4-169-956-11(1)

CD/DVD Player

Reference Guide DVP-SR500H

2010 Sony Corporation

WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. The AC power cord must be changed only at a qualified service shop. Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like.
outlet, even if the player itself has been turned off. Do not install this player in a confined space, such as a bookshelf or similar unit. Install the player so that the AC power cord can be unplugged from the wall socket immediately in the event of trouble. If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about half an hour until the moisture evaporates. For customers in the U.S.A Owners Record The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. DVP-SR500H Serial No.______________
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Important Safety Instructions
1) 2) 3) 4) 5) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11)Only use attachments/ accessories specified by the manufacturer. 12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/

CAUTION

The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Precautions

To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. The player is not disconnected from the AC power source as long as it is connected to the wall
apparatus combination to avoid injury from tip-over. 13)Unplug this apparatus during lightning storms or when unused for long periods of time. 14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Note about the discs

Do not use the following discs: A disc recorded in a color system other than NTSC, such as PAL or SECAM (this player conforms to the NTSC color system). A disc that has a non-standard shape (e.g., card, heart). A disc with a label or sticker on it.

Region code

Your player has a region code printed on the back of the unit and only will play commercial DVDs (playback only) labeled with identical region codes. This system is used to protect copyrights. Commercial DVDs labeled ALL will also play on this player. Depending on the commercial DVD, there may be no region code indication, even though playing the commercial DVD is prohibited by area restrictions.

DVPXXXX X

otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. 19962008 DTS, Inc. All Rights Reserved. DVD+RW, DVD-RW, DVD+R, DVD+R DL, DVD-R, DVD VIDEO, and CD logos are trademarks. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. This DVD player incorporates High-Definition Multimedia Interface (HDMI) technology. HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. This product meets ENERGY STAR guidelines for energy efficiency. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. ENERGY STAR is a registered mark owned by the U.S. government.

About this manual

DVD may be used as a general term for commercial DVDs, DVD+RWs/DVD+Rs/DVD+R DLs (+VR mode) and DVD-RWs/ DVD-Rs/DVD-R DLs (VR mode, video mode).

00V 00Hz

0-000-000-00

Copyrights

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless

Playback

Control Menu display
Use the Control Menu to select a function and to view related information.

TIME/TEXT Checks the elapsed time and the remaining playback time. Input the time code for picture and music search (DVD only). ORIGINAL/PLAY LIST Selects the type of title (DVD-VR mode) to be played: ORIGINAL, or edited PLAY LIST. PROGRAM*1, *2 Selects the title, chapter, or track to play in the order you want. 1 Select SET t, then select the title (T), chapter (C), or track (T) you want to program. 2 Repeat selecting the title, chapter, or track. 3 Press N. SHUFFLE*1, *2 Plays the title, chapter or track in random order. REPEAT*1, *2

Press DISPLAY.

To change the Control Menu display, press DISPLAY again.

12(27) 18(34) T 1:32:55

OFF OFF SET ON

PLAY DVD VIDEO

PROGRAM Quit: DISPLAY
Plays all titles/tracks/albums or a single title/ chapter/track/album/file repeatedly. A-B REPEAT*1, *2 A Control Menu items B Currently playing title/Total number of titles C Currently playing chapter/Total number of chapters D Playing time E Selected disc type F Playback status G Selected item icon/menu options H Operation message I Selected Control Menu item Specifies the parts you want to play repeatedly. 1 During playback, select SET t, then press ENTER. The A-B REPEAT setting bar appears. 2 When you find the starting point (point A), press ENTER. 3 When you reach the ending point (point B), press ENTER again. PARENTAL CONTROL Set to prohibit playback on this player. PLAYER t: Playback of some DVD VIDEOs can be limited according to a predetermined level such as the age of the users. Scenes may be blocked or replaced with different scenes (Parental Control). PASSWORD t: Enter a 4-digit password using the number buttons. Also use this menu to change the password.

