Reviews & Opinions
Independent and trusted. Read before buy Acer Travelmate 3200!

Acer Travelmate 3200 Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Acer Travelmate 3200 Laptop & Notebook, size: 4.8 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


Acer Travelmate 3200Acer TravelMate 332T Laptop Battery 3200mAh Replacement
Lilon, 11.1V, 3200mAh. - Lilon, 11.1V, 3200mAh

Brand: ACER
Part Number: TRAVELMATE 332T
UPC: 839438011773

Here you can find all about Acer Travelmate 3200, for example specs and battery, manual, drivers. You can also write a review.
[ Report abuse or wrong photo | Share your Acer Travelmate 3200 photo ]

User reviews and opinions

Comments to date: 3. Page 1 of 1. Average Rating:
diederikv 4:23pm on Saturday, September 4th, 2010 
Great Screen, brilliant speed, Centrino, WLAN, 802.11g, Bluetooth, 1cm Thick at front!, Hot Keys, 512-1024mb RAM, Brilliant Looks.
iskandarbaharuddin 9:31pm on Saturday, June 5th, 2010 
overall a very good laptop for students, although BACK YA STUFF UP PEOPLE! i lost my whole hardrive :(. they are generally reliable, very light.
Nerolo 2:09am on Saturday, May 22nd, 2010 
The 3201XCi is amazing. Bluetooth, gigabit, wireless. Good battery life, 9700 ATI, pretty light for a 14.1" NB, WinXP Pro, cheap price.

Comments posted on are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.




Keyboard and Pointing Device
84/85-key Windows keyboard Ergonomically-centered touchpad pointing device with scroll function


One Type II CardBus PC Card slot Upgradeable memory modules Acer EasyPort

I/O Ports

One Type II PC Card slot One RJ-11 phone jack (V.90/92) One RJ-45 jack for LAN (Ethernet 10/100/1000 Base-T) One 100-pin port replicator One external monitor port One line-out jack (3.5mm minijack) One microphone jack (3.5mm minijack) One Infrared (FIR) port One IEEE 1394 port Two USB 2.0 ports One 3-in-1 memory card reader (MS/MMC/SD)

System Block Diagram

Voltage Rails PWR_SRC Primary DC system power supply 3VSUS +3V 3VPCU 5VSUS +5V
3.3V switched power rail ( off in S4-S5 ) 3.3V switched power rail ( off in S3-S5 ) 3V always on power rail 5V switched power rail ( off in S4-S5 ) 5V switched power rail ( off in S3-S5 )

5V always on power rail

VCC_CORE 1.34V/0.94V switched power rail for CPU core voltage ( off in S3-S5 ) VCC_VID 1.2V power rail regulator from 2.5VSUS for CPU VID ( off in S3-S5 )



( Micro-FCPGA 478 )

VHCORE Page :29 Page : 02, 03

CLOCKS (ICS950810)

2.5VSUS 2.5V switched power rail for DDR Memory ( off in S4-S5 ) +1.25 1.5V VGA_CORE +2.5V 1.25V switched power rail for DDR Termination ( off in S3-S5 ) 1.5V power rail regulator from 2.5VSUS for AGP I/F ( off in S3-S5 )

3V 2_5V

14M_SIO (SIO) Page :08 14M_ICH (SB,SB-SMBUS) 14M_ALC202
CLK48_USB(SB,SB-USB) 1.2V switched power rail for VGA Core voltage ( off in S3-S5 ) 2.5V switched power rail for VGA Frame Buffer ( off in S3-S5 )

Hardware Specifications and Configurations


Item CPU type Core logic CPU package CPU core voltage Intel 855GME+ICH4M Intel socketable 478pin Micro-BGA 1.308V (highest frequency mode) to 0.956V (low frequency mode) 0.748V (deeper sleep mode) Specification Intel Pentium M processor at 1.5~2.0GHz (Dothan)
Item BIOS vendor BIOS Version BIOS ROM type BIOS ROM size BIOS package Supported protocols Phneoix 3A01 Flash ROM 512KB 32-pin PLCC ACPI 2.0, PC Card 95, SM BIOS 2.0, IEEE1284-ECP/EPP, PCI 2.2, PnP 1.0a, DMI 2.0, PS/2 keyboard and mouse, USB 2.0, VGA BIOS, CD-ROM bootable, IEEE 1394 Set by setup manual Specification

