Important points when selecting an installation site
Do not install your machine in areas that are: damp, humid, or very dusty exposed to direct sunlight poorly ventilated subject to extreme temperature or humidity changes, e.g., near an air conditioner or heater. Be sure to allow the required space around the 8" (20 cm) machine for servicing and proper ventilation.

4" (10 cm)

Cautions on handling the machine
Be careful in handling the machine as follows to maintain the performance of this machine. Do not drop the machine, subject it to shock or strike it against any object. Do not expose the drum cartridge to direct sunlight. Doing so will damage the surface (green portion) of the drum cartridge, causing smudges on copies. Store spare supplies such as drum cartridges and TD (Toner/Developer) cartridges in a cool dry place without removing from the package before use. If they are exposed to direct sunlight, or excessive heat, poor copies may result. Do not touch the surface (green portion) of the drum cartridge. Scratches or smudges on the drum will cause dirty copies.

Supply and Consumables

The supply of spare parts for a repair of the appliance is guaranteed for at least 7 years following the termination of production. Spare parts are those parts of the apparatus which may break down within the scope of ordinary use of the product, whereas those parts which normally exceed the life of the product are not considered spare parts. Consumables also, are available for 7 years following the termination of production.
Trademark acknowledgements
Microsoft, Windows, Windows 98, Windows Me, Windows 2000, Windows XP, Windows Vista and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the U.S.A. and other countries. Macintosh is a trademark of Apple Inc., registered in the U.S. and other countries. IBM, PC/AT, and PowerPC are trademarks of International Business Machines Corporation. Adobe, the Adobe logo, Acrobat, the Adobe PDF logo, and Reader are registered trademarks or trademarks of Adobe Systems Incorporated in the United States and other countries. Sharpdesk is a trademark of Sharp Corporation. All other trademarks and copyrights are the property of their respective owners.

SOFTWARE LICENSE

The SOFTWARE LICENSE will appear when you install the software from the CDROM. By using all or any portion of the software on the CD-ROM or in the machine, you are agreeing to be bound by the terms of the SOFTWARE LICENSE.
ENVIRONMENTAL INFORMATION

For users in the USA

Products that have earned the ENERGY STAR are designed to protect the environment through superior energy efficiency.

Laser information

Envelopes

Do not use the following envelopes, as misfeeds will occur. Envelopes with metal tabs, clasps, strings, holes, or windows. Envelopes with rough fibers, carbon paper, or glossy surfaces. Envelopes with two or more flaps. Envelopes with tape, film, or paper attached to the flap. Envelopes with a fold in the flap. Envelopes with glue on the flap to be moistened for sealing. Envelopes with labels or stamps. Envelopes that are slightly inflated with air. Envelopes with glue protruding from the seal area. Envelopes with part of the seal area peeled off. Be sure to select com9, com10 or Monarch in the paper size setting of the printer driver. (For detailed information on the printer driver, refer to the online manual.)
Loading paper in the bypass tray
Paper must be fed narrow side first into the feed slot. Special papers such as transparency film, labels, and envelopes must be fed one sheet at a time through the bypass tray. When copying onto transparency film, remove each copy promptly. Do not let copies stack up.
Open the bypass tray and extend the tray.
To close the bypass tray, perform step 1 and then step 2 in the illustration and push the round projections at the right of the tray until they click.
Set the bypass tray paper guides to the paper width. Insert the paper (print face down) all the way into the bypass tray.

Print face

Press the [TRAY SELECT] key (
) to select the bypass tray.
Note for loading thick paper
Confirm that user program 29 is set to "2 (HEAVY PAPER)" when using thick paper. (See page 65.)
CHANGING A TRAY'S PAPER SIZE SETTING
Follow these steps to change a tray's paper size setting.
The paper size setting cannot be changed when the machine has stopped temporarily due to running out of paper or a misfeed. During printing (even in copy mode), the paper size setting cannot be changed.
Press the [MENU] key. Press the [ ] key ( ) or [ ] key ( ) until "PAPER SIZE" appears, and then press the [ENTER] key. Press the [ ] key ( ) or [ ] key ( select the tray, and then press the [ENTER] key. ) to

PAPER SIZE 1:TRAY1

Press the [ ] key ( ) or [ ] key ( ) to select the paper size, and then press the [ENTER] key.
The paper size changes as follows each time the [ ] key ( ) or [ ] key ( ) is pressed: "8.5x14""8.5x13""8.5x11""5.5x8.5" "A4""B5""A5".

