Do not use a hand-held phone while driving; park the vehicle first.

Switch Off In Hospitals

Follow any regulations or rules. Switch phone off near medical equipment.

Switch Off On Aircraft

Wireless phones can cause interference. Using them on aircraft is illegal.
Switch Off When Refueling
Do not use phone at a refueling point. Do not use near fuel or chemicals.

Switch Off Near Blasting

Do not use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.

Interference

All wireless phones may get interference which could affect performance.

Use Sensibly

Use only in the normal position (to ear). Do not touch the antenna unnecessarily.

Qualified Service

Only qualified service personnel must install or repair equipment.
Accessories and Batteries
Use only approved accessories and batteries. Do not connect incompatible products.
FCC/Industry Canada Notice
Your phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Using this Guide

The wireless phone described in this guide is approved for use in TDMA and AMPS networks.

Network services

A number of features included in this guide are called network services. They are special services provided by wireless service providers. Before you can take advantage of any of these network services, you must subscribe to the service(s) from your home service provider and obtain instructions for their use.

Updates

The latest version of this User Guide may be found on Nokias World Wide Web site at www.nokia.ca.
2. Battery installation and charging
Before you can use your new phone, you need to attach and charge the battery.

Attaching the battery

To attach the battery, place it on the back of the phone as shown and slide it toward the top of the phone until it clicks into place.

Battery charging

Your phone is powered by a rechargeable NiMH or Li-Ion battery. Note that a new NiMH batterys full performance is achieved only after two or three complete charge and discharge cycles. For charging times, see Charging times on page 62.
How to charge your battery

Calling card set-up

If you wish to use a calling card for long distance calls, you must first save your calling card information into your phone. Your phone can save information about two calling cards. To learn how to make calling card calls, see Calling card calls on page 32. For more information on Prepaid services, see page 55.
Saving calling card information
1 Press Menu 3. 2 Scroll to the desired calling card, then press Options. 3 Scroll to Edit, then press OK. 4 Enter your security code (see page 56), then press OK. to choose 5 At Dialing sequence, press Select. Press the dialing sequence your card uses, then press Select. Note: The order of the following steps may vary, depending on which dialing sequence your card uses. 6 Enter access number (usually the 1-800 number listed on the back of the calling card), then press OK. 7 Enter your card number and/or PIN, then press OK. Your phone will display Save changes? Press OK. 17
to reach Card name, then press Select. Enter 8 Press the card name using your phones keypad, then press OK. Note: This procedure might not work with all calling cards. Please look at the back of your calling card or contact your long distance company for more information.
Choosing a calling card to use
To select a calling card to use, press Menu 3, scroll to the card you want, then press Options. Select is highlighted; press OK. Enter your security code, then press OK.
Your phone has an internal clock that can be displayed on the start screen. The clock must be set in order for call times to be recorded (see Call log on page 39). If you remove the battery for longer than a couple of seconds, the time will be lost. The next time you turn on the phone, you will be asked to enter the time. For more information on automatic time update of the clock in your phone, see page 19.

Selecting time format

Use Menu 3 to set the clocks format to 24-hour or am/pm.

Setting the time

Use Menu 2 to enter the current time. Use two digits for both hours and minutes (for example, enter 1:30 as 0130). If the clocks time format is set to am/pm, you will be asked to choose am or pm. Note: The key does not work on this screen. If you make a mistake, re-enter all four digits.

Use Menu 8, My tones, to change the six sound settings in your phone: ringing option, ringing tone, ringing volume, message alert tone, keypad tones, and warning and game tones. The quick alert settings feature (see page 22) allows you to select a fixed combination of these settings to suit your current environment.

Ringing option

Use Menu to tell your phone how to notify you that you have a call. Note: If you choose Beep once or Silent, the alarm clock will only sound a quiet beep. Ring The phone rings normally using the currently selected ringing tone. Ascending The phone rings using the currently selected ringing tone. The ringing volume starts low and increases with successive rings. Ring once The phone rings once using the currently selected ringing tone. 20
Beep once The phone beeps once. Silent The phone makes no sound when you receive a call. The icon appears at the start screen.

