Reviews & Opinions
Independent and trusted. Read before buy Acer Ferrari 3000!

Acer Ferrari 3000

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Acer Ferrari 3000 Laptop & Notebook, size: 3.7 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Acer Ferrari 3000Acer Ferrari 3000LMi - Athlon XP-M 1.86 GHz - 15″ - 512 MB Ram - 60 GB HDD

1400 x 1050 - Acer - Windows XP - Touchpad - With DVD Drive - AMD CPU - Notebook - 60 GB disk

The Ferrari 3000 from Acer is the only notebook to sport Ferrari Red, a globally recognized color signifying passion, power, style and success. Indeed, the Ferrari 3000 is a striking symbol of cooperation between Acer and Ferrari, each of which has a reputation for technology, innovation and performance The full-featured Ferrari 3000 boasts wireless connectivity, dedicated video graphics plus generously sized memory and hard drive. The mobile AMD Athlon XP-M processor 2500+ functions at high spe... Read more

 

[ Report abuse or wrong photo | Share your Acer Ferrari 3000 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 4. Page 1 of 1. Average Rating:
bialio 10:46pm on Sunday, September 26th, 2010 
well it looks very good and it sounds good,i think this is the one i want,so im going to start saving now!! x hello this Acer Ferrari 3000LMi - Athlon XP-M 2500+ 1.86 GHz - 15" TFT Notebook is a very excellent Laptop and it looks very good.
iceberg1414 4:42am on Sunday, June 20th, 2010 
Never Judge a book by its cover Everything about this beauty called out to me when I first saw it on the internet a couple of months back.
petrnikolaevich 12:27am on Wednesday, May 12th, 2010 
Mine had bought a new Acer computer and when we wanted to watch videos or listen to music the sound on it was like a whisper even at full volumn. High performance, good looks. Heats up very quickly.
da1308ve 2:05pm on Thursday, April 29th, 2010 
Never Judge a book by its cover Everything about this beauty called out to me when I first saw it on the internet a couple of months back.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Table of Contents

Chpater 1 System Specifications 1
Features.1 System Block Diagram.3 Board Layout.4 Top View.4 Bottom View.5 Outlook View.6 Front Open View.6 Front Panel.7 Left Panel.8 Right Panel.9 Rear Panel.10 Bottom Panel.11 Indicators.12 Using the Keyboard.13 Lock Keys.13 Embedded Numeric Keypad.14 Windows Keys.15 Hot Keys.16 The Euro Symbol.18 Launch Keys.19 Touchpad.20 Touchpad Basics.20 Hardware Specifications and Configurations.22

Chapter 2

System Utilities
BIOS Setup Utility.31 Navigating the BIOS Utility.32 Info.33 Main.34 Advanced.36 Security.38 Boot.42 Exit.43 BIOS Flash Utility.44 System Diagnostic Diskette.44

Chapter 3

Machine Disassembly and Replacement
General Information.46 Before You Begin.46 Disassembly Procedure Flowchart.47 Removing the Battery Pack.50 Removing the Optical Module/HDD Module/ Wireless Lan Card and LCD module.51 Removing the Optical Module.51 Removing the HDD Module.51 Removing the Wireless LAN Card.51 Removing the LCD Module.52 Disassembling the Main Unit.53 Remove the function key board and the keyboard.53 Separate the main unit into the logic upper and the logic lower assembly.53 Disassembling the logic upper assembly.54 Disassembling the logic lower assembly.55 Disassembling the LCD Module.57
Disassembling the External Modules.59 Disassembling the HDD Module.59 Disassembling the Optical Drive Module.59

Chapter 4

Troubleshooting
System Check Procedures.62 External Diskette Drive Check.62 External CD-ROM Drive Check.62 Keyboard or Auxiliary Input Device Check.62 Memory check.63 Power System Check.63 Touchpad check.64 Power-On Self-Test (POST) Error Message.65 Index of Error Messages.66 POST Codes.68 Index of Symptom-to-FRU Error Message.72 Intermittent Problems.76 Undetermined Problems.77

Chpater 5

Jumper and Connector Locations
Top View.79 Bottom View.80
Chapter 6 Appendix A Appendix B Appendix C Index
FRU (Field Replaceable Unit) List Model Definition and Configuration Test Compatible Components Online Support Information

Exploded Diagram.82

Ferrari 3000 Series.90
Microsoft Windows XP Home Environment Test.92

Chapter 1

System Specifications

Features

This computer was designed with the user in mind. Here are just a few of its many features:

Performance

AMDTM XP-M processor at available in 2500+ and higher Memory upgradeable up to 2GB with 2 slots (only one slot for user accessible) Internal removable DVD drive (AcerMedia bay) High-capacity, Enhanced-IDE hard disk Li-Ion main battery pack Microsoft Windows XP operating system

Display

Thin-Film Transistor (TFT) liquid-crystal display (LCD) displaying 32-bit high colour up to 1400X1050 Super eXtended Graphics Array (SXGA+) resolution for 15.0 3D graphics engine Simultaneous LCD and CRT display support S-video for output to a television or display device that supports S-video input Automatic LCD dim feature that automatically decides the best settings for your display and conserves pwer DualViewTM

Microphone Launch keys

Front Panel

Icon Speaker

Item Outputs sound.
Description Reads cards from Smart Media, Memory Stick, MultiMedia, and Secure Digital cards. Displays activity of 4-in-1 memory reader. Interfaces with infrared devices (e.g., infrared printer, IR-aware computer).

