An FCC warning

This device has been tested in accordance with the limits of a class B digital device under item 15 of the FCC rules. These limits are designed to provide protection against harmful interference in commercial installation. This equipment generates, absorbs and can emit radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communication. There is however, no guarantee that interference will not occur in some situations. Should any interference occur when this device is in operation, please try one or more of the following measures. Change the location and direction of any aerial. Increase distance between the camera and the affected device. Use a different socket away from the affected device. Please contact a Samsung agent or a radio/TV engineer. This device complies with part 15 of the FCC Rules. Changes or modifications not expressly approved by the party responsible for compliance could void user's authority to operate the equipment.
This digital camera can be used for
Printing images using a dedicated printer, DPOF and PictBridge compatible printer or a DPOF-equipped photo lab. (refer to page 66~74)
Down loading image files from camera to computer. (refer to page 106)
Taking a picture. (refer to page 21)
Editing images on a PC. (refer to page 113)
Creation of a digital photo album.
Taking a favourite image and creating your own personalized calendar with it.
Recording your voice. (refer to page 23)
Recording a movie clip. (refer to page 24)
You can even create your own unique gift wrap paper by using your digital images.
Inserting images directly into any electronic document.

Manufacturer's contents

Please check that you have the correct contents before using this product. marked contents are optional.

Digital Camera

USB cable

Camera strap

User manual

Product warranty

Software CD

SD memory card

AC adapter (SAC-32, 3.3V)

2 AA Alkaline Batteries

Digimax Battery I-Pack : SNB-2312 KIT Battery charger Rechargeable battery

Digimax Battery I-Pack : SBP-1303 KIT Battery charger Rechargeable battery

AC cord

Identification of features

Front & Top

Mode dial Shutter button Speaker Flash Function lamp Mirror for self portrait Lens Microphone Viewfinder Power button

Back & Bottom

Flash indicator lamp(Red) Viewfinder Zoom W button (Thumbnail) Zoom T button (Digital zoom) +/-, DELETE button LCD button 5-function button LCD monitor Play mode button USB connection port DC input connection port Tripod socket ASM (Manual & Scene mode) button Autofocus indicator lamp(Green) Mode dial
* When using the digital zoom to take a picture, the composition of the picture may be different depending on whether you are using the LCD monitor or the viewfinder. The picture will be taken in the composition of the picture as it appears on the LCD monitor.

Side/ 5-function button

Memory card slot

Voice memo/ UP button

FLASH/ LEFT button MENU/ OK button Battery chamber cover Battery chamber
SELFTIMER/ RIGHT button MACRO / DOWN button

Mode dial

You can select the desired working mode by using the mode dial located on the top of the camera. This digital camera has 8 recording modes. These are listed below.

AUTO mode

Please select this mode for quick and easy picture taking with minimal user interaction.

PROGRAM mode

Selecting the automatic mode will configure the camera with optimal settings. You can still manually configure all functions except the iris and shutter speed.
AS mode Aperture priority/ Shutter priority mode The Aperture and Shutter can be set manually in the AS mode.

M mode

Manual mode The Aperture value, Shutter speed and various functions can be set manually in this mode.

VOICE RECORDING mode

A voice recording can be recorded for as long as the available recording time of the memory capacity allows.(Max : 1 hour) - Voice recording file type : *.wav

MOVIE CLIP mode

A movie clip can be recorded for as long as the available recording time of the memory capacity allows. - Image size : 640X480, 320X240, 160X120(user selectable) - Movie clip file type : *.avi

Using the AC power adapter (3.3V 2.0A) If you have access to a mains supply, using an AC Adapter (3.3V 2.0A) allows the camera to be used for long periods of time. Plug the adapter into the connection point (DC IN 3.3V) on the camera. Remove the batteries from the camera when using an AC adapter.
Always turn off the power before taking the AC adapter out of the mains supply. As with all mains powered devices, safety is important. Ensure that neither the camera nor adapter comes into contact with water or metallic materials. Please ensure that you use an AC adapter (3.3V 2.0A) with the correct specification for the camera. Failure to do so may affect your warranty.

