Reviews & Opinions
Independent and trusted. Read before buy Humminbird Platinum ID 120!

Humminbird Platinum ID 120

Manual

Download (English)
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Humminbird Platinum ID 120About Humminbird Platinum ID 120
Here you can find all about Humminbird Platinum ID 120 like transducer and other informations. For example: .

Humminbird Platinum ID 120 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Humminbird Platinum ID 120 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Humminbird Platinum ID 120 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 6. Page 1 of 1. Average Rating:
sulan 6:23am on Monday, October 25th, 2010 
I was a bit skeptical about getting this game, but after research i decided to buy. i should have waited for this thing to be on sale..when i saw it on sale, it was so much cheaper.. free shipping the price The graphics are downright amazing. There are rarely any moments of screen tearing or texture pop-in.
mangar 12:32am on Thursday, September 16th, 2010 
This game is far from anything special, and h...  Good graphics You can only carry one weapon
erdsiger 9:36am on Wednesday, September 1st, 2010 
This is probably one of the better FPS i have played in a while. I loved it but like any other good game there are its goods and bads.
cleantech 12:45pm on Monday, July 26th, 2010 
"Great graphics and great gameplay! Very addicticting game... Cannot wait for Killzone 3!!! Great graphics and great gameplay "This game is pretty fun, but has some annoying parts. Sniping is a pain.
Mtwo 8:49am on Sunday, May 30th, 2010 
NICE but short The Game is nice but too Short .... and also needs variety in ememies and weapons no multiplayer mode only online no split screen Bring the fight to the Helghast! Killzone 2 had over two years of hype to live up to.
TTluver 1:53pm on Tuesday, April 6th, 2010 
I only have few words to describe this game, Awesome GFX, Sound and you will find yourself in-action most of the time. One Game you Should buy this year is KillZone 2. Online Play is worth the purchase No Online Co-op

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

TABLE OF CONTENTS

INSTALLATION PREPARATION. Parts Supplied. Accessories. Installation Overview. Alternative Transducers and Mounting Methods. Transducer Exchange INSTALLATION. Transom Installation. Inside the Hull Installation. Control Head Installation. Test the Installation 15
THANK YOU. 16 USING THE PLATINUM ID 120. How the Platinum ID Works. Features. Operating Instructions 19 21
SPECIFICATIONS 28 MAINTENANCE AND WARRANTY. Maintenance. Troubleshooting. Warranty. Service Policy Customer Support. 34 35

INSTALLATION PREPARATION

PARTS SUPPLIED PARTS SUPPLIED Before installing your new Humminbird fishsinder, please ensure the following parts are included in the box: Fishfinder Transducer with 20 (6m) of cable and mounting hardware kit Mounting system and mounting hardware kit 6 (2m) power cable Publications kit
It any of these items is missing, call our Customer Support Hotline. ACCESSORIES Humminbird offers a wide assortment of accessories that complement and expand the capability of your new fishfinder. These accessories are designed with the same high standards and are backed by the same one-year warranty. The Humminbird Accessory catalog included with your unit contains descriptions of the many accessories available and ordering information. All Humminbird accessories are available through your fullservice Humminbird dealer or factory direct through our number listed in the Customer Support section. INSTALLATION OVERVIEW Your Humminbird fishfinder consists of two primary components to install: the control head and the transducer. The control head contains the sonar transmit and receive circuitry, as well as the user controls and display. It should be installed in a location that provides access to the controls and visibility while in use. The control head mounts on a quick disconnect mounting system that swivels and tilts providing flexibility for viewing from almost anywhere on the boat. The transducer converts electrical energy from the transmitter into mechanical pulses or sound waves. The transducer also receives the reflected sound waves and converts them back into electrical signals for display on the control head. It should be installed in contact with the surface of the water in an area that has smooth waterflow- usually on the transom of the boat. There are several mounting options for the transducer. Review the following section to determine the method that works for you and your boat.
INSTALLATION OVERVIEW Determining How to Mount the Transducer Your Humminbird fishfinder includes a standard transducer. This transducer can be mounted on the transom of the boat or bonded to the inside of a fiberglass hull boat. The transom installation, which is the most widely used, places the transducer on the outside of the boat hull. This technique produces the least signal loss, and provides a way to adjust the transducer after installation. The mounting hardware included is designed to protect both the boat and the transducer should the boat strike debris in the water or when trailering. As an alternative to transom mounting, it is possible on many fiberglass-hulled boats to glue the transducer on the inside of the boat hull. Since fiberglass has similar sonar characteristics as water, the sonar signal can pass through the boat hull with minimal loss. The hull of the boat must be single layer construction (not double-hulled) Also, any air trapped in the lamination of the fiberglass would prevent the sonar signal from passing through. Inside the hull installations require no holes be drilled into the boat and through experimentation, high-speed operation comparable to transom mounting can be achieved. Two-part slow cure epoxy (not included) is required to glue the transducer in place.
ALTERNATE MOUNTING METHODS ALTERNATE TRANSDUCERS AND MOUNTING METHODS Your Humminbird fishfinder comes with everything necessary for installation and operation on most boats. However, there are several situations which may require a different type of transducer. Inboard boats, wood or metal hulls, and sail boats create unique transducer mounting needs Alternate transducers and mounting methods are detailed below. Portable Mounting The standard transducer can be adapted for portable installations with a portable mounting kit available from Humminbird. This accessory adapts your transducer to a suction cup mount for temporary installation on the boat hull or other surface. Trolling Motor Mounting The standard transducer can also be adapted to mount on most trolling motors using a different accessory kit. This accessory includes a bracket and hose clamp that allows mounting the transducer to the body of most trolling motors. Thru-Hull Mounting Thru-hull transducers install through a hole drilled in the hull of the boat. Larger boats or boats with inboard motors create turbulence that make transom mounting ineffective. Also, hulls that are very thick or are double layered, or made from materials such as wood or metal, (which do not conduct sonar signals) make inside the hull mounting inadvisable. Thru-hull mounting may require the use of a fairing block to level the transducer with the waterline. Also, since special tools and knowledge may be required to perform this type of installation, it is best to refer to a qualified marine technician.

