LED indicator Emergency eject slot
Icon Eject button Speaker

Item/ Port

Description Ejects the optical drive tray from the drive. Delivers stereo audio output.

Right Panel

Icon Speaker
Item/ Port Floppy activity indicator Floppy drive Floppy disk eject button Security keylock
Description Delivers stereo audio output. LED (light-emitting diode) that turns on and off when the floppy is active. Internal diskette drive; accepts 3.5-inch diskettes. Push this button to eject the floppy disk. Connects to a Kensington-compatible computer security lock.

Rear Panel

Port Power Jack
Description Connects to an AC adapter

Parallel port

Connects to a parallel device (e.g., parallel printer) Connects to a display device (e.g., external monitor, LCD projector) and displays up to 16M colors at 1024x768 resolution Connects to any Universal Serial Bus devices(e.g., USB mouse, USB camera). Connects to an Ethernet 10/100-based network Connects to the phone line

External display port

USB port (four)

Network jack

Modem jack

Line-in jack

Accepts audio line-in devices (e.g., audio CD player, stereo walkman). Connects to audio line-out devices (e.g., speakers, headphones).
Speaker/Headphoneout jack

Bottom Panel

# 3 Battery bay
Item Battery release latch Memory compartment
Description Houses the computers battery pack. Unlatches the battery to remove the battery pack. Houses the computers main memory.

Indicators

The computer has six easy-to-read status icons on the right of the display screen.
The Power and Standby status icons are visible even when you close the display cover so you can see the status of the computer while the cover is closed.

Icon Power

Function
Description Lights when the computer is on.
Lights when the computer enters Standby mode and blinks when it enters into or resumes from hibernation mode. Lights when the floppy drive, hard disk or optical drive is active. Lights when the battery is being charged.

Media Activity

Battery Charge

Caps Lock

Lights when Caps Lock is activated.

Num Lock (Fn-F11)

Lights when Numeric Lock is activated.

Understanding the icons

When the cover of your computer is closed, 2 easy-to-read icons are shown, indicating which state or feature is enabled or disabled.

Item Vendor & model name Performance Specification Transfer rate (KB/sec) Read Sustained: DVD-ROM MAX 8X CAV (MAX 10800 KB/sec) CD-ROM Write: CD-R CD-RW HS-RW ATAPI Interface: PIO mode 16.6 MB/sec :PIO Mode 4 DMA mode 16.6 MB/sec:Multi word mode 2 Ultra DMA mode 33.3MB/sec: Ultra DMA mode 2 Buffer rate Access time Start up time Stop time Acoustic noise Interface Master/Slave PC compatible Applicable disc format 2MB DVD-ROM 180 ms typ. (1/3 stroke) CD-ROM 130 ms typ. (1/3 stroke) less than 15s less than 6s less than 50 dBA Enhanced IDE (ATAPI) compatible Set by Cable Select (By host) PC2001 compatible CD: CD-DA, CD-ROM, CD-ROM XA, CD-R, CD-RW, PhotoCD (multiSession), Video CD, CD-Extra(CD+), CD-text DVD: DVD-ROM, DVD-R, DVD-RW (Ver.1.1) Slope Dimensions, Weight 15 degree (Any direction) 128X129X12.7mm (WXDXH) (except protrusion) 200g+- 10g Eject Soft Eject (with emergency eject hole) 4X, 8X (CLV), Max 16X, MAX 24X (ZCLV) 4X (CLV) 4X,8X, 10X (CLV) MAX 24X CAV (MAX 3600 KB/sec) KME UJDA740 Specification

Audio Interface

Item Audio Controller Audio onboard or optional Mono or Stereo Resolution Compatibility Mixed sound source Cirrus Logic CS4299-XQ Built-in Stereo 20 bit stereo Digital to Analog converter 18 bit stereo Analog to Digital converter Microsoft PC98/PC99, AC97 2.1 Line-in, CD, Video, AUX Specification
Item Voice channel Sampling rate Internal microphone Internal speaker / Quantity Supports PnP DMA channel Supports PnP IRQ 8/16 bit, mono/stereo 44.1 KHz Yes Yes DMA channel 0 DMA channel 1 IRQ10, IRQ11 Specification

Video Interface

Item Vendor & Model Name Chip voltage Supports ZV (Zoomed Video) port Graph interface Maximum resolution (LCD) Maximum resolution (CRT) Core / 2.5V, 1.5V, NO 4X AGP (Accelerated Graphic Port) Bus 1024 x768 (32bit colors) 1024x768 (32 bit colors) 1280x1024 (32 bit colors) 1600x1200 (32 bit colors) Specification Intel 845GME (Montara-GT)

Video Memory

Item Fixed or upgradeable Video memory size 8MB Specification Fixed, share the system memory