Using the batteries

: If the camera does not turn on after you have inserted batteries, please check whether the batteries are inserted with the correct polarity(+/-). 1. Open the battery chamber cover by pushing in the direction of the arrow.
2. Insert the batteries taking note of the polarity (+ / -).
[Inserting the AA type battery]
[ Inserting the CR-V3 type battery ]
3. To close the battery chamber cover, push it until it clicks.
There are 3 indicators for battery condition that are displayed on the LCD monitor. Battery indicator Battery status The batteries are fully There is no battery capacity. Prepare new batteries. charged. Replace with new batteries.
Instructions on how to use the memory card
Maintenance of the memory card Be sure to format the memory card (see p. 79) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognize, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory cards performance. Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty. The memory card is an electronic precision device. Do not bend, drop or subject the memory card to any heavy impact. Do not store the memory card in an environment with strong electronic or magnetic fields, e.g. near loud speakers or TV receivers. Please do not use or store in an environment where there are extremes in temperature. Do not allow the memory card to become dirty or to come into contact with any liquid. Should this happen, clean the memory card with a soft cloth. Please keep the memory card in its case when not in use. During and after periods of extended use, you may notice that the memory card is warm. This is perfectly normal. Do not use a memory card that is used in another digital camera or memory card reader. Do not use a memory card formatted by another digital camera or memory card reader.

[ PROGRAM mode ]

How to use the AS mode ( ) The Aperture and Shutter can be set manually in this mode. Steps from 1-4 are the same as those for AUTO mode. 5. Select the AS mode by rotating the mode dial. 6. Use the ASM, Up/Down/Left/Right buttons to select Aperture Value and Shutter speed. * Please see page 39 for details on Aperture and Shutter speed setting. 7. Point the camera towards the subject and compose the image by using either the viewfinder or LCD monitor. 8. Press the shutter button to capture an image.

[ AS mode ]

How to use the M mode ( ) The Aperture and Shutter can be set manually in this mode. Steps from 1-4 are the same as those for AUTO mode. 5. Select the M mode by rotating the mode dial. 6. Use the ASM, Up/Down/Left/Right buttons to select Aperture Value and Shutter speed. * Please see page 40 for details on Aperture and Shutter speed setting. 7. Point the camera towards the subject and compose the image by using either the viewfinder or LCD monitor. 8. Press the shutter button to capture an image. * If the M mode is selected, a bar to indicate the exposure value will display on the bottom of the LCD monitor. ( )

[ M mode ]

How to use the VOICE RECORDING mode ( ) Steps from 1-4 are the same as those for AUTO mode. 5. Select the VOICE RECORDING mode by rotating the mode dial. 6. Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording time(Max : 1 hour) allows. The recording time will be displayed on the LCD monitor. Voice will still be recorded if the shutter button is released. - If you wish to stop recording, press the shutter button again. - File type : *.wav * A distance of 40cm between you and the camera (microphone) is the best distance to record sound. * The auto focus indicator lamp(Green) blinks during voice recording.

STANDBY START:SHUTTER

[ VOICE RECORDING mode ]
How to use the MOVIE CLIP mode( ) Steps from 1-4 are the same as those for AUTO mode. 5. Select the MOVIE CLIP mode by rotating the mode dial. 6. The MOVIE CLIP mode icon and available recording time will display on the LCD monitor. 7. Point the camera towards the subject and compose the image by using either the viewfinder or LCD monitor. Press the shutter button and movie clips are recorded [ MOVIE CLIP mode ] for as long as the available recording time. Movie clips will still be recorded if the shutter button is released. Recording time will display on the LCD monitor. If you wish to stop recording, press the shutter button again. Image size and type are listed below. - Image size : 640x480, 320 x 240, 160x120(Selectable) - File type : *.avi

STOP:SHUTTER REC

[ Preparing for Voice Memo ]

[ Recording Voice Memo ]

) / UP button
3. Press the shutter button and take a picture. The picture is stored on the memory card. 4. Voice memo will be recorded for ten seconds from the moment the picture is stored. In the middle of the sound recording, pressing the shutter button will stop the voice memo.
A distance of 40cm between you and the camera (microphone) is the best distance to record sound.

