L2 Cache

Video RAM
1MB Flash ROM for system BIOS Suspend to memory or hard disk drive Various Hotkey functions for system control Complete ACPI 1.0b functionality
Battery Pack 9-cell Lithium Ion smart battery pack with 10.8V*6000mAh Approximately 12 hours or longer charging time to 100% battery capacity with system switched on. Approximately 4 hours charge time to 100% battery capacity with system switched off. Approximately 1.5 days discharging time in Sleep Mode for the 9-cell battery. Discharge time in shutdown mode is approximately 1 month * The availability of this battery is dependent on the model you purchased.
Disclaimer (Battery Life)
For more information on the Disclaimer regarding Battery Life, please refer to the Disclaimers section in Chapter 11. RTC Battery The computer has an internal battery to back up its Real Time Clock (RTC), calender and setup information. This battery will last for an average of one month with no external power source. The universal AC adapter provides power to the system and recharges the batteries when they are low. It comes with a detachable power cord.

AC adapter

Floppy Disk Drive devices
External USB Floppy Disk Drive (depends on the model purchased)

TouchPad/Dual Mode Pad

A TouchPad/Dual Mode Pad and control buttons in the palm rest enable control of the on-screen pointer. The Dual Mode Pad is a TouchPad that provides normal touchpad features in its default mode and switches to a DualMode interface when the upper right corner of the TouchPad is tapped. Tapping the same corner again will revert to normal pointing mode.
The volume control on the right side of the TouchPad and print button may not function with some applications.
17 TFT screen with a resolution of 1440 horizontal x 900 vertical pixels WXGA+ or 1680 horizontal x 1050 vertical pixels WSXGA+. (Depending on model you purchased)

Disclaimer (LCD)

For more information on the Disclaimer regarding LCD, please refer to the Disclaimers section in Chapter 11. Graphics controller NVIDIA GeForce Go 8700M GT (Graphics controller chipset depends on the model purchased) The graphics controller maximizes display performance. Refer to Display Modes section in Appendix B for more information.

TouchPad Control Buttons

Power Button

Internet Button*

CD/DVD Button*

Play/Pause Button*

Stops playing the CD, DVD or digital audio. (The availability of this function depends on the model you purchased.) Skips backwards to the previous track, chapter or digital file. Refer to Chapter 4, Operating Basics, for details. (The availability of this function depends on the model you purchased.) Skips forward to the next track, chapter or digital file. Refer to Chapter 4, Operating Basics, for details. (The availability of this function depends on the model you purchased.)

Previous Button*

Next Button*
If Random or Shuffle is selected in Windows Media Player, selecting Next or Previous advances to a random selection. Number Pad Press the Number Lock button to activate the number pad. Use the number pad instead of the number buttons on the keyboard to enter numbers and ASCII codes.
Finger Print Scanner* Use the fingerprint scanner to prevent unauthorised access to the laptop See Using the FingerPrint (FingerPrint sensor is provided with some models) on page 4-3. (The availability of this function depends on the model you purchased.) Web Camera* Take your picture or send your image to web contacts. (The availability of this function depends on the model you purchased.) The Microphone is used with the Web Camera to talk to other Web Camera users and to record messages on windows media. (The availability of this function depends on the model you purchased.)

Microphone*

Keyboard Indicators

CAPS LOCK

Numeric Mode
You can use the numeric pad for numeric input when the Numeric mode icon lights green. Refer to the Number pad section in Chapter 5, The Keyboard. The Caps Lock LED lights when you press the Caps Lock key. When this light is on, pressing a letter key on the keyboard produces an uppercase (capital) letter.

Caps Lock

Optical Disc drive
The computer will have a single layer or dual layer DVD Super Multi drive or HD DVD drive supporting R Double Layer depending on its configuration. An ATAPI interface controller is used for the operation of these optical drives. When the computer is accessing a disc, an indicator on the drive glows.

Points to note about the FingerPrint Utility software
You are able to backup saved FingerPrint data and information within the PasswordBank by using the import or Export User Data facility under the FingerPrint management software. However, please be aware that any encrypted files cannot be backup within FileSafe using this function - in these instances it is recommended that you backup these files to external media using standard file copy processes. The user should back up the user profile information when using the functions provided in this software to encrypt files or folders. If this software or the user information is deleted without backing up the user profile information, the encrypted files will no longer be accessible. In addition, if the backup data is not used, the user will not be identified as the same user even if the same name is used again in user enrolment. Please refer to the following procedures to back up. If Windows Vistas file encryption function EFS (Encryption File System) is used to encrypt a file, the file cannot be further encrypted using the encryption function of this software. In the help file, it is stated that this software's Password Bank function can be used for the Internet and general applications. However, the Internet Password Bank function in the FingerPrint utility provided in this computer can only be used with IE (Internet Explorer).

Set up Procedure

Please use the following procedure when first using FingerPrint authentication.

FingerPrint Registration

You should initially enroll the required authentication data using the User Enrollment Wizard. In use, the FingerPrint authentication system will use the same username and password as defined within Windows operating system. If no Windows password has been configured, you must do this before starting the FingerPrint registration process. Up to twenty-one FingerPrint patterns can be registered on this sensor. 1. Click Start followed by All Programs followed by Protector Suite QL and then click User Enrollment. You are also able to start the User Enrollment Wizard by using the following method. Click the Protector Suite QL icon in the Task Bar. Swipe your finger across the FingerPrint Sensor. 2. Click Next.
3. At the Users Password screen which is then displayed, you should ensure that the same Windows username is displayed before entering the appropriate password into the Enter you password field. Once this has been done, click Next. 4. At the Hints for FingerPrint Enrollment screen, confirm the message displayed and ensure that there is a check mark in the Run Interactive Tutorial box. Once this has been done, click Next. 5. At the Correct swipe Procedure screen, confirm the message that is diplayed and then click Next. 6. At the Scanning Practice screen, you are able to practice swiping your finger to ensure you use the correct method. Once you have finished practicing, click Next. 7. At the Users Fingers screen, select the finger you wish to enroll from the illustration and then click Next. On this screen please be aware that any previously enrolled FingerPrints would have green check marks, while the FingerPrint you are about to enroll will have a red check mark. If any of the previously enrolled FingerPrints is selected again, the latest information will be enrolled and any previous information over-written. 8. At Advanced Security screen, select whether you wish tto enable the security function, and then click Next. 9. At Finalization screen, click Finish - this will complete the FingerPrint registration process.

Release Notes related to the Bluetooth Stack for Windows by TOSHIBA
1. Fax application software: Regarding FAX application software, there are some software that you cannot use on this Bluetooth Stack. 2. Multi User: On Windows Vista, the use of Bluetooth is not supported in a multi-user environment. This means that, when you use Bluetooth, other users logged onto the same computer will not be able to use its Bluetooth functionality.

Product Support:

The latest information regarding Operating System support, Language Support or available upgrades can be found on our web site http:// www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or www.pcsupport.toshiba.com in the United States.

