6 Specifications A Screw Listing B Backup and Recovery in Windows XP C Backup and Recovery in Windows Vista D Display Component Recycling E Connector Pin Assignments F Power Cord Set Requirements Index

Product Description

The HP Pavilion dv2000 Notebook PC offers advanced modularity, Intel Core Duo, Core Solo, and Celeron processors or AMD Turion 64 Mobile Technology and Mobile AMD Sempron processors, and extensive multimedia support.

1.1 Features

The following processors are available, varying by computer model:
Intel Core Duo T7200 (2.00-GHz) Intel Core Duo T5600 (1.83-GHz) Intel Core Duo T5500 (1.66-GHz) Intel Core Duo T5200 (1.60-GHz) Intel Core Duo T2600 (2.16-GHz) Intel Core Duo T2500 (2.00-GHz) Intel Core Duo T2400 (1.83-GHz) Intel Core Duo T2250 (1.73-GHz) Intel Core Duo T2060 (1.60-GHz) Intel Core Duo T2300 (1.66-GHz) Intel Core Duo T2350 (1.60-GHz) Intel Core Duo T2050 (1.60-GHz) Intel Core Solo T1350 (1.80-GHz) Intel Celeron M 440 (1.86-GHz) Intel Celeron M 430 (1.73-GHz) AMD Turion Dual Core, TL-60 (2.0-GHz) AMD Turion 64, MK-36 (2.00-GHz) AMD Turion TL-56 (1.80-GHz) AMD Turion ML-52 1.60-Ghz AMD Turion ML-50 1.60-GHz Mobile AMD Sempron 3500+ (1.80-GHz) Mobile AMD Sempron 3400+ (1.80-GHz) Mobile AMD Sempron 3200+ (1.60-GHz)
14.1-inch WXGA (1280 768) TFT display with over 16.7 million colors, varying by computer model

160-, 120-, 100-, 80-, 60-, or 40-GB high-capacity hard drive, varying by computer model 256-MB DDR synchronous DRAM (SDRAM) at 667 MHz and 533 MHz, expandable to 2.0 GB Microsoft Windows XP Home Edition or Windows XP Professional, or Free DOS, varying by computer model Full-size Windows keyboard with embedded numeric keypad TouchPad pointing device with on/off button and dedicated two-way scroll zone Integrated 10/100 BASE-T Ethernet local area network (LAN) network interface card (NIC) with RJ-45 jack Integrated high-speed 56K modem with RJ-11 jack Integrated wireless support for Mini Card IEEE 802.11b and 802.11b/g WLAN device Support for one ExpressCard External 65-watt or 90-watt AC adapter with 3-wire power cord 6-cell or 12-cell Li-Ion battery Stereo speakers with volume up and down buttons Integrated Web camera (select models only) Integrated microphone (select models only) Support for the following optical drives:

The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is not already running, begin at step 1. If the Setup Utility is already running, begin at step 2. 1. To start the Setup Utility, turn on or restart the computer, and then press f10 while Press <F10> to enter setup is displayed in the lower-left corner of the screen. 2. Select Exit > Load Setup Defaults, and then press enter. 3. When the Setup Confirmation is displayed, press enter to save your preferences. 4. To set your preferences and exit the Setup Utility, press f10, and then follow the instructions on the screen. The Setup Utility default settings are set when you exit the Setup Utility and go into effect when the computer restarts.
This guide describes the Setup Utility features recommended for all users. For more information about the Setup Utility features recommended for advanced users only, refer to Help and Support, which is accessible only when the computer is in Windows. The Setup Utility features available for advanced users include a hard drive self-test, a Network Service Boot, and settings for boot order preferences.
The <F12> to boot from LAN message that is displayed in the lower-left corner of the screen each time the computer is started or restarted in Windows is the prompt for a Network Service Boot. The Press <ESC> to change boot order message that is displayed in the lower-left corner of the screen each time the computer is started or restarted in Windows is the prompt to change the boot order.

