Instructions

Congratulations on your purchase of the Mamiya 645 PRO TL Mamiya pioneered the 6 x 4.5 film format and introduced the worlds first 645 SLR in 1975. The 645 PRO TL is the latest masterpiece in this series and Incorporates all the latest mechanical, electronic and optical advances. Its external appearance, too, has been modernized and its ergonomic design further enhanced. We are sure that you will enjoy the many advantages this camera and its accessories offer and want to particularly mention : The 645 PRO TL has a built-in self-timer (delayed shutter release) which will also facilitate time exposures. Attaching special leaf shutter lenses will automatically set the focal plane shutter to 1/8 sec. Heavy duty gears connect to the improved Power Drive Grip WG401, This grip also automatically cocks the leaf shutter lenses and permits remote control. The AE Prism Finder FE401, specially created for this camera, automates exposure and shows LED safety signals. 35mm film holders now come with panoramic adapters. A super fast 300mm f/2.8 APO lens was also designed for this camera. We are convinced that your camera will serve you well, because we have designed it for heavy professional use. However, we ask you to please read all operating instructions carefully before you put your equipment to work, in order to ensure proper operation and maximum results This manual covers the basic camera. Separate instructions are supplied with all system accessories, including lenses, finders, film holders, etc. For additional information please feel free to contact your authorized Mamiya dealer or the Mamiya importer in your country.

Contents

Special Features of the Mamiya 645 PRO TL. 3 Names and Functions of Parts.. 7 Attaching and Removing Lenses. 10 Attaching and Removing the Roll Film Holders. 11 Attaching and Removing the Viewfinder. 12 Removing and Attaching the Film Advance Crank... 13 Inserting the Battery.. 14 Battery Check... 15 Shutter Release Selector.. 16 Shutter Performance Test. 17 Before Film Loading.. 16 Film Loading... 19 Advancing the Film to the First Frame.. 21 Shutter Speed Settings.. 22 Aperture Ring/Stop-down Operation. 23 Focusing... 24
Depth of Field... 25 Film Advance and Unloading Exposed Film. 26 Using the Self-timer/Delayed Shutter Release. 27 Time Exposures.. 26 Multiple Exposures.. 26 Mirror Lock-up Photography. 29 Infrared Photography.. 30 Using a Tripod.. 30 Flash Photography.. 31 Holding the Camera Steady and Securely. 35 Attaching and Removing the Neck Strap. 36 Basic Accessories.. 37 System Chart.. 39 Trouble Shooting.. 40 Mamiya 645 PRO TL Specifications.. 41 Things to Watch.. 43 Common Sense Camera Care and Practice. 44
Special Features of the Mamiya 645 PRO TL
Image Area about 3X larger than 35mm Format
Interchangeable Rollfilm Holder System
- Bigger is better -The 6X4.5cm image size is about 3x larger than 35mm and therefore produces far superior results. It is large enough to be viewed without magnifier and its aspect ratio of about 1.25 (long side : short side) matche s the standard 8 x 10 inch ideal format, the most popular in photography and industrial use. It requires minimum cropping and gives maximum film utilization. (15 or 30 exposures on 120 or 220 film respectively)

-120, 220, 35mm, 35mm Panoramic and Polaroid -Permits quick film change, even in mid-roll. Many fail safe features prevent accidental exposures or film waste.
Rugged, Versatile and Reliable Camera Body
- Built for professional use -Mamiya pioneered the 645 SLR camera system in 1975 to create medium format image quality with 35mm handling ease. New models have periodically followed over the years to keep in step with mechanical, optical and electronic advances

Interchangeable

Viewfinders
1. AE Prism Finder FE401 The AE (automatic exposure) Prism Finder FE401 features three modes of TTL metering, including automatic switching from center-weighted averaging to spot metering. It also has a +3EV exposure compensation adjustment. 2. AE Finder FK402 Light weight, Keplerian (non prism) AE aperture priority finder offers an unreversed, upright image Features telescoping eyepiece with diopter adjustment from +5 to -5. 3. Prism Finder PF401 The Prism Finder PF401 is without metering electronics and designed for manual photography mode. Both Prism Finders show an unreversed, upright image and are ideal for eyelevel photography. 4. Waist Level Finder N The Waist level Finder N is desirable for low angle photograhpy and particularly for horizontal composition.
A self erecting hood with built-in magnifier shields groundglass from all ambient light. A built-in sportsfinder permits eyelevel viewing and is ideal for action photography.
Interchangeable Focusing Screens
The camera comes with a Type E, bright, split image, micro prism screen, useful for most applications. Five other types, for all specialized requirements, are also available.
Large Selection of World-Class Mamiya Lenses
Mamiyas in-house optical engineering and manufacturing department produces lenses specially designed for the medium format, of unsurpassable resolution, contrast and color fidelity. From 24mm Fisheye to 500mm telephoto, plus macro, zoom and APO lenses, these lenses have become the choice of the pros.
Motorized Power Drive Grips
Two accessory motorized drives, interchangeable with the manual film advance crank, are incorporated into an ergonomically designed grips for easy, right handed camera operation. Model WG 401 requires 6 AA batteries and features multiple exposure switch, cable release socket, battery check and continuous shooting. It also can be used with leaf shutter lenses. Model WG402, a simplified version, permits only individual exposures, uses one 6 Volt lithium battery and is much lighter.
<Self-timer> Self-timer for delayed shutter release. When activated it will light a red pilot lamp in the front of the camera for eight seconds and will blink for two seconds before triggering the shutter. <Time Exposure> Time exposures are made by utilizing the Self-timer and the "B" shutter setting. A new power saving circuit design switches the battery off and extends is life.

\ tro Pin Coupling Connector for 6- uit. dedicated TTL flash automation. (Such as Metz SCA396)
Finder Coupling Panel (Front) tl Finder Coupling Panel (Rear)
This contact receives film sensitivity data from the film holder.
S h u t t e r S p e e d Dial L o c k Release Button This button is used for unlocking the Shutter Speed Dial from an AE position

Film Holder Mount

Shutter Curtain
Exposures are controlled by opening and closing the curtain: a Never touch the surface of this curtain.
Film Transport GearFilm Holder Mounting Bracket Multiple Exposure Lever When this lever is set at "MULTI", film is not advanced even when the Film Advance Crank is turned, thus allowing multiple exposures on the same film frame.
Distance Scale The camera to subject distance can be set or confirmed with this scale Lens Alignment Dot Depth-of-field Scale Provides a quick reading of depthof-field for various apertures and distances. Exposure Meter Coupler This coupler is engaged with the Aperture Ring Coupling Pin, transmitting diaphragm information to the AE Prism Finder.
Tripod Socket 1/4 tripod socket. To convert to a 3/8 socket, remove the small screw in the base of the socket. Then remove the bushing. See page 32.
@ Attaching and Removing Lenses 0
Removing the Front Body Cap and Rear Cover Attaching the Lens Removing the Lens.
First remove the Front Body Cap in the direction of the arrow, while pushing the Lens Release Button 8 backwards as indicated by arrow. Rear Body Protective Cover can be readily removed by depressing the part of @ as shown in the illustration.
Line up red Lens Alignment Dot 0 against red camera Alignment Dot $3 and gently insert the lens into the camera body. Then turn the lens clock wise, as indicated by arrow, until it clicks into place. Make sure that the Aperture Ring Coupler Pin is engaged with the Exposure Meter Coupling Pin @I,, which sticks out under the Mamiya name plate of the camera.
While pushing lens release button @ backwards, turn lens counterclockwise. (Same procedure as removing body cap).