Macro(

) / Down button (Focusing)
While the menu is showing, press the DOWN button to move from the main menu to a submenu, or to move down the submenu cursor. When the menu is not showing, you can use the MACRO/ DOWN button to take macro pictures (within the distance range of 4-80 cm).

[ Auto focus ]

[ Macro ]
Types of focus modes and focus ranges (W: Wide, T: Tele) Focus type Focus range Auto 80cm ~ Infinity Macro ( W : 4 ~ 80cm ) T : 25 ~ 80cm
When the macro mode is selected, it is possible that camera shake will occur. If this is the case, use a tripod to eliminate this. When you take a picture within 25cm(MACRO focus), select the FLASH OFF mode.
Available focusing method, by recording mode ( O : Selectable , X : Not selectable, : Infinity focus range) Mode Auto Macro Mode Auto Macro O X O X X X O X O X X O X X O X O O O O O O O O O O O O O X

Focus lock

To focus on the subject positioned outside of the center, use the focus lock function. Using the Focus Lock 1. Ensure the subject in the center of the autofocus frame. 2. Press the SHUTTER button halfway. When the green auto lights up, it means the camera is focused on the subject. Be careful not to press the SHUTTER button all the way down to avoid taking an unwanted pictured. 3. With the SHUTTER button still pressed down only halfway, move the camera to recompose your picture as desired, and then press the SHUTTER button completely to take the picture. If you release your finger from the SHUTTER button, the focus lock function will be canceled.
[ The image to be captured ]
[ Press the SHUTTER button ] halfway and focus on the subject
[ Recompose the picture ] and fully depress the SHUTTER button

FLASH(

) / LEFT button
When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH ( ) button. Selecting the flash mode [ Selecting the Auto flash ] 1. Rotate the MODE DIAL to select a RECORDING mode with the exception of MOVIE CLIP and VOICE RECORDING modes. 2. Press the Flash button until the desired flash mode indicator displays on the LCD monitor. 3. A flash mode indicator will be displayed on the LCD monitor. Use the correct flash to suit the environment.

Flash range AUTOFOCUS ISO WIDE AUTO 0.8~3.0 TELE 0.8~2.0 WIDE 0.25~0.8 MACRO

Unit : m

TELE 0.25~0.8
Using the flash frequently will reduce the life of the batteries. Under normal operating conditions the charging time for the flash is normally within 6 seconds. If the batteries are weak, the charging time will be longer. During the continuous shot, movie clip mode, the flash function will not operate. Take photographs within the flash range. The image quality is not guaranteed if the subject is too close or highly reflective. The LCD monitor is turned off for a while after using the flash to recharge it.

FLASH (

Flash mode indicator Icon Flash mode
Description If the subject or background is dark, the camera flash will operate automatically.

Auto flash

Auto & Red eye reduction
If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the red-eye reduction function.

Fill in flash

The flash fires regardless of available light. The intensity of the flash will be controlled, according to the prevailing conditions. The brighter the background or subject is, the less intense the flash will be. The flash will operate in conjunction with a slow shutter speed in order to obtain the correct exposure. We recommend using a tripod for this function. When you take an image in a condition with poor light, the camera shake warning indicator ( ) will display on the LCD monitor. The flash does not fire. Select this mode when capturing images in a place or situation where flash photography is prohibited. When you capture an image in a poorly lit condition, the camera shake warning indicator ( ) will display on the LCD monitor.

Slow synchro

Flash off
Available flash mode, by recording mode

O O X X O

O O O O O

X X O O O

X X X O O

X O X X O

X X X X O

X X O X O

Self-timer(

) / Right button

When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Selftimer( ) button. This function is used when the photographer would also like to be in the image. Selecting the self-timer 1. Rotate the MODE DIAL to select a RECORDING mode with the exception of VOICE RECORDING mode. 2. Press the SELF-TIMER button until the desired mode indicator displays on the LCD monitor. A 2 second, 10 second or double self-timer icon appears on the LCD monitor. In Movie Clip mode, only the 10second self-timer will work. 2SEC self-timer ( ) : Pressing the shutter button will allow an interval of 2 seconds before the image is taken. 10SEC self-timer ( ) : Pressing the shutter button will allow an interval of 10 seconds before the image is taken. Double self-timer ( ) : A picture will be taken after about 10 seconds and 2 [Selecting the 10 SEC self-timer] seconds later a second picture will be taken. When using the flash, the 2-second self-timer may be delayed for longer than 2 seconds depending on the flash charge time. 3. When you press the SHUTTER button, the picture will be taken after the specified time has elapsed.

