Send and receive wireless signals to communicate with wireless local area networks (WLANs).
*The antennas are not visible from the outside of the device. For optimal transmission, keep the areas immediately around the antennas free from obstructions.
To see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental Notices that applies to your country or region.
Illustrated parts catalog

Service tag

When ordering parts or requesting information, provide the computer serial number and model description provided on the service tag: (1) Product name: This is the product name affixed to the front of the device. (2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product. (3) Part number/Product number (p/n): This number provides specific information about the product's hardware components. The part number helps a service technician to determine what components and parts are needed. (4) Model description: This is the alphanumeric identifier used to locate documents, drivers, and support for the device. (5) Warranty period: This number describes the duration of the warranty period for the device.
Chapter 3 Illustrated parts catalog

Device major components

Item (1)
Description Display assembly (includes 1 webcam, 1 microphone, 1 speaker box, and 2 WLAN antenna transceivers/cables; WWAN is optional) See Display assembly components on page 21 for a comprehensive list of display assembly spare parts. For use with HP models only 10.1-inch, high-definition, AntiGlare Display Assembly (Includes WWAN) 10.1-inch, high-definition, AntiGlare Display Assembly

Spare part number

572407-001 572406-001
Description 10.1-inch, standard-definition, AntiGlare Display Assembly (includes WWAN) 10.1-inch, standard-definition, AntiGlare Display Assembly
Spare part number 571414-001 537646-001
For use with Compaq models only (2) 10.1-inch, high-definition, AntiGlare Display Assembly 10.1-inch, standard-definition, AntiGlare Display Assembly (includes WWAN) 10.1-inch, standard-definition, AntiGlare Display Assembly 572414-001 571417-001 537643-001
Keyboard For use only on models with Windows operating system installed For use only in Brazil For use only in the Czech Republic For use only in Europe For use only in France For use only in French Canada For use only in Finland, Norway, and Sweden For use only in Germany For use only in Greece For use only in Hungary For use on international models For use only in Israel For use only in Italy For use only in Japan For use only in Latin America For use only in Portugal For use only in Russia For use only in Saudi Arabia For use only South Korea For use only in Spain For use only in Switzerland For use only in Taiwan For use only in Thailand For use only in Turkey For use only in the United Kingdom For use only in the United States 535689-201 535689-221 535689-A41 535689-051 535689-121 535689-DH1 535689-041 535689-151 535689-211 535689-B31 535689-BB1 535689-061 535689-291 535689-161 535689-131 535689-251 535689-171 535689-AD1 535689-071 535689-111 535689-AB1 535689-281 535689-141 535689-031 535689-001

Spare part number 504593-004
WWAN module NOTE: Not available for computers with Mobile Mi installed. HP un2400 Mobile Broadband Module (select models only) HP un2400 Mobile Broadband Module for use only with Verizon Wireless (select models only) WWAN module for use only in China 483377-002 483377-003 571888-001 537616-001

(12) (13)

RTC battery System board (includes processor and replacement thermal material) Includes Intel Atom N280 1.66-GHz processor, 512-KB Level 2 cache, 533-MHz front-side bus (FSB) Includes Intel Atom N270 1.6-GHz processor, 512-KB Level 2 cache, 533-MHz front-side bus (FSB)

571370-001 537662-001

Memory module (PC2-5300, 533-MHz, DDR2) 512-MB (for use in HP Mini 110 and Compaq Mini 110 models only) 1024-MB 2048-MB (for use in HP Mini 1101 NoteBook PC, and HP Mini 110 with Mobile Mi installed only) 537663-001 537664-001 537665-001 537611-001

(15) (16)

Base enclosure (includes 4 rubber feet) Battery 6-cell lithium-polymer (Li-Pol) battery (2.55-Ah, 55-Wh) 3-cell lithium-polymer (Li-Pol) battery (2.55-Ah, 28-Wh)

537627-001 537626-001

Display assembly components

Item (1) (2)

Description Hinge covers Display bezel For use with HP Mini 1101 NoteBook PC, and HP Mini 110 only For use with Compaq Mini 110 only
Spare part number 537617-001
537650-001 537644-001 537658-001
Display Hinge Kit (Includes left and right display panel hinges)
Speaker assembly (includes left and right cables) Display panel 10.1-inch high-definition AntiGlare 10.1-inch standard-definition AntiGlare

