Reviews & Opinions
Independent and trusted. Read before buy Binatone Icarus 2020!

Binatone Icarus 2020

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page 

Download (English)
Binatone Icarus 2020, size: 2.3 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Binatone Icarus 2020About Binatone Icarus 2020
Here you can find all about Binatone Icarus 2020 like twin and other informations. For example: triple.

Binatone Icarus 2020 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Binatone Icarus 2020 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Binatone Icarus 2020 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

USER GUIDE

Icarus 2020 system
GUARANTEE AND SERVICE The Icarus 2020 system is guaranteed for 12 months from the date of purchase shown on your sales receipt. This guarantee does not cover any faults or defects caused by accidents,misuse, fair wear and tear, neglect, faults on the telephone line, lightning, tampering with the equipment, or any attempt at adjustment or repair other than through approved agents.
Please keep your sales (till) receipt this is your guarantee. You should also keep the original packaging material. In the unlikely event that you need to return your Icarus 2020 system to our Repair Centre while it is under guarantee, there will be a 5 handling charge.

TABLE OF CONTENTS

1 IMPORTANT SAFETY INSTRUCTIONS... INSTALLING YOUR PHONE... 5
2.1 CONNECTING THE BASE STATION... 5 2.2 INSTALLING AND CHARGING THE BATTERIES.. 5
5 PRIVATE PHONEBOOK....15
5.1 5.2 5.3 5.4 5.5 5.6 5.7 ADD A NEW PHONEBOOK ENTRY... 15 SEARCH A PHONEBOOK ENTRY.... 15 VIEW A PHONEBOOK ENTRY.... 17 EDIT A PHONEBOOK ENTRY... 17 DELETE A PHONEBOOK ENTRY.... 17 DELETE THE ENTIRE PRIVATE PHONEBOOK.. 17 CHECK THE PHONEBOOK USAGE... 17
IMPORTANT SAFETY INSTRUCTIONS
8 ANSWERING MACHINE... 25
8.1 TURN ON/OFF THE ANSWERING MACHINE... 25 8.2 LISTEN TO THE MESSAGES IN THE ANSWERING MACHINE.. 26 8.3 DELETE ALL MESSAGES IN THE ANSWERING MACHINE.. 27 8.4 RECORD MEMO.... 27 8.5 ANSWERING MACHINE SETTINGS... 28 8.5.1 SET THE ANSWER MODE... 28 8.5.2 SET THE OUTGOING MESSAGE (OGM) LANGUAGE (COUNTRY DEPENDENT).... 28 8.5.3 RECORD YOUR OWN OUTGOING MESSAGE (OGM)... 28 8.5.4 PLAYBACK AND DELETE THE OUTGOING MESSAGE (OGM).. 30 8.5.5 SET THE ANSWER DELAY... 30 8.5.6 SET THE RECORDING TIME OF INCOMING MESSAGE.. 30 8.5.7 CALL SCREENING... 31 8.5.8 CHANGE THE COMPRESSION RATE... 31 8.5.9 ACTIVATE REMOTE ACCESS... 31
3 GETTING TO KNOW YOUR PHONE... 6
3.1 HANDSET OVERVIEW... 6 3.2 BASE STATION WITH TELEPHONE ANSWERING MACHINE(TAM)CONTROL. 7 3.3 DISPLAY ICONS AND SYMBOLS... 8 3.4 MENU STRUCTURE.... 9 3.5 TEXT AND DIGIT ENTRY TABLE... 9 3.5.1 LATIN CHARACTER SET....10 3.5.2 PHLISH CHARACTER SET... 10 3.5.3 NORWEGIAN CHARACTER SET... 10 3.5.4 GREEK CHARACTER SET... 11
While the unit is under Guarantee 1. Disconnect the base unit from the telephone line and the mains electricity supply. 2. Pack up all parts of your Icarus 2020 system , using the original packaging. 3. Return the unit to the shop where you bought it, making sure you take your sales receipt. Remember to include the mains adapter. After the Guarantee has expired If the unit is no longer under Guarantee, first follow steps 1 and 2 as for repair under Guarantee. Then. 3. Call Helpline on 9677 (for UK only) and ask for a quotation of the repair charge and details of where to send your Icarus 2020 system for repair. 4. Make sure you include with your Icarus 2020 system. Your name and address A cheque or postal order for the value of the repair 5 Return your Icarus 2020 system to the address given by the Service Department. * This does not affect your statutory rights.
6 CALLER DISPLAY (NETWORK DEPENDENT)...18
6.1 6.2 6.3 6.4 6.5 VIEW THE CALL LIST... 18 STORE A CALL LIST NUMBER INTO THE PHONEBOOK.. 18 DELETE AN ENTRY IN THE CALL LIST.. 19 DELETE THE ENTIRE LIST OF THE CALL LIST.. 19 VIEW THE DETAILS OF THE CALL LIST ENTRY.. 19