ASM button(Manual & Scene mode button)
You can use the ASM button to select the Aperture Value and Shutter speed in the Night scene mode. Using the ASM button in the Night scene mode 1. Rotate the MODE DIAL to select the NIGHT SCENE mode 2. Press the ASM button and the aperture value or shutter speed is turned green. 3. Press the UP/DOWN button to select the shutter speed. The aperture value will be changed automatically. Press the RIGHT/LEFT button to select the aperture value. The shutter speed will be changed automatically. 4. Press the ASM button again. The value you set will be saved and the mode will switch to NIGHT SCENE mode. Press the SHUTTER button to take the picture.
You can use the ASM button to select the Aperture Value and Shutter speed in the AS and M mode. Using the ASM button in the AS mode 1. Rotate the MODE DIAL to select the AS mode 2. Press the ASM button and the aperture value or shutter speed is turned green. 3. Press the UP/DOWN button to select the shutter speed(Shutter priority mode) and press the RIGHT/LEFT button to select the aperture value(Aperture priority mode). 4. Press the ASM button again. The value you set will be saved and the mode will switch to AS mode. Press the SHUTTER button to take the picture.
Using the ASM button in the M mode 1. Rotate the MODE DIAL to select the M mode 2. Press the ASM button and the aperture value or shutter speed is turned green. 3. Press the UP/DOWN/LEFT/RIGHT button to select the aperture value and shutter speed. - UP/DOWN button : selecting the shutter speed - LEFT/RIGHT button : selecting the aperture value 4. Press the ASM button again. The value you set will be saved and the mode will switch to M mode. Press the SHUTTER button to take the picture.
Aperture values and shutter speeds changed by zoom scale are listed below. Supported Aperture Values: AUTO, F2.7 ~ F11 Supported Shutter Speeds: AUTO, 1/2000 ~ 15S
Large (Press left button)

Aperture Value

Small (Press right button)

Slow (Press up button)

Shutter Speed

Fast (Press down button)

Page p.16

p.55 p.65 p.66 9
If you press the LCD button, you can check the following recording information:
SIZE: AV: TV: ISO: FLASH : DATE:
2816X2112 F2.7 1/OFF 2004/08/01
SIZE AV TV ISO FLASH DATE
: 2816X2112 : F2.7 : 1/30 : 100 : OFF : 2004/08/01
Size Aperture value Shutter speed ISO sensitivity Whether or not the flash is used. Recording date
In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions.

Thumbnail(

) / Enlargement(

) button

You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. Thumbnail display 1. While an image is displayed full screen, press the thumbnail button. 2. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected. 3. Press the 5 function button to move to a desired image. 4. To view an image separately, press the enlargement button.
Pressing the thumbnail button( )
Pressing the enlargement button( ) Highlighted image [ Normal display mode ] [ Thumbnail display mode ]
Image enlargement 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the thumbnail button will zoom back to the original full sized image. - You can tell whether the image displayed is an enlarged view by checking the image enlargement indicator shown at the bottom left of the LCD monitor. (If the image is not an enlarged view, the indicator will not be displayed.) You can also check the area of enlargement. - Movie clips and WAV files cant be enlarged. - If an image is enlarged, a loss of quality may occur.
Image size Maximum enlargement rate

2816/2272/2048/1600 X5.0

1024 X3.X2.0
The maximum enlargement rate in proportion to the image size.
Trimming : You can extract part of the image that you want and save it separately. TRIMMING? 1. Select an image that you want to enlarge and press the TRIM enlargement button. CANCEL 2. Different parts of the image can be viewed by pressing CONFIRM:OK the 5 function button. 3. Press the MENU button and a message will be displayed as shown alongside. 4. Select the submenu values by pressing the UP/DOWN button and then press the OK button. TRIM : trimmed images are saved in their last file names. CANCEL : cancels trimming. - If there is little memory space to save the trimmed image, the image can t be trimmed.

