Specifications

MODEL GENERAL

MSP7 STUDIO
Type Crossover Frequency Biamp 2-way Powered Speaker 2.5 kHz LF: 30 dB/oct, HF: 30 dB/oct 45 Hz - 40 kHz (-10 dB) 106 dB, 1 m on Axis 218 x 330 x 235 mm 12.2 kg Yes 6.5" cone 1.0" Titanium dome Bass-Reflex PP 80 W THD = 0.05 %, RL = W THD = 0.05 %, RL = dB, LEVEL = Max +4 dBu, LEVEL = Center -6 dBu, LEVEL = Max XLR-3-31 (balanced), 10 k LEVEL control LOW CUT switch HIGH TRIM LOW TRIM POWER switch PHASE switch LPF control LED 31 Positions Detent type VR (Min = - Attenuation) FLAT/80 Hz (12 dB/oct)/ 100 Hz (12 dB/oct) +1.5/0/-1.5 dB at 15 kHz +1.5/0/-1.5/-3 dB at 45 Hz on/off Green: Power On Red: Clipping 100 W

MSP5 STUDIO

Biamp 2-way Powered speaker 2.5 kHz LF: 24 dB/oct, HF: 24 dB/oct 50 Hz - 40 kHz (-10 dB) 101 dB, 1 m on Axis 179 x 279 x 208 mm 7.9 kg Yes 5" cone 1.0" Titanium dome Bass-Reflex PP 40 W THD = 0.02 %, RL = W THD = 0.02 %, RL = dB, LEVEL = Max +4 dBu, LEVEL = Center -6 dBu, LEVEL = Max -10 dBu, LEVEL = Center -20 dBu, LEVEL = Max XLR-3-31 (balanced), 10 k PHONE (unbalanced), 10 k 31 Positions Detent type VR (Min = - Attenuation)

SW10 STUDIO

Powered subwoofer 25 Hz - 150 Hz (-10 dB) 111 dB, 1 m on Axis 328 x 459 x 476 mm 26.5 kg Yes (None covered type) 10" cone Bass-Reflex MDF 180 W f = 100 Hz, THD = 1 %, RL = 8 100 dB, LEVEL = Max +4 dBu, LEVEL = Center -6 dBu, LEVEL = Max XLR-3-31 x 3 (balanced), 10 k XLR-3-32 x 3 (balanced), Parallel connection with Input Center Click VR (Min = - Attenuation)
Overall Frequency Response Maximum Output Level Demensions (W x H x D) Weight Magnetic Shielding SPEAKER SECTION Components LF HF Enclosure Type Material AMPLIFIER SECTION Output Power * LF HF S/N, IHF-A filter Input Sensitivity

XLR-3-31 PHONE

APPLICATIONS

Stereo Setting

For both stereo and surround mixing your position in relation to the main front speakers the sweet spot as its often called should be one apex of an equilateral triangle. In other words your distance from either speaker should be the same as the distance between the two speakers. The speakers should also be toed in to the corresponding 60 angle so that the drivers are aimed directly at the listening position. The height of the speakers should be such that the tweeters are roughly
Input Connectors, Impedance Output Connectors Controls
POWERED SUBWOOFER POWERED SUBWOOFER
aligned with your ears (this is because high frequencies are the most directional).
Indicators Power Consumption
+1.5/0/-1.5 dB at 15 kHz +1.5/0/-1.5/-3 dB at 60 Hz on/off Green: Power On Red: Clipping 60 W
on/off Normal/Reverse 40-120 Hz, 80 Hz at Center Click Green: Power On Red: Clipping 160 W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V. * Specifications and appearance subject to change without notice.