Video Resolutions Mode

I/O Address Map

I/O Address 00000000-0000000F 00000000-00000CF7 00000020-00000021 00000024-00000025 00000028-00000029 0000002C-0000002D 0000002E-0000002F 00000030-00000031 Direct Memory Access controller PCI bus Programmable interrupt controller Programmable interrupt controller Programmable interrupt controller Programmable interrupt controller Motherboard resources Programmable interrupt controller Function
I/O Address 00000034-00000035 00000038-00000039 0000003C-0000003D 00000040-00000043 00000050-00000053 00000060-00000060 00000061-00000061 00000062-00000062 00000064-00000064 00000065-00000065 00000066-00000066 00000067-00000067 00000072-00000077 00000080-00000080 00000081-0000008F 00000090-00000091 00000092-00000092 00000093-0000009F 000000A0-000000A1 000000A4-000000A5 000000A8-000000A9 000000AC-000000AD 000000B0-000000B5 000000B8-000000B9 000000BC-000000BD 000000C0-000000DF 000000F0-000000F0 00000170-00000177 000001F0-000001F7 00000274-00000277 00000279-00000279 00000376-00000376 00000378-0000037F 000003B0-000003BB 000003C0-000003DF 000003F0-000003F5 000003F6-000003F6 000003F7-000003F7 000004D0-000004D1 00000600-00000060F 00000700-0000070F 00000778-0000077F 00000800-0000080F 00000A79-00000A79 00000D00-0000FFFF Function Programmable interrupt controller Programmable interrupt controller Programmable interrupt controller System Timer System Timer Standard 101/102-key or Microsoft Natural PS/2 keyboard Motherboard resources Microsoft ACPI-Compliant Embedded Controller Standard 101/102-key or Microsoft Natural PS/2 keyboard Motherboard resources Microsoft ACPI-Compliant Embedded Controller Motherboard resources System CMOS/real time clock Motherboard resources Direct memory access controller Direct memory access controller Motherboard resources Direct memory access controller Programmable interrupt controller Programmable interrupt controller Programmable interrupt controller Programmable interrupt controller Programmable interrupt controller Programmable interrupt controller Programmable interrupt controller Direct memory access controller Numeric data processor Secondary IDE channel Primary IDE channel ISAPNP Read Data Report ISAPNP Read Data Report Secondary IDE channel ECP Printer Port (LPT1) Intel (R) 82845G Graphic Controller Intel (R) 82845G Graphic Controller Standard floppy disk controller Primary IDE channel Standard floppy disk controller Programmable interrupt controller Motherboard resources Motherboard resources ECP Printer Port (LPT1) Motherboard resources ISAPNP Read Data Report PCI bus
I/O Address 00001000-0000107F 00001180-000011BF 00001800-00001807 00001810-0000181F 00001820-0000183F 00001840-0000185F 00001860-0000187F 00001880-0000189F 000018C0-000018FF 00001C00-00001CFF 00002000-0000207F 00002400-000024FF 00003000-000030FF 0000FC00-0000FCFF 0000FD00-0000FDFF 0000FE00-0000FEFF 0000FF00-0000FFFF Motherboard resources Motherboard resources Intel (R) 82850/82855 GM/GME Graphics Controller Intel (R) 82801DB/DBM Ultra ATA Storage Controller-24CA Intel (R) 82801DB/DBM USB Universal Host Controller-24C2 Intel (R) 82801DB/DBM USB Universal Host Controller-24C4 Intel (R) 82801DB/DBM USB Universal Host Controller-24C7 Intel (R) 82801DB/DBM SMBus Controller-24C3 Crystal WDM AC97 Driver for ICH4 Crystal WDM AC97 Driver for ICH4 Agere Systems AC97 Modem Agere Systems AC97 Modem Realtek RTL8139/810x Family Fast Ethernet NIC Texas Instruments PCI-1520 CardBus Controller Texas Instruments PCI-1520 CardBus Controller Texas Instruments PCI-1520 CardBus Controller Texas Instruments PCI-1520 CardBus Controller Function

Option

Clear or Set Clear or Set

Set Supervisor Password

Primary Harddisk Security

Disabled or Enabled

Password on Boot
NOTE: When you are prompted to enter a password, you have three tries before the system halts. Dont forget your password. If you forget your password, you may have to return your notebook computer to your dealer to reset it.

Setting a Password

Follow these steps as you set the user or the supervisor password: 1. Use the w andy keys to highlight the Set Supervisor Password parameter and press the e key. The Set Supervisor Password box appears:
Type a password in the Enter New Password field. The password length can not exceeds 8 alphanumeric characters (A-Z, a-z, 0-9, not case sensitive). Retype the password in the Confirm New Password field.
IMPORTANT:Be very careful when typing your password because the characters do not appear on the screen. 3. 4. 5. Press e. After setting the password, the computer sets the User Password parameter to Set. If desired, you can opt to enable the Password on boot parameter. When you are done, press u to save the changes and exit the BIOS Setup Utility.

Removing a Password

Follow these steps: 1. Use the w and y keys to highlight the Set Supervisor Password parameter and press the e key. The Set Password box appears:

2. 3. 4.

Type the current password in the Enter Current Password field and press e. Press e twice without typing anything in the Enter New Password and Confirm New Password fields. The computer then sets the Supervisor Password parameter to Clear. When you have changed the settings, press u to save the changes and exit the BIOS Setup Utility.