TRANSDUCER EXCHANGE TRANSDUCER EXCHANGE Other transducers are available as replacements for the standard transducer. You may exchange your new and unassembled transducer for another type by returning it to the address listed in Customer Support. Some transducers may have additional cost. Refer to the Accessory catalog or call Customer Support for information. BEGINNING INSTALLATION Now that you have determined the transducer mounting method you can begin installation of your new Humminbird fishfinder. The installation guide included on the next few pages provides detailed step by step instructions for installation of the control head and transducer. For transom mount transducer installations you will need the mounting template included with your manual. In addition to the parts included you need the following for installation and operation: A powered hand drill and various drill bits Philips and flat-head screwdrivers A ruler or measuring tape Pen or pencil 12 volt power source (your boats battery) A 1-amp fuse A fuse holder (if you are wiring directly to the boats battery) Silicone sealant (for sealing drilled holes) 2-part, slow-cure epoxy (for inside the hull transducer installations)

INSTALLATION

TRANSOM INSTALLATION Do not begin this transducer installation until you read the Installation Preparation in the Operation Guide. This chapter contains information critical to the correct installation of your transducer. Due to the wide variety of boat hulls, only general instructions are presented in the installation guide. Each boat hull represents a unique set of requirements that should be evaluated prior to installation. TRANSOM INSTALLATION Step One - Determine Where to Mount the Transducer Begin the transducer installation by determining where on the transom to install the transducer. Consider the following to find the best location: It is very important to locate the transducer in an area which is relatively free of turbulent water, As a boat moves through the water, turbulence is generated by the weight of the boat, and the thrust of the propeller(s). This turbulent water is normally confined to areas immediately aft of ribs, strakes or rows of rivets on the bottom of the boat, and in the immediate area of the propeller(s) (Figure 1). On outboard or inboard/outboard boats it is best to stay at least 15 (40cm) to the side of the propeller(s). If possible, viewing the transom of the boat while the boat is moving will provide the best means of locating turbulence free water. If maximum high-speed operation is a high priority, this is the recommended method. If this is not possible, select a location on the transom where the hull forward of this location is smooth, flat, and free of protrusions or ribs. The transducer when mounted should point straight down. The design of the transducer will accommodate a wide range of deadrises and remain ported straight down (Figure 2). On boats with stepped hulls, it may be possible to mount the transducer on the step. Never mount the transducer on the transom behind a step, as this area of the transom will not be in contact with the water at high speed (Figure 3).