537621-001

572405-001 537656-001 537660-001 537657-001
Webcam module Display Cable Kit (Not illustrated, includes microphone assembly display cable, webcam cable, and WLAN antennas)

(7a) (7b)

Display panel cable WLAN antennas

Item (7c) (8) (9)

Description Microphone assembly WWAN antennas (not available on computers with Mobile Mi installed.) Display enclosure (includes logo) For use with the HP Mini 1101 Notebook PC, and HP Mini 110 For use with the Compaq Mini 110 Display Screw Kit (not illustrated)

537655-001

537651-001 537645-001 538510-001

Mass storage devices

Each hard drive spare part kit and solid-state drive spare part kit includes a cable and bracket.
Description Hard drive (select models only) 250-GB, 5400-RPM 160-GB, 5400-RPM Hard Drive Hardware Kit (not illustrated) 537635-001 537634-001 537641-001 Spare part number
Solid-state drive 64-GB 32-GB 16-GB 8-GB Solidstate Drive Hardware Kit (not illustrated) 537640-001 537639-001 537638-001 537637-001 537642-001

Spare part number 537613-001 537614-001 537615-001 537616-001 537617-001 537618-001 537619-001 537620-001 537621-001 537622-001 537626-001 537627-001 537634-001 537635-001 537637-001 537638-001 537639-001 537640-001 537641-001 537642-001 537643-001 537644-001 537645-001 537646-001 537650-001 537651-001 537655-001 537656-001 537657-001 537658-001 537660-001 537662-001
Fan USB/audio board (includes cable) Power/battery pass-through board RTC battery Display assembly hinge covers Rubber Kit (contains 4 device feet) Heat sink assembly (includes replacement thermal material) Screw Kit Speaker assembly (includes left and right cables) Top cover (includes TouchPad) 3-cell lithium-polymer (Li-Pol) battery (2.55-Ah, 28-Wh) 6-cell lithium-polymer (Li-Pol) battery (2.55-Ah, 55-Wh) 160-GB hard drive, 5400-RPM 250-GB hard drive, 5400-RPM 8-GB solid-state drive 16-GB solid-state drive 32-GB solid-state drive 64-GB solid-state drive Hard Drive Hardware Kit Solid-state Drive Hardware Kit 10.1-inch, standard-definition, AntiGlare Display Assembly for use with Compaq standard models only Display bezel for use with Compaq Mini 110 only Display enclosure (includes logo) for use with the Compaq Mini 110 10.1-inch, standard-definition, AntiGlare Display Assembly for use with HP models only Display bezel for use with HP Mini 1101 NoteBook PC, and HP Mini 110 only Display enclosure (includes logo) for use with the HP Mini 1101 Notebook PC, and HP Mini 110 WWAN antennas 10.1-inch standard-definition AntiGlare display panel Display Cable Kit (includes microphone assembly display cable, webcam cable, and WLAN antennas) Display Hinge Kit (Includes left and right display panel hinges) Webcam module System board (Includes Intel Atom N270 1.6-GHz processor, 512-KB Level 2 cache, 533-MHz front-side bus (FSB), and replacement thermal material)
Spare part number 537663-001 537664-001 537665-001 538510-001 571370-001 571414-001 571417-001 571888-001 572405-001 572406-001 572407-001 572414-001 574670-001
512-MB memory module (PC2-5300, 533-MHz, DDR2 for use in HP Mini 110 and Compaq Mini 110 models only) 1024-MB memory module (PC2-5300, 533-MHz, DDR2 for use in HP Mini 110 and Compaq Mini 110 models only) 2048-MB memory module (PC2-5300, 533-MHz, DDR2 for use in HP Mini 110 and Compaq Mini 110 models only) Display Screw Kit (not illustrated) System board (Includes Intel Atom N280 1.66-GHz processor, 512-KB Level 2 cache, 533-MHz front-side bus (FSB), and replacement thermal material) 10.1-inch, standard-definition, AntiGlare Display Assembly (includes WWAN) for use with HP models only 10.1-inch, standard-definition, AntiGlare Display Assembly (includes WWAN) for use with Compaq standard models only WWAN module, for use only in China 10.1-inch high-definition AntiGlare display panel 10.1-inch, high-definition, AntiGlare Display Assembly for use with HP models only 10.1-inch, high-definition, AntiGlare Display Assembly (Includes WWAN) for use with HP models only 10.1-inch, high-definition, AntiGlare Display Assembly for use with Compaq standard models only Bluetooth adapter

