Reviews & Opinions
Independent and trusted. Read before buy Brinks BHS-3000!

Brinks BHS-3000

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Brinks BHS-3000, size: 1.2 MB
Related manuals
Brinks BHS-3000A Quick Reference

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

About Brinks BHS-3000
Here you can find all about Brinks BHS-3000 like user manual and other informations. For example: .

Brinks BHS-3000 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Brinks BHS-3000 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Brinks BHS-3000 photo ]

Video review

SPRING JAM 2010 ONEIL CTR, WITH QUES AND EDANEY "BHS".. ...

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
lazz 10:40pm on Saturday, October 2nd, 2010 
TWS batts will fail YES!!! this batt from TSW also failed in weeks, your also right that they are not worth returning, I bought TWO!
kevinxiao 11:21am on Saturday, July 24th, 2010 
Not an HTC battery! The image and text say that this is an HTC battery, but it is not. When you get the battery, it is from a company called TWS.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

This equipment must not be used on party lines or coin-operated phone lines.

Industry Canada

NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements documents. The Department does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent the degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. This Class B digital apparatus Complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Visit www.mybrinks.com or contact Brinks Customer Care at 1-800-445-0872 for information on obtaining service or repairs. Certification Number: 1140 10954A.

Table of Contents

Consumer Information....ii FCC Notice....ii Industry Canada....iii Welcome.....2 How to Avoid False Alarms...3 The Brinks Home Security System...4 Standard Equipment...4 Optional Equipment....6 Optional Features....7 The Parts of the Keypad....2 Status Display (Standard Keypad)...4 Message Window (Premium Keypad)...4 Emergency Keys....5 Using The Keypad....6 User Codes....7 Entering and Exiting....7 Designated Doors....7 Entry Delay....7 Exit Delay....7 Turning the System On....8 The Four On Modes...8 Turning the System On in Normal Mode...9 Turning the System On with Motions Turned Off Mode..9 Turning the System On with Motions Turned Off / Instant Mode..10 Turning the System On in Instant Mode..10 Turning the System On When It Is Not Ready..11 Turning the System Off....13 Turning the System Off When No Alarms Are In Progress..13 Turning the System Off and Canceling an Alarm...13 Turning the System Off Without Canceling an Alarm..14 What to Do in an Actual Emergency...14 Turning the System Off After an Alarm in Your Absence...15 System Options.....16 How to Bypass a Zone....16 How to Turn the Door Chime On or Off...17 How to View Alarm Memory...17 How to Add an Auxiliary Code....19 How to Delete an Auxiliary Code...21 System Testing....22 Siren and Transmission Test....22 Testing All Burglary Sensors...23 Testing the Smoke Detector...24 Testing the Doors and Windows Only...24 Testing With Not Ready Zones...26

at www.mybrinks.com to get more information about our Customer Move Program. 10. Take care when cooking or lighting a fire in the fireplace. Excessive smoke from these activities can cause false alarms.
The Brinks Home Security System
Standard Equipment The master control panel is housed in a metal box. It is mounted in an out-of-the-way location, such as a closet. The master control panel processes the information sent to it by the systems sensors and keypad. It also contains a battery that allows the system to operate during a power failure. When an alarm occurs, the master control panel sends a message over the telephone line to the Brinks Monitoring Center. Do not open the master control panel unless a Brinks representative instructs you to do so.

Master Control Panel

The keypad is mounted on the wall, near an entry/exit door. You can use it to turn the system on and off, and to change other system options. Keypads come in Premium and Standard styles (see pages 2 and 3.)
Keypad (Premium Style Shown)
You can also use the keypads emergency panic buttons to signal a fire, medical, or police emergency. (See page 5 for more information or review the Keypad Functions information at www.mybrinks.com.)

Door/ Window Sensors

One sensor is placed in or on the frame and body of each door or window that is protected. If the door or window is opened while the system is on, an alarm sounds. An alarm signal is sent to the Brinks Monitoring Center.
Standard Equipment This sensor is mounted on the wall, inside your home. The sensor can detect when someone is moving within its field of view. If the system is on at the time a person is detected, the system sends an alarm signal to the Brinks Monitoring Center. The siren is a small plastic box, mounted inside your home. When an alarm occurs, the siren sounds a warning, designed to frighten off intruders. The siren may also sound when you use some of the systems special features.

Motion Detector

The power transformer is plugged into an outlet near the master control panel. It provides electrical power to the system.