For normal operation set the White Dot of the Shutter Release Selector (8 against the White Square Dot 0.
When set to the Red Dot 0, the Release Button is locked. * Select this mode if the camera will be idle for a period and to prevent accidental shutter release. Also when the Power Drive Grip is used.

Shutter Performance Test

1. Attach the Roll Film Holder to the camera body. 2. Pull out the Dark Slide and place it into its Storage Slot.
3. Set the Shutter Speed Dial to any other position than Aor AEL. When the AE Prism Finder is not mounted on the camera, the shutter will not release if the Shutter Speed Dial is in the A or AEL position, the film holder is supplied with a vinyl tube. When placed in the take-up compartment it engages the film sensor and makes the holder function as if it is loaded with film. Please remove the tube
4. Set the Multiple Exposure Lever on the body to the MULTI position.

Before Film Loading

Film Speed (ISO) Dial

Memo Clip

5. Set the Shutter Release Selector to " 0 " (normal mode), and press the Shutter Release Button. 6. After the shutter has been released, advance the Film Advance Crank one complete revolution and the next frame will be ready.
Each film holder has this important feature. It electronically interfaces the film holder with the AE Prism Finder, the focal plane shutter and the lens diaphragm, for exposure automation. This eliminates the need of having to manually reset the meter, every time you change film holders loaded with different films. Therefore make it a routine to always set this dial with the speed of the loaded film. IS0 25
The Memo Clip on the back of the Roll Film Holder Cover accepts the box top of the film carton and can also be used for other reminders.

Speed Index

of film holder
0 (32)(40) (64)(80) (125)(1601 (X0)(320) (5001(6401(10001(1250) (2ooo)c25oo,(4oao)(sooo)

Film Loading

1. While pushing the Back Cover Lock Release Button 8 downward, press the Back Cover Opening Button @;:, and the Back Cover will open.
2. While squeezing in on both sides of the Release Latch CQ, pull the Roll Film Insert out of the camera body. At that time, move the empty spool in the upper part down to the lower spool compartment When you load film for the first time, remove and discard the protective paper cover which is attached to the film rails in the roll film holder.
3. Align the right-hand side of this empty spool with the lower Spool Stud 8 (convex). Slide the spool into position making sure that the leftside of the spool is properly held by the Spool Clip.

4. In the same manner, insert a roll of film in the upper compartment. At that time, check that the film leader paper is set as shown in the photo above. (The leader paper inside is facing outward on the pressure plate. Note that the film direction is wrong if the leader paper is facing inward.) 5. Pull out some of the leader paper. Insert the tip of the leader paper into the slot of the lower Take-up Spool.
6. Gently rotate the take-up spool as shown in the photo until the start mark on the leader paper is aligned with the start mark (a) on the spool clip. * Correctly align the start marks with each other, making sure that the film feeds properly. When improper feeding occurs, the proper number of exposures may not be taken. * Avoid exposing the film to direct sunlight when inserting or removing film. @I
* 220 Film Loading Caution 220 films have two types of Start Mark Lines across the paper leader. Always use the second one, a solid line with the legend Start Mark for standard cameras, located about 14cm (5 1/2), behind the first, dotted Mark line.
DO NOT use the dotted line for a start mark.
Advancing the Film to the First Frame
7. Insert the loaded Roll Film Insert into the holder, the film roll on top, while squeezing on both sides of the Release Latch Cc as shown in illustration. Make sure that is been properly seated and is locked in place. Then close cover by firmly pressing its top against the Roll Film Holder. * To close the Back Cover, firmly press the top of the back cover on both sides.
1. While spanning the Roll Film Holder between your thumb and middle ,. finger holding it on the rubberized it finger rests, carefully align its Film Holder Mounting Bracket with the corresponding center clip of the camera body. 2. While keeping this alignment, press the upper part of the Roll Film Holder against the camera body, so that it clicks into place by engaging the spring loaded twin camera catch.
Set the multiple exposure switching lever A to the white square mark 0 (normal mode).

Shutter Speed Settings

The yellow 2 and 4 are full seconds. B (shutter stays open as long as it is depressed) is also yellow. 4. Red 60 is 1/60 sec. It is colored red to remind you that it is the fastest speed useable with electronic flash. 5. Note: When a Metz Electronic Flash Unit, together with SCA 396 module, is attached to the camera, the camera sets itself automatically to 1/60 sec., irrespective of the dial setting. * When manually selected shutter speeds are set on the shutter speed dial, the intermediate shutter speeds available in the AE operation are not obtainable.

3. Wind up. Wind up the crank handle until it stops. In the film counter window, the number 1 appears, and the film and shutter are set.
How to set the Shutter Speed Dial 1. Set the desired shutter speed against the white index line (A) on the shutter speed dial. 2. At the red A" (for Automatic) and AEL (for Automatic Lock) settings, the shutter speed dial is locked between these two positions. These settings will only function if an AE Finder is mounted on the camera. To release this lock push button (B) while turning dial. 3. All while numbers are fractional seconds. (i.e. 30 =1/30 sec). @
Aperture Ring/Stop-down Operation
* When the AE Finder is used, be sure to return the A/M lever to A (Auto), after having checked the effect of the manually set aperture. The AE finder measures the required exposure through the lens at maximum aperture and will give false results if lever is left in M position.
Set the desired f/stop on the aperture Ring 6) by aligning the f/number with the red reference dot SC@ in the center of the Scale Ring. The Aperture Ring has a click stop for each f/ stop. In-between settings can also be used.
The effect the set f/stop will have upon the picture area can be confirmed on the Finder Screen. Move the AM Lever on the lens so that M becomes visible-the lens then can be stopped down to the preselected aperture.

0 Focusing 4B

While looking through the viewfinder, turn the lens Focusing Ring until the most important subject part appears sharp and clear. Focusing with the Standard Focusing Screen N Type E r-
1. The camera comes equipped with a bright, Type E, Rangefinder/Microprism Focusing Screen. It features a center, split-image rangefinder spot and the subject is in sharp focus when the split images combine into one. 2. The microprism ring around the split-image center further facilitates focusing. The microprisms disappear only when the subject is in sharp focus.
3. The rest of the ground glass area can also be used for focusing. *Interchangeable F o c u s i n g Screens There are five additional focusing screens available for specialized applications. They are easy to interchange and come with instructions.