TRAY1 1:8.5X14

When you have finished configuring the tray's paper size setting, press the [MENU] key.
Squeeze the lock lever of the front guide and slide the front guide to match the width of the paper, and move the left guide to the appropriate slot as marked on the tray.

Press the [E-SORT/SP.FUN] key until "SORT" appears and then press the [ENTER] key.
Press the [ ] key ( ) to move " " to the "ON" position and then the [ENTER] key.
If the memory becomes full
If the memory becomes full while scanning the originals, "MEMORY FULL, PRESS START TO RESUME" will appear in the display, and the machine will stop copying. To copy the originals that have been scanned up to that point, press the [START] key ( ). To clear the data that has been scanned into memory, press the [CLEAR ALL] key ( ) or the [CLEAR] key ( ).
Offset function during sort copy
The offset function shifts the position of each set of copies in the paper output tray for easy separation. The offset function can be changed with "OFFSET FUNCTION" in the user programs. (p.63)
When offset function is disabled
COPYING MULTIPLE ORIGINALS ONTO A SINGLE SHEET OF PAPER (2 IN 1 copy)
Multiple originals can be copied onto a single sheet of paper in a selected layout pattern. This function is convenient for compiling multi-page reference materials into a compact format, or for providing an overview of all pages of a document on a single page.

Pattern 1

Pattern 2
An appropriate ratio setting will be automatically selected based on the size of the originals, the size of the paper. When using the document glass, reduction is possible to 25%. When using the RSPF, reduction is possible to 50%. Certain combinations of original size and paper size may result in images being cut off. 2 IN 1 copying cannot be used in combination with the margin shift copying. The 2 IN 1 layout pattern can be changed with "LAYOUT IN 2IN1" in the user programs (p.63). The bypass tray cannot be used for 2 IN 1 copying.
Place the first original. (p.24) Press the [E-SORT/SP.FUN] key until "2IN1" appears and then press the [ENTER] key.

SPECIAL FUNCTION 2IN1

2IN1 ON
Press the [ ] key ( ) or [ ] key ( ) to select the original size and then press the [ENTER] key.
Repeat step 6 until all originals have been scanned. Copies will be output each time two originals have been scanned. When the number of original pages is odd and "[START] : NEXT SCAN [#] : START PRINT" appears, press the [ ] key after all pages have been scanned.

To clear the data in memory, press the [CLEAR] key ( ). When the [CLEAR] key ( ) is pressed, the number of copies setting is also cleared. To cancel 2 IN 1 copying, press the [CLEAR] key ( ). To cancel 2 IN 1 copy mode, press the [CLEAR ALL] key ( ).
Place the originals. (p.25) Press the [E-SORT/SP.FUN] key until "2IN1" appears and then press the [ENTER] key.
Select the number of copies and any other settings, and press the [START] key ( ).
The copy is delivered to the paper output tray.
To cancel 2 IN 1 copying, press the [CLEAR] key ( ). To cancel 2 IN 1 copy mode, press the [CLEAR ALL] key (
CREATING MARGINS WHEN COPYING

(Margin shift)

The margin shift function is used to automatically shift the text or image or the copy paper approximately 1/2". As shown below, LONG EDGE or SHORT EDGE can be selected.
SHORT EDGE RSPF LONG EDGE

Margin Copy

Margin

Document glass Original

This feature cannot be used with the 2 IN 1 feature. The margin width can be changed with "MARGIN WIDTH" in the user programs. (p.64) Note that a margin is created by shifting the image, and thus if the image is shifted too far, the edge of the image may be cut off.
Place the original(s). Press the [E-SORT/SP.FUN] key until "MARGIN SHIFT" appears and then press the [ENTER] key.
SPECIAL FUNCTION MARGIN SHIFT

MARGIN SHIFT ON OFF

Press the [ ] key ( ) or [ ] key ( ) to select the margin position and then press the [ENTER] key.
Select "LONG EDGE" or "SHORT EDGE". For the margin position, see the previous page.