4-in-1 memory reader

4-in-1 status indicator1 Infrared port
Bluetooth button2 Bluetooth indicator2
Starts Bluetooth functionality. Indicates that (optional) Bluetooth is enabled.
InviLink button3 InviLink indicator
Enables or disables wireless connectivity. Indicates status of wireless communication
Latch for opening and closing the laptop.
NOTE: 1. 2. 3. Four-in-one card reader is manufacturing option, subject to configuration. Only one card can operate at any given time. Bluetooth button and indicator work on models with Bluetooth only. InviLink button and indicator work on models with wireless LAN only.

Left Panel

Item Four (4) USB ports
Description Connect to Universal Serial Bus devices (e.g., USB mouse, USB camera).

IEEE 1394 port

Connects to IEEE 1394 devices.

PC Card slot

The slot supports a standard Type II CardBus PC Card.
PC Card eject button Line-in jack
Ejects the PC Card from the slot. Accepts audio line-in devices (e.g., audio CD player, stereo walkman).

Microphone jack

Accepts input from external microphone.
Headphone/Speaker/ Line-out jack
Connects to headphones or other line-out audio devices (speakers).

Right Panel

Item Optical drive
Description Depending on your model, the optical drive is one of the following: DVD-ROM drive for reading CDs and DVDS. DVD/CD-RW combo drive for reading CDs and DVDs and writing to CD-RWs. DVD dual for reading both DVD+/- RWs and writing to DVD+/- RWs.
Optical disc access indicator Optical drive eject button Optical drive emergency eject hole Power jack
LED that indicates when an optical disc is being read or written. Press the eject button to remove a disc from the optical drive. Used to eject an optical disc when the computer is turned off. Connects to an AC adapter.

Rear Panel

Item Modem jack
Description Connects to a phone line.

Network jack

Connect to an Ethernet 10/100-based network.

Parallel port

Connects to a parallel device (e.g., parallel printer).

External display port

Connects to a display device (e.g., external monitor, LCD projector).

S-video

Connects t a television or display device with S-video input.

Security keylock

Connects to a Kensington-compatible computer security lock.

Bottom Panel

Item Battery bay Battery release latch Battery lock Mini-PCI slot Hard disk protector Hard disk bay Memory compartment Cooling fan
Description Houses the computers battery pack. Unlatches the battery to remove the battery pack. Locks the battery in place. Slot for adding mini-PCI cards. Protects the hard disk from accidental bumps and vibration. Houses the computers hard disk (secured by a screw). Houses th computers main memory. Helps keep the computer cool. Note: Dont cover or obstruct the opening of the fan.
Personal identification slot
Insert a business card or similar-sized indentification card to presonalize your computer.

Indicators

The computer has three easy-to-read status indicators below the display screen. And two on the front of the computer.
The Power and Battery status indicators are visible even when the display is closed.
Icon Function Caps lock Description Lights when Caps Lock is activated.

Num lock

Lights when Num Lock is activated.

Media Activity

Lights when the disc or optical drive is activated.
Lights gree when the power is on and orange when the computer is in standby mode. Lights orange when the battery is charging.

Battery

Using the Keyboard
The full-sized keyboardincludes an embedded numeric keypad, separate cursor keys, two Windows keys and twelve function keys.

Lock Keys

The keyboard has three lock keys which you can toggle on and off.

Lock Key Caps Lock

Description When Caps Lock is on, all alphabetic characters are typed in uppercase. Toggle on and off by pressing the Caps Lock key on the left of the keyboard. When Num Lock is on, the embedded numeric keypad can be used. Toggle on and off by pressing the Fn + F11 keys simultaneously. When Scroll Lock is on, the screen moves one line up or down when you press w and y respectively.
Num lock (Fn-F11) Scroll lock (Fn-F12)

Embedded Numeric Keypad

The embedded numeric keypad functions like a desktop numeric keypad. It is indicated by small characters located on the upper right corner of the keycaps. To simplify the keyboard legend, cursor-control key symbols are not printed on the keys.

Select Drag

Access context menu

Click once

Function Scroll

Left Button

Scroll Button Click and hold the button in the desired direction (up/ down/left/right)
NOTE: Keep your fingers dry and clean when using the touchpad. Also keep the touchpad dry and clean. The touchpad is sensitive to finger movements. Hence, the lighter the touch, the better the response. Tapping too hard will not increase the touchpads responsiveness.
Hardware Specifications and Configurations

Processor

Item CPU type CPU package CPU core voltage AMD Athlon
Specification XP-M processor 2500+ and higher

OPGA package 1.60V/1.65V

Item BIOS vendor BIOS Version BIOS ROM type BIOS ROM size BIOS package Supported protocols Phneoix V1.00 Flash ROM 512KB PLCC ACPI 1.0b,PC Card 95, SM BIOS 2.3, EPP/IEEE 1284, ECP/IEEE 1284 1.7 & 1.9, PCI 2.2, PnP 1.0a, DMI 2.0, PS/2 keyboard and mouse, USB 2.0, VGA BIOS, CD-ROM bootable, IEEE 1394 Set by setup manual Specification

BIOS password control

Second Level Cache
Item Cache controller Cache size 1st level cache control 2st level cache control Cache scheme control Built-in CPU 512KB Always enabled Always enabled Fixed in write-back Specification

