Using the Nikon D2H WiFi camera over BGAN

Version June 2008

inmarsat.com/bgan
Whilst the information has been prepared by Inmarsat in good faith, and all reasonable efforts have been made to ensure its accuracy, Inmarsat makes no warranty or representation as to the accuracy, completeness or fitness for purpose or use of the information. Inmarsat shall not be liable for any loss or damage of any kind, including indirect or consequential loss, arising from use of the information and all warranties and conditions, whether express or implied by statute, common law or otherwise, are hereby excluded to the extent permitted by English law. INMARSAT is a trademark of the International Mobile Satellite Organisation, Inmarsat LOGO is a trademark of Inmarsat (IP) Company Limited. Both trademarks are licensed to Inmarsat Global Limited. Inmarsat Global Limited 2007. All rights reserved.

Contents

1 Overview 1.Prerequisites Configuring the camera 2.1 2.2 2.3 2.Network Settings Camera Wireless Settings Network Settings - TCP/IP Settings Network Settings - FTP Settings Setting up the BGAN terminal
Further details and support

Overview

Nikon's Professional D2H SLR camera over BGAN can keep you on top of breaking news with the click of a camera. BGANs WiFi connectivity enables you to use the Nikon D2H to transfer images directly from the camera immediately after taking the shot, so that you can be among the first to get your images back to the office and into the press. As long as you are with in the 300m (depending on environmental conditions) wireless range of the BGAN terminal, you can continue taking pictures knowing that they are automatically getting sent back to headquarters. Note You must have the Flash card (memory) in the camera for this solution to work.
Prerequisites As a minimum, you must have the following equipment: BGAN terminal with WiFi. Nikon D2H camera with WiFi pack. Memory card. FTP server address.

Configuring the camera

To set up the Nikon D2H WiFi camera a. Turn on the Nikon Camera, and press Menu on the back of the camera. b. Go to the Setup menu, select USB, and change the USB option to FTP. c. Turn off the camera, and connect the WT-1 wireless access point pack. d. Plug in the USB cable, remove the protecting rubber cover on the bottom of the camera and secure the locking wheel on the WT-1. If the WT-1 wireless access point is connected properly the Power light on the access point should go green. e. Turn the camera back on and return to the setup menu. There will now be a 'Wireless LAN' option in the setup menu. f. Select Wireless LAN, and make sure that: The 'Transceiver' is on Auto send is switched on You have selected the type of file you want to send Note Sending Images as NEF produces very large File sizes, which take longer to send.
Network Settings Camera Wireless Settings You will also need to set up the camera to talk to the HNS 9201 or the Thrane & Thrane EXPLORER 700. You can do this by going to Network Settings in the Wireless LAN menu. NOTE: Make sure that you have turned on the wireless interface on the BGAN terminal, and that you know the SSID To set up the camera wireless settings, select the Wireless option, and make sure that you: Change the Communication mode to Infrastructure. Change the SSID to the SSID of the BGAN terminal.

Page 1

Enter encryption the information under the Encryption menu, if encryption is set on the BGAN terminal. You do not need to enter any information under Channel.
Network Settings - TCP/IP Settings Under IP Address, enter an IP address for the Camera. For the HNS 9201, this must be in the 192.168.128.101 range. For the EXPLORER 700, this must be in the 192.168.0.2 range. It is recommended that you use DHCP, and check the Obtain Automatically check box. Enter 255.255.255.0 for the subnet mask. Enter the gateway address for the BGAN terminal. For the HNS 9201, enter 192.168.128.100. For the EXPLORER 700, enter 192.168.0.1. If you are not using an IP address for you FTP server, you must enable DNS and enter a DNS address. For the HNS 9201, open BGAN LaunchPad, and from the main menu select Terminal > IP configuration. Enter the address listed in upper field. For the EXPLORER 700, the DNS address is 192.168.0.1.

Network Settings - FTP Settings Server: Enter the FTP server address that you want to upload the images to. User: Enter a username and password for the FTP server. Proxy: If you need to connect to the FTP server through a proxy, you must enter the details here

Page 2

Advanced: Enter Port information, and if you want to use Passive mode check the box next to PASV mode. You are now ready to begin taking pictures with automatic transfers. As long as you are in range of the BGAN terminal, your pictures will be automatically be uploaded to your desired FTP site as you take them. Note Note Your BGAN terminal must be set to register and activate a standard IP data connection automatically As the WT-1 Access Point draws it power directly from the camera, the battery will not last as long as you may be used to.
Setting up the BGAN terminal This section explains how to set up the BGAN terminal for use with the Nikon D2H WiFi camera. Equipment needed Nikon D2H camera. Nikon WT-1 Wireless Access Point. HNS 9201 terminal, or EXPLORER 700 terminal. HNS 9201 Set up the terminal to establish a Standard IP data connection automatically EXPLORER 700 Point and register the terminal on the BGAN network, as normal. When you take the picture, the camera should automatically open a PDP data connection and start to transfer your images. This is indicated by the blinking busy light on the WT-1 access point.
Inmarsat contact: Customer_care@inmarsat.com

Page 3

FEB 2004 - JUL 2004

Shutterbug July 2004

Shutterbugs Uwe Steinmueller summarized his review of the Nikon D2h by saying, There is no other camera in this league on the market right now. Focusing on the D2Hs unique features, Steinmueller also praised the cameras light but professional feel. From seeing 100% of the image in the viewfinder, to taking 2000 shots with one battery charge, Shutterbug magazine proclaimed the Nikon D2H as a statement on technology by Nikon to all professional photographers.
American Photo May/June 2004
Reviewed by Jonathan Barkey in American Photo, the D2H gained respect from the editor for its high image quality and the professional design of the camera. Barkey was impressed with the D2Hs high speed and the instant post-shot review function. Barkey was also impressed by the new auto flash system and enhanced metering system, as well as the innovative design of the controls on the camera. The review also touched upon the wireless innovation, and Barkey was impressed and thrilled with the ability to take images and to see them simultaneously transmit to his computer.
Petersens Photographic March 2004
In this review by B. Moose Peterson and Vincent Versace, they both found the D2H to be an incredible machine. Both reviewers were impressed with the D2Hs super-quick and accurate AF system that includes automatic focus tracking and Lock-On, and the 8-fps shooting capability. Vincent Versace stated that the auto white balance is the best Ive seen on any camera to date, and both reviewers were pleased with the 100% viewfinder on the D2H and said that coupled with the AF systems, the D2H is a powerful tool.
Popular Photography February 2004
In this review by Mike McNamara, he reviewed and tested the D2H and was impressed by the D2Hs speed and new, innovative features. The large, accurate viewfinder as well as the incredibly fast start-up of the camera and high image quality also impressed McNamara. Upon completing his review, McNamara stated that the camera would gain the respect and attention of photojournalists and action photographers who demand high quality performance and image quality.