Menu list

Item Item Name, Function TITLE/SCENE/TRACK CHAPTER/INDEX TRACK Selects the title, scene, track, chapter, or index to be played.
Parental Control (limited playback)
You can set a playback limitation level. 1 Select PLAYER t, then press ENTER. Enter or re-enter your 4-digit password, then press ENTER.
2 Press X/x to select STANDARD, then press ENTER. Press X/x to select an area, then press ENTER. When you select OTHERS t, select and enter a standard code. See PARENTAL CONTROL AREA CODE LIST at the end of this manual. 3 Press X/x to select LEVEL, then press ENTER. Press X/x to select the level, then press ENTER. Parental Control setting is complete. The lower the value, the stricter the limitation. To turn off the Parental Control function, set LEVEL to OFF. If you forget your password, enter 199703 in the password box, press ENTER, and then enter a new 4-digit password. SETUP QUICK: Use Quick Setup to choose the desired language of the on-screen display, the aspect ratio of the TV and the audio output signal. CUSTOM: In addition to the Quick Setup setting, you can adjust various other settings (page 7). RESET: Returns the settings in SETUP to the default setting. ZOOM*1 Magnifies the image up to four times the original size, scroll using C/X/x/c. ANGLE Changes the angle. CUSTOM PICTURE MODE Selects the picture quality that best suits the program you are watching. STANDARD: displays a standard picture. DYNAMIC 1: produces a bold dynamic picture by increasing the picture contrast and the color intensity. DYNAMIC 2: produces a more dynamic picture than DYNAMIC 1 by further increasing the picture contrast and color intensity. CINEMA 1: enhances details in dark areas by increasing the black level. CINEMA 2: white colors become brighter and black colors become richer, and the color contrast is increased. MEMORY t: adjusts the picture in greater detail.

SHARPNESS Exaggerates the outline of the image to produce a sharper picture. OFF: cancels this option. 1: enhances the outline. 2: enhances the outline more than 1. AV SYNC Adjust the delay between the picture and sound. This function is not effective when: you use the DIGITAL OUT (COAXIAL) jack, and set DOLBY DIGITAL and DTS in AUDIO SETUP to DOLBY DIGITAL and ON respectively (page 8). you connect a Dolby Digital or DTScompliant device via the HDMI OUT jack, and set DOLBY DIGITAL and DTS in AUDIO SETUP to DOLBY DIGITAL and ON respectively (page 8). 1 Select SET t, then press ENTER. The AV SYNC adjustment bar appears. 2 Press c repeatedly to adjust the delay. Each time you press C/c, the delay is adjusted by 10 milliseconds. 3 Press ENTER. The selected setting takes effect. To reset the AV SYNC setting, press CLEAR in step 2. TVS (TV Virtual Surround) Selects surround sound effect when connecting a stereo TV or 2 front speakers. This only works when playing a multichannel Dolby audio sound track. Furthermore, if the player is set up to output the signal from the DIGITAL OUT (COAXIAL)/HDMI OUT jack, the surround effect will only be heard when DOLBY DIGITAL is set to D-PCM in AUDIO SETUP (page 8). OFF: Cancels the setting. TVS DYNAMIC THEATER/ TVS DYNAMIC/ TVS WIDE: These modes are effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TVS NIGHT: This feature is useful when you want to hear the dialog and enjoy the surround sound effects of TVS WIDE at low volume. TVS STANDARD: Use this setting when you want to use TVS with 2 separate speakers.
*1 To return to normal play, select OFF or press CLEAR. *2 The play mode is canceled when: you open the disc tray. you turn off the player.

,continued

Items for DATA discs
Item Item Name, Function ALBUM Selects the album that contains music and photo files to be played. FILE Selects the photo file to be played. ALBUM Selects the album that contains video file to be played. FILE Selects the video file to be played. DATE Displays the date the picture was taken by a digital camera. INTERVAL* Specifies the duration for which the slides are displayed on the screen. EFFECT* Selects the effects to be used for changing slides during a slide show. MODE 1: the images randomly cycle through the effects. MODE 2: the next image sweeps in from top left to bottom right. MODE 3: the image sweeps in from top to bottom. MODE 4: the image sweeps in from left to right. MODE 5: the image stretches out from the center of the screen. OFF: turns off this function. MEDIA Selects the media type you want to play. VIDEO: plays video files. PHOTO (MUSIC): plays photo and music files as a slide show. You can view a slideshow with sound when music and photo files are placed in the same album. If the playing time of either music or photos is longer, the longer one continues without sound or image. PHOTO (BGM): plays photo files with the players internal background sound. To choose the melody of the background sound, press AUDIO repeatedly while viewing the image.

