Pioneer A-209R Manual
Pioneer A-209R - Technical Specifications Home Cinema Amplifier, size: 190 KB
Here you can find all about Pioneer A-209R like stereo amplifier and other informations. For example: manual, stereo amplifier black, review.
Pioneer A-209R manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Pioneer A-209R please write about it to help other people. [ Report abuse or wrong photo | Share your Pioneer A-209R photo ]
User reviews and opinions
|Amilcar||10:02pm on Tuesday, October 26th, 2010|
|Great budget entry level amp Bought this to replace my trusted old Sansui amp of 25 years service which finally gave up the ghost. Great Amp I bought this amplifier just before Xmas, and I have to say that I think it is a great bit of kit.|
|snojax||6:31pm on Monday, July 5th, 2010|
|I have the same Pioneer A209R amp in the North America version (A-35R). It is an outstanding amp for the little money it costs. Outstanding features. Everythings good! Looks, quality, sound, price.|
|msz59||6:43pm on Sunday, June 27th, 2010|
|Does exactly what it is designed to do and does it very well Have yet to discover any bad points|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Thank you for buying this PIONEER product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However, the method of connecting and operating the unit is the same.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
This product complies with the Low Voltage Directive (73/ 23/EEC), EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC).
RISK OF ELECTRIC SHOCK DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
FOR USE IN THE UNITED KINGDOM
The wires in this mains lead are coloured in accordance with the following code : Blue : Neutral Brown : Live If the plug provided is unsuitable for your socket outlets, the plug must be cut off and a suitable plug fitted.
The cut-off plug should be disposed of and must not be inserted into any 13 amp socket as this can result in electric shock. The plug or adapter or the distribution panel should be provided with a 5 amp fuse. As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows : The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
Do not connect either wire to the earth terminal of a three-pin plug. NOTE After replacing or changing a fuse, the fuse cover in the plug must be replaced with a fuse cover which corresponds to the colour of the insert in the base of the plug or the word that is embossed on the base of the plug, and the appliance must not be used without a fuse cover. If lost, replacement fuse covers can be obtained from your dealer. Only 5 A fuses approved by B.S.I. or A.S.T.A to B.S. 1362 should be used.
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement.
MAINTENANCE OF EXTERNAL SURFACES
Use a polishing cloth or dry cloth to wipe off dust and dirt. When the surfaces are dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleaners. Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit, since these will corrode the surfaces.
FEATURES... 3 INSTALLATION... 3 CONNECTIONS... 4 PANEL FACILITIES.. 6 OPERATIONS... 9 REMOTE CONTROL... 10 TROUBLESHOOTING.. 11 SPECIFICATIONS... 12
7 Direct Energy MOS Power Amp(on the A-307R)
Pioneer introduces amp circuitry featuring Direct Energy MOS FET devices for high performance. Together with Pioneer's original Wide Range Linear Circuit technology, this helps achieve reducing power consumption, while maintaining the power of current models. In terms of performance, it contributes to flat damping factor characteristics across the audio spectrum, and improved power linearity.
7 Stabilizer (on the A-209R only)
Transformer stabilizer and stabilizer frame (attached to chassis) deliver powerful sound.
7 Low power consumption design 7 High-power Output:
7 Advanced Direct Energy MOS Power Amp(on the A-209R)
Pioneer incorporates highest quality amp circuitry featuring Advanced Direct Energy MOS FET devices which can achieve higher performance. Together with Pioneers original Wide Range Linear Circuit technology they reduce power consumption while maintaining the power output of current models. In terms of performance, this technology contributes to flat damping factor characteristics across the audio spectrum. It also allows a wide range and especially ultra high frequencies to be reproduced more accurately and improves power linearity.
A-307R.. 80 W + 80 W/4 (DIN) 55 W + 55 W/8 (DIN) A-209R.. 60 W + 60 W/4 (DIN) 45 W + 45 W/8 (DIN) 7 Wide-Range Linear Circuit
This new current feedback circuit assures improved operating stability for flat output impedance and stable driving of speakers across the full range of frequencies.
7 Silent microprocessor system
Install the unit in a well ventilated location where it will not be exposed to high temperature or humidity.
Do not install the unit in a location which is exposed to direct rays of the sun, or near hot appliances or radiators. Excessive heat can adversely affect the cabinet and internal components. Installation of the unit in a damp or dusty environment may also result in a malfunction or an accident. (Avoid installation near cookers etc., where the unit may be exposed to oily smoke, steam or heat.) Do not install the unit on a tottered stand, nor on an unstable or inclined surface.