Changing a Password

1. Use the w and y keys to highlight the Set Supervisor Password parameter and press the e key. The Set Password box appears:

2. 3. 4. 5. 6.

Type the current password in the Enter Current Password field and press e. Type a password in the Enter New Password field. Retype the password in the Confirm New Password field. Press e. After setting the password, the computer sets the User Password parameter to Set. If desired, you can enable the Password on boot parameter. When you are done, press u to save the changes and exit the BIOS Setup Utility.
If the verification is OK, the screen will display as following.
The password setting is complete after the user presses u.

This chapter contains step-by-step procedures on how to disassemble the notebook computer for maintenance and troubleshooting. To disassemble the computer, you need the following tools: Wrist grounding strap and conductive mat for preventing electrostatic discharge Flat-bladed screw driver Phillips screw driver Tweezers Plastic Flat-bladed screw driver Hexed Screw Driver NOTE: The screws for the different components vary in size. During the disassembly process, group the screws with the corresponding components to avoid mismatch when putting back the components.

General Information

Before You Begin
Before proceeding with the disassembly procedure, make sure that you do the following: 1. 2. Turn off the power to the system and all peripherals. Unplug the AC adapter and all power and signal cables from the system.
Disassembly Procedure Flowchart
The flowchart on the succeeding page gives you a graphic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.
*2 HDD Module *2 Dimm Cover
*1 Modem Cover Hinge Caps
*2 HDD HDD Holder Memory Modem Board

*2 Middle Cover

*6 Keyboard LCD Module

*2 Launch Board

*3 *3 *11 *4

RTC Battery

*3 Mini PCI Card Plate
*4 Lower Case Assembly Upper Case Assembly Disconnect W ireless LAN Antenna Thermal Module

*2 FDD Module

*4 W ireless LAN Antenna Touchpad Cover W ireless LAN Card CPU
*4 ODD Module HDD Bracket

*1 ODD Support Bracket

*1 CPU Heatsink Plate
*3 VGA Heatsink Plate Touchpad Button Pad
*2 *4 ODD Bracket ODD Main Board Touchpad Touchpad Scroll Key

*2 DC Board

*4 PCMCIA Slot Touchpad Cable Upper Case

*2 Speaker Set

LCD Module

4 LCD Cushions

*4 LCD Bezel

*1 Inverter

LCD Panel
*4 LCD Coaxial Cable LCD Brackets

Screw List

Item A B C D E F G H I J Description SCREW MAC FLAT M2.5*L4 NI NYLOK (86.00123.630) SCREW M2.0*L10 NYLOK(86.9A352.100) SCREW M2*3 NYLON 1JMCPC420325(86.9A352.3R0) SCREW M2.5X6(86.9A353.6R0) SCREW M3x4 (86.9A524.4R0) SCREW M2X2.0 (86.9A552.2R0) SCREW WAFER NYLOK NI 2ML3 (86.9A552.3R0) SCRW M2*4 WAFER NI (86.9A552.4R0) SCRW M2.5*3 WAFER NI (86.9A553.3R0) SCREW M2.5*4L NI (86.9A553.4R0)

Removing the Battery

1. 2. To remove the battery, push the battery release latch. Then slide the battery out from the machine.
Removing the Memory Module
1. 2. See Removing the Battery on page 52. To remove the memory module from the machine, first remove the two screws holding the dimm cover.

Remove the dimm cover.

Remove the touchpad cover, the remove the touchpad button pad. Finally remove the touchpad board from the upper case.
Removing the Touchpad Cable
1. 2. See Removing the Battery on page 52. See Removing the Middle Cover on page 56. 66

3. 4. 5. 6. 7.

See Removing the LCD Module on page 57. See Removing the Keyboard on page 63. See Removing the Upper Case Assemly on page 65. See Removing the Touchpad Board on page 66. Remove the touchpad scroll key then remove the touchpad cable.
Removing the Floppy Disk Drive Module
1. 2. 3. 4. 5. See Removing the Middle Cover on page 56. See Removing the LCD Module on page 57. See Removing the Keyboard on page 63. See Removing the Upper Case Assemly on page 65. Disconnect the FDD cable from the main board.
Remove the two screws hastening the FDD module. Detach the FDD module from the lower case.
Dissembling the Floppy Disk Drive Module
1. 2. Disconnect the FDD cable. Remove the two screws that fasten the FDD bracket on one side.
Remove another two screws holding the FDD bracket on the other side. Then take the FDD off the FDD bracket.
Removing the VGA Heatsink Plate
1. 2. 3. 4. 5. See Removing the Battery on page 52. See Removing the Middle Cover on page 56. See Removing the Keyboard on page 63. See Removing the Floppy Disk Drive Module on page 67. Remove the three screws that secure the VGA heatsink plate then remove the plate.
Removing the CPU Heatsink Plate
1. 2. 3. 4. 5. See Removing the Battery on page 52. See Removing the Middle Cover on page 56. See Removing the Keyboard on page 63. See Removing the Floppy Disk Drive Module on page 67. Remove the screw that fastens the CPU heatsink plate then remove it.
Removing the ODD Module(1)
1. 2. See Removing the Battery on page 52. Remove the screw that fastens the ODD bracket on the bottom. Push the ODD module at the point the red arrow indicates hard.Then remove the ODD module from the lower case.
NOTE: If you need to replace the ODD module only, you can remove the ODD module as the steps above.
Removing the ODD Module(2)