System Memory

Item Memory controller Memory size DIMM socket number Supports memory size per socket Supports maximum memory size Supports DIMM type Supports DIMM Speed Supports DIMM voltage Supports DIMM package Memory module combinations AMD Athlon 2 sockets 1024MB 2048MB (by two 1024MB SO-DIMM module) DDR Synchronous DRAM 333 MHz 2.5V 200-pin soDIMM You can install memory modules in any combinations as long as they match the above specifications.
Specification XP-M built-in

0MB (no on-board memory)

Memory Combinations
Slot 1 0MB 0MB 0MB 256MB 256MB 256MB 512MB 512MB 512MB 1024MB 1024MB 1024MB 256MB 512MB 1024MB 256MB 512MB 1024MB 256MB 512MB 1024MB 256MB 512MB 1024MB Slot 2 256MB 512MB 1024MB 512MB 768MB 1280MB 768MB 1024MB 1536MB 1280MB 1536MB 2048MB Total Memory
NOTE: Above table lists some system memory configurations. You may combine DIMMs with various capacities to form other combinations. On above table, the configuration of slot 1 and slot 2 could be reversed. LAN Interface
Item Chipset Supports LAN protocol LAN connector type LAN connector location VT6103 10/100 Mbps RJ45 Rear panel Specification

Parameter Serial Number UUID Number UUID=32bytes
Description This field displays the serial number of this unit.
The Main screen displays a summary of your computer hardware information, and also includes basic setup parameters. It allows the user to specify standard IBM PC AT system parameters.
Item Specific Help System Time: System Date: System Memory: Extended Memory: VGA Memory: Quiet Boot: Power on display: LCD Auto Dim: Wakeup from LAN F12 Boot Menu [00:00:00] [10/15/2003] 640 KB 128MB Shows system memory size VGA memory size <Tab>, <Shift-Tab>, or <Enter> selects field.
238 MB Shows extended memory size
[Enabled] [Auto ] [Enabled] [Disabled] [Disabled]
NOTE: The screen above is for reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
Parameter System Time System Date
Description Sets the system time. Sets the system date.
Format/Option Format: HH:MM:SS (hour:minute:second) System Time Format MM/DD/YYYY (month/day/ year) System Date
System Memory Extended Memory
This field reports the memory size of the system. Memory size is fixed to 640MB This field reports the memory size of the extended memory in the system. Extended Memory size=Total memory size-1MB Shows the VGA memory size. The default value is set to 32MB Determines if Customer Logo will be displayed or not; shows Summary Screen is disabled or enabled. Enabled: Customer Logo is displayed, and Summary Screen is disabled. Disabled: Customer Logo is not displayed, and Summary Screen is enabled. Option:32/64MB Option: Enabled or Disabled

Video Memory Quiet Boot

Power on display
Auto: During power process, the system will detect if any display device is connected on external video port. If any external display device is connected, the power on display will be in CRT (or projector) only mode. Otherwise it will be in LCD only mode. Both: Simultaneously enable both the integrated LCD screen and the systems external video port (for an external CRT or projector).

Option: Auto or Both

LCD Auto Dim
Determines if the system will automatically dim the LCD brightness in order to save power when AC is not present.
Option: Enabled or Disabled
NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases.

Advanced

The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced settings of the system.
Parallel port: Mode: Base I/O address: Interrupt: DMA channel
[Enabled] [Bi-direct] [378] [IRQ 7] [DMA3]

Item Specific Help

Configure Infrared Port using options: [Auto] Disable the touchpad if an external PS/2 mouse is connected. Otherwise enable the touchpad
[Both] The touchpad is always enabled. Any external PS/2 mouse connected will be enabled at the same time.
F5/F6 Change Values Enter Select 4 Sub- Menu

Esc Exit

The table below describes the parameters in the screen. Settings in boldface are the default and suggested parameter settings.
Parameter Serial Port Parallel Port Mode Base I/O address
Description Enables, disables or auto detects the serial port. Enables, disables or auto detects the parallel port. Sets the operation mode of the parallel port. Sets the I/O address of the parallel port. This parameter is enabled only if Mode is set to ECP or Bi-directional. This parameter is enabled only if Mode is set to ECP. Sets the interrupt request of the parallel port. Sets a DMA channel for the printer to operate in ECP mode. This parameter is enabled only if Mode is set to ECP.

Options

Enabled/Disabled/Auto Enabled/Disabled/Auto ECP, EPP, Normal or Bi-directional 378h/278h/3BCH

Interrupt DMA channel

IRQ7/IRQ5 DMA3/DMA1
Parameter Internal Touchpad Infrared Port (FIR)
Description Determines whether or not to disable the internal pointing device as the PS/2 mouse is connected. Enables, disables or auto detects the infrared port.
Both or Auto Disabled/EnabledDisabled/Auto

Security

The Security screen contains parameters that help safeguard and protect your computer from unauthorized use.
Item Specific Help User Password is Supervisor Password is Primary HardDisk Security Set User Password Set Supervisor Password Set HDD Password Password on boot: Clear Clear Clear [Enter] [Enter] [Enter] [Enabled] Supervisor Password controls accesses of the whole setup utility. It can be used to boot up when Password on boot is enabled.