Depth of Field

Reading the Depth of Field Scale Depth of field is defined as the zone of sharpness before and behind the plane of focus. It depends on camera subject/distance, focal length of lens, aperture setting and distance the lens is focused at.
1 I For example, with the 80mm f/2.8N lens focused at 3m and the aperture set at f/22, the depth of field scale indicates that the zone of sharp focus will extend from about 2m to 6m. In addition to visual observation, the Depth of Field can be determined by using the Depth of Field Scale on each lens. f/stop numbers appear on both the right and left side of the red index mark in the center of the scale ring. Simply read the figures which appear above the f/stop numbers on the distance scale of the lens.
Film Advance and Unloading Exposed Film
Film Advance Unloading Exposed Film * Move the empty spool from the top to the lower (take-up) compartment, ready for loading the next film roll. *Never load, unload or handle film in direct sunlight.
1. Giving the Film Advance Crank one complete turn, will cock the shutter and mirror and ready the camera for the next exposure. 2. When the film is completely exposed (15 exposures on 120, 30 on 220 film), the crank stop will disengage. Continue turning until the paper trailer is completely wound onto the take-up spool. (About five turns after the last exposure.)
3. Open the Back Cover, and remove the Roll Film Insert. The Exposure Counter will return to S (start) automatically. 4. Pull the Spool Clip on the roll film insert out to remove the film. 5. Remove the film from the roll film insert; make sure that the film on the roll does not loosen, and seal immediately.
Using the Self-Timer/Delayed Shutter Release
* After using the self-timer mode, be sure to return the Shutter Release Selector to the White Square. (Normal mode.) -k To override the self-timer, after having pressed the release, move the selector back to the white square. * The Self-Timer can also be overridden by inserting the Dark Slide into the Film Holder or setting the camera Shutter Speed Dial to B. Please note: If you want to use the self-timer with the shutter speed dial set at A or AEL and there is no AE Finder attached to the camera, it will not release the shutter even though the light goes on for 10 seconds. However, when the dial is set to manual speeds, the selftimer will function.

To use the Self-Timer, set the Shutter Release Selector to @ and press the Shutter Release Button.
The Battery Check Lamp will light for 8 seconds and blink for 2 seconds, whereupon the shutter will go off.

Time Exposures

Multiple Exposures
For time exposures set the Shutter Release Selector to c, the self-timer mode, and set the Shutter Speed Dial to "B". Press the shutter release and both mirror and shutter will stay open until the shutter release is pressed again. You may also use a cable release together with the cable release adapter. (The battery circuit will automatically switch off to save power.)
* "B" can be terminated by shifting the Shutter Release Selector from 23 or the Shutter Speed Dial from "B"
Aligning the white dot of the Multiple Exposure Lever with the yellow MULTI square, disengages the multiple exposure prevention mechanism, and the film will not advance after an exposure is made and the Film Advance Crank is turned. However, the shutter will be recocked, thus making multiple exposures possible. In this mode the Exposure Counter will not advance.
Mirror Lock-up Photography
* To override the multiple exposure mode or to return to normal operation, be sure to return the levers White Dot against the white square and then advance the film. (If you forget you will continue to make multiple exposures on the same frame.) *When using the AE Prism Finder, set the Shutter Speed Dial to AEL. Press the shutter release halfway and then lock the mirror up. If set to A and the mirror is locked up, LT (long time) will appear in the finder display and correct exposure cannot be obtained. * When using a Leaf Shutter Lens, be sure to read the instructions accompanying it.
This is an important feature when the tripod mounted camera is used at slow or long exposure times and particularly also with use of long telephoto lenses. It eliminates the possibility of even the slightest mirror bounce which may affect image sharpness. Move the Mirror look-up Lever to the yellow M.UP square, after you have composed and focused your picture. This will raise the mirror and the viewfinder image will be blacked out. After use, return lever to normal (white square) position. @

Infrared Photography

Infrared light rays-being of longer wavelength - focus at a slightly different plane and require the following adjustment: 1. Note the Red Index Mark against which you read your distance scale. The red infrared index mark is slightly to its right. 2. After focusing in the usual manner, read the distance scale and move it to the right to line up with the infrared index mark.

@ Using aTripod @

The 300mm and 500mm APO lenses for Mamiya 645 cameras, being also corrected for infrared light rays, do not need an index mark for infrared. * For proper filter and exposure information be sure to consult the instructions enclosed with infrared film. The Mamiya 645 PRO TL Tripod Socket accepts a standard 1/4 tripod mounting screw. For use with tripods having 3/8 mounting screws, first unscrew the small black philips head retaining screw in the center of the tripod socket. Then remove the 1/4" bushing with a thin coin. To re-install the 1/4 bushing, reverse the process.

Flash Photography

In addition to its standard flash sync system, the Mamiya 645 PRO TL features TTL (through the lens), off the film (OTF), electronic flash exposure automation. A flash sensor located inside the camera body reads the flash reflected from the film surface at the moment of exposure. The.sensw is connected via coilcords to a dedicated electronic Metz SCA 396 thyristor module, which is attached to the flash shoe of the camera. The module has an IS0 dial on which the speed of the film in use is set. The resulting flash exposure automation determines correct flash exposure and automatically adjusts the output of the flash. It also automatically corrects for exposure compensation ordinarily required when using filters, closeup bellows or extension tubes. However, as all TTL systems, it requires manual compensation for differences in film surface reflection characteristics. Compensation is made by adjusting the film speed selector setting an SCA 396 module. The amount of compensation is determined by experimentation. Important: Read Operating Instructions which are supplied with flash unit before use. Always turn off cameras power switch when attaching or removing flash units.