BIOS password control

Second Level Cache
Item Cache controller Cache size 1st level cache control 2st level cache control Cache scheme control Built-in CPU 2MB for Intel Pentium M processor at 1.5~2.0GHz (Dothan) Always enabled Always enabled Fixed in write-back Specification

System Memory

Item Memory controller Memory size DIMM socket number Supports memory size per socket Supports maximum memory size Supports DIMM type Supports DIMM Speed Supports DIMM voltage Supports DIMM package Memory module combinations Intel 855GME built-in 0MB (no on-board memory) 2 sockets 1024MB 2G (by two 1024MB SO-DIMM module) DDR Synchronous DRAM 333 MHz 2.5V and 1.25V 200-pin soDIMM You can install memory modules in any combinations as long as they match the above specifications. Specification

Memory Combinations

Slot 1 0MB 0MB 0MB 0MB 128MB 128MB 128MB 128MB 256MB 256MB 256MB 256MB 512MB 512MB 512MB 512MB 1024MB 1024MB 1024MB 1024MB 1024MB 128MB 256MB 512MB 1024MB 128MB 256MB 512MB 1024MB 128MB 256MB 512MB 1024MB 128MB 256MB 512MB 1024MB 0MB 128MB 256MB 512MB 1024MB Slot 2 128MB 256MB 512MB 1024MB 256MB 384MB 640MB 1152MB 384MB 512MB 768MB 1280MB 640MB 768MB 1024MB 1536MB 1024MB 1125MB 1280MB 1536MB 2048MB Total Memory
NOTE: Above table lists some system memory configurations. You may combine DIMMs with various capacities to form other combinations. On above table, the configuration of slot 1 and slot 2 could be reversed. LAN Interface
Item Chipset Supports LAN protocol LAN connector type LAN connector location Features BroadCom BCM5705M 10/100/1000Mbps RJ45 Right panel Integrated 10/100/1000 BASE-T transceiver Wake on LAN support compliant with ACPI 2.0 PCI v2.2 Specification

IR Interface

Item Part name Package Performance Compliant VISHAY TFU6102F 8-pin SMT type 4Mbit/s IrDA 1.1 Specification

IDE1 Serial Number IDE2 Model Name

Serial Number UUID

The Main screen displays a summary of your computer hardware information, and also includes basic setup parameters. It allows the user to specify standard IBM PC AT system parameters.
PhoenixBIOS Setup Utility Info. Main Advanced Security Boot Exit
Item Specific Help System Time: System Date: System Memory: Extended Memory: Video Memory Quiet Boot: Power on Display: Network Boot: F12 Boot Menu: D2D Recovery: [13:20:53] [07/09/2004] 640 KB 510MB 64MB [Enabled] [Auto ] [Enabled] [Disabled] [Enabled] <Tab>, <Shift-Tab>, or <Enter> selects field. Shows system base memory size Shows extended memory size VGA memory size
NOTE: The screen above is for reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
Parameter System Time System Date
Description Sets the system time. Sets the system date.
Format/Option Format: HH:MM:SS (hour:minute:second) System Time Format MM/DD/YYYY (month/day/ year) System Date
System Memory Extended Memory
This field reports the memory size of the system. Memory size is fixed to 640KB This field reports the memory size of the extended memory in the system. Extended Memory size=Total memory size-2MB Shows the VGA memory size. The default value is set to 64MB Determines if Customer Logo will be displayed or not; shows Summary Screen is disabled or enabled. Enabled: Customer Logo is displayed, and Summary Screen is disabled. Disabled: Customer Logo is not displayed, and Summary Screen is enabled. Option: Enabled or Disabled

Video Memory Quiet Boot

Power on display
Auto: During power process, the system will detect if any display device is connected on external video port. If any external display device is connected, the power on display will be in CRT (or projector) only mode. Otherwise it will be in LCD only mode. Both: Simultaneously enable both the integrated LCD screen and the systems external video port (for an external CRT or projector).