MUSIC: plays music files. Press SUBTITLE while playing music files that contain unsynchronized lyric information. The player supports MP3 ID3 Lyrics only.
* Depending on the file, this function may not be possible.
To play VIDEO CDs with PBC functions
When you start playing a VIDEO CD with PBC (Playback control) functions, the menu for your selection appears.
To play without using PBC
Press./> or the number buttons while the player is stopped to select a track, then press N or ENTER. To return to PBC playback, press x twice, then press N.
To lock the disc tray (Child Lock)
You can lock the disc tray to prevent it being opened by mistake. When the player is in standby mode, press in order, O RETURN, ENTER, and [/1 on the remote. The player turns on and (LOCKED) appears on the front panel display. The Z button on the player does not work while the Child Lock is set.

To unlock the disc tray

When the player is in standby mode, press in order, O RETURN, ENTER, and [/1 on the remote again.
Controlling TVs with the remote
You can control the sound level, input source, and power switch of your Sony TV with the supplied remote. If your TV is listed in the table below, set the appropriate manufacturers code. When you replace the batteries of the remote, set the appropriate code number again.
1 While holding down TV [/1, press the number buttons to select your TVs manufacturers code. 2 Release TV [/1.
Code numbers of controllable TVs Sony 01 (default) Hitachi 02
LG/Goldstar/NEC MGA/Mitsubishi Panasonic Philips Pioneer RCA Samsung Sharp Toshiba
SCREEN SETUP TV TYPE: Selects the aspect ratio of the connected TV.
Viewing a high quality slide show (PhotoTV HD)
If you have a Sony TV that is compatible with PhotoTV HD, you can enjoy the best quality images. PhotoTV HD is activated when the player is connected to a TV by an HDMI cord and JPEG RESOLUTION in HDMI SETUP is set to PhotoTV HD (page 8).

4:3 LETTER BOX

4:3 PAN SCAN

CUSTOM Menu

You can adjust various settings. Press DISPLAY when the player is in stop mode, select (SETUP), and then select CUSTOM. The CUSTOM menu appears.
Item Item Name, Function LANGUAGE SETUP OSD (On-Screen Display): Switches the display language on the screen. MENU*1: Selects the desired language for the discs menu (DVD VIDEO only). AUDIO*1: Switches the language of the sound track. When you select ORIGINAL, the language given priority in the disc is selected. (DVD VIDEO only) SUBTITLE*1: Switches the language of the subtitle recorded on the DVD VIDEO. When you select AUDIO FOLLOW, the language for the subtitles changes according to the language you selected for the sound track. (DVD VIDEO only)
SCREEN SAVER: When set to ON, the screensaver appears when the player is in pause or stop mode for 15 minutes. Press N to turn off the screen saver. BACKGROUND: Selects the background color or picture on the TV screen. If you set JACKET PICTURE, even though the disc does not contain a jacket picture, the GRAPHICS picture appears. BLACK LEVEL: Selects the black level (setup level) for video signals output from the jacks other than COMPONENT VIDEO OUT/HDMI OUT. BLACK LEVEL (COMPONENT OUT): Selects the black level (setup level) for video signals output from the COMPONENT VIDEO OUT jacks. PROGRESSIVE (COMPONENT OUT ONLY)*2: Sets to ON if your TV aspects progressive format signals. MODE (PROGRESSIVE): This setting is effefctive only when you set PROGRESSIVE (COMPONENT OUT ONLY) to ON. AUTO detects the format either the filmbased or video-based, and converts to the appropriate version. 4:3 OUTPUT: This setting is effective only when you set TV TYPE to 16:9. Select FULL when you can change the aspect ratio on your TV. CUSTOM SETUP AUTO STANDBY: Sets the Auto Standby setting on or off. If you select ON, the player enters standby mode when left in stop mode for more than 30 minutes. AUTO PLAY: When set to ON, the player automatically starts playback when the player is turned on by a timer (not supplied).