Attaching Metz Flash Units
Metz flash 60CT-4/45CL-4 Various optional accessories are needed to attach different Metz Flash Units to the Mamiya 645 TL
Metz shoe mount flash type Metz flash 50MZ-5 This table shows accessories required with various Metz Flash Uunits

Metz Flash Units

SCA396 adapter IF? Yes Yes Yes Yes Yes Yes Yes
SCA300 adapter 3 No No No No No

Bracket AD401 E No No

--.-.-__~-_---.- -_----.__---. _--- _-.-.~---~_-~- -. _.- Shoe mount flash
Double shoe adapter AD402 0
60CT-4 50MZ-5 45CL-4 40MZ-3 40MZ-2 32MZ-3 32Z-2
No No _---_---~.-No No No No No No
TTL Flash Photography with Metz Flash Units aperture selected is not within the exposure/distance range of the flash. In this case, select a wider aperture setting. When using flash at maximum distance, which requires the full power of theflash unit, recyling time will be longer. Wait for the readylight to go on before firing the next frame. Exposure Compensation with TTL Flash Automation. Because TTL Flash automation reads the light reflecting off the subject, exposure may require manual adjusment in cases where subject and background are predominantly white or black (e.g. bride in white dress against white background; bridegroom in tuxedo against dark background.) In these instances, the resulting TrL exposure will either be under-exposed or over-exposed. For such situations, adjustment of about 1 to 1 l/2 f/stops, plus or minus, may be requiredthroughexperimentation. Alternatively, a hand held incident flash meter reading will show proper exposure in these cases.
1. Attach a Metz flash unit which features TTL function to the camera. Attach the SCA396 module to the cameras flash shoe. Connect the modules coiled cables to the camera and the flash unit. Set the film speed dial on the SCA396 module to the IS0 rating for the film in use. The range of IS0 is 25 to 1250. 2. Move the flash units power switch to ON and the mode selector to TTL. 3. Turn the cameras shutter release selector switch to ON. When the charge cycle is completed you will see an illuminated green 5 readylight in the middle of the right side of the

Mamiya 645 PRO TL Specifications
Camera type Actual negative site Film type
6X4.5cm electronically focal-plane shutter SLR 56mm X41.5mm 120 roll 220 roll Polaroid 135 roll film (15 exposures) film (30 exposures) pack film (Polaroid 100, 600 series) film in film cartridge
Film loading Standard lenses Lens mount Shutter Shutter speed Shutter release Mirror Viewfinder Focusing screen Field of view

Daylight loading

interchangeable film holders with film speed dial
Mamiya-Sekor C 80mm f/2.8N Mamiya-Sekor C 80mm f/1.9N M645 bayonet mount (applicable to all M645 lenses) Moving coil, electronic controlled focal-plane shutter (Manual) 4 sec. -1/1000 sec., B (T) (Auto) 8 sec. - 1/1000 sec. (When the AE Finder is used.) Electromagnetic release. Selectable release lock or self-timer mode. Instant return, front coated mirror, with mirror lock-up capability. Interchangeable (Waist Level Finder N, Prism Finder FP401, AE Prism Finder FE401 and AE Finder FK402) Standard: Rangefinder Spot/Microprism with Fresnel Lens,accessory screens available. (Same as the M645 Super) 94%

Things to Watch

* When using the AE Prism Finder FE401 When using this finder it is imperative that the Film Speed Dial on the Roll Film Holder is properly set for the IS0 number of the loaded film, as it interfaces with this finder. If not done, wrong exposures may result. * When the mirror is locked in the up position. The Focal Plane Shutter Curtain may be damaged if the camera faces strong light sources, especially the sun. Return mirror to normal position or use lens cap to prevent such damage.
Common Sense Camera Care and Practice
Your Mamiya 645 PRO TL is a precision mechanicaloptical-electronic instrument, built for heavy and reliable professional use. It will reward you with a long service life if properly treated and maintained. Please observe these common sense rules: * Read instructions before using camera. * Protect camera against shocks and falls. Use neckstrap supplied with it, whenever possible. * Protect camera against rain and moisture. If it gets wet, wipe it with a soft, clean cloth. * Do not touch lens or mirror surfaces. To remove dust use air blower or lens tissue. To remove fingerprints use lens tissue and lens cleaning fluid if necessary. * Do not touch gold plated contacts on camera body, lenses, rollfilm holders and AE Finders. If necessary. wipe them with a clean, dry cloth. * Operate the film advance lever with even, measured strokes, to assure proper spacing. * Always test your equipment before going on important assignments. + Do not store camera at temperatures exceeding 40% (lOYF)and-lOC(15F)andprotect it against humid or sea air environment. * Periodically exercise your camera and lenses by making blind exposures at various shutter speeds. Also move the diaphragm ring and focusing mounts of all lenses repeatedly. Battery Advice : * The battery supplied with the camera by the factory may have been subject to storage conditions which have reduced its service life. Check it before use and always carry spare batteries. Be sure to wipe battery contacts before inserting it, in order to insure proper contact. Be sure to observe proper polarity. (Match +pole of battery with +mark in battery chamber.) Battery life varies, depending on make, frequency of use, age, storage condition and ambient temperature. (Place battery in External Battery Case accessory which you wear inside your clothing, when photographing in cold climates) * Always remove the battery when camera is not used for longer than a few weeks and store it in a cool, dry place. @

Storage

* When storing camera : Turn shutter release selector dial to the red dot. (Off position) Leave shutter and mirror in uncocked position. The same applies to leaf shutter lenses.
Special Advice To Professional Photographers Your Mamiya 645 PRO TL is designed for heavy professional use and will give you a long service life if properly maintained. Your camera and lenses have many moving parts which require periodic lubrication. Its electronic components, too, are subject to wear and tear and are affected by ambient conditions like dust, sand, sea air, heat and moisture. If cameras had odometers like automobiles. it would be easier to specify servicing schedules. May we suggest that if you shoot thousands of film rolls per year, you send your equipment annually for servicing by the Mamiya distributor in your country

