Corkscrew available on SwissTool spirit PLUS and swisstool CS plus

convenience and use

Be extremely careful when handling and using implements as many have sharp and/or pointed edges. Access plier and wire cutter by opening handles; wire cutter is located at the base of the plier jaws. To close, reverse opening procedure. To open handle implements, grasp implement and pull out slowly until locked in place. To close, release slide mechanism and carefully fold implement back into the handle.

our legacy

Victorinox produces and sells unique, high quality products worldwide which are of practical use in differing areas of life: Swiss Army Knives, Cutlery, Timepieces, Travel Gear, Fashion and Fragrances. The head office of the company is in Ibach, Schwyz, in the heart of Switzerland, where founder Karl Elsener first set up his cutlers business in 1884 and, a few years later, designed the legendary Original Swiss Army Knife.
To use: Gray portion of mini-screwdriver screws into corkscrew with screwdriver tip facing-out. Then screwdriver slots into tool as shown above.
CAUTION Never use the SwissTool implements at 90; always fully extend and lock implements before use.
Only when you see the name Victorinox stamped on the blade can you be assured you have the Original Swiss ArmyTM Knife.

14257 REV2010

lock release
Lifetime limited warranty
Victorinox guarantees all Swiss Army Knives to be of first class steel and provides a lifetime guarantee against any defects in material and workmanship. The warranty does not apply to damage caused by abnormal or unreasonable use of any of the implements (including repairs or alterations other than by our Authorized Repair Center). This warranty gives you specific legal rights. Additional rights may be available under the laws of your State or Province. It is in place of all other warranties, including warranty of fitness for a particular purpose and warranty of merchantability and excludes any liability for incidental or consequential damages.
Sliding the button back towards the SwissTool unlocks the implement, and allows it to fold back into place.

SWISSTOOLtm

maintenance
Extend each implement halfway, then apply a few drops of oil at the base of that implement. After seawater contact, rinse the tool immediately with fresh water. Then dry it well and oil the marked areas.

repairs

If your Swiss Army Knife has a manufacturers defect covered by our warranty, we will either repair or replace it, at our option, without charge. Please send to the address below. Include a brief description of the issue along with your name, address, phone number and e-mail address (optional) with your return. In California and other states so requiring, you may return the Swiss Army Knife through your place of purchase. A damaged Swiss Army Knife not covered by the warranty can be repaired. Note that repair costs and handling charges may apply. If so, you will be notified prior to any service. Please send to the address below. Include a brief description of the issue along with your name, address, phone number and e-mail address (optional) with your return. Service Center: Victorinox Swiss Army Service Center, 7 Victoria Drive, Monroe CT 06468-1212

our products

For more information about our complete line of products, please visit us on-line at www.swissarmy.com. Victorinox Swiss Army, Inc. 2010. All Rights Reserved

SwissTool 27 Features

27 Pliers Screwdriver (2mm) Screwdriver (3mm) Wire Cutter Screwdriver (5mm) Bottle Opener Screwdriver (7.5mm) Large Blade Serrated Blade Metal File Metal Saw Wood Saw Reamer Phillips Screwdriver Chisel / Scraper Strong Crate Opener Wire Bender Wire Stripper Wire Scraper Can Opener Ruler (230mm) Ruler (9 inches) Wire Crimper Hard Wire Cutter Lanyard Hole Easy Kickback Springs Lock Release

SwissTool Rs 26 Features

SwissTool features, replacing Metal File, Metal Saw, and Serrated Blade with Scissors and Seatbelt Cutter.

SwissTool X 27 Features

SwissTool features, replacing Serrated Blade with Scissors.
SwissTool spirit 27 Features

22 (reverse) 25

SwissTool Cs PLUS 37 Features SwissTool X
features 1-27 plus: 28 Bit Case 29 Bit Wrench 30 Hex #Hex #Phillips #Phillips #Torx #Torx #Corkscrew 37 Patented Mini-screwdriver
SwissTool Plus 35 Features SwissTool features 1-27 plus:
Bit Case Bit Wrench Hex #3 Hex #4 Phillips #0 Phillips #3 Torx #10 Torx #15
Wire cutter for regular wire (up to a hardness of 40 hrc) Important: Cut hard wire here only
SwissTool Spirit features plus: 1 Needlenose Pliers 28 Case 2 Screwdriver (2mm) 29 Bit Wrench 3 Screwdriver (3mm) 30 Bit Hex #ire Cutter W 31 Bit Hex #Bottle Opener 32 Bit Phillips #Screwdriver (6mm) 33 Bit Phillips #Crate Opener 34 Bit Torx #Combi-edge Blade 35 Bit Torx #Scissors 36 Space for additional Bits 10 Metal File 37 Patented Mini-Screwdriver 11 Metal Saw 38 Corkscrew 12 Wood Saw 13 Reamer and Punch 14 Phillips Screwdriver 15 Chisel / Scraper Isolation 21 Length-Cutter Wire Bender 18 Wire Stripper Wire Scraper/ Round-Cutter Can Opener 21 Multi Purpose 19 Hook 22 Leather or Nylon Pouch Coupling for Corkscrew 24 Hard Wire Cutter Lanyard Hole Easy Kickback Springs 27 Lock Release

