Reviews & Opinions
Independent and trusted. Read before buy Fujitsu S2110!

Fujitsu S2110

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Fujitsu S2110, size: 4.0 MB
Related manuals
Fujitsu S2110 Software Guide

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Fujitsu S2110Fujitsu Lifebook S2110/C Laptop LCD Screen 13.3" XGA CCFL Single (SUBSTITUTE Replacement LCD Screen ONLY. Not A Laptop ) S2110/C-6129-LCD
and RESOLUTION before you purchase this item - because some laptop models come with more than one type of screens

Details
Brand: FUJITSU
Part Number: S2110/C-6129-LCD
UPC: 022099273967

 

[ Report abuse or wrong photo | Share your Fujitsu S2110 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
slchen 5:53pm on Thursday, July 22nd, 2010 
I was recommended this the S2110 as a cheaper (and smarter) alternative to the new P7120 by a pretty good salesman at Funan Centre. Lightweight, long battery life and ready for 64-bit OS.Who could ask for more.
Hazel 3:14pm on Sunday, July 18th, 2010 
Use feeling: install your own xp sp2, all drive for success, but took for six hours. Other normal, bringing in the drive disc drive with 90%.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

LifeBook S2110

Value-priced ultra-portable at less than 1.7kg* Health and Environment friendliness with RoHS12 compliance Superb wireless performance with Super AG 9/Super G 9 network connection up to 108Mbps9 Brilliant SuperFine display for excellent movie and picture viewing
* with weight saver option
Processor OS Supported Display Modular Bay Device Memory Hard Disk Battery Weight Chipset Max. Memory Supported Hard Disk Drive Graphics High Definition (HD) Audio Communication User Interface
SINGAPORE: Fujitsu PC Asia Pacific Pte Ltd Tel : (65) Fax : (65) MALAYSIA: Fujitsu PC Asia Pacific Pte Ltd Tel : (60-3) Fax : (60-3) HONG KONG: Fujitsu PC Asia Pacific Ltd Tel : (852) Fax : (852) THAILAND: Fujitsu Systems Business (Thailand) Ltd PC Division Tel : (66-2) Fax : (66-2) AUSTRALIA & NEW ZEALAND: Fujitsu PC Australia Toll Free: 283 Tel : (61-2) Fax : (61-2) www.lifebook.com.au CHINA: Fujitsu PC China Division Tel : (86-21) Fax : (86-21) www.pc-cn.fujitsu.com PHILIPPINES: Fujitsu Philippines Inc. Tel : (63-2) Fax : (63-2) TAIWAN: Fujitsu Taiwan Ltd Tel : (886-2) Fax : (886-2) VIETNAM: Fujitsu Vietnam Ltd Tel : (84-4) 831 3895~7 Fax : (84-4) INDONESIA: PT Fujitsu Systems Indonesia Tel : (62-21) Fax : (62-21) www.fujitsu.com/id Note: For countries not listed above, please contact our Singapore office.
Card Slot Connector Interface Quick Launch Panel Media Playback Panel Security6 Dimensions AC Adapter Bundled Software Software on CD Port Replicator Modular Bay Options
Floppy Disk Drive Mini S-Video Cable Mouse
S2110 Recommended Configurations AMD Turion 64 MT-30 Mobile AMD Sempron 3000+ (1.60GHz, 1MB L2 cache, 1600MHz HTSB8) (1.80GHz, 128K L2 cache, 1600MHz HTSB8) Windows XP Home Edition XP Professional Windows 13.3" SuperFine XGA TFT, 1024 x 768 pixels DVD/CD-RW Combo Drive 512MB DDR 333MHz 256MB DDR 333MHz 80GB 40GB Up to 3.8hrs1 (6-cell Li-Ion 5200mAh) Up to 3.3hrs1 (6-cell Li-Ion 5200mAh) Approx. 1.65kg (w/ Weight Saver Option) Specifications ATI RADEON Xpress 200M + ATI SB400 2GB DDR 333MHz Ultra ATA-100, S.M.A.R.T. support5 ATI RADEON Xpress 200M, selectable 16/32/64/128MB shared memory11 with PCI Express 2D/3D graphics performance SigmaTel STAC9753 AC97 codec with built-in dual stereo speakers 56K V.922 Global Modem MDC1.5, IrDA 1.1 4Mbps3, 100/10Mbps4 Fast Ethernet and Super AG 9/ Super G 9 wireless connection with Dual Antenna Separate ON/OFF switch for wireless network connection Keyboard: 84-key, 19mm key pitch, 3mm key stroke Intelligent Touch Pad with configurable vertical and horizontal scroll functions Scroll Buttons PC Card Type II, Smart Card support5 Secured Digital/ Memory Stick PRO USB 2.0 x 3, VGA (external display), RJ45 (LAN), RJ11 (modem), Mini S-Video out, IEEE1394, Microphone-in, Headphone-out, Power Adapter DC-in, Port Replicator Interface Four Programmable Application Launch Buttons (Internet, Email and two other software) Four Functions: Stop/Eject, Play/Pause, Next, Previous BIOS Lock, Hard Disk Lock, Anti-theft Lock Slot, Smart Card support5 293mm (W) x 236.5mm (D) x 30.5mm min (H) Bundled Accessories Input AC 100~240V, Output DC 16V 60W CyberLink PowerDVD, CyberLink PowerProducer Gold, Sonic RecordNow DX, Sonic DLA, Adobe Acrobat Reader 6.0, Fujitsu Update Navi10, Fujitsu Hardware Diagnostic Tool, Fujitsu Display Manager 1 year Full Licensed Norman Virus Control with Sandbox Technology, Norman Personal Firewall, Acronis True Image 8.0 Personal Edition Optional Accessories Connector Interface: USB 2.0 x 2, VGA (external display), RJ45 (LAN), PS/2 (keyboard/mouse), Serial, Parallel, Power Adapter DC-in Replaceable with - Bay Battery, 6-cell Li-Ion 3800mAh, up to 6.5hrs1 battery life (Standard + Bay Batteries) - Dual Layer DVD Super Multi Writer7 - DVD/CD-RW Combo Drive - Weight Saver External USB 1.44MB FDD Converts Mini S-Video out port to standard S-Video out port. Use a S-Video Cable for connection to a TV USB Optical Scroll Mouse