Instructions

Congratulations on your purchase of the Mamiya 645 PRO
Mamiya pioneered the 6x4.5 film format and introduced the worlds first 645 SLR in 1975. The 645 PRO is the latest masterpiece in this series and incorporates all the latest mechanical, electronic and optical advances. Its external appearance, too, has been modernized and its ergonomic design further enhanced. We are sure that you will enjoy the many advantages this camera and its accessories offer and want to particularly mention: The 645 PRO has a built-in self-timer (delayed shutter release) which will also facilitate time exposures. Attaching special leaf shutter lenses will automatically set the focal plane shutter to 1/8 sec. Heavy duty gears connect to the improved Power Drive Grip WG401. This grip also automatically cocks the leaf shutter lenses and permits remote control. The AE Prism Finder FE401, specially created for this camera, automates exposure and shows LED safety signals. 35mm film holders now come with panoramic adapters. A super fast 300mm f/2.8 APO lens was also designed for this camera. We are convinced that your camera will serve you well, because we have designed it for heavy professional use. However, we ask you to please read all operating instructions carefully before you put your equipment to work, in order to ensure proper operation and maximum results.
This manual covers the basic camera. Separate instructions are supplied with all system accessories, including lenses,finders, film holders, etc. For additional information please feel free to contact your authorized Mamiya dealer or the Mamiya importer in your country.
Special Features of Mamiya 645PRO..3 Names and Function of Parts..7 Attaching and Removing Lenses.. 10 Attaching and Removing Roll Film Holders. 11 Attaching and Removing Viewfinders.12 Attaching and Removing the Film Advance Crank...13 Inserting Battery and Battery Check.. 14 Shutter Release Selector..16 A Trial Familiarization Test..17 Film Loading...18 Advancing Film to the First Exposure..21 Aperture Ring/Stop-down Operation.23 Focusing...24 Depth-of-field..25
Film Transport and Film Unloading..26 Using the Self-timer/Delayed Shutter Release.Multiple Exposures..27 Time Exposures..28 Mirror Lock-up Photography.29 Infrared Photography..30 Using Flash..31 Using a Tripod..32 Holding the Camera Steady and Securely.33 Attaching and Removing the Neck Strap.34 Specifications...35 Trouble Shooting..37 Basic Accessories..39 System Chart..41 Storing and Checking the Camera..42
Features and specifications subject to change without notice. 2
3 x More Negative Area Than the 35mm Format Plus Superior Image Quality From Mamiya WorldClass Lenses The 6x4.5cm format offers approx. 3 times more image area than the 35mm (24x36mm) format, Mans vision is horizontal and rectangular. Film Holders are rectangular and so are most pictures in them. The 6x4.5 format is also large enough to be viewed without a magnifier and its aspect ratio (horizontal / vertical) is ideal, requiring minimum cropping. Mamiyas high performance medium format lenses assure sharpness and beautiful color fidelity.
Two new convenient safety features have been added to the 645 PRO in the form of state-of-the-art optoelectronics which immediately identifies problems with the shutter (i.e. when it will not release) when the AE Prism Finder FE401 is used. Whether these malfunctions develop from failure to draw out the Dark Slide, or if there are problems in film take-up, the LED will indicate the source of the trouble. With these new advancements, Mamiya believes the most demanding pro will be more than satisfied with the new edition 645.
3- Enables Polaroid Photography -
Enhanced Interchangeable Roll Film Holder System and Even 35mm Panoramic
2 - Tailored to Satisfy Pro Needs -
Sturdy, Versatile, Safe and Highly Reliable Body
Introduced in 1975 to not only provide an alternative to the 35mm format, but to afford the user with advanced versatility given its much larger format, the Mamiya 645 Series is constantly being upgraded. Elements such as speed and handling plus a host of other special features have been enhanced to satisfy the needs of most demanding professionals.
The 645 PRO features an interchangeable film holder system capable of using a far wider range of roll film holders than before. Depending on the application, the system can be quickly attached to or detached from the camera, ensuring the ability to catch even fast changing scenes. It also features fail-safe devices including, for example, one that warns when you have failed to take out the dark slide when the AE Prism Finder FE401 is being used.
Interchangeable Viewfinders 1. AE Prism Finder FE401 The AE (automatic exposure) Prism Finder FE401 features three modes of TTL metering, including automatic switching from center-weighted averaging to spot metering. It also has a +/-3EV exposure compensation adjustment. 2. Prism Finder PF401 The Prism Finder PF401 is without metering electronics and designed for manual photography mode. Both Prism Finders show an unreversed, upright image and are ideal for eyelevel photography. 3. Waist Level Finder N The Waist level Finder N is desirable for low angle photography and particularly for horizontal composition. A self erecting hood with built-in magnifier shields groundglass from all ambient light. A built-in sportsfinder permits eyelevel viewing and is ideal for action photography.

Bright, Dynamic Images Visible on the Focusing Screen - 5 Selectable Types Available The 645 PRO can reproduce bright, dynamic and sharp images on the focusing screen, enabling optimum composition to be obtained according to the photographic purpose. In addition, the 645 PRO greatly enhances focusing. 5 types of focusing screens are available to facilitate photographing a wide variety of subjects.
6 - Sharp Images and Outstanding Color Balance -
A Comprehensive Series of Interchangeable Lenses
There are an amazing variety of interchangeable lenses in the PRO 6 x 4.5 format series. Mamiya has concentrated an all-out effort on the systematic production of lenses in an effort to satisfy a multitude of needs. All lenses are multi-coated to eliminate flare and ghosting even under the most adverse light conditions. While the series now also features three leaf shutter lenses, all lenses exhibit the utmost in color balance, high resolu-
tion and crystal clear definition. A feature lens is the new 300mm f/2.8 APO lens which eliminates chromatic aberration and produces photos with the sharpest definition. Given the wide variety of lenses in the 645 PRO Series, they greatly expand the world of images that are possible.
built-in camera mechanism will automatically advance the film to the next frame, when the shutter release is activated, either on the camera body or on the Power Drive Grip WG401.
Auto winding with the Power Drive Grip WG401 This Power Drive Grip WG401 has been specially designed for heavy duty, motorized operation with the 645 PRO. It also permits automatic shutter cocking of the leaf shutter lenses and can be remote controlled. Another feature, not available previously is the following: When attaching a partially exposed film holder (in which the film has not been advanced to a new frame), to the 645 PRO equipped with the Power Drive Grip WG401, a
New Automatic Leaf Shutter Lenses for added versatility. 55mm (Wide Angle), 80mm (Standard) 150mm (Telephoto) lenses
These lenses are all in Seiko #0 shutter, offer the advantages of syncroflash photography at all shutter speeds 1/ 30, 1/60, 1/125,1/250 and 1/500sec. The optional Power Drive Grip WG401 will automatically cock the shutters as it transports the film and moves the mirror. The cameras focal plane shutter must be set at 1/8 sec. for leaf shutter mode operation. The leaf shutter lenses can do it automatically.

A Broad Accessory System For Specialized Applications A useful accessory system to serve the specialized needs of the photographer. It includes Auto Bellows and Auto Extension Rings for close-up and copying work; Infrared Remote Control for studio and nature photography; External Battery Case for operating in cold surroundings; Camera Grips for convenient holding and more.
<Self-timer> Self-timer for delayed shutter release. When activated it will light a red pilot a m a the front of the camera fori eight n l lamp in m p seconds and will blink for two seconds before triggering the shutter. <Time Exposure> Time exposures are made by utilizing the Self-timer and the B shutter setting. A new power saving circuit design switches the battery off and extends is life.

10 Other

Features
<Mirror Lock-up> After focusing, the Mirror can be locked up before making an exposure. This is convenient when the camera is used at slow shutter speeds and is mounted on a tripod for telephotography, copy work, etc., since even a very small amount of vibrations should be eliminated.
Focusing Screen N Aperture Ring Couping Pin This pin is fitted into the Exposure Meter Coupler of the lens, to transmit the aperture data to the AE Prism Finder. Battery Check Lamp Focusing Screen Release Pin When you want to change the screen. slide this pin to the left and remove the screen.
13 Gold Plated Contacts These contacts interface the AEPrism Finder with the ISO dial on the film holder and the shutter speeds. Hot-shoe (X contact) A cordless flash can be used with this shoe.
Lens Release Button Auxiliary Release Contact When the cover is moved to the left. the contact appears. This contact is used for connections of external releases such as a special hand grip and remote control unit. Battery Check Button LED displays the present battery condition.
collar is turned to the red dot.
Mirror / * Never touch the surface of the mirror.
Finder Coupling Panel (Front) Finder Coupling Panel (Rear) Electric Contact for Film Holder This contact receives film sensitivity data from the film holder. Film Holder Mount

