2002 Hewlett-Packard Company
Compaq Presario 6000xx, 6100xx, 6200xx and 6300xx Series Desktop
Illustrated Parts Map Compaq Presario Desktop Family of Personal Computers Microtower Models, Pentium Processors
Compaq, the Compaq logo, and Presario are trademarks of Compaq Information Technologies Group, L.P. Intel, Celeron, and Pentium are trademarks of Intel Corporation in the United States and other countries. All other product names mentioned herein may be trademarks of their respective companies.
Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided as is without warranty of any kind and is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. September 2002
Standard and Optional Boards
Document Part Number 310570-001
1 System board for Intel processor, with thermal grease 289767-xxx Memory Modules 2 * * 128 MB RAM, DDR 256 MB RAM, DDR 512 MB RAM, DDR 1 GB RAM, DDR 237121-xxx 237122-xxx 257526-xxx 286403-xxx 289580-xxx
Front I/O board kit - USB and 1394, includes: 3 * * I/O board (287432-003) USB cable assembly (245151-003) I/O and 1394 Cable assembly (163607-003)
Front I/O board kit - USB, includes: * * I/O board (283075-001) USB cable assembly (245151-003)

289581-xxx

PCI, 56 kbs Modems * * * Condor 2K1 PCI Modem Patriot II PCI Modem (American continent) Stinger PCI Modem (International use) 240381-xxx 272360-xxx 243560-xxx
Intel Celeron Processors with thermal grease * * 1.7 GHz 1.8 GHz 293004-xxx 308574-xxx
Intel Pentium P4 Processors with thermal grease 4 * * * * * * 2.8 GHz\512K cache, 533 FSB 2.66 GHz\512K cache, 533 FSB 2.53 GHz\512K cache, 533 FSB 2.4 GHz\512K cache, 533 FSB 2.26 GHz\512K cache, 533 FSB 2.4 GHz\512K cache 2.0 GHz\512K cache 305580-xxx 305579-xxx 305572-xxx 291181-xxx 290978-xxx 267926-xxx 284339-xxx
Graphics Controllers * * Cables Miscellaneous cable kit, includes: 1 System Unit Chassis assembly, includes: 3 * 4 * * Access panel Chassis Power supply, PFC (EMEA only) Power supply, non-PFC Front bezel, includes: Bezel, front insert, 2 USB (263946-001) Bezel, front insert, USB, 1394 (263946-003) 289769-002 289768-xxx 282098-xxx * * * 282867-xxx * 2 Diskette drive cable (238078-005) IDE UATA dual device, hard drive/CD-ROM data cable, 15.5 (108950-024) IDE UATA dual device, hard drive/CD-ROM data cable, 18 (108950-025) Audio cable, 18 (171891-009) 1394 Y cable (296563-003) Power Switch/LED cable with switch and LEDs Cable kit for AIW graphics Cable kit for AIW graphics, remote 287077-xxx 280567-xxx 307073-xxx 259967-xxx * * * * * * nVidia Quadro4 200, 64 MB memory, TV (P71) nVidia Quadro4 200, 64 MB memory, TV (P73) nVidia Quadro4 750, 128 MB memory, TV nVidia GeForce 4 (NV25 chipset) nVidia GeForce 5 (NV30 chipset) ATI Radeon 9700 Pro ATI Radeon 7500 with PAL ATI Radeon 7500 with NTSC ATI Radeon 7000 * ATI AIW Radeon 8500DV, 128 MB memory, TV 267526-xxx 290855-xxx 267527-xxx 302325-xxx 302324-xxx 304201-xxx 291584-xxx 291585-xxx 291586-xxx 261753-xxx

Other Cards * * * * 1394 PCI card with 2 ports and cable 163607-003 PCI expansion card SoundBlaster PCI audio card Audigy 6-channel audio card 287476-xxx 252609-xxx 233889-xxx 280562-xxx