Option: Auto or Both

LCD Auto Dim
Determines if the system will automatically dim the LCD brightness in order to save power when AC is not present. Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults.
Option: Enabled or Disabled

D2D Recovery

NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases.


The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced settings of the system.


Clear or Set Clear or Set

Set User Password

Primary Harddisk Security

Password on Boot

Disabled or Enabled
NOTE: When you are prompted to enter a password, you have three tries before the system halts. Dont forget your password. If you forget your password, you may have to return your notebook computer to your dealer to reset it.

Setting a Password

Follow these steps as you set the user or the supervisor password: 1. Use the w andy keys to highlight the Set Supervisor Password parameter and press the e key. The Set Supervisor Password box appears:
Type a password in the Enter New Password field. The password length can not exceeds 8 alphanumeric characters (A-Z, a-z, 0-9, not case sensitive). Retype the password in the Confirm New Password field.
IMPORTANT:Be very careful when typing your password because the characters do not appear on the screen. 3. 42 Press e. Chapter 2
After setting the password, the computer sets the User Password parameter to Set. If desired, you can opt to enable the Password on boot parameter. When you are done, press u to save the changes and exit the BIOS Setup Utility.

Removing a Password

Follow these steps: 1. Use the w and y keys to highlight the Set Supervisor Password parameter and press the e key. The Set Password box appears:

2. 3. 4.

Type the current password in the Enter Current Password field and press e. Press e twice without typing anything in the Enter New Password and Confirm New Password fields. The computer then sets the Supervisor Password parameter to Clear. When you have changed the settings, press u to save the changes and exit the BIOS Setup Utility.

Changing a Password

1. Use the w and y keys to highlight the Set Supervisor Password parameter and press the e key. The Set Password box appears:

2. 3. 4. 5. 6.

Type the current password in the Enter Current Password field and press e. Type a password in the Enter New Password field. Retype the password in the Confirm New Password field. Press e. After setting the password, the computer sets the User Password parameter to Set. If desired, you can enable the Password on boot parameter. When you are done, press u to save the changes and exit the BIOS Setup Utility.
If the verification is OK, the screen will display as following.
The password setting is complete after the user presses u. If the current password entered does not match the actual current password, the screen will show you the Setup Warning.
If the new password and confirm new password strings do not match, the screen will display the following message.
This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices includes the distette drive in module bay, the onboard hard disk drive and the CD-ROM in module bay.

Item Specific Help Floppy Devices CD-ROM/DVD Drive +Hard Drive Network Boot + and - indicate device categories. Use <Enter> to expand/collapses. Boot order is top-down using only the top device in each category. Use <F6> and <F5> to move highlighted item up and down.
The Exit screen contains parameters that help safeguard and protect your computer from unauthorized use.
Item Specific Help Exit Saving Changes Exit Dicarding Changes Load Setup Defaults Discard Changes Save Changes Exit System Setup and save your changes to CMOS.
The table below describes the parameters in this screen.
Parameter Exit Saving Changes Exit Discarding Changes Load Setup Default Discard Changes Save Changes
Description Exit System Setup and save your changes to CMOS. Exit utility without saving setup data to CMOS. Load default values for all SETUP item. Load previous values from CMOS for all SETUP items. Save Setup Data to CMOS.