PAUSE MODE: Selects the picture in pause mode. Normally select AUTO. When the picture is output in high resolution, set to FRAME. (DVD only) TRACK SELECTION: Gives the sound track which contains the highest number of channels priority when you play a DVD VIDEO on which multiple audio formats (PCM, DTS, or Dolby Digital format) are recorded. If you select AUTO, priority is given. (DVD VIDEO only) IMAGE QUALITY: Selects the priority display to either high quality image or quick speed. (Photo files only) MULTI-DISC RESUME: Switches the Multidisc Resume setting on or off. Resume playback can be stored in memory for up to 6 different DVD VIDEOs/VIDEO CDs. If you start the settings again, the resume point is cleared. (DVD VIDEO/VIDEO CD only) AUDIO SETUP AUDIO DRC (Dynamic Range Control)*3: Set according the surrounding environment. Set to TV MODE when the smallest sounds are indiscernible, or set to WIDE RANGE when the listening environment is good, for example, in a home movie theater. DOWNMIX*3: Switches the method for mixing down to 2 channels when you play a DVD which has rear sound elements (channels), or is recorded in Dolby Digital format. Normally select DOLBY SURROUND. DIGITAL OUT: Selects if audio signals are output via the DIGITAL OUT (COAXIAL)/ HDMI OUT jack. When you select ON, set also the following DOLBY DIGITAL, DTS, or 48kHz/96kHz PCM. DOLBY DIGITAL: Selects the type of Dolby Digital signal. Set to D-PCM when the player is connected to an audio component without a built-in Dolby Digital decoder. DTS: Selects the type of DTS audio signal. Set to ON when you play a DVD VIDEO with DTS sound tracks. Do not set to ON when you connect the player to an audio component without a DTS decoder. 48kHz/96kHz PCM: Selects the sampling frequency of the digital audio output signal. (DVD VIDEO only)
HDMI SETUP You can adjust items related to HDMI connection. HDMI RESOLUTION*2: Selects the type of video signal output from the HDMI OUT jack. If AUTO (19201080p) (default) is selected, the player outputs video signals of the highest resolution acceptable for your TV. If the picture is not clear, unnatural or otherwise not to your satisfaction, try another option that suits the disc, TV/projector, etc. For details, refer also to the instruction manual supplied with the TV/ projector, etc. You cannot select this when JPEG RESOLUTION is set to PhotoTV HD. JPEG RESOLUTION: Selects the type of JPEG resolution so that you can enjoy a high picture quality via HDMI connection. This setting is effective only when you set TV TYPE to 16:9. You cannot select this when HDMI RESOLUTION is set to 720480p. (19201080i) HD and (19201080i) HD are effective only when you set HDMI RESOLUTION to 19201080i. If you set this setting to PhotoTV HD, (19201080i) HD or (19201080i) HD, the effect, rotation, and zoom functions are not available. YCBCR/RGB (HDMI): Selects the type of HDMI signal output from the HDMI OUT jack. Set to RGB if the playback picture is distorted. You cannot select this when JPEG RESOLUTION is set to PhotoTV HD. AUDIO (HDMI): Selects the type of audio signal output from the HDMI OUT jack. Set to PCM if you connect the player to a TV that is not compatible with DOLBY DIGITAL/DTS signals.

*1 When you select OTHERS t, select and enter a language code. See LANGUAGE CODE LIST at the end of this manual. *2 If the picture does not appear normally or goes blank, reset the setting. Press [/1 to turn off, enter 369, and then press [/1 to turn on the player again. *3 This function affects the output from the following jacks: AUDIO OUT L/R jacks. DIGITAL OUT (COAXIAL)/HDMI OUT jack only when DOLBY DIGITAL is set to D-PCM.