*Not shown

* Not shown * Not shown
Keyboards (not illustrated) Easy Access Keyboard Arabic Belgian Danish Finnish French Italian International Mass Storage Devices (* not shown) 1 * * * * * * * * * * * * * * * 2 * * GB\5400 RPM Hard drive 30 GB\7200 RPM Hard drive 40 GB\5400 RPM Hard drive 40 GB\7200 RPM Hard drive 30 GB\5400 RPM Hard drive 60 GB\5400 RPM Hard drive 60 GB\5400 RPM Hard drive 80 GB\7200 RPM Quiet hard drive 120 GB\7200 RPM Hard drive 180 GB\5400 RPM Hard drive 180 GB\5400 RPM Hard drive 240 GB\5400 RPM Hard drive R/RW CD ROM drive 40/10/40X R/RW CD ROM drive 48/12/48X 48X CD-ROM drive 16X DVD drive R/RW DVD drive 8/4/2/24/4X R/W DVD drive 16/40X DVD drive Diskette drive 197799-xxx 210514-xxx 173342-xxx 221424-xxx 201527-xxx 230391-xxx 260443-xxx 240319-xxx 248877-xxx 304976-xxx 304977-xxx 304978-xxx 286303-xxx 299173-xxx 278639-xxx 278647-xxx 278648-xxx 289591-xxx 301951-xxx 278644-xxx To determine the correct dash number for a spare part, follow the rules below: 1. If the 2nd digit of the serial number is numeric, use -001. 2. If the 2nd digit of the serial number is D, use -002. 3. If the 2nd digit of the serial number is H, use -004. Miscellaneous Parts 3 * # * * * * Front bezel assembly, includes Bezel, front insert, 2 USB (263946-001) Bezel, front insert, 2 USB, 2 audio, 1394 (263946-003) Chassis fan Heatsink with fan Mouse, 2-button with ratchet wheel Mouse, optical Mouse, wireless Mouse, wireless, Intellimouse 289577-xxx 289579-xxx 279155-xxx 266654-xxx 282868-xxx 291387-xxx 282098-xxx Legend for Dash Numbers Latin American Spanish Norwegian -171 -181 -081 -351 -051 -061 -B31 -161 -091 281242-xxx Portuguese Spanish Swedish Swiss Taiwanese Thai United Kingdom U.S. U.S. -131 -071 -101 -111 -AB1 -281 -031 -002 -004
Peoples Republic of China -AA1
*Not shown # Primary heatsink uses items 4 and 5, alternate heatsink uses item 6.

Keyboard LEDs LED Num Lock Caps Lock Scroll Lock Num, Caps, Scroll Lock Num, Caps, Scroll Lock Num Lock Caps Lock Num, Caps, Scroll Lock Color Green Green Green Green Green Green Green Green LED Activity Flashing (Beeps - 1S, 2L) Flashing (Beeps - 1L, 2S) Flashing (Beeps - 2L, 1S) Flash On-Off 2 times (Beeps 1L, 3S) On (Rising Tone) On On Blink On in sequence, one at a time - N, C, SL State/Message Memory error No video System board failure, prior to video Invalid system ROM detected. ROM forces reflash. ROM reflashed successfully ROMPaq diskette not present, is bad, or drive not ready.* Enter password. Keyboard locked in network mode
* Insert valid ROMPaq diskette in drive A. Turn power switch off, then on to reflash ROM. If ROM flash is successful, all three keyboard LEDs will light up, and you will hear a rising tone series of beeps. Remove diskette and turn power off, then on to restart the computer. For more information about flashing the ROM, refer to the Troubleshooting guide. Type 1 (Primary) Heatsink System Board Connectors and Jumpers (position of some untitled components may vary in location) AGP1 BAT1 C_FAN1 CONN1 DDR1 DDR2 FDD1 F_P1 INTL_SPK1 JAUD1 JAUX1 JBAT1 JCD1 AGP slot Battery Heatsink fan Power, main DIMM 1 DIMM2 Diskette Power switch/LED Speaker, internal Front panel audio header CD audio - Drive #2 Clear CMOS CD audio - Drive #1 JFANG_SEL1 Fan speed control, ground # JFANV_SEL1 Fan speed control, voltage# JPWD1 JPW1 JTBL1 JUSB1 PCI1 PCI2 PCI3 PRIMAR1 SECON1 SFAN_1 U3 Password 3.3V_Aux Boot block Front USB PCI Expansion slot 1 PCI Expansion slot 2 PCI Expansion slot 3 Primary IDE Secondary IDE Chassis fan Processor socket
# Both jumpers must be set the same. Jumpers on pins 1 & 2 = system and CPU fan control set for variable speed operation depending on the load. Jumpers on pins 2 & 3 = system and CPU fan control set for full speed regardless of the load. System Hardware Interrupts IRQ System Function Timer Interrupt Keyboard Interrupt Controller Cascade Serial Port (COM B) Serial Port (COM A) Unused, available for PCI Diskette Drive Parallel Port (LPT 1) IRQ System Function Real-Time Clock Unused Unused, available for PCI Unused, available for PCI Mouse Coprocessor Primary ATA (IDE) Controller Secondary ATA (IDE) Controller Type 2 (Alternate) Heatsink