BIOS Flash Utility

The BIOS flash memory update is required for the following conditions: New versions of system programs New features or options Restore a BIOS when it becomes corrupted. Use the Phlash utility to update the system BIOS flash ROM. NOTE: If you do not have a crisis recovery diskette at hand, then you should create a Crisis Recovery Diskette before you use the Phlash utility. NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Phlash. NOTE: Please use the AC adaptor power supply when you run the Phlash utility. If the battery pack does not contain enough power to finish BIOS flash, you may not boot the system because the BIOS is not completely loaded. Fellow the steps below to run the Phlash. 1. 2. 3. Prepare a bootable diskette. Copy the Phlash utilities to the bootable diskette. Then boot the system from the bootable diskette. The Phlash utility has auto-execution function.
This chapter contains step-by-step procedures on how to disassemble the notebook computer for maintenance and troubleshooting. To disassemble the computer, you need the following tools: Wrist grounding strap and conductive mat for preventing electrostatic discharge Small Philips screw driver Philips screwdriver Plastic flat head screw driver Tweezers NOTE: The screws for the different components vary in size. During the disassembly process, group the screws with the corresponding components to avoid mismatch when putting back the components. When you remove the stripe cover, please be careful not to scrape the cover.

General Information

Before You Begin
Before proceeding with the disassembly procedure, make sure that you do the following: 1. 2. Turn off the power to the system and all peripherals. Unplug the AC adapter and all power and signal cables from the system.
3. Remove the battery pack. NOTE: TravelMate 3200 series product uses mylar or tape to fasten the FFC/FPC/connectors/cable, you may need to tear the tape or mylar before you disconnect different FFC/FPC/connectors. NOTE: There are several types of screws used to secure bottom case and upper case assembly. The screws vary in length. Please refer the picture below, group the same type of screws together during service disassembling. Please also remember the screw location for each screw type. If you fasten the screw to the wrong location, the screw may be too long to damage the main board.
Disassembly Procedure Flowchart
The flowchart on the succeeding page gives you a graphic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the system board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.

K*2 Wireless cover

E*2 K*2 F*1 DDR/HDD cover
G*2 L*2 left and right hinge cover assembly

F*1 Keyboard

K*5 Wireless LAN card HDD module Memory K*1 Left hinger cover K*2 Right hinge cover Thermal module
Function board HDD assembly HDD bracket ODD module

Power board

A*2 F*3 A*2 A*1 LCD module

HDD assembly

HDD bracket

Optical disc drive

Optical bracket

K*2 K*3 A*2 G*1 E*10

Lower case assembly

Upper case assembly

D*7 K*1 Memory Modem board K*in 1 card reader E*4 Speaker set Touchpad bracket assembly I*2 MDC cable Touchpad board to main board cable Touchpad board Touchpad to touchpad board cable Touchpad
B*2 Lower case assembly Main board
LCD Module 4 screw pads M*4 LCD Bezel
M*7 LCD Inverter Antenna set LCD Cover LCD Assembly B*8

LCD coaxial cable

LCD Brackets

Screw List

Item A B C D E F G H I J K L M Description SCREW M2.5X4-INYLOK SCREW MM20030ICI3 SCREW MM20060ICI7 SCREW MM25025ICI0 SCREW MM25060IL69 SCREW MM25080IL68 SCREW MS25120IDJ4 SCREW M3.0*3.0-I NI SCREW MS25030IJ81 SCREW MM30035I354 SCREW MM25030IL65 SCREW MM25040I243 SCREW MM25050IL64 Acer part No. 86.T23V7.009 86.A08V7.005 86.A03V7.013 86.T25V7.010 86.A03V7.019 86.T48V7.001 86.T48V7.002 86.T48V7.003 86.A10V7.007 86.A03V7.011
Removing the Battery Pack
1. 2. 3. Release the battery lock. Slide the battery latch. Remove the battery pack.

Disconnect the cable as shown. 57
Disconnect the touchpad cable. Then detach the upper case assembly from the main unit.
Disassembling the Upper Case Assembly
1. 2. Disconnect touchpad touchpad to touchpad board cable. Remove the seven screws tightening the touchpad bracket.
Remove the touchpad bracket assembly. Then remove the touchpad assembly.

5. 6. 7.