Place the right hinge to the LCD panel. Fasten the right hinge with one screw.
Installing the LCD Coaxial Cable
1. 2. See Installing the LCD Hinges on page 95. Connect the LCD coaxial cable and fasten with mylar. Fasten the LCD coaxial cable with mylar.
Installing the LCD Brackets
1. 2. 3. See Installing the LCD Hinges on page 95. See Installing the LCD Coaxial Cable on page 95. Attach the left bracket to the LCD. Then secure the left LCD bracket with four screws.
Attach the right bracket to the LCD. Fasten the right LCD bracket with four screws.
Installing the 15 TFT LCD
1. 2. 3. 4. See Installing the LCD Hinges on page 95. See Installing the LCD Coaxial Cable on page 95. See Installing the LCD Brackets on page 95. Place the LCD to the LCD panel.
Secure the left hinge with two screws. Fasten the right hinge with two screws.
Installing the Inverter Board (15 LCD)
1. 2. 3. See Installing the LCD Hinges on page 95. See Installing the LCD Coaxial Cable on page 95. See Installing the LCD Brackets on page 95. 84
See Installing the 15 TFT LCD on page 96. Connect the inverter cable to the inverter board. Connect the inverter board to the LCD.
Secure the inverter board with one screw.

Installing the LCD Bezel

1. 2. 3. 4. 5. 6. See Installing the LCD Hinges on page 95. See Installing the LCD Coaxial Cable on page 95. See Installing the LCD Brackets on page 95. See Installing the 15 TFT LCD on page 96. See Installing the Inverter Board (15 LCD) on page 96. Attach the LCD bezel to the LCD module.
Fasten the LCD bezel with the four screws. Then cover the four screw pads.
Installing the LCD Module
1. Place the LCD module to the main unit.
Fasten the LCD module with the two screws on the bottom; one on the right and another one on the left.
Secure the LCD hinge with the four screws; two on the right and two on the left.
Connect the inverter cablet to the main board. Connect the LCD coaxial cable to the maine board. Then fasten the LCD coaxial cable with one screw.
Installing the Launch Board
1. Attach the launch board to the middle cover. Then secure the launch board with the two screws as the picture shows.
Installing the Middle Cover
1. 2. See Installing the Launch Board on page 99. Connect the launch board cable to the launch board.
Attach the middle cover to the main unit carefully. Then close the LCD panel and fasten the middle cover with your fingers on its ridge.
Secure the middle cover with one screw as the picture shows. Then attach the left hinge cap.
Secure the middle cover with one screw on another side as the picture shows. Then attach the right hinge cap.

If an error occurs with the internal diskette drive, reconnect the diskette connector on the system board. If the error still remains: 1. 2. 3. Reconnect the external diskette drive/DVD-ROM module. Replace the external diskette drive/CD-ROM module. Replace the main board.
External CD-ROM Drive Check
Do the following to isolate the problem to a controller, drive, or CD-ROM. Make sure that the CD-ROM does not have any label attached to it. The label can cause damage to the drive or can cause the drive to fail. Do the following to select the test device: 1. 2. 3. 1. 2. 3. Boot from the diagnostics diskette and start the diagnostics program. See if CD-ROM Test is passed when the program runs to CD-ROM Test. Follow the instructions in the message window. Reconnect the external diskette drive/CD-ROM module. Replace the external diskette drive/CD-ROM module. Replace the main board.
If an error occurs, reconnect the connector on the System board. If the error still remains:
Keyboard or Auxiliary Input Device Check
Remove the external keyboard if the internal keyboard is to be tested. If the internal keyboard does not work or an unexpected character appears, make sure that the flexible cable extending from the keyboard is correctly seated in the connector on the system board. If the keyboard cable connection is correct, run the Keyboard Test. If the tests detect a keyboard problem, do the following one at a time to correct the problem. Do not replace a non-defective FRU: 1. 2. 3. Reconnect the keyboard cables. Replace the keyboard. Replace the main board.
The following auxiliary input devices are supported by this computer: Numeric keypad External keyboard If any of these devices do not work, reconnect the cable connector and repeat the failing operation. 95 TravelMate 240/ 250

Memory check

Memory errors might stop system operations, show error messages on the screen, or hang the system. 1. 2. 3. Boot from the diagnostics diskette and start the doagmpstotics program (please refer to main board. Go to the diagnostic memory in the test items. Press F2 in the test items.
4. Follow the instructions in the message window. NOTE: Make sure that the DIMM is fully installed into the connector. A loose connection can cause an error.