Wireless communications

It may not be possible to make a network connection to a specified network name using the ad hoc network function. If this occurs, the new network(*) will have to be configured for all computers connected to the same network in order to re-enable network connections. * Please be sure to use new network name.
Wireless communication switch
You can enable or disable the Wireless devices function with the on/off switch. No transmissions are sent or received when the switch is off. Slide the switch forward to turn it on and backward to turn it off. Turn the switch off in airplanes and hospitals. Check the LED, it stops glowing when the wireless communication function is off.
Wireless communication LED
The LED indicates the status of the wireless communication functions. LED status LED off LED glows Indication Wireless communication switch is set to off. Wireless communication switch is on.
Using optical disc drives
The illustrations in this section might differ slightly from your drive, but operation is the same for all optical disc drives. The full-size drive provides high-performance execution of disc-based programs. You can run either 12 cm (4.72") or 8 cm (3.15") discs without an adapter. An ATAPI interface controller is used for disc drive operation. When the computer is accessing a disc, an indicator on the drive illuminates. Use the DVD Video Player to view DVD-Video discs. If you have a DVD Super Multi drive or HD DVD drive refer also to the Writing CD/DVDs on DVD Super Multi drive or HD DVD drive section for precautions on writing to CDs.
Loading optical disc media
To load a disc, follow the steps below. 1. Turn on the power. 2. a. Press the eject button to open the drawer slightly.

EJECT BUTTON

Pressing the eject button
b. Pressing the eject button will not open the drawer when the computer's power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
Manual release with the eject hole 4-20 Satellite X200/Satellite Pro X200
3. Grasp the drawer gently and pull until it is fully open.

HD DVD is a new standard which makes use of new technologies. As such, there is a possibility of problems occurring related to connection, compatibility or operation with some discs and other digital devices. The HD DVD-ROM logo signifies that this drive complies with the HD DVD physical standard, and does not signify compliance with the HD DVD Video standard. This device does not support advanced features of the HD DVD Video standard as defined by the DVD Forum, including picturein-picture and network download features. Screen movement may not be smooth, and performance may be lowered with some HD DVD content. Playback of high bit rate content may cause frame dropping, audio skipping or decrease in computer performance. Viewing of HD DVD content on an external display requires an HDCP capable HDMITM or DVI input on the external display. Make sure to connect the computer's AC adaptor when playing an HD DVD. CPU power is concentrated on HD DVD playback when playing an HD DVD, so make sure to exit all other applications. Dolby Digital audio enhancements are only supported by Microsoft Windows operating system. Content with high sample rates of 48kHz or more are downsampled when output through either the built-in speakers or headphone jack. This device supports AACS (Advanced Access Content System) nextgeneration copy protection technology. Renewal of the AACS key integrated into this device is required for uninterrupted enjoyment of HD DVD. An Internet connection is required when renewing the key. For more information on AACS keys, visit the AACS website (www.aacsla.com/home).

HD DVD Media

Like CD and DVD, HD DVD is divided into the read-only and recordableformats listed below. Some media cannot be used with this product. Be sure to thoroughly read section DVD Super Multi drive, HD DVD-ROM drive" or "HD DVD-R drive" of chapter 2 before using this product. HD DVD-Video: For video playback. Used to store movies and other video. HD DVD-ROM: Read-only media. HD DVD-R: A recordable media which can be written to only once. HD DVD (Twin format disc): Has both HD DVD and DVD recordable layers.
Media Structures and Capacity
HD DVD Recordable Surface Single-sided Single-Layer Single-sided Dual-Layer Double-sided Single-Layer Double-sided Dual-Layer HD DVD (Twin format disc) Recordable Surface Single-sided Dual-Layer Recordable Layer Structure HD DVD Recordable Layer DVD Recordable Layer Capacity 15GB 4.7GB Recordable Layer Structure Capacity
HD DVD Recordable Layer Only 15GB HD DVD Recordable Layer Only 30GB HD DVD Recordable Layer Only 30GB HD DVD Recordable Layer Only 60GB

CD-RW: DVD-R:

DVD-RW:

DVD+R: DVD+RW: *DVD-RAM

DVD+R (Double Layer) DVD-R (Dual Layer)
DVD-R Labelflash DVD+R Labelflash
FUJIFILM Corporation FUJIFILM Corporation
If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur. Be careful to check the disc for dirt or damage before you use it. The actual number of rewrites to CD-RW or DVD-RW/+RW/-RAM is affected by the quality of the disc and the way it is used. There are two types of DVD-R: authoring and general use discs. Do not use authoring discs. Only general use discs can be written to by a computer drive. We can support only Format 1 of DVD-R DL. Therefore you can not do the additional writing. If your data is under DVD-R (SL) capacity, we suggest to use DVD-R (SL) media. You can use DVD-RAM discs that can be removed from a cartridge and DVD-RAM discs designed without a cartridge. You cannot use a disc with a 2.6 GB single-sided capacity or 5.2 GB double-sided capacity. Other DVD-ROM drives for computers or other DVD players may not be able to read DVD-R/+R/-RW/+RW/-RAM discs. Data written to a CD-R/DVD-R/+R disc cannot be deleted either in whole or in part. Data deleted (erased) from a CD-RW and DVD-RW/+RW/-RAM disc cannot be recovered. Check the content of the disc carefully before you delete it. If multiple drives that can write data to discs are connected, be careful not to delete data from the wrong drive. In writing to a DVD-R/+R/-RW/+RW disc, some disc space is required for file management, so you may not be able to write the full capacity of the disc. Since the disc is based on the DVD-R/-RW standard, it will be filled with dummy data if the written data is less than about 1 GB. Even if you write only a small amount of data, it might take time to fill in the dummy data. Two types of DVD-R/+R/-RW/+RW/-RAM discs are on the market: data and video. Use a video disc to store video data. You can use video discs on a DVD recorder as well as on your computer's DVD-ROM drive. You cannot use data discs on a DVD recorder. DVD-RAM formatted by FAT32 cannot be read in Windows 2000 without DVD-RAM Driver Software. When multiple drives that can write data to discs are connected, be careful not to write to the wrong drive. Be sure to connect the universal AC adapter before you write or rewrite. Before you enter Sleep/Hibernation Mode, be sure to finish DVD-RAM writing. Writing is finished if you can eject DVD-RAM media.

Blinking Amber No light

Battery types
The computer has two types of batteries: Battery pack Real Time Clock (RTC) battery

Battery pack

When the AC adapter is not connected, the computer's main power source is a removable lithium ion battery pack, also referred to in this manual as the battery. You can purchase additional battery packs for extended use of the computer away from an AC power source. The battery is a disposable item. When its operation becomes short even when fully charged, replace it with a new one. The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. Do not remove the battery pack while the computer is in Sleep Mode. In this mode data is stored in memory, so if the computer loses power, it will be lost. Battery type (depending on the model you purchased): 9 cell-PA3537U-1BRS,PA3537U-1BAS * The availability of this battery is dependent on the model you purchased.

Real Time Clock battery

The Real Time Clock (RTC) battery provides power for the internal real time clock and calendar. It also maintains the system configuration. If the RTC battery becomes completely discharged, the system loses this data and the real time clock and calendar stop working. The following message appears when you turn on the power:
ERROR 0271:Check date and time settings. WARNING 0251:System CMOS checksum bad - Default configuration used. Press <F1> to resume, <F2> to Setup.
The computer's RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations.
When this error appears, the following action is recommended. 1. Connect the AC adapter and let the battery charge for 24-hours. 2. Press F2 to enter BIOS setup menu. 3. Set correct time and date. If you still see the error message after performing the above actions, please contact your TOSHIBA service representative.
Care and use of the battery pack
The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Follow the instructions in this section carefully to ensure safe operation and maximum performance.

