LifeBook E8010

Full-featured performance LifeBook with DVD Super Multi Drive Designed for Microsoft Windows operating systems Extensive interfaces for peripherals connection - Four USB 2.0 (rear x 3, left x 1), IEEE1394, SPDIF, Serial, Parallel and S-Video out Superior security features for enhanced data and hardware protection Bluetooth v1.2 for faster and enhanced connection performance

Platform

OS Supported Display Graphics Modular Bay Drive Bluetooth Memory Hard Disk Battery Weight Chipset Secondary Cache Max. Memory Supported Hard Disk Drive Audio Communication User Interface Card Slot Connector Interface Quick Launch Panel Security7 Dimensions AC Adapter Bundled Software Software on CD Port Replicator Modular Bay Options
SINGAPORE: Fujitsu PC Asia Pacific Pte Ltd Tel : (65) Fax : (65) MALAYSIA: Fujitsu PC Asia Pacific Pte Ltd Tel : (60-3) Fax : (60-3) HONG KONG: Fujitsu PC Asia Pacific Ltd Tel : (852) Fax : (852) THAILAND: Fujitsu Systems Business (Thailand) Ltd PC Division Tel : (66-2) Fax : (66-2) AUSTRALIA: Fujitsu PC Australia Toll Free: 283 Tel : (61-2) Fax : (61-2) www.lifebook.com.au CHINA: Fujitsu PC China Division Tel : (86-21) Fax : (86-21) www.pc-cn.fujitsu.com PHILIPPINES: Fujitsu Philippines Inc. Tel : (63-2) Fax : (63-2) TAIWAN: Fujitsu Taiwan Ltd Tel : (886-2) Fax : (886-2) VIETNAM: Fujitsu Vietnam Ltd Tel : (84-4) 831 3895~7 Fax : (84-4) INDONESIA: PT Fujitsu Systems Indonesia Tel : (62-21) Fax : (62-21) www.fujitsu.com/id Note: For countries not listed above, please contact our Singapore office.

Floppy Disk Drive Mouse

E8010 Recommended Configurations Intel Centrino Mobile Technology Intel Centrino Mobile Technology - Intel Pentium M Processor 7451 - Intel Pentium M Processor 7251 - Intel PRO/Wireless 2200BG10 network connection - Intel PRO/Wireless 2200BG10 network connection Microsoft Windows XP Home Edition Windows XP Professional Edition Microsoft 15" Super XGA+ TFT, 1400 x 1050 pixels 15" XGA TFT, 1024 x 768 pixels ATI MOBILITY RADEON 9700 with dedicated 64MB video memory DVD Super Multi Drive8 DVD/CD-RW Combo Drive Integrated v1.2 1GB DDR333 256MB DDR333 80GB 60GB 2 (8-cell 4800mAh) Up to 4.7hrs Up to 5.3hrs2 (8-cell 4800mAh) Approx. 3kg (w/weight saver option) Approx. 3kg (w/weight saver option) Specifications 855GME Intel 2MB 2048MB DDR333 Ultra DMA/100 and S.M.A.R.T support RealTek ALC203 AC97 codec with built-in dual Stereo Speakers 56K V.923 modem, IrDA 1.1 4Mbps5, 1000/100/10Mbps4 Gigabit Ethernet and Intel PRO/Wireless 2200BG10 network connection with Dual Antenna. Separate ON/OFF switch for wireless network connection Keyboard with Quick Point9: 84-key, 19mm key pitch, 3mm key stroke Touch Pad with Scroll Buttons PC Card Type I/II x 2 or Type III x 1, Smart Card support6 SD/MMC USB 2.0 x 4, VGA (external display), RJ45 (LAN), RJ11 (modem), PS/2(keyboard/mouse), SPDIF, S-Video out, IEEE1394, Serial, Parallel, Headphone-out, Microphone-in, Power Adapter DC-in, Port Replicator Interface Four Programmable Application Launch Buttons (Internet, Email and two other software) BIOS Lock, Hard Disk Lock, LifeBook Lock, Anti-theft Lock Slot, Smart Card6 333mm (W) x 285mm (D) x 32.2mm min (H) Bundled Accessories Input AC 100 ~ 240V, Output DC 19V 80W CyberLink PowerDVD, CyberLink Powerproducer, Sonic RecordNow DX, Sonic DLA, Adobe Acrobat Reader 6.0, Fujitsu UpdateNavi, Fujitsu Hardware Diagnostic Norman Virus Control & Norman Personal Firewall Optional Connector Interface: USB 2.0 x 4, Headphone-out, Microphone-in, DVI-D, VGA (external display), RJ45 (LAN), PS/2 (keyboard/mouse), Serial, Parallel, Power Adapter DC-in Replaceable with - Bay Battery, 6-cell 3800mAh, up to 9.1hrs2 battery life (Standard + Bay Batteries) - DVD Super Multi Drive8 - DVDRW Drive - DVD/CD-RW Combo Drive - DVD-ROM Drive - Weight Saver External USB 1.44MB FDD RF Wireless Optical Mouse11

