KD-ADV6270/KD-DV6200

Installation/Connection Manual Manual de instalacin/conexin Manuel dinstallation/raccordement

GET0374-002A

0106DTSMDTJEIN EN, SP, FR 2006 Victor Company of Japan, Limited

ENGLISH

This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.

ESPAOL

Esta unidad est diseada para funcionar con 12 V de CC, con sistemas elctricos de masa NEGATIVA. Si su vehculo no posee este sistema, ser necesario un inversor de tensin, que puede ser adquirido en los concesionarios de JVC de equipos de audio para automviles.

FRANAIS

Cet appareil est conu pour fonctionner sur des sources de courant continu de 12 V masse NEGATIVE. Si votre vhicule noffre pas ce type dalimentation, il vous faut un convertisseur de tension, que vous pouvez acheter chez un revendeur dautoradios JVC.

WARNINGS

DO NOT install any unit in locations where; it may obstruct the steering wheel and gearshift lever operations. it may obstruct the operation of safety devices such as air bags. it may obstruct visibility. DO NOT operate the unit while driving. If you need to operate the unit while driving, be sure to look ahead carefully. The driver must not watch the monitor while driving. If the parking brake is not engaged, DRIVER MUST NOT WATCH THE MONITOR WHILE DRIVING. appears on the monitor, and no playback picture will be shown. This warning appears only when the parking brake wire is connected to the parking brake system built in the car.

ADVERTENCIAS

NO instale la unidad en los siguientes sitios; puede obstaculizar las maniobras del volante de direccin y de la palanca de cambios. puede obstaculizar la operacin de los dispositivos de seguridad, como por ejemplo, bolsas de aire. Donde pueda obstruir la visibilidad. NO opere la unidad mientras maneja. Si es necesario operar la unidad mientras maneja, asegrese de no apartar la vista de la carretera. El conductor no debe mirar el monitor mientras conduce. Si no est aplicado el freno de estacionamiento, aparecer en el monitor EL CONDUCTOR NO DEBE MIRAR EL MONITOR MIENTRAS CONDUCE., y no se mostrar la imagen de reproduccin. Esta advertencia aparece nicamente cuando el cable del freno de estacionamiento se encuentra conectado al sistema del freno de estacionamiento incorporado al automvil.

AVERTISSEMENTS

NINSTALLEZ aucun lment dans les endroits suivants; Il peut gner lutilisation du volant ou du levier de vitesse. Il peut gner le fonctionnement de dispositifs de scurit tels que les coussins de scurit. o il peut gner la visibilit. NE manipulez pas lappareil quand vous conduisez. Si vous devez commander lappareil pendant que vous conduisez, assurez-vous de bien regarder devant vous. Le conducteur ne doit pas regarder le moniteur lorsquil conduit. Si le frein de stationnement nest pas mis, LE CONDUCTEUR NE DOIT PAS REGARDER LE MONITEUR EN CONDUISANT. apparat sur le moniteur et limage de lecture napparat pas. Cet avertissement apparat uniquement quand le fil du frein de stationnement est connect au systme de frein de stationnement intgr la voiture.
To prevent short circuits, we recommend that you disconnect the batterys negative terminal and make all electrical connections before installing the unit. Be sure to ground this unit to the cars chassis again after installation. Notes: Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC car audio dealer. It is recommended to connect to the speakers with maximum power of more than 50 W (both at the rear and at the front, with an impedance of 4 to 8 ). If the maximum power is less than 50 W, change AMP GAIN setting to prevent the speakers from being damaged (see page 29 of the INSTRUCTIONS). To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape. The heat sink becomes very hot after use. Be careful not to touch it when removing this unit.