When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 60 cm at top, 10 cm at rear, and 30 cm at each side). If not enough space is provided between the unit and walls or other equipment, heat will build up inside, interfering with performance or causing malfunctions. Do not place on a thick carpet, bed, sofa or fabric having a thick pile. Do not cover with fabric or other covering. Anything that blocks ventilation will cause internal temperature to rise, which may lead to breakdown or fire hazard.
Before making or changing the connections, switch off the power switch.
Cassette deck/ CD recorder/ MD recorder
Adaptor component (graphic equalizer, etc.) Speaker system B
TAPE 1/MD REC PLAY
TAPE 2 MONITOR REC PLAY
IN IN IN IN OUT IN OUT IN
DVD player, VCR, etc. Speaker system A
CONNECTING THE SPEAKER CORDS
1. Strip off the vinyl covering and twist the tip of the wire core. 10mm
Twist the wire core.
2. Loosen the knob and insert the wire core into the terminal hole. 3. Tighten the knob to fix the wire core in place. 1 2
See page 5.
To an AC wall socket.
Do not allow any of the cord conductors to protrude from the terminals or touch any other conductors. Malfunctioning or breakdowns may occur when conductors come into contact with each other.
When speaker systems are connected to only SPEAKERS A or SPEAKERS B terminals, such speakers should have rated impedance in the range of 416. When speaker are connected to both A and B terminals, they should have a rated impedance in the range of 8 32.
CONNECTING THE INPUT/OUTPUT CORDS
Connect the white plug to the L (left) channel, and the red plug to the R (right) channel. Be sure to push the plugs securely. Left channel
Open the battery compartment cover on the back of the remote control unit. Insert size AA/R6P dry cell batteries into the battery compartment in accordance with the indications (,) inside the compartment. Close the cover of the battery case.
Incorrect use of batteries may lead to leakage or rupture. Always be sure to follow these guidelines:
1. Always insert batteries into the battery compartment correctly matching the positive and the negative polarities as indicated inside the compartment. 2. Never mix new and used batteries. 3. Batteries of the same size may have different voltages depending on their type. Do not mix different types of batteries.
REMOTE CONTROL CORD CONNECTIONS
By interconnecting the CONTROL jacks of Pioneer units with the mark, the entire system can be operated with this remote control unit, although some of the units (AM/FM tuner, CD player, cassette deck, etc.) may not be equipped with remote sensors. The entire system can be operated by a remote control unit by connecting PIONEER stereo components to each other using the control input (CONTROL IN) jack on each component. Use the remote control cord supplied with the respective unit for the connection. An example is shown in the figure. As long as you connect OUT to IN, the connecting sequence is arbitrary. When a unit has only an IN connector, however, connect it last.
RANGE OF REMOTE CONTROL
When the remote control unit is pointed at the remote sensor window on the stereo amplifier and any of its buttons is pressed, the unit and other components can be operated by remote control. Distance : Within a range of approx. 7 meters from the units remote control sensor window. Angle : Within approx. 30 degrees from the center of the units remote control sensor window. Remote control will not be possible if there is an obstacle between the remote control unit itself and the units remote control sensor window.
When the POWER switch is set to OFF, the components connected to the CONTROL OUT jack can not be operated with the remote control unit.
Remote control unit
The accessory remote control unit can be used to control some functions of other Pioneer cassette decks, CD players and tuners (only those Pioneer components bearing the mark). Remote control sensor window
CONTROL OUT IN
[ FRONT PANEL ]
z?B Direct Energy MOS
CD TUNER PHONO LINE TAPE 1 /MD TAPE 2 MONITOR
OFF _ ON
A SPEAKERS B BASS TREBLE BALANCE INPUT SELECTOR
TAPE 2 MONITOR
~ = - 0
The illustration shows the A-307R.
1 POWER ( OFF/_ ON) switch
Press to turn power to the unit ON and OFF. This unit cannot be turned ON and OFF using the remote control unit.
5 TAPE 2 MONITOR button/indicator
Use when there is an adaptor component (graphic equalizer, etc.) or cassette deck connected to the TAPE2 MONITOR terminals. On : Indicator lights when using the adaptor component or listening to the cassette deck. Off : Indicator goes off when not in use.
2 REMOTE CONTROL SENSOR window 3 VOLUME control
Use to adjust the volume level.