JOB NO.: 5760 Printed by Fujitsu PC Asia Pacific Pte Ltd in December 2004. Information is correct at time of printing.
The above information shows the general technical specifications of the product and does not represent actual configuration. For specific configurations and their availability, please check with your local distributors. Processor definitions: Intel Pentium M Processor 745 (1.80GHz, 2MB L2 cache, 400MHz FSB), Intel Pentium M Processor 725 (1.60GHz, 2MB L2 cache, 400MHz FSB) Results obtained from Ziff Davis (BusinessWinstone 2001) Battery Mark V1.0.1 performed on systems with maximum battery life settings. Actual battery life will vary based on screen brightness, sound volume settings, running applications, connected peripherals, power management settings, battery conditioning, and other customer preferences. Modular Bay devices or hard drive usage may also have a significant impact on battery life. 3 Maximum 56Kbps performance varies according to your local service providers' services as well as line condition. V.92 performance is dependent on local service providers' services. 4 This term does not represent actual data rate of 1000/100/10Mbps and simply indicates compliance with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab standards. Actual maximum data rate depends on network configurations, cable conditions as well as connected devices. 5 This term does not represent actual data rate of 4Mbps and simply indicates compliance with IrDA standard specification 1.1. Actual maximum data rate depends on local configurations and connected devices. 6 Smart Card support requires a Smart Card adapter for the PC Card Slot. This is available as an accessory. Fujitsu does not provide the application for Smart Card Solution. 7 BIOS Lock needs a supervisor/user password to access BIOS setup. BIOS settings can be configured to prompt for password at every first bootup or all bootup sequences. Access to BIOS setup is needed to configure Hard Disk Lock. Hard Disk Lock requires an access key to retrieve data on the hard disk. This is a Data Confidentiality security feature. LifeBook Lock requires a supervisor/user password to bootup the LifeBook when it powers up or resumes last session from suspend/hibernate mode. This is an anti-theft feature with more than 800,000 password combinations using the buttons on the Quick Launch Panel. Antitheft Lock Slot allows the use of a lock to physically secure the LifeBook. SmartCard usage is dependent on customer's solution. Full security unlock sequence - LifeBook Lock, Bootup Lock (BIOS Lock), Hard Disk Lock. NOTE: Loss of password requires the LifeBook to be returned to Japan factory for system refresh. Cost of shipment and lost data will be borne by the customer. 8 Supports DVD-RAM, DVD+RW, DVD+R, DVD-RW, DVD-R, CD-RW, CD-R, CD-ROM and DVD-ROM formats 9 Quick Point is only available for Intel Pentium M Processor 745 configurations. Please check with your local distributors for actual configurations. 10 Some country configurations may be bundled with 802.11b WLAN e.g. Malaysia. Please check the country configuration with your local distributors. 11 Available in Hong Kong, Malaysia and Singapore only. It is natural for all thin-film transistor (TFT) liquid crystal displays (LCD) to show a small number of missing or discoloured dots. These are commonly known as non-conforming pixels. This is a technology limitation of TFT LCD and does not represent a defect. Fujitsu warranty does not cover limitations in technology such as non-conforming pixels. "Specifications reflected above are engineering and hardware specifications. They do not represent actual usage or operating dimensions, sizes, performances and weights as these are dependent on factors such as operating temperature, type of operating sysystem and application used, connected devices and accessories as well as hardware configurations of the notebook. Please check the compatibility of 3rd party accessories before purchase. Ambient temperature: 5 to 35C / 41 to 95F (operating), -10 to 60C / 14 to 140F (non-operating). Relative humidity: 20% to 80% RH (operating and non-operating)."