Frequency Response

RESPONSE (dB)

Block Diagram

LOW CUT INPUT LEVEL FLAT 80Hz 100Hz LOW HIGH LOW CUT 1 INPUT 2 LEVEL HIGH CUT P.AMP LF LOW CUT TRIM P.AMP HF HIGH CUT P.AMP LF LOW CUT TRIM STEP FILTER LOW CUT P.AMP HF

Adding a Subwoofer

Even if you dont plan to set up a surround system, adding a subwoofer can be a real advantage for stereo mixing. If you cant hear the extreme low end theres not much you can do to make it sound great. The extended bass response provided by a good subwoofer can indeed help you to improve the overall quality of your mixes. The location of your subwoofer is not as critical as the main speakers, because frequencies below around 200 Hz the region your subwoofer will be working in arent directional. To say it another way, the ear cant locate the source of such low frequencies, so in theory the subwoofer can be placed anywhere in the room. In reality its a good idea to place the subwoofer on the floor somewhere between the main front speakers at the same distance from the listening position as the main speakers, but it doesnt have to be dead center.
-10 -20 -30 -500 1k 5k 10k 20k 40k

FREQUENCY (Hz)

+-10 -20 -30 -500 1k 5k 10k 20k 40k

L OUTPUT

P.AMP HIGH CUT PHASE SW EQ HIGH CUT

INPUT R OUTPUT

CUT OFF Freq. 120Hz 80Hz 40Hz

Surround Set up

INVERTER

INVERTER P.AMP

SPEAKER
According to the ITU (International Telecommunications Union) specifications for 5.1 surround setup, the main front speakers are positioned in the 60 equilateral triangle relationship to the listening position described earlier, and the rear speakers

LFE (Subwoofer)

INPUT SUBWOOFER OUTPUT
should be located at the same distance from the listening position, but at an angle of between 100 and 120, as shown in the diagram above. The center speaker should be placed precisely midway between the main front speakers, at the same distance from the listening position as the other speakers (which means that ideally it will be a bit behind the main left and right speakers).
100-120 Listening Position LS

100-120

For details please contact:

www.yamahaproaudio.com

Printed in Japan
This document is printed on chlorine-free (ECF) paper with soy ink.

LPA528

Refined Monitoring Precision
Yamahas STUDIO series monitors have been designed with serious monitoring in mind. Emphasis is on reference-quality reproduction precision that lets you hear sonic details, rather than flattering sound. They carry on in the tradition of the venerable NS10M STUDIO monitor speaker, which was the definitive near-field speaker monitor in an overwhelming majority of professional studios throughout the world for many years from the 80s onward. But technology has evolved dramatically right throughout the audio chain, and speakers must follow suit. The new top-of-the-line MSP7 STUDIO Powered Monitor Speaker is capable of delivering consistent quality and performance that you can rely on in modern production environments that handle any combination of digital and analog sources as well as stereo and surround formats.
Personal StudioMonitor HS series

Connectors and Controls

The MSP7 STUDIO features a balanced XLR-type connector for input. This provides direct compatibility with professional gear and allows the use of balanced lines for maximum audio quality even where long cable runs are required. Rear-panel controls include a continuous input sensitivity control, and trim switches that enable you to adjust the bass and treble in four and three positions, respectively (+1.5 dB/0 dB/-1.5 dB/-3 dB at 50 Hz and +1.5 dB/0 dB/-1.5 dB at 10 kHz), so that the systems response to be quickly matched to the room. Theres also a low cut (FLAT, 80 Hz, 100 Hz) switch that is useful when the MSP7 STUDIO is used with the SW10 STUDIO subwoofer. The AC power cord is removable for easy transportation and setup.

MSP5 STUDIO Powered Monitor Speaker
Like the larger MSP7 STUDIO, the MSP5 STUDIO is a two-way bi-amplified bassreflex system that delivers outstanding monitoring precision for digital or analog production in stereo or surround formats. The more compact dimensions of the MSP5 STUDIO make it an ideal choice for smaller project studios and DAW based production systems. The MSP5 STUDIO features a 5 inch cone woofer driven by a 40-watt amplifier and a 1 inch dome tweeter driven by a 27-watt amplifier. Other than woofer size, enclosure size, and amplifier power, the MSP5 STUDIO takes advantage of the same advanced materials and design technology that are behind the extraordinary performance of the MSP7 STUDIO. The woofer and titanium-dome tweeter feature advanced magnetic structures that achieve exceptionally low distortion, and the tweeter works with a unique waveguide horn that achieves broad, uniform high frequency dispersion over 120 degrees for optimum balance regardless of listening position. Advanced driver and enclosure design including the low-diffraction rounded baffle also ensure smooth, uniform dispersion across the systems full reproduction range. Flat frequency response out to 40 kHz makes the MSP5 STUDIO great for mastering, where high sample and bit rates are the norm.
Professional Studio Monitor MSP series

