2002 Hewlett-Packard Company

hp workstation xw5000

All product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided as is without warranty of any kind and is subject to change without notice. The warranties for Hewlett-Packard products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty.

illustrated parts map

December 2002
Document number 309234-001
Spare part number 316158-001
Standard and Optional Boards (not illustrated)
System board Optional IEEE-1394 FireWire adapter card 304122-001 287476-001 311505-001
Optional SCSI adapter card Processor (12 standoffs included) Xeon 2.4 GHz/533 MHz primary processor Xeon 2.66 GHz/533 MHz primary processor
288689-001 305579-001 305051-001 315637-001 288689-001 305579-001 305051-001 315637-001 307543-001 285946-001
Xeon 2.8 GHz/533 MHz primary processor Xeon 3.06 GHz/533 MHz primary processor Xeon 2.4 GHz/533 MHz secondary processor Xeon 2.66 GHz/533 MHz secondary processor

System Unit

1 Side panel, left (assembly number only) Side panel, right (assembly number only) 4 * * System chassis Front bezel Power supply Front bezel, I/O Control panel 310425-001 310426-001
Xeon 2.8 GHz/533 MHz secondary processor Xeon 3.06 GHz/533 MHz secondary processor Processor Heatsink LAN 10/100 (footprint compatible with GbE)
Memory modules 128 MB DIMM/dual-channel unbuffered DDR 266 272931-001

Cables

Not available as spare 312508-001 307544-001 312509-001 312510-2 * 3 * * * * CD-ROM audio cable Floppy cable IDE cable, optical drives IDE cable, hard drives 4 port SCSI cable 5 port SCSI cable SCSI LED cable NVIDIA Quadro4 NVS, VGA cable assembly NVIDIA Quadro4 NVS, DVI cable assembly Adapter connector (dongle) DVI to VGA 312511-001 312513-001 312512-001 307545-001 307546-001 308556-001 311506-001 285379-001 285380-001 202997-001
256 MB DIMM/dual-channel unbuffered DDR 266 272932-MB DIMM/dual-channel unbuffered DDR 266 272933-GB DIMM/dual-channel unbuffered DDR MB stacked DIMMs Graphics cards NVIDIA Quadro4 200NVS NVIDIA Quadro-EX ATI FireGL 8800 NVIDIA Quadro4 750XGL NVIDIA Quadro4 380XGL NVIDIA Quadro4 900XGL NVIDIA QuadroNVS Wildcat III 6110 274622-001 250206-001 313486-001 271241-001 311507-001 285378-001 274623-001 273440-001 272934-001 300699-001

* Not shown

Miscellaneous Parts and Assemblies (not illustrated)
Rear fan Battery Plastics kit Screw kit 312507-001 319603-001 126983-001 257050-001
Documentation (not illustrated)
Illustrated Parts Map* Getting Started Guide Technical Reference Guide* Installation Poster 309234-001 308303-001 309233-001 308301-001
Worldwide Limited Warranty Statement and Technical 308703-xx1 Support

Mass Storage Devices

Floppy drive Hard drives U320 (U160 compatible) SCSI 36 GB, 10K RPM 73 GB, 10K RPM 146 GB, 10K RPM 18 GB, 15K RPM 36 GB, 15K RPM 73 GB, 15K RPM IDE/ATA100, 7200 RPM 40 GB 80 GB 120 GB 3 Optical drives DVD+RW drive 48x CD-ROM drive 16x DVD drive 48x CD-RW drive 289591-001 308562-001 308563-001 308564-001 308559-001 308560-001 308561-001 311769-001 311770-001 315638-001 311771-001 311772-001 315639-001 312506-001

Mouse Options (not illustrated)
3-button mouse 2-button mouse 302780-001 302779-001
* The above part numbers represent document part numbers, not spares numbers. The only spared documents are this document (316158-001) and the Technical Reference Guide (316157-001).
Keyboards (not illustrated)
Easy Access Keyboard 271122-xxx Taiwan Korea China SingaporeMalaysia Japan Japan-English Indonesia-English India English Germany -AB5 -KD5 -AA5 -B35 -195 -B35 -B35 -B35 -045 Spain France Netherlands Switzerland - EN/IT Switzerland - FR/GR UK English Italy United States 271122-xxx -075 -055 -B35 -115 -115 -035 -065 -005

Motherboard Layout

HP Setup Program Features
keyboard and mouse rear USB parallel port serial port LAN rear audio ATX 12 V power main chassis fan AGP slot PCI slots CD-ROM audio auxiliary audio switches (see table)
memory module pair 1 memory module pair 2 processor fan processor main power supply auxiliary power floppy disk drive primary IDE channel secondary IDE channel
F2: Boot to start F1: Help F7/F8: Change value F9: Return system configuration to default F10: Return to previous value Up/Down arrow keys: Highlight an item or menu Enter: Select an item or menu Esc: Exit BIOS Version OS Reset Configuration Data System Time System Date Processor(s) Chipset Floppy Disk Drive IDE Devices Integrated SCSI Controller Integrated NIC Integrated USB Integrated I/O ports Integrated Audio AGP Graphics Slot PCI Device Slots Administrative Password Set Administrator Password Clear All Passwords User Password Set User Password Power-on Password Start from floppy Start from CD-ROM Start from Hard Disk Drive Write on Floppy Disks Locked Setup Configuration Hard Disk Boot Sector Quick Boot Mode Display Option ROM Messages Preferred Video Boot Device Priority Remote Power-on Remote Wake-up After Power Failure