BLUETOOTH is a trademark owned by its proprietor and used by Fujitsu under license.

www.pc-ap.fujitsu.com

All rights to the mentioned trademarks reside with their respective owners. Fujitsu endeavours to ensure that the information in this documentation is correct and fairly stated, but does not accept liability for any errors or omissions. The development of Fujitsu products and services is continuous and published information may not be up to date. It is important to check the current position with Fujitsu. The document is not part of the contract or licence save in so far as may be expressly agreed.

Dealer:

BIOS SECTION E8010

LifeBook E Series BIOS

E Series BIOS

BIOS SETUP UTILITY

The BIOS Setup Utility is a program that sets up the operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS environment to operate your notebook. The BIOS Setup Utility configures:
Selecting a field causes a help message about that field to be displayed on the right-hand side of the screen. Pressing the Enter key with the highlight on a selection that is not a submenu or auto selection will cause a list of all options for that item to be displayed. Pressing the Enter key again will select the highlighted choice.
Device control feature parameters, such as changing I/O addresses and boot devices. System Data Security feature parameters, such as passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility, do the following: 1. Turn on or restart your notebook. 2. Press [F2] once the Fujitsu logo appears on the screen. This will open the main menu of the BIOS Setup Utility with the current settings displayed. 3. Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup menus to review or alter the current settings.
7. Pressing the [F9] key resets all items in the BIOS to the default values. 8. Pressing the [F10] key saves the current configuration and exits the BIOS Setup Utility. You will be asked to verify this selection before it is executed. 9. Pressing the [F1] key gives you a general help screen.
Entering the Setup Utility After a Configuration Change or System Failure
If there has been a change in the system configuration that does not agree with the parameter settings stored in your BIOS memory, or there is a failure in the system, the system beeps and/or displays an error message after the Power On Self Test (POST). If the failure is not too severe, it will give you an opportunity to modify the setup utility settings, as described in the following steps: 1. When you turn on or restart the computer there is a beep and/or the following message appears on the screen: Error message - please run SETUP program Press <F1> key to continue, <F2> to run SETUP 2. If an error message is displayed on the screen, and you want to continue with the boot process and start the operating system anyway, press the [F1] key.
Navigating through the Setup Utility
The BIOS setup utility consists of six menus: Main, Advanced, Security, Boot, Info, and Exit. This document explains each menu in turn, including all submenus and setup items. The following procedures allow you to navigate the setup utility menus:
], [ ]. 1. To select a menu, use the cursor keys: [ 2. To select a field within a menu or a submenu, use the
cursor keys: [ ], [ ]. 3. To select the different values for each field, press the [Spacebar] or [+] to change to the next higher selection and [F5] or [-] to go to the next lower selection. 4. To activate a submenu press the [Enter] key. 5. To return to a menu from a submenu, press the [Esc] key. 6. To go to the Exit menu from any other menu, press the [Esc] key.
If your notebook emits a series of beeps that sounds like a code and the display is blank, please refer to the Troubleshooting Section in the system Users Guide. The Troubleshooting Section includes a list of error messages and their meanings. If your data security settings require it, you may be asked for a password before the operating system will be opened.

Main Menu

3. If an error message is displayed on the screen, and you want to enter the setup utility, press the [F2] key. 4. When the setup utility starts with a fault present, the system displays the following message: Warning! Error message [Continue] 5. Press any key to enter the setup utility. The system will then display the Main Menu with current parameters values.
MAIN MENU SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set or view the current system parameters. (See Navigating through the Setup Utility on page 2 for more information.) The following tables show the names of the menu fields for the Main menu and its submenus, all of the options for each field, the default settings and a description of the fields function and any special information needed to help understand the fields use.
System Time and System Date can also be set from your operating system without using the setup utility. Use the calendar and time icon on your Windows Control panel or type time or date from the MS-DOS prompt.

Advanced

PhoenixBIOS Setup Utility Security Boot Info

Exit Item Specific Help

System Time: System Date:
[14:57:01] [06/02/2004] Adjust calendar clock. <Tab>, <Shift-Tab>, or <Enter> selects field.

F1 Help ESC Exit

Table 1: Fields, Options and Defaults for the Main Menu Note that the parameters listed in the following table may vary depending upon your systems configuration.