SwissTool spirit Plus 38 Features
Fully extend to use rulers.
6 Bits, Bit Case and Bit Wrench

Premium Marketing Instruments
MAKERS OF THE ORIGINAL SWISS ARMY KNIFE

Swiss Army Knife

Pages 6 11

GolfTool

Page 24
Small, elegant pocket tools

Pages 12 13

EcoLine

Page 25

SwissFlash

Page 14

SwissTool Spirit

Page 26

SwissFlash Laser

Page 15

SwissTool

Page 27

SwissLite

Page 16

Caran dAche Set

Page 28

Karl Elsener
The soldier's knife, 1891
The Swiss "Officer's Knife", 1897

SwissCard Classic

Page 17

Accessories

Page 29
125 YEARS YOUR COMPANION FOR LIFE
In this anniversary year of 2009, there are now 125 years of tradition and experience behind our Victorinox products. Everything began in 1884 with the founding of the company by Karl and Victoria Elsener. The first delivery to the Swiss Army was made in 1891. When Karl Elsener created the legendary Swiss Army Knife in 1897, he could not have known that this would become a symbol for Swiss quality and multi-functionality around the world. The exceptional functional efficiency and reliability of our pocket tools has been demonstrated during numerous expeditions; whether during a NASA space shuttle flight into outer space or around the world in everyday practical use. "A friend, not just a knife," is what one journalist wrote.
For further information, please visit our homepage at www.victorinox.com and click Corporate Gifts. SwissCard Quattro

Page 18

Kitchen Lifestyle

Pages 30 31

SwissCard Lite

Page 19

Corporate Watches

Pages 32 35

There are already 200 companies around the globe that use the Victorinox Swiss Army Knife in advertising and billboard posters as a way of drawing attention to their own products or services. The typical characteristics of our pocket tools, ingenuity, multifaceted and unique design, guarantee an unmistakable and lasting image transfer. With a recognized brand product such as Victorinox, your advertising will become more successful with a lasting impact. In this catalog we are pleased to present a selection of our products as effective image messengers with long-term effectiveness. VICTORINOX

Traveller and Voyager

Pages 20 21

Pre-Press and Artwork

Page 36
The VICTORINOX guarantee for pocket tools (Swiss Army Knife, small pocket tools, SwissCard, SwissTool) and household knives covers all material and manufacturing defects for an unlimited period of time.
Pocket Multi-Tools with Locking Blade

Page 22

Print Processes

Pages 37 39

Carl Elsener Jr.

Carl Elsener Sen.

RescueTool

Page 23

Inscription Surfaces

Pages 40 46

Tools and features
1.6795 SwissChamp 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. large blade small blade corkscrew can opener with screwdriver 3 mm (also for Phillips screws) cap lifter with screwdriver 6 mm wire stripper / bender reamer, punch key ring, stainless tweezers toothpick

the 12 standard features

13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33.
scissors multi-purpose hook wood saw fish scaler with hook disgorger ruler (cm + inches) nailfile with metal file nail cleaner metal saw fine screwdriver 2.5 mm chisel and scraper pliers with wire cutters wire crimping tool Phillips screwdriver (size approx. 1 2) magnifying glass pressurized ballpoint pen pin (stainless steel) mini-screwdriver (to be screwed onto corkscrew 3) sewing eye

1.3713 Huntsman Length 91 mm contains in addition to the 12 standard features:
1.3743 Mountaineer Length 91 mm contains in addition to the 12 standard features: 13. scissors 14. multi-purpose hook 15. nailfile with 16. metal file 17. nail cleaner 18. metal saw
1.3763 Ranger Length 91 mm contains in addition to the 12 standard features: 13. scissors 14. multi-purpose hook 15. wood saw 16. chisel and scraper 17. nailfile with 18. metal file 19. nail cleaner 20. metal saw 21. screwdriver 2.5 mm
The legendary Swiss Army Knives have long since become a classic around the world. Practical, useful and reliable companions, they prove their worth in everyday practice during an outing or on an expedition around the world. As with all Victorinox products, refined alloy, special stainless steel and careful handcrafting guarantee the highest quality. The Victorinox emblem in a metal inlay decorates the glossy cellidor handle as an unmistakable trademark.
13. scissors 14. multi-purpose hook 15. wood saw