Menu tab

Main menu

Sub menu INTERVAL

Secondary menu 1, 3, 5, 10SEC ON / OFF
REPEAT START RIGHT90 LEFT90

ROTATE

180 HORIZONTAL VERTICAL 2272X1704 2048X1536 1600X1200
p. 64 UNLOCK / LOCK p. 65 UNLOCK / LOCK p. 66 ONE PIC/ALL PICS NO/ YES DEFAULT/3X5/4X6/5X7/8X10 STANDARD/INDEX/SIZE p.69 p. 66 ~ p. 68
RESIZE 1024X768 640X480 LOGO ONE PIC PROTECT ALL PICS NO DELETE ALL YES STANDARD INDEX DPOF SIZE CANCEL NO COPY YES
This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable.

Main menu IMAGES

Sub menu SELECT ALL STANDARD

Secondary menu -

Page p. 71
p. 72 p. 72 p. 73 AUTO POSTCARD 4X6
PRINT INDEX NO DPOF PRINT YES NO AUTO SET YES

8X10 A6 A4 B5

CUSTOM SET
AUTO INDEX 1 FULL LAYOUT 6 8
Menu tab Main menu Sub menu Secondary menu AUTO PLAIN TYPE PHOTO FAST PHO. AUTO DRAFT QUALITY NORMAL CUSTOM SET FINE AUTO DATE OFF ON AUTO FILE NAME OFF ON NO RESET YES Menus are subject to change without prior notice. p. 74 p. 73 Page

Starting the slide show

Images can be displayed continuously at pre-set intervals. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [SLIDE] menu tab. Setting play interval: Set the slide show play interval. 1. Use the Up/Down buttons to select the [INTERVAL] menu and press the Right button. 2. Use the Up/Down buttons to select the desired interval. 3. Press the OK button to save the configuration.
INTERVAL REPEAT START EXIT:MENU 3 SEC ON MOVE:
Repeat setting : Repeat or not the slide show after finishing the first cycle. 1. Use the Up/Down buttons to select the [REPEAT] menu and press the Right button. 2. Use the Up/Down buttons to select the desired sub menu. [OFF] Selected : The slide show is closed after one cycle. [ON] selected : The slide show is repeated until canceled. 3. Press the OK button to save the configuration. Start the slide show: The slide show can start only in the [START] menu. 1. Use the Up/Down buttons to select the [START] menu. 2. Press the OK button to start the slide show. - Press the Pause button to pause the slide show. - Press the Pause button ( ) again to resume the slide show. - Press the Menu button to stop the slide show.

NO YES

When this menu is selected without inserting a memory card, you can't select the [COPY TO CARD] sub menus. If there is not enough space available in the memory card to copy saved images in the internal memory (32MB), the [COPY TO CARD] command will copy only some of the images and display [CARD FULL!] message. Then the system will return to the playback mode. Please be sure to delete any unnecessary images to free up space before inserting the memory card into the camera.

PictBridge

You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. You can set up the following settings from the PictBridge menu.
IMAGES PRINTER SETUP PRINT DPOF AUTO PRINT RESET
: Select the pictures to be printed. : Setting up printing(AUTO SET/CUSTOM SET) : Printing pictures : Printing the DPOF files : Initializing the PictBridge functions
Connecting the Camera to a Printer 1. Press the power button to turn the camera power on. 2816 2. In a mode other than Voice Recording mode, press the SET UP MENU button. LAMP COMPUTER SOUND PRINTER 3. Press the LEFT/ RIGHT button and select [SETUP] USB menu tab. BACK: SET:OK 4. Select [USB] menu by pressing the UP/ DOWN button and press the RIGHT button. 5. Select [PRINTER] menu by pressing the UP/ DOWN button and press the OK button. 6. Press the menu button twice and the menu will disappear. 7. Use the supplied USB cable to connect the camera to the printer as shown below. 8. Turn on the printer to connect the camera to the printer.
If you selected [COMPUTER] in Step 5, when you connect the camera to your printer, the Mode dial lamp(Green) will illuminate and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 2 and onward.
PictBridge: Picture Selection
Select pictures to print 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.70) IMAGES 2. The [IMAGES] menu will appear. SELECT 3. Use the UP and DOWN buttons to select the desired ALL submenu value, and then press the OK button. MOVE: SET:OK When [SELECT] is selected : The PictBridge function will be applied only to the picture currently displayed. When [ALL] is selected : The PictBridge function will be applied to all pictures, excluding movie clips and voice files.