Table 2-5 Main Menu

Table 2-6 Security Menu
Table 2-7 System Configuration Menu
Select Language Support Enhanced SATA support (select models only) Boot Options To Do This Change the Setup Utility language. Enable/disable enhanced SATA mode. Set the following boot options: f10 and f12 Delay (sec.)Set the delay for the f10 and f12 functions of the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20). CD-ROM bootEnable/disable boot from CD-ROM. Floppy bootEnable/disable boot from Floppy. Internal Network Adapter bootEnable/disable boot from Internal Network Adapter. Boot OrderSet the boot order for: USB Floppy ATAPI CD/DVD ROM Drive Hard drive USB Diskette on Key USB Hard drive Network adapter

Button Sound (select models only) Video memory up to (select models only)
Enable/disable the Quick Launch Button tapping sound. Select the amount of video memory.
Table 2-8 Diagnostics Menu
Select Hard Disk Self Test To Do This Run a comprehensive self-test on the hard drive. two On models withcalledhard drives, this menu option is the Primary Hard Disk Self Test. Secondary Hard Disk Self Test (select models only) Run a comprehensive self-test on a secondary hard drive.
2.3 Troubleshooting Flowcharts
Table 2-9 Troubleshooting Flowcharts Overview
Flowchart 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 Description Flowchart 2.1Initial Troubleshooting Flowchart 2.2No Power, Part 1 Flowchart 2.3No Power, Part 2 Flowchart 2.4No Power, Part 3 Flowchart 2.5No Power, Part 4 Flowchart 2.6No Video, Part 1 Flowchart 2.7No Video, Part 2 Flowchart 2.8Nonfunctioning Docking Device (if applicable) Flowchart 2.9No Operating System (OS) Loading Flowchart 2.10No OS Loading, Hard Drive, Part 1
Table 2-9 Troubleshooting Flowcharts Overview (Continued)
Flowchart 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 2.20 Description Flowchart 2.11No OS Loading, Hard Drive, Part 2 Flowchart 2.12No OS Loading, Hard Drive, Part 3 Flowchart 2.13No OS Loading, Diskette Drive Flowchart 2.14No OS Loading, Optical Drive Flowchart 2.15No Audio, Part 1 Flowchart 2.16No Audio, Part 2 Flowchart 2.17Nonfunctioning Device Flowchart 2.18Nonfunctioning Keyboard Flowchart 2.19Nonfunctioning Pointing Device Flowchart 2.20No Network/Modem Connection
Flowchart 2.1Initial Troubleshooting

Begin troubleshooting.

Go to Is there power?
Flowchart 2.2No Power, Part 1.
Beeps, LEDs, or error messages? Check LED board, speaker connections. All drives working?
Flowchart 2.17Nonfunctioning Device.
Go to Is there video? (no boot)
Flowchart 2.6No Video, Part 1.
Keyboard/ pointing device working? Go to
Flowchart 2.18Nonfunctioning Keyboard or Flowchart 2.19Nonfunctioning Pointing Device.

Go to Is the OS loading?

Flowchart 2.9No Operating System (OS) Loading.
Connecting to network or modem?
Flowchart 2.20No Network/Modem Connection.

Go to Is there sound?

Flowchart 2.15No Audio, Part 1.
Flowchart 2.2No Power, Part 1
No power (power LED is off).
Remove from docking device (if applicable).
Power up on battery power? Reset power.* Power up on battery power?
Flowchart 2.3No Power, Part 2.
Power up on AC power? Reset power.*
Power up on AC power? Go to
Flowchart 2.4No Power, Part 3.
Power up in docking device? Done
1. Reseat the power cables in the docking device and at the AC outlet. 2. Ensure the AC power source is active. 3. Ensure that the power strip is working.

Computer Major Components
32 Maintenance and Service Guide
Table 3-1 Spare Parts: Computer Major Components

Description

14.0-inch, WXGA display assembly (includes wireless antenna transceivers and cables) 14.0-inch, WXGA display assembly (includes Web cam and microphone) 14.0-inch, WXGA display assembly (includes microphone)