Standard-Model

1.3603 Spartan Length 91 mm contains the 12 standard features: 1. large blade 2. small blade 3. corkscrew 4. can opener with 5. screwdriver 3 mm (also for Phillips screws) 6. cap lifter with 7. screwdriver 6 mm 8. wire stripper / bender 9. reamer, punch 10. key ring, stainless 11. tweezers 12. toothpick
1.3613 Camper Length 91 mm contains in addition to the 12 standard features: 13. wood saw
1.3703 Climber Length 91 mm contains in addition to the 12 standard features: 13. scissors 14. multi-purpose hook
1.7804.T Spartan Lite Length 91 mm contains in addition to the 12 standard features: 13. Phillips screwdriver 14. LED, light white 15. mini-screwdriver
1.7915.T Huntsman Lite Length 91 mm same as 1.3713, contains in addition: 16. screwdriver 2.5 mm 17. pressurized ballpoint pen 18. pin (stainless steel) 19. mini-screwdriver 20. Phillips screwdriver 21. LED, light white
1.4603 Tinker Length 91 mm contains the 12 standard features, but with: red.01 red.2 blue.02 blue 288 C.3 black.03 black.4 darkgreen.04 darkgreen 3308 C.7 white.07 white.8 yellow.08 yellow 116 C = with = without.T translucent red.T2 translucent = only blue with Pantone approximate values Phillips screwdriver (instead of corkscrew)
1.4623 Mechanic Length 91 mm contains in addition to the 12 standard features: 13. pliers with 14. wire cutters 15. wire crimping tool Phillips screwdriver (instead of corkscrew)
0.3303 Waiter smaller type 84 mm 1. large blade combination tool with 2. cap lifter 3. can opener 4. screwdriver 5. wire stripper 6. corkscrew 7. key ring, stainless 8. tweezers 9. toothpick
0.3603 Tourist smaller type 84 mm contains the 12 standard features: 1. large blade 2. small blade 3. corkscrew 4. can opener with 5. screwdriver 3 mm (also for Phillips screws) 6. cap lifter with

0.3803 Sportsman smaller type 84 mm as 0.3603, but with:
1.7605.T CyberTool 29 Length 91 mm contains the features 1 29: 1. large blade 2. small blade 3. corkscrew 4. can opener with 5. screwdriver 3 mm 6. cap lifter with 7. screwdriver 6 mm 8. wire stripper / bender 9. reamer, punch 10. key ring, stainless 11. tweezers 12. toothpick 13. sewing eye 14. wrench with 15. 5 mm female Hex drive for D-SUB connectors 16. 4 mm female Hex drive for the bits 17. Bit Phillips 0 (Pozidrive) 18. Bit Phillips 1 (Pozidrive) 19. case with 20. Bit Slotted 4 mm 21. Bit Phillips 2 22. Bit Hex 4 mm 23. Bit Torx 8 24. Bit Torx 10 25. Bit Torx 15 26. pressurized ballpoint pen 27. also to set DIP-switches 28. pin (stainless steel) 29. mini-screwdriver
1.7725.T CyberTool 34 Length 91 mm contains the features 1 29, plus 30. pliers with 31. wire cutters 32. wire crimping tool 33. scissors 34. multi-purpose hook
1.7775.T CyberTool 41 Length 91 mm contains the features 1 34, plus 35. wood saw 36. nailfile with 37. metal file 38. nail cleaner 39. metal saw 40. screwdriver 2.5 mm 41. chisel and scraper
7. screwdriver 6 mm nailfile (instead of small blade) 8. wire stripper / bender 9. reamer, punch 10. key ring, stainless 11. tweezers 12. toothpick
1.3405 Compact Length 91 mm 1. large blade combination tool with 2. cap lifter 3. can opener 4. screwdriver 5. wire stripper 6. corkscrew 7. scissors 8. multi-purpose hook with 9. nailfile 10. key ring, stainless 11. tweezers 12. toothpick 13. pressurized ballpoint pen 14. pin (stainless steel) 15. mini-screwdriver
1.6703 Explorer Length 91 mm contains in addition to the 12 standard features: 13. scissors 14. multi-purpose hook 15. Phillips screwdriver 16. magnifying glass
1.6795 SwissChamp Length 91 mm 33 features, see page 6 7
1.7925.T CyberTool Lite Length 91 mm contains the features1 34, plus: 35. magnifying glass 36. LED, light white
Standard packaging silver box with folding flaps (included in price) L,W: 88 mm x 27 mm (pocket tool 84 mm) L,W: 93 mm x 27 mm (pocket tool 91 mm)