System Board Diagnostic Lights1 Main Power Switch Status OFF2 ON

3.3V_Aux LED ON ON

5V_Aux/PSON LED ON4 OFF

Power Button LED OFF ON

1. ON and OFF state of LEDs apply only to a good, working system board with AC power applied to the power supply. 2. Power LED on front of computer is OFF. 3. Power LED on front of computer is ON (Green). 4. 5V_Aux is ONN. 5. PSON is active = power supply turned ON.
Clearing CMOS* The computer's configuration (CMOS) may occasionally be corrupted. If it is, it is necessary to clear the CMOS memory using JBAT1 by performing the following procedure: 1. Prepare the computer for disassembly.
CAUTION: The power cord must be disconnected from the power source before changing the jumper setting. (NOTE: All LEDs on the board should be OFF). Failure to do so may damage the system board 2. Remove the access panel. 3. Remove the JBAT_1 jumper from pins 1 and 2 and place it on pins 2 and 3. Keep the jumper there for 5 seconds. 4. Replace the jumper on pins 1 and 2. 5. Replace the access panel. 6. Turn the computer on and run F10 Computer Setup (Setup utility) to reconfigure the system. * When the jumper is removed, both the power-on password and the setup password become invalid because both are stored in the configuration memory. You will need to reset the passwords. Disabling or Clearing the Power-On and Setup Passwords* 1. 2. 3. 4. 5. 6. 7. 8. Turn off the computer and any external devices, and disconnect the power cord from the power outlet. Remove the access panel. Locate the header and jumper labeled JPWD1. Remove the jumper from pins 1 and 2. Place the jumper over pin 2 only, in order to avoid losing it. Replace the access panel. Plug in the computer and turn on power. Allow the operating system to start. NOTE: Placing the jumper on pin 2 clears the current passwords and disables the password features. To re-enable the password features, repeat steps 1-3, then replace the jumper on pins 1 and 2. Repeat steps 5-6, then establish new passwords.
Product Configuration Codes* KYQZ LBJ5 LBJA LBZ7 KYXZ LBJ6 LBJB LBJ7 LBJQ LBJ8 LBJR LBJ9
Refer to the F10 Computer Setup (Setup utility) instructions to establish new passwords. * When the jumper is removed, both the power-on password and the setup password become invalid because both are stored in the configuration memory. You will need to reset the passwords.

Computer LEDs LED Power Power Power Power Power Power Power Power Power Hard Drive Color Green Green Green Green Clear Red Red Red Red Green LED Activity On 1 blink every 1 second 1 blink every 2 seconds 1 blink every 4 seconds Off State/Message (S0) Computer on (S1) Normal Suspend Mode (S3) Suspend to RAM (S4) Suspend to Disk (if applicable) (S5) Computer off

LBZC LC4A LC4S LG91

LBZD LC4B LC4T

LBZH LC4C LC4U

LBZK LC4D LC4V

LBZL LC4G LC4W

LBZM LC4H LC4X

LBZN LC4J LC4Y

LBZQ LC4K

LBZR LC4L

LBZS LC4R

LBZT LC4Q

*Serial number decoder: xxxxAAAAxxxx The center 4 characters are the Configuration Code
2 blinks 1 second apart, followed CPU thermal shutdown by 2-second pause - Repeat On 1 blink every 1 second 1 blink every 2 seconds Blinking CPU not installed ROM error Power supply crow bar Hard drive activity