Setting the Number of Copies to Print - Select [SELECT] or [ALL]. A screen where you can set the number of copies to print will appear as shown below.
0 PRINTS EXIT:SH1 MOVE PIC: SET:OK EXIT:SH1

0 PRINTS

[ When [SELECT] is selected ]
[ When [ALL] is selected ]
- Press the Up/Down button to select the number of prints. Maximum 30 prints. - Use the Left/Right button to select another picture and select the number of prints for another picture. - After setting the number of prints, press the OK button to save. - Press the Shutter button to return to the menu without setting the number of prints.

PictBridge: Printing

Printing Pictures 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.70) PRINT 2. Use the LEFT and RIGHT buttons to select the [PRINT] STANDARD menu tab. INDEX 3. Use the UP and DOWN buttons to select the desired MOVE: SET:OK submenu value, and then press the OK button. [STANDARD] : Print the pictures stored in the memory card in set numbers. One picture is printed on one piece of paper. [INDEX] : Print multiple images on one sheet of paper. 4. The screen shown on the right will appear and the picture will be printed. If no picture is selected, the [NO IMAGE!] message will be displayed. Press the shutter button while printing to cancel the printing and the [IMAGES] menu is displayed. Number of pictures in a index print varies depends on the printer used.

NOW PRINTING

001/001 EXIT:SH1
DPOF PRINT : This allows you to directly print the files with DPOF information. 1. Connect the camera to your printer. The [USB] menu must be set to [PRINTER] before you connect the camera to the printer.(See p.70) DPOF PRINT NO 2. Use the LEFT and RIGHT buttons to select the [DPOF YES PRINT] menu tab. 3. Use the UP and DOWN buttons to select the desired MOVE: submenu value, and then press the OK button. [NO] : Cancel the printing [YES]: Directly print the file with the DPOF information Depending on the manufacturer and printer model, some menus may not be available. With a printer without supporting the DPOF, the menu is still displayed but not available.
PictBridge: Print Setting
AUTO SET 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.70) AUTO SET 2. Use the LEFT and RIGHT buttons to select the [AUTO NO SET] menu tab. YES 3. Use the UP and DOWN buttons to select the desired MOVE: SET:OK submenu value, and then press the OK button. [NO] : [CUSTOM SET] values are kept. [YES]: All values in the [CUSTOM SET] are automatically changed.
CUSTOM SET : You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. 1. Connect the camera to your printer. The [USB] menu must be set to [PRINTER] before you connect the camera to the printer.(See p.70) 2. Use the LEFT and RIGHT buttons to select the [CUSTOM SET] menu tab. 3. Use the UP and DOWN buttons to select the desired submenu value, and then press the RIGHT button. 4. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button. The menus you can set up are as follows: Menu SIZE LAYOUT TYPE QUALITY DATE FILE NAME Function Setting the size of the printing paper Setting the number of pictures to be printed on a sheet of paper Setting the quality of the picture to be printed Setting whether to print the date Setting whether to print the file name Sub menu AUTO, POSTCARD, 4x6, 8x10, A6, A4, B5 AUTO, INDEX, 1, FULL 2, 4, 6, 8 AUTO, DRAFT, NORMAL, FINE AUTO, OFF, ON AUTO, OFF, ON

SIZE LAYOUT TYPE BACK: AUTO
Setting the quality of the printing paper AUTO, PLAIN, PHOTO, FASTPHO.
Some menu options are not supported in all manufacturer and printer models. If the setting values are not changed in the automatic/manual setting, the setting values are automatically kept.