Accurate Hi Fidelity

Magnetically Shielded Enclosures
Along with their compact size and excellent performance, full magnetic shielding allows the MSP5 STUDIO speakers to be positioned near all types of audio, video, and computer equipment without sound degradation or negative effects on surrounding equipment.

8"

6.5"

5"

One-piece Molded Enclosure with Rounded Baffle
Wood can be good, but synthetic materials have advanced to the point where they offer some overwhelming advantages. In addition to the fact that enclosures materials can be created with ideal density and resonance characteristics, they can be molded to almost any shape with precise tolerances. Where wood cabinets have glued joints that interrupt the continuity of the enclosure, the thickwalled MSP7 STUDIO cabinet is molded in one piece, resulting in smooth acoustic transfer throughout the entire enclosure for superior reproduction precision. One-piece molding also makes it possible to produce the large-radius rounded baffle corners that help to maintain a natural wavefront and minimize diffraction for a smoother, more uniform polar response, as shown in the accompanying plots. Internal tweeter mounting also boosts high-frequency performance by eliminating spurious resonance from the tweeter frame.

Rear Panel

4"
Professional Connectivity
The MSP5 STUDIO has a balanced XLRtype input for direct compatibility with professional equipment. Balanced lines are ideal if the speakers are to be placed at the end of long cable runs which, if unbalanced, might be susceptible to hum and induced noise. The MSP5 STUDIO also offers an unbalanced 1/4" phone jack connector.

at Vers

ile fo

ed icat g Dedordin rec o

Utility
MSP7 STUDIO Powered Monitor Speaker
Powered for Uncompromised Quality
The trend towards choosing powered speakers for production monitoring is based on some very sound logic. By integrating and matching the power amplifiers and speakers, the relationship between them can be kept under perfect control for superior performance in the widest possible range of systems. Naturally the power amplifiers themselves are of the finest quality and, unlike component power amplifiers that must be designed for acceptable matching with the widest possible range of speakers, are designed and manufactured specifically to drive the systems woofer and tweeter in their specific enclosure. No matter where the MSP7 STUDIO monitors are used, and with what sources or other audio gear, you know that youre always receiving the benefits of a perfectly matched power amplifier and speaker system. Youll hear the difference. Youll also benefit from the convenience of not having to deal with external amplifiers and cabling.

Advanced Bi-amp Design

There are a number of advantages to multi-amp speaker setups, but the added cost and extra equipment required can make them impractical in many situations. With the MSP7 STUDIO everything you need is builtin all you have to do is supply the line-level input. The 6.5 inch cone woofer is driven by an 80-watt power amplifier, while the 1 inch dome tweeter has its own 50-watt power amplifier. In the MSP7 STUDIO this particular power and driver combination results in the perfect balance between the low-mid and high frequency ranges. The frequency ranges are divided via a carefully designed electronic crossover before the power amplifier inputs, featuring steep 30dB/octave roll-off curves in both the low- and high-pass filters. The steep roll-off minimizes inter-modulation between the frequency bands at the crossover point, achieving significantly smoother, cleaner crossover performance in the critical midrange. And the fact that the crossover is a linelevel electronic design completely eliminates the loss, distortion, and sometimes severe inter-modulation that are almost unavoidable in conventional passive crossover networks driven by a single power amplifier.
Details that Define Superior Performance
The MSP7 STUDIO woofer and tweeter units feature some important design innovations that contribute directly to improved sound quality. The 6.5 inch woofer, for example, features a specially treated polypropylene cone with lowdamping rubber surrounds for exceptionally smooth response. Low-reflection highrigidity die-cast magnesium baskets both maximize mechanical precision while minimizing unwanted coloration of the speakers output. The 1 inch tweeters feature titanium domes that offer the perfect combination of light weight and rigidity for precise reproduction right up to 40 kHz. The tweeters have a powerful magnetic circuit that results in extremely fast response for crisp, natural transients, and are integrated with a waveguide that achieves uniform high frequency dispersion of 120 degrees. But precision manufacturing makes a huge contribution to performance as well as basic materials and design. The slightest eccentricity in the alignment of the tweeter domes and waveguides, for example, can seriously affect performance. So can the alignment of the coils and magnetic circuits. These are details that require a considerable investment of energy and resources to do properly, and they are exactly the details that make the MSP7 STUDIO the superior studio monitor that it is.