The above information shows the general technical specifications of the product and does not represent actual configuration. For specific configurations and their availability, please check with your local distributors. 1 Results obtained from Mobile Mark 2002 performed on systems with maximum battery life settings. Actual battery life will vary based on screen brightness, sound volume settings, running applications, connected peripherals, power management settings, battery conditioning, and other customer preferences. Modular Bay devices or hard drive usage may also have a significant impact on battery life. Note: Up to 6.5hrs batery life is based on AMD Turion 64MT-30 configuration with standard battery and bay battery. 2 Maximum 56Kbps performance varies according to your local service providers' services as well as line condition. V.92 performance is dependent on local service providers' services. 3 This term does not represent actual data rate of 4Mbps and simply indicates compliance with IrDA standard specification 1.1. Actual maximum data rate depends on local configurations and connected devices. 4 This term does not represent actual data rate of 100/10Mbps and simply indicates compliance with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab standards. Actual maximum data rate depends on network configurations, cable conditions as well as connected devices. 5 Smart Card support requires a Smart Card adapter for the PC Card Slot. This is available as an accessory. Fujitsu does not provide the application for Smart Card Solution. 6 BIOS Lock needs a supervisor/user password to access BIOS setup. BIOS settings can be configured to prompt for password at every first bootup or all bootup sequences. Access to BIOS setup is needed to configure Hard Disk Lock. Hard Disk Lock requires an access key to retrieve data on the hard disk. This is a Data Confidentiality security feature. Anti-theft Lock Slot allows the use of a lock to physically secure the LifeBook. SmartCard usage is dependent on customer's solution. NOTE: Loss of password requires the LifeBook to be returned to Japan factory for system refresh. Cost of shipment and lost data will be borne by the customer. 7 Supports DVD multi formats such as DVD-RAM, DVD+RW, DVD+R DL, DVD+R, DVD-RW, DVD-R, CD-RW, CD-R, CD-ROM and DVD-ROM. 8 This refers to HyperTransport System Bus (HTSB) up to 1600MHz full duplex. 9 Super AG and Super G are registered trademarks of Atheros Communications. Super AG and Super G modes deliver up to 108 Mbps raw data rate with typical end user throughput exceeding 60 Mbps in a wireless network environment where wirelessly connected equipement are using Atheros Super AG or Super G enabled chipsets. 10 Update Navi is a Fujitsu Proprietary application that updates LifeBook drivers by connecting automatically to Fujitsus server. This will help update your LifeBook with the latest software drivers and utilities to ensure compatibility between hardware and software, maintaining smooth operation anytime, anywhere. 11 Memory allocation (max. 128MB) can be pre-set in the BIOS setup for optimal graphics and system performance. The memory size available to the Operating System will be less than the total size of installed memory modules. 12 RoHS (Restriction on Hazardous Substances) compliance means the system and its internal components comply with the EU RoHS directive (2002/95/EC) on the restricted use of six hazardous substances in the manufacture of the system and its internal components. It is natural for all thin-film transistor (TFT) liquid crystal displays (LCD) to show a small number of missing or discoloured dots. These are commonly known as non-conforming pixels. This is a technology limitation of TFT LCD and does not represent a defect. Fujitsu warranty does not cover limitations in technology such as non-conforming pixels. Specifications reflected above are engineering and hardware specifications. They do not represent actual usage or operating dimensions, sizes, performances and weights as these are dependent on factors such as operating temperature, type of operating system and application used, connected devices and accessories as well as hardware configurations of the notebook. Please check the compatibility of 3rd party accessories before purchase. Ambient temperature: 5 to 35C / 41 to 95F (operating), -10 to 60C / 14 to 140F (non-operating). Relative humidity: 20% to 80% RH (operating and non-operating). ATI, MOBILITY and RADEON are used under license and are registered trademarks of ATI Technologies Inc. in the United States and other countries. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. Super G and Super AG are registered trademarks of Atheros Communications. Inc.