Workstation guidelines Follow these grounding workstation guidelines: Cover the workstation with approved static-shielding material. Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and equipment. Use conductive field service tools, such as cutters, screwdrivers, and vacuums. When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe materials. Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and Styrofoam. Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle these items only at static-free workstations. Avoid contact with pins, leads, or circuitry. Turn off power and input signals before inserting or removing connectors or test equipment.
Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm 10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times. On grounded mats with banana-plug connectors, use alligator clips to connect a wrist strap. When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps) can be used at standing workstations and are compatible with most types of shoes or boots. On conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one megohm resistance between the operator and ground. To be effective, the conductive strips must be worn in contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage: Antistatic tape Antistatic smocks, aprons, and sleeve protectors Conductive bins and other assembly or soldering aids Nonconductive foam Conductive tabletop workstations with ground cords of one megohm resistance Static-dissipative tables or floor mats with hard ties to the ground Field service kits Static awareness labels Material-handling packages Nonconductive plastic bags, tubes, or boxes Metal tote boxes Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
Material Antistatic plastic Carbon-loaded plastic Metallized laminate Use Bags Floor mats Floor mats Voltage protection level 1,500 V 7,500 V 5,000 V

Before removing the hard drive or solid-state drive, follow these steps: 1. 2. 3. 4. 5. 6. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. Disconnect all external devices connected to the device. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. Remove the battery (see Battery on page 36). If your device has WWAN capability, remove the SIM (see SIM on page 37. Remove the keyboard (see Keyboard on page 40).
To remove the mass storage assembly: 1. Loosen the Phillips SP2.510.0 captive screw (1), and remove the two Phillips PM2.05.0 screws (2) that secure the assembly to the device.
Use the Mylar tab to slide the assembly to the left (3) to disconnect it, and remove the assembly (4).
Continue with one of the following sections for hard drive or solid-state drive replacement.

Hard drive

1. 2. Remove the 4 Phillips SP3.04.0 screws (1) that secure the hard drive bracket to the hard drive. Using the Mylar tab, lift the bracket (2) away from the hard drive.
Reverse this procedure to install a hard drive.

Solid-state drive

To remove the solid-state drive: 1. Remove the 4 Phillips SP2.03.0 screws (1) that secure the solid-state drive bracket to the solidstate drive.
Lift the solid-state drive (2) to remove it.
Reverse this procedure to install a solid-state drive.

Top cover

Description Top cover (includes TouchPad) Spare part number 537622-001
Before removing the top cover, follow these steps: 1. 2. 3. 4. 5. 6. 7. 8. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. Disconnect all external devices connected to the device. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. Remove the battery (see Battery on page 36). If your device has WWAN capability, remove the SIM (see SIM on page 37. Remove the memory module (see Memory module on page 38 Remove the keyboard (see Keyboard on page 40). Remove the hard drive or solid-state drive assembly (see Mass storage devices on page 45).

Remove the heat sink assembly: 1. Remove the 4 Phillips SP1.51.05 screws (1) that secure the heat sink assembly to the system board. NOTE: The screws are numbered 1 through 4. Follow this order when removing the screws.
Remove the heat sink assembly (2). NOTE: Due to the adhesive quality of the thermal material located between the heat sink assembly and system board components, it may be necessary to move the heat sink assembly from side to side to detach the assembly.
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink assembly and the system board each time the heat sink assembly is removed. Thermal paste is used on the processor (1), and thermal tape is used on the Northbridge chip (2). Replacement thermal material is included with all heat sink assembly and system board spare part kits.
Reverse this procedure to install the heat sink assembly.

System board

Description System board (includes processor and replacement thermal material) Includes Intel Atom N280 1.66-GHz processor, 512-KB Level 2 cache, 533-MHz front-side bus (FSB) Includes Intel Atom N270 1.6-GHz processor, 512-KB Level 2 cache, 533-MHz front-side bus (FSB) 571370-001 537662-001 Spare part number
Before removing the system board, follow these steps: 1. 2. 3. 4. 5. 6. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. Disconnect all external devices connected to the device. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. Remove the battery (see Battery on page 36). If your device has WWAN capability, remove the SIM (see SIM on page 37. Remove the following components: a. b. c. Keyboard (see Keyboard on page 40) Hard drive or solid-state drive (see Mass storage devices on page 45) Top cover (see Top cover on page 48)
When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: WLAN module (see WLAN module on page 51) WWAN module, if included (see WWAN module on page 53) RTC battery (see RTC battery on page 44) Heat sink assembly (see Heat sink assembly on page 59)
Remove the system board: 1. Release the tape securing the WWAN antennas(1).
Disconnect the following cables from the system board: (2) Display panel cable (3) Microphone cable (4) Speaker cable (5) WLAN cables (6) WWAN cables (select models only)