7 PHONE SETTINGS...19

7.1 DATE AND TIME SETTINGS... 19 7.1.1 CHANGE THE DATE FORMAT... 19 7.1.2 CHANGE THE TIME FORMAT... 19 7.1.3 SET THE TIME.... 19 7.1.4 SET THE DATE.... 20 7.2 ALARM SETTINGS.... 20 7.2.1 TURN ON/OFF THE ALARM... 20 7.2.2 SET THE ALARM TIME.... 21 7.3 HANDSET SETTINGS... 21 7.3.1 SET THE RINGER RINGTONE FOR INTERNAL CALLS.. 21 7.3.2 SET THE RINGER MELODY FOR EXTERNAL CALLS.. 21 7.3.3 SET THE RINGER VOLUME... 21 7.3.4 SET ALERT TONES... 21 7.3.5 SET THE HANDSET LANGUAGE... 22 7.3.6 RENAME THE HANDSET.... 22 7.3.7 CHOOSE THE INFORMATION TO BE DISPLAYED IN IDLE.. 22 7.3.8 SET THE AUTO ANSWER.... 22 7.4 BASE SETTINGS... 22 7.4.1 SET THE BASE RINGER MELODY... 22 7.4.2 SET THE RINGER VOLUME... 23 7.4.3 DE-REGISTER A HANDSET... 23 7.4.4 CHANGE THE DIAL MODE... 23 7.4.5 CHANGE THE FLASH (RECALL)TIME... 23 7.4.6 CHANGE THE SYSTEM PIN CODE.. 24 7.5 REGISTRATION.... 24 7.6 RESET YOUR PHONE.... 25

TROUBLESHOOTING....33

4 USING YOUR PHONE...11
4.1 MAKE A CALL.... 11 4.1.1 PREPARATORY DIALING....11 4.1.2 DIRECT DIALING...11 4.1.3 CALL FROM THE PHONEBOOK...11 4.1.4 CALL FROM THE CALL LIST... 11 4.1.5 CALL FROM THE REDIAL LIST(ONLY AVAILABLE WITH CALLER DISPLAY). 12 4.1.6 CALL TIMER....12 4.2 ANSWER A CALL... 12 4.3 END A CALL.... 12 4.4 ADJUST EARPIECE VOLUME... 12 4.5 MUTE A CALL.... 12 4.6 SET THE SILENT MODE... 12 4.7 TURN ON THE KEYPAD LOCK... 13 4.8 REDIAL THE LAST NUMBER... 13 4.8.1 REDIAL A NUMBER FROM THE REDIAL LIST..13 4.8.2 STORE A REDIAL NUMBER INTO THE PHONEBOOK..13 4.8.3 DELETE A REDIAL NUMBER...13 4.8.4 DELETE THE ENTIRE REDIAL LIST...13 4.9 FIND THE HANDSET.... 14 4.10 MAKE AN INTERNAL CALL(FOR MULTI-HANDSET VERSIONS ONLY ).. 14 4.10.1 INTERCOM ANOTHER HANDSET...14 4.10.2 CALL ALL HANDSETS...14 4.10.3 TRANSFER AN EXTERNAL CALL TO ANOTHER HANDSET..14 4.10.4 MAKE A 3-WAY CONFERENCE CALL...15
DECLARATION OF CONFORMITY.. 34
Digital Cordless Telephone
THIS EQUIPMENT IS NOT DESIGNED FOR MAKING EMERGENCY TELEPHONE CALLS WHEN THE POWER FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.
Before operating this set, please read these instructions carefully.
CLEANING AND CARE Do not clean any part of your Icarus 2020 system with benzene, thinner or other solvent chemicals this may cause permanent damage which is not covered by the Guarantee. When necessary, clean it with a damp cloth. Keep your Icarus 2020 system away from hot, humid conditionsor strong sunlight,and don't let it get wet. Every effort hasbeen made to ensure high standards of reliability for your Icarus 2020 system However, if something does go wrong, please do not try to repair it yourself consult your supplier or the Helpline.
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1) Read and understand all the instructions. 2) Follow all warnings and instructions marked on the product. 3) Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4) Do not use this product near water (for example, near a bath tub, kitchen sink, swimming pool). 5) Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 6) Unplug this product from the wall outlet and refer servicing to our Repair Centre under the following conditions: When the power supply cord or plug is damaged or frayed. If the product does not operate normally by following the operating instructions. If the product has been dropped and the cabinet has been damaged. If the product exhibits a distinct change in performance. 7) Unless it is an emergency, avoid using the telephone during an electrical storm.There may be a remote risk of electric shock from lightning. 8) Do not use the telephone to report a gas leak in the vicinity of the leak. 9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation periods for the handsets are only applicable with the default battery capacities 10) The use of other battery types or non-rechargeable batteries/primary cells can be dangerous. These may cause interference and/or damage to the unit or surroundings. The manufacturer will not be held liable for damage arising from such non-compliance. 11) Do not use third party charging bays. Damage may be caused to the batteries. 12) Please ensure the batteries are inserted in the correct polarity. 13) Dispose of batteries safely. Do not immerse them in water, burn them, or put them where they could get punctured. Package contents The package contains the following items: Single Twin 1 Handset 2 Handsets 1 Base station 1 Base station 1 Mains power adapter 1 Mains power adapter 1 Telephone line cord 1 Telephone line cord 4 rechargeable batteries 2 rechargeable batteries 1 User manual 1 User manual 1 Charger pod with a connected mains power adapter

Indicates when there are more characters or numbers after those being displayed. Press the MENU/OK key to access the main menu. Press the MENU/OK key to confirm the current selection. Indicates new TAM message / new call in TAM message list / call list. Press the C/MUTE key to start an intercom call.
Press the C/MUTE key to go back to the previous menu level or cancel the current action. Press the C/MUTE key to clear a character, stop the alarm, or mute/unmute the microphone during a call.