Monitoring battery capacity
Remaining battery power can be monitored using the following methods. Clicking the battery icon on the task bar Via the Battery Stats in the Windows Mobility Center Window You should wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time. This is because the computer needs this time to check the batterys remaining capacity and then calculate the remaining operating time, based on this together with the current power consumption. Please be aware that the actual remaining operation time may differ slightly from the calculated time. With repeated discharges and recharges, the battery's capacity will gradually decrease. In view of this it will be noted that an often used, older battery will not operate for as long as a new battery even when both are fully charged.
Maximizing battery operating time
A battery's usefulness depends on how long it can supply power on a single charge. How long the charge lasts in a battery depends on: How you configure the computer (for example, whether you enable battery power saving options). The computer provides a battery save mode to conserve battery power. This mode has the following options: Display auto off Hard Disk Drive auto off System auto off LCD brightness How often and how long you use the hard disk, optical media drive and the disk drive (if one is connected). How much charge the battery contained to begin with. Enabling Sleep Mode or Hibernation Mode conserves battery power if you are frequently turning the computer off and on. Where you store your programs and data. Closing the display when you are not using the keyboard saves power. Operating time decreases at low temperatures. The condition of the battery terminals. Make sure the battery terminals stay clean by wiping them with a clean dry cloth before installing the battery pack.
Retaining data with power off (sleep mode)
When you turn off your computer with fully charged batteries, the batteries retain data/charge for the following approximate time periods: Battery Approximately 1.5days(Sleep mode,9-cell) Approximately 1 month (Shut down mode, all type of battery packs) Approximately 1 month

HD DVD drive supporting disc recording Disk drive Real Time Clock Fingerprint Sensor HDMI Web Camera

System start-up

When the computer does not start properly, check the following items: Self Test Power Sources Power-on Password

Self test

When the computer starts up, the self test will be run automatically, and the following will be displayed:
(This screen image is one of the examples. You may see the different screen image depending on the model you purchased.)
This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system based around how the Boot Priority option is set within the computers BIOS setup. If any of the following conditions are present, the self test failed: The computer stops and does not proceed to display information or messages except the TOSHIBA logo. Random characters appear on the screen, and the system does not function normally. The screen displays an error message. Turn off the computer and check all cable connections as well as memory module connections. If the test fails again, contact your dealer.
When the computer is not plugged into an AC outlet, the battery pack is the primary power source. However, your computer has a number of other power resources, including an intelligent power supply and Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems. This section provides check lists for AC power and the battery. If you cannot resolve a problem after following them, the cause could lie with another power resource. In such cases you should contact your dealer.

Overheating power down

If the computers internal temperature becomes too high, the computer will automatically shut down

AC power

If you have trouble turning on the computer with the AC adapter connected, check the DC IN indicator. Refer to Chapter 7, Power and Power-Up Modes, for more information. Problem AC adapter doesn't power the computer (DC IN indicator does not glow red). Procedure Check the connections. Make sure the cord is firmly connected to the computer and a power outlet. Check the condition of the cord and terminals. If the cord is frayed or damaged, replace it. If the terminals are soiled, wipe them with cotton or a clean cloth. If the AC adapter still does not power the computer, contact your dealer.

Battery

If you suspect a problem with the battery, check the DC IN indicator as well as the indicators for the battery. For information on indicators and battery operation see Chapter 7, Power and Power-Up Modes. Problem Battery doesn't power the computer. Battery doesn't charge when the AC power cord is attached. (Battery indicator does not glow amber.) Procedure The battery may be discharged. Connect the AC power cord to charge the battery. If the battery is completely discharged, it will not begin charging at once. Wait a few minutes. If the battery still does not charge, make sure the outlet is supplying power. Plug in an appliance and see if it works. If it doesn't, try another power source. Check whether the battery is hot or cold. If the battery is too hot or too cold, it will not charge properly. Let it reach room temperature. Unplug the AC adapter and remove the battery to make sure the terminals are clean. If necessary wipe them with a soft dry cloth dipped in alcohol. Connect the AC adapter and replace the battery. Check the Battery indicator. If it does not glow, let the computer charge the battery for at least 20 minutes. If the Battery indicator glows after 20 minutes, let the battery continue to charge for at least another 20 minutes before turning on the computer. If the indicator still does not glow, the battery may be at the end of its operating life. Replace it. If you do not think the battery is at the end of its operating life, see your dealer.

Monitor does not turn on Make sure that the external monitor's power switch is on. Confirm that the external monitor's power cable is plugged into a working power outlet.

Problem No display

Procedure Try adjusting the contrast and brightness controls on the external monitor. Press hotkeys Fn + F5 to change the display priority and make sure it is not set for the internal display. Check that the cable connecting the external monitor to the computer is attached firmly. If problems persist, contact your dealer. Check your monitor specification. It might not support the selected resolution and refresh rate. The resolution on the monitor might go into panning mode when wide screen resolution is selected. Refer to Appendix B, Display Modes.

Display error occurs

Monitor goes into panning mode

Sound system

Problem No sound is heard Procedure Adjust the volume control dial. Check the software volume settings. If appropriate, make sure the headphone connection is secure. Check Windows Device Manager and ensure the sound function is enabled and that settings for I/O address, interrupt level and DMA are correct for your software and do not conflict with other hardware devices that you have connected to the computer. If problems persist, contact your dealer.

Pointing device

If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation.
On-screen pointer does The system might be busy. If the pointer is shaped not respond to Pad as an hourglass, wait for it to resume its normal operation shape and try again to move it. You may also press Fn + F9 to enable the TouchPad/Dual Mode Pad and then try again to move it.
Problem Double-tapping does not work
Procedure Try changing the double-click speed setting in the mouse control utility. 1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Buttons tab. 3. Set the double-click speed as instructed and click OK. Try changing the speed setting in the mouse control utility. 1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Pointer Options tab. 3. Set the speed as instructed and click OK. If problems persist, contact your dealer.
The mouse pointer moves too fast or too slow

USB mouse

On-screen pointer does The system might be busy. If the pointer is shaped not respond to mouse as an hourglass, wait for it to resume its normal shape and try again to move it. movement Make sure the mouse is properly connected to the USB port. Double-clicking does not work Try changing the double-click speed setting in the mouse control utility. 1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Buttons tab. 3. Set the double-click speed as instructed and click OK. Try changing the speed setting in the mouse control utility. 1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Pointer Options tab. 3. Set the speed as instructed and click OK. The mouse might be dirty. Refer to your mouse documentations for instructions on cleaning. If problems persist, contact your dealer.

Some programs run The software or hardware configuration may be correctly, but others do causing a problem. Make sure the hardware not configuration match's your software's needs. You cannot access the Try another disk. If you can access this disk, the disk drive original disk (not the disk drive) is problem. If problems persist, contact your dealer.

Real Time Clock

Problem The following message is displayed on the LCD: RTC battery is low or CMOS checksum is inconsistent. Press [F2] key to set Date/ Time. Procedure The RTC battery charge has become exhausted, you should set the date and time in within the BIOS setup screen through the following steps: 1. Press [F1] key. BIOS setup will boot up. 2. Press [F2] to set the date in [System Date]. 3. Press [F2] to set the time in [System Time].