Information

Troubleshooting
If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer.
The player does not operate properly.
c When static electricity, etc., causes the player to operate abnormally, unplug the player.
The disc tray does not open and (LOCKED) appears on the front panel display.
c Child Lock is set (page 6).
The disc tray does not open and (TRAY LOCKED) appears on the front panel display.
c Contact your Sony dealer or local authorized Sony service facility.
The power is not turned on.
c Check that the power cord is connected securely.
C13 appears on the front panel display.
c Clean the disc with a cleaning cloth or check its format.
There is no picture/picture noise appears.
c Re-connect the connecting cord securely. c The connecting cords are damaged. c Check the connection to your TV and switch the input selector on your TV so that the signal from the player appears on the TV screen. c The disc is dirty or flawed. c Press [/1 to turn off the player, and enter 369 using the number buttons on the remote, then press [/1 to turn on the player again.
C31 appears on the front panel display.
c Re-insert the disc correctly.
There is no picture/sound when connected to the HDMI OUT jack.
c Change the HDMI RESOLUTION setting in HDMI SETUP. The problem may be solved. c The equipment connected to the HDMI OUT jack does not conform to the audio signal format, in this case set AUDIO (HDMI) in HDMI SETUP to PCM. c Try the following: 1Turn the player off and on again. 2Turn the connected equipment off and on again. 3Disconnect and then connect the HDMI cord again.

There is no sound.

c Re-connect the connecting cord securely. c The connecting cord is damaged. c The player is in pause mode or in Slow-motion Play mode. c The player is in fast forward or fast reverse mode.
The remote does not function.
c The batteries in the remote are weak. c The remote is not pointed at the remote sensor on the player. c When you operate the player by pressing buttons on the remote in sequence, press the buttons within 5 seconds of each other.

Playable file format

Video: MPEG-1 (Cyber-shot data)/MPEG-4 (simple profile)* Photo: JPEG (DCF format) Music: MP3 (except for mp3PRO)/WMA (except for WMA Pro)*/AAC*/LPCM/ WAVE

* Files with copyright protection (Digital Right Management) cannot be played.

The disc does not play.

c The disc is turned over. Insert the disc with the playback side facing down. c The disc is skewed. c The player cannot play certain discs. c The region code on the DVD does not match the player. c Moisture has condensed inside the player. c The player cannot play a recorded disc that is not correctly finalized.
Supported extensions:.mpg,.mpeg,.mp4,.jpg,.mp3,.wma,.m4a,.wav Supported discs: DVD, DVDRW/R/R DL, Music CD/Super VCD, CD-R/-RW DATA CDs recorded according to ISO 9660 Level 1/Level 2, or its extended format, Joliet.
DATA DVDs recorded according to UDF. The player will play any file in the above, even if the file format differs. Playing such data may generate noise that can result in speaker damage. To play a complex hierarchy of folders may take some time. Create albums with no more than two hierarchies. Some video, photo, and music files may not play, depending on the encoding/recording condition. To start playback and proceed to the next or another album/file may take some time. The player will recognize a maximum of 200 albums and 600 files. It can recognize up to 300 music files and 300 photo files when PHOTO (MUSIC) is selected. The player may not play a combination of two or more video files. The player cannot play a video file of size more than 720 (width) 576 (height)/2 GB. Depending on the file, playback may not be smooth. You are recommended to create the file at a lower bit rate. The player may not play back the high bit rate video file on the DATA CD smoothly. You are recommended to play back using DATA DVD. When playing visual data that is not supported by MPEG-4 format, only sound will be heard.
contents the software producers designed, some playback features may not be available. Also, refer to the operating instructions supplied with the DVDs or VIDEO CDs.

Note on discs

This unit is designed to playback discs that conform to the Compact Disc (CD) standard. DualDiscs and some music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard. Therefore, these discs may not be compatible with this unit.