Spare Part Number

417048-001 435853-001 435854-001
Section Refer toassembly3.3, Display Assembly Components, for display internal component spare part number information. 2 Switch covers (include wireless button and light) For use with full-featured computer models For use with defeatured computer models Power button board (includes power button board cable) Keyboards For use only with computer models using Intel processors: Belgium European Greece Israel Japan Korea Latin America Nordic 441317-A41 441317-021 441317-DJ1 441317-BB1 441317-291 441317-AD1 441317-161 441317-DH1 Portugal Russia Saudi Arabia Switzerland Taiwan Thailand Turkey 441317-131 441317-251 441317-171 441317-111 441317-AB1 441317-281 441317-141 417079-001 417080-001 417084-001
Table 3-1 Spare Parts: Computer Major Components (Continued)
Keyboards (Continued) For use with all computer models: Brazil Denmark France French Canada Germany International Italy 441317-201 441317-081 441317-051 441317-121 441317-041 441317-B31 441317-061 Norway Spain Sweden/Finland The United Kingdom The United States
441317-091 441317-071 441317-101 441317-031 441317-001
Top cover rear strips For use with full-featured computer models For use with defeatured computer models 430466-001 417088-001
Top covers (include TouchPad) For use with full-featured computer models For use with defeatured computer models 430467-001 417090-001 430464-001 417082-001 417073-001
TouchPad TouchPad bracket TouchPad cable (not illustrated) Plastics Kit

8a 8b 8c 8d

Includes: ExpressCard slot bezel Hard drive cover (includes 2 captive screws, secured by C-clips) Memory module compartment cover (includes 2 captive screws, secured by C-clips) Mini Card compartment cover (includes 1 captive screws, secured by a C-clip)

Spare Part Number 407939-001 407940-001 407941-001 408483-001 408485-001 409407-001 Description Composite S-Video and audio input cable RF input adapter cable Analog TV tuner USB infrared receiver RF cable 802.11b/g WLAN Mini Card module for use only with computer models using Intel processors in the MOW1 countries or regions listed below: Antigua & Barbuda Argentina Australia Bahamas Barbados Brunei Canada Chile Dominican Republic Guam Guatemala Hong Kong Panama India Indonesia Malaysia Mexico New Zealand
Spare Part Number 409407-002 Description 802.11b/g WLAN Mini Card module for use only with computer models using Intel processors in the MOW2 countries or regions listed below: Aruba Austria Azerbaijan Bahrain Belgium Bermuda Bulgaria Cayman Islands Columbia Croatia Cyprus The Czech Republic Denmark 409497-001 Egypt El Salvador Estonia Finland France Georgia Germany Greece Hungary Iceland Ireland Italy Latvia Lebanon The Philippines Poland Portugal Romania Russia Serbia and Montenegro Singapore Slovakia Liechtenstein Lithuania Luxembourg Malta Monaco
802.11a/b/g WLAN Mini Card module for use only with computer models using Intel processors in the ROW countries or regions listed below: China Ecuador Haiti Honduras Pakistan Peru Qatar South Korea
409515-001 409843-001 410935-001 412175-001 412176-001
HP 90-W AC adapter, for use with dv2200 models HP 65-W AC Adapter Display label kit, for use with dv2200 models DVB-T TV tuner DVB-T TV tuner antenna
Spare Part Number 416376-001 Description 802.11b/g HS WLAN Mini Card module for use only with computer models using AMD processors in the United States and Canada 802.11b/g HS WLAN Mini Card module for use only with computer models using AMD processors in the ROW countries or regions listed below: China Ecuador Haiti 416377-001 Honduras Pakistan Peru Qatar South Korea

416376-002

802.11a/b/g LJ WLAN Mini Card module for use only with computer models using AMD processors in the United States and Canada 802.11a/b/g LJ WLAN Mini Card module for use with computer models using AMD processors in the ROW countries or regions listed below: China Ecuador Haiti Honduras Pakistan Peru Qatar South Korea

416377-002

417035-001 417036-001 417037-001 417041-001 417042-001
PM/G72M-V system board for use only with full-featured computer models using Intel processors GM system board for use only with full-featured computer models using Intel processors GMZ system board for use only with defeatured computer models using Intel processors Intel Core Duo T2300 (1.66-GHz) processor (includes thermal pad) Intel Core Duo T2400 (1.83-GHz) processor (includes thermal pad)