Fingerprint Sensor

Problem Reading of the fingerprint was not successful. Procedure Please try again using the correct posture. Refer to Using the Fingerprint Sensor in Chapter 4, Operating Basics. Try the recognition process again using another enrolled finger.
The fingerprint cannot Try the recognition process again using another be read due to injuries to enrolled finger. the finger. If fingerprints from all the enrolled fingers cannot be read, please logon by using the keyboard to input the password for the time being. If problems persist, contact your dealer. Please use TOSHIBA Password Utility to register Fingerprint Power on Security or Single Sign the User Password if it was not registered. On feature cannot be enabled. 1. Make sure you have enroll finger in windows Fingerprint Power on account. Security does not work 2. Set the User Password by using TOSHIBA Password Utility and restart the system. 3. Make sure place a checkmark in Replace the power-on and hard drive passwords with the fingerprint reader on the Protector Suite QL setting.

Web Camera

Problem Cannot use the Web Camera Procedure Refer to Chapter 4, Using the Web Camera.

TOSHIBA support

If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance.

Before you call

Universal Serial Bus: This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.
VGA: Video Graphics Array is an industry standard video adaptor that lets you run any popular software.
warm start: Restarting or resetting a computer without turning it off. write protection: A method for protecting a floppy disk from accidental erasure.

Glossary-8

Toshiba Personal Computer Satellite X200/ X205 Maintenance Manual

TOSHIBA CORPORATION

[CONFIDENTIAL]
Copyright 2007 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the information contained herein. Toshiba Personal Computer Satellite X200/ X205 Maintenance Manual First edition Mar. 2007 Disclaimer The information presented in this manual has been reviewed and validated for accuracy. The included set of instructions and descriptions are accurate for the M100 Series at the time of this manual's production. However, succeeding computers and manuals are subject to change without notice. Therefore, Toshiba assumes no liability for damages incurred directly or indirectly from errors, omissions, or discrepancies between any succeeding product and this manual. Trademarks IBM is a registered trademark, and OS/2 and PS/2 are trademarks of IBM Corporation. Microsoft, MS-DOS, Windows, DirectSound and DirectMusic are registered trademarks of Microsoft Corporation. Intel and Pentium are registered trademarks, and SpeedStep is a trademark of Intel Corporation. Sound Blaster is a registered trademark of Creative Technology Ltd. Centronics is a registered trademark of Centronics Data Computer Corporation. Photo CD is a trademark of Eastman Kodak. All other properties are trademarks or registered trademarks of their respective holders.
Satellite X200 Series Maintenance Manual

Preface

This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite X200/ X205, referred to as the M100 Series in this manual. The procedures described in this manual are intended to help service technicians isolate faulty Field Replaceable Units (FRUs) and replace them in the field. SAFETY PRECAUTIONS Four types of messages are used in this manual to bring important information to your attention. Each of these messages will be italicized and identified as shown below. DANGER: Danger indicates the existence of a hazard that could result in death or serious bodily injury if the safety instruction is not observed. WARNING: Warning indicates the existence of a hazard that could result in bodily injury if the safety instruction is not observed. CAUTION: Caution indicates the existence of a hazard that could result in property damage if the safety instruction is not observed. NOTE: Note contains general information that relates to your safe maintenance service. Improper repair of the computer may result in safety hazards. Toshiba requires service technicians and authorized dealers or service providers to ensure the following safety precautions are adhered to strictly. Be sure to fasten screws securely with the right screwdriver. If a screw is not fully fastened, it could come loose, creating a danger of a short circuit, which could cause overheating, smoke or fire. If you replace the battery pack or RTC battery, be sure to use only the same model battery or an equivalent battery recommended by Toshiba. Installation of the wrong battery can cause the battery to explode.
The manual is divided into the following parts: Chapter 1 Chapter 2 Chapter 3 Chapter 4 Appendices Hardware Overview describes the M100 Series system unit and each FRU. Troubleshooting Procedures explains how to diagnose and resolve FRU problems. Test and Diagnostics describes how to perform test and diagnostic operations for maintenance service. Replacement Procedures describes the removal and replacement of the FRUs. The appendices describe the following: Handling the LCD module Board layout Pin assignments Keyboard scan/character codes Key layout Screw torque list Reliability
Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures. Acronyms On the first appearance and whenever necessary for clarification, acronyms are enclosed in parentheses following their definition. For example: Read Only Memory (ROM) Keys Keys are used in the text to describe many operations. The key top symbol as it appears on the keyboard is printed in boldface type.
Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus (+) sign. For example, Ctrl + Pause (Break) means you must hold down Ctrl and at the same time press Pause (Break). If three keys are used, hold down the first two and at the same time press the third. User input Text that you are instructed to type in is shown in the boldface type below: DISKCOPY A: B: The display Text generated by the computer that appears on its display is presented in the typeface below:

Format complete System transferred

Table of Contents

Chapter 1 1.1 1.2 1.3 1.4 1.5 Hardware Overview Features....1-1 System Unit.....1-5 2.5-inch Hard Disk Drive....1-6 DVD Super Multi Double Layer...1-8 HD DVD Drive....1-9
1.5.1 HD DVD-ROM..1-9 1.5.2 HD DVD-R.1-10 1.6 1.7 1.7.1 Power Supply 1-11 Batteries....1-13 Main Battery.1-14 1.7.2.RTC battery.1-15 Chapter 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 2.12 2.13 2.14 Troubleshooting Procedures
Troubleshooting Introduction...2-3 Troubleshooting Flowchart...2-4 Power Supply Troubleshooting...2-9 Display Troubleshooting...2-14 Keyboard Troubleshooting...2-17 External USB Devices Troubleshooting..2-19 TV-Out Failure Troubleshooting...2-21 TouchPad Troubleshooting....2-23 Speaker Troubleshooting...2-25 Optical drive troubleshooting.2-27 Modem Troubleshooting...2-30 Express card Troubleshooting...2-32 IEEE 1394 Troubleshooting...2-34 Wireless LAN Troubleshooting...2-36

2.15 2.16 2.17

Camera troubleshooting.2-38 Bluetooth Troubleshooting..2-in 1 card Troubleshooting.2-42 HDD Troubleshooting..2-44 CRT failure Troubleshooting..2-46 HDMI Troubleshooting..2-48 Robson Troubleshooting.2-50 MIC Troubleshooting..2-52 Finger Troubleshooting.2-54
Chapter 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 3.20 3.21

Tests and Diagnostics

The Diagnostic Test....3-3 Executing the Diagnostic Test...3-4 Display Configuration....3-8 Speaker Audio Test....3-9 Fan ON/OFF Test....3-10 Main Battery Charge Test....3-11 FDD Test....3-12 ODD Test....3-13 Keyboard Test.....3-14 Mouse (Pad) Test...3-15 LCD Pixels Mode Test....3-18 Magnetic switch Test....3-19 LAN Test....3-20 RTC Test.... 3-23 Read 1394 GUID.... 3-24 Speaker EQ Check.3-25 Button Test.3-26 Fingerprint DOS Test.3-27 Clear Fingerprint Registered.3-29 1st HDD Test....3-30 2nd HDD Test.3-33