Main Menu

Advanced Menu
battery control panel front USB and audio

Security Menu

System Board Switches
Switch Default Position off off off off Use clear password crisis recovery clear CMOS (reserved) Boot Menu
Clearing the Password, Crisis Recovery, and Clearing CMOS
1. 2. 3. 4. 5. 6. Turn off the system and disconnect power. Set the appropriate switch to on (see System Board Switches table above). Reboot computer. Turn off computer. Set the appropriate switch to off (see System Board Switches table above) Turn on computer. Power Menu

Feature Overview

Processor(s) Chipset One Northwood 2.4, 2.66, or 2.8 GHz (may support Hyperthreading) Intel Granite Bay, ICH4 Six-layer ATX form-factor Double-sided Two power/ground layers Four signal layers
System Hardware Interrupts
The BIOS and operating system handle hardware interrupts dynamically. Windows 2000 and Windows XP can change the interrupt settings when you add or remove devices. You can use Device Manager to gather information about a particular interrupt. See your operating system documentation for more information.

System board

Operating system
Computer LEDs (On front panel of computer)
LED Power LEDs Color Solid green Solid yellow LED Activity System on Workstation is in standby or hibernate mode. (Refer to the hp workstation xw8000 Getting Started Guide or your operating system documentation for more information.) System error Accessory card slots SCSI controller IDE/ATA controller Mass storage BIOS Memory
Includes one of the following: Windows XP Windows 2000 Linux Phoenix ACPl1.ob Four DIMMs: Dual channel unbuffered DDR MB, 256 MB, 512 MB, 1 GB DIMMs 4 GB maximum Five PCI slots, 32-bit, 33 MHz One 8x AGP Pro50 video card slot Optional SCSI Card Integrated IDE/ATA Controller: 2xATA 100/66/33 Includes one or more of the following drives: U-320 SCSI (U-160 compatible) 10K RPM; 36, 73, or 146 GB 15K RPM; 18, 36, or 73 GB Requires optional SCSI controller card IDE/ATA RPM; 40, 80 or 120 GB May include one or two of the following optical drives: 48x CD-ROM 48x CD-RW 16x DVD DVD+RW On-board audio controller: Rear panel connectors (mic, line-in, line-out) Front panel connectors (mic, headphone) 10/100 LAN port Serial port Parallel port SCSI port (with optional SCSI controller card) 1394/Firewire port (with optional 1394 card) Quad USB PS2 keyboard port PS2 mouse port Audio line-in, line-out and microphone Dual USB Headphone Microphone 1394/Firewire (with optional 1394 controller card)
Flashing yellow Flashing red Solid red Hard Disk Activity LED
Flickers when your hard disk is being accessed. Activated during Power-on Self Test (POST) and during hard disk drive access.

Memory Loading Order

DDR SDRAM must be loaded as matched pairs when more than one DIMM is installed. For example, if you place a memory module of 512 MB in one slot of Memory module pair 1, you must also insert a 512 MB module in the second slot of the pair. Load modules in matched pairs: Memory module pair 1: Slots 1 & 2 Memory module pair 2: Slots 3 & 4 Optical drive(s)

Hard Drive Loading Order

System supports up to 5 SCSI hard disk drives or up to 2 IDE hard disk drives. Note: The drive rails are not screwed on to the drive. Do not hold the drive by the rails when it is not installed in a drive bay or you may drop and damage the drive. Note: For any HP workstation, if you intend to boot from a bootable PCI device that you are installing (for example, Network adaptor, SCSI), ensure that OPTION ROM loading/scanning for the PCI slot used is enabled. To do this, use the BIOS Setup Utility of the HP workstation that you are installing the PCI device into. Failure to enable the OPTION ROM loading/scanning for the slot used will prevent the system from using that device as a bootable PCI device. For the HP workstation xw5000, HP also recommends you limit the number of enabled bootable devices in PCI slots 1-4, if you have an enabled bootable device in PCI slot 5. By doing so, you will help conserve the OPTION ROM and ensure that the device in PCI slot 5 can be booted from. See the Technical Reference Guide for detailed instructions on hard drive loading orders.

Rear panel connectors

Front panel connectors

IDE Drive Loading Order

SCSI Drive Loading Order Internal connectors
One floppy disk controller Two IDE connectors supporting two optical drives or two hard drives One U-320 SCSI connector supporting up to three hard drives (with optional SCSI controller card) For a complete and current list of supported cards, go to http://www.hp.com/workstations/products/winnt/leadership_graphics/
5th drive mounting screw storage

Graphics

Attach 5th drive here