Magnetic Shielding That Wont Distort Your Sound
In todays production environment, which often includes computer and video displays as well as a range of magnetic media, magnetic shielding is essential. Conventional magnetic shielding schemes have the unfortunate side effect of distorting the magnetic flux of the speakers critical magnetic circuit. The end result is distorted sound. This obstacle was effectively overcome in the MSP7 STUDIO with a new advanced magnetic structure that achieves effective shielding while maintaining the integrity of the speakers magnetic circuit for significantly lower distortion as well as an improved definition.
MSP7 STUDIO Advanced Magnetic structure
Trim Switches for Easy Room Matching
The MSP5 STUDIO is equipped with four position low and three position high trim switches that allow the systems response to be optimized for a wide range of acoustic environments.
Refined Looks for Refined Sound
The MSP7 STUDIO features a refined appearance that is a perfect match for its outstanding monitor performance. It is in fact functional beauty that results from an uncompromising approach to reproduction quality. The elegant rounded baffle has been primarily designed for superior dispersion characteristics, and is visually balanced by a high-efficiency rounded heat sink on the rear panel. The integral waveguide horn also contributes to outstanding sound while adding to the speakers visual appeal. Some speakers are designed to look good. The MSP7 STUDIO has been designed throughout for superior sound, and looks great as a result.

Polar Pattern

MSP7 STUDIO (Rounded Baffle)

0dB -6dB

Speaker with Square Baffle

90 270

SW10 STUDIO Powered Subwoofer
The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum Whether youre simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.

180 5000Hz 6300Hz 10000Hz Steel Yoke
180 5000Hz 6300Hz 10000Hz
Consistent Magnetic field direction
Internal vs. External Tweeter Mounting
MSP7 STUDIO Internally Mounted Tweeter Horn Integrated with Enclosure Externally Mounted Tweeter Separate Horn and Enclosure
Conventional Tweeter Magnetic Circuit

Main Magnet

Cabinet
Random Magnetic field direction
Shielding Magnet magnetized in reverse direction

Tweeter Tweeter

performance in any room and system.

MSP STUDIO Series

Powered Near-field Monitors

MSP7 STUDIO

MSP7 STUDIO Rear Panel

MSP5 STUDIO

MSP5 STUDIO Rear Panel

SW10 STUDIO

SW10 STUDIO Rear Panel
Refined Monitoring Precision Powered Monitor Speaker MSP7 STUDIO
2-way bass-reflex bi-amplified near field studio monitor
6.5" cone woofer and 1" titanium dome high-frequency unit delivers 45Hz- 40kHz frequency response. 130 watts (LF 80W + HF 50W) dynamic bi-amplified power. XLR balanced input. Advanced Magnetic Structure Design One-piece Molded Enclosure with Rounded Baffle 31 positions Level Control facilitates precise overall system level matching. Low Cut switch and TRIM Control (High/Low). Full magnetic shielding.
Powered Monitor Speaker MSP5 STUDIO
5" cone woofer and 1" titanium dome high-frequency unit delivers 50Hz- 40kHz frequency response. 67 watts (LF 40W + HF 27W) dynamic bi-amplified power. XLR balanced input and 1/4" unbalanced input. Advanced Magnetic Structure Design One-piece Molded Enclosure with Rounded Baffle 31 positions Level Control facilitates precise overall system level matching. TRIM Control(High/Low). Full magnetic shielding.