Latin Character Set

Number Editing (For phone Alphanumeric Editing (For phonebook name editing and renaming handset) number editing,date/time editing)
3.4 Menu Structure In idle mode, press <MENU/OK> to access the Call List menu. Refer to the following for the menu structure.

Key Press * #

1st space A D G J M P T W 0 * #
2 nd 3rd 4th 5th 6th 7th 8th 9th 10th 1 B C 2 E F 3 H I 4 K L 5 N O 6 Q R S 7 U V 8 X Y Z 9 ? / , \ (. )
9 0, or P (Pause) if press and hold * # Number Editing (For phone editing, date/time editing) 9 0, P (Pause) * #

<UP/DOWN>

Key Press

Polish Character Set

Alphanumeric Editing (For phonebook name editing and renaming handset) 1st SP A D G J M P T W nd 3rd 1 B C E F H I K L N O Q R U V X Y 4th S 8 Z 5th 6th 7th 8th 9th 10th
During a call: Press to end a call and go back to idle screen In menu / editing mode: Press to go back to previous menu In idle mode: Press and hold to power off the handset In idle mode (when the handset is powered off): Press and hold to power

TALK OFF

During a call: Press to turn on / off the speakerphone. Call List / Phonebook entry : Press to make a call with speakerphone During ringing: Press to answer a call with speakerphone During answering machine message playback / call screening: Press to play message via speaker

SPEAKERPHONE

In idle / predialing mode: Press to insert a recall During a call:Press to dial a recall
RECALL(also called FLASH)

HS SETTINGS

REGISTRATION DEFAULT ANS. MACHINE
PIN? - - - - MSG PLAYBACK DELETE ALL MEMO TAM ON/OFF TAM SETTINGS ANSWER MODE TAM LANGUAGE OGM SETTINGS ANSWER DELAY RECORD TIME REMOTE ACC COMPRESSION SCREENING CHANGE PIN
ALARM PIN? - - - RING SETUP TONE SETUP LANGUAGE RENAME HS HS DISPLAY AUTO ANSWER DATE & TIME

Norwegian Character Set

Alphanumeric Editing (For phonebook name editing and renaming handset) 1st SP A D G J M P T W nd 3rd 1 B E F H I K L N O Q R U V X Y 4th

C S 8 Z

3.5 Text and Digit Entry Table The following table shows you where each letter and punctuation character can be found, by using repeated presses of the alphanumeric keypad. This will be helpful when storing a name in the phonebook and renaming your handset. In editing mode, a cursor is displayed to indicate the current text entry position. It is positioned at the right of the last character entered. Writing Tips: 1. Once a character is selected, the cursor will move to the next position after a short pause. 2. You can move the cursor within the text with the <UP/DOWN> keys to amend the text entry. 3. Press <C> to delete the last character. 4. Press and hold <C> to delete the entire text string.
Number Editing (For phone editing, date/time editing) 9 0, P (Pause) * #

6th 7th

8th 9th 10th

Greek Character Set

Alphanumeric Editing (For phonebook name editing and renaming handset) Number Editing (For phone editing, date/time editing) 9 0, P (Pause) * #

1st SP A H K 0

2 nd 3rd 1 B E I

4th 8 9

4.1.5 Call from the redial list Press <DOWN> to access the redial list and press <UP/DOWN> to select the desired redial number. Press <TALK ON> / <SPEAKER PHONE> to dial out the selected redial number. Note: You can also access the Redial List by pressing the <REDIAL> key. 4.1.6 Call timer Your handset automatically times the duration of every call. The call timer is displayed 15 seconds after dialling, and remains on the screen for 5 seconds after the end of the call.It is shown in hours, minutes and seconds format (HH:MM:SS). 4.2 Answer a Call If the handset is not on the charging cradle: When the phone rings, press <TALK ON> / <SPEAKER PHONE> to answer a call. Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or charger will answer the call automatically, and no buttons need to be pressed. 4.3 End a Call During a call press <TALK OFF> to end the call. OR Put the handset on the base station or charger to end the call.
4.7 Turn on the Keypad Lock In idle, press and hold <STAR/*> to turn on the keypad lock. The KEYPAD LOCK icon is displayed on the LCD. Note: You can still use <TALK ON> / <SPEAKER PHONE>to answer a call when the handset is ringing. To turn the keypad lock off, press and hold <STAR/*> again. 4.8 Redial the last number You can redial any of the 5 last numbers called. If you have stored a name in the phonebook to go with the number, the name will be displayed instead. The most recent last number will display at the top of the redial list. 4.8.1 Redial a Number from the Redial List 1. In idle mode, press <DOWN> to access the redial list. Note: If the redial list entry shows a name, press <Hash/#> to view the number of this entry. 2. Press <UP/DOWN> to browse the redial list. 3. Press <TALK ON> / <SPEAKER PHONE> to dial to the selected redial number. Note: If there are no numbers in the redial list, the display shows EMPTY . 4.8.2 1. 2. 3. 4. 5. 6. Store a Redial Number into the Phonebook Follow Steps 1 and 2 in section 4.8.1. Press <MENU> and <UP/DOWN> to select ADD TO PB. Press <OK> and then enter the name you want to use in the phonebook. Press <OK> and then modify the number, if necessary. Press <OK> to show <MELODY 1>. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will be played when browsing the ringtone list. (Note: the selected melody will only be played if you subscribe to Caller Display and the incoming number matches the stored number.) 7. Press <OK> to confirm, and the entry will be stored. 4.8.3 Delete a Redial Number 1. Follow Steps 1 and 2 in section 4.8.1. 2. Press <MENU> and <UP/DOWN> to select DELETE. 3. Press <OK> to confirm, and the entry will be deleted. 4.8.4 Delete the Entire Redial List 1. Follow Steps 1 and 2 in section 4.8.1. 2. Press <MENU> and <UP/DOWN> to select DELETE ALL 3. Press <OK> to display <CONFIRM?>. 4. Press <OK> to confirm. All entries will be deleted and the display will show <EMPTY>.