Menu Field

System Time:
Primary Master Secondary Master Language:
[HITACHI_DK23FA-40-(PM)] [UJDA750FDVD/CDRW-SM)] [English (US)]

Select Item Select Menu

-/Space Change Values Enter Select Sub-Menu

Figure 1. Main Menu

F9 F10
Setup Defaults Save and Exit

Options

Default

Description

Sets and displays the current time. Time is in a 24 hour format of hours:minutes:seconds with 2 digits for each. (HH:MM:SS). Example: 16:45:57. You may change each segment of the time separately. Move between the segments with the [Tab] key and/or [Shift] + [Tab] keys. Sets and displays the current date. Date is in a month/day/year numeric format with 2 digits each for month and day and 4 digits for year. (MM/DD/YYYY) for example: 03/20/1998. You may change each segment of the date separately. Move between the segments with the [Tab] key and/or [Shift] + [Tab] keys.

System Date:

Primary Master:
The product number of the hard drive. The product number of the CD-ROM drive. [English (US)]
Display the type of device on this ATA/ATAPI interface, if there is one. Pressing the Enter key selects the Primary Master submenu allowing additional device configuration options for this interface. Display the type of device on this ATA/ATAPI interface, if there is one. Pressing the Enter key selects the Secondary Master submenu allowing additional device configuration options for this interface The default setting differs between the US/European and the Japanese model. Selects the display language for the BIOS.
Selects Primary Master submenu

Secondary Master

Selects Secondary Master submenu

Language:

English (US) Japanese (JP)
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA devices are installed.
PhoenixBIOS Setup Utility Main Primary Master [HITACHI_DK23FA-40-(PM)] Item Specific Help
Type: Total Sectors: Maximum Capacity:
[Auto]] LBA Format 78140160 40008MB [16 Sectors] [Enabled] [Multiword DMA 2] [Disabled]
Select ATA/ATAPI drive installed here. [Auto] The BIOS auto-types the drive on boot time. Except [Auto] You enter parameters of the drive. [None] The drive is disabled.

Multi-Sector Transfers: LBA Mode Control: Transfer Mode: Ultra DMA Mode:
F9 Setup Defaults F10 Save and Exit
Figure 2. Primary Master Submenu
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

[Auto]

Selects the ATA/ATAPI device type. Select Auto to have the type automatically identified by the BIOS at POST. If None is selected, all of the following Setup items do not appear. Select CD-ROM if a CDROM drive is installed at this connection. If Hard Disk is selected, you must specify the number of Cylinders, Heads, and Sectors for the drive. Logical Block Addressing (LBA)
Auto None CD-ROM Hard Disk
LBA Format Total Sectors: Maximum Capacity: CHS Format Cylinders:
The total number of sectors on your hard disk The maximum capacity of your hard disk
Cylinders/Heads/Sectors A number between 0 and 65,535 This item is active only when Hard Disk is selected as the type. This field is changed by incrementing (pressing the [Spacebar]) or by typing in the number.

Heads:

This item is active only when Hard Disk is selected as type. You can change the value by incrementing (pressing the [Spacebar]) or by typing in the number. This item is active only when Hard Disk is selected as type. You can change the value by incrementing (pressing the [Spacebar]) or by typing in the number. Displays the maximum capacity of the drive calculated from the parameters of the hard disk when Auto is selected and the type is identified as hard disk. This option cannot be changed when Auto is selected. Specify the number of sectors per block for multiple sector transfer.
A number between 1 and 16

Sectors:

A number between 0 and 63

Maximum Capacity:

Display only

Multi-Sector Transfers:

Disabled 2 Sectors 4 Sectors 8 Sectors 16 Sectors Disabled Enabled Standard Fast PIO 1 Fast PIO 2 Fast PIO 3 Fast PIO 4 Multiword DMA 1 Multiword DMA 2 Disabled Mode 0 Mode 1 Mode 2 Mode 3 Mode 4 Mode 5

[16 Sectors]

LBA Mode Control:

[Enabled]

Enables or disables logical Block Addressing in place of Cylinder, Head, Sector addressing. This option cannot be changed when Auto is selected. Selects the method for moving data to/from the drive. Autotype the drive to select the optimum transfer mode. This option cannot be changed when Auto is selected.