MARGIN SHIFT LONG EDGE

To cancel margin shift copying, press the [CLEAR] key ( ). To cancel margin shift mode, press the [CLEAR ALL] key ( ).

Chapter 5

INSTALLING THE SOFTWARE
This chapter explains how to install and configure the software that is required for the printer and scanner functions of the machine. The procedure for viewing the Online Manual is also explained.
The explanations of screens and procedures in this manual are primarily for Windows XP. This manual refers to the CD-ROM that accompanied the machine simply as "CD-ROM".

SOFTWARE

The CD-ROM that accompanies the machine contains the following software:

MFP driver

Printer driver
The printer driver enables you to use the printer function of the machine. The printer driver includes the Print Status Window. This is a utility that monitors the machine and informs you of the printing status, the name of the document currently being printed, and error messages. Please note that the Print Status Window does not operate when the machine is used as a network printer.

Scanner driver*

The scanner driver allows you to use the scanning function of the machine with TWAIN-compliant and WIA-compliant applications.

Using the machine with a USB connection
The USB cable must not be connected to the machine. Make sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If this happens, click the "Cancel" button to close the window and disconnect the cable.
The cable will be connected in step 13.
Insert the CD-ROM into your computer's CD-ROM drive. Click the "start" button, click "My Computer" ( double-click the CD-ROM icon ( ). ), and then
In Windows Vista, click the "Start" button, click "Computer", and then double-click the CD-ROM icon. In Windows 98/Me/2000, double-click "My Computer", and then double-click the CD-ROM icon.
Double-click the "setup" icon (
In Windows Vista, if a message screen appears asking you for confirmation, click "Allow".
The "SOFTWARE LICENSE" window will appear. Make sure that you understand the contents of the software license, and then click the "Yes" button.
You can show the "SOFTWARE LICENSE" in a different language by selecting the desired language from the language menu. To install the software in the selected language, continue the installation with that language selected.
Read the "Readme First" in the "Welcome" window and then click the "Next" button. To install all of the software, click the "Standard" button and go to step 12. To install particular packages, click the "Custom" button and go to next step.
Click the "MFP Driver" button.
Click the "Display Readme" button to show information on packages that are selected.
The files required for installation of the MFP driver are copied.
Follow the on-screen instructions. When "The installation of the SHARP software is complete." appears, click the "OK" button.
If you are using Windows Vista and a security warning window appears, be sure to click "Install this driver software anyway". If you are running Windows 2000/XP and a warning message appears regarding the Windows logo test or digital signature, be sure to click "Continue Anyway" or "Yes".

Select "SHARP AL-XXXX" and click the "Properties" button.
In Windows Me, right click "SHARP AL-XXXX" and click "Properties" in the pop-up menu.
Select "SC1:" from the "Scanner events" pull-down menu.
Select "Sharp Button Manager O" in "Send to this application".
If other applications are shown, deselect the checkboxes for the other applications and leave only the Button Manager checkbox selected.
Repeat Steps 5 through 7 to link Button Manager to "SC2:" through "SC6:".
Select "SC2:" from the "Scanner events" pull-down menu. Select "Sharp Button Manager O" in "Send to this application" and click the "Apply" button. Do the same for each ScanMenu through "SC6:". When the settings have been completed, click the "OK" button to close the screen. Button Manager is now linked to the scan menu (1 through 6). The scan settings for each of scan menus 1 through 6 can be changed with the setting window of Button Manager. For the factory default settings of the scan menu and the procedures for configuring Button Manager settings, see "Button Manager Settings" in the Online Manual.