www.pc-ap.fujitsu.com

All rights to the mentioned trademarks reside with their respective owners. Fujitsu endeavours to ensure that the information in this documentation is correct and fairly stated, but does not accept liability for any errors or omissions. The development of Fujitsu products and services is continuous and published information may not be up to date. It is important to check the current position with Fujitsu. The document is not part of the contract or licence save in so far as may be expressly agreed.

Dealer:

JOB NO.: 6312 Printed by Fujitsu PC Asia Pacific Pte Ltd in December 2005. Information is correct at time of printing.

doc1

BIOS SECTION S2110

LifeBook S Series Notebook BIOS

S Series BIOS

BIOS SETUP UTILITY
The BIOS Setup Utility is a program that sets up the operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, therefore there should be no need to set or change the BIOS environment to operate your notebook. The BIOS Setup Utility configures:
Selecting a field causes a help message about that field to be displayed on the right-hand side of the screen. Pressing the Enter key with the highlight on a selection that is not a submenu or auto selection will cause a list of all options for that item to be displayed. Pressing the Enter key again will select the highlighted choice.
Device control feature parameters, such as changing I/O addresses and boot devices. System Data Security feature parameters, such as passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility do the following: 1. Turn on or restart your notebook. 2. Press the [F2] key when a message appears under the Fujitsu logo prompting you to Press <F2>: BIOS Setup. This will open the main menu of the BIOS Setup Utility with the current settings displayed. 3. Press the arrow keys to scroll through the other setup menus to review or alter the current settings.
7. Pressing the [F9] key resets all items in the BIOS to the default values. 8. Pressing the [F10] key saves the current configuration and exits the BIOS Setup Utility. You will be asked to verify this selection before it is executed. 9. Pressing the [F1] key gives you a general help screen.
Entering the Setup Utility After a Configuration Change or System Failure
If there has been a change in the system configuration that does not agree with the parameter settings stored in your BIOS memory, or there is a failure in the system, the system beeps and/or displays an error message after the Power On Self Test (POST). If the failure is not too severe, it will give you the opportunity to modify the settings of the setup utility, as described in the following steps: 1. When you turn on or restart the computer there is a beep and/or the following message appears on the screen: Error message - please run SETUP program Press <F1> key to continue, <F2> to run SETUP 2. If an error message is displayed on the screen, and you want to continue with the boot process and start the operating system anyway, press the [F1] key.
Navigating Through the Setup Utility
The BIOS setup utility consists of six menus: Main, Advanced, Security, Boot, Info and Exit. This document explains each menu in turn including all submenus and setup items. The following procedures allow you to navigate the setup utility menus:
], [ ]. 1. To select a menu, use the cursor keys: [ 2. To select a field within a menu or a submenu, use the

cursor keys:

[ ], [ ].
3. To select the different values for each field, press the [Spacebar] to change to the next higher selection and [F5] or [-] to go to the next lower selection. 4. To activate a submenu press the [Enter] key. 5. To return to a menu from a submenu, press the [Esc] key. 6. To go to the Exit menu from any other menu, press the [Esc] key.
If your notebook emits a series of beeps that sounds like a code and the display is blank, refer to the Troubleshooting section of your system Uses Guide. The Troubleshooting Section includes a list of error messages and their meanings. If your data security settings require it, you may be asked for a password before the operating system will be opened.

