ENVIRONMENTAL DATA SHEET PRODUCT: 1800FP SYSTEM DIMENSION AND WEIGHT
Depth, cm 22.3 Width, cm 40.6 Height, cm 43.1 Weight, kg 7.8 depending on options installed
Dell Computer Corporation www.dell.com
DECLARATIONS AND CERTIFICATIONS
This system received the following approvals and may be labeled with one or more of these marks depending on point of purchase: Approvals Certificate # Yes / No / N/A N/A Yes USA: Energy Star S1 Yes TUV-GS (visual ergonomics - systems without LCDs: ISO 9241 -3/-8 -- portables: ISO 9241-4, ISO 13406, and DIN 2137) 50013012 95:0206:1938 Yes Nordic: TCO95 N/A No Germany: Blue Angel
PERFORMANCE DATA1 Electromagnetic Compatibility
Systems marked with the symbol CE indicate compliance to the EMC Directive and the Low Voltage Directive of the European Union.

System Configuration

18.1 Color TFT LCD monitor. Max resolution:1280*1024, Hf:30-80KHz, Vf:56-85Hz The Energy Consumption and Declared Noise Emissions data is based on a configuration including.

Energy Consumption

Service Level
Maximum Minimum ACPI S3 Off Power Supply
Energy Consumption (Wattage)

<3 <1 N/A

Heat Dissipation (BTU/hr)

187.7 10.2 10.2 3.4 N/A

Energy Save Requirements Description of Service Level
The system is running programs to maximize the power consumption. The system is in a waiting mode, such as at the MS-DOS prompt. The system is in a low-power sleep mode. The system is turned off but is still connected to its AC power source. AC adapter is connected to mains with portable detached (portables only). Meets EU Eco label (2001/686/EC and 2001/687/EC)

Yes / No / N/A

N/A N/A N/A N/A N/A
Energy consumption is tested at 230 Volts / 50 Hz. Heat dissipation is calculated based on the measured watts, assuming the service level is attained for one hour. Off data is not meant to show compliance to US Executive Order 13221. When applicable, Dell product information related to US Executive Order 13221 may be obtained at: http://oahu.lbl.gov/index.html.
Declared Noise Emissions in accordance with ISO 9296
Service Level Floppy Drive Accessing Hard Drive Accessing Idle Sound Power (LWAd, bels) (1 bel=10 decibels, re 10-12 Watts) N/A N/A N/A Sound Pressure Operator Position (LpAm, decibels) (re 2x10-5 Pa) N/A N/A N/A
This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and peripherals you ordered. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied. The information in this document may change without notice; please note the revision number on the last page.
Environmental Data Sheet Page 1
PRODUCT MATERIALS INFORMATION2 Restricted Substances
This Dell product (plastic case parts, printed wiring boards, power supplies, and microprocessors) does NOT contain any of the following substances (in concentrations exceeding natural background levels) Asbestos Cadmium and its compounds above 100 parts per million (ppm) Halogenated dioxins or furans (i.e. polychlorinated dibenzodioxines, polychlorinated dibenzofurans) Halogenated flame retardants (chlorinated, brominated) in plastic parts over 25g Mercury (except for fluorescent bulbs used in display units) PCBs (polychlorobiphenyls) or PCTs (polychloroterphenyls) PBBs (polybromobiphenyls) or PBDEs (polybrominated diphenylethers) PVC (polyvinyl chloride) other than in cables and interconnect parts CFCs (chlorofluorocarbons), HCFCs (hydrofluorocarbons) and other ozone depleting substances Lead is not used in paints None of the substances included in the Montreal Protocol annex A, B, or C is used in Dells manufacturing plants.

Additional Materials Information
The cables may use PVC as an insulating material to ensure product safety The case material is PC+ABS This product does contain one or more mercury bulbs LCD Back Panel Keycaps, Flame Retardants Used in Mechanical Plastic Parts > 25 grams, Keycaps, and Motherboards Part Flame Retardant ISO 1043-4 Motherboard N/A Keycaps (portables only) N/A Mechanical Plastic Parts > 25 grams PC+ABS Bisphenol-A(discresyl phosphate) RDP (Resourlcinol)
ISO 11469 N/A N/A >PC+ABS<