Chapter 6

PRINTER/SCANNER FUNCTIONS
The machine includes a USB connector and a LAN connector as standard equipment. When the USB connector is used, the printer and scanner functions can be used. When the LAN connector is used, the printer function can be used. The machine has the following features: High-speed data transfer (when connected to a USB 2.0 connector) ROPM* function
* ROPM is an acronym for "Rip Once Print Many" processing. The ROPM function stores multiple pages of print data in memory before printing. When printing multiple copies, this eliminates the need for the computer to repeatedly transmit the print data.
To use the machine as a printer or scanner, the printer driver or scanner driver must first be installed as explained in the "INSTALLING THE SOFTWARE".
If a problem occurs in printer or scanner mode, see the Online Manual. When using USB 2.0 (Hi-Speed mode), be sure to read "System requirements for USB 2.0 (Hi-Speed mode)" (below) to verify that your system and the machine settings are configured appropriately.

System requirements for USB 2.0 (Hi-Speed mode)
The following system is required to use USB 2.0 (Hi-Speed mode): Your computer must be running Windows 2000 Professional/XP/Vista and the Microsoft USB 2.0 driver must be installed. The "USB 2.0 MODE SWITCH" setting in the machine's user programs must be set to "HI-SPEED". To change the setting, see "USB 2.0 MODE SWITCH" in the user programs (p.66).
* Even when the Microsoft USB 2.0 driver is installed, some USB 2.0 expansion cards are not capable of attaining the speed stipulated by the Hi-Speed standard. This problem can often be fixed by installing a more recent driver for the card. To obtain the most recent driver for your card, contact the card's manufacturer.

USING THE PRINTER MODE

The procedure for loading paper for printing is the same as for loading copy paper. See "LOADING PAPER" (p.18).
Print jobs received while the machine is copying will be stored in memory. When the copy job is finished, the print jobs will begin printing. Printing is not possible when the front or side cover is opened for machine maintenance, or when a misfeed occurs or the machine runs out of paper or toner, or when the drum cartridge reaches its replacement time.
BASIC PROCEDURE FOR PRINTING
The basic procedure for printing is explained in the following. To use convenient printer functions, see the "Online Manual" or the printer driver help file.
Make sure that paper is loaded in the tray.
The procedure for loading paper is the same as for copying. See "LOADING PAPER" (p.18) and make sure that the paper you wish to use is loaded.
Make sure that the paper size setting on the machine is the same as the paper size set in the printer driver.
Open the file that you wish to print and select "Print" from the File menu. Make sure that the printer driver for the machine is selected, and select print settings in the printer driver.
For information on the settings in the printer driver, see the "Online Manual" or the printer driver help file.
Click the "Print" button or the "OK" button to begin printing.
The print job will be delivered to the paper output tray.

Canceling a print job

Select printer mode with the [MODE SELECT] key on the operation panel of the machine, and then press the [CLEAR] key ( ) or the [CLEAR ALL] key ( ). "CANCEL PRINT JOB?" will appear in the display. Make sure that a checkmark appears in front of "YES" and press the [ENTER] key.

MARGIN WIDTH

1: 1/4" 2: 1/2" 3: 3/4" 4: 1" 1: 30% 2: 40% 3: 50% 4: 60% 5: 70%

MEM. FOR PRINTER

AUTO KEY REPEAT

KEY PRESS TIME

1: NORMAL 2: 0.5 SEC. 3: 1.0 SEC. 4: 1.5 SEC. 5: 2.0 SEC. 1: LOW 2: HIGH 3: OFF 1: ON 2: OFF
KEY TOUCH SOUND SOUND AT DEFAULT

TONER SAVE MODE

!007-user settings.fm 65
1: SPF/RSPF (Adjustment to 5 levels is possible.) AE LEVEL ADJUST 2: DOCUMENT GLASS (Adjustment to 5 levels is possible.) 1: AMERICAN ENGLISH 2: ENGLISH 3: FRENCH 4: SPANISH 1: YES 2: NO 1: ON 2: OFF
This is used to adjust the exposure level. The automatic exposure level can be adjusted separately for the document glass and the RSPF. For the procedure for adjusting the exposure and guidelines for numeric values, see page 28. The factory default setting for the exposure level is center. This is used to set the language used in the display. This is used to return all settings to the factory default settings. Use this setting to enable or disable sort auto select mode. You can set the operation that takes place if the [START] key ( ) is pressed when the RSPF is not completely closed. (For details on the "Check RSPF open function", see page 25.) Set the allowed paper sizes for copying from the bypass tray. When "5.5x8.5" is selected, a copy of a letter size original will only be printed up to invoice size. Select whether copying is only allowed when the polygon motor is rotating, or also when the polygon motor is stopped. Set the temperature of the fusing unit when the bypass tray is used. Set the contrast of the display.

