Telephone

Welcome

Quick start guide

Connect Install Enjoy

CD240 CD245

Whats in the box
Base station for CD240 OR

Connect

Connect the base station
1. Place the base station in a central location near the telephone line socket and electricity socket.

Handset CD245

Battery door
2. Connect the line cord and the power cable to their corresponding connectors at the back of the base station. 3. Connect the other end of the line cord and power cable to their respective sockets.
2 AAA rechargeable batteries

Power supply

Line cord*

Install

Insert rechargeable batteries and charge
Charge handset for 24 hours

Insert batteries

User manual

Guarantee

Quick Start Guide
Configure your phone (if necessary)
After charging your phone for a few minutes, a Welcome screen may appear depending on the country where you live. If the Welcome screen appears: 1. Press 2. Scroll 3. Press 1. Press
*You may find in the box the line adaptor delivered separately from the line cable. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. In multihandset packs, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries.
m to display a list of countries. : to find your country. mOK to confirm your selection.

Set date and time

WARNING Always use the cables and batteries that came with your phone.
2. 3. A validation tone is emitted and your phone is now ready for use.
m in idle mode, scroll : to CLOCK/ALARM and press mOK, press mOK to enter DATE & TIME. The last stored date is displayed. Enter the current date (DD/MM) and press mOK. The last stored time is displayed. Enter the current time (HH:MM) and press mOK to confirm.
Switch the handset On/Off
Press and hold mode. Press and hold

Make a call

Dial the number (maximum 24 digits) and press key. OR Press key to take the line and dial the number (maximum 24 digits).
e key for more than 5 seconds to switch on/off the handset in idle * key for 1 second to lock and unlock the keypad in idle mode.
Frequently asked questions
For more information, please refer to the User Manual that came with your phone. Problem

Theres no dialling tone!

Answer a call
When the phone rings, press
Keypad lock/unlock Paging

1. Press

End a call
To end a conversation, press

r key. e key.

Solution
Check the connections Charge the batteries Use the line cable provided Move closer to the base station Move the base station at least one metre away from any electrical appliances Move closer to the base station Reset your unit and restart the handset registration Check your subscription with your network operator
p key on the base station. All the registered handsets start to ring.
2. Once retrieved, press any key on the handset to end the paging.

Adjust earpiece volume

During a call, press
: to select from VOLUME 1 to VOLUME 3.
Listen to messages recorded on the answering machine (for CD245 only)

Press Press

Set the ring melody

1. Press press 2. 3.

m key in idle mode, scroll : to PERSONAL SET and press mOK, mOK to enter HANDSET TONE, scroll : to RING MELODY and press mOK. Scroll : to your desired melody to play the melody. Press mOK to set the ring melody. m key in idle mode, scroll : to PHONEBOOK and press mOK, press mOK.
o on the base station to turn on the answering machine (the LED is turned on). o again to turn off the answering machine (the LED is turned off). Press > on the base station to play phone messages (the first recorded message

will be played first).

Caller cannot hear me clearly! SEARCHING. is displayed on handset and icon is blinking! Calller number is not displayed!
r to skip the current message and play the next message. Press l to go back to the previous message (if pressed within 1 second of current
Press message playback). Press Press
A validation tone is emitted and the screen returns to previous menu.
l to replay current message (if pressed after 1 second of current message

Need help?

User Manual
Refer to the User Manual that came with your CD240/245.

playback).

Store a contact in the phonebook

mOK to enter ADD NUMBER.

v to adjust speaker volume during message playback. Press x to delete the current message.

Online help

www.philips.com/support
2. ENTER NAME is displayed on the screen. 3. Enter the name of the contact (maximum 12 characters) and press 4. Enter the number (maximum 24 digits) and press A validation tone is emitted.
Refer to your CD245 User Manual for details about the answering machine function.

Access the phonebook

2. To view the details, press
d in idle mode and scroll : to browse the phonebook. p key.