Shutter Speed Dial Lock Release Button This button is used for unlocking the Shutter Speed Dial from an AE position. Shutter Speed Dial This dial selects the shutter speed, and switches the operation mode from AE to manual photography. Neck Strap Lug
Film Holder Coupling Pin Shutter Curtain Exposures are controlled by opening and closing the curtain Film Advance Crank A Single complete turn cocks the shutter and advances the film for each exposure. Multiple Exposure Lever When this lever is set at MULTI, film is not advanced even when the Film Advance Crank is turned. thus allowing multiple exposures on the same film frame.
Film Holder Mounting Bracket
Distance Scale The camera to subject distance can be set or confirmed with this scale. Lens Alignment Dot Depth-of-field Scale Provides a quick reading of depth-of-field for various apertures and distances. Exposure Meter Coupler This coupler is engaged with the Aperture Ring Coupling Pin, transmitting diaphragm information to the AE Prism Finder.
Tripod Socket 1/4" tripod socket. To convert to a 3/8" socket, remove the small screw in the base of the socket. Then remove the bushing. See page 32.
Battery Chamber Cover Battery Chamber Cover Latch
Removing the Front Body Cap and Rear Cover

Attaching the Lens

Removing the Lens.
First remove the Front Body Cap in the direction of the arrow, while pushing the Lens Release Button 8 backwards as indicated by arrow. Rear Body Protective Cover can be readily removed by depressing the part of @ as shown in the illustration.
Line up red Lens Alignment Dot @ While pushing lens release button backagainst red camera Alignment Dot wards, turn lens counterclockwise. (C) and gently insert the lens into the (Same procedure as removing body camera body. Then turn the lens cap). clock wise, as indicated by arrow, until it clicks into place. Make sure that the Aperture Ring Coupler Pin is engaged with the Exposure Meter Coupling Pin @, which sticks out under the Mamiya name plate of the camera. * When the Aperture Ring Coupler Pin is engaged

by the exposure meter coupling pin lever, F/stop data is conveyed to the AE Prism Finder. 10
Attaching the Roll Film Holder
Removing the Roll Film Holder * If the Dark Slide is not inserted, the safety lock will prevent the holder from being removed.
* The Dark Slide can be inserted in the Roll Film Holder up to the Green Line, marked on the slide, without affecting the image.
Green Line * Remove the Roll Film Holder Cover. 1. While spanning the Roll Film Holder between your thumb and middle finger, holding it on the rubberized finger rests, carefully align its Film Holder Mounting Bracket with the corresponding center clip of the camera body. 2. While keeping this alignment, press the upper part of the Roll Film Holder against the camera body, so that it clicks into place by engaging the spring loaded twin camera catch.
1. Insert the Dark slide into the slot
marked by White Lines on the side of the holder. 2. Push the lower one of the Film Holder Detaching Lock Release Button (A) downward, while simultaneously pushing the Film Holder Detaching Button @I inward.
Attaching the Finder. The same procedure applies to all finders. The illustrations shows the AE Prism Finder FF401.

Removing the Finder

Lift the Upper Cover from the camera body. Insert the Attaching Latches (A) of the finder into the Finder Coupling Panel (B) in the front wall of the body. Press the finder down until the rear latch locks securely in place.
Spanning the finder with your fingers, push the button on its right side marked with a downward pointing arrowQ,downward, while pushing the other button, on the left side@, inward.

Removing the Crank

Attaching the Crank
Push the lock Lever (A) on its bottom in a forward direction as far as it will go (see illustration).
With the flat part, having a White Index Line, on top, line the Crank up against its mounting plate on the side of the body and push Film Advance Crank Lock Lever backward.
You may choose six different crank starting positions to suit your preference. The orientation of the crank proper against its base, before it is attached to the camera, will be maintained when the entire assembly is locked into place.

Inserting the Battery

1. Attach the Roll Film

Holder to the camera body. 2. Pull out the Dark Slide and place it into its Storage Slot.
3. Set the Shutter Speed Dial to any other position than A or AEL. When the AE Prism Finder is not mounted on the camera, the shutter will not release if the Shutter Speed Dial is in the A or AEL position.
4. Set the Multiple Exposure Lever on the body to the MULTI position.
5. Set the Shutter Release
Selector to 0 (normal mode), and press the Shutter Release Button. 6. After the shutter has been released, advance the Film Advance Crank one complete revolution and the next frame will be ready.
____~~~ * When only the body is tested, the familiarization checkout can be made either in the MULTI or 0 (normal mode).
The empty film spool included with the film holder is supplied with a vinyl tube. When placed in the take-up compartment it engages the film sensor and makes the holder function as if it is loaded with film. Please remove the tube after your test.
1. While pushing the Back Cover Lock Release Button (A) downward, press the Back Cover Opening Button, and the Back Cover will open.
2. While squeezing in on both sides of the Release Latch (A) pull the Roll Film Insert out of the camera body. At that time, move the empty spool in the upper part down to the lower spood compartment.
3. Align the right-hand side of this empty spool with the lower Spool Stud (A) (convex). Slide the spool into position making sure that the left-side of the spool is properly held by the Spool Clip.
When you load film for the first time, remove and discard the protective paper cover which is attached to the in the roll film holder. 18
4. In the same manner, insert a roll of film in the upper compartment. At that time, check that the film leader paper is set as shown in the photo above. (The leader paper inside is facing outward on the pressure plate. Note that the film direction is wrong if the leader paper is facing inward.)
5. Pull out some of the leader paper. Insert the tip of the leader paper into the slot of the lower Take-up Spool.

Gently rotate the take-up spool as shown in the photo until the start mark on the leader paper is aligned with the start mark (A) on the spool clip. * Correctly align the start marks with each other, making sure that the film feeds properly. When improper feeding occurs, the proper number of exposures may not be taken. * Avoid exposing the film to direct sunlight when inserting or removing film.
Inserting the Roll Film Insert

Film Speed (ISO) Dial

Insert the loaded Roll Film Insert into the holder, the film roll on top, while squeezing on both sides of the Release Latch (A) as shown in illustration. Make sure that is been properly seated and is locked in place. Then close cover by firmly pressing its top against the Roll Film Holder. * To close the Back Cover, firmly press the top of the back cover on both sides.
Each film holder has this important feature. It electronically interfaces the film holder with the AE Prism Finder, the focal plane shutter and the lens diaphragm, for exposure automation. This eliminates the need of having to manually reset the meter, every time you change film holders loaded with different films. Therefore make it a routine to always set this dial with the speed of the loaded film.
The Memo Clip on the back of the Roll Film Holder Cover accepts the box top of the film carton and can also be used for other reminders.