TRANSOM INSTALLATION If the propeller(s) is (are) forward of the transom, it may be impossible to find an area clear from turbulence, and a different mounting technique or transducer type should be considered.
Step Two - Drill the Mounting Holes 1. Remove the mounting template from the front of the Operations Manual. 2. Hold the template on the transom of the boat in the location where the transducer will be installed (Figure 4). Align the template vertically, ensuring the lower edge of the transom meets with the bottom corner of the template. 3. Using a pencil or punch, mark the two mounting holes shown on the template onto the transom. Do not mark or drill any other holes at this time. 4. Using a 5/32 (4mm) bit drill the two holes to a depth of approximately 1" (3cm). On fiberglass hulls, it is best to start with a smaller bit and use progressively larger drill bits to reduce the chance of chipping or flaking the outer coating. Step Three - Assemble the Transducer 1. Attach the Pivot to the transducer body as shown in Figure 5, using the #8 3/8 (9mm) long allen headed pivot screw, the headed pin, the two flat washers, and the two toothed lock washers. Note: The toothed lock washers must be positioned between the transducer and the pivot ears. The flat washers must be positioned to the outside at the pivot ears. 2. Using the AIlen wrenches provided, loosely tighten the pivot screw (Figure 6). Do not completely tighten the assembly at this time, so the pivot angle can be adjusted later. 3. Insert the pivot/transducer assembly into the mounting bracket as shown in Figure 7. Do not snap the assembly closed.
TRANSOM INSTALLATION Step Four - Mount the Transducer to the Transom 1. Apply silicone sealant to the mounting holes drilled into the transom. 2. Align the transducer assembly with the drilled holes in the transom (Figure 8). 3. Use either a flat head screwdriver, a 5/16" (8mm) hex driver, or a 5/16" (8mm) socket to mount the assembly. Using the two #(25mm) long slotted hex head screws, mount the transducer assembly to the transom as shown. Do not fully tighten the mounting screws in order to vertically adjust the transducer. Snap the pivot down into place. Step Five - Adjust the Running Position of the Transducer The bracket allows height and tilt adjustment, the pivot screws allow angular adjustment. Initially, adjust the transducer as described in the following paragraphs. Further adjustment may be necessary to refine the instillation after high speed testing. 1. First adjust the pivot angle of the transducer body so its length is parallel with the length of hull of the boat. Then pivot the transducer down so the rear is about 1/4 inch (6mm) lower than the front (Figure 9). 2. Fully tighten the two pivot screws using the Allen wrenches. It may be necessary to retighten the pivot screws after the initial use as the plastics may still be seating to the lock washers. 3. Adjust the height of the assembly so the face of the transducer is 3/16" (4.5mm) beneath the lower edge of the transom (Figure 10). Mark the position of the mounting bracket on the transom with a pencil. 4. Force the pivot to the up position to gain access to the mounting screws. Assure the transducer location has not changed, then fully tighten the two mounting screws (Figure 11). Snap the pivot back down. Confirm the pivot angle has not changed. Note: A third screw location is provided for the mounting bracket. Drill this hole and install the screw after final testing and adjustments have been completed.

INSIDE THE HULL INSTALLATION 3. Power up the Control Head. 4. Run the boat at various speeds and water depths while observing the screen on the Control Head. If the unit functions well at low speeds but begins to skip or miss the bottom at higher speeds, the transducer needs to be moved. If depth performance is required, test the fishfinder in water at the desired depth. Test different locations in the hull until the optimum performance is achieved. Step Three - Permanently Mount the Transducer 1. Once the mounting location is determined, mark the position of the transducer. 2. Remove the water from inside the hull and thoroughly dry the mounting surface. If the surface is excessively rough, it may be necessary to sand the area to provide a smooth mounting surface. Ensure the mounting area is clear and dry. 3. Mix an ample quantity of two-part slow-cure epoxy slowly and thoroughly. Avoid trapping air bubbles. 4. Coat the face of the transducer and the inside of the hull (Figure 16). 5. Press the transducer into place with a slight twisting motion to purge any trapped air from underneath, keeping the pointed end of the transducer body pointed forward (Figure 17). Note: Proper operation requires the pointed end of the transducer body to face towards the bow. 6. Weight the transducer so it does not move while the epoxy is curing. When the epoxy cures, no water is necessary inside the hull. Neither water, spilled gasoline, or oil will affect the performance of the transducer.
CONTROL HEAD INSTALLATION CONTROL HEAD INSTALLATION Step One - Determine Where to Mount Begin the installation by determining where to mount the control head. Consider the following to determine best location: The cables for power, transducer and temp/speed accessories (if applicable) should be installed first and must reach the mounting location. Extension cables are available. There are two ways to route the cables to the unit: through a hole in the mounting surface underneath the mounting bracket or from a hole outside the mounting bracket. Routing the cables down under the mount provides maximum weather protection; however this is not always feasible if the area under the fishfinder is inaccessible. In this case, route the cables through a hole at another location and cover with the supplied hole cover. The mounting surface should be adequately supported to protect the fishfinder from excessive wave shock and vibration, and provide visibility while in operation. The mounting area should allow sufficient room for the unit to pivot and swivel freely, and for easy removal and installation (Figures 18-19).

Step Two - Connect the Power Cable to the Boat A 6 (2m) long power cable is included to supply power to the fishfinder. You may shorten or lengthen the cable using 18 gauge multi-stranded copper wire. CAUTION: Some boats have 24 or 36 volt electric systems. Be sure your unit is connected to a 12 VDC power supply. The Power can be connected to the boat's electrical system at two places: a fuse panel, usually located near the console, or directly to the battery. If a fuse terminal is available, use crimp-on type electrical connectors (not included) that match the terminal on the fuse panel. Attach the black wire to ground, and the red wire to 12 VDC power (Figure 20). Be sure to use a one amp fuse in the connection. If you must wire the control head directly to a battery, be sure to install an inline fuse holder
CONTROL HEAD INSTALLATION and one amp fuse (not included) for the protection of the unit (Figure 21). Humminbird is not responsible for over voltage or over current failures. In order to minimize the potential for interference with other marine electronics a separate power source (such as a second battery) may be necessary. Step Three - Drill the Mounting Holes 1. Set the mounting bracket in place on the mounting surface. Mark the four mounting screw locations with a pencil or punch. 2. Set the mounting bracket aside, and drill the four mounting screw holes using a 9/64 (3.6mm) bit. Step Four - Run the Cables 1. If the cables must pass through a hole underneath the mounting surface, mark and drill a 1 (25mm) hole centered between the four mounting holes (Figure 22). Note: if the cables must pass through the mounting surface at a different location, drill the 1" (25mm) hole at that location and pass the cables through from underneath. Also, you must break out the tabs on the rear of the mounting base using needle nose pliers (Figures 24-25). 2. Insert all cables through the 1 (25mm) hole from beneath the mounting surface. 3. Pass the cables through the grommet (if the cable hole is underneath the mounting bracket) then press the grommet in place around the cables and into the 1 (25mm) hole. 4. Pass the cables through the mounting base, out the top of the mounting bracket. 5. Place the mounting bracket on the mounting surface aligned with the drilled holes. Insert the four flathead wood screws into the mounting holes and tighten fully (Figure 23). Optional: If the cables pass outside the mounting bracket, install the hole cover over the hole and fasten in place using the two #8 x 7/8 (22mm) wood screws (Figure 24).