Disconnect the touchpad to touchpad board cable. Disconnect the touchpad board to main cable. Remove the two screws tightening the touchpad board then remove it.
Disassembling the Lower Case Assembly
1. 2. 3. Disconnect the modem cable from the main board. Pop up the memory then remove it from the main board. Remove one screw that seucres the modem board.
Disconnect the modem cable from the modem board then remove the modem board. Tear off the type fastening the modem cable on the main board. Disconnect the modem cable from the main board then remove it.
Remove one screw that secures the three in one card reader. Detach the three in one card reader from the lower case assembly. Remove one screw holding the main board to the lower case.
10. Remove one screw tightening the main board as shown. 11. Detach the main board from the lower case carefully. 12. Use a plastic flat screwdriver to detach the VGA heatsink from the main board.
13. Remove the four screws tightening the speaker set. Chapter 3 59
14. Tear off the type fastening the speaker set. 15. Remove the speaker set from the lower case.
Disassembling the LCD Module
1. 2. Remove the four screw caps as shown. Then remove the four screws tightening the LCD bezel.
Detach the LCD bezel from the LCD module. Then turn the LCD bezel over and remove the microphone.
Tear off the type fastening the inverter cable then disconnect the inverter cable then remove the inverter. Remove the six screws holding the LCD to the LCD cover. Then remove the LCD from the LCD cover.
Remove the two screws holding the right bracket then remove the bracket. Remove the two screws holding the left bracket then remove the bracket.

Code E0h E1h E2h E3h E4h E5h E6h E7h E8h E9h EAh EBh ECh EDh EEh EFh F0h F1h F2h F3h F4h F5h F6h F7h 1
POST Routine Description Initialize the chipset Initialize the bridge Initialize the CPU Initialize the system timer Initialize system I/O Check force recovery boot Checksum BIOS ROM Go to BIOS Set Huge Segment Initialize Multi Processor Initialize OEM special code Initialize PIC and DMA Initialize Memory type Initialize Memory size Shadow Boot Block System memory test Initialize interrupt vectors Initialize Run Time Clock Initialize video Initialize System Management Mode Output one beep before boot Boot to Mini DOS Clear Huge Segment Boot to Full DOS
Index of Symptom-to-FRU Error Message

LCD-Related Symptoms

Symptom / Error LCD backlight doesn't work Action in Sequence First, plug a monitor to CRT port. Next, enter BIOS utility to running Load Default Settings then reboot the system. Reconnect the LCD connectors. Keyboard (if the brightness function key doesn't work). LCD cable LCD inverter LCD Main board LCD is too dark LCD brightness cannot be adjusted Enter BIOS Utility to execute Load Setup Default Settings, then reboot system. Reconnect the LCD connectors. Keyboard (if the brightness function key doesn't work). LCD cable LCD inverter LCD Main board Unreadable LCD screen Missing pels in characters Abnormal screen Wrong color displayed LCD has extra horizontal or vertical lines displayed. Reconnect the LCD cable LCD cable LCD Main board
Indicator-Related Symptoms
Symptom / Error Indicator incorrectly remains off or on, but system runs correctly HDD/CD-ROM active indicators cannot work Main board HDD/CD-ROM drive Device driver Main board Action in Sequence

Power-Related Symptoms

Symptom / Error Power shuts down during operation Action in Sequence Power source (battery pack and power adapter). See Power System Check on page 67. Battery pack AC adapter See if the thermal module is overheat (Heat sink or fan). Main board The system cannot power-on. Power source (battery pack and power adapter). See Power System Check on page 67. Battery pack Power adapter CPU Main board The system cannot power-off. In Windows XP operating system, hold and press the power switch for more than 4 seconds. If the system can power off, then the main board is OK. Verify OS in the HDD. Main board
Symptom / Error Battery cant be charged or discharged Battery pack Main board System hang during POST ODD/HDD/FDD/RAM module Main board Action in Sequence See Check the Battery Pack on page 68.