Ringing tone

Your phone plays a ringing tone when someone calls you and the ringing option is set to Ring, Ascending, or Ring once. Use Menu to choose one of 30 ringing tones. Scroll to a tone to hear how it sounds. Note: If the ringing option is set to Silent or Beep once, the phone will not play sample tones. For more information on downloading ringing tones, see page 53.

Ringing volume

Use Menu to control the volume of your phones ringing and of message alert tones. Note: If your phone does not ring loudly enough at maximum volume, try a different ringing tone; some tones are louder than others.

Message alert tone

Use Menu to choose the tone played when you receive a text message. Scroll to a tone to hear how it sounds.

Keypad tones

Use Menu to adjust the volume of the tones your phone makes when you press its keys.

Warning and game tones

Use Menu to turn your phones warning and game tones on or off. Warning tones are created by events such as confirmations, errors, power on, battery low, and recharge battery.

Vibrating alert

If your phone has a vibrating battery attached, use Menu to set your phone to vibrate when you receive a voice call. If you turn vibrating alert on, your phone will vibrate even if its ringing option is set to Silent. Note: The vibrating battery does not vibrate when your phone is connected to or placed in any charging device.

Quick alert settings

You can quickly adjust your phones sound settings when you go into a meeting, go outdoors, etc. To choose a quick alert setting, briefly press the key, scroll to the setting you want, then press OK. Tip: Instead of using the scroll keys, you can press the key repeatedly to scroll through this menu. After you reach the setting you want, press and hold the key. Note: If you choose Silent or Quiet, the alarm clock will only sound a quiet beep. My tones Uses the settings you have made in Menu 8, My tones. Silent All sound is turned off. Quiet Your phone beeps once when you receive a call or text message. Other tones are turned off. Loud Your phone rings loudly. Other tones are not affected. Headset Automatically selected when your phone is connected to a headset. Remembers any changes you make to settings in Menu 8, My tones, and uses them the next time you connect the phone to a headset. Car Automatically selected when your phone is connected to a car kit. Remembers any changes you make to settings in Menu 8, My tones, and uses them the next time you connect the phone to a car kit. Note: If the Silent, Quiet, or Loud quick alert setting is chosen and you change a setting in Menu 8, My tones, the phone switches the current quick alert setting to My tones. 22

Three-way calling

Note: This feature might not be supported in your network or might work differently than described. For more information, contact your service provider. To create a three-way call, call the first person. Then select New call from the in-call menu, enter or find the phone number of the second person, press OK and then press Call. The first person is put on hold. After the second person answers, choose Connect all from the in-call menu. Now all three of you can talk to each other at the same time. 27

Ending calls

Press End or select End from the in-call menu. Note: The wireless network does not support ending individual calls when more than one call is in progress.

Call waiting

Call waiting is a network service that allows you to receive an incoming call when you are already in a call. Contact your service provider for details. Answering a waiting call Note: Call waiting is a network service that requires a subscription from your service provider. If you are in a call with someone and another person calls you, the function of the Navi Key changes from End to Options. Press Options. The in-call menu appears with Answer selected. Press OK. Swapping between calls When you are in a call and you receive an indication of a waiting call, select Answer from the in-call menu. Your first call will be put on hold. To swap back to the first call, select Swap from the in-call menu. Cancelling call waiting: standard method To cancel call waiting before making a call, you must get the call waiting cancellation code from your service provider. 1 Dial the code for cancelling call waiting followed by the phone number you want to call. 2 Press Call. Example: If the code for cancelling call waiting is #43# and the number you want to call is (416) 555-1234, dial #43#4165551234, then press Call. Cancelling call waiting: menu method You can save the code for cancelling call waiting given by your service provider and then use Menu to cancel call waiting. See Adding feature cancellation codes to the menu on page 26. 28