Transfer Mode:

[Multiword DMA 2]

Ultra DMA Mode:

[Disabled]
Selects the method for moving data to/from the drive. Autotype the drive to select the optimum transfer mode. This option cannot be changed when Auto is selected.
Secondary Master Submenu of the Main Menu
The Secondary Master submenu allows you to configure secondary ATA devices.

PhoenixBIOS Setup Utility Main Secondary Master [UJDA750FDVD/CDRW-(SM)] Item Specific Help
Type: Multi-Sector Transfers: LBA Mode Control: Transfer Mode: Ultra DMA Mode:
[Auto] [Disabled] [Disabled] [Standard] [Disabled]
Figure 3. Secondary Master Submenu
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
NOTE: The Type field does not appear as a drop-down menu. Tap the spacebar to cycle through the selections. Selects the ATA/ATAPI device type. Select Auto to have the type automatically identified by the BIOS at POST. If None is selected, all of the following setup items do not appear. Select CD-ROM or Hard Disk for appropriate drive type installed at this connection. Cylinders/Heads/Sectors

CHS Format Cylinders:

A number between 0 and 65,535
This item appears only when Hard Disk is selected as the type. This field is changed by incrementing (pressing the [Spacebar]) or by typing in the number. This item appears only when Hard Disk is selected as type. You can change the value by incrementing (pressing the [Spacebar]) or by typing in the number. This item appears only when Hard Disk is selected as type. You can change the value by incrementing (pressing the [Spacebar]) or by typing in the number.
Displays the maximum capacity of the drive calculated from the parameters of the hard disk when Auto is selected and the type is identified as hard disk, or User is selected. This option cannot be changed when Auto is selected. Specify the number of sectors per block for multiple sector transfer.
Enables or disables Logical Block Addressing in place of Cylinder, Head, Sector addressing. This option cannot be changed when Auto is selected. Selects the method for moving data to/from the drive. Autotype the drive to select the optimum transfer mode. This option cannot be changed when Auto is selected. Multi-word DMA is automatically set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to mode 2 for Fast PIO 4 / DMA.

[Standard]

LBA Format Total Sectors: Maximum Capacity:
Logical Block Addressing (LBA)
Exiting from Main Menu When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu. If you wish to move to another menu, use the cursor keys.
ADVANCED MENU SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:
Set the I/O addresses for the serial and parallel ports. Set the keyboard and mouse features. Select between the display panel and an external CRT display. Enable or disable compensation for your display. Enable or disable the IDE, Mouse, LAN, and Wireless LAN controllers.
Configure CPU and USB features in your system. (See Navigating through the Setup Utility on page 2 for more information.)

The following tables show the names of the menu fields for the Advanced Menu and its submenus, all of the options for each field, the default settings and a description of the fields function and any special information needed to help understand the fields use.
Serial/Parallel Port Configurations Keyboard/Mouse Features Video Features Internal Device Configurations CPU Features USB Features Miscellaneous Configurations Event Logging
Table 4: Fields, Options and Defaults for the Advanced Menu
Serial/Parallel Port Configurations
Configures serial ports and parallel ports.

Figure 4. Advanced Menu

When selected, opens the Serial/Parallel Port Configurations submenu which allows the user to modify settings for serial, infrared and parallel ports. When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and internal keyboard and mouse parameters. When selected, opens the Video Features submenu, which allows setting of the display parameters, including routing of video signals to different displays.

Keyboard/Mouse Features

Video Features

Advanced Menu

Internal Device Configurations
When selected, opens the Internal Device Configuration submenu, which allows enabling or disabling the IDE, Modem, LAN, and WLAN Controllers. When selected, opens the CPU Features submenu to allow you to change the CPU speed for battery life optimization. When selected, opens the USB Features submenu to allow you to enable or disable legacy USB devices and SCSI SubClass support. When selected, opens the Miscellaneous Configurations submenu to allow you to enable or disable the power button, Wake Up On LAN, and control volume settings. When selected, opens the event logging submenu.

CPU Features

USB Features
Miscellaneous Configurations

Event Logging

Serial/Parallel Port Configuration Submenu of the Advanced Menu
The Serial/Parallel Port Configuration submenu lets you set the I/O addresses and interrupt levels for the serial, infrared and parallel ports of your notebook.
I/O addresses, DMA channels and Interrupt levels can be entered in various ways, including via the BIOS setup utility, the control software for the I/O device, or the hardware. If any two ports or devices, serial or parallel, have the same address assigned, your notebook will not function normally. Keep a record of original settings before making any changes if restoration is required. See your hardware and software documentation as well as the setup utility to determine settings and limitations.
To prevent IRQ and address conflicts, avoid changing the default settings.
If your notebook emits a series of beeps that sounds like a code and the display is blank, refer to the Troubleshooting Section in the system Users Guide. The Troubleshooting Section includes a list of error messages and their meanings. All I/O addresses in Table 5 are in hexadecimal.