LANGUAGE

RESET FACTORY SORT AUTO SELECT

CHECK RSPF OPEN

VALID COPY WIDTH

1: 8.5x11 2: 5.5x8.5

LSU SETTING

PAPER TYPE

1: PLAIN PAPER 2: HEAVY PAPER 1: LIGHTER 2: LIGHT 3: NORMAL 4: DARK 5: DARKER

DISPLAY CONTRAST

Print mode

FORCED OUTPUT

When this function is enabled, printing in printer mode will automatically continue using a different size of paper if the specified size of paper runs out in all trays. This feature does not function in copy mode.

USB 2.0 MODE SWITCH*

This sets the USB 2.0 data transfer speed. To obtain the fastest speed when using the USB 2.0 connector, first verify that your computer meets the system requirements (operating system and driver), and then use this program to 1: FULL-SPEED change the USB 2.0 mode to 2: HI-SPEED "Hi-Speed". Note that the setting should not be changed while running a TWAIN driver. (For the system requirements, see "System requirements for USB 2.0 (Hi-Speed mode)" (p.57).) If the paper runs out during printing and there is paper of the same size in another tray, this function automatically switches to that tray (excluding the bypass tray). The function can be disabled.

For problems related to the printer and scanner functions, see the online manual.

DISPLAY MESSAGES

When the following indicators light up or blink on the operation panel or the following alphanumeric codes appear in the display, solve the problem immediately referring to both the table below and the indicated page.
Be sure to use only genuine SHARP parts and supplies.
Indication Lamp indicator Display BYPASS : ADD PAPER Tray location Blinks TRAY<*> : ADD PAPER indicator CLOSE PAPER TRAY<*> CLEAR PAPER JAM. SPF/RSPF JAM. FRONT OR SIDE COVER OPEN. CLOSE COVERS. CLOSE THE SPF/ RSPF COVER.

Error Blinks indicator

Cause and remedy
The indicated paper tray is not attached, is attached incorrectly, or has run out of paper. (The tray is indicated in <*>.) A paper misfeed has occurred. Remove the misfeed as explained in "MISFEED REMOVAL". The cover is open. Close the cover.
The document feeder cover is open. Close the document feeder cover. The TD (Toner/Developer) cartridge is REPLACE THE TD empty. Replace the TD cartridge with a CARTRIDGE. new cartridge. When [L1-00] appears, the scan head locking switch is locked. Turn off the power, release the scan head locking switch, and turn the power back on. SYSTEM ERROR [XX - XX] REFER The machine will not function. Turn the TO USER GUIDE power switch off, wait about 10 seconds, and then turn on the switch again. If this does not clear the error, remove the power cord from the outlet, and contact your SHARP service center.
Indication Lamp indicator Display

INSTALL A TD CARTRIDGE.