A travs de los terminales analgicos (salida de altavoz/ LINE OUT/2nd AUDIO OUT): Se emite la seal de 2 canales. Cuando se reproduce un disco codificado multicanal, las seales multicanal se mezclan. (AUDIOMEZCLA: consulte la pgina 31 del MANUAL DE INSTRUCCIONES).
propos des sons reproduits par les prises arrire
Par les prises analogiques (sortie des enceintes/LINE OUT/2nd AUDIO OUT): Un signal deux canaux est mis. Lors de la lecture dun disque cod multicanaux, les signaux multicanaux sont sous-mixs. (AUDIOMIXAGE DEMULTIPLICATION: voir page 31 du MANUAL DINSTRUCTIONS).
Through DIGITAL OUT (optical): Digital signals (Linear PCM, Dolby Digital*1, DTS*2, MPEG Audio) are emitted through this terminal. (For more details, see page 38 of the INSTRUCTIONS.) To reproduce multi-channel sounds such as Dolby Digital and DTS, connect an amplifier or a decoder compatible with these multi-channel sources to this terminal, and set DIGITAL AUDIO OUTPUT correctly. (See page 31 of the INSTRUCTIONS.)
A travs de DIGITAL OUT (ptico): Par la prise DIGITAL OUT (optique): Las seales digitales (PCM Lineal, Dolby Digital*1, DTS*2, MPEG Les signaux numriques (Linear PCM, Dolby Digital*1, DTS*2, Audio) se emiten a travs de este terminal. (Para mayor informacin, MPEG Audio) sont mis par cette prise. (Pour plus de dtails, voir consulte la pgina 38 del MANUAL DE INSTRUCCIONES). page 38 du MANUAL DINSTRUCTIONS). Para reproducir sonidos multicanal, como Dolby Digital y DTS, Pour reproduire des sons multicanaux, tels que le Dolby Digital conectar a este terminal un amplificador o decodificador compatible et le DTS, connectez un amplificateur ou un dcodeur compatible con estas fuentes multicanal, y ajustar SALIDA DE AUDIO al valor avec ces sources multicanaux cette prise, et rglez SORTIE correcto. (Consulte la pgina 31 del MANUAL DE INSTRUCCIONES). AUDIO NUM. sur la valeur correcte. (Voir page 31 du MANUAL DINSTRUCTIONS). *1 Fabricado bajo licencia de Dolby Laboratories. Dolby y el smbolo de la doble D son marcas comerciales de Dolby Laboratories. *2 DTS y DTS 2.0 + Digital Out son marcas comerciales de Digital Theater Systems, Inc. *1 Fabriqu sous licence de Dolby Laboratories. Le terme Dolby et le sigle double D sont des marques commerciales de Dolby Laboratories. *2 DTS et DTS 2.0 + Digital Out sont des marques de commerce de Digital Theater Systems, Inc.
*1 Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. *2 DTS and DTS 2.0 + Digital Out are trademarks of Digital Theater Systems, Inc.

TROUBLESHOOTING

The fuse blows. * Are the red and black leads connected correctly? Power cannot be turned on. * Is the yellow lead connected? No sound from the speakers. * Is the speaker output lead short-circuited? Sound is distorted. * Is the speaker output lead grounded? * Are the terminals of L and R speakers grounded in common? Noise interfere with sounds. * Is the rear ground terminal connected to the cars chassis using shorter and thicker cords? Unit becomes hot. * Is the speaker output lead grounded? * Are the terminals of L and R speakers grounded in common? This unit does not work at all. * Have you reset your unit?

White with black stripe Blanco con rayas negras Blanc avec bande noire

White Blanco Blanc

Gray with black stripe Gris con rayas negras Gris avec bande noire

Gray Gris Gris

Green with black stripe Verde con rayas negras Vert avec bande noire

Green Verde Vert

Purple with black stripe Prpura con rayas negras Violet avec bande noire
Purple Prpura Violet Right speaker (rear) Altavoz derecho (trasero) Enceinte droit (arrire)
Left speaker (front) Altavoz izquierdo (frontal) Enceinte gauche (avant)
Right speaker (front) Altavoz derecho (frontal) Enceinte droit (avant)
Left speaker (rear) Altavoz izquierdo (trasero) Enceinte gauche (arrire)
Connecting the parking brake wire / Conexin del cable del freno de estacionamiento / Connexion du cordon de frein de stationnement
Al instalar el monitor en un lugar donde pueda ser visto por el conductor Conecte el cable del freno de estacionamiento al sistema de freno de estacionamiento del automvil. Lorsquon installe le moniteur un emplacement o il peut tre vu du conducteur Connectez le fil de frein de stationnement au systme de frein de stationnement.
When installing the monitor in a location where it can be seen by the driver Connect the parking brake wire to the parking brake system built in the car.
Parking brake Freno de estacionamiento Frein de stationnement
Parking brake wire (light green) Cable del freno de estacionamiento (verde claro) Fil du frein de stationnement (vert clair)
Parking brake switch (inside the car) Interruptor del freno de estacionamiento (dentro del automvil) Commutateur de frein de stationnement (intrieur de la voiture)
To metallic body or chassis of the car A un cuerpo metlico o chasis del automvil Vers corps mtallique ou chssis de la voiture
When installing the monitor in a location where it cannot be seen by the driver Connect the parking brake wire to metallic body or chassis or the car.
Al instalar el monitor en un lugar donde no pueda ser visto por el conductor Conecte el cable del freno de estacionamiento a la carrocera metlica o al chasis del automvil.
Lorsquon installe le moniteur un emplacement o il ne peut pas tre vu du conducteur Connectez le fil du frein de stationnement au corps mtallique ou chssis du vhicule. *3 Not supplied for this unit. *3 No suministrado con esta unidad. *3 Non fourni avec cet appareil.