Index of Error Messages

Error Code List
Error Codes 006 Causes: 1. CPU BIOS Update Code Mismatch 2. IDE Primary Channel Master Drive Error (THe causes will be shown before Equipment Configuration Error) 110 <No error code> Memory Error at xxxx:xxxx:xxxxh (R:xxxxh, W:xxxxh) Real Time Clock Error CMOS Battery Bad CMOS Checksum Error System disabled. Incorrect password is specified. Battery critical LOW In this situation BIOS will issue 4 short beeps then shut down system, no message will show. <No error code> Thermal critical High In this situation BIOS will shut down system, not show message. Error Messages Equipment Configuration Error

Error Message List

Error Messages Failure Fixed Disk FRU/Action in Sequence Reconnect hard disk drive connector. Load Default Settings in BIOS Setup Utility. Hard disk drive System board Stuck Key Keyboard error Keyboard Controller Failed Keyboard locked - Unlock key switch Monitor type does not match CMOS - Run Setup Shadow RAM Failed at offset: nnnn System RAM Failed at offset: nnnn Extended RAM Failed at offset: nnnn System battery is dead - Replace and run Setup System CMOS checksum bad - Default configuration used System timer error see Keyboard or Auxiliary Input Device Check on page 95. see Keyboard or Auxiliary Input Device Check on page 95. see Keyboard or Auxiliary Input Device Check on page 95. Unlock external keyboard Run Load Default Settings in BIOS Setup Utility. BIOS ROM System board DIMM System board DIMM System board Replace RTC battery and Run BIOS Setup Utility to reconfigure system time, then reboot system. RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. System board
Error Messages Real time clock error RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. System board Previous boot incomplete - Default configuration used Memory size found by POST differed from CMOS Diskette drive A error Run Load Default Settings in BIOS Setup Utility. RTC battery System board Run Load Default Settings in BIOS Setup Utility. DIMM System board Check the drive is defined with the proper diskette type in BIOS Setup Utility See External Diskette Drive Check on page 95. Incorrect Drive A type - run SETUP System cache error - Cache disabled CPU ID: DMA Test Failed Software NMI Failed Fail-Safe Timer NMI Failed Device Address Conflict Check the drive is defined with the proper diskette type in BIOS Setup Utility System board System board DIMM System board DIMM System board DIMM System board Run Load Default Settings in BIOS Setup Utility. RTC battery System board Allocation Error for device Run Load Default Settings in BIOS Setup Utility. RTC battery System board Failing Bits: nnnn DIMM BIOS ROM System board Fixed Disk n Invalid System Configuration Data I/O device IRQ conflict None BIOS ROM System board Run Load Default Settings in BIOS Setup Utility. RTC battery System board Operating system not found Enter Setup and see if fixed disk and drive A: are properly identified. Diskette drive Hard disk drive System board FRU/Action in Sequence

Part Number 55.T30V1.002

MODEM BOARD 56K AMBIT T60M283.10

54.09011.542

Cables TOUCHPAD CABLE 50.T30V1.001

COVER SWITCH CABLE

50.T30V1.002

LAUNCH CABLE

50.T30V1.011

MODEM CABLE

50.41T11.002
POWER CORD US (3 pin) Case/Cover/Bracket Assembly 3 MINI PCI CARD PLATE W/RTC HOLDER
27.01618.051 60.T30V1.003

HINGE CAP RIGHT

42.T30V1.002

Picture 8

Partname And Description HINGE CAP LEFT

Part Number 42.T30V1.003

OPTICAL DRIVE SUPPORT BRACKET

33.T30V1.001

HDD BRACKET

33.T30V1.002

HDD HOLDER

33.T30V1.003

LOWER CASE W/ DIMM COVER & MODEM COVER & SPEAKERS

60.T30V1.004

MODEM COVER W/SCREW

42.T30V1.004

DIMM COVER W/SCREW

42.T30V1.005

UPPER CASE W/O COVER SWITCH CABLE & TOUCHPAD MODULE

60.T30V1.001

Partname And Description TOUCHPAD COVER

Part Number 42.T30V1.006

MIDDLE COVE W/LAUNCH BOARD

60.T30V1.005

Communication Module WIRELESS ANTENNA RIGHT (BLACK) 50.T30V1.004
WIRELESS ANTENNA LEFT (GRAY)

50.T30V1.005

CPU INTEL CELERON PORTABILITY 2.6 GHZ 128K 400FSB for TM240 INTEL CELERON PORTABILITY 2.5 GHZ 128K 400FSB for TM240 INTEL CELERON PORTABILITY 2.4 GHZ 128K 400FSB for TM240 INTEL CELERON PORTABILITY 2.3 GHZ 128K 400FSB for TM240 INTEL CELERON PORTABILITY 2.2 GHZ 128K 400FSB for TM240 INTEL CELERON PORTABILITY 2.0GHZ 128K 400FSB for TM240 INTEL MOBILE PENTIUM 4 PORTABILITY 3.06GHZ 512K 1.53V for TM250 INTEL MOBILE PENTIUM 4 PORTABILITY 2.8GHZ 512K 1.53V for TM250 INTEL MOBILE PENTIUM 4 PORTABILITY 2.66GHZ 512K 1.53V for TM250 INTEL MOBILE PENTIUM 4 PORTABILITY 2.4GHZ 512K 1.53V for TM250 FDD/Floppy Disk Drive KC.NCP01.26G KC.NCP01.25G KC.NCP01.24G KC.NCP01.23G KC.NCP01.22G KC.NCP01.20G KC.NP001.306