Removing the Microphones

33. If it is necessary to replace the Web camera cable, release the retention tabs 1 built in to the display enclosure lining that secure the Web camera cable to the display enclosure. 34. Remove the Web camera cable 2 from the display enclosure.
Removing the Web Camera Cable
Reverse the above procedure to reassemble and install the display assembly

Top Cover

Top Cover Spare Part Number Information

430467-001 417090-001

1. Prepare the computer for disassembly (Section 5.3) and remove the following components:
Hard drive (Section 5.4) Mini Card compartment cover (Section 5.8) Optical drive (Section 5.9) Keyboard (Section 5.10) Switch cover (Section 5.11) Display assembly (Section 5.12)
2. Remove the six Phillips PM2.59.0 screws 1 and the Phillips PM2.57.0 screw 2 that secure the top cover to the computer.
Removing the Top Cover Screws, Part 1
3. Remove the two Phillips PM2.03.0 screws 1 and the four Phillips PM2.04.0 screws 2 that secure the top cover to the computer.
Removing the Top Cover Screws, Part 2
4. Turn the computer right-side up with the front toward you. 5. Release the ZIF connector 1 to which the TouchPad cable is connected and disconnect the cable 2 from the system board.
Disconnecting the TouchPad Cable
6. Remove the four Phillips PM2.54.0 screws 1 and the Phillips PM2.59.0 screw 2 that secure the top cover to the computer.
Removing the Top Cover Screws, Part 3
7. Lift up the front edge of the top cover and remove it.

Removing the Top Cover

Reverse the above procedure to install the top cover.
Maintenance and Service Guide 549

TouchPad

TouchPad Spare Part Number Information
TouchPad (includes TouchPad bracket and Touchpad cable) TouchPad cable

430464-010 417082-001

Hard drive (Section 5.4) Mini Card compartment cover (Section 5.8) Optical drive (Section 5.9) Keyboard (Section 5.10) Switch cover (Section 5.11) Display assembly (Section 5.12) Top cover (Section 5.13
2. Release the ZIF connector 1 to which the TouchPad cable is connected and disconnect the cable 2 from the TouchPad board.

Removing the Fan/Heat Sink Assembly
5. Turn the system board right-side up with the front toward you. 6. Remove the ExpressCard assembly from the system board.
Removing the ExpressCard Assembly
Reverse the above procedure to install the ExpressCard assembly.
5.25 Fan/Heat Sink Assembly
Fan/Heat Sink Assembly Spare Part Number Information
For use with computer models using Intel processors: For use on UMA system boards For use on discrete system boards For use with computer models using AMD processors 430463-001 417081-001 431851-001
2. Turn the computer upside down with the front toward you.
3. Disconnect the fan cable from the system board.
Disconnecting the Fan Cable
4 and 5 apply Stepsprocessors. only to computer models using Intel 4. Loosen the four Phillips PM2.013.0 screws 1 and the Phillips PM2.09.0 screw 2 that secure the fan/heat sink assembly to the system board. 5. Remove the fan/heat sink assembly 3 from the system board.
Removing Fan/Heat Sink Assembly
and 7 apply Steps 6processors. only to computer models using AMD 6. Loosen the Phillips PM2.09.0 screw 1 and the four Phillips PM2.013.0 screws 2 that secure the fan/heat sink assembly to the system board. 7. Remove the fan/heat sink assembly 3 from the system board.
The following note applies only to computer models using Intel processors:
The thermal pads should be thoroughly cleaned from the surfaces of the fan/heat sink assembly 1 and 3, video memory chip 2, and processor 4 each time the fan/heat sink assembly is removed. Thermal pads should be installed on all surfaces before the fan/heat sink assembly is reinstalled. Thermal pads are included with all fan/heat sink assembly, system board, and processor spare part kits.
Replacing the Thernal Pads
The following note applies only to computer models using AMD processors:
The thermal pads should be thoroughly cleaned from the surfaces of the fan/heat sink assembly 1 and 2, video memory chip 3, and processor 4 each time the fan/heat sink assembly is removed. Thermal pads should be installed on all surfaces before the fan/heat sink assembly is reinstalled. Thermal pads are included with all fan/heat sink assembly, system board, and processor spare part kits.
The fan/heat sink assembly mounting bracket should be replaced as shown in the following illustration when installing the fan/heat sink assembly. The fan/heat sink assembly mounting bracket is available using spare part number 417114-001.
Removing the Fan/Heat Sink Assembly Mounting Bracket
Reverse the above procedure to install the fan/heat sink assembly.