4.10.4 Make a 3-way Conference Call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no additional network subscription is required. During an external call: 1. Follow Steps 1 to 4 in section 4.10.3. 2. Press and hold <STAR> on the calling handset to establish the conference call Either handset can exit the conference by pressing <TALK OFF>, leaving the other handset still connected to the external call.
4 You can also use the codes on the other side of this card
1 Using a tone-dialling phone, dial your home number 2 While your outgoing message is playing, press 3 Key in your remote security code
Note: If your answering machine is switched off, the phone will enter into the remote access mode after 10 rings. You can then enter the 4-digit remote access PIN (Default Remote Access PIN is 0000) to activate the remote access feature.

Remote operation

The default code is 0000. For details of how to set a new code, see the User Guide 8.5.9.1 of page 31.
Note: Press <*> key after OGM playback cannot access your answering machine remotely. If the 4-digit Remote Access PIN is entered incorrectly three times consecutively, the line will be released automatically.

PRIVATE PHONEBOOK

USING YOUR PHONE
4.1 Make a Call 4.1.1 Preparatory Dialing Enter the phone number and press <TALK ON> / <SPEAKER PHONE> to connect to the line and dial the number. When entering the number, if you make a mistake, press <C> to delete digits. 4.1.2 Direct Dialing Press <TALK ON> / <SPEAKER PHONE> to connect to the line and then enter the phone number. (Note: if you enter a wrong digit you cannot correct it with the <C> key.) 4.1.3 Call from the phonebook Press <PHONEBOOK> to access the phonebook and press <UP/DOWN> to select the desired phonebook entry. Press <TALK ON> / <SPEAKER PHONE> to dial out the selected phonebook entry. Note: You can also access the phonebook by pressing <MENU/OK>, <DOWN>, <MENU/OK>. Note: The alphanumeric keys provide a short-cut to find entries beginning with the corresponding letters. 4.1.4 Call from the Call List (only available with Caller Display) Press <UP> to access the Call List and press <UP/DOWN> to select the desired Call List entry. Press <TALK ON>/ <SPEAKER PHONE> to dial out the selected Call List entry. Note: You can also access the Call List by pressing <MENU/OK> twice.

Each handset can store up to 20 private phonebook entries with names and numbers. Each phonebook entry can have a maximum of 20 digits for the phone number and 12 characters for the name. You can also select different ringtones for your phonebook entries. (Note: the different ringtones only play if you subscribe to Caller Display and the incoming number matches the stored number.) Phonebook entries are stored alphabetically by name. 5.1 Add a New Phonebook Entry In idle: 1. Press <PHONEBOOK> to access the phonebook. OR Press <MENU> and <UP/DOWN> to select PHONEBOOK and then press <OK> to access the phonebook. 2. Press <MENU> to show ADD. 3. Press <OK> and then enter the name. 4. Press <OK> and then enter the number. 5. Press <OK> and <UP/DOWN> to select the desired ringtone for your phonebook entry. 6. Press <OK> to store the phonebook entry. 5.2 Search a Phonebook Entry In idle: 1. Press <PHONEBOOK> to access the phonebook. 2. Enter the first letter of the name using the alphanumeric keys, and then <UP/DOWN> to scroll to the entry you want.
4.4 Adjust Volume There are 5 levels (VOLUME 1 to VOLUME 5) to choose the earpiece or speakerphone volume. During a call: Press <UP/DOWN> to select volume 1-5. The current setting is shown. When you end the call, the setting will remain at the last selected level. 4.5 Mute a Call You can talk to someone nearby without letting the caller hear you during a call. During a call: Press <C> to mute the microphone and MUTED will display on the LCD. Your caller cannot hear you. Press <C> again to unmute the microphone. 4.6 Set the Silent Mode In idle, press and hold <HASH/#> to turn off the handset ringer. The RINGER OFF icon is displayed on the LCD. Note: The display will still flash the Call icon and show CALL or the Caller Display number, when there is an incoming call, even if the ringer is turned off. To turn the ringer back on, press and hold <HASH/#> again.
5.3 View a Phonebook Entry In idle: 1. Press <PHONEBOOK> to access the phonebook. 2. Press <UP/DOWN> to select the desired phonebook entry. 3. Press <MENU> and <UP/DOWN> to select VIEW. 4. Press <OK> and <UP/DOWN> to review the name, number and ringtone of the selected phonebook entry. Note: If the number is more than 12 digits, press <LEFT SOFT KEY> or <RIGHT SOFT KEY> to view the remaining digits. 5.4 Edit a Phonebook Entry In idle: 1. Press <PHONEBOOK> to access the phonebook. 2. Press <UP/DOWN> to select the desired phonebook entry. 3. Press <MENU> and <UP/DOWN> to select EDIT. 4. Press <OK> to display the current name. 5. Edit the name and press <OK>. 6. Edit the number and press <OK> 7. Press <UP/DOWN> to select the ringtone and press <OK> to confirm. 5.5 Delete a Phonebook Entry In idle: 1. Press <PHONEBOOK> to access the phonebook. 2. Press <UP/DOWN> to select the desired phonebook entry. 3. Press <MENU> and <UP/DOWN> to select DELETE. 4. Press <OK> to confirm, and the entry will be deleted. Delete the Entire Private Phonebook Press <PHONEBOOK> to access the phonebook. Press <MENU> and <UP/DOWN> to select DELETE ALL. Press <OK> to display <CONFIRM?>. Press <OK> to confirm. All entries will be deleted and the display will show <EMPTY>. 5.7 Check the Phonebook Usage You can check how many phonebook entries are stored in your handset and how many phonebook entries are available for you to store in the phonebook. 1. Press <PHONEBOOK> to access the phonebook. 2. Press <MENU> and <UP/DOWN> to select PB STATUS. 3. Press <OK> to display how much of the phonebook is being used, for example <14/20 USED> means 14 entries are stored out of the total of 20 available spaces. 5.6 1. 2. 3. 4.