If you should notice that the transformer is

Power Transformer

unplugged, plug it back in immediately.
This device connects the security system to the telephone line in your home. It is located near or inside the master control panel. This makes it possible for the system to send alarm signals over the telephone lines to the Brinks Monitoring Center.

Telephone Jack

Do not remove the dialer cable from the jack unless a Brinks representative or this manual instructs you to do so. The highly visible sign and stickers warn potential intruders that your home is protected by a Brinks Home Security system. You will be provided with one sign and several stickers.
Yard Sign and Window Stickers
Optional Equipment This device detects smoke and dangerously high temperatures. It is mounted in a central location of the house, on the ceiling. Smoke/heat detectors are not available for commercial installations.

Smoke/Heat Detector

Heat Sensor
This device detects when the temperature near the sensor is dangerously high. It is mounted in a central location of the house, on the ceiling. Heat sensors are not available for commercial installations.
This small detector is mounted near any large expanse of glass (windows or doors) in your home. It identifies the sound of breaking glass.

Glass Breakage Detector

The SmartKey is a small remote-control device for the security system. The four buttons on the device can be used to turn the system on and off, and to do other specialized functions, like trigger an emergency alarm.

SmartKey

Telephone Control Module
The optional Telephone Control Module allows you to control the security system from any touch-tone telephone, whether you are at home or across the country. You can check the systems status while on vacation, or trigger an emergency alarm from your bedroom. The Telephone Control Module is also a helpful feature for visually-impaired users who may have difficulty using a traditional keypad.
Optional Features If your telephone line is cut, the optional line cut feature notifies you. If the system is on, the siren sounds. If the system is off, the keypad beeps and displays a trouble message. Because a line cut results in a loss of telephone service, this event is not reported to the Brinks Monitoring Center.

Turning the System On in Normal Mode 1. Close all of the doors and windows and make sure that the message window reads READY or the READY light is lit. (If not, see page 11.) 2. Press the ON key. The ON light begins to blink, telling you that the system is on and that the exit delay has begun. The Premium Keypad displays the number of seconds left in the exit delay. 3. Exit promptly. You must leave the building before the delay ends. The standard delay is 80 seconds. If the ON light stops blinking and is steadily lit, the exit delay has ended. If you open a door now, you will cause an alarm. Turn the system off by entering your user code, then start over.
Turning the System On with Motions Turned Off Mode 1. Close all of the doors and windows and make sure that the message window reads READY or the READY light is lit. (If not, see page 11.) 2. Press the ON key.
3. Press the MOTION OFF key. (You must press the MOTION OFF key no more than 20 seconds after you press the ON key.) The ON light blinks. The Premium Keypad reads ON, MOTION OFF. The Standard Keypads MOTION OFF and ON lights are lit.
Turning the System On with Motions Turned Off / Instant Mode 1. Close all of the doors and windows and make sure that the message window reads READY or the READY light is lit. (If not, see page 11.) 2. Press the ON key.
3. Press the MOTION OFF key.
4. Press the INSTANT key. The ON light turns on. The Premium Keypad reads ON, MOTION OFF, and INSTANT. The Standard Keypads ON, MOTION OFF and INSTANT lights are lit. Do not leave the building, or open any protected windows without first turning the system off. Turning the System On in Instant Mode 1. Close all of the doors and windows and make sure that the message window reads READY or the READY light is lit. (If not, see page 11.) 2. Press the ON key.
3. Press the INSTANT key. The ON light turns on. The Premium Keypad reads ALL ON, INSTANT. The INSTANT light of the Standard Keypad turns on. Do not leave the building, open any protected windows, or move in front of the motion detector without first turning the system off.
Turning the System On When It Is Not Ready If the system is not ready to turn on, you get a not ready message. This message could mean, for example, that one of the protected windows in your house is open. If you have a Standard Keypad, the READY light is off. If you have a Premium Keypad, the message window reads NOT READY. If you press the ON key when the system is not ready to turn on, the keypad sounds an error tone and the system does not turn on. To make the system ready to arm and it on, do the following:

Turning the System Off Without Canceling an Alarm Follow these instructions if you wish to turn off the system and report an alarm to Brinks. 1. Enter the building through a designated entry door. The Premium Keypads message window reads ALARM. The siren is sounding and the ON light is lit. 2. Enter your user code. The keypad beeps. Wait for Brinks to call. Be prepared to give the Brinks operator your code word. Do not use the telephone if you intend to cancel the alarm. If your telephone line is busy, Brinks may dispatch emergency personnel to your home, which could result in a false alarm fine. What to Do in an Actual Emergency If the security system is sounding an alarm, and there is an actual emergency in progress, do the following: 1. Leave the system on. If the emergency is a fire, quickly notify the buildings occupants and safely evacuate the building. 2. Do not use the telephone, except to call 911. If you do, Brinks personnel may not be able to contact you. If you are trying to make a telephone call while another alarm is triggered, the system will disconnect your call to send the alarm signal. If this continues, you may need to turn the system off to use the telephone. 3. If this is a medical or police emergency, wait for Brinks to call. Explain the emergency to the operator. If you do not answer the telephone, Brinks will try to contact the appropriate emergency agency, unless you have given other instructions.
Turning the System Off After an Alarm in Your Absence Follow these instructions if there was an alarm at your house while you were away and the sirens are no longer sounding. 1. Enter the building through a designated entry door. The ON light blinks. The sirens and speakers are silent. The Premium Keypad shows the numbers of the zones in alarm and its message window reads ALARM. 2. Enter your user code to turn the system off. The keypad beeps for one second. The keypad shows the numbers of the zones that were in alarm. The Premium Keypad reads ALARM MEMORY. 3. Refer to the Pop-Up Zone Card to verify the location of the zones that were in alarm.
4. To silence the keypads beeping and clear Alarm Memory, press the CANCEL key.

5. If you do not know what caused the alarm, review the systems alarm history at www.mybrinks.com or call Brinks Customer Care at 1-800-445-0872.

System Options

The system has five options: 1) bypass; 2) door chime; 3) auxiliary codes; 4) alarm memory; and 5) test. This section describes each of these five options. How to Bypass a Zone When you bypass a zone, the system ignores it. Use this whenever you want to turn the system on, but leave a particular sensor off. The bypass is automatically canceled when you turn the system off. To bypass a zone, do the following:

Press the OPTIONS key.

Press the 1 key.

Bypass ENTER ZONE #

Press the OPTIONS key until the message window reads: BYPASS, ENTER ZONE #.

BYPASS

Enter the number of the zone you wish to bypass. The keypad beeps. The READY and the BYPASS lights turn on.
2. Enter the number of the zone you wish to bypass. The keypad beeps. The message window reads READY, BYPASS. The number of the bypassed zone lights momentarily.
How to Turn the Door Chime On or Off When you turn the door chime on, the keypad beeps if a protected door or window is opened while the system is turned off. To turn the chime on or off, do the following:
Press the OPTIONS key. Press the 2 key. The ENTER CODE light blinks.

2. CHIME 3.

DOOR CHIME ENTER CODE
1. Press the OPTIONS key until the message window reads: DOOR CHIME, ENTER CODE.
Enter your code. The keypad beeps. The READY and the CHIME light turns on while the chime feature is on.
2. Enter your code. The keypad beeps. The message window reads READY, DOOR CHIME.
Note: If you turn the door chime on and the keypad does not beep, the chime feature may have been turned off at installation. Call Customer Care for assistance. How to View Alarm Memory You can use alarm memory to determine which zones were in alarm.

2. MEMORY

Press the 4 key. The ENTER CODE light blinks.

ALARM MEMORY ENTER CODE

Press the OPTIONS key until the message window reads: ALARM MEMORY, ENTER CODE.
Enter your user code. The keypad beeps. The lights of the zones that were last in alarm blink.
Enter your user code. The keypad beeps. The message window shows which zones were in alarm.
How to Add an Auxiliary Code You can assign an auxiliary user code to the members of your family, or to people who need temporary access to your home. Housekeepers, guests, and housesitters can all be given auxiliary codes. You can assign as many as 91 codes, but for your security, you should limit the number of auxiliary codes you assign, and delete any codes that are not in use. To assign an auxiliary code, do the following:

1. Press the OPTIONS key.
2. Press the 3 key. The ENTER CODE light blinks. 3. Enter the master user code. The keypad beeps. The ENTER USER # light blinks. 4. Enter the number of the user to whom you want to assign a code (1 to 91). The keypad beeps. The ENTER CODE light blinks. 5. Enter the new code. The keypad beeps.