3.22 3.23 3.24

Front Edge Logo check.3-36 Write DMI.3-37 Read DMI.3-39
Chapter 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 4.19 4.20 4.21 4.22 4.23

LCD auto-dim mode by time out Switches Power button Two programmable launch buttons Four control buttons for CD playing Wireless communication switch
Media Play Switch Security Fingerprint authentication AC Adapter Universal AC adapter module
Delta 180W adapters Output voltage: 19Vdc
Input Voltage/Frequency range: 90-264Vac, 47-63Hz Display 17 (16:10) TFT screen with a resolution of 1440 horizontal x 900 vertical pixels, CSV VA, high brightness approximately 200nits, WXGA+
17 (16:10) TFT screen with a resolution of 1680 horizontal x 1050 vertical pixels, CSV, brightness approx 150nits, WSXGA+ Multiple digital media card slot Supports xD, SD, miniSD, MS, MS Pro, and MMC Universal Serial Bus (USB) The computer has three Universal Serial Bus (USB) ports that comply with the USB 2.0 standard, which enable data transfer speeds more than 40 times faster than USB 1.1 (which this computer also supports.) The USB drives may be used to transfer data at Low, Full, and high speeds. Bluetooth module Some computers in this series are equipped with Bluetooth functionality (Version 2.0 + EDR) with antenna. Bluetooth is a short-range wireless technology used to create PANs (Personal Area Networks) among your devices, and with other nearby devices like mobile computers, mobile phones, and digital cameras. OS Windows Vista Home Basic/ Home Premium (32/64 bit support) Windows Vista Business (32/64 support) Vista Premium Logo

1.2 System Unit

System Unit
The system unit is composed of the following major components: Processor (depending on the model you purchased) Intel CoreTM 2 Duo Processor T7800/T7700/T7500/T7300 /T7250 /T7100/T5450 Intel Celeron Processor 550/540/530/520
System logic Mobile Intel PM965 with ICH8M Chipset Memory Two DDR-II 533/667MHz SO-DIMM Supports Dual channel Up to 4GB with 2GB module for Intel PM965 Chipset
Video RAM (Depending on the model you purchased) GDDR3 for nVidia NB8E-SE VRAM 256M or 512M(16Mx32)
Audio subsystem Realtek High Definition Audio Codec ALC268 Microphone-in ,Line-In and headphone-out Volume control: Digital control, rotary type, without mute function Supports Microsoft Outlook Express audio S/PDIF Out

Detection of the low battery The EC detects the low battery point by the gas gauge. LB10M: The system will be driven by the battery for 12 more minutes. LB0: The battery won't be able to drive the system after 3 minutes. LB1: The battery can drive the system only during the suspend process. LB2: The battery cannot drive the system.
New battery installation When a new battery is installed, the EC communicates with the E2PROM in the battery to read information of the newly installed battery.
Battery capacity calculation The EC reads battery remaining and percentage capacity from the battery through SMBus.

1.6 Batteries

Batteries
The computer has two types of battery: Main battery pack (18650 size) RTC battery The removable main battery pack is the computers main power source when the AC adaptor is not attached. The battery specifications are listed in the table below.
Battery name Main battery (9 cells) RTC battery (Maxell ML1220T10) RTC battery (Maxell ML1220HT10) RTC battery (Sanyo ML1220T28) RTC battery (Panasonic ML1220/B)
Material Lithium-Ion Lithium-Ion Lithium-Ion Lithium-Ion Lithium-Ion
Output voltage 10.8V 3.0V 3.0V 3.0V 3.0V
Capacity 6000mAH 14 mAH 18 mAH 15 mAH 17 mAh

Table 1-5

Battery specifications
1.7.1 Main Battery Battery charging is controlled by a power supply microprocessor that is mounted on the system board. The power supply microprocessor controls whether the charge is on or off and detects a full charge when the AC adaptor and battery are attached to the computer. The system charges the battery using quick charge or trickle charge. Quick battery charge When the AC adaptor is attached, there are two types of quick charge: quick charge when the system is powered off and normal charge when the system is powered on. The times required for charges are listed in the table below.
Status Normal charge (power on) Quick charge (power off) Charging time 12 hours or longer About 4 hours or longer
NOTES 1. The time required for normal charge is affected by the amount of power the system is consuming. Use of the fluorescent lamp and frequent disk access diverts power and lengthens the charge time. Using quick charge, the power supply microprocessor automatically stops the charge after eight hours regardless of the condition of the battery. Overcharging could cause the battery to explode. If any of the following occurs, the battery quick charge process stops. 1. The battery becomes fully charged. 2. The AC adaptor or battery is removed. 3. The battery or output voltage is abnormal. 4. The battery temperature is abnormal. 5. The battery SMBus communication fails. 6. The battery cell is bad. Detection of full charge A full charge is detected from the battery pack through SMBus when the battery is charging.

1.7.2 RTC battery The RTC battery provides power to keep the current date, time and other setup information in memory while the computer is turned off. The table below lists the charging time and data preservation period of the RTC battery. The RTC battery is charged by the adaptor or main battery, while the computer is powered on.
Status Charging Time (power on) Data preservation period (full charge)
Time About 24 hours 1 month
Chapter 2 Troubleshooting Procedures
2 Troubleshooting Procedures

Chapter 2

2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 2.20 2.21 2.22 2.23
Troubleshooting Introduction...3 Troubleshooting Flowchart....4 Power Supply Troubleshooting...9 Display Troubleshooting....14 Keyboard Troubleshooting...17 External USB Devices Troubleshooting...19 TV-Out Failure Troubleshooting...21 TouchPad Troubleshooting...23 Speaker Troubleshooting...25 Optical drive troubleshooting...27 Modem Troubleshooting.30 Express card Troubleshooting...32 IEEE 1394 Troubleshooting...34 Wireless LAN Troubleshooting...36 Camera troubleshooting....38 Bluetooth Troubleshooting. in 1 card Troubleshooting.42 HDD Troubleshooting.44 CRT failure Troubleshooting. 46 HDMI Troubleshooting.48 Robson Troubleshooting. 50 MIC Troubleshooting. 52 Finger Troubleshooting. 54
Satellite x200/x205/satellite Pro x200 / EQUIUM X200 /SATEGO X200 Series Maintenance Manual
Figures Figure 2-1 Figure 2-1 Figure 2-2 Figure 2-3 Figure 2-4 Figure 2-5 Figure 2-6 Figure 2-7 Figure 2-8 Figure 2-9 Figure 2-10 Figure 2-11 Figure 2-12 Figure 2-13 Figure 2-14 Figure 2-15 Figure 2-16 Figure 2-17 Figure 2-18 Figure 2-19 Figure 2-20 Figure 2-21 Figure 2-22 Troubleshooting flowchart (1/2)... 5 Troubleshooting flowchart (2/2)... 6 Power Supply Troubleshooting Process.. 9 Display troubleshooting process... 14 Keyboard troubleshooting process... 17 External USB device troubleshooting process.. 19 TV-out troubleshooting process... 21 TouchPad troubleshooting process... 23 Speaker troubleshooting process... 25 Optical drive troubleshooting process... 27 Modem troubleshooting process... 30 Express card troubleshooting process... 32 IEEE 1394 troubleshooting process... 34 Wireless LAN troubleshooting process... 36 Camera troubleshooting process... 38 Bluetooth troubleshooting process.in 1 card troubleshooting process.42 HDD troubleshooting process.44 CRT failure troubleshooting process.46 HDMI Troubleshooting process.48 Robson troubleshooting process.50 MIC troubleshooting process.52 Finger printer troubleshooting process 54
Tables Table 2-1 Table 2-2 Battery LED... 10 DC-IN LED.... 11
Troubleshooting Introduction
Chapter 2 describes how to determine if a Field Replaceable Unit (FRU) in the computer is causing the computer to malfunction. The FRUs covered are: 1. Display 2. USB Floppy Drive 3. Keyboard 4. USB ports 5. TV-out port 6. TouchPad 7. Speaker 8. Optical drive 9. Modem 10. Express card unit 11. IEEE 1394 port 12. Wireless LAN system 13. Camera 14. Bluetooth 15 HDMI 16. Robson card 17. MIC 18. Finger