Where used: 2 screws that secure the fan/heat sink assembly to the system board (documented in Section 5.25)
Phillips PM2.08.0 Screw Locations
Table A-12 Phillips PM2.013.0 Spring-Loaded Shoulder Screw

Head Width 6.0 mm

Qty. 8

Length 13.0 mm

Where used: 4 screws that secure the fan/heat sink assembly to the system board on computer models using Intel processors (documented in Section 5.25)
Phillips PM2.013.0 Spring-Loaded Shoulder Screw Locations

(Continued)

Where used: 4 screws that secure the fan/heat sink assembly to the system board on computer models using AMD processors (documented in Section 5.25)
Table A-13 Phillips PM2.09.0 Spring-Loaded Shoulder Screw
Where used: One screw that secures the fan/heat sink assembly to the system board on computer models using Intel processors (documented in Section 5.25)
Phillips PM2.09.0 Spring-Loaded Shoulder Screw Location
Where used: One screw that secures the fan/heat sink assembly to the system board on computer models using AMD processors (documented in Section 5.25)
Backup and Recovery in Windows XP
Recovering System Information
Tools provided by the operating system and PC Recovery software are designed to help you with the following tasks for safeguarding your information and restoring it in case of a system failure:
Backing up your information regularly to protect your important system files. Making a set of recovery discs (PC Recovery software feature). Recovery discs are used to start up (boot) your computer and restore the operating system and software programs to factory settings in case of system failure or instability. Creating system restore points (operating system feature). System restore points allow you to reverse undesirable changes to your computer by restoring the computer to an earlier state. Recovering a program or driver (PC Recovery software feature). This feature helps you reinstall a program or driver without performing a full system recovery. Performing a full system recovery (PC Recovery software feature). With PC Recovery, you can recover your full factory image if you experience system failure or instability. PC Recovery works from a dedicated recovery partition on the hard drive or from recovery discs you create.

You will need high quality CD-R, DVD-R, or DVD+R media (purchased separately).
and double-layer DVDRW are DVDRW/RRecovery Disc Creator software. not compatible with the PC
The computer must be connected to AC power during this process. Only one set of recovery discs can be created per computer.
Number each disc before inserting it into the computer optical drive. If necessary, you can exit the program before you have finished creating the recovery discs. The next time you open PC Recovery Disc Creator, you will be prompted to continue the disc creation process.
To create a set of recovery discs: 1. Select Start > All Programs > System Recovery > PC Recovery Disc Creator. The PC Recovery Disc Creator tool opens. 2. Click Next. will If you are operating the computer on battery power,goyou the be prompted to connect to AC power before you can to next step. 3. Select the type of disc you want to use and click Next. the and displays the The software examinescreateimage recovery discs. number of blank discs needed to your 4. Insert the first disc and follow the on-screen instructions to complete the creation of the recovery discs.
Reinstalling Software Programs and Drivers
If a program or driver preinstalled at the factory is accidentally erased or is damaged, the Application and Driver Recovery tool allows you to reinstall it. not this computer be reinstalled Softwaredisc provided withthe manufacturermustdownloaded from the provided by or from the manufacturer's Web site.
Before reinstalling the program, be sure it is fully uninstalled.
The Application and Driver Recovery tool replaces corrupted system files and reinstalls deleted system files within the program.
In most cases, if the program you are reinstalling is still on your computer, the reinstallation process does not affect your personal settings. In all cases, if a program has been deleted from your computer, the reinstallation process reinstalls the program or utility to the factory image but cannot restore your personal settings.
Reinstalling Preinstalled Programs and Drivers
1. Remove the program or driver: listed in Add or In some cases,Ifdrivers are notnot listed,thedoes notRemove be Programs list. the driver is it need to removed. a. Select Start > Control Panel > Add or Remove Programs. b. Click the program or driver you want to remove, and then click Change/Remove.