KC.NP001.2G8

KC.NP001.266

KC.NP001.2G4

No. 13
Partname And Description FDD MODULE 1.44M MCI JU226A033FC FDD MODULE 1.44M MITSUMI D353G 4515
Part Number 6M.T30V1.003 6M.T30V1.004
FDD DRIVE 1.44M MCI JU226A033FC FDD DRIVE 1.44M MITSUMI D353G 4515
KF.T3007.001 KF.T3006.001

FDD BRACKET

33.T30V1.005

FDD CABLE

50.T30V1.003
HDD/ Hard Disk Drive HDD 20GB 2.5" 4200RPM HGST MORAGA IC25N020ATMR04-0 08K0632 HDD 20GB/2.5 IN./4200 RPM/IBM CASCADE IC25N020ATCS04-0 07N8325 HDD 20GB/2.5 IN./4200RPM/ HITACHI EUCALYPTUS DK23EA HDD 20GB 2.5" 4200RPM TOSHIBA NEPTUNEV20 MK2023GAS HDD 30GB/2.5 IN./4200RPM/ HITACHI EUCALYPTUS DK23EA/ 30 HDD 30GB 2.5" 4200RPM FUJITSU V-40 MHT2030AT HDD 30GB 2.5" 4200RPM HGST MORAGA IC25N030ATMR04-0 HDD 30GB/2.5 IN./4200RPM/ TOSHIBA NEPTUNE MK3021GAS HDD 40GB/2.5 IN./4200RPM/ HITACHI EUCALYPTUS DK23EA40 KH.02007.002

KH.25202.001

KH.32005.002 KH.02004.001

KH.33005.002

KH.03006.002 KH.03007.002 KH.33004.001 KH.34005.002
Partname And Description HDD 40GB 2.5" 4200RPM HGST MORAGA IC25N040ATMR04-0 08K0633 HDD 40GB/2.5 IN./4200RPM/ TOSHIBA NEPTUNE MK4021GAS HDD 40GB 2.5" 5400RPM SEAGATE ST94011A HDD 40GB 2.5" 4200RPM FUJITSU V-40 MHT2040AT HDD 60GB/2.5 IN./4200RPM/ HITACHI EUCALYPTUS DK23EA60 HDD 60GB 2.5" 4200RPM HGST MORAGA IC25N060ATMR04-0 08K0634 HDD 60GB/2.5 IN./4200RPM/ TOSHIBA NEPTUNE MK6021GAS HDD 60GB 2.5" 4200RPM FUJITSU V-40 MHT2060AT HDD 80GB 2.5" 4200RPM HGST MORAGA IC25N080ATMR04-0 08K0635

Part Number KH.04007.004

KH.34004.001 KH.04001.004 KH.04006.002 KH.06005.001

KH.06007.002

KH.36004.001 KH.06006.002 KH.08007.002
Heatsink 4 CPU FANSINK 34.T30V1.001

VGA HEATSINK PLATE

34.T30V1.002

CPU HEATSINK PLATE

34.T30V1.003

Picture 2

Partname And Description KEYBOARD 84KEY DARFON NSK-AC61D US-INT KEYBOARD 84KEY DARFON NSK-AC602 TAIWAN KEYBOARD 85KEY DARFON NSK-AC60S SPANISH KEYBOARD 84KEY DARFON NSK-AC603 THAI KEYBOARD 85KEY DARFON NSK-AC60U UK KEYBOARD 85KEY DARFON NSK-AC60G GERMAN KEYBOARD 85KEY DARFON NSK-AC606 PORTUGUESE KEYBOARD 84KEY DARFON NSK-AC60C CZECH
Part Number KB.T3007.001 KB.T3007.002 KB.T3007.003 KB.T3007.004 KB.T3007.006 KB.T3007.007 KB.T3007.011 KB.T3007.015
LCD 7 LCD MODULE 14.1" TFT XGA CHIMEI N141X6-L01/08 LCD MODULE 15" TFT XGA CHIMEI N150X3-L05 LCD MODULE 15" TFT XGA HITACHI TX38D81VC1CAB LCD MODULE 15" TFT XGA AU B150XG01 V.2 LCD 14.1" TFT XGA AU B141XN04 V2/5AXXX LCD 14.1" TFT XGA CHIMEI N141X6-L01/08 LCD 15" TFT XGA CHIMEI N150X3-L05 LCD 15" TFT XGA HITACHI TX38D81VC1CAB LCD 15" TFT XGA AU B150XG01 V.2 INVERTER BOARD 14"/15" DARFON V0.21071.001 6M.T30V1.005 6M.T30V1.006 6M.T30V1.007 6M.T30V1.008 LK.14105.005 LK.1410D.001 LK.1500H.001 LK.15004.004 LK.15005.001 19.T30V1.001
LCD BRACKET RIGHT FOR 14.1" LCD BRACKET RIGHT FOR 15"
33.T30V1.006 33.T30V1.009
LCD BRACKET LEFT FOR 14.1" LCD BRACKET LEFT FOR 15"
33.T30V1.007 33.T30V1.008
Partname And Description INVERTER CABLE