AUX CODE

AUXILIARY CODES ENTER MASTER CODE
1. Press the OPTIONS key until the message window reads: AUXILIARY CODES, ENTER MASTER CODE.
2. Enter the master user code. The keypad beeps. The message window reads: ENTER USER #. 3. Enter the number of the user to whom you want to assign a code (1 to 91). The keypad beeps. The message window reads: ENTER NEW CODE. 4. Enter the new code. The keypad beeps.
6. Test the new code by turning the system on, then using the code to turn the system off.
5. Test the new code by turning the system on, then using the code to turn the system off.
How to Delete an Auxiliary Code If you wish to delete an auxiliary user code, do the following:
Press the OPTIONS key. AUXILIARY CODES ENTER MASTER CODE
Press the 3 key. The ENTER CODE light blinks.
Press the OPTIONS key until the message window reads: AUXILIARY CODES, ENTER MASTER CODE.
Enter the master user code. The keypad beeps. The ENTER USER # light blinks.
Enter the master user code. The keypad beeps. The message window reads: ENTER USER #.

USER NUMBER

Enter the number of the user whose code you wish to delete. The keypad beeps. The ENTER CODE light blinks.
Enter the number of the user whose code you wish to delete. The keypad beeps. The window reads: ENTER NEW CODE.
Do not enter the users code. Instead, press the CANCEL key. The keypad beeps.
Test that the code has been deleted by attempting to turn the system on and off using the deleted code.
5. Test that the code has been deleted by attempting to turn the system on and off, using the deleted code.

System Testing

You can test the components of the systemthe sirens, the telephone hook-up, and the sensorswithout causing a false alarm. This section describes how you can be sure that the system is functioning properly.
Important Notice: Test Weekly
Your Protective Service Agreement requires you to conduct these tests every week. Siren and Transmission Test This test helps to ensure that the systems siren is working properly, and that the system is able to send an alarm signal to the Brinks Monitoring Center. You will not receive a call from Brinks. To test the systems siren and transmission, do the following:
1. Press the OPTIONS key. TEST, ENTER CODE
2. Press the 5 key. The ENTER CODE light blinks. 3. Enter your code. A test signal is sent to Brinks. If it is received, the siren sounds briefly. The keypad may also beep. All zone lights blink. 4. If you do not hear the beep or blast, and the TROUBLE light turns on, the test failed. Call 1-800-445-0872.
1. Press the OPTIONS key until the message window reads: TEST, ENTER CODE.
2. Enter your code. The display reads: TEST. A test signal is sent to Brinks. If it is received, the siren sounds briefly. The keypad may also beep. 3. If you do not hear the beep or blast, and the keypad message window reads CP TROUBLE, the test failed. Call 1-800-445-0872.
Testing All Burglary Sensors This test helps to ensure that the systems burglary sensors are working properly. No alarm signal is sent to the Brinks Monitoring Center.
1. Make sure there is nothing moving near the motion detector and that the READY light is on. (If it is not, see page 26.)
1. Make sure there is nothing moving near the motion detector and that the message window reads READY. (If it does not, see page 26.) 2. Press the OPTIONS key until the message window reads DOOR CHIME.
DOOR CHIME 2. Press the 2 key. The ENTER CODE light blinks. 3. Press 2, 4. Then, press and hold the 7 key for three seconds. * 4. Open each protected door and window. Listen for the siren to blast. Close the door or window. 5. Walk in front of the motion detector. The siren blasts each time the motion detector detects your movements.
3. Press 2, 4. Then, press and hold the 7 key for three seconds.* The message window reads READY DOOR CHIME TEST. 4. Open each protected door and window. Listen for the siren to blast. Close the door or window.
Walk in front of the motion detector. The siren blasts each time the motion detector detects your movements.
6. If you do not hear the siren blast, call Brinks at 1-800-445-0872.
If you do not hear the siren blast, call Brinks at 1-800-445-0872.
7. When you have finished, press the CANCEL key.
When you have finished, press the CANCEL key.
*Note: If the system has four-digit codes, press 2,4,7, then press and hold the 0 key for three seconds. Testing the Smoke Detector The smoke detector can be tested without sending an alarm signal to Brinks Monitoring Center. Call Brinks Customer Care at 1-800-445-0872 for assistance. Do not attempt to test the smoke detector with heat, flame, or canned smoke. These methods can damage the smoke detector. Testing the Doors and Windows Only This test identifies whether the sensors on your homes protected doors and windows are operating properly. You may prefer to conduct this test if you find it distracting to hear the siren blast each time you pass the motion detector during the test. No alarm signals are sent to the Brinks Monitoring Center. To test the systems door and window sensors, follow the instructions on the next page. NOTE: If the systems chime feature is on, skip steps 2, 3, and 4 of the Standard Keypad instructions or steps 2 and 3 of the Premium Keypad instructions. When the chime feature is on, the keypad beeps if a protected door or window is opened while the system is off.