The TD (Toner/Developer) cartridge is not installed correctly. Reinstall the TD cartridge. Blinks REPLACE THE The drum cartridge has reached the DRUM end of its life. Replace it with a new Error CARTRIDGE. drum cartridge. indicator TD CARTRIDGE Toner is low. Purchase a new TD IS NEAR EMPTY. (Toner/Developer) cartridge. Steadily A DRUM Less than 1000 sheets can be printed lit CARTRIDGE WILL with the current drum cartridge. BE NEEDED SOON. Purchase a new drum cartridge. MEMORY FULL, PRESS START TO Data is being held in memory. Print the RESUME. data or clear it from memory. NO 2-SIDED COPY FROM BYPASS Two sided printing or 2 IN 1 copying is TRAY. selected when the bypass tray is already selected ,or the bypass tray is selected when two-sided printing or 2 IN 1 copying is already selected. NO 2IN1 COPY FROM The bypass tray cannot be used. Press BYPASS TRAY. the [TRAY SELECT] key ( ) to select a paper tray. 2 IN 1 copy and margin shift cannot be NO 2IN1 COPY WITH MARGIN SHIFT. used in combination. Cancel the function that was selected last. COPY RATIO CAN NOT BE Copy ratio can not be changed in 2 IN CHANGED IN 2IN1. 1 copy. This appears if you attempt to change THIS MENU IS NOT SELECTABLE a user program setting while a print job WITH DATA. is in progress. There is no paper for printing. Press the [MODE SELECT] key to switch to printer mode and follow the instructions NO XXXX SIZE TRAY in the display. ("XXXX" indicates paper size) An original remains on the document glass, or the original is too thick to scan. Remove the original. CHECK SPF/RSPF. If the message is not cleared when there START TO RESUME. is no original on the document glass, the underside of the RSPF is dirty. Clean the underside of the RSPF. (especially areas where black lines appear.) Printing is not possible if the paper size setting is different from the size of paper loaded in the tray. Load the same size of paper as the paper size LOAD XXXX PAPER INTO TRAY<*>. setting and then press the [START] key ( ). Printing will begin. ("XXXX" indicates paper size. The tray is indicated in <*>.) The machine is not correctly connected NO PC COMMUNICATION; CHECK to the computer. Check the cable CABLE. (when using the scanner function).

Page : 3/4 Date Revised : Mar. 1. 2007 Date Issued : Sep. 1. 2003 MSDS No. F-01231
8.EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering Measures Ventilation : Not required under intended use. Exposure Limit Values OSHA-PEL(USA) : 15mg/m3 (Total Dust), 5mg/m3 (Respirable Dust) ACGIH-TLV(USA) : 10mg/m3 (Total Dust), 3mg/m3 (Respirable Dust) Personal Protective Equipment Respiratory Protection : Not required under intended use. Hand Protection : Not required under intended use. Eye Protection : Not required under intended use. Skin Protection : Not required under intended use. Other Protective Equipment : Use of a dust mask and goggles are recommended when handling a large quantity of toner or during long term exposure, as with any non-toxic dust. 9.PHYSICAL AND CHEMICAL PROPERTIES Appearance Physical State : Solid Form : Powder Ph : Not applicable Boiling / Melting Point : Not applicable Softening Point(C) : 130 Flash Point(C) : Not applicable Ignition Point(C ) : No data Explosion Properties : No data Density(g/cm) : 1.1 Solubility in Water : Negligible

Color : Black

Odor : faint odor
10.STABILITY AND REACTIVITY Stability : Stable Hazardous Reactions : Dust explosion, like most finely divided organic powders. Conditions to Avoid : Electric discharge, throwing into fire. Materials to Avoid : Oxidizing Materials Hazardous Decomposition Products : CO, CO2 and NOX Further Information : None 11.TOXICOLOGICAL INFORMATION Acute Toxicity Ingestion(oral) : LD50 > 2000mg/kg (Rats) Inhalation : LC50>5.14mg/L Rats Eye irritation : Not an irritant (Rabbits) Skin irritation : Not an irritant (Rabbits) Skin sensitizer : No sensitization Mutagenicity : Negative(Ames Test). Carcinogenicity : In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human carcinogen). This classification is given to chemicals for which there is inadequate human evidence, but sufficient animal evidence on which to base an opinion of carcinogenicity. The classification is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce particle overload of the lung. Studies performed in animal models other than rats did not show any association between carbon black

Page : 4/4

Chronic Effect
Date Revised : Mar. 1. 2007 Date Issued : Sep. 1. 2003 MSDS No. F-01231 and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats. : In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of the rats in the high concentration (16mg/m3) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle (4mg/m3) exposure group, but no pulmonary change was reported in the lowest (1mg/m3) exposure group, the most relevant level to potential human exposures.