Is th e "T o sh ib a " lo g o m e ssa g e d isp la y ?
If th e "p a ssw o rd " m e ssa g e d isp la y s, ty p e th e p a ssw o rd , th e n p re ss E n te r. P e rfo rm d ia g n o stic s p ro g ra m. R u n C M 5.E X E a n d se le c t th e H A R D D IS K ite m.
Is T o sh ib a W in d o w s b e in g lo a d e d ?
Figure 2-1 Troubleshooting flowchart (1/2)
Perform the Keyboard Troubleshooting procedures in section 2.6
Does typed characters appear correctly?
Insert the diagnostics disk into the FDD. Then run the diagnostics test program.
Is the diagnostics test loaded?
Perform the FDD Troubleshooting procedures in section 2.5
Allow each test to perform automatically
Is an error detected by any of the diagnostics tests?
After confirming which diagnostics test has detected an error, perform the appropriate procedure as outlined below.

System is normal

Figure 2-1 Troubleshooting flowchart (2/2)
If the diagnostics program cannot detect an error, the problem may be intermittent. The test program should be executed several times to isolate the problem. When a problem has been located, perform the appropriate troubleshooting procedures as follows: 1. If an error is detected by the battery test, perform the Power Supply Troubleshooting procedures in Section 2.3. 2. If an error is detected by the display test, perform the Display Troubleshooting procedures in Section 2.4. 3. If an error is detected by the keyboard test, perform the Keyboard Troubleshooting procedures in Section 2.5. 4. If an error is detected by the TouchPad test, perform the TouchPad Troubleshooting procedures in Section 2.8. 5. If an error is detected by the audio test, perform the Speaker Troubleshooting procedures in Section 2.9 and the Optical Drive Troubleshooting Procedures in Section 2.10. 6. If an error is detected by the modem test, perform the Modem Troubleshooting Procedures in Section 2.11.
Other problems that are not covered by the diagnostics program may be discovered by a user. 1. If an error is detected when using an external USB device, perform the External USB Devices Troubleshooting procedures in Section 2.6. 2. If an error is detected when using the TV-out connection, perform the TV-Out Failure Troubleshooting procedures in Section 2.7. 3. If an error is detected when using the speakers, perform the Speaker Troubleshooting procedures in Section 2.10. 4. If an error is detected when using the modem, perform the Modem Troubleshooting procedures in Section 2.11. 5. If an error is detected when using the EXPRESS CARD unit, perform the EXPRESS CARD Troubleshooting procedures in Section 2.12. 6. If an error is detected when using the IEEE1394 device, perform the IEEE1394 device Troubleshooting procedures in Section 2.13. 7. If an error is detected when using the Wireless LAN, perform the Wireless LAN Troubleshooting procedures in Section 2.14.

2.6 External USB Devices Troubleshooting
P e rfo rm e x te rn a l d e v ic e a n d c o n n e c tio n c h e c k (P ro c ed u re 1 )
C heck U SB p o rt c o n n e c tio n
D o e s th e d e v ic e fu n c tio n w h e n c o n n e c te d to a d iffe re n t U S B p o r t?
D o e s a n a lte rn a tiv e U S B d e v ic e f u n c tio n c o r r e c tly ?
O r ig in a l U S B d e v ic e is fa u lty
No R e p la c e s y s te m b o a r d (P ro c ed u re 2 )
Figure 2-5 External USB device troubleshooting process
To determine if the computers external USB devices are functioning properly, perform the following procedures. Figure 2-6 outlines the process. Start with Procedure 1 and continue as instructed. Procedure 1: External device and connection check Procedure 2: Replace system board Procedure 1 External device and connection check
The USB device may be damaged or the connection may be faulty. Perform Check 1. Check 1 Check 2 Make sure USB device cable is firmly plugged into one of the USB sockets. If the cable is connected correctly, go to Check 2. Plug the USB device into another USB socket (there are three in all). If the USB device still does not work, go to Check 4. If the device functions correctly when connected to another USB port, go to Check 3. Check 3 Make sure that the USB socket is firmly secured to the system board of the computer. If the malfunction remains, the system board may be damaged. Go to Procedure 2. Connect an alternative USB device to one of the computers USB ports, and then boot the computer. The computer automatically detects the external device. If the alternative USB device works correctly, the original device may be damaged and should be replaced. If the alternative USB device appears to have the same problem as the original device, the system board may be damaged. Go to Procedure 2. Procedure 2 Replace system board
If the error persists, the system board may be damaged. Replace it with a new one following the instructions in Chapter 4.
TV-Out Failure Troubleshooting
P e r fo rm T V c o n n e c tio n c h e c k (P ro c e d u re 1 )
D o e s re p la c e m e n t T V c a b le f u n c tio n p r o p e rly ?
R e p la c e T V c a b le
P e rf o r m T V s e t c h e c k (P ro c e d u re 2 )
T V f u n c tio n in g o k ?
U s e d iff e r e n t T V set
Figure 2-6 TV-out troubleshooting process
To determine if the computers TV-out port is functioning properly, perform the following procedures. Figure 2-7 outlines the process. Start with Procedure 1 and continue as instructed. Procedure 1: TV connection check Procedure 2: TV set check Procedure 1 TV connection check

To determine if the computers built-in speakers are functioning properly, perform the following procedures. Figure 2-10 outlines the process. First adjust the speaker volume to an appropriate level. Start with Procedure 1 and continue as instructed. Procedure 1: Audio source test Procedure 2: Earphone test Procedure 3: Connection check Procedure 4: Replacement check Procedure 1 Audio source test
Try different audio sources (e.g. an audio CD and digital music file) to determine whether the fault is in the speaker system or not. If not all sources have sound problem, the problem is in the source devices. If all have the same problem, continue with Procedure 2. Procedure 2 Earphone test
Connect a set if earphones or external speakers. If these function correctly, go to Procedure 3. If they do not function correctly, the system board may be defective or damaged. Replace it with a new one. Procedure 3 Connection check
Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and make sure the speaker cable is firmly connected to the audio board. If the stereo speakers are still not functioning properly, go to Procedure 4. Procedure 4 Replacement check
If the stereo speakers don't sound properly, the stereo speakers may be defective or damaged. Replace them with new ones. If the stereo speakers still do not work properly, try replacing in turn the audio board and system board.
2.10 Optical Drive Troubleshooting
Perform audio CD check (Procedure 1)

Audio CD functions ok?