Call forwarding

Call forwarding is a network service that lets you forward your incoming calls to another phone number. Check with your service provider for details and feature codes.
Activating call forwarding
Standard method To activate call forwarding, you must get the call forwarding activation code from your service provider. 1 Dial the code for activating call forwarding followed by the phone number to which you want to forward your calls. 2 Press Call. Example: If the call forwarding activation code is *21* and the number you want to forward calls to is (416) 555-1234, dial *21*4165551234, then press Call. Menu method You can save the code for activating call forwarding and then use the menu to activate call forwarding. See Adding feature activation codes to the menu on page 26.

Missed calls

If you subscribe to the caller ID network service, your phone automatically stores the last 10 numbers that have tried unsuccessfully to reach you (as long as the caller allowed his or her number to be shown to you).
When the display says Missed calls
Press List. If you have missed more than one call, you can scroll through the list of numbers. To dial the displayed number, press Options, then choose Call.
Viewing the missed calls list at any time
Use Menu to view the missed calls list at any time. To dial a number, press Options, then choose Call. 39

Received calls

If you subscribe to the caller ID network service, your phone automatically stores the phone numbers of the 10 most recent calls you have answered. Use Menu to view the received calls list. To dial a number, press Options, then choose Call.

Dialed calls

Your phone automatically stores the last 10 numbers you have dialed. From the start screen, press to access the dialed calls list. Scroll to the desired number, then press Call. Note: To perform any of the options listed on page 39, access the dialed calls list by pressing Menu 3 3.

Clearing call lists

Use Menu to clear the missed, received, and/or dialed call lists.

Call timers

Use Menu to see the amount of time you have spent in calls. Times are for the currently selected phone number; your phone has a separate timer for each phone number, or NAM (see page 31). Note: The actual time invoiced for calls by your service provider may vary, depending upon network features, rounding-off for billing, and so forth.

Viewing call timers

Use Menu to view the various call timers. Last call is the duration of the last call, or current call if applicable. All calls is the duration of all calls since the timers were last reset. Life timer displays the duration of all calls for the life of your phone and cannot be reset.

Setting timers back to 0

Use Menu 4 to clear call timers. You will be required to enter your security code.
Displaying the current call timer during calls
1 Press Menu 1. 2 Press Details. 3 Press Select. 4 Scroll to On, then press OK. During a call, the amount of time spent in that call will be displayed.

10. Voice messages

Voice mail is a network service that allows callers to record a message when you cannot be reached. You can then call your voice mailbox and retrieve your messages.
Saving your voice mailbox number
When you subscribe to voice mail, your service provider will give you a voice mailbox number. You should save this number so you can call your voice mailbox by pressing and holding the key. See Voice mailbox number on page 23.

Listening to new voice messages
When you receive a voice message, your phone may notify you by beeping, displaying the voice message indicator , and displaying New voice message. The phone may display the number of messages if there is more than one. Note: The method of notification depends on your service provider. When your phone notifies you that you have a new voice message, press Listen. Your phone dials your voice mailbox number, if you have saved it.
Calling your voice mailbox at any time
Once you have saved your voice mailbox number, you can press and hold the key to dial your voice mailbox.

11. Text messages

The text message network service allows you to write, send, forward and reply to text messages. Also, you can receive text messages from a variety of sources, such as a Web page set up by your service provider. Note: The availability of text messages may vary according to your wireless service provider. Contact your service provider for details.

Reading messages

When you receive a text message, the phone displays the indicator, either Message received or New emergency message (if an emergency message has been received), and makes a sound (depending on the message alert tone; see page 21). To read the message, press Read. This takes you to the Inbox, with the new message selected. Press Read again. If necessary, use the scroll keys to read the entire message. After reaching the end of the message, use the scroll keys to view the senders name or phone number, and the date and time the message was received.
Options when reading messages
Several options are available while you are reading a message. Just press Options, scroll to the one you want, then press OK. Read next allows you to read the next message. Erase deletes the message. Press OK to confirm the deletion (or to cancel). Save saves the message in the Saved folder. Call back calls any displayed phone number included in the message. If more than one number was included, a list of numbers is displayed. Choose one and press Call. Forward forwards the message to another person. That person must have the appropriate message service.