Main Menu

3. If an error message is displayed on the screen, and you want to enter the setup utility, press the [F2] key. 4. When the setup utility starts with a fault present, the system displays the following message: Warning! Error message [Continue] 5. Press any key to enter the setup utility. The system will then display the Main Menu with current parameters values.
MAIN MENU SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set or view the current system parameters. Follow the instructions for Navigating Through The Setup Utility to make any changes. (See Navigating Through the Setup Utility on page 2 for more information) The following tables show the names of the menu fields for the Main menu and its submenus, all of the options for each field, the default settings and a description of the fields function and any special information needed to help understand the fields use. Note that the actual drive labels shown may vary.
System time and date can also be set from your operating system without using the setup utility. Use the Date and Time icon on your Windows Control panel or type time or date from the MS-DOS prompt.

Figure 2. Primary Master Submenu

[Auto]

Select Auto to have the type of Serial or Parallel ATA device automatically identified by the BIOS at POST. If None is selected, the following Set-up items do not appear. Logical Block Addressing (LBA)

Auto None

LBA Format Total Sectors: Maximum Capacity: Multi-Sector Transfers:

----

The total number of sectors on your hard disk The maximum capacity of your hard disk
Disabled 2 Sectors 4 Sectors 8 Sectors 16 Sectors Disabled Enabled

[16 Sectors]

This option cannot be changed when Auto is selected.

LBA Mode Control:

[Enabled]
Enables or disables logical Block Addressing in place of Cylinder, Head, Sector addressing. This option cannot be changed when Auto is selected.

Transfer Mode:

[Multiword DMA 2]
Selects the method for moving data to/from the drive. Autotype the drive to select the optimum transfer mode. This option cannot be changed when Auto is selected.
Standard Fast PIO 1 Fast PIO 2 Fast PIO 3 Fast PIO 4 Multiword DMA 1 Multiword DMA 2 Disabled Mode 0 Mode 1 Mode 2 Mode 3 Mode 4 Mode 5

Ultra DMA Mode:

[Disabled]
A bootable DVD/CD-ROM may have either a floppy disk or hard drive format. When the bootable DVD/ CD-ROM is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format DVD/CD-ROM is used, the DVD/CD-ROM becomes Drive A. The DVD/CD-ROM will only take drive C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable DVD/ CD-ROM can never use a C: designation if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your application software will use the new designations. Be aware of the operating environment when booting from a DVD/CD-ROM or you may overwrite files by mistake.
Secondary Master Submenu of the Main Menu
The Secondary Master submenu is for the internal DVD/ CD-ROM drive. The drive type is displayed on this menu as well as the Main menu. Your notebook autosenses the characteristics of the internal drive installed. You will not need to modify these settings; they are displayed for your reference. Note that actual drive labels shown may vary.
PhoenixBIOS Setup Utility Main Secondary Master [MATSHITADVD-RAM UJ-840S-(SM)] Item Specific Help

Type: Multi-Sector Transfers: LBA Mode Control: Transfer Mode: Ultra DMA Mode:
[Auto] [Disabled] [Disabled] [Standard] [Disabled]
Figure 3. Secondary Master Submenu
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Selects the ATA/ATAPI device type. Select Auto to have the device (CD-ROM, CD-R/RW, DVD-ROM, etc.) automatically identified by the BIOS at POST. If None is selected, the following Set-up items do not appear. This option cannot be changed when Auto is selected. Specify the number of sectors per block for multiple sector transfer.

Multi-Sector Transfers:

Enables or disables Logical Block Addressing in place of Cylinder, Head, Sector addressing. This option cannot be changed when Auto is selected.

[Standard]

Exiting from Main Menu When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu or to move to another menu.
ADVANCED MENU SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to: Set the I/O addresses for the serial, parallel, and infrared ports (note that serial and parallel ports are found only on the optional port replicator). Set the features of the keyboard/mouse. Select between the display panel and/or an external CRT display. Set internal device configurations Configure USB features. Configure miscellaneous features such as Wake Up On LAN. Configure DMI Event Logging. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through the Setup Utility on page 2 for more information) The following tables show the names of the menu fields for the Advanced Menu and its submenus, all of the options for each field, the default settings and a description of the fields function, and any special information needed to help understand the fields use.
Serial/Parallel Port Configurations Keyboard/Mouse Features Video Features Internal Device Configurations USB Features Miscellaneous Configurations Event Logging
Configures serial ports and parallel ports