To delete the recovery partition: 1. If you have not already created recovery discs, create them now. 2. Select Start > All Programs > System Recovery > PC Recovery. The PC Recovery tool opens. 3. Select PC Recovery and click Next. The computer restarts and the PC Recovery tools opens.
4. Click OK. 5. At the System Recovery screen, click Advanced Options. 6. Select Delete Recovery Partition (not recommended) and follow the on-screen instructions.
Updating Reinstalled Software
After you perform a system recovery, connect to the Internet to update all reinstalled software. To access update links for the operating system and other software provided on your computer:
Select Start > Help and Support.
To update optional software, follow the instructions provided by the software manufacturer. Some programs include an update feature you can access from a Help button or menu within the program.
Backup and Recovery in Windows Vista
Tools provided by the operating system and Recovery Manager software are designed to help you with the following tasks for safeguarding your information and restoring it in case of a system failure:
Back up your information regularly to protect your important system files. Make a set of recovery discs (Recovery Manager software feature). Recovery discs are used to start up (boot) your computer and restore the operating system and software programs to factory settings in case of system failure or instability. Create system restore points (operating system feature). System restore points allow you to reverse undesirable changes to your computer by restoring the computer to an earlier state. Recover a program or driver (Recovery Manager software feature). This feature helps you reinstall a program or driver without performing a full system recovery. Perform a full system recovery (Recovery Manager software feature). With Recovery Manager, you can recover your full factory image if you experience system failure or instability. Recovery Manager works from a dedicated recovery partition on the hard drive or from recovery discs you create.
On a regularly scheduled basis.
Before the computer is repaired or restored. Before you add or modify hardware or software.
Create system restore points using the Windows System Restore feature. Store personal files in the Documents folder and back up these folders periodically. Back up templates stored in their associated programs. Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings. The screen shot can be a time saver if you have to reset your preferences. To copy the screen and paste it into a word-processing document: a. Display the screen. b. Copy the screen: To copy only the active window, press alt+fn+prt sc. To copy the entire screen, press fn+prt sc. c. Open a word-processing document, and then select Edit > Paste.

1394 port 110 battery removal 56 spare part numbers 313, 334, 339, 341, 56 battery bay 119 battery light 16 battery release latch 119 Bluetooth module removal 560 spare part number 311, 329, 560 Bluetooth module cable, illustrated 325 bottom components 119
AC adapter, spare part numbers 326, 331 analog TV tuner, spare part number 326, 330 arrow keys 112 audio troubleshooting 231 audio/infrared board removal 558 spare part number 37, 334, 558 audio-in (microphone) jack location 17 pin assignments D6 audio-out (headphone) jack location 17 pin assignments D6
Cable Kit contents 325 spare part number 325, 334 cables, service considerations 42 caps lock key 112 caps lock light 114 carrying case, spare part number 327, 335 CMOS clearing 14
backpack, spare part number 326, 329 Backup and Recovery Windows Vista C1 Windows XP B1 backup suggestions B2, C2 base enclosure, spare part numbers 311, 335, 336

Index1

components bottom 119 front 16 keyboard 111 left-side 19 right-side 18 top 113, 115, 117 TouchPad 118 composite S-Video and audio input cable, spare part number 326, 330 computer feet, locations 513 Computer Setup Advanced Menu 28, 215 File Menu 26, 213 Security Menu 27, 213 Tools Menu 27, 214 computer specifications 61 connector pin assignments external monitor D4 headphone D6 microphone D6 monitor D4 RJ-11 (modem) D5 RJ-45 (network) D2 S-Video-out D3 Universal Serial Bus (USB) D1 connectors, service considerations 42 creating, recovery discs Windows Vista C4 Windows XP B4 system restore point Windows Vista C3 Windows XP B3