Part Number 50.T30V1.007

LCD COAXIAL CABLE

50.T30V1.008

LCD PANEL W/HINGE & LOGO

60.T30V1.008

LCD BEZEL 14.1" W/ICON LABEL LCD BEZEL 15" W/ICON LABEL
60.T30V1.006 60.T30V1.007

HINGE PACK

6K.T30V1.001
Main Board MAINBOARD W/LAUNCH CABLE & MODEM & MODEM CABLE & PCMCIA SLOT & RTC BATTERY MB.T3001.001
Miscellaneous LOGO 31.42S08.001

ICON LABEL

40.T30V1.001

TOUCHPAD SCROLL KEY

42.T30V1.007
Partname And Description TOUCHPAD KNOB

Part Number 42.T30V1.008

LCD SCREW RUBBER UPPER LCD SCREW RUBBER LOWER RUBBER FOOT LCD BEZEL RUBBER UPPER NAME PLATE TM250 NAME PLATE TM240
47.T30V1.001 47.T30V1.002 47.T30V1.003 47.T30V1.004 40.T30V1.003 40.T30V1.002
Memory NS MEMORY SO-DIMM DDR266/ 128MB /INFINEON HYS64D16000GDL-7-B KN.12802.004
MEMORY SO-DIMM DDR266/ 128MB/0.14U /NANYA NT128D64SH4B0GM-75B MEMORY DDR266 128MB NANYA NT128D64SH4BBGM-75B MEMORY DDR266 128MB MICRON MT4VDDT1664HG265B2 MEMORY DDR266 128MB MICRON MT4VDDT1664HG265C2 MEMORY SO-DIMM DDR266/ 256MB/0.14U /INFINEON HYS64D32020 GDL-7-B MEMORY DDR266 256MB NANYA NT256D64SH8BAGM-75B MEMORY SO-DIMM DDR266/ 256MB/0.15U /MICRON MT8VDDT3264HDG-256B3 MEMORY SO-DIMM DDR266 256MB MICRON MT8VDDT3264HDG-265C3 MEMORY SO-DIMM DDR266/ 512MB/0.14U /INFINEON HYS64D64020GBDL-7-B MEMORY DDR333 128MB INFINEON HYS64D16000GDL-6-B MEMORY DDR333 256MB INFINEON HYS64D32020GDL-6-B MEMORY DDR333 256MB NANYA NT256D64SH8BAGM-6K

KN.12803.003

KN.12803.007 KN.12804.004

KN.12804.005

KN.25602.001
KN.25603.010 KN.25604.003

KN.25604.004

KN.51202.003
KN.12802.006 KN.25602.009 KN.25603.009
Partname And Description MEMORY DDR333 256MB ELPEDIA W30256AAEPI652A MEMORY DDR333 256MB MOCRON MT8VDDT3264HDG335C3 MEMORY DDR333 512MB INFINEON HYS64D64020GBDL-6B
Part Number KN.25609.002 KN.25604.009

KN.51202.007

Optical Drive CD-ROM MODULE 24X MITSUMI SR244W1 DVD-ROM MODULE 8X MKE SR8177 6M.T30V1.001 6M.T30V1.002
CD-ROM DRIVE 24X W/ BEZEL MITSUMI SR244W1 DVD-ROM DRIVE 8X W/ BEZEL MKE SR-8177
KD.24X04.002 KV.08X02.004

OPTICAL DRIVE BRACKET

33.T30V1.004
PCMCIA slot/PC card slot PCMCIA SLOT 22.T30V1.001
Pointing Device NS TOUCHPAD SYNAPTICS TM41P357 56.17001.001
Speaker SPEAKER SET 23.T30V1.002
Screws NS NS SCREW SCREW 86.T30V1.001 86.T30V1.002
No. NS NS NS NS NS NS NS NS NS
Partname And Description SCREW SCREW SCREW SCREW SCREW SCREW SCREW SCREW SCREW
Part Number 86.9A352.3R0 86.9A353.6R0 86.9A524.4R0 86.9A552.2R0 86.9A552.3R0 86.9A552.4R0 86.9A553.3R0 86.9A553.4R0 34.00015.081