Hx2 HDD Door

Hx2 Dimm Door

Ox4 Middle Cover

Hx2 PCI Door ODD Module

HDD Module

Memory

Hx2 Mx3 Keyboard

Sx4 LCD Module

Hx3 Function Key Board

Wireless LAN Card

Main Unit Assembly

Cx4 ODD Bracket

Fx2 ODD Board ODD

Front Bezel

Sx19 Hx2 Ux3

Logic Upper Assembly
Logic Lower Assembly Ax4 Hx1 Hx1 Main Board

Qx4 Touchpad Shielding

Touchpad Board Dx3 Hx4 Touchpad Holder Tx2 CPU Touchpad Touchpad Cable (FFC) HDD Bracket Dimm 4-in-1 Card Rearder Fx2 Smart Card Reader Hx1 Top Cover Shielding
Hx2 Modem/ Bluetooth Combo Card

Ex4 Thermal Module

Antenna Line

Modem Cable

LCD Module

6 LCD Cushions

Jx6 LCD Bezel

LCD Inverter

LCD Assembly

LCD Panel

Hx4 Dx4 LCD LCD Coaxial Cable LCD Brackets Wireless Antenna Hx2 LCD Latch Kit Bracket

Dx1 LCD Latch Kit

Screw List
Item A B C D E F G H I J K NUT-I/O SCREW M1.6X4.0-I-NI-NYLOK SCREW M2.0X2.5-I-NI-NYLOK SCREW M2.0X3.0-I-NI-NYLOK SCREW M2.0X3.5-I-NI-NYLOK SCREW M2.0X5-I-NI-NYLOK SCREW M2.5X3-I-NI-NYLOK SCREW M2.5X4.0-B-NI-NYLOK SCREW M2.5X4-I-NYLOK SCREW M2.5X5.0-I-NI-NYLOK SCREW M2.5X5.5-P-NI-NYLOK Description

Item L M N O P Q R S T U

Description SCREW M2.5X0.45+7I-NYLOK SCREW M1.7X3.5-I-BZN SCREW M2X3-I-BNI-NYLOK SCREW M2.0X5.0-I-BNI-NYLOK SCREW M2.0X6.0-I-NI-NYLOK SCREW M2.5X2-I-NI-NYLOK SCREW M2.5X4-I-BNI SCREW M2.5X7 SCREW M3.0X3.5 SCREW M2.5X5 (BLACK)
Removing the Battery Pack
1. 2. Release the battery lock. Slide the battery latch then remove the battery.
Removing the Optical Module/HDD Module/Wireless Lan Card and LCD module
Removing the Optical Module
1. 2. Slide the optical disk drive latch. Remove the ODD module.

Removing the HDD Module

1. 2. 3. Remove the two screws holding the HDD cover. Remove the HDD cover. Remove the HDD module.
Removing the Wireless LAN Card
1. 2. 3. Remove the screw that secures the PCI door then remove the PCI door. Disconnect the right and the left wireless antenna. Pop out the wireless LAN card then remove it.

Removing the LCD Module

1. 2. 3. Remove the four screws that secures the middle cover; two one each side. Detach middle cover with the assistance of a plastic flat head screw driver. Disconnect the LCD cable then take out the cable from the upper case.

4. 5. 6.

Disconnect the left wireless LAN antenna line. Then take out the antenna from the upper case with a tweezers. Unscrew the four screws holding the LCD hinges; two on each side. Then remove the entire LCD module.

After you use the touchpad, the pointer drifts on the screen for a short time. This self-acting pointer movement can occur when a slight, steady pressure is applied to the touchpad pointer. This symptom is not a hardware problem. No service actions are necessary if the pointer movement stops in a short period of time.
Power-On Self-Test (POST) Error Message
The POST error message index lists the error message and their possible causes. The most likely cause is listed first. NOTE: Perform the FRU replacement or actions in the sequence shown in FRU/Action column, if the FRU replacement does not solve the problem, put the original part back in the computer. Do not replace a non-defective FRU. This index can also help you determine the next possible FRU to be replaced when servicing a computer. If the symptom is not listed, see Undetermined Problems on page 77. The following lists the error messages that the BIOS displays on the screen and the error symptoms classified by function. NOTE: Most of the error messages occur during POST. Some of them display information about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the way it has been configured. NOTE: If the system fails after you make changes in the BIOS Setup Utility menus, reset the computer, enter Setup and install Setup defaults or correct the error.

Index of Error Messages

Error Message List
Error Messages Struck Key System CMOS checksum bad - Default configuration used Real time clock error RTC battery Run BIOS Setup Utility to reconfigure system, then reboot system. RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. Main board Previous boot incomplete - Default configuration used Invalid System Configuration Data Operating system not found Load Default Settings in BIOS Setup Utility. RTC batter Main baord. Load Default Settings in BIOS Setup Utility. Main board. Enter Setup and see if fixed disk and drive A are properly identified. Dikette drive Hard disk drive Main board. FRU/Action in Sequence See Keyboard or Auxiliary Input Device Check on page 62
No beep Error Messages Power-on indicator turns off and LCD is blank. FRU/Action in Sequence Power source (battery pack and power adapter.) See Power System Check on page 63 Ensure every connector is connected tightly and correctly. Reconnect the DIMM. Main board. Power-on indicator turns on and LCD is blank. Power source (battery pack and power adapter.) See Power System Check on page 63 Reconnect the LCD connector Hard disk drive LCD cable LCD inverter LCD Main board Power-on indicator turns on and LCD is blank. But you can see POST on an external CRT. Reconnect the LCD connectors. LCD cable LCD inverter LCD Main board Power-on indicator turns on and a blinking cursor shown on LCD during POST. Ensure every connector is connected tightly and correctly. Main board