PCMCIA-Related Symptoms

Symptom / Error System cannot detect the PC Card (PCMCIA) PCMCIA slot pin is damaged. PC Card cannot be inserted or ejected PCMCIA slot assembly Main board PCMCIA slot assembly Check if the PCMCIA slot is blocked Main board Action in Sequence

Memory-Related Symptoms

Symptom / Error Memory count (size) appears different from actual size. Action in Sequence Enter BIOS Setup Utility to execute Load Default Settings then reboot system. RAM module Main board Check BIOS revision System can power on, but you hear two long beeps: B--, B-- and the LCD is blank. Reinsert DIMM DIMM Main board

Speaker-Related Symptoms

Symptom / Error In Windows, multimedia programs, no sound comes from the computer. OS volume control Audio driver Speaker Main board Internal speakers make noise or emit no sound. Microphone cannot work Speaker Main board Audio driver Volume control in Windows XP Main board Action in Sequence
Power Management-Related Symptoms
Symptom / Error The system will not enter hibernation mode Hard disk drive Main board The system doesnt enter standby mode after closing the lid of the portable computer. Driver of Power Option Properties Lid close switch in upper case Main board Action in Sequence Power option in Windows XP
Symptom / Error The system doesn't resume from hibernation/ standby mode. Action in Sequence Connect AC adapter then check if the system resumes from Standby/Hibernation mode. Check if the battery is low. Hard disk drive Main board The system doesn't resume from standby mode after opening the lid of the portable computer. Battery fuel gauge in Windows doesnt go higher than 90%. LCD cover switch Main board Refresh battery (continue use battery until power off, then charge battery). Battery pack Main board System hangs intermittently. Reconnect hard disk/CD-ROM drives. Main board
Peripheral-Related Symptoms
Symptom / Error System configuration does not match the installed devices. Action in Sequence Enter BIOS Setup Utility to execute Load Setup defaults, then reboot system. Reconnect hard disk/CD-ROM drives/FDD or other peripherals. Main board External display does not work correctly. Press Fn+F5, LCD/CRT/Both display switching Keyboard Main board USB does not work correctly Print problems. Main board Enter BIOS Setup Utility to execute Load Default Settings then reboot the system. Run printer self-test. Printer driver Printer cable Printer Main board Parallel port device problems Enter BIOS Setup Utility to execute Load Default Settings then reboot the system. Device driver Device cable Device Main board

Appendix A

Model Definition and Configuration

TravelMate 3200 Series

Model Number 3201XCii CPU PM 715 (1.5GHz/ 2M) PM 715 (1.5GHz/ 2M) PM 1.6G(Dotha n) PM 1.6G(Dotha n) LCD 14.1" XGA Memory DDR333 2x256MB DDR333 2x256MB DDR333 1x512MB DDR333 1x512MB HDD (GB) 80GB ODD 24x Combo (9.5mm) 4x DVDSmulti (9.5mm) 24x Combo (9.5mm) 4x DVDSmulti (9.5mm) Y BT Wireless LAN 802.11g


14.1" XGA





Appendix B

Test Compatible Components
This computers compatibility is tested and verified by Acers internal testing department. All of its system functions are tested under Windows XP Home environment. Refer to the following lists for components, adapter cards, and peripherals which have passed these tests. Regarding configuration, combination and test procedures, please refer to the TravelMate3200 series Compatibility Test Report released by the Acer Mobile System Testing Department.
Microsoft Windows XP Pro Environment Test
Item CRT Port CRT Monitor: ViewSonic PF775 Philips Brilliance 109P 19" LCD Monitor: LCD Quanta ADT 20" LCD akia KX1 Projector: Panasonic PT-LC80U Parallel Port Printer: HP Desk Jet 840C HP Laser Jet 5M HP Deskjet 450 Cable: LL5 cable 1394 Port HDD: IEEE 1394 (Fire Wire)/USB 1.1 Combo Hard Drive CCD: 1394 CCD (APLUX C102T) 1394 CardBus Card: IEEE 1394 CardBus Card \DV Magician\UPMOST Cable: 1394 four to four cable USB 2.0 HUB: Highspeed\4 Port UNION START UH-364 W-FORCE 4 Port USB2.0 Super Mini Hub HDD: USB HDD:VIPower(Smart Family Disk) DVD/CD-RW: Pioneer DVR-104 Ricoh MP5125A YAMAHA CD/RW-70 Printer: HP3425 Printer Handy Drive: SanDisk Cruzer USB 2.0 Handy Drive 256MB USB Port USB Mouse: BenQ M102-G80 Logitech Mouse M-BE58 Microsoft Wheel Mouse Optical USB & PS2 Compatible Acer MP0930 USB Keyboard: Microsoft Internet Keyboard Pro BenQ 6511-ME KILITEK USB KeyPad: LUNARIS TK-LU2BSV USB Keypad Specifications
Item USB Port USB CCD: ViewQuest NB330 USB HDD:


HD 530 Tested to comply with FCC Standards USB FDD: Teac USB FDD Yano USB FDD UFD-04 NEC USB FDD Mitsumi USB FDD D353FUE USB Speaker: J-S USB 3D Speaker /J1321 USB Printer: Canon BJC-3000 HD DeskJet 930C HP DeskJet 840C USB Hub: PCI_ USB HUB\UH-400 USB Hub /UH-9124Z USB LAN: BUFFALO USB-10/100M Ethernet LUX-TX USB Handy Drive: JMTEK USB 1.1 Handy Drive 128MB GB LAN HUB PS/2 Port 3COM SUPER STACK II \ 3C16611 24port Keyboard: Microsoft Internet Keyboard Pro BTC Keyboard PS/2 Keypad: PC Keypad KB-5640 Mouse: Logitech M-C48 COM Port S-Video PC Card Mouse: Logitech Serial Mouse M-MM43 TV: SONY Trinitron 14"\PVM-14M2U Modem Card: Psion - Gold Card Glabal 56K+Fax SyCard: 16bit 32bit 16 bit LAN Card: 3COM 10M LAN Card (3CCFE589ET) Xircom EtherNet 10/100+Modem56 CEM56-100 CardBus LAN Card: 3COM 10/100 CardBus LAN Card (3CCFE575CT) SCSI: Adaptec SlimSCSI APA-1460D Card Adaptec SlimSCSI 1480A CardBus UltraSCSI Card RATOC REX-CB80

Item PC Cards LAN+Modem card:
Specifications Xircom CreditCard Ethernet + Modem 56k (CEM56-100) ATA Card: 4 in1 WIN&MAC Card reader+Transcend 128MB Apapter CF Card Read + PNY CF CARD 128MB Wireless LAN Card: CISCO AIRONET 350 SERIES\AIR-PCM350 Linksys WPC11ver.4 Intel(R)PRO / Wireless 2011B LAN PC Card

Memory Card

MMC: SanDisk 64MB Compact Flash Card: PNY 128MB Memory Stick: SONY 256MB SD Memory Card: Apacer 128MB Toshiba 256MB Smart Media: Transcend 128 MB Fuji 128 MB

Audio Jacks

Speaker: J-S 3D Speaker /J-2202 Headphone: PHILIPS Stereo Headphone SBC HP090 Labtec Stereo Headphone Elite-840 Earphone: Philips Earphone Microphone: Condenser MIC. EM-420T Labtec deskmic 524 Microphone
Access Point Bluetooth HDD
Intel 802.11B Linksys 54G HP Deskjet 450 with Ericsson bluetooth card Toshiba 40G Toshiba 60G Toshiba 80G HITACHI 60G

Appendix C

Online Support Information
This section describes online technical support services available to help you repair your Acer Systems. If you are a distributor, dealer, ASP or TPM, please refer your technical queries to your local Acer branch office. Acer Branch Offices and Regional Business Units may access our website. However some information sources will require a user i.d. and password. These can be obtained directly from Acer CSD Taiwan. Acer's Website offers you convenient and valuable support resources whenever you need them. In the Technical Information section you can download information on all of Acer's Notebook, Desktop and Server models including: Service guides for all models User's manuals Training materials Bios updates Software utilities Spare parts lists TABs (Technical Announcement Bulletin) For these purposes, we have included an Acrobat File to facilitate the problem-free downloading of our technical material. Also contained on this website are: Detailed information on Acer's International Traveler's Warranty (ITW) Returned material authorization procedures An overview of all the support services we offer, accompanied by a list of telephone, fax and email contacts for all your technical queries. We are always looking for ways to optimize and improve our services, so if you have any suggestions or comments, please do not hesitate to communicate these to us.