Product environmental attributes - IT Eco Declaration 2004
Brand Manufacturer Manufacturers representative Contact person Postal address Postal code /City/ Country Telephone (incl. country code) Mobile phone (incl. country code) Fax (incl. country code) Internet site Additional information Logo Name: e-mail: Name: e-mail:
itecodeclaration.ww@hp.com
This declaration covers the below listed Information Technology product categories* with specified product identity (ID) such as type/model number.
Computer system unit CPU Display/ monitor Printer Copier Fax Mobile/portable computer Keyboard Multifunction product Scanner Server Digital Projector Camera
Other IT product, specify:
Black/white Colour Pages per minute: Product identity HP Pavilion dv6000 Notebook PC series & Compaq Presario V6000 Notebook PC series Issue date 01/10/2007 Guideline document June 2004 (Version of Guideline document used for completion of this declaration (month, year)) This IT Eco Declaration consists of three documents: Company environmental profile: Divided into two sections, legal and market requirements
Product environmental attributes: Divided into two sections, legal and market requirements Guideline document with extensive clarifications, comments and references. The latest version of all these documents can be downloaded from: www.itecodeclaration.org Notes: Voluntary vs compulsory requirements: Items marked V are voluntary to answer, all other items must be answered. The latest version of the Guideline document must be used. Specify in table above according to which version of the guideline document this declaration has been completed. This version of the IT Eco Declaration is adjusted to the document Product-related Environmental Attributes, issued by the European Association for Standardizing Information and Communication Systems (ECMA), TR/70, version 1999. This version of the IT Eco Declaration meets the basic principles of ISO14021:1999, Environmental labels and declarations Self-declared environmental claims (Type II environmental labelling). When references are given to standards like ISO, IEC and EN, the latest version should always be referred to. For telecommunication products, use eco declaration for telecommunication products. This IT Eco Declaration version can be used from October and shall be used for products announced after December 1 2003. The IT Eco Declaration is a system for declaration of environmental aspects of IT and telecom products, developed by the Nordic IT organisations, IT-Fretagen in Sweden, ITB in Denmark, IKT-Norge in Norway and TTK ry in Finland. This IT Eco Declaration may only be used after having signed a contract with at least one of these organisations.
Association of the Swedish IT and Telecom Industry www.itforetagen.se
Norwegian IT-companies Organisation www.ikt-norge.no
IT-Brancheforeningen Kontor & Data www.itb.dk
Finnish Association of Office Technology Traders www.ttkry.com

Version June 2004

Page 1 (5)
Copyright Association of the Swedish IT and Telecom Industry 2000. Reproduction of this form without permission is prohibited by the copyright law 1960:729. The prohibition includes any kind of reproduction, by electronic or any other means.
Product identity Issue date
HP Pavilion dv6000 Notebook PC series & Compaq Presario V6000 Notebook PC series

01/10/2007 Logo

Product environmental attributes - Legal requirements
Item P1 P1.1 P1.2 P1.3 P1.4 P1.5 Additional information regarding each item may be found under P14. Environmental conscious design Product parts are free from, i.e. less than 0.1% by weight (b.w.), CFCs & HCFCs, asbestos, PCB & PCT (3093/94/EEC, 76/769/EEC, 6th amendment, 99/77/EEC, 82/828/EEC) Components are free from, i.e. less than 0.1% b.w., mercury (Hg), except for small amounts of mercury which are allowed in light sources. (SE SFS 1998:944) Cadmium (Cd) content of colorants, stabilizers, and surface treatments does not exceed, 0.01% b.w., as specified in 76/769/EEC, 10th amendment, 1991/338/EEC. Paints are free from lead (Pb), i.e. less than 0.1% b.w., (76/769/EEC, 8th amendment, 89/677/EEC) Paints, coatings, plastics, rubbers and seals are free from flame retardants and/or plasticizers containing Short Chain Chlorinated Paraffines (SCCPs) with more than 0,1% by weight, 10-13 carbon atoms, minimum 48% chlorine by weight, CAS number 63449-39-8 (NO MVD regulation 1544, 2000.12.13 and FI 416/2003). If the product is intended for direct and prolonged skin contact, the surfaces do not release nickel (Ni) above levels specified in (76/769/EEC, 8th amendment, 94/27/EEC) Batteries If hazardous batteries are used in the product, they are labelled. (93/86/EEC). If batteries are used in the product they are free (<0.0005% by weight) from mercury (Hg) (98/101/EC) Electrical safety, EMC and connection to the telephone network The product meets the Low Voltage Directive (LVD) regarding electrical safety (73/23/EEC & 93/68/EEC) The product meets the EMC Directive regarding electromagnetic compatibility (89/336/EEC) If product is intended for connection to a public telecom network or contains a radio transmitter, it meets the EU R&TTE Directive (1999/5/EC) The product is CE-marked (93/68/EEC) Consumable materials If a photo conductor (drum, belt etc.) is used in the product, it is free (<0.01% by mass) from cadmium (Cd) (76/769/EEC and 91/338/EEC) If an ink is used in the product, it is free (<0.01% by mass) from cadmium (Cd) (91/338/EEC) If toner/ink (or corresponding) are used in the product, they are classified and if required labelled in accordance with EU directives Packaging materials The sum of the concentration levels of lead, cadmium, mercury, and hexavalent chromium present in packaging or packaging components does not exceed 0.01% by weight (100 ppm). (94/62/EC). The product packaging material is free from CFC/HCFC.