POST Codes

Code 02h 03h 04h 06h 08h 09h 0Ah 0Bh 0Ch 0Eh 0Fh 10h 11h 12h 13h 14h 16h 17h 18h 1Ah 1Ch 20h 22h 24h 26h 28h 29h 2Ah 2Ch 2Eh 2Fh 30h 32h 33h 36h 38h 3Ah 3Ch 3Dh 42h 45h 46h 2-1-2-3 1-4-1-1 1-3-4-1 1-3-4-3 1-3-1-1 1-3-1-3 1-2-2-3 Beeps POST Routine Description Verify Real Mode Disable Non-Maskable Interrupt (NMI) Get CPU type Initialize system hardware Initialize chipset with initial POST values Set IN POST flag Initialize CPU registers Enable CPU cache Initialize caches to initial POST values Initialize I/O component Initialize the local bus IDE Initialize Power Management Load alternate registers with initial POST values Restore CPU control word during warm boot Initialize PCI Bus Mastering devices Initialize keyboard controller BIOS ROM checksum Initialize cache before memory autosize 8254 timer initialization 8237 DMA controller initialization Reset Programmable Interrupt Controller Test DRAM refresh Test 8742 Keyboard Controller Set ES segment register to 4 GB Enable A20 line Autosize DRAM Initialize POST Memory Manager Clear 215 KB base RAM RAM failure on address line xxxx RAM failure on data bits xxxx of low byte of memory bus Enable cache before system BIOS shadow RAM failure on data bits xxxx of high byte of memory bus Test CPU bus-clock frequency Initialize Phoenix Dispatch Manager Warm start shut down Shadow system BIOS ROM Autosize cache Advanced configuration of chipset registers Load alternate registers with CMOS values Initialize interrupt vectors POST device initialization Check ROM copyright notice
Code 48h 49h 4Ah 4Bh 4Ch 4Eh 50h 51h 52h 54h 58h 59h 5Ah 5Bh 5Ch 60h 62h 64h 66h 67h 68h 69h 6Ah 6Bh 6Ch 6Eh 70h 72h 76h 7Ch 7Eh 80h 81h 82h 83h 84h 85h 86h 87h 88h 89h 8Ah 8Bh 8Ch 2-2-3-1
POST Routine Description Check video configuration against CMOS Initialize PCI bus and devices Initialize all video adapters in system QuietBoot start (optional) Shadow video BIOS ROM Display BIOS copyright notice Display CPU type and speed Initialize EISA board Test keyboard Set key click if enabled Test for unexpected interrupts Initialize POST display service Display prompt Press F2 to enter SETUP Disable CPU cache Test RAM between 512 and 640 KB Test extended memory Test extended memory address lines Jump to User Patch1 Configure advanced cache registers Initialize Multi Processor APIC Enable external and CPU caches Setup System Management Mode (SMM) area Display external L2 cache size Load custom defaults (optional) Display shadow-area message Display possible high address for UMB recovery Display error messages Check for configuration errors Check for keyboard errors Set up hardware interrupt vectors Initialize coprocessor if present Disable onboard Super I/O ports and IRQs Late POST device initialization Detect and install external RS232 ports Configure non-MCD IDE controllers Detect and install external parallel ports Initialize PC-compatible PnP ISA devices Re-initialize onboard I/O ports Configure Motherboard Configurable Devices (optional) Initialize BIOS Area Enable Non-Maskable Interrupts (NMIs) Initialize Extended BIOS Data Area Test and initialize PS/2 mouse Initialize floppy controller

Code 8Fh 90h 91h 92h 93h 95h 96h 97h 98h 99h 9Ah 9Ch 9Dh 9Eh 9Fh A0h A2h A4h A8h AAh ACh AEh B0h B2h B4h B5h B6h B9h BAh BBh BCh BDh BEh BFh C0h C1h C2h C3h C4h C5h C6h C7h C8h C9h D2h 1 1-2
POST Routine Description Determine number of ATA drives (optional) Initialize hard-disk controllers Initialize local-bus hard-disk controllers Jump to UserPatch2 Build MPTABLE for multi-processor boards Install CD ROM for boot Clear huge ES segment register Fixup Multi Processor table Search for option ROMs. One long, two short beeps on checksum failure. Check for SMART drive (optional) Shadow option ROMs Set up Power Management Initialize security engine (optional) Enable hardware interrupts Determine number of ATA and SCSI drives Set time of day Check key lock Initialize Typematic rate Erase F2 prompt Scan for F2 key stroke Enter SETUP Clear Boot flag Check for errors POST done- prepare to boot operating system One short beep before boot Terminate QuietBoot (optional) Check password (optional) Prepare Boot Initialize DMI parameters Initialize PnP Option ROMs Clear parity checkers Display MultiBoot menu Clear screen (optional) Check virus and backup reminders Try to boot with INT 19 Initialize POST Error Manager (PEM) Initialize error logging Initialize error display function Initialize system error handler PnPnd dual CMOS (optional) Initialize notebook docking (optional) Initialize notebook docking late Force check (optional) Extended checksum (optional) Unknown interrupt
Code E0h E1h E2h E3h E4h E5h E6h E7h E8h E9h EAh EBh ECh EDh EEh EFh F0h F1h F2h F3h F4h F5h F6h F7h 1
For Boot Block in Flash ROM Initialize the chipset Initialize the bridge Initialize the CPU Initialize the system timer Initialize system I/O Check force recovery boot Checksum BIOS ROM Go to BIOS Set Huge Segment Initialize Multi Processor Initialize OEM special code Initialize PIC and DMA Initialize Memory type Initialize Memory size Shadow Boot Block System memory test Initialize interrupt vectors Initialize Run Time Clock Initialize video Initialize System Management Mode Output one beep before boot Boot to Mini DOS Clear Huge Segment Boot to Full DOS
Index of Symptom-to-FRU Error Message