When no connections are made to the TAPE2 MONITOR terminals, or when they are not in use, be sure to set this switch to the off position. (No sound will be heard if it is set to the on position.) When the TAPE2 MONITOR indicator is on and the INPUT SELECTOR knob is not set to TAPE1/MD(on the A-307R) or TAPE1/CD-R/MD(on the A-209R), the signals which are input through TAPE 2 MONITOR are then output at TAPE1/ MD(on the A-307R) or TAPE1/CD-R/MD(on the A-209R) REC OUT.
4 INPUT SELECTOR knob/indicators
Turn the knob clockwise or counterclockwise so that the indicator lights for your desired input source. Turning the knob clockwise causes the lit indicator to right. Turning counterclockwise causes it to left. CD : For compact disc playback with a CD player. TUNER : For AM or FM broadcast reception with a tuner. PHONO : For record playback with a turntable. LINE : Set to this position when listening to the program from a component connected to the LINE terminals. TAPE 1/MD : For playback with a cassette deck or MD recorder connected to TAPE1/MD terminals (on the A-307R only). TAPE 1/CD-R/MD:For playback with a cassette deck,CD recorder or MD recorder connected to TAPE1/CD-R/ MD terminals(on the A-209R only).
6 BALANCE control
Should normally be left in the center position. Adjust balance if the sound is louder from one of the speakers. If the right side is louder, turn toward the L (left) position and if the left side is louder, turn toward the R (right) position.
This control does not operate when the DIRECT button is in the on position.
7 DIRECT button/indicator
Use this button when you do not wish to pass the output from input terminal equipment through the various frequency adjusting circuits (BASS, TREBLE, BALANCE, LOUDNESS). On : The indicator lights: The signals passing through the input terminals are reproduced without passing through the various frequency adjusting circuits. This results in flat, pure sound which is a more faithful reproduction of the input source. Off : The indicator goes off: The signal passes through the various frequency adjusting circuits.
0 BASS tone control
Use to adjust the low-frequency tone. The center position is the flat (normal) position. When turned to the right, lowfrequency tones are emphasized; when turned to the left, low-frequency tones are de-emphasized.
- SPEAKERS B (ON/OFF) button/indicator
Use this button to listen to the speaker system connected to SPEAKERS B terminals. ON : The indicator lights. Sound is heard from the speaker system. OFF : The indicator goes off. No sound is heard from the speaker system. Set to this position when listening with headphones.
8 LOUDNESS button/indicator
Use when listening at low volume levels. On : The indicator lights: Boosts low and high frequencies to give added punch to playback even at a low volume level. Off : The indicator goes off: Should normally be left in this position.
This button does not operate when the DIRECT button is in the on position.
= PHONES jack
When using headphones, insert the plug into this jack.
The speakers continue to output sound even when headphones are plugged into this jack. To mute the sound from the speakers, press the SPEAKERS button to OFF.
9 TREBLE tone control
Use to adjust the high-frequency tone. The center position is the flat (normal) position. When turned to the right, highfrequency tones are emphasized; when turned to the left, high-frequency tones are de-emphasized.
~ SPEAKERS A (ON/OFF) button/indicator
Use this button to listen to the speaker system connected to SPEAKERS A terminals. ON : The indicator lights. Sound is heard from the speaker system. OFF : The indicator goes off. No sound is heard from the speaker system. Set to this position when listening with headphones.
[ REAR PANEL ]
1 GND (Turntable ground) terminal 8 TAPE 2 MONITOR REC (OUT) terminals 2 PHONO terminals 9 TAPE 2 MONITOR PLAY (IN) terminals 3 TUNER terminals 0 SPEAKERS B terminals (Right channel) 4 CD terminals - SPEAKERS B terminals (Left channel) 5 LINE terminals = SPEAKERS A terminals (Right channel) 6 TAPE 1/MD REC (OUT) terminals (on the A-307R
only) TAPE 1/CD-R/MD REC (OUT) terminals (on the A-209R only)
~ SPEAKERS A terminals (Left channel) ! CONTROL OUT jack (see page 5)
This jack is for output of control signals when operating other components bearing the mark with the attached remote control unit.
7 TAPE 1/MD PLAY (IN) terminals (on the A-307R
only) TAPE 1/CD-R/MD PLAY (IN) terminals (on the A-209R only)
@ AC INLET jack
Connect power cord to here and an AC wall socket, or the AC outlet of an audio timer. If you are going to be away from home for a long period of time, disconnect the unit from the wall socket.
If you use an other power cord than provided, we cannot assume the liabilities in what may occur as a result of it. (The provided power cord has a current capacity of 2.5 A.)