Display:

Selects where the video signal will be routed.
Internal Flat Panel External (Analog) External (Digital) Autos Disabled Enabled

Compensation:

Enables or disables compensation which controls spacing on the display. When enabled, displays with less than pixel resolutions of 1024 x 768 or 800 x 600 will still cover the entire screen. A resolution below 800 x 600 will fill the screen, but due to the low resolution, will appear blocky and may not be acceptable.
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configuration submenu allows the user to enable or disable IDE, Modem, LAN and Wireless LAN Controllers.
PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help [Disabled] No IDE ports are enabled. [Primary] Only primary IDE port is enabled. [Secondary] Only secondary IDE port is enabled. [Both] Both primary and secondary IDE ports are enabled.
IDE Controller: Modem Controller: LAN Controller: Wireless LAN:
[Both] [Enabled] [Enabled] [Enabled]
Figure 8. Internal Device Configuration Submenu
Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu

IDE Controller:

[Both]
Enables or disables selected IDE devices.
Disabled Primary Secondary Both Disabled Enabled Disabled Enabled Disabled Enabled

Modem Controller:

Enables or disables Modem controller.

LAN Controller:

Enables or disables the LAN controller.

Wireless LAN:

Enables or disables the Wireless LAN controller.
CPU Features Submenu of the Advanced Menu
The CPU Features submenu provides options for configuring the Intel SpeedStep power management features of the CPU.
PhoenixBIOS Setup Utility Security Power Savings Exit CPU Features Item Specific Help
SpeedStep(R) Technology: [Enabled] On Battery: [Battery Optimized] On AC: [Maximum Performance]
Select Enhanced Intel(R) SpeedStep(R) Technology enabled or disabled.
Figure 9. CPU Features Submenu
Table 9: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu

[Disabled] [Disabled] [Middle]
Configures the power button. *ACPI OS ignores this setting.
Figure 11. Miscellaneous Configurations Submenu
Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu of the Advanced Menu

Power Button:

Selecting Disabled disables the power button. Selecting Power Off allows you to turn off system power with the power button. Selecting Enabled allows the system to wake up when the internal LAN device receives a specific signal while in power-off state. Selecting Disabled disables this feature. Selects the initial volume setting for the system.
Disabled Power Off Disabled Enabled Off Minimum Middle Maximum

Wake up on LAN:

Volume Setting:

[Middle]

Event Logging Submenu of the Advanced Menu
The Event Logging submenu configures event logging features for DMI events.
PhoenixBIOS Setup Utility Security Power Savings Exit Event Logging Item Specific Help
Event Log Capacity: Event Log Validity: View Event Log: Event Logging: System Boot Event: Clear All Event Logs: Mark Events as Read:
Space Available Valid [Enter] [Enabled] [Disabled] [No] [Enter]
Press <Enter> key to view the contents of the event log.
Figure 12. Event Logging Submenu
Table 12: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Event Log Capacity: Event Log Validity: View Event Log: Event Logging:

Space Available Valid

Display only Display only Allows you to view content of event log Turns event logging on and off for all DMI events.
Enter Disabled Enabled Disabled Enabled No Yes Enter

[Enter] [Enabled]

System Boot Event: Clear All Event Logs: Mark Events as Read:
Turns event logging on and off for DMI system boot events.
When set to [Yes] all event logs will be cleared at next boot.

[Enter]

Allows you to mark all events currently in the event log as having been read.

Security Menu

SECURITY MENU SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to view the current data security configuration. (See Navigating through the Setup Utility on page 2 for more information.) The following tables show the names of the menu fields for the Security Menu and its submenus, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. The default condition is no passwords required and no write protection.