Requirement met Yes No n.a.
P1.6 P2 P2.1 P2.2 P3 P3.1 P3.2 P3.3 P3.4 P4 P4.1 P4.2 P4.3 P5 P5.1 P5.2
This product meets above listed legal requirements

Page 2 (5)

Product Identity Issue date
Product environmental attributes - Market requirements
Item P6 P6.1 P6.2 P6.3 P6.4 P6.5 V P6.6 P6.7 P6.8 P6.9 P6.10 V P6.11 P6.12 V P6.13 V = Voluntary to answer. Additional information regarding each item may be found under P14. Environmental conscious design Disassembly, recycling Gluing/welding of different material has been avoided. Plastic materials in covers/housing are free from surface coating. Mechanical plastic parts >100g, consist of one material or of easily separable materials. Plastic parts >25g, have material codes according to ISO 11469. Plastic parts are free from metal inlays or have inlays that can be removed with commonly available tools. If labels are required they should be separable. (This requirement does not apply to safety labels). Product lifetime Upgrading of the product can be done with commonly available tools Processor, memory and cards of various types can be changed/upgraded. Hard disk, CD/DVD drives and / or floppy drive can be changed/upgraded. Spare parts are available after end of production for: Material requirements Plastic parts >25g are free from PBB/PBDE, i.e less than 0.1% b.w. Plastic parts >25g are free from flame retardant substances/preparations above 0.1% classified as R45/46, R50/51/52/53 and R60/61 (67/548/EEC) Chemical specification of flame retardants in plastic parts >25g according to ISO 1043-4 declared below: Product cover/ housing: CM6140 C7230P Printed circuit boards: V P6.14 P6.15 P6.16 V P6.17 V P6.18 V P7 P7.1 P7.2 V P8 P8.1 Other plastic parts: Product cover/housing material type, specified according to ISO 1043-1 Material type ABS+PC Material type Electrical cable insulation material specification Light sources are free from mercury, i.e less than 0.1% b.w. If mercury is used specify: Number of lamps 1 & max. mercury per lamp >3 mg Mechanical plastic parts > 25g are free from lead (Pb), i.e. less than 0.1% b.w. Batteries Product is free from batteries defined as hazardous (91/157/EEC) Batteries are used that meet the European eco-label (EU Flower) criteria (2001/687/EC & 2001/686/EC) Energy consumption Material type PVC Other years
Product parts are free from beryllium (Be) and beryllium oxide (BeO), i.e. less than 0.1% b.w.
Note: For Monitors, PCs and Handheld PCs, energy consumption data are reported on Page 5 under Item P14, Additional Information.
n.a. V Maximum power Low power mode W W V Operation Off mode Deep sleep mode Sleep mode in 15 min min W W W n.a.
Sleep mode W If the product is in Stand by mode, it reverts to: Low power mode in V P8.2 P8.min

Deep sleep mode in min V Off mode in 2-sided printing/copying (duplex) from 1-sided originals is an integrated product function.