Reply provides a screen where you can write a reply to a message. When you have seen the last new message, the indicator disappears.

About the Inbox

The Inbox holds text messages that have not been deleted or saved. Use Menu 1 to access the Inbox at any time. You will see a list of message headers. The icon in front of the header indicates that a message has been read. The icon indicates that a message has not been read. Scroll to the desired message, then press Read.

About the Saved folder

The Saved folder holds up to 30 saved text messages. Use Menu 2 to access the Saved folder and read saved messages.
Storage of incoming messages
When you have an incoming text message and your phones memory is full, one or more low-priority messages, which have been read, will automatically be deleted in order to receive the new text message. Messages are usually deleted from your Inbox, but an emergency message may cause messages to be deleted from the Saved folder. If the message memory is still full, your phone will display No space: message waiting. You can clear this notification by pressing OK. You should delete one or more old messages to make room for the new message. The network will re-send the message at a later time.
Erasing all text messages
Use Menu 6 to access the Erase all option for Text messages. Erase all allows you to permanently erase all messages from one of the following categories: All read All saved Erases all read messages in the inbox Erases all messages stored in the Saved folder All in inbox Erases all messages in the inbox All in outbox Erases all messages in the outbox
Writing and sending text messages
You can write a text message using your keypad. Once you have written a message on your screen, you will have options for sending your message. Note: Check with your service provider for details about language and feature availability.

Writing a text message

1 Press Menu 3 and select Write message. 2 Write your text message by entering letters and numbers from your keypad. 3 The function of the Navi key will change to Options. Your Options menu is: Send Exit Settings Save send the message return to the Text messages menu choose a setting for your message store the text message to Saved
Clear screen clear all entered text from the screen

Sending a text message

1 Write a text message and press Options. 2 To send the message, highlight Send and press OK. 3 Enter the phone number (or press Search to locate the number in the phone book), then press Send.

Saving a viewed business card
1 After viewing the business card, press Save, then press OK. , scroll to
2 At the Name prompt, edit the name if you want to, then press OK. 3 At the Number prompt, edit the number if you want to, then press OK.
Deleting a viewed business card
After viewing the received business card, press. Business cards are saved in your phone book and you can delete them the same way you delete phone book entries.

12. E-mail messages

You can use your phone to send and receive e-mail messages. This means you no longer need to be at your computer to send or receive messages.

Saving e-mail addresses

You can add an e-mail address to a name you already have in your phone book. Or, you can add a name and address as a new entry.
Save an e-mail address for an existing name
1 Press Menu and Select. 2 Scroll to Edit and press Select. 3 Scroll to the name you want to add an e-mail address to and press Edit. 4 When prompted Name, press OK. 5 When prompted Number, press OK. 6 When prompted E-mail address, enter the e-mail address. To add special characters (@ and. ), press to get to the special character screen. Scroll to the character you need and press Use. 7 Press OK. For more information, see Editing names and numbers on page 38 and Special characters in names on page 12.

Add a new e-mail address

1 Press Menu and Select. 2 Scroll to Add new and press Select. 3 When prompted Name, enter the name for the e-mail address. Press OK. 4 When prompted Number, enter the phone number for the e-mail address or press OK to leave it blank. 49
5 When prompted E-mail address, enter the e-mail address. To add special characters (@ and. ), press to get to the special character screen. Scroll to the character you need and press Use. 6 Press Save. For more information on saving, editing and erasing phone book entries, see Phone book on page 36.