Undetermined Problems

The diagnostic problems does not identify which adapter or device failed, which installed devices are incorrect, whether a short circuit is suspected, or whether the system is inoperative. Follow these procedures to isolate the failing FRU (do not isolate non-defective FRU). NOTE: Verify that all attached devices are supported by the computer. NOTE: Verify that the power supply being used at the time of the failure is operating correctly. (See Power System Check on page 63): 1. 2. 3. Power-off the computer. Visually check them for damage. If any problems are found, replace the FRU. Remove or disconnect all of the following devices: Non-Acer devices Printer, mouse, and other external devices Battery pack Hard disk drive DIMM PC Cards 4. 5. 6. 7. Power-on the computer. Determine if the problem has changed. If the problem does not recur, reconnect the removed devices one at a time until you find the failing FRU. If the problem remains, replace the following FRU one at a time. Do not replace a non-defective FRU: System board LCD assembly

Chapter 5

R30 R31 HOLE14 O I G
M L D E F GH I J K L S D MN
U5 CN1 CN4 CN3 CN2 CN2 CN5 CN7 CN15

C117 C118 E E C124

CN16 CN17 CN19 U15 CN20 CON1 CN14 CN9-11 CN13
DIMM socket Keyboard connector Main battery connector IR HDD connector PCMCIA slot IEEE 1394 port Four USB ports

D25 C918

RP95 T88 T87 T89

C C C617

C475 C474 C473 C472 C471 C470 C469 C468 C467 C466 C465 C459 C458 C457 C456 C455 C454 C453 C452

PR124 PR125 C837 PC139

O G PC147 PR137 PC148 PD20 PC141 PR130 PR129

D19 R519 T83

PC120 R526

R418 R417 C859

R481 R480 R479

R468 R496 R513

C791 T92

R414 C971 C666 C663 R498

E D D 12
C902 T93 C855 Q40 R490 C839 C843 C845

O G I PQ39 PD16

PCPD18

PR91 PQ43

CN26 CN28
PR90 PR92 PC96 PR98 PR107 PC111 PR115 PQ41 PR102 PR109 PR111 PR117 PQ40 C643

C559 C619

R416 PC100 PD17 PC109 PR113 PC113

L78 C618 C627 C626

PU10 PR114 PD19 I G PR145

M DL D I S D

JP15 G C930 C933 C935 C938 R576 C948 C723 I

H H 2 O Q45 G I G O U41

C942 C944 C946 C947 C904 U40

Chapter 6

FRU (Field Replaceable Unit) List
This chapter gives you the FRU (Field Replaceable Unit) listing in global configurations of Ferrari 3000 series products. Refer to this chapter whenever ordering for parts to repair or for RMA (Return Merchandise Authorization). Please note that WHEN ORDERING FRU PARTS, you should check the most up-to-date information available on your regional web or channel. For whatever reasons a part number change is made, it will not be noted on the printed Service Guide. For ACER AUTHORIZED SERVICE PROVIDERS, your Acer office may have a DIFFERENT part number code from those given in the FRU list of this printed Service Guide. You MUST use the local FRU list provided by your regional Acer office to order FRU parts for repair and service of customer machines. NOTE: To scrap or to return the defective parts, you should follow the local government ordinance or regulations on how to dispose it properly, or follow the rules set by your regional Acer office on how to return it. NOTE: Exploded diagram is not ready as service CD released. We will update the service guide to CSD website, please download the exploded diagram from the website if you need the files

Exploded Diagram

Picture Adapter NS ADAPTER LITE- ON PA-1900-05QA 3PIN W/ LED 90W ADAPTER LSE 0202C1990 3PIN W/LED 90W AP.A1003.001 AP.A1007.001 No. Partname And Description Part Number
Battery 13 BATTERY SANYO LI-ION 8CELL (4UR18650F2-QC-ZG1, 4400mAH) BATTERY SIMPLO LI-ION 8CELL (LI-ION BATTERY PACK ZG14S2P, 4400mAH) BT.FR103.001 BT.FR107.001
Boards NS MODEM CARD (Ambit T60M283.10) 54.T29V7.001
MODEM /BLUETOOTH COMBO BOARD AMBIT T60M665.00