Restoring default settings in the Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is not already running, begin at step 1. If the Setup Utility is already running, begin at step 2. 1. 2. 3. 4. Open the Setup Utility by turning on or restarting the device, and then pressing f10 while the F10 = BIOS Setup Options message is displayed in the lower-left corner of the screen. Use the arrow keys to select Exit > Load Setup Defaults, and then press enter. When the Setup Confirmation is displayed, press enter. To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving Changes, and then press enter.
The Setup Utility default settings go into effect when the device restarts. NOTE: Your password, security, and language settings are not changed when you restore the factory default settings.
Exiting the Setup Utility
You can exit the Setup Utility with or without saving changes. To exit the Setup Utility and save your changes from the current session: If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to select Exit > Exit Saving Changes, and then press enter. To exit the Setup Utility without saving your changes from the current session: If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to select Exit > Exit Discarding Changes, and then press enter. After either choice, the device restarts and loads the operating system.

Chapter 5 Setup Utility

Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options. NOTE: Some of the Setup Utility menu items listed in this chapter may not be supported by your device.

Main menu

Select System information To do this View and change the system time and date. View identification information about the device. View specification information about the processor, memory size, and system BIOS.

Security menu

Select Administrator password Power-On Password To do this Enter, change, or delete an administrator password. Enter, change, or delete a power-on password.
System Configuration menu
Select Language Support Processor C4 State Boot Options To do this Change the Setup Utility language. Enable/disable the processor C4 sleep state. Set the following boot options: f10 and f12 Delay (sec.)Set the delay for the f10 and f12 functions of the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20). Internal Network Adapter bootEnable/disable boot from Internal Network Adapter. Boot OrderSet the boot order for: Internal hard drive (select models only) USB Floppy USB CD/DVD ROM Drive USB flash drive USB Hard drive USB Card Reader Network adapter NOTE: Only the devices attached to the system will appear in the boot order menu.

System DMA specifications
Hardware DMA DMA0 DMA1 * DMA2 * DMA3 DMA4 System function Not applicable Not applicable Not applicable Not applicable Direct memory access controller
System interrupt specifications
Hardware IRQ IRQ0 IRQ1 IRQ8 IRQ9 * IRQ12 IRQ13 IRQ14 IRQ15 IRQ16 System function System timer Standard 101-/102-Key or Microsoft Natural PS/2 Keyboard System CMOS/real-time clock Microsoft ACPI-compliant system Synaptics PS/2 TouchPad Numeric data processor Primary IDE channel Intel 82801G (ICH7 Family) SMBus Controller27DA Broadcom 802.11b/g WLAN no. 2 Intel 82801G (ICH7 Family) PCI Express Root Port27D0 Intel 82801G (ICH7 Family) USB Universal Host Controller27CB Microsoft UAA Bus Driver for High Definition Audio Mobile Intel 945 Express Chipset Family IRQ17 IRQ18 IRQ19 IRQ23 Intel 82801G (ICH7 Family) PCI Express Root Port27D2 Intel 82801G (ICH7 Family) USB Universal Host Controller27CA Intel 82801G (ICH7 Family) USB Universal Host Controller27C9 Intel 82801G (ICH7 Family) USB Universal Host Controller27C8 Intel 82801G (ICH7 Family) USB2 Enhanced Host Controller27CC * Default configuration
System I/O address specifications
I/O address (hex) 000 - 00F 000 - CF- 01F 020 - - 03F 040 - - 05F 060 - - - 062 063- - - - - 06F 070 - - 07F 080 - - - - - - 08B 08C - 08E 08F - 08F 090 - 09F 0A0 - 0A1 0A2 - 0BF 0C0 - 0DF 0E0 - 0EF 0F0 - 0FF 1F0 - 1F- 277 System function (shipping configuration) DMA controller PCI bus Motherboard resources Programmable interrupt controller Motherboard resources System timer Motherboard resources Standard 101-/102-Key or Microsoft Natural PS/2 Keyboard System speaker Microsoft ACPI-Compliant Embedded Controller Motherboard resources Standard 101-/102-Key or Microsoft Natural PS/2 Keyboard Motherboard resources Microsoft ACPI-Compliant Embedded Controller Motherboard resources System CMOS/real-time clock Motherboard resources Motherboard resources DMA controller Motherboard resources DMA controller Motherboard resources DMA controller Motherboard resources DMA controller Motherboard resources Programmable interrupt controller Motherboard resources DMA controller Motherboard resources Numeric data processor Primary IDE channel ISAPNP Read Data Port
I/O address (hex) 279 - 279 3B0 - 3BB 3C0 - 3DF 3F6 - 3F- 41F 480 - 4BF 4D0 - 4D- - 87F A79 - A79 0D00 - FFFF D480 - D49F D800 - D81F D880 - D89F DC00 - DC1F DC80 - DC87 E000 - EFFF FFA0 - FFAF
System function (shipping configuration) ISAPNP Read Data Port Mobile Intel 945 Express Chipset Family Mobile Intel 945 Express Chipset Family Primary IDE channel Intel 82801G (ICH7 Family) SMBus Controller27DA Motherboard resources Motherboard resources Motherboard resources Motherboard resources ISAPNP Read Data Port PCI bus Intel 82801G (ICH7 Family) USB Universal Host Controller27C8 Intel 82801G (ICH7 Family) USB Universal Host Controller27CA Intel 82801G (ICH7 Family) USB Universal Host Controller27C9 Intel 82801G (ICH7 Family) USB Universal Host Controller27C8 Mobile Intel 945 Express Chipset Family Intel 82801G (ICH7 Family) PCI Express Root Port27D2 Intel 82801G (ICH7 Family) Ultra ATA Storage Controllers27DF