Packaging

No CFCs (chlorofluorocarbons), HCFCs (hydrofluorocarbons) or other ozone depleting substances are used in packaging material. Chromium, lead, mercury, or cadmium are not intentionally added to packaging materials and are not present in a cumulative concentration greater than 100 ppm as incidental impurities. Criteria Yes / No Yes No halogenated plastics or polymers are used for packaging material Yes Dell complies with the EU Directive 94/ 62/ EEC Yes Depending on your point of purchase, packaging materials are labeled in accordance with DIN 6120 Marking of packing materials and packages for their recycling Packaging Materials Weight, kg LDPE 0.04 Box(Carton)-DW3 1.32 EPP (Expanded Poly Propylene) 0.34 Printed user documentation is bleached in a chlorine-free process. (Europe Only)
Waste Handling. Local regulations should be observed when disposing of this product due to the presence of the materials and substances as listed above.
Environmental Data Sheet Page 2

Batteries

Batteries in this product are not based on mercury, lead or cadmium technologies. The batteries used in this product are in compliance with: EU Directive 91/ 157/ EEC EU Directive 93/ 86/ EEC EU Directive 98/ 101/ EEC The product documentation includes instructional information on the proper removal and disposal of the batteries used in this product. Below is a listing of batteries present in the product: Battery Description Internal Batteries Battery Type N/A N/A

DESIGN FOR ENVIRONMENT

Visit www.dell.com/environment for more information.

Longevity and Upgrading

Dell systems are, when applicable, designed for easy assembly, disassembly, and servicing. To extend the life of your system, you can install or upgrade certain system components (e.g., microprocessor, memory, expansion cards, and storage devices). Spare parts are available after the end of production for up to five years, or otherwise through the warranty period.

Recyclability

For recyclability, this system incorporates the following design guidelines: Minimal use of non-separable connections, such as gluing and welding between different materials. Minimal use of composite structure materials. Painting/varnishing plastic material has been avoided. Mechanical plastic parts greater than 100 grams consist of one material or of easily separable materials. Yes Yes Yes Yes
RECYCLING/ END-OF-LIFE SERVICE INFORMATION
Take back and recycling services are offered for this product in certain countries. If you want to dispose of system components, contact Dell for instructions.
DELL CORPORATE ENVIRONMENTAL INFORMATION
The following information is available at www.dell.com/environment: Corporate Environmental Policy Environmental Reports ISO 14001 certified environmental management systems
Document Version 1.0 posted 2/26/03

4.0 (12/3/2002)

Environmental Data Sheet Page 3

Norris Parts Repair Manual
Dell 1800FP Power Supply Installation Instructions
Copyright2006 All Rights Reserved - Distribution or Duplication of this document is prohibited.
The Dell UltraSharp 1800FP was designed for a wide variety of users ranging from the home to corporate or financial trading environments. It utilizes an 18.1" Active Matrix TFT LCD that displays brilliant images of text and graphics with a maximum resolution up to 1280 x 1024 pixels. Common Problems associated with this model:
1. NO POWER. 2. No Indicator lights are green on front panel.
Resolving these issues (Part Replacement): 1. Replace the power supply P/N 6870T445D10. This Power Supply works on the following models: BRAND DELL Disassembly Instructions: MODEL 1800FP REMARK 18.1" LCD MONITOR
1. Place monitor face down on flat surface using a soft towel to avoid scratching the LCD screen. 2. Use a cup or other small container to hold the screws as they are removed. 3. It is recommended, not required, that you purchase a static wrist guard or other anti-static guard. These can be purchased at a nominal cost at a computer hardware store or electronics repair shop. 4. Make sure the unit is unplugged and the power supply/plug is removed from the unit. 5. Important: Do not apply force onto the LCD screen at anytime, this will cause permanent damage. 6. This manual is provided as a reference guide. If you do not understand disassembly process or you do not feel that you are competent to perform the repair, then you should have the repair completed by a professional repair technician.
Disclaimer: Norris Parts provides this manual for reference only. Norris Parts is not responsible for any actions taken by the user of this manual. Norris Parts is not responsible for damage resulting from the repair or use of any equipment referenced in this manual.

Disassembly

Step 1: Remove the two (2) screws from the top of the base.

Step 2: Remove the base.

Step 3: Remove the six (6) screws from the back cover.
Step 4: Stick a flat screw driver between the back cover and the front bezel.
Step 5: Remove the back cover.
Step 6: Remove the back cover.
Step 7: Remove the six (6) screws from the metal cover.
Step 8: Remove the metal cover.
Step 9: Unplug connector from the power supply.
Step 10: Remove the two (2) screws from the power supply.
Step 11: Remove the screw from the power supply.
Step 12: Remove the screw from the power supply.
Step 13: Remove the screw from the front of the power supply.
Step 14: Remove the front of the power supply.
Step 15: Remove the power supply.
Step 16 Reassembly Inspect new part ensuring that any packing materials or tape are removed. Follow the directions in reverse to complete the installation of the replacement part. Make sure that all connectors are plugged in. Make sure that you replace all screws into their assemblies.