USB.. 42, 45, 57, 66 USB connector.. 9, 46 User programs - Copy mode.. 62 - Print mode.. 66 User settings. 62 Using the manual. 6 Using the printer mode. 58 Using the scanner mode. 59
Scan head locking switch.. 13 Scanner driver.. 40 Scanning from the operation panel. 59 Scanning from your computer.. 60 Scanning unit (scan head). 16 Selecting a setting for a user program.. 67 Selecting the tray.. 23 Set the IP address.. 48 Setting the number of copies. 27 Setting up button manager.. 53 Sharpdesk.. 40 Short edge.. 30 Side cover.. 9, 78, 82 Side cover open button.. 9 Sort copy.. 33 Special papers.. 19 Specifications.. 91 Standard paper.. 18 [START] key.. 11, 24, 25 Supply list... 90 System requirements for USB 2.0. 57

Zoom setting.. 29

INDEX BY PURPOSE

Preparations

Installation the machine, preparing.. 12 Packed components and accessories, checking.. 12 Paper, loading - Bypass tray.. 21 - Paper tray. 19 Power, turn off.. 17 Power, turn on.. 16 Scan head locking switch, releasing.. 13 TD (Toner/Developer) cartridge, Installing.. 14 Tray's paper size, setting. 23 User program, setting.. 62

Connecting the computer

Basic procedure for printing. Button Manager, setting up - Windows 98/Me/2000. - Windows XP/Vista.. Installing the software-Network connection.. Installing the software.. Online manual, using. Print job, canceling.. Printer mode, using. Scanner mode, using.. Scanning from your computer.. Scanning using the keys on the machine.. Checking the total count and drum cartridge life.. Cleaning the machine - Cabinet.. - Document glass.. - Drum cartridge.. - RSPF.. - TD (Toner/Developer) cartridge.. - Transfer charger. Drum cartridge, replacing.. Misfeeds, removing - Fusing area.. - RSPF.. - Paper feed area.. - Transport area.. TD (Toner/Developer) cartridge, replacing.. 59
Troubleshooting and maintenance

Making copies

Copying - Document glass.. - RSPF.. Enlarging/reducing copies. Exposure, adjusting. Exposure, selecting. Setting the number of copies. Tray, selecting.. 2 IN 1 copying, using - Document glass.. - RSPF.. Automatic two-sided copying - Document glass.. - RSPF.. Margin shift, using.. Sort copying, using - Document glass.. - RSPF.. 27
Using convenient copy functions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING:

FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the users authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Notice for Users in U.S.A. Declaration of Conformity SHARP Digital Multifunctional System, AL-2050CS
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495 TEL: 1-800-BE-SHARP
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental consideration. For disposal or recycling information, please contact your local authorities, the Electronics Industries Alliance: www.eiae.org, the lamp recycling organization: www.lamprecycle.org or Sharp at 1-800-BE-SHARP. (For U.S.A. Only)

Sharp AL-2050CS Multifunction Digital Desktop Duplex Monochrome Laser Printer Copy Machine

1/Sep2008 4:57 PM

About Us

Contact Us

View Specials

Feedback

Return Policy

View Cart

Order Status

Email Sign-Up

Advanced Search Subscribe via RSS
Items in Cart: 0 Sub-Total: $0.00 Log In
Hello, Guest! ( If you are already a customer, please log in. )

All Products

Tell A Friend
You Are Here: Home >> Copy Machines >> Sharp Copy Machines >> Sharp AL-2050CS Multifunction Digital Desktop Duplex Monochrome Laser Printer Copy Machine
Sharp AL-2050CS Multifunction Digital Desktop Duplex Monochrome Laser Printer Copy Machine [AL-2050CS]

Categories

Price: $589.99 * Quantity: 1
Air Conditioners Binding Machines and Supplies Breakroom Supplies In The Cafeteria Copy Machines - Brother Copy Machines - Canon Copy machines - Ricoh Copy Machines - Samsung Copy machines - Xerox Copy Machines - Sharp Copy Machines Cunsumer Electronics Electronic White Boards Fabric Care Fax Machines Laminating Machines Letter Paper Folding Machines Money Handling Equipment Office Cleaning Products Office Equipment & supplies Paper & Booklet Cutters, Trimmers & Guillotines Paper Handling Equpment & Supplies Printers Sales Cash Registers & Euipment Scanners Shredders Telephones & Communications Time / Date Stamp Recorders Toners & Supplies