Figure 4. Advanced Menu

Advanced Menu
Table 4: Fields, Options and Defaults for the Advanced Menu
Serial/Parallel Port Configurations
When selected, opens the Serial/Parallel Port Configurations submenu which allows the user to modify settings for the serial, parallel, and internal ports. The serial and parallel ports are found on the optional port replicator. When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and internal keyboard and mouse parameters. When selected, opens the Video Features submenu, which allows setting of the display parameters, including routing of video signals to different displays. When selected, opens the Internal Device Configuration submenu, which allows enabling or disabling the modem, IDE, and LAN Controllers. Configures USB features. Configures miscellaneous features, such as Wake Up On LAN and Power Button.

Keyboard/Mouse Features Video Features
Internal Device Configurations USB Features Miscellaneous Configurations Event Logging
When selected, opens the event logging submenu.
Serial/Parallel Port Configuration Submenu of the Advanced Menu
The Serial/Parallel Port Configuration submenu provides the ability to set the I/O addresses and interrupt levels for the serial, parallel, and internal ports of your notebook and optional port replicator.
To prevent IRQ and address conflicts, avoid changing the default settings.
The BIOS will warn you of resource conflicts by placing a yellow asterisk next to each device that is in conflict. All I/O addresses in Table 5 are in hexadecimal.
I/O addresses, DMA channels, and Interrupt levels can be entered in various ways, including via the BIOS setup utility, the control software for the I/O device, or the hardware. If any two ports or devices, serial or parallel, have the same I/O address assigned your notebook will not function normally. Please keep a record of original settings before making any changes in the event that a restoration is required. See your hardware and software documentation as well as the setup utility to determine settings, limitations, etc.
PhoenixBIOS Setup Utility Advanced Serial/Parallel Port Configurations Serial Port: I/O Address: Interrupt: Infrared Port: Mode: I/O Address: Interrupt: I/O Address: DMA Channel: Parallel Port: Mode: I/O Address: Interrupt: [Enabled] [3F8-3FF] [IRQ 4] [Enabled] [FIR] [2E8 - 2EF] [IRQ 3] [480-4BF] [DMA 3] [Enabled] [Bi-directional] [378-37F] [IRQ 7] Item Specific Help [Disabled] The port is disabled. [Enabled] The port is enabled with user configuration. [Auto] Plug & Play OS configure the port.
Figure 5. Serial/Parallel Port Configuration Submenu
Table 5: Fields, Options and Defaults for Serial/Parallel Port Configuration Submenu of Advanced Menu

Menu Field Menu Field

Serial Port:

Options Options

Default Default

Description Description
Configures the serial port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the BIOS or OS to choose the configuration (Auto). Allows user to set the serial port base I/O address when serial port is Enabled.
Disabled Enabled Auto 3F8 - 3FF 2F8 - 2FF 3E8 - 3EF 2E8 - 2EF IRQ 3 IRQ 4 IRQ 10 IRQ 11 Disabled Enabled Auto IrDA FIR 3F8 - 3FF 2F8 - 2FF 3E8 - 3EF 2E8 - 2EF IRQ 3 IRQ 4 IRQ 10 IRQ 11 480-4BF 500-53F 580-5BF DMA 1 DMA 3 Disabled Enabled Auto Output Only Bi-directional ECP

I/O Address:

[3F8 - 3FF]

Interrupt:

[IRQ 4]
Allows user to set the serial port interrupt when serial port is Enabled.

Infrared Port:

Configures the infrared port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the BIOS or OS to choose the configuration (Auto). When the infrared port is enabled this option is available allowing the user to set the mode for the infrared port. Standard IrDA (IrDA 1.0) transmits data at up to 115.2 Kbps; FIR (IrDA 1.1) transmits at up to 4Mbps. Allows user to set the infrared port I/O address when the infrared port is Enabled.

[2E8 - 2EF]

[IRQ 3]

Allows user to set the infrared port interrupt when the infrared port is Enabled.

480-4BF

Allows user to set the FIR port I/O address when the infrared port is Enabled.
DMA Channel: Parallel Port:

[DMA 3] [Enabled]

Allows user to set the infrared port DMA Channel when the infrared port mode is set to FIR. Configures the parallel port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the BIOS or OS to choose the configuration (Auto). When the parallel port is enabled this option is available allowing the user to set the mode for the parallel port. Bi-directional allows two-way transfer of information between your notebook and a parallel device. Output Only (Half Duplex) allows information to be transferred in only one direction, from your notebook to the printer or similar device. ECP Mode allows communication with the ECP class of parallel I/O devices. Allows user to set the parallel port base I/O address when the parallel port is Enabled.