1. Close all doors and windows. Make sure that the READY light is on. (If it is not, see page 26.) 2. Press the OPTIONS key.
1. Close all doors and windows. Make sure the message window reads READY. (If it does not, see page 26.) 2. Press the OPTIONS key until the message window reads: DOOR CHIME.
3. Press the 2 key. CHIME 4. Enter your code. The READY and the CHIME lights turn on.

DOOR CHIME

3. Enter your code. The message window reads READY DOOR CHIME.

READY DOOR CHIME

5. Open each protected door and window. Listen for the keypad to beep.* 6. If you do not hear the keypad beep, note the zone number and call Customer Care at 1-800-445-0872. 7. When you have finished testing, end the test by repeating steps 2, 3, and 4.
4. Open each protected door and window, Listen for the keypad to beep.* 5. If you do not hear the keypad beep, note the zone number and call Customer Care at 1-800-445-0872.
6. When you have finished testing, end the test by repeating steps 2 and 3.
*Note: The keypad does not beep if the chime feature has been turned off by the installer.
Testing With Not Ready Zones If the system is not ready to test, the message window reads NOT READY or the READY light is off. Do the following:
1. Press the OPTIONS key. 2. Press the 7 key. READY 3. Observe which zone number is displayed. This is the zone that is not ready. 4. Refer to the Pop-Up Zone Card to verify the location of the zone. 5. If the zone is a door or window, make sure that it is securely closed. 6. If the READY light turns on, conduct the test.
1. Observe which zone number is displayed. This is the zone that is not ready.
2. Refer to the Pop-Up Zone Card to verify the location of the zone. 3. If the zone is a door or window, make sure that it is securely closed.
4. If the message window now reads READY conduct the test. 5. If the message window still reads NOT READY, call Customer Care at 1-800-445-0872 for assistance.
7. If the READY light does not turn on, call Brinks at 1-800-445-0872 for assistance.

Trouble Messages

You will get a trouble message if the system loses power, if it cannot reset the smoke detector, or if it cannot contact the monitoring center. Standard Keypad 1. If the TROUBLE light is on, press the OPTIONS key, then the 9 key. One of the keypads zone lights blinks; compare it to the table below.

Blinking Zone LED 8 Trouble Condition Low battery Communication Problem Indication Zone Trouble Indication Call Brinks Indication Component Failure Indication Siren Failure Indication Line Cut Indication (optional feature) Page 31
2. Press the OPTIONS key and the 9 key once more. One of the keypads zone lights may blink; compare it to the table below. If none of the conditions exist, the keypad returns to its normal state.
Blinking Zone LED Trouble Condition Upload/Download Failure No AC Power Indication Page 31 28
Premium Keypad 1. Observe which of the keypads icons are lit, and note any letters that may appear in the numeric display. Match the keypads message to the table below, then turn to the section listed in the tables second column for further information and instructions.
Message CALL 800-445-0872 CF TROUBLE CP TROUBLE CS TROUBLE CH TROUBLE LINE CUT LOW BATT NO AC TROUBLE (beeping) Trouble Condition Call Brinks Indication Component Failure Indication Communication Problem Indication Siren Failure Indication Upload/Download Failure Line Cut Indication (optional feature) Low Battery Indication No AC Power Indication Zone Trouble Indication Page 32
No AC Power Indication What it means: The electrical power to the system has been interrupted. Instead, the system is drawing power from its backup battery. The battery can provide power to the system for up to four hours. What to do: 1. If you have no power to your home, wait for the electrical power to be restored. Once this happens, the system automatically switches back to its electrical source. The backup battery recharges for the next 24 hours. 2. If you have power to your home, check the power transformer to ensure that it is properly plugged in. (See page 5 for more information about the power transformer.) If this solves the problem, stop. Otherwise, continue to the next step. 3. Check the breaker box. If any breakers are in the OFF position, move the breaker switch to ON. If this solves the problem, stop. Otherwise, continue to the next step. 4. Look for a ground-fault circuit interrupter (GFCI) on the outlet, or on a nearby outlet. The GFCI should look similar to the one shown in the picture. If the red reset button juts out from the outlet, push it back into place. If this solves the problem, stop. Otherwise, continue to the next step.