Technical Data

Special packaging silver gift box (extra charge) L,W: 115 mm x 47 mm (pocket tool 84 mm + 91 mm) Standard packaging for SwissChamp as well as CyberTool Special packaging 4.0170 grey metal tin in white sliding sleeve (extra charge) for pocket tool 91 mm according to the price list L,W,D: 155 mm x 56 mm x 22 mm
Type of handle: Victorinox Emblem: Inscription options: Variations: Metal can:
Cellidor polished 91 mm and 84 mm, Cellidor translucent 91 mm Metal inlay Tamponprint / Metal inlay (not possible on translucent Cellidor handles and on the reverse side of 1.3405 and 1.6795) / Etching on the blade / Engraving und Hot stamping All models with corkscrew are also available with a mini-screwdriver (A.3643) for an additional charge Tamponprint (only 1-color possible), maximum print surface 90 x 35 mm

0.6363 Rambler Length 58 mm 1. blade 2. scissors 3. nailfile with 4. screwdriver 5. cap lifter with 6. magnet. Phillipsscrewdriver 7. wire stripper 8. key ring, stainless 9. tweezers 10. toothpick
0.6365 Manager Length 58 mm 1. blade 2. scissors 3. nailfile with 4. screwdriver 5. cap lifter with 6. magnet. Phillipsscrewdriver 7. wire stripper 8. key ring, stainless 9. tweezers / toothpick 10. pressurized ballpoint pen

Standard packaging

They are small, light, elegant and yet solid and multifaceted. Indispensable companions, which are right there when you need them and which perform a valuable service every day. From scissors to the nail file or the ballpoint pen to the orange peeler, you are sure to find a suitable key ring in this product family to meet the needs of your target group.
silver box with folding flaps and Skai case (included in price) for 0.6123, 0.6163, 0.6203, 0.6223, 0.6363 L,W: 70 mm x 27 mm
0.6503 Ambassador Length 74 mm 1. blade 2. nailfile with 3. nail cleaner 4. scissors 5. key ring, stainless 6. tweezers 7. toothpick
0.6603 Executive Length 74 mm 1. large blade 2. small blade 3. nailfile with 4. nail cleaner 5. scissors 6. orange peeler with 7. screwdriver 8. key ring, stainless 9. tweezers 10. toothpick
0.6123 Escort Length 58 mm 1. blade 2. nailfile with 3. screwdriver 4. key ring, stainless 5. tweezers 6. toothpick
0.6125 Scribe Length 58 mm 1. blade 2. nailfile with 3. screwdriver 4. key ring, stainless 5. tweezers 6. pressurized ballpoint pen
0.6163 Rally Length 58 mm 1. blade 2. nailfile with 3. screwdriver 4. cap lifter with 5. magnet. Phillips screwdriver 6. wire stripper 7. key ring, stainless 8. tweezers 9. toothpick
0.6203 Classic Length 58 mm 1. blade 2. nailfile with 3. nail cleaner 4. scissors 5. key ring, stainless 6. tweezers 7. toothpick
0.6223 Classic SD Length 58 mm as 0.6203, but with: nailfile with screwdriver (instead of nail cleaner)
0.6225 Signature Length 58 mm as 0.6223, but in addition with: pressurized ballpoint pen 0.6225.S Stylos for PDAs instead of pressurized ballpoint pen
Special packaging small silver gift box (included in price) for 0.6125, 0.6225, 0.6365 L,W: 82 mm x 37 mm large silver gift box (included in price) for 0.6503, 0.6603 L,W: 115 mm x 47 mm
Technical data Type of handle: Victorinox Emblem: Inscription options: Cellidor polished 58 mm + 74 mm, Cellidor translucent 58 mm Metal inlay Tamponprint / Metal inlay (for 0.6125, 0.6225/S and 0.6365 on front side only, not possible for (.T) translucent handles) / Hot stamping (for 0.6125, 0.6225/S and 0.6365 on front side only) / Engraving, etching on the blade

The SwissCard Lite is packed full with a variety of practical functions and still fits in your briefcase or diary. Besides the classic functions and the magnifying glass, the user has a mini-flashlight that is surprisingly strong thanks to the latest LED technology. A leprechaun in credit card format!