Introduction.. 4 OPERATIONS Basic operations Control panel.. 6 Remote controller (RM-RK230). 7 Listening to the radio.. 10 Disc operations... 11 EXTERNAL DEVICES Listening to the USB memory. 19 Listening to the CD changer.. 20 Listening to the satellite radio. 21 Listening to the iPod/D. player.. 23 Listening to the other external components.. 24 Dual Zone operations.. 25 SETTINGS Selecting a preset sound mode. 26 General settings PSM.. 27 Disc setup menu.. 30 Assigning names to the sources. 33 Maintenance.. 34 More about this unit.. 35 Troubleshooting.. 39 Specifications.. 44
How to use functions mode
If you press MODE, the unit goes into functions mode, then the number buttons and 5/ buttons work as different function buttons.

[Within 5 seconds.]

For safety.
Do not raise the volume level too much, as this will block outside sounds, making driving dangerous. Stop the car before performing any complicated operations.
Temperature inside the car.
If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.
EN02-05_KD-ADV6270[J]2.indd 3

12/22/05 1:03:07 PM

WARNINGS: To prevent accidents and damage

CONTENTS

Introduction

Disc type

Recording format, file type, etc
DVD-Video DVD-Audio DVD-ROM DVD-Video DivX Video MPEG-1/MPEG-2 Video MP3/WMA/WAV JPEG DVD-VR, +VR All DVD side Non-DVD side Audio CD (CD-DA), DTS-CD VCD (Video CD) CD-Text CD-ROM CD-I (CD-I Ready) CD-DA, DTS-CD DivX Video, VCD (Video CD) MPEG-1/MPEG-2 Video MP3/WMA/WAV JPEG

Playable

DVD Recordable/Rewritable (DVD-R*1/-RW, +R/+RW*2)

DVD-RAM Dual Disc CD/VCD

CD Recordable/Rewritable (CD-R/-RW) Compliant to ISO 9660 level 1, level 2, Romeo, Joliet
*1 DVD-R recorded in multi-border format is also playable (except for dual layer discs). *2 It is possible to play back finalized +R/+RW (Video mode only) discs. However, the use of +R double layer disc on this unit is not recommended.
Caution for DualDisc playback
The Non-DVD side of a DualDisc does not comply with the Compact Disc Digital Audio standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.
Note on Region Code: DVD players and DVD Video discs have their own Region Code numbers. This unit can only play back DVD discs whose Region Code numbers include 1.
Caution on volume setting
Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. If you insert a DVD Video disc of an incorrect Region Code REGION CODE ERROR! appears on the monitor.
EN02-05_KD-ADV6270[J]2.indd 4

12/22/05 6:42:17 PM

Before operating the unit Cancel the display demonstration and set the clock

When the power is turned off: Check the current clock time When the power is turned on: Change the display information
Turn on the power. Enter the PSM settings. Cancel the display demonstrations
Select DEMO, then DEMO OFF.

Set the clock

Select CLOCK H (hour), then adjust the hour. Select CLOCK M (minute), then adjust the minute.

Finish the procedure.

How to detach/attach the control panel

Detaching. Attaching.

Lever CAUTION: The lever comes out if you pressed the 0 button while the panel is detached. If this happens, push the lever back into lock position before attaching the panel.
EN02-05_KD-ADV6270[J]2.indd 5

12/22/05 9:28:02 AM

See also page 28.
Basic operations Control panel

Select the source.

FM/AM = SIRIUS* = XM* = DISC* = USB* = CD-CH*/IPOD*/D.PLAYER* (or EXT IN) = LINE IN = (back to the beginning) * You cannot select these sources if they are not ready.
Turn on the power. Turn off the power [Hold]. Attenuate the sound (if the power is on). Volume control [Turn]
USB input terminal FM/AM/SIRIUS/XM: Select the bands. DISC: Start playback. Change the display information Select the sound mode. Display window Eject disc.

Detach the panel.

FM/AM/SIRIUS/XM: Select preset station/channel. DISC: Select chapter/title/folder/ track/disc (for CD changer).

Adjust the sound mode.

Hold to enter the PSM settings.
FM/AM/SIRIUS/XM: Search for station/channel. DISC: Select chapter/track. IPOD/D.PLAYER: Select track.

Enter functions mode.