PLATINUM ID FEATURES POWER: Press the button once to turn the Platinum ID on, then press again to turn the unit off. When the unit is off, keeping POWER pressed for about two seconds starts the builtin simulator. STOP: Freezes the action on screen so that it can be studied more closely or to allow more time to adjust menu functions. LIGHT: Activates the backlight for nighttime use. SELECT: Allows the user to select between menu functions that are displayed on the screen. UP-DOWN: Is used for adjustment of the menu functions. ON-OFF: Turns the menu functions on and off.
The latch is used to remove the Platinum ID from the swivel mount. To use simply press the bar and lift the unit from the mount. The Connector System cover is used to facilitate mounting of the Platinum ID unit. With the connector in place, all of the cables are held securely in place so that the unit can be easily removed and mounted. The All-in-One Mounting System for the Platinum ID allows for complete control of unit placement. The base swivels a full 360 degrees so that the unit is always at the optimal viewing angle. Also, the bracket has a ratchet mechanism that allows the unit to be tilted backward and forward to achieve the best viewing angle for different heights.
OPERATING INSTRUCTIONS OPERATING THE PLATINUM ID This section provides complete information on operating the Platinum ID through its front panel controls. You are encouraged to read this information completely as you first learn to use the Platinum ID; doing so will ensure you make the most of its many features and functions. The first part of this section explains the use of the built-in simulator, which you can use to practice selecting instructions through the front panel. The remaining instructions, which can be followed while using the simulator or in actual operation, explain each function and are organized according to the front panel layout. The Platinum ID includes a built-in simulator that helps you learn to use your new equipment. The simulator displays a typical underwater scene, and lets you practice with the controls. USING THE BUILT-IN SIMULATOR The unit must be powered off before you start the simulator. To activate it, press down and hold the POWER button until a chirping sound begins. Release the button, and the built-in simulator begins displaying a typical Platinum ID reading. You can use the simulator to learn the functions explained in the following pages, just as if you were getting actual on-the-water readings (but note that Sensitivity is disabled). To turn off the simulator, turn off the unit by pressing the POWER button again. Of course, the best way to learn to use the platinum ID is with actual use, especially in familiar waters. If you know whats below and see it on-screen, youll quickly become a Platinum ID expert.
OPERATING INSTRUCTIONS PLATINUM ID FUNCTIONS The Platinum ID offers several functions that you can adjust with the front panel buttons. (Note that to select something with a button, you must press it fully so that you can hear a chirp sound.) You can get acquainted with these features by actual operation, or when using the simulator. POWER: Press the button once to turn the unit on, then press the button again to turn the unit off. When the unit is off, keeping POWER pressed for about two seconds starts the built-in simulator. STOP: Press this button to freeze the display so you can study it. Press it again to restart the display movement. SELECT: This button is used to access the following functions for further adjustment: ID Units Sensitivity Bottom Alarm Fish Alarm Zoom Range Bottom Lock Display Speed Depth Range Trip Log To adjust any of these, press SELECT until the function you want appears. Each functions display tells you how to use the arrow buttons and ON-OFF for adjustment; when first using, you should also refer to the following instructions.

OPERATING INSTRUCTIONS 5. Enabling Fish Alarm Factory Setting: OFF The Fish Alarm alerts you with a chirping sound whenever the Platinum ID detects fish (or another object not attached to the bottom). To activate it, select FISH ALARM and press the ON-OFF button. Initially, the fish alarm will sound when any target not attached to the bottom is detected. The word ALL is displayed on the menu and two fish are shown at the lower part of the display. By pressing either arrow button, the word LARGE appears and the alarm will sound only when a large target is detected. A single fish symbol is shown on the bottom of the display to represent that large fish only is selected. While there is some variation in sonar characteristics of different species, typically, the strength of the return is relative to the size of the fish. 6. Using Zoom Range Factory Setting: OFF Zoom Range provides an up-close view. To activate it, select ZOOM RANGE and press ON-OFF. The Zoom view begins initially at the surface; press the Up or Down arrow to adjust Zoom depth. The range of the display is shown when Zoom is on. The Zoom range depends on the current Depth Range: 7 in the 15 and 30 Depth Ranges; 15 in the 60 and 120 Depth Ranges. You can adjust zoom depth before activating zoom, in which case the zoom range will be shown with horizontal dotted lines.
OPERATING INSTRUCTIONS 7. Using Bottom-Lock Factory Setting: OFF Bottom-Lock provides an up-close view like Zoom Range, except that in this case the zoomed view automatically moves up or down to stay on the bottom. To use this feature, select BOTTOM LOCK and press ON-OFF. The range of the display is shown when BottomLock is on. This is an ideal feature for finding structure or locating fish near the bottom. Remember: If Bottom-Lock is the last function you selected, you can use the ON-OFF button to switch Bottom-Lock on and off without having to press SELECT first.
8. Display Speed Factory Setting: One level below maximum The Platinum ID is updated (advances across the screen) as you move through the water. The speed at which the display is updated depends on the Display Speed setting. To adjust it, select DISPLAY SPEED, and press the Up arrow button for a faster setting or the Down arrow button for a slower setting. In general, higher Display Speed settings provide faster updates, while slower Display Speeds provide more detailed information.