Sending e-mail messages

Before you can send and receive e-mail messages, you need to have the e-mail gateway number saved in your phone. Contact your service provider for more information. 1 Press Menu 4. Note: Please contact your service provider in the event your are prompted for the e-mail gateway number. 2 When prompted E-mail address, enter the e-mail address or press Search to scroll through the e-mail addresses in your phone book. Press OK to choose the e-mail address and press OK to confirm the address. 3 When prompted Subject, enter a subject for your e-mail message, or press OK to leave it blank. The screen you see now has the cursor is blinking after the e-mail address and the subject text. In the top right corner a number shows the characters you have left to use in your message. Note: The maximum number of characters for message length varies. Contact your service provider for details. 4 Write your message. 5 Press Options and scroll to Send. Press OK.

Options for a completed message
Send Save Erase Exit send the message save the message in the saved folder clear the message text erase the message and return to the Start screen
Forwarding and replying to e-mail messages
1 If the message is not on the screen, press Menu 1. 2 Scroll to the message you want to use and press Read. 3 Press Options, scroll to Forward or Reply, and press OK. 4 Scroll to As e-mail and press OK. 5 When prompted for the e-mail address, enter the address or press Search to scroll through the list of e-mail addresses in your phone book. Press OK to choose the address and press OK to confirm the address. 6 Enter a subject line and press OK. 7 When the message box appears, write your reply or the message to the forwarded e-mail. 8 Press Options, scroll to Send and press OK.

13. Extra features

Alarm clock
The alarm clock feature is based on your phones internal clock and sounds an alert at a time you specify.

Setting the alarm clock

Use Menu to turn the alarm clock on or off. Note that when you are entering the alarm time, use two digits for both hours and minutes (for example, enter 1:30 as 0130). If the clocks time format (see page 18) is set to am/pm, you will be asked to choose am or pm. Note: The key does not work on this screen. If you make a mistake, re-enter all four digits. For more information on clock, see page 18 and on automatic time update, see page 19.

Alarm volume

The alarm volume is determined by the current ringing volume. However, if you have manually set the ringing option (see page 20) to Silent or Beep once or have selected the Silent or Quiet quick alert setting (see page 22), the phone only sounds a quiet beep.

When the alarm sounds

To shut off the alarm, press any key except Snooze. If you press Snooze, the alarm sounds again in 10 minutes. To turn off the alarm before then, press Stop. If you let the alarm sound for one minute without pressing a key, it stops for 10 minutes, then starts again.
If you turn off the phone
If you turn off the phone and the alarm is set, the phone switches itself on at alarm time, then the alarm sounds.

Prepaid service

Your service provider may offer prepaid service. This means that you can sign up to become a prepaid customer and obtain airtime by purchasing a Prepaid card which contains a replenishment value. Contact your service provider for details. Note: Use of the Prepaid menu requires that your service provider have access numbers available to check your balance and replenish your account.

14. Security features

Access codes overview
Access codes consist of the lock code and security code. When you get your phone, you should change these codes from their defaults, write down the new codes, and keep them in a safe place away from the phone. Avoid using access codes that are similar to emergency numbers, such as 911, to prevent accidental dialing of the emergency number.

Lock code

Your phones lock code is used to lock and unlock your phone. The default lock code is 1234. Use Menu to change the lock code. When the phone requires the lock code, it displays Enter lock code: Enter the code, then press OK. If you enter a wrong lock code five times in succession, your phone prompts you for the security code.

Security code

The security code is required to restrict calls and to restore factory settings. The default security code is 12345. Use Menu to change the security code. When the phone requires the security code, it displays Security code: Enter the code, then press OK. If you enter an incorrect security code five times in succession, the phone will not accept any input for the next five minutes.