If possible, back up all personal files. Restart the computer, and then insert the Windows Vista operating system DVD into the optical drive before the Windows operating system loads. When prompted, press any keyboard key. Follow the on-screen instructions. Click Next. Select Repair your computer. Follow the on-screen instructions.
104 Chapter 8 Backup and recovery
Windows XP backup and recovery
Use the instructions in this section if Windows XP is installed on your computer. To protect your information, use the Windows Backup utility (select models only) to back up files and folders or create recovery points. In case of system failure, you can use the backup files to restore your computer. Windows provides the following options: Backing up individual files and folders Backing up all files and folders Scheduling automatic backups Creating recovery points Recovering information For detailed instructions, perform a search for these topics in Help and Support.
NOTE: In case of system instability, HP recommends that you print the recovery procedures and save them for later use.
Recovery after a system failure is as complete as your most current backup. You should create your initial backup immediately after software setup. As you add new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup. You can back up individual files or folders to an optional external hard drive or to a network drive. Note the following when backing up: Store personal files in the My Documents folder, and back it up periodically. Back up templates stored in their associated programs. Save customized settings that appear in a window, toolbar, or menu bar by taking a screen shot of your settings. The screen shot can be a time saver if you have to reset your preferences. To copy the screen and paste it into a word-processing document: a. b. Display the screen you want to save. Copy the screen image: To copy only the active window, press alt+fn+prt sc. To copy the entire screen, press fn+prt sc. c. Open a word-processing document, click Edit > Paste. The screen image is added to the document. d. Save the document.

External monitor 109

RJ-45 (network)

Pin 7 8

Signal Transmit + Transmit Receive + Unused Unused Receive Unused Unused
110 Chapter 9 Connector pin assignments