5. Unplug the power transformer. It may be screwed in place; if so, remove the screw. Plug a small appliance into the outlet to verify the outlet is working properly. If it is, continue to the next step. If the outlet is not working properly, contact an electrician to repair it. Use an extension cord to plug the systems power transformer into another outlet, until the faulty one is repaired. 6. If none of these steps resolve the problem, call Brinks Customer Care at 1-800445-0872.
Low Battery Indication What it means: The systems backup battery is low. If there has not been a power outage at your home recently, call Brinks Customer Care at 1-800-445-0872 for assistance. If there has been a recent power failure, follow the instructions below. What to do: 1. If you wish to silence the keypads beeping, press the CANCEL key. 2. Once power to your home is restored, wait 24 hours for the battery to recharge. 3. If the trouble condition returns after 24 hours, the battery is not recharging properly. Call Brinks Customer Care at 1-800-445-0872 for assistance. Note: if the system appears to have no power (the keypad does not light or respond to your commands), call Brinks Customer Care at 1-800-445-0872 for assistance.
Communication Problem Indication What it means: The system was unable to send an alarm or test signal to the Brinks Monitoring Center. What youll notice: The keypad beeps four times per minute. If you have a Premium Keypad, the message window reads CP TROUBLE, CALL 800-445-0872. What to do: 1. 2. To silence the keypads beeping, press the CANCEL key. Check your telephone for a dial tone. If there is no dial tone, remove the dialer cable from the telephone jack. This disconnects the system from the telephone line. It will not be able to send an alarm signal to the Brinks Monitoring Center. Check your telephone for a dial tone. If the dial tone returns, call Brinks Customer Care at 1-800-445-0872 for assistance.
If there is no dial tone, plug the dialer cable back into the telephone jack. Contact your telephone company for service. Until the telephone service is repaired, no alarm signals will be sent to Brinks. However, the system should still work within your home. For your protection, it is very important that you resolve this problem quickly.
Line Cut Indication (Optional Feature) What it means: The telephone service to the security system has been interrupted. The system cannot send an alarm signal to the Brinks Monitoring Center. What youll notice: Less than one minute after the line cut occurs, the siren sounds or the keypad beeps, depending on whether the system is on or off. What to do: 1. To silence the keypads beeping, press the CANCEL key. 2. If the siren is sounding, silence it by entering your code. 3. Check your telephone for a dial tone. If there is no telephone service, contact your telephone company. 4. If there is a dial tone, ensure that the systems telephone cable is securely plugged into the telephone jack. If it is not, plug it in.

Service the Detector Every Two Years Every two years, you should contact Brinks Customer Care to schedule a visit to service the smoke detector. During this call, Brinks does a more thorough cleaning and testing of the detector.

Setting the Clock

The numeric display of your Premium Keypad may show the time of day. You do not need to set the clock; it adjusts itself automatically every few months. However, if the time is incorrect, you can correct it by pressing and holding the 0 key for ten seconds. The keypads display goes blank for ten seconds, and then the system makes a brief telephone call to Brinks, obtains the actual time, and resets the clock. While the system is making this short call, you will not be able to use your telephone.

Clock, Premium Keypad

Emergency Evacuation Plans
An emergency evacuation plan helps to ensure that you and your family escape from your home safely in the event of a fire. Use these guidelines from the National Fire Protection Association to prepare your own emergency evacuation plan. 1. Draw up a floor plan of your building, like the one shown. Show any part of the buildingthe windows, doors, rooftopsthat can be used as an escape route.
Find at least two ways to escape from each room. One will be the door leading to the normal exit. Another may be a window that opens easily. If the window is high off the ground, you may need to install an escape ladder nearby. Identify a place outdoors where everyone is to meet after leaving the building. 2. Review the escape plan with everyone who lives in your home and practice escape procedures. 3. To increase the time you will have to escape a fire, sleep with your bedroom door closed. If you suspect a fire, touch the door. Do not open the door if it feels hot. If it does not, brace your shoulder against the door and open it slowly. Be ready to slam the door if smoke or heat rush in. Leave the building quickly and call the fire department from a neighbors telephone, or from your cellular telephone. In the event of a fire, the best way to ensure the safety of your family is to get the earliest possible warning. This is best achieved by installing fire detection equipment in all rooms and areas of the house. This includes: a smoke detector installed outside of each of the bedrooms heat or smoke detectors in the living room, dining room, kitchen, hallways, attic, furnace room, closets, utility and storage rooms, basement, and garage. This equipment should be installed in accordance with the National Fire Protection Associations Standard 72. For additional information, write: National Fire Protection Association 1 Battery March Park Quincy, MA 02269 California residents may also write: California State Fire Marshal 7171 Bowling Drive, Suite 600 Sacramento, CA 95823