Specifications

System
Laser: Semiconductor laser

Outputs

AUDIO OUT (L/R): Phono jack DIGITAL OUT (COAXIAL): Phono jack COMPONENT VIDEO OUT(Y, PB, PR): Phono jack VIDEO OUT: Phono jack HDMI OUT: HDMI 19 pin-Standard Connector

General

Power requirements: 120 V AC, 60 Hz Power consumption: 10 W Dimensions (approx.): 209 mm (125/8 11/2 81/4 in.) (width/height/depth) incl. projecting parts Mass (approx.): 1.2 kg (2 lb 11 oz) Operating temperature: 5 C to 35 C (41 F to 95 F) Operating humidity: 25 % to 80 %
Note about recordable media
Some recordable media cannot be played on this player due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. The disc will not play if it has not been correctly finalized. Also some DATA discs created in Packet Write format cannot be played.

Supplied accessories

Audio/Video cord (phono plug 3 y phono plug 3) (1) Remote commander (remote) (1) Size AA (R6) batteries (2) Specifications and design are subject to change without notice.
For player that cannot play images that contain a copy protection only
Images in DVD-VR mode with CPRM (Content Protection for Recordable Media) protection may not be played.
Note on playback operations of DVDs and VIDEO CDs
Some playback operations of DVDs and VIDEO CDs may be intentionally set by software producers. Since this player plays DVDs and VIDEO CDs according to the disc

LANGUAGE CODE LIST

1 page 7
Code Language 1181 Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali; Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Code Language Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Interlingue Inupiak Indonesian Icelandic Italian Hebrew Japanese Yiddish Javanese Georgian Kazakh Greenlandic Cambodian Kannada Korean Kashmiri Kurdish Kirghiz Latin Lingala Laothian Lithuanian Latvian; Lettish 1345 Malagasy Code Language 1506 Maori Macedonian Malayalam Mongolian Moldavian Marathi Malay Maltese Burmese Nauru Nepali Dutch Norwegian Occitan (Afan)Oromo Oriya Punjabi Polish Pashto; Pushto Portuguese Quechua RhaetoRomance Kirundi Romanian Russian Kinyarwanda Sanskrit Sindhi Sangho SerboCroatian Singhalese Slovak Slovenian Code Language 1697 Samoan Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swedish Swahili Tamil Telugu Tajik Thai Tigrinya Turkmen Tagalog Setswana Tonga Turkish Tsonga Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapk Wolof Xhosa Yoruba Chinese Zulu

1703 Not specified

ISO 639: 1988 (E/F) standard

DVP-SR500H

Key Features
1080p Upscaling DVD Player
Upscaling DVD Player1 Meets ENERGY STAR standards guidelines for energy efficiency Multi-brand TV remote control Multiple format disc playback Precision Cinema Progressive technology Precision Drive 3 system PhotoTV HD3 Fast/slow playback with sound Multiple-disc resume Dolby digital output; dts coaxial digital output Key Technologies
Upscaling DVD player via HDMI connection: Upscaling DVD Player (via HDMI ; cable sold separately) makes your existing
DVDs look better on your HDTV by improving the picture quality to near high definition. 1
Meets ENERGY STAR guidelines for energy efficiency: Many home audio and video devices can use significant power, even
when turned off and in standby mode. The DVP-SR500H, however, was built for energy efficiency.
Multi-brand TV remote control: Switching back and forth between remote controls while watching television or a movie is a
hassle. The remote control included with the DVP-SR500H allows you to operate most major brands of television and this DVD player.
Multiple format disc playback: View movies and photos and listen to music using this DVD player with multiple format
playback. The DVP-SR500H supports DVD/DVD-RW/DVD-R/DVD+RW/DVD+R DL and CD-R/CD-RW discs plays WMA, AAC, LPCM, MPEG1 (Cyber-shot movie), and JPEG files.2
Precision Cinema Progressive technology: Many other DVD players detect image changes at the scan line level; the Sony
Precision Cinema Progressive system, however, detects image changes at the pixel level. The picture is more faithful to the source -whether film or video -- because special algorithms handle the different pixel behavior. The technology also employs separate algorithms to process the moving and still parts of an image, resulting in sharp backgrounds with moving objects that are virtually free from artifacts.
Precision Drive 3 system: Sony Precision Drive 3 assists in quickly correcting warping and surface layer issues on this DVDs for

smooth playback.