Perform drivecleaning check (Procedure 2)
Perform software check (Procedure 3)
Perform diagnostic test (Procedure 4)
Perform connection and replacement check (Procedure 5)
Figure 2-9 Optical drive troubleshooting process
This section describes how to determine if the computers internal optical drive is functioning properly. The Satellite X200 / X205 / Satellite Pro X200 / EQUIUM X200 /SATEGO X200 Series Maintenance Manual module bays can accommodate the following optical drives: DVD SuperMulti supporting +-R Double Rayer Figure 2-11 outlines the process. Perform the steps below starting with Procedure 1 and continue with the other procedures as required.
Procedure 1: Audio CD test Procedure 2: Drive cleaning check Procedure 3: Software check Procedure 4: Diagnostic test Procedure 5: Connection and replacement check Procedure 1 Audio CD check
First, insert an audio CD into the CD/DVD drive. If it works, the problem is not with the drive. Go to Procedure 3. If the audio CD does not work, go to Procedure 2. If the CD/DVD LED on the front panel does not light when the disc is played and the drive gives no response, go straight to Procedure 3. Procedure 2 Drive cleaning check
Insert a CD/DVD drive-cleaning disk into the drive clean according to the drive-cleaning product instructions. If the problem persists, go to Procedure 3. Procedure 3 Software check

Ensure that the appropriate driver has been installed on the computer for the CD/DVD drive. Procedure 4 Diagnostic test
The audio test program stored in the Diagnostics Disk will test the drives ability to play an audio CD. See Chapter 3 for details. If any errors occur while executing the diagnostic program, go to Procedure 5.

Procedure 5

Connection check and replacement check
The optical drive connects to the system board. The drive may be disconnected, or the drive or system board may be damaged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures, and perform the following checks:

Check 1 Check 2

Make sure the drive is firmly connected to the system board. If the connection is good and there is still an error, go to Check 2. The drive or drive cable may be defective or damaged. Replace each with a new one following the steps in Chapter 4, Replacement Procedures. If the drive is still not functioning properly, perform Check 3. The system board may be damaged. Replace it with new one following the instructions in Chapter 4, Replacement Procedures.
Troubleshooting Procedures
2.11 Modem Troubleshooting
Perform telephone line connection check (Procedure 1)
Computer unable to detect telephone signal?
Check / replace telephone line and connections
Perform connection check (Procedure 2)
Perform replacement check (Procedure 3)
Figure 2-10 Modem troubleshooting process
This section describes how to determine if the computer's modem is functioning properly. Figure 2-12 outlines the process. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required.
Procedure 1: Telephone line connection check Procedure 2: Modem card connection check Procedure 3: Modem card replacement check Procedure 1 Telephone line connection check
The telephone cable may be damaged or the connections may be loose. Attempt to connect the computer to a network through using the modem. If the modem does not function at all, go to Procedure 3. If the attempt fails because the computer detects no telephone signal, the fault may be in the telephone cable, the wall socket or the modem port. Perform Check 1:

Check 1

Make sure telephone cable is firmly plugged into both the telephone wall socket and the modem port of the computer. If the cable is connected correctly, go to Check 2. Make sure the modem port is firmly secured to the system board of the computer. If the malfunction remains, go to Check 3. The telephone cable may be damaged. Replace with a good cable. If the malfunction remains, go to Procedure 2. Modem card connection check

Check 2 Check 3

Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and ensure that the modem card is well connected to the system board. If the problem persists, perform Procedure 3. Procedure 3 Modem replacement check

Make sure that the wireless LAN antenna is firmly connected to the wireless LAN unit (refer to Chapter 4 for instructions) and that the wireless LAN unit is securely slotted into the system board. If the problem persists, go to Check 2. Check that the wireless communication switch is turned to On, and then make sure that the wireless communication LED on the front panel is lit. If the LED is lit but the wireless LAN function is still faulty, the antenna may be damaged. Replace with a new antenna following the steps in Chapter 4, Replacement Procedures. If the problem persists, or if the wireless LAN LED is not lit when the wireless communication switch is turned to On, go to Check 3. The wireless LAN unit may be damaged. Replace it with a new one following the instructions in Chapter 4. If the problem still exists, perform Check 4. The system board may be damaged. Replace it with a new one following the instructions in Chapter 4.

Check 3 Check 4

2.15 Camera Troubleshooting
Figure 2-14 Camera troubleshooting process
The Camera board or system board may be the reason of a Camera fault. Either of these two components may be damaged. To determine if the computers Camera is functioning
properly, perform the following procedures. Figure 2-14 outlines the process. Start with Procedure 1 and continue with the other procedures as instructed. Procedure 1: Diagnostic test Procedure 2: Connector and replacement check Procedure 1 Diagnostic test
Run the functioning Program in windows, which will display the Camera test result. If tests and diagnostics result abnormal go to Procedure 2. If an error is not located, the Camera system is functioning properly.
The Camera board or system board may be disconnected or damaged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures, and perform the following checks.

Check 1 Check 2 Check 3

Make sure that the Camera board FFC is securely slotted into the system board. If the problem persists, go to Check 2. The Camera board may be damaged. Replace it with a new one following the instructions in Chapter 4. If the problem still exists, perform Check 3. The system board may be damaged. Replace it with a new one following the instructions in Chapter 4.
2.16 Bluetooth Troubleshooting

S TART

P form dia re gnos te t tic s (P dure 1) roce

NOTE: The Touch Pad test cannot be used to test an external USB mouse. The Touch Pad button subtest allows users to test their Touch Pad buttons. If the buttons are clicked, the cursors should appear in the corresponding box of the button figure that is displayed on the screen as below.
3. Tests and Diagnostics After checking T/Pad buttons and cursors function, use Tab key or use T/Pad cursor to click the OK column will end this test. It will indicate whether the subtests pass or fail after three questions. NOTE: The above figure has three compartments although the Touch Pad installed may only have two buttons. In this case, the central compartment in the figure does not correspond to any button.
3.12 LCD Pixels Mode Test
3. 11 LCD Pixels Mode Test
This LCD pixels mode test checks whether video display is fine. This test includes two modes of the test: 1. Text Mode - including 40*25 (16 colors) and 80*25 (2/16colors). 2. VGA Mode - including 320*200 (4/16/256 colors), 640*200 (2/16 colors), 640*350 (2/16 colors), 640*480 (2/16/256 colors), 800*600 (256 colors) and 1024*768 (256 colors). The screen should display as below, indicating whether the test is passed or failed after the question.
3.13 Magnetic Switch Test
3.12 Magnetic Switch Test
The lid switch test checks the lid function of the unit. When LCD cover closed, the lid should enable to turn off the display. Follow below steps to run this test: 1. Close the LCD cover. 2. open the LCD cover, if the lid switch test fail, it will stop below display:
3. If the Lid switch tests pass, it will show below display:

3.13 LAN Test

The LAN test checks the LAN full-duplex environment. NOTE: LAN loopback needs to plug in before test begins.
And LAN information will show on the test screen: IO Base Port: A000H IRQ BH, its IRQ 10. Node it is MAC Address. Line Frame 1514 Bytes. Line Speed 100Mbps or 10 Mbps. Bus ID its 4. The LAN test includes three subtests of the: 1. Speed1000 2. Speed100 3. Speed10 The subtests run automatically.