0.7200.T Ruby

0.7222.T2 Sapphire

0.7233.T3 Onyx

0.7300.T Ruby

0.7322.T2 Sapphire

0.7333.T3 Onyx
SwissCard Quattro 12 features 1. letter opener quattro drive with 2. Phillips 3. Phillips 1-2 4. screwdriver 3 mm 5. screwdriver 5 mm 6. pin (stainless steel) 7. nailfile with 8. screwdriver 9. tweezers 10. toothpick 11. pressurized ballpoint pen 12. ruler (cm + inches)
SwissCard Lite 12 features 1. letter opener 2. scissors 3. pin (stainless steel) 4. pressurized ballpoint pen 5. tweezers 6. magnifying glass quattro drive with 7. Phillips 8. Phillips 12 9. screwdriver 3 mm 10. screwdriver 5 mm 11. LED, light white 12. ruler (cm + inches)
Standard packaging cardboard box L,W,D: 120 mm x 120 mm x 6 mm 4.0191 additional sliding sleeve printable in multicolors (extra charge)
Technical data Material: Dimensions: Inscription options: mat plastic L,W,D: 82 mm x 54 mm x 4 mm Tamponprint without protection coating / Etching on the blade / Engraving

Digital clock

The Traveller and the Voyager from Victorinox are multi-functional sport and travel companions created for people who are on the go. Both take up little space in your checked luggage despite their many useful functions. Depending on the model, an altimeter, thermometer, bright white LED, clock, alarm clock, countdown timer, barometer or hiking and travel calculator are combined in one tool.
1.3705.VT3 Voyager Length 91 mm contains the 12 standard features, plus: 13. scissors 14. multi-purpose hook 15. nailfile 16. pressurized ballpoint pen 17. pin (stainless steel) 18. mini-screwdriver 19. digital clock 20. timer 21. countdown

2.3303 Length 84 mm 1. large blade combination tool with 2. cap lifter 3. can opener 4. screwdriver 5. wire stripper / bender
6. corkscrew 7. key ring, stainless 8. tweezers 9. toothpick
2.3803 Length 84 mm 1. large blade 2. nailfile with 3. nail cleaner 4. corkscrew 5. can opener with 6. screwdriver 3 mm (also for Phillips screws)
7. cap lifter with 8. screwdriver 6 mm 9. wire stripper / bender 10. reamer, punch 11. key ring, stainless 12. tweezers 13. toothpick
0.7052.T GolfTool Length 91 mm 1. repair tool 2. ballmarker 3. tee punch 4. groove cleaner 5. cap lifter 6. nailfile 7. blade 8. tweezers 9. toothpick 10. scissors 3.3613 Lnge 91 mm mit den 12 Standard-Funktionen, plus: Standard packaging silver gift box (included in price) L,B,D: 115 mm x 47 mm x 20 13. Holzsge Standard-Type 3.3603 / 13 Length 91 mm contains the 12 standard features: 3.3613 plus: 13. wood saw 3.3703 / 13 Length 91 mm contains the 12 standard features, plus: 13. scissors 3.3713 in addition: 14. multi-purpose hook 15. wood saw red.01 188C 2 blue.02 blue 280 C 3 black.03 black 7 white.07 white = with = without
4.0852 Nylon pouch, black
4.0853 Leather pouch, black with belt clip and pencil
Technical data Type of handle: Colour: Inscription options: 24 Nylon mat, scratch-resistant, 91 mm red translucent, blue translucent, black GolfTool: Etching on the blade On the reverse side: Tamponprint without protection coating / Hot stamping / Engraving / Metal inlay not possible Ballmarker: Tamponprint up to 4 colors Technical data Type of handle: Victorinox Emblem: Inscription options: Nylon mat, scratch-resistant, 84 mm + 91 mm Hot stamping silver (standard) or Tamponprint (if imprinted with Tamponprint) Tamponprint (Victorinox Emblem on front or reverse side also in Tamponprint) without protection coating / Hot stamping / Engraving / Etching on the blade / Metal inlay not possible
Trade journals around the world have consistently named the Victorinox SwissTool Spirit the test winner. In no other pliers are aesthetics, a love for detail and matchless ergonomics combined in such a refined way in a multifunctional tool as in the SwissTool Spirit. Hardened, non-rusting stainless steel crafted into a variety of practical and convenient functions, formed to timeless elegance and life-long functionality.

