lock Subtitle Subtitle Mode Audio Format Move Enter Setup Menu Transparency : Medium High Medium Parental Lock Low Subtitle : On Opaque Subtitle Mode : Normal Audio Format Move Enter Setup Menu Transparency : Medium Parental Lock Subtitle Subtitle Mode Audio Format Move Enter Parental Lock Enter PIN Return : On : Normal : PCM Return : PCM Return : On : Normal : PCM
4.2 Parental Lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by a 4-digit PIN (Personal Identification Number) code that is defined by the user. The on-screen menu will instruct you to assign a PIN code (you can change it later, if necessary). Enter your current 4-digit PIN code by using the numeric buttons (0~9). The Parental Lock menu are displayed with the Parental Rating selected. The default PIN code for a new TV set is 0000. If you enter an invalid PIN code, the Invalid PIN code. Please try again. message is displayed. Press the ENTER/OK button. Press the or button to select the age rating you want to lock out, then press the ENTER/OK button. If you want to change the PIN code, press the or button to select Change PIN, then press the ENTER/OK button. Enter your new PIN code by using the numeric buttons (0~9). The Confirm New PIN is displayed. Re-enter your new PIN code to confirm by using the numeric buttons (0~9). The Your PIN code has been changed successfully message is displayed. If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to 0-0-0-0: POWER (Off) MUTE 4 POWER (On).

Enter PIN

Change PIN Enter New PIN

English - 43

3:40:34
Setup 4.3 Subtitle / Subtitle Mode / Audio Format / Digital Text You can use various settings to suit your personal preferences. Menu Transparency : Medium Press the or button to select required menu (Subtitle, Parental Lock Subtitle Mode, Digital Text or Audio Format), then press Subtitle : On the ENTER/OK button. The options of the selected menu Subtitle Mode : Normal are displayed. Audio Format : PCM Press the or button to select required option, then press the ENTER/OK button. Move Enter Return Subtitle : On / Off Setup You can select these options simply by pressing the SUBTITLE button on the remote control. Menu Transparency : Medium Subtitle Mode : Normal (basic subtitle) / Hard of hearing Parental Lock (subtitle for a hearing-impaired person) Subtitle : On Off If the programme you are watching does not support On Subtitle Mode : Normal the Hard of hearing function, Normal automatically Audio Format : PCM activates even though Hard of hearing mode is selected. Move Enter Return Audio Format Setup You can only hear Dolby Digital sound through the audio Menu Transparency : Medium receiver connected through an optical cable. You can only Parental Lock hear PCM sound through the main speaker. Subtitle : On When sound is emitted from both the main speaker and the Subtitle Mode : Normal audio receiver, a sound echo may occur due to the decoding Audio Format : PCM speed difference between the main speaker and the audio receiver. In this case, use the internal mute function. Even if you have selected PCM or Dolby Digital in Audio Move Enter Return Format, when the input signals are any format of PCM and Dolby Digital, the input format is applied regardless of the setting. If the input signals are not any of those, the setting is not applied. Digital Text : Enable / Disable (UK only) If the programme is broadcast with digital text, this feature is enabled. MHEG (Multimedia and Hypermedia Information Coding Experts Group)? An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various fields including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing, digital libraries and network games. 4.4 Time Zone (Spain only) Setup You can select the time zone where you are located. This menu is only enabled when you select a country Digital Text supported by the time zone. Time Zone

English - 46

3:40:38
What is Anynet+? (PS42Q96HD/PS42Q97HD/PS50Q96HD/PS50Q97HD)
Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are connected.
Connecting Anynet+ Devices
The Anynet+ system supports AV devices supporting Anynet+ only. Check if there is an Anynet+ mark on the AV device to be connected to the TV. To directly connect to TV
Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device 3
Connect the [HDMI 1], [HDMI 2] or [HDMI 3] jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using the HDMI cable.
To connect to Home Theater
TV Anynet+ Device 1 Anynet+ Device 2
HDMI Cable Home Theater HDMI Cable Anynet+ Device 3
Connect the [HDMI 1], [HDMI 2] or [HDMI 3] jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using the HDMI cable. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using the HDMI cable.

HDMI Cable Optical Cable

only the optical Connect the receiver. cable between [Digital Audio Out (Optical)] on your TV and Digital Audio Input on Connect only one receiver. listen to 5.1 channel sound through the home theaters speakers. Otherwise, can only You can 2 channel stereo sound in other cases. Make sure to connect the Digital Audioyou (Optical) of listen to IN the home theater and the TV correctly to listen to TV sound through the home theater. However, you cannot listen to sound from the BD recorder that is sent to the home theater via the TV in 5.1 channel sound because the TV outputs only 2 channel stereo sound. Please see the manual for the home theater. You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions. Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status. Anynet+ supports up to 8 AV devices in total.

English - 47

3:40:39

Setting Up Anynet+

The following settings are to use Anynet+ functions. Using the Anynet+ Function Press the Anynet+ button. Press the or button to select Setup, then press the ENTER/OK button. Press the ENTER/OK button to select Anynet+ (HDMI-CEC), then press the ENTER/OK button. Press the or button to select On, then press the ENTER/ OK button. The Anynet+ (HDMI-CEC) function is enabled. If you select Off, Anynet+ (HDMI-CEC) is disabled. When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.