Press MODE, then one of the following buttons (within 5 seconds). MO: Turn on/off monaural reception. SSM: Automatic station presetting. DUAL: Activate/deactivate Dual Zone. RPT: Select repeat play. RND: Select random play. 5/: Skip 10 chapters/tracks.
FM/AM: Select preset station. SIRIUS/XM: Select category. DISC: Select title/folder. IPOD/D.PLAYER: Enter the main menu/Pause or stop playback/ Confirm selection.
EN06-11_KD-ADV6270[J]2.indd 6

12/22/05 9:29:48 AM

Display window
(Time, menu, playback information)
Tuner reception indicators Track information indicators

Dual Zone indicator

Loudness indicator Track indicator

Disc type indicators

Equalizer indicator
Playback mode/item indicators (Random/Repeat) Sound mode indicators
also functions as level meter (see also page 28).
Playback source indicators
Basic operations Remote controller (RM-RK230)
Installing the lithium coin battery (CR2025)
Warning: To prevent accidents and damage
Do not install any battery other than CR2025 or its equivalent. Store the battery in a place where children cannot reach. Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire. Do not leave the battery with other metallic materials. Do not poke the battery with tweezers or similar tools. Wrap the battery with tape and insulate when throwing away or saving it.

Before using the remote controller: Aim the remote controller directly at the remote sensor on the unit. DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting).

Remote sensor

Continued on the next page

OPERATIONS

12/22/05 9:29:54 AM
EN06-11_KD-ADV6270[J]2.indd 7

Main display

Source display/Preset No./Track No./Folder No./Disc No./Chapter No.
IMPORTANT: If Dual Zone is activated (see page 25), the remote controller only functions for operating the DVD/CD player.
8*1 Enters disc setup menu. 9 SHIFT button p 7 (stop), 3 (play), 8 (pause) 3 (play) also function as ZOOM button when pressed with SHIFT button (see page 14). Not applicable for CD changer/iPod/ D. player operations. q*2 For advanced disc operations: /TITLE 5 / DVD-Video: Selects the titles. DivX/MPEG Video/MP3/WMA/WAV: Selects the folders if included. 4 / : Reverse skip/forward skip. 1 / : Reverse search/forward search. For FM/AM tuner operations: PRESET 5 / Changes the preset stations. 4/ Searches for the stations. For SIRIUS/XM radio operations: PRESET 5 / Changes the categories. 4/ Changes the channels if pressed briefly. Changes the channels rapidly if pressed and held.
MONITOR CONTROL 1 Monitor control buttons Used for a JVC monitorKV-MR9010, KV-MH6510, or KV-M706. DVD/RECEIVER CONTROL 2 Turns on/off the power. Attenuates the sound if the power is on. 3 Selects the source. 4 Selects the FM/AM/SIRIUS/XM bands. 5*1 DVD-Video/DivX: Shows disc menu. VCD: Starts PBC playback. 6 Activates or deactivates Dual Zone. 7 Adjusts the volume level. Also function as 2nd VOL when pressed with SHIFT button (see page 25).
For Apple iPod/JVC D. player operations: 5/ : Pauses/stops or resumes playback. 5: Enters the main menu. (Now 5//4 / work as the menu selecting buttons.)*/ (in menu selecting mode) Selects an item if pressed briefly. (Then, press to confirm the selection.) Skips 10 items at a time if pressed and held. 4/ Press: Reverse skip/forward skip. Hold: Reverse search/forward search.

Open the control panel and insert the disc. Start playback if necessary.
Playback starts automatically.
Prohibiting disc ejection
To cancel the prohibition, repeat the same procedure.
*1 If the file does not have Tag information or TAG DISP is set to TAG OFF (see page 29), folder name and file name appear. TAG indicator will not light up. *2 NO NAME appears for an audio CD. Continued on the next page

12/22/05 9:30:00 AM

EN06-11_KD-ADV6270[J]2.indd 11
Operations using the control panel
Pressing (or holding) the following buttons allows you to.

(Number buttons)

Press: Select chapter Select title Hold: Reverse/fast-forward chapter*1 Press: Select track Hold: Reverse/fast-forward track*1 Press: Select track Select folder Hold: Reverse/fast-forward track*2 Press: Select track Select folder Hold: Reverse/fast-forward track*1 Press: Select track Hold: Reverse/fast-forward track*1
*1 Search speed changes to *2 Search speed changes After pressing on the monitor. on the monitor. , press the following buttons to.
During stop: Locate title During play/pause: Locate chapter Locate particular track directly (PBC not in use) Locate particular folder directly
Locate particular folder directly
Locate particular track directly
Skip 10 chapters (during play or pause) CHP RPT: Repeat current chapter TIT RPT: Repeat current title Skip 10 tracks (PBC not in use) TRK RPT: Repeat current track DISC RND: Randomly play all (PBC not in use) tracks (PBC not in use) Skip 10 tracks (within the TRK RPT: Repeat current track same folder) FLDR RPT: Repeat current folder Skip 10 tracks (within the same folder) TRK RPT: Repeat current track FLDR RND: Randomly play all FLDR RPT: Repeat current folder tracks of current folder, then tracks of next folders DISC RND: Randomly play all tracks TRK RPT: Repeat current track DISC RND: Randomly play all tracks 12