Photo TV HD: Bring your photos to life and enjoy highly detailed, Full HD 1920 x 1080p images with the PhotoTV HD mode. PhotoTV
HD works with select Sony cameras and this DVD player and HDMI output to fine tune sharpness, gradation, and color, displaying images that more closely match the look of printed photos.3
Fast/slow playback with sound: Fast and slow playback with sound lets you advance through scenes quickly without missing the

dialog.

Multiple-disc resume: Multiple-disc resume allows you to power on your player and return to the last scene you were watching on
up to six of your most previously watched discs without having to search.
Dolby Digital and dts coaxial digital output: The DVP-SR500H includes support for enhanced audio formats from Dolby and
dts and provides connectivity to some older receivers and televisions allowing the player to work with some audio systems. Also included is an analog audio two-channel output.
Child lock (tray lock): A child lock feature help prevents children from accessing the DVD player's tray.

Features

General

Background Graphics: Yes

Power Requirements: AC 120V, 60Hz

Hardware

Remote Control: Yes
DVD (VR Mode) Playback: Yes (without CPRM)3 DVD Playback: Yes3 Precision Cinema Progressive Technology: Yes Screen Saver: Yes SVCD Playback: Yes3 VCD Playback: Yes3 DVD+R DL Read Compatibility: Yes3 DVD+R Read Compatibility: Yes3 DVD+RW Read Compatibility: Yes3 DVD-R Read Compatibility: Yes3 DVD-RW (VR Mode) Read Compatibility: Yes (without CPRM)3 DVD-RW Read Compatibility: Yes3 JPEG Playback: Yes3 Precision Drive 3: Yes DVD-R DL Read Compatibility: Yes3
Service and Warranty Information
Limited Warranty Term: 1 Year Parts / 90 Days Labor

Weights and Measurements

Dimensions (Approx) Width: 12.6 Inches (320mm) Dimensions (Approx) Height: 1.26 Inches (32mm) Dimensions (Approx) Depth: 8.23 Inches (209mm) Weight (Approx.): 2.65 Lbs (1.2Kg) Color: Black UPC Code: 027242788381
1.Requires HDTV with HDMI connector (sold separately) and equivalent display capability. Image quality will vary. 2. DVD Media/Formats are not universally compatible. Playback depended on recording conditions. 3. This feature works only with select Sony cameras and requires a cable (sold separately) to connect the camera to your HDTV. 2010 Sony Electronics Inc. All rights reserved. Sony is a trademark of Sony. Dolby Digital logo is a registered trademark of Dolby Laboratories. All other trademarks are trademarks of their respective owners. Features and specifications are subject to change without notice. All weights and measures are approximate.

CD Playback: Yes (CD, CD-R, CD-RW)3 Dolby Digital Decoding: Yes dts Output: Yes MP3 Playback: Yes3

Convenience

HDMI Technology: Yes (Upscaling of the Video Resolution Output to approach 720p/1080i/1080p)1 Instant Replay: Yes Instant Search: Yes Multiple Disc Resume: Yes (6 Disc) On-Screen Display: Yes

Specifications

Tray Type: Single Tray Disc Capacity: 1 Energy Star Compliant: Yes
Digital-to-Analog Converter: 12 Bit, 108MHz
Digital-to-Analog Converter: 24 bit, 192 kHz

Inputs and Outputs

Coaxial Audio Digital Output(s): 1 (Rear) RCA Audio Output(s): 1 (Rear) Composite Video Output(s): 1 (Rear) Component Video (Y/Pb/Pr) Output(s): 1 (Rear) HDMI Connection Output(s): 1 (Rear)
Sony Electronics Inc. 16530 Via Esprillo San Diego, CA 92127 1.800.222.7669 www.sony.com
Please visit the Dealer Network for current information at www.sony.com/dn Last Updated: 02/13/2010