OPERATING INSTRUCTIONS 9. Setting Depth Range Factory Setting: ON (Automatic) When you turn the Platinum ID on, it finds the bottom, sets the ideal Depth Range, and automatically adjusts the Depth Range (to as much as 120) as the depth changes. In this Auto Depth Range mode, the bottom is blacked-in for easy-tounderstand readings. If you prefer, you can turn Auto Depth Range off. Select DEPTH RANGE, press ON-OFF, and adjust the Depth Range with the Up or Down arrow button. In this Manual Depth Range mode, the bottom is not blacked in. This lets you see a second return, which is preferred by some fishermen because the width of the second echo can indicate bottom hardness.
10. Trip Log Factory Setting: OFF The Platinum ID Trip Log provides a full screen of information on current conditions. To display it, select TRIP LOG and press ON-OFF. All log information is continuously updated as long as the platinum ID remains powered on. If you want to reset Average Speed, elapsed tome, and Elapsed Distance, press the STOP button. Pressing ON-OFF exits the Trip Log and returns you to normal Platinum ID operation. NOTE: Trip Log requires proper input from the speed accessory on the transom of the boat.

SPECIFICATIONS

Operating Frequency Power Requirement Power Cable Length Sensor (standard) Sensor Cone Angle Depth Range Unit Construction Unit Dimensions Display Viewing Area Matrix Configuration 455KHz 10-16 volts DC 48 SHS6-degrees 0-15, 0-30, 0-60, 0-120 High-impact polycarbonate housing 6 W x 6 H x 1 D Super-twist LCD 3.1 x 4.x 125

MAINTENANCE AND WARRANTY

MAINTENANCE MAINTENANCE Your Humminbird fishfinder is designed to provide years of trouble free operation with virtually no maintenance. Follow these simple procedures to ensure your Humminbird continues to deliver top performance. If the unit comes into contact with salt spray simply wipe the affected surfaces with a cloth dampened in fresh water. Do not use a chemical glass cleaner on the lens. Chemicals in the solution may cause cracking in the lens of the unit. When cleaning the LCD protective lens, use a chamois and non-abrasive, mild cleaner. Do not wipe while dirt or grease is on the lens. Be careful to avoid scratching the lens. If your boat remains in the water for long periods of time, algae and other marine growth can reduce the effectiveness of the transducer. Periodically clean the face of the transducer with liquid detergent. Pivoting the transducer up in the bracket may allow better access for inspection or cleaning. If your boat remains out of the water for a long period of time, it may take some time to wet the transducer when returned to the water. Small air bubbles can climb to the surface of the transducer and interfere with proper operation. These bubbles dissipate with time, or you can wipe the face of the transducer with your fingers after the transducer is in the water. Never leave the fishfinder in a closed car or trunk - the extremely high temperatures generated in hot weather can damage the electronics.

TROUBLESHOOTING TROUBLESHOOTING Do not attempt to repair the fishfinder yourself. There are no user serviceable parts inside, and special tools and techniques are required for reassembly to ensure the waterproof integrity of the housing. Repairs should be performed only by authorized Humminbird technicians. Many requests for repair received by Humminbird involve units that do not actually reed repair. These units are returned no problem found. If you have a problem with your Humminbird, use the following troubleshooting guide before calling Customer Support or sending your unit in for repair. Your Humminbird fishfinder contains several tools that can aid in determining if there is a problem and how to isolate and repair the problem in many cases. 1. Nothing happens when I turn the unit on. Check the power cable connection at both ends. Be sure the cable is connected correctly to a reliable power source - red lead to positive, black lead to negative or ground. Ensure the power available at the mount is between 10 and 20 VDC. If the unit is wired through a fuse panel, ensure the panel is powered. Often accessory fuse panels are controlled by a separate switch or the ignition switch. Also, often a fuse can appear to be good when in fact it is not. Check the fuse with a tester or replace it with a fuse known to be good. Check the power connection to the unit. It is possible to force the power cable connector into the cable holder incorrectly. If the connector is reversed, the unit will not work. Examine the contacts on the back of the unit to ensure there is no corrosion. Finally, ensure the unit is firmly seated on the mount. The electrical contacts are not made until the unit is fully seated. Ensure the metal cable retainer is properly installed in the mount. If not, the power connected may push out when the unit is put on the mount. 2. There is no transducer detected. Most Humminbird fishfinders have the ability to detect and identify that a transducer is connected. If at power up, a message indicates "transducer not connected, only simulator operation is possible. First, ensure that an appropriate transducer connector is positioned correctly in the connector holder, and that the unit is fully seated on the mount. Your Humminbird fishfinder will work only with an appropriate transducer; check the accessory guide for compatibility.