Skip 10 tracks

To cancel repeat play or random play, select RPT OFF or RND OFF.
EN12-19_KD-ADV6270[J]f.indd 12

12/30/05 4:11:04 PM

Operations using the remote controllerRM-RK230
: Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play (10-second review if pressed during play.) : Reverse/forward chapter search*1 Slow motion during pause. No sound can be heard.*2 : Press: Select chapter (during play or pause) Hold: Reverse/fast-forward chapter search : Select title : Select audio language : Select subtitle language : Select view angle While holding.*3 : Select chapter (during play or pause) Select title (when stop) , then : Select title directly
Using menu driven features.
1 / 2 Select an item you want to start play. 3
: Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play : Reverse/forward chapter search*1 Slow motion during pause. No sound can be heard.*2 Reverse slow motion does not work. : Press: Select track Hold: Reverse/fast-forward track search : Select audio channel (ST: stereo, L: left, R: Right)

On-screen bar

Ex.: DVD-Video

Information Operation

1 Disc type 2 DVD-Video/DTS-CD: Audio signal format type

6 Playback status

3 Playback mode
and channel PBC T. RPT: C. RPT: T. RPT: D. RND: T. INT: T. RPT: F. RPT: Title repeat Chapter repeat Track repeat Disc random Track intro*3 Track repeat Folder repeat

DVD-Video: VCD*1:

DivX/MPEG Video:

4 Playback information

Current title/chapter Current track Current folder/track 5 Time indication Elapsed playing time of the disc (For DVD-Video, elapsed playing time of the current title.) DVD-Video: Remaining title time VCD: Remaining disc time Elapsed playing time of the current chapter/track Remaining time of the current chapter/track
Play Forward/reverse search Forward/reverse slow-motion Pause Stop 7 Operation icons Change time indication (see 5) Time Search (Enter the elapsed playing time of the current title or of the disc.) Title Search (by its number) Chapter Search (by its number) Track Search (by its number) Change the audio language or audio channel Change the subtitle language Change the view angle Repeat play*2 Intro play*3 Random play*2
*1 While PBC is not in use. *2 For repeat play/random play, see also page 12. *3 Plays the beginning 15 seconds of. TRACK INTRO: All tracks of the current disc. FOLDER INTRO: First tracks of all folders of the current disc.
EN12-19_KD-ADV6270[J]2.indd 16

12/22/05 9:29:13 AM

Operations using the control screen (DivX/MPEG Video/MP3/WMA/WAV/CD)
~ Show the control screen.
DivX/MPEG Video: Press during play. MP3/WMA/WAV/CD: Automatically appear when you insert a disc.
Select Folder column or Track column (except for CD). ! Select a folder or track. Start playback.
DivX/MPEG Video: Press. MP3/WMA/WAV/CD: Playback starts automatically.

Control screen

2 Select a playback mode.

3 Select an item.

REPEAT/INTRO: RANDOM:
*1 Not selectable for DivX/MPEG Video *2 Not selectable for CD Ex.: MP3/WMA/WAV disc Current folder number/total folder number Folder list with the current folder selected Selected playback mode Elapsed playing time of the current track Operation mode icon ( , 7, 8, , 1 ) Current track number/total number of tracks in the current folder (total number of tracks on the disc) Track information Track list with the current track selected

Playback mode

F. RPT (folder repeat): Repeat current folder T. RPT (track repeat): F. INT (folder intro): Repeat current track Plays the beginning 15 seconds of first tracks of all folders of the current disc Plays the beginning 15 seconds of all tracks of the current disc

T. INT (track intro):

To select a playback mode
1 While control screen is displayed.
D. RND (disc random): Randomly play all tracks F. RND (folder random): Randomly play all tracks of current folder, then tracks of next folders
Playback mode selection screen appears on the folder list section of the control screen.

12/22/05 6:43:13 PM

EN12-19_KD-ADV6270[J]2.indd 17
Operations using the list screen (DivX/MPEG Video/MP3/WMA/WAV)
These operations are possible on the monitor using the remote controller. Before playing, you can display the folder list/track list to confirm the contents and start playing a track.
~ Display the folder list while stop. Select an item from the folder list.
Track list of the selected folder appears. To go back to the previous screen, press
! Select a track to start playing.
MP3/WMA/WAV: Control screen appears (see page 17).

List screen

Ex.: Folder list 1 Current folder number/total folder number 2 Current track number/total number of tracks in the current folder 3 Current page/total number of the pages included in the list 4 Current folder/track (highlighted bar)

12/30/05 4:14:02 PM

EN12-19_KD-ADV6270[J]f.indd 18
Listening to the USB memory
While the power is on. USB input terminal

USB memory

This unit can play MP3/WMA tracks stored in a USB memory. All tracks in the USB memory will be played repeatedly until you change the source. Removing the USB memory will also stop playback. To detach the USB memory, straightly pull it out from the unit.
After pressing buttons to.