Index2

deleting recovery partition Windows Vista C8 Windows XP B9 design overview 121 Digital Media Slot 110 Digital Media Slot light 110 disassembly sequence chart 53 diskette drive, OS loading problems 229 display assembly removal 532 spare part number 33, 333, 337, 532 specifications 63 display bezel removal 536 spare part numbers 536 Display Cable Kit, spare part number 335, 543 Display Hinge Kit, spare part numbers 335, 336, 540 display hinge, removal 540 Display Label Kit, spare part number 335 display label kit, spare part number 331 display lid switch module removal 566 spare part number 334, 566 display panel removal 541 spare part numbers 336, 541
Display Plastics Kit, spare part numbers 335, 336 Display Screw Kit, spare part number 335 docking device spare part number 326, 335 troubleshooting 224 drive light 16 drives, preventing damage 43 DVB-T TV tuner antenna, spare part number 326, 331 DVB-T TV tuner, spare part number 326, 331 DVD button 116 DVD/CD-RW Combo Drive OS loading problems 230 precautions 43 removal 522 spare part number 319, 323, 333, 522 specifications 66 DVDRW and CD-RW Combo Drive, OS loading problems 230 DVDRW/R and CD-RW Combo Drive precautions 43 removal 522 spare part numbers 319, 323, 333, 522 specifications 68, 69

electrostatic discharge 44, 48 expansion hub, spare part number 326, 335 expansion port ExpressCard assembly removal 575 spare part number 37, 335, 575 ExpressCard slot 110 ExpressCard slot bezel, illustrated 324 external monitor port location 110 pin assignments D4

f1 to f12 keys 112

fan/heat sink assembly removal 578 spare part numbers 311, 334, 336, 337, 578 fan/heat sink assembly mounting bracket installing 584, 585 spare part number 311, 335, 584 features 12 feet, locations 513 flowcharts, troubleshooting no audio 231, 232 no network/modem connection 236 no OS loading 225

Index3

no OS loading from diskette drive 229 no OS loading from hard drive 226, 227, 228 no OS loading from optical drive 230 no power 218, 220, 221 no video 222, 223 nonfunctioning device 233 nonfunctioning docking device 224 nonfunctioning keyboard 234 nonfunctioning pointing device 235 fn key 112 front components 16
headphone jack location 17 pin assignments D6 headset, spare part number 326, 329 HP Remote Control, spare part number 326
I/O address specifications 613 infrared port 17 infrared receiver, spare part numbers 326, 338 interrupt specifications 611 inverter removal 539 spare part number 335, 539
grounding equipment and methods 47
keyboard removal 524 spare part numbers 33, 35, 339, 340, 341, 524 troubleshooting 234 keyboard components 111 keypad keys 112
hard drive OS loading problems 226 precautions 43 removal 58 spare part numbers 313, 323, 333, 336, 341, 58 specifications 64 hard drive bay 119 hard drive cover illustrated 324 removal 59
LED board cable illustrated 325 removal 531 left-side components 19

Index4

mass storage devices, spare part numbers 322 Media button 116 memory module removal 514 spare part numbers 313, 333, 514 memory module compartment 120 memory module compartment cover illustrated 324 removal 515 microphone location 114 removal 543 microphone jack location 17 pin assignments D6 Mini Card compartment 120 Mini Card compartment cover illustrated 324 removal 520 Mini Card module removal 517 spare part numbers 315, 317, 319, 330, 331, 332, 335, 339, 517 modem connector, removal 574 modem jack location 18 pin assignments D5
modem module removal 556 spare part numbers 37, 334, 337, 556 modem, troubleshooting 236 monitor port location 110 pin assignments D4 mouse, spare part number 326, 336, 337

network jack location 110 pin assignments D2 network, troubleshooting 236 Next/Fast Forward button 117 nonfunctioning device, troubleshooting 224, 233 num lock key 112 num lock light 114
optical drive location 18, 119 OS loading problems 230 precautions 43 removal 522 spare part numbers 319, 323, 522 specifications 68, 69
packing precautions 45 password clearing 14

Index5

performing a recovery Windows Vista C7 Windows XP B7 plastic parts 42 Plastics Kit contents 324 spare part number 35, 324, 334 Play/Pause button 117 pointing device, troubleshooting 235 power button 114 power button board removal 531 spare part number 33, 334, 531 power connector 18 power connector cable removal 573 spare part numbers 311, 336, 573 power cord set requirements E2 spare part numbers 328, 329 power light 16 power management features 15 power, troubleshooting 218 Previous/Rewind button 117 processor removal 586 spare part numbers 39, 332, 333, 335, 336, 337, 339, 341, 586
recovering from partition on hard drive Windows Vista C7 Windows XP B8 recovering from the recovery discs Windows Vista C7 Windows XP B8 remote control, spare part number 329 remote control, spare part numbers 326, 327, 337, 338 removal preliminaries 41 procedures 51 replacement preliminaries 41 procedures 51 RF cable, spare part number 326, 330 RF input adapter cable, spare part number 326, 330 right-side components 18 RJ-11 (modem) jack location 18 pin assignments D5 RJ-45 (network) jack location 110 pin assignments D2