TROUBLESHOOTING Second, inspect the transducer cable from end to end for breaks, kinks, or cuts in the outer casing of the cable. Also ensure the transducer is fully submerged in water. If the transducer is connected to the unit through a switch, temporarily connect it directly to the unit and try again. If none of these items identifies an obvious problem, the transducer itself is probably the problem. Be sure to include the transducer if returning the unit for repair. 3. There is no bottom reading visible on the display. There are a number of possible causes for this condition. If the loss of bottom information occurs only at high boat speeds, the transducer needs adjusting. If the digital depth readout is working but there is no bottom visible on-screen, it is possible the depth range has been adjusted manually to a range lower than what is needed to display the bottom. Also, in very deep water, it may be necessary to manually increase the sensitivity setting to maintain a graphic depiction of the bottom. If you are using a transducer switch to connect two transducers to the unit, ensure the switch is in the correct position to connect a transducer that is in water. (If a trolling motor transducer is selected and the trolling motor is out of water, no sonar information appears.) It none of the above solve the problem, inspect the transducer cable from end to end for breaks, kinks, or cuts in the outer casing of the cable. If the transducer is connected to the unit through a switch, temporarily connect it directly to the unit and try again. If none of these items identifies an obvious problem, the transducer itself may be the problem. Be sure to include the transducer if returning the unit for repair. 4. When in very shallow water, I get gaps in the bottom reading and inconsistent digital depth indication. Your Humminbird fishfinder will work reliably in water 2 (.6m) or deeper. The depth is measured from the transducer, not necessarily from the surface.
TROUBLESHOOTING 5. The unit comes on before I press POWER, and won't turn off. Check the transducer cable. If the outer jacket of the cable has been cut and the cable is in contact with bare metal, you need to repair the cut with electrical tape. If there is no problem with the cable, disconnect the transducer from the unit and see if the problem is corrected, to confirm the source of the problem. 6. I get gaps in the reading at high speeds. Your transducer needs adjusting. If the transducer is transom-mounted, there are two adjustments available to you - height and running angle. Make small adjustments and run the boat at high speeds to determine the effect. It may take several tries to optimize high speed operation. This can also be a result of air or turbulence in the transducer location caused by rivets, ribs, etc. 7. My unit loses power at high speeds. Most Humminbird fishfinders have over-voltage protection that turns the unit off when input voltage exceeds 20 VDC. Some outboard motors do not effectively regulate the power output of the engine's alternator and can produce voltage in excess of 20 volts when running at high RPMs. Your fishfinder displays input voltage in the Diagnostic screen. Use this readout to determine if the voltage exceeds 20 VDC. 8. The screen begins to fadeout. Images are not as sharp as normal. Check the input voltage using Diagnostic. The fishfinder will not operate on input voltages below 10 VDC. 9. The display shows many black dots at high speeds and high sensitivity settings. You are seeing noise or interference caused by one of several sources. Noise can be caused by other electronic devices. Turn off any nearby electronics and see if the problem goes away. Noise can also be caused by the engine. If engine noise is causing the interference, the problem will intensify at higher RPMs. Increase the engine speed with the boat stationary to isolate this cause. Propeller cavitation can appear as noise on-screen. If the transducer is mounted too close to the propeller, the turbulence generated can interfere with the sonar signal. Ensure that the transducer is mounted at least 15" (38cm) from the prop.