4.0823.L

4.0823.L1

4.0823.N

39. ratchet (30Nm) (instead of bit wrench) 40. extension bar
Caran dAche and VICTORINOX combine forces for this attractive promotional set. Two of Switzerland's icons with high recognition and memory values guarantee an image transfer!
Valuable and long-lasting Victorinox promotional image items should be carried and protected accordingly. The perfect solution for this is our broad range of accessories. Belt cases in real leather, hardened stainless steel chains, and chromium steel belt attachments lend your gift additional character and increase its attractiveness.
Leather loop pouch, black, red padded flap Leather pouch, black, with hook-and-loop fastener Luxury case, burgundy, hard plastic, grey inlay Luxury case, black, hard plastic, black inlay Leather pouch, brown, with hook-and-loop fastener Nylon pouch, black, with hook-and-loop fastener closure, including flashlight compartment
4.4321.2 Classic and ballpoint pen, red blue ink 4.4321.3 Classic and ballpoint pen, red black ink 4.4323.2 Classic and ballpoint pen, black blue ink 4.4323.3 Classic and ballpoint pen, black black ink

0.6223 Classic

4.4331.2 Spartan and ballpoint pen, red blue ink 4.4331.3 Spartan and ballpoint pen, red black ink 4.4333.2 Spartan and ballpoint pen, black blue ink 4.4333.3 Spartan and ballpoint pen, black black ink

1.3603 Spartan

Technical data Inscription options: Pocket Tool: Ballpoint pen: Case: Packaging: Note: 28
0.6223 see page 13, 1.3603 see page 11 Tamponprint (possible in 1 color only), Engraving Tamponprint (outside, possible in 1 color only) L,W,D: 162 mm x 70 mm x 35 mm Slight color variations may occur between the pocket tool and the pen, because the raw materials used are different. The empty case is suitable for spectacle case.
4.1863 Key ring with imitation leather pouch for 58 mm pocket tool without ring. By this means, the little pocket tool is protected even in a bunch of keys.
4.1853 Leather belt loop, black, length 7 cm with snap hook and split locking ring
4.1858 Belt hanger, stainless steel "Multiclip" Inscription options: etching (etching surface 10 mm x 10 mm)

4.1813 Reinforced chain, smooth, chromiumplated, length 40 cm with snap hook and key ring, stainless
4.1815 Reinforced chain, round, nickel-plated, length 40 cm with 2 snap hooks
6.8003.19G SwissClassic Carving knife blade length 19 cm with FIBROX handle in gift box
The right hardness of the steel blade and a laser-checked cutting angle guarantee a lasting cutting edge and unmatched durability. Chefs and processing operators around the world place their enthusiastic trust in Victorinox Professional and Household Knives. From forged premium knives to practical, inexpensive peelers, you are sure to find the perfect promotional item for your target group in this product range
6.8523.17G SwissClassic Santoku knife blade length 17 cm with fluted edge and FIBROX handle in gift box
5.1020.2 Carving set 2 pieces rosewood handles in gift box 5.1023.2 Carving set 2 pieces Polypropylene handles in gift box
6.8633.21G SwissClassic Bread knife blade length 21 cm with FIBROX handle in gift box
5.1630.21 Bread knife blade length 21 cm with wooden handle in translucent protecting cover gift box (extra charge)
7.7433.23G Grand-Matre Forged Bread knife blade length 23 cm with wavy edge in gift box
7.6074 Potato peeler stainless steel in plastic box
6.7831 red (20 pieces/box) 6.7332 blue (6 pieces/box) 6.7833 black (20 pieces/box) SwissClassic table knife blade length 10 cm with wavy edge and Polypropylene handle in cardboard box
7.7323.17G Grand-Matre Forged Santoku knife blade length 17 cm with fluted edge in gift box
7.6073 Potato peeler red in cardboard box
7.6073.3 Potato peeler black in cardboard box
6.7232 blue (6 pieces/box) 6.7233 black (6 pieces/box) SwissClassic table knife blade length 10 cm with wavy edge and Polypropylene handle in cardboard box
6.7233.6G black 6.7232.6G blue SwissClassic Set 6 table knives blade length 10 cm with wavy edge and Polypropylene handle in gift box
6.7333.6G black 6.7332.6G blue SwissClassic Set 6 table knives blade length 10 cm with wavy edge and Polypropylene handle in gift box
6.7113.3G SwissClassic Vegetable knife set, 3 pieces in gift box 6.7173.8 SwissClassic Cutlery Block 8 pieces in gift box
Inscription options: Minimum quantity:
Etching on the blade / Tamponprint on Potato peeler, Gift box (G) no imprint possible pieces (knives) for 6.7113.3G, 6.7233.6G, 6.7232.6G, 6.7333.6G, 6.7332.6G, 6.7332.6G, 6.7232, 6.7233, 6.7332, 6.7831 and 6.7833