54.T23V7.002

WIRELESS LAN BOARD (802.11g) WNC KM8-1 54.A13V7.001

LAUNCH BOARD

55.T23V7.001

TOUCH PAD BOARD W/CABLE

55.T23V7.002

Cables

Picture NS
Partname And Description TOUCHPAD CABLE

Part Number 50.T23V7.001

MODEM CABLE

50.T23V7.002

COVER SWITCH CABLE

50.T23V7.003

NS NS NS NS NS NS NS Case/Cover/Bracket Assembly 3
POWER CORD US (3 pin) POWER CORD EU ( 3 Pin) POWER CORD PRC ( 3 Pin) POWER CORD UK (3 PIN) POWER CORD ITALIAN (3 PIN) POWER CORD DANISH (3 PIN) POWER CORD AU (3 PIN) MIDDLE COVER W/ NAME PLATE
27.A03V7.001 27.T23V7.002 27.T23V7.003 27.A03V7.004 27.A03V7.005 27.A03V7.006 27.A03V7.008 42.FR1V7.001

DIMM DOOR W/SCREW

42.FR1V7.002

LOWER CASE W/O SPEAKER

60.FR1V7.001
UPPER CASE W/TOUCHPAD HOLDER

60.FR1V7.002

I/O BRACKET W/MICROPHONE

33.FR1V7.001

Partname And Description FRONT BEZEL FOR 4 IN 1 MODEL

Part Number 42.T23V7.003

FRONT BEZEL FOR NON-4 IN 1 MODEL TOUCH PAD SHIELDING FOR TOUCH PAD BOARD
42.T23V7.103 33.T23V7.001
TOUCH PAD BRACKET FOR TOUCH PAD

33.T23V7.002

WIRELESS BOARD COVER

42.FR1V7.003

Communication Module NS NS BLUETOOTH ANTENNA WIRELESS LAN ANTENNA Y CABLE 50.T23V7.004 50.A13V7.001

WIRELESS LAN ANTENNA

50.A13V7.002
CPU NS HDD/ Hard Disk Drive 12 HDD 2.5" 30G HGST MORAGA IC25N030ATMR04-0 08K0910 2.5" KH.03007.002 AMD Athlon XP Barton 2500+(1.8GHz) 40W Low-Voltage OPGA KC.A2502.40W
HDD 2.5" 30G TOSHIBA NEPTUNE MK3021GAS

KH.33004.001

Picture
Partname And Description HDD 2.5" 30G FUJITSU V-40 MHT2030AT 4.2KRPM F/W:009A HDD 2.5" 40G HGST MORAGA IC25N040ATMR04-0 08K0633 HDD 2.5" 40G TOSHIBA NEPTUNE MK4025GAS F/W:KA100A HDD 2.5" 40G FUJITSU V40+ MHT2040AT 4.2KRPM F/W:0021 HDD 2.5" 60G HGST MORAGA IC25N060ATMR04-0 08K0634 HDD 2.5" 60G TOSHIBA NEPTUNE MK6021GAS HDD 2.5" 60G FUJITSU V40+ MHT2060AT 4.2KRPM F/W:0021

USB Memory:

USB DRIVE 128MB Panasonic SUPER DISK \ LKRF235U

USB LAN:

Billionton USB-10/100 FastEthernet BUFFALO USB-10/100M Ethernet LUX-TX

USB Zip:

IOMEGA USB ZIP 100 IOMEGA USB ZIP 250

USB Scanner:

HP ScanJet 5300c

USB Speaker:

Philips USB Speaker (DIGITAL Speaker System)

USB HUB:

PCI_USB HUB\UH-400

USB Gamepad:

Logitech WingMan GAMEPAD EXTREME Logitech WingMan EXTREME DIGITAL 3D Logitech WingMan RUMBLEPAD

USB Card Reader:

Iwill 6 in 1 Card Reader Pro Compact Flash Card Reader

Item Audio Jacks

Speaker
DENON Amplifier (AMP) AVR-1802 LOUDSPEAKER Gateway Speaker

Earphone:

AIWA HP-X121 Earphone PHILIPS Earphone NEC Earphone e STEREO DYNAMIC HEADPHONES E-750 Pro. 2 DYNAMIC HEADPHONES PH-B333G Panasonic Stereo Headphones \ RP-H1245 DELL harman/kardon Microphone Audio Jack AIWA Mini Microphone Condenser MIC. EM-420T JS-100 Jazz 3D Speaker SONY Earphone MDR-CD60 Microsoft microphone Microphone Condenser Microphone Dynamic Microphone

Appendix C

Online Support Information
This section describes online technical support services available to help you repair your Acer Systems. If you are a distributor, dealer, ASP or TPM, please refer your technical queries to your local Acer branch office. Acer Branch Offices and Regional Business Units may access our website. However some information sources will require a user i.d. and password. These can be obtained directly from Acer CSD Taiwan. Acer's Website offers you convenient and valuable support resources whenever you need them. In the Technical Information section you can download information on all of Acer's Notebook, Desktop and Server models including: Service guides for all models User's manuals Training materials Bios updates Software utilities Spare parts lists TABs (Technical Announcement Bulletin) For these purposes, we have included an Acrobat File to facilitate the problem-free downloading of our technical material. Also contained on this website are: Detailed information on Acer's International Traveler's Warranty (ITW) Returned material authorization procedures An overview of all the support services we offer, accompanied by a list of telephone, fax and email contacts for all your technical queries. We are always looking for ways to optimize and improve our services, so if you have any suggestions or comments, please do not hesitate to communicate these to us.