Restricting calls

Use Menu 1 to restrict outgoing or incoming calls. This is handy if you want to lend your phone to someone but do not want them to make long-distance or other expensive calls.
Restricting incoming calls
Choose Restrict incoming calls to prevent your phone from receiving incoming calls. Enter your security code, then press OK. Press Mark, then press. Press Yes to save this change (or to cancel). Note: This feature requires the caller ID network service, and the callers ID must be available to the phone in order for the restriction to work. Allowing incoming calls To allow incoming calls once again, choose Restrict incoming calls and enter your security code. Press Unmark, then press. Press Yes to save this change (or to cancel).
Restricting outgoing calls
You can create a list of numbers to which outgoing calls cannot be made. A call restriction can consist of an entire phone number, an area code, etc. When the restriction is selected, calls cannot be made to any number beginning with those digits. For example, entering 4165551234 will block calls to (416) 555-1234 only. 1 will block all calls starting with 1, including long distance calls and 1-800 calls. 1800 will block 1-800 calls only. Adding numbers to the restricted outgoing calls list To prevent your phone from making outgoing calls, choose Restrict outgoing calls. Enter your security code, then press OK. Continue with the steps illustrated below. 1 Add restriction is selected. Press OK.

When the phone is charging, no lights are displayed on the stand; check the charging status of the phone battery on the phone display. Charging moves to the rear slot once the front battery is 100% charged. When the spare battery is charging, check the status indicator on the left side of the charging stand. A red light indicates that the battery is charging; a green light indicates that the battery is charged to at least 80% of its capacity.
DCH-9 Rear Slot Charging Times Using ACP-7U Battery Front slot empty Front slot occupied Using ACP-9U Front slot empty Front slot occupied
BLS-2N Extended Li-Ion 900 mAh BMS-2S Extended NiMH 900 mAh BMS-2V Vibrating NiMH 900 mAh BLS-4 Ultra Extended Li-Ion 1500 mAh 12 hours 15 hours, 45 minutes 8 hours 10 hours, 30 minutes 6 hours, 30 minutes 8 hours, 4 hours, 5 hours, 30 minutes 30 minutes 30 minutes
The phone has the built-in intelligence to maintain the battery, so there is no need for a discharge feature on the stand.
16. Reference information
Important safety information

Traffic safety

Do not use a hand-held telephone while driving a vehicle. If using a hand-held phone park the vehicle before conversing. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop. The use of an alert device to operate a vehicles lights or horn on public roads is not permitted. Remember, road safety always comes first!

Operating environment

Remember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its users guide for detailed safety instructions. Do not connect incompatible products. As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder).

Electronic devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 6 inches (20 cm.) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers: Should always keep the phone more than 6 inches (20 cm) from their pacemaker when the phone is switched on; Should not carry the phone in a breast pocket;

Should use the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, switch off your phone immediately.

Hearing aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider.

Other medical devices

Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (e.g. electronic fuel injection systems, electronic anti-skid (anti-lock) braking systems, electronic speed control systems, air bag systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

Posted facilities

Switch your phone off in any facility where posted notices so require.
Potentially explosive atmospheres
Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised to switch off the phone while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats; chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.
Only qualified personnel should service the phone, or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit. Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories. For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network and may be illegal. Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.

Emergency calls

IMPORTANT!
This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user- programmed functions which cannot guarantee connection in all conditions. Therefore, you should never rely solely upon any wireless phone for essential communications (e.g. medical emergencies). Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.

Making an emergency call

1 If the phone is not on, switch it on. key for several seconds to 2 Press and hold the ready the phone for calls. 3 Key in the emergency number for your present location (e.g. 911 or other official emergency number). Emergency numbers vary by location. 4 Press Call. 69
If certain features are in use (Keyguard, call restrictions, etc.), you may first need to turn those features off before you can make an emergency call. Consult this document and your local wireless service provider. When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your wireless phone may be the only means of communication at the scene of an accident - do not cut off the call until given permission to do so.
Radio frequency (RF) signals
Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August, 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with safety standards previously set by both U.S. and international standards bodies: ANSI C95.1 (1992)*, NCRP Report 86 (1986)*, ICNIRP (1996)*. Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies and industry reviewed the available body of research to develop the ANSI Standard (C95.1). The design of your phone complies with the FCC guidelines (and those standards). *American National Standards Institute, National Council on Radiation Protection and Measurements; International Commission on NonIonizing Radiation Protection.