P8.4 P8.5 V P8.6 V V

Information about the energy save function is given in the user documentation. (Not applicable when no instruction is needed to operate the energy save function, i.e. the energy save function cannot be adjusted or inhibited by the user.) The product meets the requirements of ENERGY STAR. The product meets the requirements of GEEA. Display meets the energy save requirements of the European eco-label (EU Flower) (2001/686/EC & 2001/687/EC). Desktop or portable computer meets the energy save requirements of the European eco-label (EU Flower) (2001/686/EC & 2001/687/EC)

Page 3 (5)

Product environmental attributes - Market requirements (continued)
Item P9 P9.1 P9.2 V V = Voluntary to answer. Additional information regarding each item may be found under P14. Noise characteristics (Measured and declared according to ISO 7779 and ISO 9296) Declared A-Weighted Sound Power Level, LWAd (1B = 10 dB) Operating mode: LWAd : 4.0 B Idling mode: LWAd : 3.0 B The product meets the acoustic noise requirement of:
TCO Blue Angel European eco-label (EU Flower) Nordic Swan

P9.3 V

Declared A-Weighted Sound Pressure Level, LpAm (measured at the operator position if applicable; otherwise measured at the 1m bystander positions). Operating mode: LpAm: 29.4 dB Idling mode: LpAm: 21.0 dB Test position: LpAm: LpAm: Operator position Table top , other standard TVOC Bystander positions Floor standing , specify: Benzene TCO Blue Angel Nordic Swan Test position for PC tower Emissions

P10 P10.1

Chemical emission test performed according to RAL-UZ

P10.2 V

The test covers: Dust Ozone Styrene The product meets the requirement for chemical emission in:
Display/monitor/portable computer meets the requirement for low frequency electromagnetic fields in: MPR-II TCO prEN50279- A , -B , -C
P11 P11.1 P11.2 P11.3 V P11.4 V P12 P12.1 P12.2 P12.3 P13 P13.1
Consumable materials The photo conductor is free from selenium. If the photo conductor contains selenium there is a system for waste recovery. Safety Data Sheet/Material Safety Data Sheet (SDS/MSDS) is available for toner/ink (99/45/EC & 2001/58/EC) Paper containing recycled fibres and meeting requirements of ENV12281 can be used in the product. Ergonomics The computer system meets the ergonomic requirements of EN 29241-3, -7, -8 for CRT displays and EN-ISO 13406-2 for flat panel displays. The product keyboard meets the requirements of ISO 9995 and EN 29241-4. The computer input device meets the requirements of ISO 9241-9. Packaging and documentation Product packaging: material type(s): Corrugated carton weight (kg): Corrugated box Expanded PE Foam LDPE Bags Plastic packaging material is marked according to DIN 6120, ISO 11469 or ISO 1043, 1-4. Product plastic packaging is free from chlorine User and product documentation are free from chlorine bleached paper Additional information 0.453 0.341 0.102 0.326

P13.2 V P13.3 V P13.4 V P14

Page 4 (5)

P14 P8.1
Additional information Supplemental Energy Efficiency Data for Monitors, PCs and Handheld PCs Power Consumption Parameters AC Input Voltage at 100 AC Input Voltage at 115 VAC +/- 5 VAC, 50 Hz VAC +/- 5 VAC, 60 Hz +/- 3 Hz +/- 3 Hz Power Consumption for Displays: Enter power consumption in On / Active Power Operation Mode (W) Enter power consumption in First Low Power / Sleep Mode (W) Enter power consumption in Second Low Power / Deep Sleep Mode [If applicable] (W) Enter power consumption in Off or Apparent Off Mode (W) Power Consumption for Desktop and Mobile PCs: NA NA Enter power consumption in Maximum Power Mode (W) 18.2 18.2 Enter power consumption in On / Operation Mode (W) 1.1 1.0 Enter the power consumption in the ENERGY STAR Low Energy (Sleep) Mode (W) 0.3 0.2 Enter power consumption in Off or Apparent Off Mode (W) Power Consumption for Handheld PCs: Enter power consumption in On / Operation Mode (W) Enter power consumption in Off or Apparent Off Mode (W)
AC Input Voltage at 230 VAC +/- 5 VAC, 50 Hz +/- 3 Hz

NA 18.7 1.0

Page 5 (5)