, press the following

Skip 10 tracks (within the same folder)
TRK RPT: Repeat current track FLDR RPT: Repeat all tracks of current folder FLDR RND: Randomly play all tracks of the current folder, then tracks of the next folder DISC RND: Randomly play all tracks of the USB memory

Cautions:

Avoid using the USB memory if it might hinder your safety driving. Make sure all important data have been backed up to avoid losing the data.
Press: Select track Hold: Reverse/fast-forward track Select folders
Select particular folder directly (Number buttons)
* If the file does not have Tag information or TAG DISP is set to TAG OFF (see page 29), folder name and file name appear. TAG indicator will not light up.

EXTERNAL DEVICES

12/22/05 9:29:19 AM
EN12-19_KD-ADV6270[J]2.indd 19
Listening to the CD changer

(see page 11)

DST*1, *2 Daylight savings time SID SIRIUS ID

LEVEL Level meter DIMMER

ON [Initial] OFF AUTO [Initial] ON OFF MUTING 1/ MUTING 2 OFF [Initial] ONCE [Initial] AUTO OFF
TEL*4 Telephone muting SCROLL*5
EN26-33_KD-ADV6270[J]f.indd 28

1/12/06 9:58:46 AM

WOOFER Subwoofer cutoff frequency HPF High pass filter
LOW MID [Initial] HIGH HPF ON
: Frequencies lower than 85 Hz are sent to the subwoofer. : Frequencies lower than 125 Hz are sent to the subwoofer. : Frequencies lower than 165 Hz are sent to the subwoofer. : The cut-off frequency is chosen automatically according to the WOOFER setting (LOW/MID/HIGH) so that you can enjoy the bass sound purely from the subwoofer if it is connected. : Cancels. : To use a JVC CD changer, [20], a JVC compatible satellite (SIRIUS/XM), [21], or an Apple iPod/a JVC D. player, [23]. : To use any other external component than the above, [24]. : Shows the tag while playing MP3/WMA/WAV tracks. : Cancels. : Select this to turn on the rear speaker output. : Cancels.
HPF OFF [Initial] EXT IN* External input

CHANGER [Initial] EXT IN

TAG DISP Tag display REAR SPK*7 Rear speaker output AMP GAIN Amplifier gain control
TAG ON [Initial] TAG OFF ON [Initial] OFF LOW PWR
: VOL 00 VOL 30 (Select if the maximum power of each speaker is less than 50 W to prevent the speaker from being damaged.) HIGH PWR [Initial] : VOL 00 VOL 50 OFF*4 : Deactivates the built-in amplifier. : Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) : Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. : When using in North/Central/South America. AM/FM intervals are set to 10 kHz/200 kHz. : When using in South American countries where FM interval is 100 kHz. AM interval is set to 10 kHz. : When using in any other areas. AM/FM intervals are set to 9 kHz/50 kHz (100 kHz during auto search).
IF BAND AUTO [Initial] Intermediate frequency filter WIDE AREA Tuner channel interval AREA US [Initial] AREA SA AREA EU

*1 *2 *3 *4 *5 *6 *7

Displayed only when SIRIUS Satellite radio or XM Satellite radio is connected. Displayed only when CLK ADJ is set to AUTO. Displayed only when SIRIUS Satellite radio is connected. Only for KD-ADV6270. Some characters or symbols will not be shown correctly (or will be blanked) on the display. Displayed only when one of the following sources is selectedFM, AM, CD, DISC, USB,or LINE IN. Displayed only when Dual Zone is activated (see page 25).

12/22/05 1:05:31 PM

EN26-33_KD-ADV6270[J]2.indd 29

Disc setup menu

~ Enter the disc setup menu while

Select a menu.

! Select an item you want to set
To cancel pop-up menu, press.

Select an option.

To return to normal screen

MENU LANGUAGE

Setting
Select the initial disc menu language. Refer also to Language codes on page 32. Select the initial audio language. Refer also to Language codes on page 32. Select the initial subtitle language or remove the subtitle (OFF). Refer also to Language codes on page 32. Select the language for the on screen display.

LANGUAGE

AUDIO LANGUAGE SUBTITLE ON SCREEN LANGUAGE
EN26-33_KD-ADV6270[J]f.indd 30

12/30/05 4:20:19 PM

MONITOR TYPE
Select the monitor type to watch a wide screen picture on your monitor.

PICTURE

OSD POSITION
Select the on-screen bar position on the monitor. 1 : Higher position 2 : Lower position (Guidance below the disc setup menu will disappear.) Select the file type to play. AUDIO VIDEO : Play MP3/WMA/WAV files. : Play DivX/MPEG Video files.