Color Codes

Attach the loaded Roll Film Holder to the camera. Remove Dark Slide and store it. Turn the Multiple Exposure Lever (A) to its normal position, White Dot against White Square. Turn the Film Advance Crank until it stops. The number 1 will now appear in the Film Counter Window. The Focal Plane Shutter and Mirror are now cocked and the camera is ready for the first exposure.
Set the desired shutter speed against the white index line (A) on the Shutter Speed Dial. 1. At the "A" and "AEL" settings, the ShutterSpeed Dial is locked between these two positions. 2. To release this lock, turn the Shutter Speed Dial while pushing the Lock Release Button (B). 3. At all other settings the dial can be rotated freely and each speed number will click into place.
1. full seconds. All other numbers 1 are fractional seconds. (i.e. 30 = 1// 30 sec.) 2. The yellow B indicates Bulb. At thissettingtheshutterremainsopen as long as the release is pressed. 3. The red 60 (1160 sec.) reminds you that it is the fastest permissible shutter speed setting when using electronic flash.

4. A and AEL explained

A (auto exposure) and AEL (auto exposure lock) setting must only be used when the AE Prism Finder is attached to camera. 1. If it is not attached and the dial is set to either of these positions, the shutter release will not work. 2. If it is not attached and the SelfTimer is activated, the Pilot Lamp will Iight for 10 seconds but the shutter will again not release. If the Shutter Speed Dial is set between click stops either the higher or lower exposure speed may result.
Set the desired f/stop on the Aperture Ring (A) by aligning the f/number with the red reference dot (B) in the center of the Scale Ring. The Aperture Ring has a click stop for each f/ stop. In-between clicks can also be used.
The effect the set f/stop will have upon the picture area can be confirmed on the Finder Screen. Move the AM Lever on the lens so that M becomes visible - the lens then can be stopped down to the preselected aperture.
*At position A, the lens is always stopped down only when the shutter is being released with the aperture being open. * During normal photography, set the AM Lever so that A is visible. At M, focusing will be a little difficult. * When using the AE Prism Finder, be sure to set the AM Lever on A; otherwise, correct exposure cannot be obtained. *When aperture has been confirmed, be sure to reset the AM Lever to A. See Depth-of-field on page 25.
Focusing with the Standard Focusing Screen N Type E
While looking through the viewfinder, turn the lens Focusing Ring until the most important subject part appears sharp and clear.
1. The camera comes equipped with a bright, Type E, RangefinderlMicro-prism Focusing Screen. It features a center, split-image rangefinder spot and the subject is in sharp focus when the split images combine into one. 2. The microprism ring around the split-image center further facilitates focusing. The microprisms disappear only when the subject is in sharp focus.
3. The rest of the ground glass area can also be used for focusing. * Interchangeable Focusing Screens There are four additional focusing screens available for specialized applications. They are easy to interchange and come with instructions.

ing the Shutter Release Selector from $) or the Shutter Speed Dial from B.
For time exposures set the Shutter Release Selector to 0, the selftimer mode, and set the Shutter Speed Dial to B. Press the shutter release and both mirror and shutter
This is an important feature when the tripod mounted camera is used at slow or long exposure times and particularly also with use of long telephoto lenses. It eliminates the possibility of even the slightest mirror bounce which may affect image sharpness.
Move the Mirror-up Lever to the yellow "M.UP" square, after you have composed and focused your picture. This will raise the mirror and the viewfinder image will be blacked out. After use, return lever to normal (white square) position.
*When using the AE Prism Finder, set the Shutter Speed Dial to AEL. Press the shutter release halfway and then lock the mirror up. If set to A and the mirror is locked up, LT (long time) will appear in the finder display and correct exposure cannot be obtained. * When using a Leaf Shutter Lens, be sure to read the instructions accompanying it.
Infrared light rays - being of longer wavelength - focus at a slightly different plane and require the following adjustment:
1. Note the Red Index Mark against which you read your distance scale. The red infrared index mark is slightly to its right. 2. After focusing in the usual manner, read the distance scale and move it to the right to line up with the infrared index mark. * For proper filter and exposure information be sure to consult the instructions enclosed with infrared film. * The A300mm f/2.8 APO lens for 645, being also corrected for infrared light rays, does not need an Index Mark for infrared.
<Caution> When using the Hot-shoe, be sure to put an appropriate Safety Cover over the Xsync terminal so that you wont receive a high voltage electric shock if the terminal is accidentally touched. (A Safety Cover is put on the Xsync terminal when the camera leaves the factory.)
1. When using an electronic flash,
plug the synchronization cord into
the Sync Terminal and set the Shutter Speed Dial to 1/60 sec. or slower. * The Mamiya 645 PRO has an Xsync terminal. Attach a shoe-mount flash to the hot-shoe of the camera or the Left Hand Grip GL401 (optional).
* Do not use a flash unit specifically dedicated for another camera. It may damage your 645 PRO. * If you use a flash unit whose flash duration is slower than 1/ 1000 sec., set the shutter speed dial to 1/30 sec. or slower.
Flash Synchronization Chart
2. For MF and M bulbs, set the Shutter Speed Dial to 1/30 sec. or slower for the MF type, and 1/15 sec. or slower for the M type. * When using a flash, carefully read the instructions that come with the flash bulbs or flash unit to check for appropriate shutter speeds and to avoid malfunctions.

The Mamiya 645 PRO Tripod Socket accepts a standard 1/4" tripod mounting screw. For use with tripods having 3 / 8 " mounting screws, first unscrew the small black philips head retaining screw in the center of the tripod socket. Then remove the 1/4 bushing with a thin coin. To reinstall the 1/4 bushing, reverse the process

Eye-level Operation

Waist Level Operation
Hold the camera as shown in the illustration, with its base resting on your left hand, the right hand supporting it from the side and top. Press both elbows against your body and activate the shutter release with a smooth, steady stroke.
For waist level operation, it is desirable to have the Neck Strap attached and adjusted for your size. During exposure keep it taut and press the camera firmly against your body.
* Handholding the camera is even easier using the Power Drive Grip WG401 or kept Hand Grip GL401.
Attaching the Strap to the Camera
Removing the Strap from the Camera
1. While pushing down, pull out the Neck Strap Fastener (A) of the attaching clip.
2. Place the hole of the strap fastener (A) over the Neck Strap on the camera body as illustrated, and pull until it clicks and locks into place.
With your fingers, puII the Neck Strap Fastener (A) of the attaching clip upward and push part (B) in the direction of the arrow. The strap can now be removed. * When attaching the Strap to the Neck Strap Lug on the side of the camera with the Film Advance Crank, insert the neck strap fastener (A) into the lower part of the double slot.
6 x 4.5cm electronic focal-plane shutter SLR
Polaroid pack film (Polaroid 100, 600 series) 135 roll film in film cartridge Film loading Standard lenses.___ Lens mount Shutter Shutter speed Shutter release Mirror Viewfinder Focusing screen M645 bayonet mount (applicable to all M645 lenses) Moving coil, electronic controlled focal-plane shutter (Manual) 4 sec. - 1/1000 sec., B (T) (Auto) 8 sec. - 1/1,000 sec. (when the AE Prism Finder FE401 is used) Electromagnetic release. Selectable release lock or self-timer mode. lock~up capability. Interchangeable (Waist Level Finder N, Prism Finder FP401 and AE Prism Finder FE401 (Viewfinders for the M645 Super can be used) Fresnel Lens, accessory screens available (Same as the M645 Super) Daylight loading-interchangeable film holders with film speed dial available