Our promotional watch collection offers practical design and functionality at attractive prices. Nevertheless, they fulfill the highest standards and are appealing due to their straightforward elegance. The three lines, Field, Garrison and Garrison Elegance, are available in different dial and watchband colors. They were specifically created to help you achieve success when conveying your message, whether for sales promotions and incentive programs, or simply as an advertising tool at special events.
FIELD Stainless steel bracelet (316L) 30 mm 26007.CB white dial 38.5 mm 26006.CB white dial FIELD Chrono brown leather strap 40 mm 26049.CB white dial FIELD Chrono Stainless steel bracelet (316L) 40 mm 26050.CB white dial

Chrono functions

quality, characteristics. Swiss-made quartz movement Stainless steel case Water-resistant to 100 meters (10ATM) Hardened mineral glass. Luminous hands Crown (in stainless steel) with date-changing Date and Military Time Exclusive for Corporate Business
. Allows 1/10th of a sec. timing. 60 sec. and 30 min. counters. Split timing

26006.CB

Standard packaging L, B, H: 102 x 82 x 70 mm
FIELD black synthetic strap 38.5 mm 26008.CB black dial 26000.CB white dial 30 mm 26009.CB black dial 26001.CB white dial
FIELD black leather strap 30 mm 26003.CB white dial 26011.CB black dial 38.5 mm 26002.CB white dial 26010.CB black dial
FIELD brown leather strap 38.5 mm 26012.CB black dial 26004.CB white dial 30 mm 26013.CB black dial 26005.CB white dial
Technical data for watches Inscription options: Tamponprint on dial (multicolor) Dial Chrono no imprint possible Engraving on case back and case side Tamponprint on gift box (available only 1-color white)

GARRISON

quality, characteristics. Swiss-made quartz movement Stainless steel case Water-resistant to 100 meters (10ATM) Hardened mineral glass. Luminous hands and dots Crown (in stainless steel) with fast date-changing Date Exclusive for Corporate Business

GARRISON ELEGANCE

GARRISON black synthetic strap 40 mm 26024.CB cream dial 34 mm 26025.CB cream dial
GARRISON black leather strap 34 mm 26035.CB black dial 26043.CB silver dial 40 mm 26034.CB black dial 26042.CB silver dial
GARRISON Stainless steel bracelet (316L) 40 mm 26046.CB silver dial 26038.CB black dial 34 mm 26047.CB silver dial 26039.CB black dial
GARRISON ELEGANCE black synthetic strap 40 mm 26055.CB black dial 32 mm 26060.CB black dial
GARRISON ELEGANCE brown leather strap 32 mm 26058.CB silver dial 40 mm 26053.CB silver dial
GARRISON ELEGANCE black leather strap 40 mm 26052.CB black dial 26051.CB silver dial 32 mm 26057.CB black dial 26056.CB silver dial
GARRISON brown leather strap 34 mm 26029.CB cream dial 40 mm 26028.CB cream dial
GARRISON ELEGANCE Stainless steel bracelet (316L) 32 mm 26059.CB silver dial 40 mm 26054.CB silver dial

26034.CB

26054.CB
It is possible to print individual advertising messages according to your wishes on practically all items in our product range. Your artwork will be converted and reworked by our artists. Every print process requires small adjustments to the artwork in order to be able to achieve an optimum result. Our goal is to reproduce your CD or CI as perfectly as possible which we are able to do daily thanks to the latest technology.
For high-quality products, which are sent around the world as image bearers, the inscription must also be at the same high standard. With our large variety of processes we guarantee that your advertising statements can be reproduced according to your wishes. Our goal is to make sure that your message forms an integral unit with one of our products making it a more successful and effective marketing instrument for your brand and message.
Inscription Artwork Please provide your inscription artwork in one of the following forms: Electronic files: Artwork for company logos
FreeHand FreeHand eps Adobe Illustrator eps Datei
Fonts must be converted to paths. The colors must be defined precisely with Pantone, RAL or HKS numbers.

