Ersatzteilbestellung Seite 32-34
Geben Sie bei Ersatzteilbestellungen bitte die vollstndige Artikelnummer, die Ersatzteilnummer, die bentigte Stckzahl und die Seriennummer des Gertes (siehe Handhabung) an. Bestellbeispiel: Art.-Nr. 07681-500 / Ersatzteil-Nr. 10100030 / 2 Stck / Serien-Nr.:.. Bewahren Sie die Originalverpackung des Gertes gut auf, damit sie spter u. U. als Transportverpackung verwendet werden kann. Warenretouren sind nur nach Absprache und mit transportsicherer (Innen-)Verpackung, mglichst im Originalkarton vorzunehmen. Wichtig ist eine detaillierte Fehlerbeschreibung/Schadensmeldung! Wichtig: Zu verschraubende Ersatzteile werden grundstzlich ohne Verschraubungsmaterial berechnet und geliefert. Falls Bedarf an entsprechendem Verschraubungsmaterial besteht, ist dieses durch den Zusatz mit Verschraubungsmaterial bei der Ersatzteilbestellung anzugeben. Entsorgungshinweis KETTLER-Produkte sind recyclebar. Fhren Sie das Gert am Ende der Nutzungsdauer einer sachgerechten Entsorgung zu (ortliche Sammelstelle).

DE 60229750

HEINZ KETTLER GmbH & Co.KG SERVICECENTER Henry-Everling-Str. 2 D-59174 Kamen Tel.: 02307 / 974-2111 Fax: 02307 / 974-2295 E-Mail: service.sport@kettler.de KETTLER Austria GmbH Ginzkeyplatz 10 A - 5020 Salzburg Trisport AG Im Bsch 67 CH - 6331 Hnenberg

http://www.kettler.de

Assembly Instructions
Before assembling or using the exercise cycle , please read the following instructions carefully. They contain important information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a safe place for maintenance purposes or for ordering spare parts.

For Your Safety

! ATTENTION! The crosstrainer should be used only for its intended purpose, i.e. for physical exercise by adult people.
for a longer period. Ensure that the power cable is not pinched and that no-one can trip over it. All electric appliances emit electromagnetic radiation when in operation. Please do not leave especially radiation-intensive appliances (e.g. mobile telephones) directly next to the cockpit or the electronic controlsystem as otherwise values displayed might be distorted (e.g. pulse measurement). Before beginning your program of exercise, consult your doctor to ensure that you are t enough to use the equipment. Base your program of exercise on the advice given by your doctor. Incorrect or excessive exercise may damage your health! Any interference with parts of the product that are not described within the manual may cause damage, or endanger the person using this machine. Extensive repairs must only be carried out by KETTLER service staff or qualied personnel trained by KETTLER. Always observe the general safety rules and precautions for working with electrical equipment.

ATTENTION! Any other use of the equipment is prohibited and may be dangerous. The manufacturer cannot be held liable for damage or injury caused by improper use of the equipment.
Exercise has been designed in accordance with the latest standards of safety. Any features which may have been a possible cause of injury have been avoided or made as safe as possible. Incorrect repairs and structural modications (e.g. removal or replacement of original parts) may endanger the safety of the user. Damaged components may endanger your safety or reduce the lifetime of the equipment. For this reason, worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done. Use only original KETTLER spare parts. If the equipment is in regular use, check all its components thoroughly every 1 -2 months. Pay particular attention to the tightness of bolts and nuts.This applies especially to the securing bolts for saddle and handelbars. To ensure that the safety level is kept to the highest possible standard, determined by its construction, this product should be serviced regulary (once a year) by specialist retailers.
ATTENTION! Before beginning your program of training, study the instructions for training carefully.
ATTENTION! Instruct people using the equipment (in particular children) on possible sources of danger during exercising.
Our products are subject to a constant innovative quality assurance. We reserve the right to perform technical modications. In case of enquiry, please contact your KETTLER dealer. In choosing the location of the apparatus, ensure a sufcient safety distance from any obstacles. The apparatus must not be mounted in the immediate vicinity of main passageways (paths, doorways, corridors). For a comfortable training position please adjust the handlebar andsaddle position to your body height.
The device requires a supply voltage of 230V, 50 Hz. Connect the power cord with a protective contact socket. IMPORTANT! Do not under any circumstances carry out electrical repairs or alterations yourself. Always ensure that such work is done by a properly qualified electrician.
IMPORTANT! disconnect the apparatus from the mains before doing repair, maintenance or cleaning work.
Do not use a multiple power socket for the running belt. If an extension cable is being used, ensure that it complies with the VDE regulations. Unplug the power cord of the device from the socket if not used
ATTENTION! While assembly of the product keep off childrens reach (Choking hazard - contains small parts).
WARNING! Heart rate monitoring systems may be inaccurate. Over exercise may result in serious injury or death. If you feel faint stop exercising immediately.

Handling the equipment

Before using the equipment for exercise, check carefully to ensure that it has been correctly assembled. It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc.). This may cause corrosion. The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children

are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly. The exercise cycle complies with the DIN EN 957 - 1/5, class HA. Before beginning your rst training session, familiarize yourself thoroughly with all the functions and settings of the unit. A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon operation. Possibly occurring noise during reverse pedalling result from engineering and are absolutely safe.
The exercise cycle has a magnetic brake system. The equipment is independent of revolutions per minute. Please ensure that liquids or perspiration never enter the machine or the electronics. Before use, always check all screws and plug-in connections as well as respective safety devices t correctly. Always wear suitable shoes when using.
Use for your regular cleaning, maintenance and care our appliance maintenance set (Article no. 07921-000) specifically licensed for KETTLER Sports apparatus and available from the Sport specialized trade. Nobody may be in the moving range of a training person during training.
Instructions for Assembly
Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer. Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters. The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if possible technically talented. Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine. Ensure that your working area is free of possible sources of danger, for example dont leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags! The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as instructed. The required tools are supplied with the equipment. Bolt all the parts together loosely at rst, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to nally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened rmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of tubing plugs).