Field of view

Film transport
Single turn winding by Film Advance Crank AC401. Variable crank start position (6 positions). @ Interchangeable (Power Drive Grip WG401 and Power Drive Grip N ). Progressive type: automatic reset. The counter for 120 and 220 film will be automatic. Activated by the Multiple Exposure Lever. Depth-of-field Scale provided on lens
Exposure counter Multiple exposure Depth-of-field Self-timer
: Electronic LED display Lights for 8 seconds, flashes for 2 seconds, before shutter release. j Has manual override.
Control and Electronic Cable Releases. The-Battery Check Button, indicates residual battery capacity in 3 stages. Time (T) photography can be taken. shoe, Flash synchronization at 1/60 sec. or slower speeds

Battery check

Back cover Power supply Others Dimenslons & Weight Body with 120 Roll Film Holder HA401 With Waist Level Finder N, 80mm f2.8N With Prism Finder FP401, 80mm f/2.8N With AE Prism Finder FE401, 80mm f/2.8N With Power Drive Grip WG401, AE Prism Finder FE40 1, 80mm f/2.8N 124mm (W) x102.5mm (H) x 124mm (D) 124mm (W) x106 mm (H) x 158mm (D) 124mm (W) x128 mm (H) x 170mm (D) 124mm (W) x135 mm (H) x 170mm (D) 172mm (W) x135 mm (H) x 170mm (D) 36 980g 1,345g 1,530g 1,545g 1,800g (Without Battery) With Neck Strap.
* If the camera should fail to function properly, please check the following:
1. The Shutter Release Button does not move.
Push the Battery Check Button. If the lamp does not light, check: Is a Battery in the camera? If yes, is it correctly inserted? (Polarity) Is it dead? If the lamp does light, check: Has the Film Holder Dark Slide been pulled? Is the Shutter Release Selector in the locked (Red Dot) position? If so, move it to the White Square and try again Is the Shutter Speed Dial in the A or AEL position? If so, turn to other setting and try again.
2. The finder is black or very dark. Has the Lens Cap been removed? Is the Mirror-up Lever in the M.UP position? If so, turn the lever to the White Square. Is the AM setting on the lens at M" (Depth of Field Preview)? If so, move it to A. 3. The Roll Film Holder cannot be removed from the camera body. Insert the Dark Slide. 4. The developed film has fewer exposures than specified. Most likely the Start Mark had not been aligned properly when the film was loaded. (See load ing instructions page 20 )
5. The Film Advance Crank continues to turn and does
not stop. Was the Roll Film Insert placed in the Roll Film Holder? Was the empty fim spool left in the upper compartment?
Things to Watch * Cold Temperature Photography a. Use a fresh lithium battery
b. Utilize the External Battery Case accessory. (Permits battery to be placed inside clothing). Batteries that fail at low temperatures may still be used at normal temperatures. However frequent temperature changes shortens battery life. c. Avoid sudden temperature changes when going indoors, to prevent moisture condensation on camera and lenses. (Also important for film protection).

* When using the AE Prism Finder FE401 When using this finder it is imperative that the Film Speed Dial on the Roll Film Holder is properly set for the ISO number of the loaded film, as it interfaces with this finder. If not done, wrong exposures may result. *When the mirror is locked in the up position. * The Focal Plane Shutter Curtain may be damaged if the camera faces strong light sources, especially the sun. Return mirror to normal position or cap lens to prevent such damage.
The AE Prism Finder FE401 The Mamiya AE (Automatic Exposure) Prism Finder FE401 pentaprism guarantees a true, upright image and features built-in electronic shutter control which, ensures aperture-priority, TTL automatic exposure metering while in the A or AEL mode. < 3-Way Metering System> The FE401 comes with three metering modes: average metering (AV), spot metering (SP), and AV-SP metering capable of automatically selecting AV or SP according to subject conditions. The LED display in the viewfinder indicates correct exposure If you forget to extract the Dark Slide when the finder is being used with the 645 PRO, an LED will flash a warning. The Power Drive Grip WG401 The Power Drive Grip WG401 is integral with the winder and hand grip, enabling quick and continuous exposures to be taken: frames can be advanced (about 2 frames/sec.). Usable with any of three recently developed leaf shutter lenses, it can be connected with the lens and winder with the Grip Connecter PL401, thus automatically interlocking it with the lens.
Roll Film Holders 120 Roll Film Holder HARoll Film Holder HBRoll Film Holder HC401 (with Panoramic Adapter) Polaroid Land Pack Film Holder HP401
Interchangeable Lenses Wide-angle Lenses Telephoto Lenses
: 35mm f/3.5N, 45mm f/2.8N,

55mm f/2.8N

: 150mm f/3.5N, A150mm f/2.8,
210mm f/4N ULD300mm f/5.6N, A300mm f/2.8AP0, 500mm f/5.6 Standard Lenses : 80mm f/1.9N, 80mm f/2.8N, 110mm W2.8N Zoom Lenses : Zoom 55 - 110mm f/4.5N, Zoom ULD105 - 210mm f/4.5 Special Effect Lenses: Fish-eye ULD24mm f/4, Shift 50mm f/4, Macro 80mm f/4N Soft 145mm f/4 Leaf Shutter Lenses : A55mm f/2.8N/L, A80mm f/2.8N/L, A150mm f/3.8N/L TeleConverter : 2 x Tele-Converter
Periodic Check When the camera is not used for a long period of time, remove the battery and any film from the camera. Avoid storing the camera for prolonged periods of time in a damp or salty atmosphere. (Color film should be stored at the manufacturers recommended temperatures.) Since cameras are precision instruments, avoid shocks and rough handling. When camera and lens are stored for a long time, periodically exercise the shutter(s) at various speeds and also turn the lens diaphragms. Cleaning Never touch the surface coated mirror. Clean dust particles with a blower and optical surfaces with lens cleaning tissue and lens cleaner. Periodically check the camera to make sure that it is in good working order, especially before an important assignment. Check the battery, flash synchronization, mirror and shutter movement, film advance, diaphragm operation, etc. Should any malfunction occur or if the camera has been dropped, jarred or become wet, do not attempt to fix it yourself but send it to the Service Department of your Mamiya distributor.