The Caller Display service only sends the month and date, not the year, so you may need to set the year. (This is used to calculate the day for the time stamp on answering machine models only).

PHONE SETTINGS

7.1.1 Change the Date Format 1. Press <MENU> and <UP/DOWN> to select HS SETTINGS. 2. Press <OK> and <UP/DOWN> to select DATE & TIME. 3. Press <OK> and <UP/DOWN> to select DATE FORMAT. 4. Press <OK> and <UP/DOWN> to select your desired date format (DD-MM-YYor MM-DD-YY ). 5. Press <OK> to confirm. 7.1.2 Change the Time Format 1. Press <MENU> and <UP/DOWN> to select HS SETTINGS. 2. Press <OK> and <UP/DOWN> to select DATE & TIME. 3. Press <OK> and <UP/DOWN> to select TIME FORMAT. 4. Press <OK> and <UP/DOWN> to select your desired time format (12 HR or 24 HR). 5. Press <OK> to confirm. 7.1.3 Set the Time 1. Press <MENU> and <UP/DOWN> to select HS SETTINGS. 2. Press <OK> and <UP/DOWN> to select DATE & TIME. 3. Press <OK> and <UP/DOWN> to select SET TIME. 4. Press <OK> and then enter the time information in 24 hour format.
5. Press <OK> to confirm. Note: If time has been set before, the current time will display, otherwise, HH:MM will display. 7.1.4 Set the Date 1. Press <MENU> and <UP/DOWN> to select HS SETTINGS. 2. Press <OK> and <UP/DOWN> to select DATE & TIME. 3. Press <OK> and <UP/DOWN> to select SET DATE. 4. Press <OK> and then enter the date information. The date entered will be in the date entered will be in the format you set in Section 7.1.1. 5. Press <OK> to confirm. Note: If date has been set before, the current date will display, otherwise, DD-MM-YY will display. 7.2 Alarm Settings You can set an alarm time on this phone. When an alarm is set, the <ALARM Icon> is shown on the handset display.When the alarm time is reached, the <ALARM icon> and ALARM ON flash on the handset display, and the alarm tone rings for 45 seconds. You can press any key to disable the alarm. If the snooze function is activated, the alarm will sound again at the end of the snooze period of seven minutes. You can also press and hold <TALK OFF> to , while the alarm is sounding,the snooze function. Note: a. A key press will still disable the alarm even if the handset keypad is locked when the alarm rings. b. The alarm volume level is the same as the settings of the handset ringer volume. If the handset ringer is set to VOLUME OFF, the alarm still sounds at VOLUME 1 level. c. During an external call or internal call, if an alarm is set and when the alarm time is reached, the <ALARM icon> and ALARM ON will still flash. An alarm tone will be emitted from the earpiece to alert the user the alarm time is reached. Once the user presses any key or presses and holds <TALK OFF> to disable the alarm, the display will revert to the call duration. d. During paging or ringing, the alarm will not sound when the alarm time is reached. However, if the snooze function is enabled and there is no paging or ringing, the alarm will sound again at the end of the snoo 7.2.1 Turn on/off the Alarm 1. Press <MENU> and <UP/DOWN> to select HS SETTINGS. 2. Press <OK> and <UP/DOWN> to select ALARM 3. Press <OK> and <UP/DOWN> to select ON/OFF. 4. Press <OK> to confirm. Note: If ON is selected, you will be asked to set the alarm time.