Universal Serial Bus

Pin 3 4
Signal +5 VDC Data Data + Ground

Universal Serial Bus 111

10 Power cord set requirements
The wide range input feature of the device permits it to operate from any line voltage from 100 to 120 volts AC or from 220 to 240 volts AC. The 3-conductor power cord set included with the device meets the requirements for use in the country or region where the equipment is purchased. Power cord sets for use in other countries and regions must meet the requirements of the country or region where the device is used.
Requirements for all countries and regions
The requirements listed below are applicable to all countries and regions: The length of the power cord set must be at least 1.5 m (5.0 ft) and no more than 2.0 m (6.5 ft). All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country or region where the power cord set will be used. The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage rating of 125 or 250 V AC, as required by the power system of each country or region. The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard Sheet C13 connector for mating with the appliance inlet on the back of the device.
112 Chapter 10 Power cord set requirements
Requirements for specific countries and regions
Country/region Australia Austria Belgium Canada Denmark Finland France Germany Italy Japan The Netherlands Norway The People's Republic of China South Korea Sweden Switzerland Taiwan The United Kingdom The United States 1. Accredited agency EANSW OVE CEBC CSA DEMKO FIMKO UTE VDE IMQ METI KEMA NEMKO CCC EK SEMKO SEV BSMI BSI UL Applicable note number 2
The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole grounding type with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration. The appliance coupler, flexible cord, and wall plug must bear a T mark and registration number in accordance with the Japanese Dentori Law. The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00-mm conductor size. The wall plug must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V) configuration. The flexible cord must be Type RVV, 3-conductor, 0.75-mm conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used. The flexible cord must be Type VCTF, 3-conductor, 0.75-mm conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.

Requirements for specific countries and regions 113

11 Recycling

When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal.

Display

WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. CAUTION: The procedures in this chapter can result in damage to display components. The only components intended for recycling purposes are the liquid crystal display (LCD) panel and the backlight. When you remove these components, handle them carefully. NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly that might require special handling at end-of-life. Disposal of mercury may be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities, or see the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org. This section provides disassembly instructions for the display assembly. The display assembly must be disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2).
NOTE: The procedures provided in this chapter are general disassembly instructions. Specific details, such as screw sizes, quantities, and locations, and component shapes and sizes, can vary from one computer model to another.

114 Chapter 11 Recycling

Perform the following steps to disassemble the display assembly: 1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly.
Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel disengages from the display assembly. Remove the display bezel (3).

Display 115

Disconnect all display panel cables (1) from the display inverter and remove the inverter (2).
Remove all screws (1) that secure the display panel assembly to the display enclosure. Remove the display panel assembly (2) from the display enclosure.
Turn the display panel assembly upside down. Remove all screws that secure the display panel frame to the display panel.
Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to the display panel frame.

116 Chapter 11 Recycling

10. Remove the display panel frame (2) from the display panel.
11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlight cover (2) and swing it outward.

H hard drive precautions 30 product description 2 spare part number 19 specifications 77 hard drive recovery 104 hard drive self test 74 headphone (audio-out) jack 12 headphone jack pin assignments 108 headphones 12 heat sink assembly removal 59 spare part number 59 hinge covers illustrated 21, 64 spare part number 21, 64 Home key 8 HP Mi Restore Image Creator identifying 97 using 98 I I/O address specifications 81 internal display switch, identifying 13 internal media cards, product description 3 internal microphone, identifying 13 interrupt specifications 80 J jacks audio-in (microphone) 12 audio-out (headphone) 12 RJ-45 (network) 11 K keyboard product description 3 removal 40 spare part number 18, 40 keys fn 7, 8

Index 121

graphics 1 hard drive 2 internal media cards 3 keyboard 3 mass storage device 2 memory module 1 modem 2 operating system 4 optical drive 2 panels 1 pointing device 3 ports 3 power requirements 3 processors 1 product name 1 security 4 serviceability 4 solid-state drive 2 wireless 3 product name 1 Program Switcher key 8 R recovery partition 104 release latches battery 14 removal/replacement preliminaries 29 procedures 34 restoring HP Mi Restore Image Creator 98 System Restore 98 restoring default settings 72 restoring the hard drive 104 right TouchPad button, identifying 5 RJ-45 (network) jack, identifying 11 RJ-45 jack pin assignments 110 RTC battery removal 44 spare part number 20, 44 Rubber Kit, spare part number 24 S Screw Kit contents 84 spare part number 24
screw listing 84 security cable slot, identifying 12 Security menu 73 security, cable slot 12 security, product description 4 selecting in the Setup Utility 71 serial number 16, 34 service considerations 29 service tag 16, 34 serviceability, product description 4 SIM removal 37 solid-state drive product description 2 solid-state drives spare part number 19 speaker assembly illustrated 21, 64 removal 67 spare part number 21, 64 speakers, identifying 13 specifications device 75 display 76 hard drive 77 I/O addresses 81 interrupts 80 memory map 83 solid-state drive 78 system DMA 79 static-shielding materials 33 switches power 9 wireless 10 system board removal 61 spare part number 20, 61 System Configuration menu 73 system DMA 79 system information 73 system memory map 83 System Restore identifying 97 using 98 T tools required 29
top cover removal 48 spare part number 19, 48 TouchPad buttons 5 identifying 5 TouchPad scroll zone, identifying 5 transporting guidelines 32 U USB board removal 55 spare part number 55 USB board, spare part number 19, 55 USB port pin assignments 111 USB ports, identifying 11, 12 V vents, identifying 12, 14 W webcam light, identifying 13 webcam module illustrated 21, 64 removal 69 spare part number 21, 64 webcam, identifying 13 Windows applications key, identifying 7 Windows Backup utility 105, 106 Windows logo key, identifying 7 Windows recovery 106 Windows Vista operating system DVD 104 wireless antenna removal 70 spare part number 21, 64 wireless antennas 15 wireless light, identifying 10 wireless module, product description 3 wireless switch, identifying 10 WLAN antennas, identifying 15 WLAN module removal 51 spare part number 19, 51 workstation guidelines 32 WWAN antennas, identifying 15