Etching

Inscription on metal parts in an electrolytic way (electrolyte and etching current). Suitable for logos with fine lines or larger surfaces, as well as narrow and bold fonts. Very durable. Color: anthracite dark gray

Protective Lacquer

A Victorinox tamponprint inscription on cellidor cases is protected with a high gloss protective lacquer (with the exception of the classic models with LED, laser, or ballpoint pen). The purpose of the hard lacquer is to provide the already durable imprint with greater resistance to abrasion and chemical substances. For example, this ensures that your advertising message remains attractive on a keychain for a longer time and is not rubbed off. This process is environmentally friendly and the lacquer is food safe. Please note: Color printing on a dark background must always have a preprinted white layer underneath. When printing photographs (CMYK), this means an additional work step (white base color plus 4 color printing).

Metal Inlay

A chromium steel inlay is created photochemically and then pressed flush into the plastic casing under pressure and using heat. Not possible with nylon and transparent cases for technical reasons. High-end appearance and very long durability. Color: silver (chromium steel)
Important: All of the free-standing letters, must be joined together into a single unit. For negative metal inlays (see illustration), closed letters and numbers must be opened.

Hot Stamping

Stamping a motif to a certain depth is done with the help of a brass stamp, stamping transfer foil, heat, and pressure. Suitable for simple logos, narrow fonts, and numbers. Long-lasting durability is only guaranteed with narrow fonts but not with larger surfaces. Colors: Single colors only; silver, white, gold, blue, red, black or green; no Pantone colors. Five standard fonts (see illustration) are available for small quantities; the stamping costs are dropped with these fonts.

Times (small)

Times (large)

Times (small+large)

Helvetica Condensed

Helvetica

Script

Engraving

A tool cuts the font into the material. For plastic surfaces, the engraving is then filled with a white contrasting color. Suitable for small runs, individual names and short phrases without logos (special letter possible). For diamond engraving on the SwissTool, logos and inscription are also possible. Colors: White contrasting, colored filling for plastic surfaces. No additional colors for steel (SwissTool). Please note: It is possible to vary the pitch of the standard fonts. Logos and inscription on the SwissTool appear contoured (outlined).

Block letters Futura

Block letters Futura italics
Ornamental letters Script italics

Diamond engraving Logo and name of company Font Modrome Diamond engraving

Inscription Surfaces 1:1

The product pictures and the inscription surfaces illustrated (gray areas) are in a scale of 1:1. The inscription is placed by our experts inside these gray areas, observing optical and graphic rules, and in line with the request of the customer with regard to logo, letters/text.
Small, Elegant Pocket Tools
SWITZERLAN X D STAINLESS ROSTFREI

VICTORINO

Swiss Army Knives / EcoLine

Front side

Hot stamping
Front side with Emblem, length 58 mm
Front side without Emblem, length 58 mm (reverse side with same surface)
Reverse side Front side translucent, length 58 mm Reverse side translucent, length 58 mm
Front side with LED, Emblem is always on the front, length 58 mm Front side with Emblem, length 91 mm Reverse side with Emblem, length 91 mm
Front side translucent with LED, Emblem is always on the front, length 58 mm
Front side with Emblem, length 74 mm
Front side without Emblem, length 74 mm (reverse side with same surface)
Front side without Emblem, length 91 mm
Reverse side without Emblem, length 91 mm
Pocket Multi-Tools with locking blade
Front side translucent always with Emblem, length 91 mm
Reverse side translucent without Emblem, length 91 mm Front side with Emblem, length 111 mm
Front side translucent always with Emblem, length 91 mm, Traveller and Voyager
Reverse side translucent without Emblem, length 91 mm, Traveller and Voyager
Front side without Emblem, length 111 mm
Front side with Emblem, length 84 mm
Reverse side with Emblem, length 84 mm
Reverse side, length 111 mm (for models 0.83., 0.84., 0.86., with internal spring-release)
Front side without Emblem, length 84 mm
Reverse side without Emblem, length 84 mm
Reverse side with slider, length 111 mm, (for models 0.88., 0.89., 0.90., external locking-release by means of slider)

Swiss Army Knives

Platzierung von Metalleinlagen
Only for polished Cellidor handles

Reverse side

0.62. blade 58 mm

1.36. blade 91 mm

Front side with Emblem, length 91 mm
Reverse side without Emblem, length 91 mm 0.70. blade GolfTool 0.83 Multi-Tools with locking blade
0.36. blade 84 mm Front side with Emblem, length 84 mm Reverse side without Emblem, length 84 mm
0.86 One-handed blade Rescue Tool

Cutlery

6.78. Table knife

XONIROTCIV IWS

DNALREZT SSELNIATS IERFTSOR
Reverse side without Emblem, length 58 mm 6.72. Steak knife