FILE TYPE

DIGITAL AUDIO OUTPUT
Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal. OFF : Cancels. PCM ONLY : Select for an amplifier or a decoder incompatible with Dolby Digital, DTS, MPEG Audio, or connecting to a recording device. DOLBY DIGITAL/PCM : Select for an amplifier or a decoder compatible with Dolby Digital. STREAM/PCM : Select for an amplifier or a decoder compatible with Dolby Digital, DTS, and MPEG Audio. When playing back a multi-channel disc, this setting affects the signals reproduced through the LINE OUT jacks (and through the DIGITAL OUT terminal when PCM ONLY is selected for DIGITAL AUDIO OUTPUT). SURROUND COMPATIBLE : Select to enjoy multi-channel surround audio by connecting an amplifier compatible with Dolby Surround. STEREO : Normally select this. You can enjoy a powerful sound at low or middle volume levels while playing a Dolby Digital software. AUTO : Select to apply the effect to multi-channel encoded software (excluding 1-channel and 2-channel software). ON : Select to always use this function. This unit has its own Registration Code. Once you have played back a disc in which the Registration Code recorded, this units Registration Code is overwritten for copyright protection.

DOWN MIX

To keep discs clean

A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.

To play new discs

Connector New discs may have some rough spots around the inner and outer edges. If such a disc is used, this unit may reject the disc. To remove these rough spots, rub the edges with a pencil or ball-point pen, etc.

Moisture condensation

Moisture may condense on the lens inside the DVD/CD player in the following cases: After starting the heater in the car. If it becomes very humid inside the car. Should this occur, the DVD/CD player may malfunction. In this case, eject the disc and leave the unit turned on for a few hours until the moisture evaporates.
Do not use the following discs: Warped disc Sticker

How to handle discs

When removing a disc from Center holder its case, press down the center holder of the case and lift the disc out, holding it by the edges. Always hold the disc by the edges. Do not touch its recording surface. When storing a disc into its case, gently insert the disc around the center holder (with the printed surface facing up). Make sure to store discs into the cases after use.

Sticker residue

Stick-on label
EN34-39_KD-ADV6270[J]2.indd 34 12/22/05 9:28:36 AM

More about this unit

General

Turning on the power

By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback starts.

Ejecting a disc

If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (Disc will not play this time.)

Turning off the power

If you turn off the power while listening to a disc, disc play will start automatically, next time you turn on the power.
Playing Recordable/Rewritable discs
This unit can recognize a total of files and 250 folders (a maximum of 999 files per folder). This unit can recognize a total 25 characters for file/folder names. Use only finalized discs. This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing. This unit may be unable to play back some discs or files due to their characteristics or recording conditions. Rewritable discs may require a longer readout time.
Storing stations in memory
During SSM search. Received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency). When SSM is over, the station stored in No. 1 will be automatically tuned in. When storing stations, the previously preset stations are erased and stations are stored newly.
Playing MP3/WMA/WAV files
In this manual, words track and file are interchangeably used when referring to DivX/ MPEG Video/MP3/WMA/WAV files and their file names. This unit can also playback 8 cm (3-3/16) discs. This unit can only playback audio CD (CD-DA) files if different type of files are recorded in the same disc.

Inserting a disc

When a disc is inserted upside down, PLEASE and EJECT appear alternately on the display. Press 0 to eject the disc.
The maximum number of characters for folder and file names is 25 characters; 128 characters for MP3/WMA tag information. This unit can play back the files with the extension code <.mp3>, <.wma>, or <.wav> (regardless of the letter caseupper/lower). This unit can show the names of albums, artists (performer), and Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for the MP3/WMA/WAV files. This unit can display only one-byte characters. No other characters can be correctly displayed. This unit can play back files recorded in VBR (variable bit rate). Files recorded in VBR have a discrepancy in elapsed time indication.
EN34-39_KD-ADV6270[J]f.indd 35 12/30/05 5:09:28 PM
This unit cannot play back the following files: MP3 files encoded with MP3i and MP3 PRO format. MP3 files encoded with Layer 1/2. WMA files encoded with lossless, professional, and voice format. WMA files which are not based upon Windows Media Audio. WMA files copy-protected with DRM. Files which have the data such as ATRAC3, etc. AAC files and OGG files.

Playing a USB memory

While playing from a USB memory, the playback order may differ from other players. This unit may be unable to play back some USB memories or some files due to their characteristics or recording conditions. It is not recommended to use a USB memory wider than 20 mm (13/16") as it will block you from pressing the 0 button. This unit can play back MP3 files recorded in VBR (variable bit rate).