Index A

ACPI 1.0a 22 AFLASH Utility 44 Audio 25 Battery Pack 48 CD-ROM/DVD-ROM Module 53 Floppy Disk Drive 57 Procedure Flowchart 47 Display 3

 

Technical specifications

Full description

The Ferrari 3000 from Acer is the only notebook to sport Ferrari Red, a globally recognized color signifying passion, power, style and success. Indeed, the Ferrari 3000 is a striking symbol of cooperation between Acer and Ferrari, each of which has a reputation for technology, innovation and performance The full-featured Ferrari 3000 boasts wireless connectivity, dedicated video graphics plus generously sized memory and hard drive. The mobile AMD Athlon XP-M processor 2500+ functions at high speed but with low power consumption and was developed exclusively for this notebook. The Ferrari 3000 makes a stylish statement about its owner while providing performance to spare.

General
Recommended UseHome use, small business
System TypeNotebook
Built-in DevicesStereo speakers
Width13 in
Depth10.7 in
Height1.3 in
Weight6.4 lbs
ColorRed
Processor
ProcessorAMD Athlon XP-M 2500+ / 1.86 GHz
Chipset TypeVIA ProSavage KN400
Cache Memory
TypeL2 cache
Installed Size512 KB
RAM
Installed Size512 MB / 2 GB (max)
TechnologyDDR SDRAM - 333 MHz
Memory Specification CompliancePC2700
Storage Controller
TypeIDE
Storage
Hard Drive60 GB
Optical Storage
TypeDVD±RW - integrated
Read Speed24x (CD) / 8x (DVD)
Write Speed16x (CD) / 2x (DVD-R) / 2.4x (DVD+R)
Rewrite Speed10x (CD) / 2x (DVD-RW) / 2.4x (DVD+RW)
Display
Display Type15" TFT
Max Resolution1400 x 1050 ( SXGA+ )
Widescreen DisplayNo
Color Support24-bit (16.7 million colors)
Video
Graphics Processor / VendorAGP 8x - ATI Mobility Radeon 9200
Video Memory128 MB DDR SDRAM
Audio
Audio OutputSound card
Compliant StandardsSound Blaster, AC '97
Audio InputMicrophone
Input Device(s)
TypeMouse, keyboard, touchpad, 4-way scroll button
Telecom
ModemFax / modem
Max Transfer Rate56 Kbps
Protocols & SpecificationsITU V.92
Networking
NetworkingNetwork adapter
Wireless LAN SupportedYes
Data Link ProtocolEthernet, Fast Ethernet, Bluetooth, IEEE 802.11g
Compliant StandardsIEEE 802.11g
Expansion / Connectivity
Expansion Slots Total (Free)2 ( 0 ) x memory 1 ( 1 ) x CardBus - type II 1 ( 1 ) x SD Memory Card 1 ( 1 ) x SmartMedia Card 1 ( 1 ) x Memory Stick
Interfaces1 x display / video - VGA - 15 pin HD D-Sub (HD-15) 1 x display / video - S-video output 1 x headphones - output - mini-phone stereo 3.5 mm 1 x microphone - input - mini-phone 3.5 mm 4 x Hi-Speed USB - 4 pin USB Type A 1 x parallel - IEEE 1284 (EPP/ECP) - 25 pin D-Sub (DB-25) 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45 1 x modem - phone line - RJ-11 1 x infrared - IrDA 1 x IEEE 1394 (FireWire)
Miscellaneous
FeaturesAdministrator password, system password, wake on LAN
Power
Power DeviceExternal
Power Provided90 Watt
Battery
TechnologyLithium ion
Installed Qty1 / 1 (max)
Run Time (Up To)3 hour(s)
Operating System / Software
OS ProvidedMicrosoft Windows XP Home Edition
SoftwareAdobe Acrobat Reader, Cyberlink PowerDVD , Acer System Recovery, Acer Launch Manager, NTI CD-Maker, Norton AntiVirus (OEM)
Universal Product Identifiers
BrandAcer
Part NumberLX.FR105.023
GTIN00099802160555

 

Tags

FMS11 CS-21Z57ML GFA-5800 MP-375SD LM-230A Tecumseh HSK Camaro 1996 NAD C740 WF-T556 1 0 SCR-187 TX-L55 RE370 Laserfax 935 770-TFT KDL-46EX709 Jx50B Calculator F1025 YP-55V HQ6920 16 LE23T51B VP-D372WH Dr-m10 5nikkor Bakery 7703 Pyramid CR82 SE551 KX-TG5521E 32 KW Tecra M5 UX-G300 Manual Mli 330XI RHT2660DA Concord 5040 KV-28FX66E MX200 P4410 Cartridges ENB35405S LE37B550a5W PN-465E FAX-L295 SP0822N Handheld PDP4211 85 SD MFC-9600 Pixma IP90 RL41ecsw SGH-T749 MDS-501 FO-B1600 275 Dect FM40AH V193W LE40B620 SH-E66 Powershot SD20 I915gmie Speakers Surround Link Picooz Ericsson Z780 F1DP116A Ultra Zoom Laptop Kawai CA93 DSR-1 Bolido 4565 Nav III Explorist 400 Battery Frontier-2004 Shotgun DSP-A590 Digital HT-S9305THX 1350 04 Garmin 260 P-793H V2 28DG21C L50840 AT8 32X TL-WA601g 108M Wireless X1400 DRW-1000 HC3100 Keyboard A3110 Programchart Samsung S852 Sudoku 37LG6000 Stgt650 SA-WD200 Xdma6330 WF8804RP Nextra6 Drivers Gr-ax230 2-1-0 FDF502

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101