3. Do I own the system? If you paid the connection fee only, Brinks owns the alarm system. If you paid the additional purchase charge, you own the system. If you purchased the system, your installation work order will show a separate Purchase Fee of usually an additional $500. 4. Will I receive a discount on my insurance for having a security system installed? Most homeowners policies offer discounts to policy holders with security systems. Contact your insurance company for more information. The Certificate of Installation that your installer provided can be used to provide proof to your insurance company that the installation took place. 5. How do I receive credit for referring another customer? If you refer a new customer to Brinks, and that customer has a Brinks Home Security system installed, you will receive one month of monitoring free. Please have the person you referred write your name and telephone number in the space provided at the bottom of their contract. Contact Brinks Customer Care at www.mybrinks.com or call 1-800-445-0872. Your account will be credited within 60 days of the installation date. 6. What taxes do I have to pay? Taxes vary from region to region. Most states require the collection of a sales tax on the equipment you purchase. Some states require an additional service tax on the installation, monitoring, and repair services you receive. Also, unless you own Protective Equipment, Brinks will bill you once a year for the property tax assessed by your local taxing authority. This tax is generally less than $15. 7. Do I pay for service calls and repairs? Repair service during the first 90 days is free of charge. After the first 90 days, we charge for labor. If you prefer, you can purchase a service plan from Brinks, to continue to receive free repairs after the first 90 days. Normal service hours are 8:00 AM to 5:00 PM, Monday through Friday. A premium rate is charged for service calls on weekends, holidays, or after hours.
Repairs and Upgrades 1. Can I make an appointment for a service call? Our service center schedules service calls for the morning or afternoon of a specific day. Morning service calls occur between 8:00 AM and 12:00 PM. Afternoon calls occur between 12:00 PM and 4:00 PM. 2. Can I have additional equipment installed at a later date? Yes, additional equipment may be installed. You will be charged for the installation and for the service call. If you choose to have the equipment installed initially, however, you will not be charged for a service call. You can learn more about the wide variety of additional equipment that is available at www.mybrinks.com. Additional Questions? If you have other questions about the system, please contact Customer Care at 1-800-445-0872 or write: Brinks Home Security Customer Care Department 8880 Esters Boulevard Irving, TX 75063 www.mybrinks.com

Warranty Information

This manual does not create any additional expressed or implied warranties.

 

Tags

EX-Z25 KM-6330 32LC25R CI-6330 Favorit S CQ-C1301 Phone DEQ-P90 GCS614A Fisheasy 2 Classic AWF12180W Cinema-ES3-100 MHC-EC79 MV35-V-007 9000MFP PRS-700 MAC G5 CR74G 1000SF EMP-1700 HTV-200XU Officejet 4315 HTC Hero SRF-M10 RS21jcsw Espio 105G DT-585NW TK-3201 Navigon 1410 TH-46PZ81E 2125 Cdma NX6315 6955 W KV2780R Ypt-310 IC-21 2063513 ML-1640 ETS II Yukon-2000 4L ML Rally 200 ROC 6306 RX-V861 RX1955 Optio X NS-ZCC18 EMX2300 DM2002X FF788 DSC-T90 T SCX-4200 KS500 TA-AV790ESD Cdmix1 AR-168D 509 Dual GT-S3653 SBV900 PRO 11 RX-E100R AQV09nsbn Nespresso FNA1 PCG-Z1RSP WA72145 Trioset Motorola V195 BT 250V EX-S100 DR-MV150B DCR-TRV285E GZ400 PX-750A Vision AX 410 SU-X901 Ryobi 132R SGH-T669B Dimage Z5 WS9632 CDX-2160 Mazda MPV 7-26 RF LS743 LE32R87 Axorol TC-WR350Z Tecra 9100 Mesuper Lexmark 5600 M51-675cmdw SPP-A60 KIP 3000 Yamaha TQ5 L1952T-BF TI-5006 II 520 S Km001 DVD-S325

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101