3.14 RTC Test

Checks the computers RTC (Real Time Clock) and calendar functions by comparing the DOS and CMOS values. The test runs automatically. The screen should display as below, indicating whether the test is passed or failed when finished.

3.15 Read 1394 GUID

This test will check if the computers EEPROM 1394GUID code is correct. NOTE: Must open the RAM Door to see RAM connector GUID bar code before test item begins.
The figure below will be displayed:
3.16 Speaker EQ Type Check&Re-Write
This test will check if the computers EEPROM EQ type is correct. The EQ Type test includes two subtests of the: 1. Check EQ Type from EEPROM 2. Re-Write EQ Type to EEPROM NOTE: To execute this test, you must select speaker type (Harman or No brand) and Harman speaker number (2speaker or 3speaker or 5speaker).

Figure 4-28 5.

Removing the keyboard screws
Slide the keyboard forward to lift it out, revealing the keyboard cable underneath. Disconnect the keyboard cable and remove the keyboard.

Figure 4-29

Disconnecting the keyboard cable
Installing the Keyboard To install the keyboard, follow the steps below and refer to the figures in the preceding section. 1. 2. 3. Connect the keyboard cable to the system board. Set the keyboard in place and secure it with four black M2x4 screws. Set the keyboard cover in place and press down to secure the keyboard cover until the latches engage.

4.11 Display Assembly

Removing the Display Assembly To remove the display assembly, first remove the battery, keyboard, and any optional devices. Then follow the steps below: 1. Disconnect the LVDS cable, function button board cable, wireless LAN antennas, CMOS cable, and microphone cable from the system board.

Figure 4-30

Disconnecting cables
Remove the strip cover from the computer chassis.

Figure 4-31 3.

Removing the strip cover
Remove two M2.5x8 black screws securing the LCD assembly from the rear side.

Figure 4-32

Removing the rear screws
Remove two M2.5x8 screws securing the LCD assembly to the top cover.
Figure 4-33 5. Remove the LCD assembly.
Removing the front screws

Figure 4-34

Removing the display assembly
Installing the Display Assembly To install the display assembly, follow the steps below and refer to the figures in the preceding section. 1. 2. 3. 4. 5. Seat the display assembly, taking care not to crush to the LVDS cable or wireless LAN antenna connectors. Secure two M2.5x8 black screws to each hinge to connect the assembly on the top cover. Secure two M2.5x8 black screws to the computers rear side. They hold the display assembly in place. Replace the strip cover. Connect the LVDS cable, function button board cable, wireless LAN antennas, CMOS cable, and microphone cable to their respective sockets on the system board.
4.12 Function Button Board
Removing the Function Button Board The function button board is located on the back side of the strip cover. First remove the button panel from the top chassis as described in the previous section. Then follow the steps below: 1. Turn the strip cover over. 2. Remove the M2.5x4 screw securing the function button board to the panel.

Figure 4-35

Removing the function button board screw
3. Slide out the function button board in direction of the arrow.

Figure 4-36

Sliding out the function button board
4. Lift the function button board up.

Figure 4-37

Removing the function button board

E0 2A E0 4D E0 CD E0 E0 2A E0 5B E0 DB E0 E0 2A E0 5D E0 DD E0
Table D-4 Scan codes with Fn key
Cap No. Keytop ENT L-CTRL L-ALT ARROW NUMERIC Scrl E0 E0 ECode set 1 Make 1C 1D 38 E0 E0 E0 Break 9C 9D B8 C5 C5 C6 E0 E0 E77 7E Make 5A E0 E0 E0 F0 F0 F0 Code set 2 Break F0 F0 F77 7E 5A 14 11
Table D-5 No.124 key scan code
Key top Prt Sc Shift Make Common Ctrl + Shift + Alt + E0 2A E0 E0 E37 E0 Code set 1 Break B7 E0 E0 D4 E0 B7 B7 AA E0 Make 12 E0 E0 E0 7C 7C 84 7C E0 F0 E0 E0 F0 Code set 2 Break 7C F0 FE0 7C 7C F0 12
Table D-7 No.126 key scan code
Key top Shift Code set 1 Make Pause Common Ctrl E1 E0 1D E0 E1 C6 9D C5 E1 E7E 77 E0 Code set 2 Make E1 F0 F0 7E 14 F0 77
*: This key generates only make codes.
United Status (US) Keyboard
2. Traditional Chinese (CH) Keyboard

3. Thai (TI) Keyboard

4. Korean (KO) Keyboard
5. United Kingdom (UK) Keyboard
6. US International (UI) Keyboard

7. Hebrew (HB) Keyboard

8. Danish (DM) Keyboard

9. Swiss (SW) Keyboard

10. Arabic (ARE) Keyboard

11. Czech (CZ) Keyboard

12. Russian (RU) Keyboard
13. Portuguese (PO) Keyboard
14. Slovakian (SL) Keyboard
15. Italian (IT) Keyboard

16. French (FR) Keyboard

17. German (GR) Keyboard

18. Greek (GK) Keyboard

19. Hungarian (HG) Keyboard
20. Spanish (SP) Keyboard
Satellite X200/ X205 Series Maintenance Manual E-10
21. Turkish (TR) Keyboard
22.Turkish F (TR-F) Keyboard
Satellite X200/ X205 Series Maintenance Manual E-11

23.Swedish (SD) Keyboard

24.Belgian (BE) Keyboard
Satellite X200/ X205 Series Maintenance Manual E-12
25.Yugoslavian (YU) Keyboard
26.Norwegian (NW) Keyboard
Satellite X200/ X205 Series Maintenance Manual E-13
27.Scandinavian (ND) Keyboard
28.Canadian Multinational(AC)Keyboard
Satellite X200/ X205 Series Maintenance Manual E-14
29.Canadian Bilingual (CB) Keyboard
30. Japanese (JP) Keyboard
Satellite X200/ X205 Series Maintenance Manual E-15

Appendix F

Series Screw Torque List
Table F-1 Series Screw Torque List

SCREW P/N

MACK20030G0 MA0000069G0 MAC925006G0 MACK25070G0

DISCRIPTION

LCD ASSY M2*3 M2*4 M2.5*6 M2.5*7 MB ASSY M2*2 M2*2.5 M2*4 M2*6 M2*6 M2*8

LOCATION

LCD hinge brkt L&R to LCD For singe inverter For Cover & arm Bezel up side to Cover Bezel down side to Cover Express slot to MB mini card to MB stand-off wireless card to MB stand-off MB to Battery conn EXPRESS conn to MB MB to 1'st HDD conn MB to ODD conn MB to 2'nd HDD conn MDC card to MB stand-off NB thermal to MB stand-off VGA Support to MB stand-off CPU thermal to MB stand-off CPU supp brk to MB VGA_Board to MB MB to Thermal Fan MB to NB stand-off VGA thermal module to VGA pcb TP BKT to Upper F/P BRKT to Upper MB to Lower USB/B to Lower Function PCB to Strip coer VGA Fan to Lower K/B to Upper LVDS to Upper CRT Board to Lower