7.2.2 Set the Alarm Time (If Alarm time is set to be ON) 1. Follow Steps 1 to 4 in Section 7.2.1. 2. Enter the alarm time in 24 hour format. 3. Press <OK> to display "SNOOZE". 4. Press <OK> and <UP/DOWN> to select snooze ON or OFF. 5. Press <OK> to confirm. 7.3 Handset Settings 7.3.1 Set the Ringer Melody for Internal Calls 1. Press <MENU> and <UP/DOWN> to select HS SETTINGS. 2. Press <OK> and <UP/DOWN> to select RING SETUP. 3. Press <OK> and <UP/DOWN> to select INT RING. 4. Press <OK> and <UP/DOWN> to select the melody you want to hear for internal calls. Note: The respective melody will be played while browsing the ringtone list. 5. Press <OK> to confirm. 7.3.2 Set the Ringer Melody for External Calls 1. Press <MENU> and <UP/DOWN> to select HS SETTINGS. 2. Press <OK> and <UP/DOWN> to select RING SETUP. 3. Press <OK> and <UP/DOWN> to select EXT RING. 4. Press <OK> and <UP/DOWN> to select melody you want to hear for external calls. Note: The respective melody will be played while browsing the ringtone list. 5. Press <OK> to confirm. 7.3.3 Set the Ringer Volume 1. Press <MENU> and <UP/DOWN> to select HS SETTINGS. 2. Press <OK> and <UP/DOWN> to select RING SETUP. 3. Press <OK> and <UP/DOWN> to select RING VOLUME. 4. Press <OK> and <UP/DOWN> to select the desired ringer volume (a total of 6 ringer volume levels including VOLUME OFF). Note: The respective ringer volume will be played during your selection. If VOLUME OFF is selected, the <Ringer Off> icon will be displayed. 5. Press <OK> to confirm. 7.3.4 Set Alert Tones Three different alert tones are set on by default, but can be turned off, if desired. Key Tone - a single beep is emitted when you press a key. Low Battery Tone - emitted while you are talking on the phone to alert you that you need to charge the handset batteries. Out of Range Tone - emitted while you are talking on the phone to alert you to move loser to the base unit, before the call is lost.
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS. 2. Press <OK> and <UP/DOWN> to select TONE SETUP. 3. Press <OK> and <UP/DOWN> to select KEY TONE / BATTERY TONE / OUT OF RANGE. 4. Press <OK> and <UP/DOWN> to turn on or off these tones. 5. Press <OK> to confirm. 7.3.5 Set the Handset Language 1. Press <MENU> and <UP/DOWN> to select HS SETTINGS. 2. Press <OK> and <UP/DOWN> to select LANGUAGE. 3. Press <OK> and <UP/DOWN> to select the desired language. 4. Press <OK> to confirm. 7.3.6 Rename the Handset 1. Press <MENU> and <UP/DOWN> to select HS SETTINGS 2. Press <OK> and <UP/DOWN> to select RENAME HS. 3. Press <OK> and change the name of your handset, using <C/MUTE> to delete letters and the alphanumeric keys to enter up to 10 letters for the name. 4. Press <OK> to confirm. 7.3.7 Choose the Information to be Displayed in Idle You can choose to display time or handset name in your idle screen. 1. Press <MENU> and <UP/DOWN> to select HS SETTINGS. 2. Press <OK> and <UP/DOWN> to select HS DISPLAY. 3. Press <OK> and <UP/DOWN> to select HANDSET NAME or TIME. 4. Press <OK> to confirm. 7.3.8 Set the Auto Answer If you turn on the Auto Answer, you can answer a call automatically by just lifting the handset off the base or charger, without having to press any key. 1. Press <MENU> and <UP/DOWN> to select HS SETTINGS. 2. Press <OK> and <UP/DOWN> to select AUTO ANSWER. 3. Press <OK> and <UP/DOWN> to turn on or off the auto answer feature. 4. Press <OK> to confirm. 7.4 Base Settings 7.4.1 Set the Base Ringer Melody

7.4.3 De-register a Handset This operation should only be necessary if one of your handsets becomes faulty or lost and needs to be replaced. You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to de-register a handset from the base station.A de-registered handset will have the antenna icon flashing and "REGISTER" on the display. Note: You cannot de-register the handset that you are currently using. 1. Press <MENU> and <UP/DOWN> to select BS SETTINGS. 2. Press <OK> and <UP/DOWN> to select DELETE HS. 3. Press <OK> and the display shows "PIN?". 4. Enter the 4-digit system PIN. 5. Press <OK> and the first handset number is displayed. 6. Press <UP/DOWN> to scroll through the list of registered handsets and select the number of the handset you want to de-register. 7. Press <OK> to confirm, and the chosen handset will be de-registered. 7.4.4 Change the dial mode
You should normally leave the dialling mode at its default setting of TONE (also called DTMF) unlessthe phone is connected to an old exchange that only recognises PULSE dialling. Note: If PULSE dialling is set, you can press the * key to switch to TONE dialling for the rest of that call. 1. Press <MENU> and <UP/DOWN> to select BS SETTINGS 2. Press <OK> and <UP/DOWN> to select DIAL MODE. 3. Press <OK> and <UP/DOWN> to select TONE or PULSE (The current setting is indicated by an asterisk to the right). 4. Press <OK> to confirm.
7.6 Reset Your Phone You can reset your phone to the default settings. After a reset, all your personal settings and call list entries will be deleted, but your phonebook remains unchanged. 1. Press <MENU> and <UP/DOWN> to select DEFAULT. 2. Press <OK> and you are requested to enter the 4-digit system PIN. 3. Enter the 4-digit system PIN. 4. Press <OK> to display CONFIRM? 5. Press <OK> to confirm, and the phone will be reset to its default settings.
If answering machine is set to ON, <TAM ON icon> displays on the handset LCD and the 7-seg LED on the base station will display the number of incoming messages. If answering machine is set to OFF, <TAM ON icon> will disappear from the handset LCD and the 7-seg LED on the base station will display - -. 8.2 Listen to the Messages in the Answering Machine