OPTIONS (MSP7 STUDIO)

2-way bas-reflex bi-amplified near field studio monitor
Powered Subwoofer SW10 STUDIO 10" bass-reflex powered subwoofer delivers solid 25Hz- 150Hz frequency response.
180 watts dynamic power. XLR balanced inputs (L/R/SUBWOOFER). XLR balanced outputs(L/R/SUBWOOFER) parallel

BWS50-190/260

Wall Bracket

OPTIONS (MSP5 STUDIO)

connection with input signals. Level control facilitates precise system level controls. 40-120 Hz, 80 Hz at Center Click LPF controls. Phase switch simplifies phase allignment. Full magnetic shielding.

BCS20-150/210

Ceiling Bracket

SPECIFICATIONS

MODEL GENERAL Type Crossover Frequency Overall Frequency Response Maximum Output Level Dimensions (W x H x D) Weight Magnetic Shielding Speaker Section Components Enclosure Amplifier Section Output Power * LF HF Type Material LF HF S/N, IHF-A filter Input Sensitivity XLR 3-31 PHONE Input Connectors, Impedance Output Connectors Controls Level Control LOW CUT Switch HIGH TRIM LOW TRIM POWER Switch PHASE Switch LPF control Indicators LED MSP7 STUDIO Bi-amp 2-way Powered Speaker 2.5 kHz LF:30dB/oct, HF:30dB/oct 45Hz-40kHz (-10dB) 106dB, 1m on Axis 218 x 330 x 235mm (8.6" x 13.0" x 9.3") 12.2kg (26.9lbs) Yes 6.5" cone 1.0" Titanium dome Bass-Reflex PP 80W THD = 0.05%, RL = 4 50W THD = 0.05%, RL = 6 99dB, LEVEL = Max +4dBu, LEVEL = Center -6dBu, LEVEL = Max XLR-3-31 (balanced), 10k 31 Positions Detent type VR (Min = -Attenuation) FLAT/80Hz (12dB/oct)/100Hz (12dB/oct) +1.5/0/-1.5dB at 15kHz +1.5/0/-1.5/-3dB at 45Hz on/off Green: Power On Red: Clipping 100W MSP5 STUDIO Bi-amp 2-way Powered speaker 2.5 kHz LF:24dB/oct, HF:24dB/oct 50Hz-40kHz (-10dB) 101dB, 1m on Axis 179 x 279 x 208mm (7.0" x 11.0" x 8.2") 7.9kg (17.4lbs) Yes 5" cone 1.0"Titanium dome Bass-Reflex PP 40W THD = 0.02%, RL = W THD = 0.02%, RL = 6 94dB, LEVEL = Max +4dBu, LEVEL = Center -6dBu, LEVEL = Max 10dBu, LEVEL = Cente -20dBu, LEVEL = Max XLR-3-31 (balanced), 10k PHONE (unbalanced), 10k 31 Positions Detent type VR (Min = -Attenuation) +1.5/0/-1.5dB at 15kHz +1.5/0/-1.5/-3dB at 60Hz on/off Green: Power On Red: Clipping 60W SW10 STUDIO Powered subwoofer 25Hz-150Hz (-10dB) 111dB, 1m on Axis 328 x 459 x 476mm (12.9" x 18.1" x 18.7") 26.5kg (58.4lbs) Yes (None covered type) 10" cone Bass-Reflex MDF 180W f = 100Hz, THD = 1%, RL = 8 100dB, LEVEL = Max +4dBu, LEVEL = Center -6dBu, LEVEL = Max XLR-3-31 x 3 (balanced), 10k XLR-3-32 x 3 (balanced), Parallel connection with Input Center Click VR (Min = -Attenuation) on/off Normal/ Reverse 40-120Hz, 80Hz at Center Click Green: Power On Red: Clipping 160W

Power Consumption

* These specifications apply to rated power supplies of 100, 120, 230 and 240 V. * Specifications and appearance subject to change without notice.