Index6

RTC battery removal 512 spare part number 313, 334, 512 Rubber Feet Kit, spare part number 311, 335
Screw Kit, spare part number 327, 335 screw listing A1 security cable slot 110 serial number 31, 52 service considerations 42 Setup Utility 21 speaker assembly removal 564 spare part number 37, 334, 564 speakers 114 specifications computer 61 display 63 DVD/CD-RW Combo Drive 66 DVDRW/R and CD-RW Combo Drive 68, 69 hard drive 64 I/O addresses 613 interrupts 611 optical drive 68, 69 system DMA 610 static shielding materials 48 Stop button 117
S-Video-out jack location 110 pin assignments D3 switch cover removal 528 spare part numbers 33, 334, 528 system board removal 570 spare part numbers 37, 332, 336, 339, 570 system DMA 610
tools required 41 top components 113, 115, 117 top cover removal 545 spare part numbers 35, 334, 336, 545 top cover rear strip removal 568 spare part numbers 35, 334, 336, 568 TouchPad 118 removal 550 spare part number 35, 336, 550 TouchPad buttons 118 TouchPad cable illustrated 325 removal 551 spare part number 35, 334, 550

HP-00007-01, Appendix 3

09-April-2006

Appendix 3 Product End-of-Life Disassembly instructions Product Identification: Marketing Name / Model HP Pavilion dv2000 Series Notebook PC Description Notebook PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment. 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Item Description Notes Quantity of items included in product. Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) Batteries With a surface greater than 10 square cm All types including standard alkaline and lithium coin or button style batteries For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Includes background illuminated displays with gas discharge lamps 3 2
Mercury containing components
Liquid Crystal Displays (LCD) with a surface greater than 100 square cm Cathode Ray Tubes (CRT) Capacitors / condensers (Containing PCB / PCT) Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height External electrical cables and cords Gas Discharge Lamps Plastics containing Brominated Flame Retardants Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Components and waste containing asbestos Components, parts and materials

Adapter Power Cord

Declaration limited to case plastics only. Include the cartridges, print heads, tubes, vent chambers, and service stations.

HP Restricted Page 1

containing refractory ceramic fibers Components, parts and materials containing radioactive substances 0
Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Screwdriver Screwdriver Tool Size (if applicable) Type-Phillip #1 Type-Phillip #0
Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: Vega PA Remove 6 cell battery. Replace one M2.5*6L screw on ODD bracket, then Remove ODD module. Replace two M2*4.2L screws on HDD door and two M2.5*3L screws on HDD bracket, then Remove HDD module. Replace three M2.5*6L screws behind the keyboard. Replace four M2.5*8L and one M2.5*4L screws behind middle cover assy. Replace M2.0*4.2L screw on Mini PCI door, then remove wireless card. Reverse the system, then Remove keyboard and middle cover assy. Separate the cables from connectors. Remove two M2.5*4L and two M2.5*6L screws on LCD R/L hinges, then remove LCD assy. Disassemble LCD assy and remove mercury bulb for selective treatment Remove six M2.5*8Ltwo M2.0*3L and three M2.0*4L on lower case, then reverse it. Remove four M2.5*3L and one M2.5*10L on upper case. Remove upper case assy. Remove two M2.5*4L screws on Audio board and two M2.0*3L screws on wireless board. Remove Audio board and wireless board. Remove M2.5*3L screw on R/L speaker, then separate the cables from connector. Remove M2.5*4L on IO/L and MB, then Remove MB assy. Remove coin cell battery from MB assy for selective treatment

HP Restricted Page 2

OPTIONAL: Depending upon the complexity of the disassembly process, a graphic depicting the locations of items contained within the product which require selective treatment (with descriptions and arrows identifying locations) can be inserted below:

HP Restricted Page 3