ANSWERING MACHINE

Your phone includes a telephone answering machine that records unanswered calls when it is on.The LED message counter (two digits seven segment display) on the base will show the number of the messages when the answering machine is on. The answering machine can store up to 59 messages within the maximum recording time of approximately 15 minutes. As well as recording incoming messages, you can record memos for other users of your phone. If the answering machine memory is full, the Handset will display TAM FULL and the handset name alternatively in standby, or display TAM FULL and the date/time information in standby which depends on which kind of information (Handset name or Date/Time See Section 7.3.7) is selected to display in Standby. 8.1 Turn On/Off the Answering Machine You can turn on or off the answering machine through the base or handset. When the answering machine is set to ON, calls will be answered after the set answer delay and the caller can then leave you a message. When the answering machine is set to OFF, calls will be answered after 10 rings and the answer only message will be played to your callers. They will not be able to leave you a message. Through the Base: 1. Press <TAM ON/OFF> on the base station. If answering machine is set to ON, <TAM ON icon> displays on the handset LCD and the 7-seg LED on the base station will display the number of incoming messages. If answering machine is set to OFF, <TAM ON icon> will disappear from the handset LCD and the 7-seg LED on the base station will display - -. Through the Handset: 1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE. 2. Press <OK> and <UP/DOWN> to select TAM ON/OFF. 3. Press <OK> and <UP/DOWN> to select ON or OFF. 4. Press <OK> to confirm.

Answering Machine Settings
You can use the TAM SETTINGS menu through the handset to change the settings of your answering machine. 8.5.1 Set the Answer Mode By default, the answer machine is set in ANS & REC mode which allows callers to leave a message. This mode can be changed to ANSWER ONLY which does not allow callers to leave a message. In that case, your callers will be prompted to call back later. 1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE. 2. Press <OK> and <UP/DOWN> to select TAM SETTINGS. 3. Press <OK> and <UP/DOWN> to select ANSWER MODE. 4. Press <OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY. 5. Press <OK> to confirm. 8.5.2 Set the Outgoing Message (OGM) Language. The answering machine announces the outgoing message when it answers a call. There is a pre-set OGM for each of ANS & REC mode or ANSWER ONLY mode,which can only be in English on this model. 1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE. 2. Press <OK> and <UP/DOWN> to select TAM SETTINGS. 3. Press <OK> and <UP/DOWN> to select TAM LANGUAGE. 4. Press <OK> and <UP/DOWN> to select your desired OGM language. 5. Press <OK> to confirm. 8.5.3 Record Your Own Outgoing Message (OGM) You can record your own OGM for ANS & REC mode or ANSWER ONLY mode. When you record your own OGM, it will be used when the answering machine answers the call. If your personalised OGM is deleted, the pre-set OGM will be restored automatically. 1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE. 2. Press <OK> and <UP/DOWN> to select TAM SETTINGS. 3. Press <OK> and <UP/DOWN> to select OGM SETTINGS. 4. Press <OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY. 5. Press <OK> and <UP/DOWN> to select RECORD MESS. 6. Press <OK> to start recording your personalised OGM and RECORDING is displayed on the screen. 7. Press <OK> to stop and save your personalised OGM. Your newly saved OGM will playback automatically. Alternatively, press <BACK> to return to previous screen without saving the personalised OGM.

Record Memo

You can record your memo message for another user. When you record a memo, the message counter will increase by one and the message can be played back in the same way as answering machine messages. Memo recording can still function even when the answering machine is turned off. 1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE. 2. Press <OK> and <UP/DOWN> to select MEMO. 3. Press <OK> to start memo recording and RECORDING is displayed. 4. Press <OK> to stop memo recording and save the memo. OR 4. Press <C> to stop memo recording without saving and return back to ANS. MACHINE menu.