[Bi-directional]

378 - 37F 278 - 27F 3BC - 3BF IRQ 5 IRQ 7

[378 - 37F]

[IRQ 7]
Allows user to set the parallel port interrupt when the parallel port is Enabled.
Keyboard/Mouse Features Submenu of the Advanced Menu
The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard.
PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help

Keyboard/Mouse Features

Numlock: [Auto] Hot Plug: [Enabled] Internal Pointing Device: [Auto Disabled] Initialization on Resume: [Fast]
Selects power-on state for Numlock.
Figure 6. Keyboard/Mouse Features Submenu
Table 6: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu

Numlock:

Sets the NumLock function state when the computer completes booting.
Auto On Off On/Padlock Off Disabled Enabled Auto Disabled Manual Setting Always Enabled Always Disabled

Hot Plug:

Enables and disables the ability to plug a mouse or keyboard into the PS/2 port and have it immediately recognized and active. Sets the device controlling the mouse cursor on the screen. Always Enabled makes the pointing device always enabled whether there is an external mouse or not. Always Disabled makes the pointing device always disabled. Auto Disabled disables the internal pointing device when an external pointing device is connected to the PS/2 port. When Fast is selected, initialization for the external devices is optimized to speed up on Resume. When Normal is selected, initialization is not optimized.

Disabled Enabled

SCSI SubClass Support:
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations Submenu configures the miscellaneous features for your system.
Miscellaneous Configurations
Power Button: Wake up on LAN: Volume Setting: UMA Video Memory Size:
[Disabled] [Disabled] [Middle] [32MB]
Configures the power button. *ACPI OS ignores this setting.
Figure 10. Miscellaneous Configurations Submenu
Table 10: Fields, Options and Defaults for the Miscellaneous Configurations Submenu

Power Button:

When Disabled is selected, the power button does not respond to a press. When Power Off is selected, the button turns the power off. When Enabled is selected, the system will wake up when the internal LAN device receives a Magic Packet while the system is powered off. Allows you to set or disable the system volume level.
Disabled Power Off Disabled Enabled Off Minimum Middle Maximum 16MB 32MB 64MB 128MB

Wake up on LAN:

Volume Setting:

[Middle]

UMA Video Memory Size:

[32MB]

Allows you to select the amount of video memory you want to reserve for video memory.
Event Logging Submenu of the Advanced Menu
The Event Logging Submenu configures event logging features for DMI events.

Event Logging

Event Log Capacity: Event Log Validity: View Event Log: Event Logging: System Boot Event: Clear All Event Logs: Mark Events as Read:
Space Available Valid [Enter] [Enabled] [Disabled] [No] [Enter]
Press <Enter> key to view the contents of the event log.
Figure 11. Event Logging Submenu
Table 11: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Event Log Capacity: Event Log Validity: View Event Log: Event Logging:

Space Available

Display only.
Valid Enter Disabled Enabled Disabled Enabled No Yes Enter [Enter] [Enabled]
Display only. Allows you to view content of event log. Turns event logging on and off for all DMI events.
System Boot Event: Clear All Event Logs: Mark Events as Read:
Turns event logging on and off for DMI system boot events.
When set to [Yes] all event logs will be cleared at next boot.

[Enter]

Allows you to make all events currently in the event log as read.
SECURITY MENU SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to view the current data security configuration. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through the Setup Utility on page 2 for more information) The following tables show the names of the menu fields for the Security menu and its submenus, the options for each field, the default settings and a description of the
Entering a password incorrectly three times in a row will cause the keyboard and mouse to be locked out and the warning [System Disabled] to be displayed. If this happens, restart the computer by turning off and on the power with the power switch and use the correct password on reboot.
field's function and any special information needed to help understand the field's use. The default condition is no passwords required and no write protection.
If you set a password, write it down and keep it in a safe place. If you forget the password you will have to contact your support representative to regain access to your secured functions and data. If you make an error when re-entering the password a [Warning] will be displayed on the screen. To try again press the [Enter] key and then retype the password. Press the [Esc] key to abort the password setting process. If the Password on Boot is Disabled you will not have to type your password upon resuming the system from the Suspend or Save-to-Disk modes.
Supervisor Password Is: User Password Is: Set Supervisor Password Set User Password Minimum User Password Length: Password on Boot: On Automatic Wake up: KB Lock on Resume: Boot from Removable Media: Flash Write: Hard Disk Security Owner Information
Clear Clear [Enter] [Enter] [0] [Disabled] [Disabled] [Disabled] [All] [Enabled] Press <Enter> key to set Supervisor Password to enable any password features. Then password entry is required to enter BIOS Setup.