PictBridge : RESET

Initializes user-changed configurations. 1. Connect the camera to your printer. The [USB] menu must be set to [PRINTER] before you connect the camera to the printer.(See p.70) 2. Use the LEFT and RIGHT buttons to select the [RESET] menu tab. 3. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button. - If [NO] is selected : Settings will not be reset. - If [YES] is selected : All print and image settings will be reset.

NO YES MOVE: SET:OK

Default print setting varies depending on the printer manufacturer. For your printers default setting, refer to the users guide that came with your printer.

Setup menu

In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings.

Main menu FILE PWR SAVE

Sub menu RESET SERIES OFF, 1, 3, 5, 10MIN ENGLISH

Secondary menu ENGLISH

Page p.76 p.77

A LANGUAGE T Y P E

FRANAIS DEUTSCH ESPAOL ITALIANO PCCK DUTCH PORTU. NO
B DANSK T Y P E SVENSKA THAI MELAYU p.78

FORMAT DATE&TIME

p.79 p.80
YES 04/08/01 13:00 YY/MM/DD

DATE TYPE

DD/MM/YY MM/DD/YY DATE

IMPRINT

D & TIME OFF

ON OFF OFF LOW

MEDIUM HIGH
Menu tab Main menu USB Sub menu COMPUTER PRINTER DARK LCD NORMAL BRIGHT Q.VIEW RESET OFF, 1, 2, 3SEC YES NO p.84 p.84 p.83 Secondary menu Page p.83

File name

This function allows the user to select the file naming format. Assigning File Names 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2816 2. Press the LEFT/ RIGHT button and select the [SETUP] SETUP menu tab. FILE RESET 3. Select the [FILE] menu by pressing the UP/ DOWN button PWR SAVE SERIES LANGUAGE and press the RIGHT button. SET:OK BACK: 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. [RESET] : After using the reset function, the next file name will be set from 0001 even after formatting, deleting all or inserting a new memory card. [SERIES] : New files are named using numbers that follow the previous sequence, even when a new memory card is used, or after formatting, or after deleting all pictures 5. Press the menu button twice and the menu will disappear.

Formatting a memory card

This is used for formatting the memory card. If you run [FORMAT] on the memory card, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory card. If the memory card is not inserted, the internal memory will be formatted.
Formatting a Memory Card 2816 1. In any mode other than Voice Recording mode, press the SETUP MENU button. PWR SAVE NO 2. Press the LEFT/ RIGHT button and select the [SETUP] LANGUAGE YES menu tab. FORMAT SET:OK BACK: 3. Select the [FORMAT] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. If [NO] is selected: The memory card will not be formatted. Press the menu button twice and the menu display will disappear. If [YES] is selected: Select the [FORMAT] menu by pressing the UP/DOWN button and press the OK button. A [PLEASE WAIT!] message appears and the memory card will be formatted. If you ran FORMAT in Play mode, a [NO IMAGE!] message will appear.
Be sure to run [FORMAT] on the following types of memory card. - A new memory card, or an unformatted memory card. - A memory card that has a file this camera can t recognize or one that has been taken from another camera. Always format the memory card using this camera. If you insert a memory card that has been formatted using other cameras, memory card readers, or PCs, you will get a [CARD ERROR!] message.
Setting up the Date/ Time
You can change the date and time that will be displayed on the captured images.
Setting Date/Time 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2816 2. Press the LEFT/ RIGHT button and select the [SETUP] SETUP menu tab. LANGUAGE FORMAT 3. Select the [DATE&TIME] menu by pressing the UP/ DATE&TIME DOWN button and press the RIGHT button. SET:OK BACK: 4. Use the UP, DOWN, LEFT, and RIGHT buttons to select the desired submenu value, and then press the OK button. RIGHT button : Selects the year/month / day/hour / minute. LEFT button : Moves the cursor to the [DATE&TIME] main menu if the cursor is at the first item of the date and time setup. In all other cases, the cursor will be shifted to the left of its current position. UP and DOWN buttons : Changes the setting value. 5. Press the menu button twice and the menu will disappear.