WARRANTY HUMMINBIRD ONE YEAR FULL WARRANTY First year repairs (from original date of purchase) on your Humminbird fishfinder are absolutely free. This does not include physical damage to the unit or its accessory items. Any modification or attempt to repair the original equipment or accessories by unauthorized individuals will void the warranty. Return the warranty registration card and retain your bill of sale for warranty verification. Accessories not manufactured under the Humminbird trade name are not covered by our warranty. The customer is responsible for shipping charges to Humminbird. Humminbird will provide ground UPS or Parcel Post shipping back to the customer free of charge. This warranty applies to the original purchaser only. This warranty is in lieu of all other warranties expressed or implied and no representatives or persons are authorized to provide for any other liability in connection with the sale of our products. Humminbird reserves the right to perform modifications or improvement on its products without incurring the obligation to install the changes on units previously manufactured, sold, delivered, or serviced. THIS IS A FULL WARRANTY AS DEFINED BY THE FEDERAL WARRANTY ACT EFFECTIVE JULY 4 1975.
SERVICE POLICY SERVICE POLICY This Service Policy is valid in the United States only. This applies to Humminbird units returned to our factory in Eufaula, Alabama, and is subject to change without notice. All repair work is performed by factory-trained technicians to meet exacting factory specifications. Factory serviced units go through the same rigorous testing and quality control inspection as new production units. Even though you'll probably never need to take advantage of our incredible service guarantee, its good to know that we back our unit this well. We do it because you deserve the best. We will make every effort to repair your unit within three working days from the receipt of your unit. This does not include shipping time to and from our factory. Units received on Friday are usually shipped by Wednesday, units received Monday are usually shipped by Thursday, etc. We reserve the right to deem any product unserviceable when replacement parts are no longer reasonably available or impossible to obtain. After the original warranty period, a standard flat rate service charge will be assessed for each repair (physical damage and missing parts are not included). Please call our Customer Support Department to verify the service charge for your unit. The standard service charge includes UPS or Parcel Post freight only. If charges are not prepaid, the unit will be returned COD. If you are experiencing problems related to bottom or depth readings please send your transducer along with your unit when sending for repair.

CUSTOMER SUPPORT CUSTOMER SUPPORT If you have any questions, call our Humminbird Customer Support Hotline: 1-334-687-0503 Throughout the U.S. and Canada, hours are Monday-Friday, 8:00 a.m. to 5:00 p.m. Central time. If after reading Troubleshooting you determine your unit needs factory service, please attach a description of the problem and send it with the unit to the address below. If you are including a check please attach it to the unit. Humminbird Service Department Three Humminbird Lane Eufaula, AL 36027 USA

doc1

HUMMINBIRD PLATINUM ID PORTABLE OPERATIONS MANUAL
The Portable Case Please read these important tips and keep them for future reference. Your Platinum ID Portable Case is molded of a high-impact material that will provide years of operation and still maintain its good appearance. To clean the case, use a mild soap, liquid detergent, or household cleaners (such as Fantastic or Formula 409). Do not use an abrasive cleaner (such as Comet) or chemical cleaners (such as paint thinner or Acetone) as these will damage the finish. As with any electronic instrument, never leave your Platinum ID Portable on the dash or rear deck area of a car or truck. Periodically check the brass terminal strips located in both battery compartments of the lower case. Deposits or oxidation can cause a faulty power connection and interfere with the performance of your unit. Gently wiping the strips occasionally with fine steel wool will ensure good connection. Never attempt to remove the strips from the case, as doing so will damage them.
Case Setup The only tool needed to complete the installation of the Platinum ID Portable is a phillips head screwdriver. Your new Platinum ID Portable case incorporates the Humminbird All-in-One Mounting and Connector system, where all cable connections are a part of the mounting bracket. Follow these simple steps to attach the cables to the bracket: Open the portable case cover to its highest position and gently pull the cover toward the front of the unit to release it from the lower case. Grasp the top rear of the mounting bracket and pull toward you, to its full vertical position.
Locate the connector hardware kit (the smaller of the two hardware bags). The illustration on the hardware bag shows the proper orientation of the various cables into the connector. The power cable (identified by a 1 on the plug) is prewired to the battery compartments of the portable case. Insert this plug into the connector port labeled 1. Insert the plug from your sensor/transducer (identified by a 2 on the plug) into the connector port labeled 2. Ports 3 and 4 are for trolling speed and water temperature accessories, should you choose to purchase them. Now assemble the connector and connector cover to the mounting bracket with two screws as shown below, making sure that the cables come out through the slots at the bottom of the cover. Be careful not to over-tighten the screws.
Installing the Platinum ID Install the Platinum ID unit onto the mounting bracket by aligning the bracket with the latch cover on the rear of the unit and sliding firmly downward until the unit is fully seated. When properly installed, all connections will be made automatically and the unit cannot be pulled off its mount without first depressing the latch. The unit may now be tilted to the best viewing angle. The rubber feet on the outside of the case will help prevent slipping or skidding when adjusting the viewing angle. The Platinum ID Portable is designed to use two 6-volt lantern batteries with the spring-type terminals. Any type of 6-volt lantern battery may be used. However, for maximum battery life we recommend using heavy -duty alkaline batteries. The actual life of a set of batteries can vary greatly depending on the type of batteries, the temperature, and use of the backlight. At temperatures above 70 degrees, with a new set of heavy-duty alkaline batteries, and without using the backlight, you can expect about 65 hours of operation. As the temperature decreases, battery life will also decrease. If possible, keep the batteries warm during use to maximize their life.