Figure 12. Security Menu

Security Menu

Table 12: Fields, Options and Defaults for the Security Menu
Supervisor Password is: User Password is:
A display-only field. Set is displayed when the system Supervisor Password is set and Clear when it is not. A display-only field. Set is displayed when the general User Password is set, and Clear when it is not. Sets, changes or cancels Supervisor Password. The Supervisor Password may be up to seven characters long and include only letters or numbers (no symbols). Passwords are NOT case- sensitive. To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a Supervisor Password is set it must be used to access the BIOS setup utility. This field can only be accessed if the Supervisor Password is set. Sets, changes or cancels the User Password. The User Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a User Password is set it must be used to access the BIOS setup utility. Sets the minimum length for User Password.

Set Supervisor Password

Set User Password
Minimum User Password Length: Password on Boot:
Disabled First Boot Every Boot
When Enabled, a password (User or Supervisor) is required after the Power On Self Test (POST) before the operating system will be read from a disk. When set to Disabled no password is required. If no Supervisor Password is set this feature is not available and no password is required. This field is active only when Password On Boot is set to First Boot or Every Boot. When disabled, password entry is not required on automatic wake up on LAN or Real Time Clock. When enabled, the password is still required on automatic wake up. When set to Enabled, the PS/2 keyboard and mouse inputs are locked out upon Suspend from Resume or Save-to-Disk mode until the password is entered. When both passwords are set, the User password is always used to lock. Password entry before OS boot is disabled upon unattended boot. Enable password allows supervisor access only.

On Automatic Wake up:

KB Lock on Resume:
Boot from Removable Media: Flash Write:
All Supervisor only Disabled Enabled
When disabled, the BIOS Flash memory is write protected.

Hard Disk Security:

When selected, opens the Hard Disk Security submenu, which allows you to configure hard disk security features. When selected, opens the Owner Information submenu, which allows you to set Owner information.

Owner Information:

Hard Disk Security Submenu of the Security Menu
The Hard Disk Security Submenu is for configuring hard disk security features.

Hard Disk Security

Primary Master Password Is: Secondary Master Password Is: Set Primary Master Password Set Secondary Master Password
Clear Not Available [Enter] [Enter]
Password Entry on Boot: [Enabled]
Figure 13. Hard Disk Security Submenu
Table 13: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Primary Master Password Is:: Secondary Master Password Is: Set Primary Master Password
A display-only field. Set is displayed when the Master Password is set and Clear when it is not. A display-only field. Not Available is displayed.
Sets, changes or cancels Primary Master Password. The Primary Master Password may be up to seven characters long and include only letters or numbers (no symbols). Passwords are NOT case- sensitive. To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a Primary Master Password is set it must be used to access the hard disk. Data on the hard disk cannot be read on other systems. Not currently available.
Set Secondary Master Password Password Entry on Boot:
When this is disabled, it is not necessary to enter the password before booting.The hard disk is still password-protected without entering a password.
Owner Information Submenu of the Security Menu
The Owner Information Submenu is for setting owner information. Note that Owner Information cannot be set without having entered a supervisors password.

Owner Information

Owner Information Is: Set Owner Information Foreground Color: Background Color:
Clear [Enter] [Gray] [Black]
Figure 14. Owner Information Submenu
Table 14: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Owner Information Is: Set Owner Information: Foreground Color:
Field to write owner information, e.g., your name. Set foreground color.
Black Blue Green Cyan Black Blue Green Cyan
Red Magenta Brown White Red Magenta Brown White
Gray Light Blue Light Green Light Cyan Gray Light Blue Light Green Light Cyan
Light Red Light Magenta Yellow Bright White Light Red Light Magenta Yellow Bright White

[Gray]

Background Color:

[Black]

Sets background color.
Exiting from the Security Menu

When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys.
BOOT MENU SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the BIOS searches sources for the operating system. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through the Setup Utility on page 2 for more information) The following tables show the names of the menu fields for the Boot menu and its submenu, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use.
PhoenixBIOS Setup Utility Security Boot Info Exit Item Specific Help
Quick Boot: Boot Time Diagnostic Screen: Boot Menu: Preboot Execution Environment: Boot Device Priority
[Enabled] [Disabled] [Enabled] [Disabled]
[Disabled] All diagnostic tests will be done. [Enabled] Some diagnostic tests may be skipped while booting to speed up.
Table 15: Fields, Options and Defaults for the Boot Menu