BEFORE BEGINNING OPERATIONS
1. Set the VOLUME control to minimum. 2. Set the POWER switch to ON. 3. Press the SPEAKERS button corresponding to the speaker system to be used. 4. Set the BALANCE control to the center position. 5. Set the DIRECT button to off. 6. Set the TAPE2 MONITOR button to off. 1. Load tapes for playback (pre-recorded tape) and recording (blank tape) into the respective cassette decks. 2. Select the copying direction with the INPUT SELECTOR knob and TAPE2 MONITOR button.
When copying from the cassette deck of TAPE1/MD(on the A-307R) or TAPE1/CD-R/MD(on the A-209R) terminals to the cassette deck of the TAPE2 MONITOR terminals: Set the INPUT SELECTOR knob to TAPE1/ MD(on the A-307R),TAPE1/CD-R/MD(on the A-209R). When copying from the cassette deck of TAPE2 MONITOR terminals to the cassette deck of TAPE1/MD(on the A-307R),TAPE1/CD-R/MD(on the A-209R) terminals: Set the TAPE2 MONITOR button to ON and the INPUT SELECTOR knob to a position other than TAPE1/ MD(on the A-307R),TAPE1/CD-R/MD(on the A-209R).
1. Set the INPUT SELECTOR knob to the desired playback source.
For playback of a compact disc: Set to [CD]. For reception of an AM/FM broadcast: Set to [TUNER]. For playback of a record: Set to [PHONO]. For playback with the equipment connected to LINE terminals: Set to [LINE]. For playback of a tape: Set to [TAPE1/MD](on the A307R),TAPE1/CD-R/MD](on the A-209R).
3. Operate the cassette decks to begin copying.
Set the cassette deck with the original (playback) tape to the playback mode, and set the cassette deck with the blank tape to the recording mode.
When you do not want to monitor the TAPE2 MONITOR sound, set the TAPE2 MONITOR button to OFF. When you select PHONO, the sound is muted for a few seconds.
TO USE THE COMPONENT CONNECTED TO THE TAPE2 MONITOR TERMINALS
[For a cassette deck]
A cassette deck connected here can be operated in the same way (recording and playback) as a deck connected to the TAPE2 MONITOR terminals. Also, if two decks are used, you can copy tapes from one deck onto the other (see the section COPYING TAPES).
2. Operate the equipment to begin playback. 3. Adjust playback volume with VOLUME control on this unit. 4. Adjust the tone to your preference using the BASS and TREBLE controls, and LOUDNESS button.
1. Set the TAPE2 MONITOR button to ON. 2. Operate the cassette deck to perform playback (or recording).
1. Select the recording equipment with the INPUT SELECTOR knob. 2. Begin recording by operating the recording equipment and cassette deck.
Refer to the operating instructions of your cassette deck for proper operating procedures.
The source selected with the INPUT SELECTOR knob is backed up for a few days even when the POWER switch is set to off or the power cord is unpluged. After this period, the CD is automatically selected when the power is supplied.
[For an adaptor component]
By connecting a graphic equalizer, source sounds (from discs, tapes, AM/FM broadcasts, etc.) can be heard with added sound and tone compensation. Sounds compensated with the adaptor component can be recorded on the cassette deck connected to the TAPE1/MD(on the A-307R) or TAPE1/CD-R/MD(on the A-209R) terminals.
When two decks are used, you can record the sounds from one deck onto the other.
To make a tape copy with contents identical to the original tape. To edit a recording of an FM broadcast in order to cut out unwanted commercials, recording only of desired material onto another tape.
1. Set the TAPE2 MONITOR button to ON. 2. Play back the source. 3. Operate the adaptor component.
Be sure to perform this operation with the adaptor component power switch in the on position. Even when not using the adaptor component, its power switch must be left on. If the adaptor component is switched off, no sound will be produced, or the playback sound will be distorted.
STANDBY/ON CD TUNER TAPE
STEREO AMPLIFIER REMOTE CONTROL UNIT
1 CD POWER button
Switches CD player power ON/OFF.
7 TUNER POWER button
Switches TUNER power ON/OFF.
2 TAPE SELECT button
Selects the cassette No. (1 to 6) for multi-cassette changer.
8 TAPE POWER button
Switches the cassette deck power ON/OFF. (Can not turn ON/OFF some cassette decks.)
3 DECK II button
To operate Deck II, press this button before pressing the operating buttons. Also, when using a single deck, press this button before pressing the operating buttons.