Installing the Batteries To install the batteries, first remove the two battery covers located on each side of the lower case. To do this, grasp the front of the cover by the handle provided and lift upward to release, as shown below. Orient the batteries as shown and insert them into the battery compartments, making sure that the spring terminals make good contact with the brass terminal strips and that the batteries are fully seated. Replace the battery covers by first inserting the tab at the rear of the cover into the slot in the lower case, then pushing down on the front of the cover. The cover will snap into place, and battery installation is complete.
The Platinum ID Portable battery compartments have been designed to accept commercially available batteries with an overall height within industry tolerance. However, some batteries may be slightly shorter, preventing the spring terminals from contacting the brass terminal strips in the lower case. Should this occur, stretch the spring terminals slightly so that they contact the brass terminal strips in the lower case.
Assembling the Portable Sensor
Your Platinum ID Portable Case includes all the necessary hardware to convert your Platinum ID sensor/transducer for portable installations. Assembly instructions for the Platinum ID 120 sensor are included below, and instructions for the Platinum ID 600 transducer are on the following page. The assembly of your portable sensor or transducer is shown in the illustrations provided.
Platinum ID 120 Sensor Assembly Position the bracket with washers on each side of the mounting holes between the mounting ears on the sensor. Next, insert the thumbscrew through the entire assembly and install the flat washer and wing nut on the thumb screw. This design allows for sensor angle adjustment without the need for tools. Next, attach the rubber suction cup to the bracket with the Phillips head screw as shown. Be careful not to over-tighten the screw. Unwind the cable and adjust the sensor so that it is at a 90-degeree angle to the bracket. Your portable sensor is now ready for installation.

Assembling the Portable Transducer
Position the bracket and tooth washers between the mounting ears of the transducer. Then, insert the thumbscrew through the entire assembly and attach the flat washer and wing nut on the thumbscrew. This design allows you to adjust the transducer angle without tools. Attach the bracket to the suction cup with the Phillips head screw, being careful not to over tighten the screw. Unwind the cable and adjust the transducer so that it is at a 90-degree angle to the bracket. Your portable transducer is now ready for installation.
Mounting the Sensor/Transducer It is important that the sensor/transducer be mounted on the transom where water flow is in constant contact with the sensor/transducer. You may want to observe the rear of the boat while it is moving through the water to determine the best mounting location. Optimal location for mounting is an area on the transom which provides a smooth, flat surface for the suction cup while keeping the sensor/transducer in contact with the water at all times. First, unwind the cable and position the sensor/transducer as shown below with respect to the bracket and tighten the thumbscrew. Next, attach the suction cup to the transom, making sure that the bottom of the sensor/transducer is below the bottom of the boat; the top of the sensor/transducer must remain above the bottom of the transom. The suction cup will stick equally well above or below the water line. Dampening the suction cup by dipping it in hot water before installation will give a better hold on a dry surface. The upper tip of the sensor/transducer bracket is designed to hold the suction cup onto the boat at idle or low speeds. Do not use the upper tip as a handle to remove the suction cup.
Securing the Sensor/Transducer
Caution: Tie-down the sensor/transducer cable holder, as shown above, to ensure that if the suction cup comes loose the sensor/transducer will not be damaged by the propeller, thrown into the boat, or pull the unit out of the boat. Humminbird is not responsible for any damage due to the suction cup coming loose.
The portable sensor/transducer can also be used without the suction cup if you have a fiberglass boat with a single hull. The sensor/transducer should be placed in a small amount of water inside the hull of the boat so that the sensor/transducer can shoot through the hull. The water must be in direct contact with the boat hull and there cannot be any air between the bottom of the sensor/transducer and the hull of the boat. When operating at high speeds, some boat hulls will create turbulence (bubbles) that will interfere with the operation of the Platinum ID. When youre finished using the Platinum ID Portable, wrap the cable around the suction cup and place the transducer in the nest between the battery compartments of the portable case.

Item includes a one-year full warranty.
TECHSONIC INDUSTRIES, INC. Service Dept. Three Humminbird Lane Eufaula, AL 36027

 

Tags

DVX392H W2242PM-SS 60AZ-AR RDR-GX255 EX-Z29 Illustrator CS MWA21A VSA-E07 1250 MD TLP 450 KD-LX555R CW-29Z408T 50PS2000 4 0 LH-W9656IA S2800HD SCC-C6435P 8000U C4500 Software F85060VI KP501 DX-600 Laminer ARX4570 Model 3000 KRC-578R GA-H55m-ud2H MV-MV830I 42HMC 1064B-5 Pursuit 2 Isofix Pctv 50E UX-16 VR-8050 MG-553MD AR-203EX CMT-EH20DAB Photosmart 735 Aastra M760 Calculator NV-U94T Cs-18 DPF-V800 AVR 2000 Nuvi 265W AQV09nsbn D6510 Compacte Dvdr610-00 Octane TXL37S10E 707II CS-10 CBM-270 DCR-TRV285E C-60 Zoom Kxtcd950 Iw G DVP3350V-19 Samsung S852 10 0 5450 VI EA130 WM2044CW EWF1029 EMX512SC Deskjet 6980 HBV-100 WN-151ARM CQ-C3303N HYS-222 Watch U600 28PW8506-19 Korg PA50 MVX330I FTR9964-69S CS-321 SWF-P12 LH-D6245A Finepix A605 MB-1001 V-LUX 1 HM400JI Lifestyle V30 RCM 169 GC-405 ESF6145 14U 34B 8400 GS EW935S SP1203N Express 121 SC150 Maxima 3000CR PET988 G2180 CA-CC30N

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101