If you set a password, write it down and keep it in a safe place. If you forget the password you will have to contact your support representative to regain access to your secured functions and data.
Entering a password incorrectly 3 times in a row causes the keyboard and mouse to be locked out and the warning [System Disabled] to be displayed. If this happens, restart the computer by turning off and on the power with the power switch and use the correct password on reboot. If you make an error when re-entering the password a Warning will display on the screen. To try again press [Enter], then retype the password. Press [Esc] to abort the password setting process. If the Power Management Security is Enabled and the Password on Boot is Disabled you will not have to type your password upon resuming the system from the Suspend or Save-to-Disk modes. Power Management Security will work only if Password boot is enabled. Boot sector protection must be set to [Normal] to install or upgrade an operating system.
Supervisor Password Is: User Password Is: Set Supervisor Password Set User Password Minimum User Password Length: Password on Boot: On Automatic Wake up: KB Lock on Resume: Boot from Removable Media: Flash Write: Hard Disk Security Owner Information Security Chip Setting* Security Panel on Resume:
Clear Clear [Enter] [Enter] [0] [Disabled] [Disabled] [Disabled] [All] [Enabled] Press <Enter> key to set Supervisor Password to enable any password features. Then password entry is required to enter BIOS Setup.

Figure 13. Security Menu

Table 13: Fields, Options and Defaults for the Security Menu
Supervisor Password is: User Password is:
A display-only field. Set is displayed when the system supervisor password is set and Clear when it is not. A display-only field. Set is displayed when the general user password is set, and Clear when it is not. Sets, changes or cancels the Supervisor Password. The Supervisor Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a Supervisor Password is set it must be used to access the BIOS setup utility. This field can only be accessed if the Supervisor Password is set. Sets, changes or cancels the User Password. A User Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. To cancel a password press [Enter] key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a User Password is set it must be used to access the BIOS setup utility. Supervisor can set password length (0 to 8) for user password. User cannot set a password shorter than the minimum length. When set to First Boot, a password (User or Supervisor) is required just once after the Power On Self Test (POST) before the operating system will be read from a disk. When set to Every Boot, a password (User or Supervisor) is required every time after the Power On Self Test (POST) before the operating system will be read from a disk. When set to Disabled no password is required. When disabled, password entry is not required when the system wakes up automatically. When enabled, password entry is required upon wake up. When set to Enabled, the PS/2 mouse and keyboard inputs are locked out upon Resume from Suspend or Save to Disk mode until you enter the password. When set to Disabled no password is required. If no Supervisor Password is set, this feature is not available and no password is required. Supervisor only allows access to boot the computer to removable media after the Supervisor Password is entered. When disabled, the BIOS Flash memory will be write protected.

Set Supervisor Password

Set User Password
Minimum User Password Length: Password on Boot:
Disabled First Boot Every Boot
On Automatic Wake up: KB Lock on Resume:
Disabled Enabled Disabled Enabled
Boot from Removable Media: Flash Write:
All Supervisor only Disabled Enabled
Hard Disk Security: Owner Information: Security Chip Setting Security Panel on Resume:
Configures hard disk security features Sets Owner information.
Opens the Security Chip Setting submenu to configure the Security Chip. *Some model do not have this features. Enables or disables the Security Panel feature upon Resume from Suspend.

Enabled

Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys.
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.

Hard Disk Security

Primary Master Password Is: Secondary Master Password Is: Set Primary Master Password Set Secondary Master Password: Password Entry on Boot:
Clear Not Available [Enter] [Enter] [Enabled]
Figure 14. Hard Disk Security Submenu
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Primary Master Password Is:
Display-only. Default is Clear. When the Primary Master Password has been set, the field changes to Set. When this password is set, the primary hard disk drive cannot be used in another system unless the password is entered. Display-only. Default is Not Available. When Secondary Master Password has been set, the field changes to Set. When this password is set, the secondary (modular) hard disk drive cannot be used in another system unless the password is entered. Sets, changes or cancels the Primary Master Password. The Primary Master Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. When a Primary Master Password is set, it must be used to access the primary hard drive if it is used in another system. Note that the password will not take effect until the system has been rebooted. Sets, changes or cancels the Secondary Master Password. The Secondary Master Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. When a Secondary Master Password is set, it must be used to access the modular (secondary) hard drive if it is used in another system. Note that the password will not take effect until the system has been rebooted. When set to disabled, entry of a Hard Disk Password is not required before OS boot. (The hard disk is still password-protected without password entry.)