Windows. Life without WallsTM. HP recommends Windows 7.

Accessories

Hangout with the world wherever you go
Express yourself in different ways!
Windows XP * The HP Mini 1 with Windows XP is your essential 10 mobile companion that fits into your backpack, purse or briefcase. Surf the web to check the latest happening places. Listen to music and watch videos while you travel around the city. Windows 7 * Make the things you do every day faster and easier. Windows 7 is designed to improve computing performance, so your HP Mini 1 is faster, more 10 secure and more reliable. Enjoy fewer clicks, faster searching and simpler ways to connect!
*Choice of operating systems available.

HP Mini 1 10

Specifications Processor Intel Atom Processor N270 (1.60GHz, 512KB L2, 533Mhz FSB) Intel Atom Processor N2801 (1.66GHz, 512KB L2, 667Mhz FSB)
Genuine Windows XP Home Service Pack 3 for ULCPC Programme Operating System/ Genuine Windows 7 Starter Computing Experience Genuine Windows 7 Home Basic (Only available in China)
HP USB/Wireless/ Bluetooth/ Optical/Laser Mouse

HP Slim External DVDRW

Now with HP QuickWeb and HP QuickSync
Chipset Memory Internal Storage Display & Camera Graphics Audio Video Accelerator Wireless Support Communications Ports & Connectors Input Device
Intel 945GSE Chipset 1024MB/2048MB DDR2 System Memory, Supports up to 1GB for Windows XP and 2GB for Windows 7 160GB 5400RPM 250GB, 320GB 5400RPM (Windows 7) 10.1 Diagonal WSVGA LED Anti-glare Widescreen Display (1024 x 600) 10.1 Diagonal HD LED Anti-glare Widescreen Display (1366 x 768) Webcam with Integrated Microphone Intel Graphics Media Accelerator 950 (Shared) Internal Stereo Speakers Broadcom Crystal HD Enhanced Video accelerator (Configurable) 1b/g WLAN2 + Bluetooth, HP un2420 EV-DO/HSPA Mobile Broadband (Configurable) 802.1 1b/g WLAN2, 802.1 Integrated 10/100 BASE-T Ethernet LAN (RJ-45 connector)3 5-in-1 integrated Digital Media Reader for Secure Digital cards, MultiMedia cards, Memory Stick, Memory Stick Pro, or xD Picture cards, 3 USB 2.0, VGA, Headphone-out/Microphone in combo jack, AC Power 92% Full-Sized Keyboard, Touch Pad with dedicated vertical Scroll Up/Down Windows XP Home HP Battery Check, HP User Guides, Help and Support Center, Adobe Reader, HP Wireless Assistant, Sun Java VM, 1 Adobe Flash Player, Windows Internet Explorer 8, Windows Media Player 1 8, HP QuickSync, Back On Track Recovery, HP QuickWeb7, Symantec Norton Internet Security 2009 Consumer (60 days live updates), Microsoft Works10, Office Trial: Microsoft Office 2007 Home/Student (60 day Trial)10 Windows 7 HP Support Assistance, HP Software Update, HP User Guides, Adobe Reader, HP Wireless Assistant, Recovery Manager4, Sun Java VM, Adobe Flash Player, HP QuickSync, HP QuickWeb7, Back On Track Recovery9, Symantec Norton Internet Security 2009 Consumer (60 days live updates), Microsoft Works10, Office Trial: Microsoft Office 2007 Home/Student (60 day Trial)9
The HP Mini 1 is the perfect notebook that lets you indulge in 10 delightful bits of information snacking and stay in touch with friends while zooming in and out of your busy schedule. Get connected with everyone and skyrocket to the latest events as you go from your best friends gig to meeting new people at that next art installation. Available in Black Swirl Imprint for the sophisticated, White Swirl Imprint for the captivating and Pink Chic Imprint for the stylish, this ultra mobile machine is the perfect size that allows you to simply grab and chuck into your bag as you rush for your next meeting or social activity.