Notifications

* = Required Field
Click Here to Enlarge Image Sharp AL-2050CS Multifunction Digital Desktop Duplex Monochrome Laser Printer Copy Machine
20PPM 600DPI DUPLEX COPY PRINT Model#: AL2050CS Unique network and paper handling features make the AL-2050CS the perfect choice for any small office. Sharp's AL-2050CS laser copier/printer/scanner is the perfect addition to any home or small business setting. This multifunctional device has two 250-sheet paper trays, a 50-sheet reversing document feeder to make hands free 2-sided copies and offset sorting. The AL-2050CS outputs 20 copies per minute or up to 16 PCL6 printouts per minute. In addition to a standard USB connection, the built-in network card allows the user to easily share the printing capabilities of this device with others on their network. The unique network and paper handling features of the AL-2050CS digital copier/printer/scanner make it the perfect choice for any small office. This simple-to-use office multifunction copier offers a 20 page-perminute copier, 20 pageper- minute printer and sheet fed color scanner. Standard features include: offset stacking to separate sets, electronic sorting, hands-free two-sided/duplex copying, two-sided printouts, 50-page automatic document feeder and network ethernet conncetion for shared printing.
250-sheet paper trays 50-sheet reversing document feeder offset sorting 20 copies per minute

View All Brands

http://www.a1officeproducts.com/content-product_info/product_id-2457on_digital_desktop_duplex_monochrome_laser_printer_copy_machine.html

Page 1 of 2

Notify me of updates to Sharp AL-2050CS Multifunction Digital Desktop Duplex Monochrome Laser Printer Copy Machine

Search By Brand

Please Select
Unique network and paper handling features make the AL-2050CS the perfect choice for any small office. Product Type: Network Laser Copier/Printer/Scanner

Specials

Kyocera Mita Ecosys FSC5015N Network 16 PPM Color Laser Printer # 1102HJ2US0 Price: $999.99 Now: $599.99
Prints: Up to 20 ppm Copies: Up to 20 cpm Scans: Up to 600 x 1200 dpi resolution Network ready Duplexing (2-sided printing and copying) 500-sheet paper capacity E-sorting and offset stacking easily produce groups of multi-paged documents Cable NOT included
For more specials click here!

New Products

Royal PX-3MX Crosscut and Media Desktop Shredder Price: $49.99
Features: 20 Copies or 20 Prints per Minute for quick output of any type. 50-page Reversing Automatic Document Feeder for handsfree two-sided copies. Two,250-Sheet Paper Trays and One 50-Sheet Bypass to easily handle multiple paper types and sizes. E-sorting and Offset Stacking easily produce groups of multi-paged documents. Standard USB and Built-In Network Card for printing individually or share via a network. Full-Color USB Scanning up-to-9600 dpi for accurate image scanning. Two-Sided Copies or Prints to conserve paper or reduce document size. SharpDesk is an innovative software solution for managing scanned documents and images.

Tag Cloud

Laser Printer
Monochrome Laser Printer Network
Laser Printer Network Printers

Site Maps

HTML Site Map XML Site Map

Share This!

Copiers Speed Up to 20 cpm Print Speed Up to 20 ppm Auto Document Feeder Yes Reduce/Enlarge 25% to 400% Network Ready Yes Warm-Up Time Approx. 9.6 seconds Paper Capacity 500 sheets Max. Paper Size 8.5" x 14" Duplexing Yes Copy Max. Size 8.5" x 14" Copy Min. Size 3.5" x 5.5" Connectivity USB 2.0, Ethernet Other Features E-sorting and offset stacking, SharpDesk software solution Compatible Cartridges AL-110TD Toner (479197) Dimensions 18.5"H x 20.4"W x 19.8"D, 50.7 lbs. Warranty 3-year mfr. limited warranty

Bookmark This!

Bookmark This Product
Shipping Weight : 57.87 lb Shipping Dimensions : 22.5" Height x 22.5" Width x 24.5" Depth Conditions of Use Contact Us FAQ Feedback Privacy Notice Shipping & Returns
Copyright 2007 A 1 Office Products. All Rights Reserved. Ecommerce Shopping Cart by Captures Subscribe via Products RSS. What is This? Learn More We Accept Google Checkout. What is This? Learn More

Page 2 of 2