Secondary Master Password Is:

Not Available

Set Primary Master Password:
Set Secondary Master Password:

Password Entry on Boot:

Owner Information Submenu of the Security Menu
The Owner Information submenu is for setting owner information. Note that the owner information cannot be set without having entered a Supervisor Password.

Owner Information

Owner Information Is: Set Owner Information Foreground Color: Background Color:
Clear [Enter] [Gray] [Black]
Figure 15. Owner Information Submenu
Table 15: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Owner Information Is: Set Owner Information: Foreground Color:

Display only.

Field to write owner information, (i.e., name). Set foreground color.
Black Blue Green Cyan Red Magenta Black Blue Green Cyan Red Magenta
Brown White Gray Light Blue Light Green
Light Cyan Light Red Light Magenta Yellow Bright White

[Gray]

Background Color:

[Black]

Set background color.
Security Chip Setting Submenu of the Security Menu
The Security Chip Setting submenu is used to enable or disabled the embedded security chip.

Security Chip Setting

Security Chip:
Figure 16. Security Chip Setting Submenu
Allows you to enable or disable the security chip. Note that this is only active if a Supervisor Password has been entered. A reboot is required after exit to configure the Security Chip correctly. Clear Security Chip option becomes selectable after reboot.
BOOT MENU SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the BIOS searches sources for the operating system. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating through the Setup Utility on page 2 for more information.) The following tables show the names of the menu fields for the Boot menu and its submenu, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use.
PhoenixBIOS Setup Utility Security Power Savings Boot [Enabled] [Disabled] [Enabled] [Disabled] Item Specific Help
Quick Boot: Boot Time Diagnostic Screen: Boot Menu: Preboot Execution Environment: Boot Device Priority
[Disabled] All diagnostic tests will be done. [Enabled] Some diagnostic tests may be skipped while booting to speed up.

Exiting from Boot Menu When you have finished setting the boot parameters with the Boot Menu, you can either exit from the setup utility or move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys.
INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION
The Info Menu is a display only screen that provides the configuration information for your notebook. The following table shows the names of the menu fields for the Info menu and the information displayed in those fields. These fields are for information purposes only, and cannot be modified by the user (except for the Asset Number as in the Point below).
The information, including CPU type and speed, and total memory, displayed on this screen varies according to the unit you purchased.
PhoenixBIOS Setup Utility Security Power Savings Boot

Info Item Specific Help

BIOS Version: BIOS Date: BIOS Area: CPU Type: CPU Speed: L1 Cache: L2 Cache:
1.05 05/24/2004 E000h - FFFFh Intel(R) Pentium(R) M 1.60 GHz 64 KB 1024 KB
Total Memory: 256 MB Memory Slot 1: 256 MB DDR SDRAM Memory Slot 2: None

Figure 19. Info Menu

Table 19: Fields, Options and Defaults for the Info Menu Note that the parameters listed in the following table may be different, depending upon the system configuration.
BIOS Version: BIOS Date: BIOS Area: CPU Type: CPU Speed:
1.05 05/24/2004 E000h FFFFh Intel(R) Pentium(R) M 1.60 GHz
L1 Cache: L2 Cache: Total Memory: Memory Slot 1: Memory Slot 2:
64 KB 1024 KB 256 MB 256 MB DDR SDRAM None
EXIT MENU LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating through the Setup Utility on page 2 for more information.) The following table shows the names of the menu fields for the Exit menu, the default settings and a description of the field's function and any special information needed to help understand the field's use.
PhoenixBIOS Setup Utility Security Power Savings
Item Specific Help Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes
Exit System Setup and save your changes to CMOS.

Figure 20. Exit Menu

Table 20: Fields, Options and Defaults for the Exit Menu

Exit Saving Changes

Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory and then exit the setup utility. A confirmation message Save Configuration changes and exit now? [Yes] [No] will be displayed. Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS memory. When the BIOS recognizes this selection it will load the operating system and begin operation. Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit Menu. To return to another menu follow the directions in the Navigating Through the Setup Utility Section. Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load previous now? [Yes] [No] will be displayed. When confirmed the setup utility will return to the Exit menu. To return to another menu, follow the directions in the Navigating Through the Setup Utility Section. Selecting Save Changes will cause the new settings in all menus to be written to the BIOS memory. The message Save configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return to the Exit menu. To return to another menu, follow the directions in the Navigating Through the Setup Utility section.

Exit Discarding Changes Load Setup Defaults

Discard Changes

Save Changes