9 TAPE operation buttons
2, 3 : Playback in the direction of the arrows. 7 : Stop 1, : Tape fast forward/reverse.
4 DECK I button
To operate Deck I, press this button before pressing the operating buttons.
0 CD player operation buttons
3 : Returns you to the start of the current track. (Track search) : Takes you to the start of the next track. (Track search) : Stop : Play
5 DISC SELECT button
Press this to select discs on a multi or twin tray compact disc player.
6 Input selector button
Use to select the playback source. CD : For compact disc playback with a CD player. TUNER : For AM or FM broadcast reception with a tuner. PHONO : For record playback with a turntable. TAPE 1 : For playback with a cassette deck,CD recorder or MD recorder connected to TAPE1/MD(on the A307R) or TAPE1/CD-R/MD(on the A-209R) terminals. TAPE 2 : For playback with a cassette deck or adaptor connected to TAPE 2 MONITOR terminals. LINE : For playback with a component connected to the LINE terminal.
- STATION + (up), (down) buttons
Calls each station number in sequence.
= VOLUME + (up), (down) buttons
+.. Increases the volume. ... Decreases the volume.
When the accessory remote control unit is used to operate other Pioneer components with the mark, it cannot be used to operate functions which do not correspond to the functions listed on the remote control unit.
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your dealer to carry out repair work. Symptom No power supplied to unit. Cause Power plug is disconnected from outlet. The amplifiers power plug has been plugged into another component power outlet (e.g. timer, etc.) but power to that unit is disconnected. The AC INLET plug is disconnected. Connecting cords are disconnected from terminals, or connected incorrectly. Terminals, or connecting cords pin plugs are dirty. The TAPE2 MONITOR button is set to ON (except when using an adaptor component). Operation of other components is incorrect. The position of the INPUT SELECTOR does not match the component to be played back. Both SPEAKERS selector buttons are set to OFF. Connecting cords or speaker cords are disconnected on that side. BALANCE control is set to one side. Connections are incorrect. Operation of cassette deck is incorrect. The TAPE2 MONITOR button is set to ON. Cannot perform tape copying. The position of the INPUT SELECTOR knob and TAPE2 MONITOR button are incorrect (when using 2 cassette decks). Operation of cassette decks is incorrect. Batteries are dead or no batteries in remote control unit. The remote control sensor is not receiving any signals. The remote control cord is not connected correctly. A fluorescent light is shining on the remote sensor window. Remedy Insert plug securely into outlet. Turn on power to other component.
Insert the AC INLET plug securely till the bottom of the jack. Connect securely. Clean terminals and plugs. Set the TAPE2 MONITOR button to OFF. Consult the operating instructions for the other components. Set the button correctly (CD, TUNER, PHONO,LINE,TAPE1/MD(on the A307R),TAPE1/CD-R/MD(on the A-209R)). Set one button or both buttons to ON. Connect securely. Set BALANCE control to center position. Reconnect properly. Consult the operating instructions for the cassette deck. Set the TAPE2 MONITOR button to OFF. Set buttons correctly (See section COPYING TAPES). Consult the operating instructions for the cassette decks. Insert new batteries (see page 5). Operate the remote control unit within a range of 7 meters and an angle of 30 degrees (refer to page 5). Connect correctly (see page 5). Move so fluorescent light does not shine directly on amplifiers front panel remote sensor window.
No sound from one speaker.
Cannot record tapes.
The remote control unit does not work. (Other components cannot be operated.)
Abnormal functioning of this unit may be caused by static electricity, or other external interference. To restore normal operation, turn the power off and then on again, or unplug the AC power cord and then plug it in again.