Quick Boot:

Select Item -/Space Change Values Select Sub-Menu Select Menu Enter

Figure 15. Boot Menu

Turns on and off booting with a truncated set of Power On Self Tests. (Fewer tests mean faster turn on.) Turns on and off display of test results instead of Fujitsu logo screen during Power On Self Test. When disabled, the boot menu is disabled and the F12 key is ignored. When enabled, the boot menu is enabled. Note: This field cannot be changed unless the Supervisor Password is set. Turns on and off boot from network server options.
Disabled Enabled Disabled Enabled Disabled Enabled
Boot Time Diagnostic Screen: Boot Menu:
Preboot Execution Environment: Boot Device Priority:
Selects the Boot Device Priority submenu

BIOS Version: BIOS Date: BIOS Area: CPU Type: 1.03 05/30/2005 E000h FFFFh AMD Turion(tm)64 Mobile Technology MT 128 KB
L2 Cache: Total Memory: Memory Slot 1: Memory Slot 2: 512 MB None

512 MB DDR SDRAM

L1 Cache:

Exit Menu

EXIT MENU LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through the Setup Utility on page 2 for more information). The following table shows the names of the menu fields for the Exit menu, the default settings and a description of the field's function and any special information needed to help understand the field's use.
Main Advanced PhoenixBIOS Setup Utility Security Boot Exit Item Specific Help Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Save Changes and Power Off
Exit System Setup and save your changes to CMOS.
-/Space Change Values Select Sub-Menu Enter

Figure 18. Exit Menu

Table 18: Fields, Options and Defaults for the Exit Menu

Exit Saving Changes

Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory and then exit the setup utility. A confirmation message Save Configuration changes and exit now? [Yes] [No] will be displayed. Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS memory. When the BIOS recognizes this selection it will load the operating system and begin operation. Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit Menu. To return to another menu follow the directions in the Navigating Through the Setup Utility Section. Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load previous now? [Yes] [No] will be displayed. When confirmed the utility will return to the Exit menu. To return to another menu, follow the directions in the Navigating Through the Setup Utility Section. Selecting Save Changes causes the new settings in all menus to be written to the BIOS memory. The message Save configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return to the Exit menu. To go to another menu, follow the directions in the Navigating Through the Setup Utility section. Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS memory, then power the system off. The message Save configuration changes now and power off? [Yes] [No] will be displayed. When confirmed, the setup utility shut down the system. 27

Exit Discarding Changes Load Setup Defaults

Discard Changes

Save Changes
Save Changes and Power Off

 

Tags

Viper 90 PCG-SRX51p-A Mojito 50 R-15 R-30 PC-1350 Ru 440 Vluu NV10 DMR-EX75EB EP-85 MG-5886AL F-204RDS MX6447 21XX MAX BAR338PA SA-PM88 Altos R720 Samsung E250 Gpsmap 500 WR250F-2007 Express 121 Plus Pink MP-233 QW-2738 ASD 7U MAC 335 CF-560R C10 DMC-T26 IC-V80 NAS-SC55PKE History 125 SC-HT730 SC-NC9 Canon I80 LS753 NWZ-S544BLK RA-01 Gts 1988 XM-ZR1852 Seiko 7C46 Srlp18 Gdvdr320hdmib DCD-1650AR Rotary Iron MX-700 Timex W-33 Sportback SA-VE525 Control Driver Download Kyocera 7135 WD-1050F E52 PTI Wlmg 1015 Nokia 6100 Driver GT-X970 Samsung 913V FS100 Preset LFX25960SW Amarys 1600 FH-P6200 251-22 S820D KDL-32E5500 Bios Express 2 B3101-4-M UK SRU5040-19 VGN-NS10l S Review SRF-M807 Regal MZ-E40 Aastra M310 BTS10 Nokia 1006 ML-7300 Peugeot 207 KRF-V9993D CJ-N75CL AML 125 66 Maxi CDX-GT530UI DA-16 Gpsu01 Micro X Asus VW19 YP-T9jaby CGL409W Manual 630UA Speakers Battery Prime CMP4121HDE WD-N80068 Gigaset A110 42PFL7433D CQ-C3400U Visualiser Wireless 4 Plus FAX-LAB 220 Fan 9219-2

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101