Appendix A

Model Definition and Configuration

Model Name Definition

Model Number 242X 242XV 242XC 242LMi 244X 244XV 244XC 244LM 244LC 250X 250XC 250LC 251XCi 251LC 251LCi 251LM LCD 14.1 14.1 14.1 15.0 14.1 14.1 14.1 15.0 15.0 14.1 14.1 15.0 14.1 14.1 14.1 15.0 CPU ICP 2.4G ICP 2.4G ICP 2.4G ICP 2.4G ICP 2.6G ICP 2.6G ICP 2.6G ICP 2.6G ICP 2.6G P4P 2.4G P4P 2.4G P4P 2.4G P4P 2.66G P4P 2.66G P4P 2.66G P4P 2.66G Memory 1x256M 1x256M 1x256M 2x256M 1x256M 1x256M 1x256M 1x256M 1x256M 1x256M 1x256M 1x256M/ 2x256M 1x256M 2x256M 1x256M 2x256M HDD 20/ 30G 30G 30G 40G 20/ 30G 30G 20/ 30G 30G 30G 20/ 30G 30G 30/ 40G 30G 40G 40G 40G CD/DVD 24x CD 8x DVD 24x CDRW+DVD DVD-RW 24x CD 8x DVD 24x CDRW+DVD DVD-RW 24x CDRW+DVD 24X CD 24x CDRW+DVD 24x CDRW+DVD 24X CDRW+DVD/ 24X CDRW+DVD 24X CDRW+DVD DVD-RW Battery Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Wireless LAN N N N 11b N N N N N N N N 11b N 11b N

Item I/O - PS2 (Serial) Keyboard/Mouse IBM 101 key keyboard IBM 109 key keyboard Acer PS2 keyboard Acer KB-101A IBM Numeric Keypad III IBM Numeric Keypad Acer Mouse IBM PS2 Mini Mouse IBM PS2 Mouse
Logitech Cordless MouseMan Wheel PS2 interface Logitech Serial Mouse M-M35 Microsoft InteliMouse PS2 interface Microsoft InteliMouse Optical PS2 interface Logitech First Mouse Three Button Serial Mouse I/O - USB (Printer/Scanner) Epson Stylus Color 740 USB interface HP DeskJet 880C USB interface Canon CanonScan D1250 (USB 2.0, JP OS only) HP ScanJet 3300C Color Scanner I/O - USB (Speaker/Joystick)) JS USB Digital Speaker Panasonic USB Speaker EAB-MPC57USB AIWA Multimedia Digital Speaker Microsoft SideWinder Precision Pro Joystick Logitech WingMan RumblePad I/O - USB Camera Intel Easy PC Camera Logitech QuickCam Express Internet Logitech QuickCam Home PC Video Camera Orange Micro USB 2.0 Web Cam I/O - USB Storage Drive I/O-USB Flash Drive Logitech CDRW +DVDROM combo USB interface Iomega USB Zip 250MB IBM 32MB USB Memory key Apacer USB Handy Drive 32MB Apacer USB Handy Drive 256MB I/O - USB Hub Belkin 4 Port USB Hub Eizo I Station USB Hub Elecom USB Hub 4 Port Sanwa USB Hub 4 Port 4 Port Hub USB 2.0 I/O - Access Point (802.11b) Hitachi DC-CN3300 Lucent RG-1000 Lucent WavePoint-II Cisco Aironet 350 Orinoco AP-500 I/O Acess Point (802.11a/b) I/O Acess Point (802.11a) PCMCIA PCMCIA - ATA IBM Microdrive 340MB IBM Microdrive 1G Iomega Click! 40MB Sony Memory Stick 64MB Apacer SD Flash Card 128MB Transcedn SD Card 32MB Intel Dual Pro/Wireless 5000 Intel Pro/Wireless 5000

Item PCMCIA - USB 2.0

Specifications Apricorn EZ-USB2.0 Cardbus PC Card DTK USB 2.0 2Port CardBus Host Controller Adaptec USB2CONNECT

PCMCIA - 1394

Buffalo 1394 Interface Cardbus IFC-ILCB/DV I-O Data 1394 Interface Cardbus CB1394/DVC Pixela 1394 Cardbus PC Card PIX-PCMC/FW1
PCMCIA-SCSI PCMCIA - Bluetooth
Adaptec 1408 or B SCSI CB NewMedia Bus Toaster SCSI II IBM Community Bluetooth PC Card Toshiba Bluetooth PC Card
Microsoft Windows 2000 Environment Test
Microsoft Windows 98 Environment Test
Online Support Information
This section describes online technical support services available to help you repair your Acer Systems. If you are a distributor, dealer, ASP or TPM, please refer your technical queries to your local Acer branch office. Acer Branch Offices and Regional Business Units may access our website. However some information sources will require a user i.d. and password. These can be obtained directly from Acer CSD Taiwan. Acer's Website offers you convenient and valuable support resources whenever you need them. In the Technical Information section you can download information on all of Acer's Notebook, Desktop and Server models including: Service guides User's manuals Training materials Main manuals Bios updates Software utilities Spare parts lists Chips TABs (Technical Announcement Bulletin) For these purposes, we have included an Acrobat File to facilitate the problem-free downloading of our technical material. Also contained on this website are: Detailed information on Acer's International Travellers Warranty (ITW) Returned material authorization procedures An overview of all the support services we offer, accompanied by a list of telephone, fax and email contacts for all your technical queries. We are always looking for ways to optimize and improve our services, so if you have any suggestions or comments, please do not hesitate to communicate these to us.