4. Press <OK> and <UP/DOWN> to select your desired recording time. 5. Press <OK> to confirm.
8.5.7 Call Screening When the answering machine is set to ON and when there is an incoming message, At any time if you want to pick up the call, you can press <TALK ON> / <SPEAKER PHONE> on the handsetand the message recording will be stopped automatically. If the answering machine is in the process of recording, the message already stored will be saved. 8.5.7.1 Turn Base Screening On or Off You can listen via the base speaker to callers leaving a message, before deciding whether to take a call or to leave the answering machine to record a message. The call screening can be turned on or off using the SETTINGS menu on your handset. 1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE. 2. Press <OK> and <UP/DOWN> to select TAM SETTINGS. 3. Press <OK> and <UP/DOWN> to select SCREENING. 4. Press <OK> and <UP/DOWN> to select ON or OFF. 5. Press <OK> to confirm.
5. Press <OK> to enter the New PIN. 6. Press <OK> to enter the New PIN again. Note: If the new PIN entered in Step 6 is not the same as the new system PIN entered in Step 5, you must enter the new system PIN at step 5 again. 7. Press <OK> to reconfirm. 8.5.9.2 Activate or Deactivate the Remote Access 1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE. 2. Press <OK> and <UP/DOWN> to select TAM SETTINGS. 3. Press <OK> and <UP/DOWN> to select REMOTE ACC 4. Press <OK> and <UP/DOWN> to select ON or OFF to turn the remote access on or off respectively. 5. Press <OK> to confirm. 8.5.9.3 Access Your Answering Machine Remotely You can ring your phone from another tone-dialing phone to switch the answering machine on or off, and/or listen to your messages remotely. 1. Place a call from a tone-dialing phone to your phone. 2. When the answering machine answers the call and starts playing the OGM, press <KEY *>. 3. Enter the 4-digit Remote Access PIN (default PIN is 0000). Note: The * must be entered while the OGM is still playing, and the 4-digit PIN should be follow without any delays. Note: If the 4-digit Remote Access PIN is entered incorrectly three times consecutively, the line will be released automatically. 4. Press the following keys to carry out your desired function.

Keys While message is not playing 9 * Play the message Turn on the answering machine Turn off the answering machine Enter the 4-digit remote access PIN

TROUBLESHOOTING

a.The connection cord of the base station is not plugged in. b.The adapter cord is not plugged in correctly in the base station. c. Another handset is using the base to make a call. d. Wrong telephone line cord a.Check the connections. Unplug and plug back in the mains. Check that the telephone cord has been plugged into the base station and the phone socket. b.Check the base station plug and the 230V plug (remove and plug-in). c.Wait until the line is unoccupied. d.Use the original telephone line cord supplied Insert the dialing prefix

Problem

No dialing tone when pressing <TALK ON> <SPEAKER PHONE> key

Solutions

Dialing prefix is needed. When connect to a PBX, no and/or wrong connection after dialing.
Try making a call. If this works, the line is OK. If the call does not work, and you are using a two-way socket adapter, remove it and plug a telephone directly into the socket. If the call now works, the adapter may be faulty. If you cannot make a call, the fault may be on the exchange line. Contact the service provider (the BT engineers on 151 for UK only, or your cable company). If you still cannot identify the cause of the problem, please read out the serial number of this telephone to the Binatone Customer Service Center. The serial number can be found in the battery compartment after having the batteries removed. For technical support, call Binatone Customer Service at 9677 (UK only).
We the manufacturer / Importer : Binatone Telecom Plc, 1 Apsley Way London, NW2 7HF. Declare under our sole responsibility that the following product Type of equipment: Digital cordless telephone Model Name: Icarus 2020 Country of Origin: China Brand: Binatone complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters, the Council Directive 89/336/EEC on the approximation of the laws of the Member Statesrelating to electromagnetic compatibility (EMC) and the European Community Directive 2006/95/EC relating to Electrical Safety. Assessment of compliance of the product with the requirements relating to the essential requirements according to Article 3 R&TTE was based on Annex III of the Directive 1999/5/EC and the following standard:
DECLARATION OF CONFORMITY
"SEARCHING" is displayed. a. Base station out of range. Reduce the range. b. Base station not Connect base station to mains. connected to mains. The call does not work. No display. Service not activated or wrong operator or wrong setting Empty battery The answering machine is turned off. a. The answering machine is turned off. b. Message memory is full. Check your Subscription with network or change the dial mode. Recharge battery Turn on the answering machine. a. Turn on the answering machine. b. Erase unnecessary messages.

 

Tags

Bouilloire Nx-670 DMC-FS4 7115F Aficio 161F GA-P55-us3L 6L-2003 KT7A-raid SC-8850 LP-S6500 Smartfinder Lens AVR-687 BV3950T SW62ASP Krups 880 Laserjet 2550 KX-T7425 30169 CDX-L480X KD-AV7001 I865 CS Estate Bassman 100 Alero 1999 LE32C535 MCD395 FS-1016MFP Synkron 200Y Cybertron PDF Printer Mf 4461 PTS-507 RDR-HX1010 SCX-4824FN XEV E90-1 P4018WT AR01 6 0 Kxtg7301MB Goforce 5500 Blackberry 6230 MCD708-37B Romeo GT FW780 E-100RS Regal PCV-RX304 SA-HT650 SUB 201A Masterview AF-1 Sony C-480 SH-FX60 Series NV-DS37B WT1485CW Aspire 9500 Coupe Control VOX 300 Philips 162 Gr-dv3000 42LG50FR-MA Roland E-50 KDL-52XBR9 TRX 850 S3115H Guide XR-CA320X Pagepro 5650 1001K UX-310 Fishfinder 740IL System AL-1540CS HP126F2K F7310 HT-C720 TX-32LED7FM Triple MC-D112B G31M-VS Yamaha MA10 SU-V620 Gz-mg77 Lounge DVD-S75 Booklet DCP-8040 Sagem D80C CL-50 IC-229A-e-H Powerpack ITD 61 MS-7104 Cinefortune 200 Omnipage SE LT-P326W ROC 4406 DSC-W200

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101