English - 48

3:40:41
Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu View TV Select Device Record Menu on Device Device Operation Receiver Setup Description Switches from Anynet+ to TV broadcast mode. Your TV connects to the corresponding device. Starts a recording. (This menu works only for a device supporting recording.) Shows the menu of the connected device. Example. When a DVD Recorder is connected, the DVD Recorders title menu appears. Shows the play control menu of the connected device. Example. When a DVD Recorder is connected, the play control menu of the DVD Recorder appears. Sound is output through the receiver. You can set the environment for using Anynet+.
TV Remote Control Buttons Available in Anynet+ Mode Device Type Operating Status After switching to the device, when the menu of the corresponding device is displayed on the screen. After switching to the device, while playing a file Device with built-in Tuner Audio Device Anyview2 After switching to the device, when you are watching a TV program When Receiver is activated When watching TV Available Buttons Numeric buttons ////ENTER buttons Color buttons EXIT button (Backward search) (Forward search) (Stop) (Play/Pause) CH / button VOL +/- button MUTE button (Play/Pause)

Anynet+ Device

The Anynet+ function only works when the remote control is set to TV. REC button works only while in The cannot control Anynet+ devices the recordable state. the side of the TV. You can control Anynet+ using You only using the TV remote control. the buttons on devices The TV remote control may not work under certain conditions. In this case, re-select the Anynet+ device. dont operate for The Anynet+ functionscolor buttons may the products from other manufacturers. mode, the not work properly. In Anynet+ operations may differ depending on the device. The , Recording
You can make a recording of a TV program using a recorder. Press the REC button. Recording begins. (Only when the Anynet+ enabled recording device is connected.) The current TV program is recorded in the Watching TV status. If you are watching video from another device, the video from the device is recorded. You can also record the source streams by selecting Record after pressing the Anynet+ button. Before recording, check whether the antenna jack is properly connected to the recording device. For the antenna connection to the recording device, refer to its user manual.

English - 49

Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker. 1 Press the Anynet+ button. TV P1 Press the or button to select Receiver, then press the ENTER/OK button. View TV 2 Press the or button to select to On, then press the Select Device ENTER/OK button. Record Now you can listen to sound through the receiver. Menu on Device 3 Press the EXIT button to exit. Device Operation When the receiver is set to On, you can listen to the TV sound Receiver :On through the 2-channel receiver. Setup If the receiver is exclusively for a home theater only (supporting Move Enter audio only), it may not appear in the device list. Exit Only when you have connected the optical jack of the TV and the receiver properly, does Receiver work. In case of a content with copyright problem, listening through the receiver may not properly operate. When listening through the receiver, there are restrictions for using the PIP and audio-related menu.
Check Points before Requesting Service
Symptom Anynet+ does not work.

I want to start Anynet+.

I want to exit Anynet+.
The Connecting to Anynet+ device message appears on the screen.
The Anynet+ device does not You cannot use the play function when Plug & Play is in progress. play. The connected device is not Check whether or not the device supports Anynet+ functions. displayed. Check whether or not the HDMI cable is properly connected. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Search Anynet+ devices again. You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ functions. The TV program cannot be Check whether the antenna jack on the recording device is properly recorded. connected. The TV sound is not output Connect the optical cable between TV and the receiver. through the receiver.

English - 50

Solution Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. Connect only one receiver. Check if the Anynet+ device power cord is properly connected. Check the Anynet+ devices Video/Audio/HDMI cable connections. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Check whether the TV remote control is in TV mode. Check whether it is Anynet+ exclusive remote control. Anynet+ doesnt work at a certain condition. (Searching channels) When connecting or removing the HDMI cable, please make sure to search devices again or restart your TV. Check if the Anynet+ Function of Anynet+ device is set on. Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. Press the TV button on the TV remote control to switch to TV. Then press the Anynet+ button to show the Anynet+ menu and select a menu you want. Select View TV in Anynet+ menu. Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. Press any of CH, CH LIST, and PRE-CH to change to the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. Use the remote control when the Anynet+ setting or switching to view mode is complete.

Entering the page number Selecting a title in a list Selecting a coloured heading (FASTEXT system)
Press the TV/DTV button to exit from the teletext display.

English - 52

3:40:46
Installing the Wall Mount Kit
This installation is to be used when attaching the wall mount to a wall. When attaching to other building materials, please contact your nearest dealer. Wall Mount Kit Specifications (VESA)

Product Family

inch 23 ~ ~ ~ 42 ~ 50 63
VESA Spec. (A * B) 200 * * * * * 400 No VESA
Standard Screw (C * D) M4 * L10 M6 * L10 M8 * L15 M8

Quantity 4 6

LCD-TV

PDP-TV 3 4

We provide the standard dimensions for wall mount kits as shown in the table above. When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set. Our 63 model does not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for this model.

English - 53

3:40:47
Setting Up Your Remote Control
After it has been set up properly, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes. Setting Up the Remote to Operate Your VCR 1 Turn off your VCR. 2 Press the VCR button on your TVs remote control. 3 Press the SET button on your TVs remote control. 4 Using the number buttons on your remote control, enter three digits of the VCR code listed on page 56 of this manual for your brand of VCR. Make sure you enter three digits of the code, even if the first digit is a 0. (If more than one code is listed, try the first one.) 5 Press the POWER button on the remote control. Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of VCR. If no other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR When your remote control is in VCR mode, the volume buttons still control your TVs volume.
Setting Up the Remote to Operate Your Cable Box 1 Turn off your cable box. 2 Press the CABLE button on your TVs remote control. 3 Press the SET button on your TVs remote control. 4 Using the number buttons on your remote control, enter three digits of the cable box code listed on page 57 of this manual for your brand of cable box. Make sure you enter three digits of the code, even if the first digit is a 0. (If more than one code is listed, try the first one.) 5 Press the POWER button on the remote control. Your cable box should turn on if your remote is set up correctly. If your cable box does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of cable box. If no other codes are listed, try each code, 000 through 046.