Playing DivX files

This unit can play back DivX files with the extension code <.divx>, <.div>, <.avi> (regardless of the letter caseupper/lower). This unit supports DivX 6.x, 5.x, 4.x, and 3.11. This unit supports DivX Media Format files, <.divx> or <.avi>. This unit can display a unique registration codeDivX Video on Demand (DRM Digital Rights Management). For activation and more details, visit <www.divx.com/vod>. Audio stream should conform to MP3 or Dolby Digital. This unit does not support GMC (Global Motion Compression). The file encoded in the interlaced scanning mode may not be played back correctly. This unit cannot playback the following files: Files encoded in Codec (Compressordecompressor) other than DivX Codec.

Changing the source

If you change the source, playback also stops (without ejecting the disc). Next time you select DISC for the playback source, disc play starts from where it has been stopped previously.

Satellite radio

You can also connect the JVC SIRIUS radio PnP (Plug and Play), using the JVC SIRIUS radio adapter, KS-U100K (not supplied) to the CD changer jack on the rear. By turning on/off the power of the unit, you can turn on/off the JVC PnP. However, you cannot control it from this unit. To know more about SIRIUS Satellite radio or to sign up, visit http://www.sirius.com. For the latest channel listings and programming information, or to sign up for XM Satellite radio, visit http://www.xmradio. com.

Playing MPEG Video files

This unit can play back MPEG Video files with the extension code <.mpg> or <.mpeg>. Audio stream should conform to MPEG1 Audio Layer 2. This unit cannot playback the following files: WMV (Windows Media Video) files. RM (Real Media) format files.

iPod or D. player

When you turn on this unit, the iPod or D. player is charged through this unit. While the iPod or D. player is connected, all operations from the iPod or D. player are disabled. Perform all operations from this unit. The text information may not be displayed correctly. If the text information includes more than 8 characters, it scrolls on the display (see also page 28). This unit can display up to 40 characters.
EN34-39_KD-ADV6270[J]2.indd 36 12/27/05 8:59:32 AM
Notice: When operating an iPod or a D. player, some operations may not be performed correctly or as intended. In this case, visit the following JVC web site: For iPod users: <http://www.jvc.co.jp/ english/car/support/ks-pd100/index.html> For D. player users: <http://www.jvc.co.jp/ english/car/support/ks-pd500/index.html>

On-screen guide icons

DVD: Appears at the beginning of a scene containing: : Multi-subtitle languages : Multi-audio languages : Multi-angle views

Title assignment

If you try to assign titles to more than 30 station frequencies or 30 CDs, NAMEFULL appears. Delete unwanted titles before assignment. Titles assigned to CDs in the CD changer can also be shown if you play back the disc from the unit and vice versa.
Playback Pause : DVD-Video/VCD: Forward slow motion : DVD-Video: Reverse slow motion : Forward search : Reverse search

General settingsPSM

If you change the AMP GAIN setting from HIGH PWR to LOW PWR while the volume level is set higher than VOL 30, the unit automatically changes the volume level to VOL 30.

NO FILE flashes on the display.

USB memory playback

NOT SUPP appears on the display and track skips. READ and FAILED appear alternately on the display, then returns to the previous source.
Correct characters are not displayed (e.g. album name). While playing a track, sound is sometimes interrupted. NO DISC appears on the display.

CD changer

NO MAG appears on the display. RESET 8 appears on the display.
RESET 1 RESET 7 appears on the display. Press the reset button of the CD changer. The CD changer does not work at all. Reset the unit (see page 2).
EN40-45_KD-ADV6270[J]f.indd 41 12/30/05 4:22:40 PM
Starts subscribing to SIRIUS Satellite radio (see page 21).
CALL 1-888-539-SIRIUS TO SUBSCRIBE scrolls on the display while listening to the SIRIUS Satellite radio. No sound can be heard. UPDATING appears on the display. Either NO SIGNAL scrolls or NO SIGNL appears on the display. Either NO ANTENNA scrolls or ANTENNA appears on the display. NO CH appears on the display for about 5 seconds, then returns to the previous display while listening to the SIRIUS Satellite radio.
The unit is updating the channel information and it takes a few minutes to complete. Move to an area where signals are stronger. Connect the antenna firmly. No broadcast on the selected channel. Select another channel or continue listening to the previous channel.
NO (information)* scrolls on the display No text information for the selected channel. while listening to the SIRIUS Satellite radio. --- appears on the display while listening to the XM Satellite radio. --- appears on the display for about 2 Selected channel is no longer available or is unauthorized. seconds, then returns to the previous channel Select another channel or continue listening to the previous while listening to the XM Satellite radio. channel. OFF AIR appears on the display while listening to the XM Satellite radio. LOADING appears on the display while listening to the XM Satellite radio. RESET 8 appears on the display. Satellite radio does not work at all. Selected channel is not broadcasting at this time. Select another channel or continue listening to the previous channel. The unit is loading the channel information and audio. Text information are temporarily unavailable. Reconnect this unit and the satellite radio correctly and reset this unit.