1. Intels numbering is not a measurement of higher performance. 2. Wireless access point and Internet service required. Availability of public access points limited. 3. nternet access required and sold separately. I 4. or HDD model only. F 5. eight will vary by configuration. W 6. attery life will vary depending on the product, model, configuration, loaded applications, features and power B management settings. The max capacity of the battery will decrease with time and usage. 7. Not available in China, Taiwan, Hong Kong, Korea and Japan. 8.Windows Media Player 1 is not available in Korea. 1 9. For SSD model only. 10.Only available in Taiwan and Hong Kong. Note: Images in this brochure are approximate guides only. Information published may refer to products, programs or services that may not be available in your country. Please consult your local HP business contact for more information. This system may require upgraded and/or separately purchased hardware and/or a DVD drive to install the Windows 7 software and take full advantage of Windows 7 functionality. See http://www.microsoft.com/windows/windows-7/ for details. Microsoft, Windows and Windows XP/Vista/7 are trademarks of the Microsoft group of companies. 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical errors or omissions contained herein.

Software

Visit www.hp.com/apac/hpmini Printed in Singapore, September 2009
Security Dimension Weight Power Accessory
Kensington MicroSaver lock slot, Power-on password, Accepts 3rd party security lock devices 17.2cm (W) x 26.15cm (L) x 2.63-3.27cm (H) From 1.06kgor 6-Cell Lithium-ion6 (28Whr, 55Whr), 30W AC Adapter 6-Cell Lithium-ion (55Whr), 30W AC Adapter
The ultra mobile, stylish and social mini notebook

SPEEDY ACCESS TO THE WEB

A push of the power button instantly 1 launches HP QuickWeb ! This new software allows access to the Internet, web-based applications, your music and photos all before the full system boot-up!

Fine-tuned to your needs

The 10.1-inch diagonal widescreen display is thoughtfully designed to help you easily view documents, or webpages. The HP Mini 1 also boasts 10 a 92% full-sized keyboard with traditional keyboard placements for you to smoothly and easily type out your latest blurbs on Facebook or Twitter.
Updating your files on-the-go is childs play! Your HP Mini will automatically synchronise your edited files with your home or office PC with HP QuickSync, via a wireless connection2. With technology taking care of your work, you can take a breather at home and relax from your busy social life!
Effortless syNchronisation
HP is the worlds no. 1 PC Maker* Get in on the latest news
Stay in touch with your friends through email, chat3, web conferencing, VOIP4, integrated webcam and microphone - brought to you by your ultra mobile digital sidekick! Equipped with WLAN and optional WWAN, you can easily tune into your personalised homepage and have the latest events at your fingertips!
Consumers worldwide have benefitted from HPs broad range of PC solutions, designed with intuitive touches, engineered for enjoyment and built to deliver the latest technology. Enjoy world-class quality, reliability and 24/7 support with every HP PC you bring home!
* HP is No. 1 in the Worldwide Total Client PCs and Total Notebook market in terms of shipments since Q4 2006.
Source: IDC Worldwide Quarterly PC tracker, Q1 2009
Express your individuality
Get vogue with the sophisticated Black Swirl Imprint, captivate with the White Swirl Imprint, or let your style take over with the Pink Chic Imprint! Dressed to kill in three trendy colours and designs, the HP Mini 1 is set to show 10 off your hip fashion sense.
With up to 320GB5,6 hard drive, you can store even more music, photos and files! Theres no running out of room with this mobile mini-giant!
Footnotes 1 Not available in China, Taiwan, Hong Kong, Korea and Japan. 2 Wireless access point and Internet access required and sold separately. Availability of public wireless access points limited. 3 Internet access required and sold separately. 4 Requires a separately purchased Internet service and VOIP service contracts. 5 Actual formatted capacity is less. Up to 8GB of hard drive reserved for system recovery software. 6 Only available with Windows 7.

Tiny but spacious