Index A

AFLASH Utility 47 Audio 30 External CD-ROM Drive Check 66 External Diskette Drive Check 66

Features 1 Flash Utility 47 Floppy Disk removing the 61 FRU (Field Replaceable Unit) List 87
Battery Pack 53 BIOS 27 package 27 password control 27 ROM size 27 ROM type 27 vendor 27 Version 27 BIOS Setup Utility 35 BIOS Supports protocol 27 BIOS Utility 35 Basic System Settings 40 Navigating 36 Onboard Device Configuration 42 Startup Configuration 41 System Information 36 System Security 46 Board Layout 4 Bottom View 6, 85 Top View 4
Hard disk 29 HDD 29 Hot Keys 17
Indicators 15 Intermittent Problems 80
Keyboard 32 Keyboard or Auxiliary Input Device Check 66

L2 cache 27

Cache controller 27 size 27 caps lock on indicator 15 CardBus 32

Memory Check 66 Modem 28

num lock on indicator 15
DIMM external 54 removing 54 Disassembly Battery Pack 52 LCD Module 61 Procedure Flowchart 51 Disassemblyt the Main Unit 57 Display 3 DVD-ROM Interface 30
Online Support Information 101
Panel 8 Bottom 14 left 8 PC Card 15, 32 PCMCIA 32 Pentium III 27 Power System Check 67 Battery Pack 68 Processor 27
Error Symptom-to-Spare Part Index 69
Second Level Cache 27 System Block Diagram 3 Layout 4 System Diagnostic Diskette 47 System Memory 27 System Utilities 35 System Utility Diskette 47
Test Compatible Components 97 Touchpad Check 68 Troubleshooting 65
Undetermined Problems 81 USB 31 utility BIOS 35

Video 31

Windows 2000 Environment Test 98



Airmac Battery 2150-6GS VL-AH160U Citation 16 VGN-FS840W Gr-dvl320 Awyahdc Portege 2010 Gigax1008B KV-2168MTJ Rotak 43 DV7732NSC HF-33W NW-E016F Subscription-WEB Multimixusb8 Coolpix 300 200 IS Ivsc-5502 Motolivn D802 2F2607 7 2 XR-1750 RR-QR200 SS-XB80V Freespace 2 Computer Link DCR-IP7E 600 SI DEH-2120UB Aqxxf 129 Pioneer C-21 Travelpilot 300 Roland E-56 CD1401B 24 NAD 7125 KX-FLM651 ER3313B Cleaner XR-C5110R System-ABS KV-28FQ70B Travelmate 4000 FAX-1835C ES-3042 TI-68 PET988 Digitech GSP5 Studio 5 RX-DS35 DVX9700 Phks 1450 Adventure ES-4001 Joybee 150 BKR-01701-LEU Ericsson W995 Photosmart 100 MD-105TX Reverb Comfort MRS-1044 WS9024 Cuda 168 SF-2216 PL50C450 DVP-NS32 5234A HT-C5200 RM6401L Studio 100 NAT ATA-171P 13420 W 960HD HS 200 HX2750 AC950W FX-880P KSC-SW1 Siemens CL75 EOC-3220 SCD-1 Kx-ts108 NP-N148P Drivers HMX-U20BP HBH-PV712 ICA-107W Reverb ECR 6920 DV1030 IDF-0720 Compact 300 ICF2010 W3301 EC-VX200 Manual HQ5812 Dynamaxx Furman MP20 BV-7-BV-7ir-bv-7vis-bv-t7 0


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101