Continuous power output (both channels driven at 20 Hz to 20 kHz)** [A-307R] T.H.D. 0.1 %, 8 . 45 W + 45 W* T.H.D. 0.15 %, 4 .. 65 W + 65 W* [A-209R] T.H.D. 0.1 %, 8 . 35 W + 35 W* T.H.D. 0.15 %, 4 .. 45 W + 45 W* DIN Continuous power output (both channels driven at 1 kHz) [A-307R] T.H.D. 1.0 %, 8 .. 55 W + 55 W T.H.D. 1.0 %, 4 .. 80 W + 80 W [A-209R] T.H.D. 1.0 %, 8 .. 45 W + 45 W T.H.D. 1.0 %, 4 .. 60 W + 60 W Total harmonic distortion** [A-307R] 20 Hz to 20 kHz, 22.5 W, 8 .. 0.08 %* [A-209R] 20 Hz to 20 kHz, 17.5 W, 8 .. 0.08 %* Power output specification is for when power supply is 230 V. Input sensitivity/impedance PHONO (MM).. 2.8 mV/50 k [A-307R] CD, TUNER, LINE, TAPE1/MD, TAPE2 MONITOR... 200 mV/50 k [A-209R] CD, TUNER, LINE, TAPE1/CD-R/MD, TAPE2 MONITOR... 200 mV/50 k PHONO (MM) overload level 1 kHz, T.H.D. 0.1 %.. 150 mV Output level/impedance TAPE1 REC, TAPE2 MONITOR REC. 200 mV/1 k Frequency response PHONO (MM). 20 Hz to 20 kHz, 0.5 dB [A-307R] CD, TUNER, LINE, TAPE1/MD, TAPE2 MONITOR.. 5 Hz to 100 kHz, +0 dB* 3 [A-209R] CD, TUNER, LINE, TAPE1/CD-R/MD, TAPE2 MONITOR.. 5 Hz to 100 kHz, +0 dB* 3 Tone control BASS.. 8 dB (100 Hz) TREBLE... 8 dB (10 kHz) Loudness contour (volume control set at 30 dB position).. +6 dB (100 Hz)/+4 dB (10 kHz) Signal-to-Noise ratio (IHF short circuit, A network) PHONO (MM, 5 mV input).. 85 dB* [A-307R] CD, TUNER, LINE, TAPE1/MD, TAPE2 MONITOR... 106 dB* [A-209R] CD, TUNER, LINE, TAPE1/CD-R/MD, TAPE2 MONITOR... 106 dB* Signal-to-Noise ratio (DIN, continuous power/50 mW) PHONO (MM).. 71 dB/67 dB* [A-307R] CD, TUNER, LINE, TAPE1/MD, TAPE2 MONITOR... 91 dB/71 dB* [A-209R] CD, TUNER, LINE, TAPE1/CD-R/MD, TAPE2 MONITOR... 91 dB/71 dB*
Power requirements. AC V, 50/60 Hz Power consumption [A-307R]... 140 W [A-209R]... 130 W Dimensions (including knobs and other protruding parts).. 420 (W) x 114 (H) x 307 (D) mm Weight (without package) [A-307R]... 5.9 kg [A-209R]... 4.7 kg
Remote control unit... Batteries (AA/R6P)... Power cord (Rated current 2.5 A).. Operating instructions... Warranty card... 1
Specifications and design are subject to possible modifications without notice, due to improvements.
* Measured with DIRECT button set to on. ** Measured by Audio Spectrum Analyzer.
Published by Pioneer Corporation. Copyright 2000 Pioneer Corporation. All rights reserved.
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS [USA] INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada PIONEER ELECTRONIC [EUROPE] N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium TEL: 03/570.05.11 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL:  9586-6300 PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. San Lorenzo Num 1009 3er piso Desp. 302 Col. Del Valle, Mexico D.F. C.P. 03100 TEL: 5-688-52-90
E-510 W28-DR2000 T730SH M2N68 Plus TX-22LT2F Review Optio L20 6 0 KDL-37EX505 M3 2004 Xpression III TC-2918 RSX-1058 LS180CPI VGN-C1z-B NO 0855 9600S VA721 DCR-DVD105 XRS9330 KDC-6021 Naturallyspeaking 6 CD502 Century 1995 Easy R30 VP-DX10 XRS 970 LMS-334 EL-5160S Powershot TX1 London MP48 1190 RC8 SV-0602H DTT901 951 Twin RM822 HM70-100 M737T Professional KGE2000TSC L1530S R-4 PRO 4500C 9410Z Syntia T4010D 240v SH-L2AM AG-DP800H HDB65 S306PE EP737 107S61 15350 MS8157E Dmrbs850EB Matiz Sdvia HMX-H200BP 5400HS LG XA63 CDX-L280 Presario 5300 ZE-NC2010 TD090 Cuiseur Pw-222 Manual KRC-877R MPC-501 4641 Pyro Alto L-8 706-AVR 32LB9R1 Scanmaker I320 C7-24 SPH-S5350 Thinkpad X20 FAX-1010E MF6580CX Fargo C30E 42LC45 R2 0 334GSM IUP L1900J-BF Netdefend Freehand MX Gigaset S67H S75398KG38 A-SV240 WII 854 I-1 XV-DV55 Stereo Amplifier Black M203WA KX-FLM662CX Deluxe FBX1200 RX-V2700 NWZ-A728 RS-DC10 LS650 KB 42
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101