[ PROGRAM mode ]

If the auto focus frame turns to red when you press the shutter button down half way, it means that the camera cannot focus on the subject. Should this be the case, the camera is unable to capture an image clearly.
How to use the ASR (Advanced Shake Reduction) mode ( ) Advanced Shake Reduction (ASR) mode. This mode will reduce the effect of camera shake and help you get a well-exposed image in dim conditions.

[ ASR mode ]

Things to watch out for using the ASR mode 1. The digital zoom will not operate in the ASR mode. 2. If the lighting condition is brighter than fluorescent lighting condition, the ASR will not activate. 3. If the lighting condition is darker than in fluorescent lighting condition, camera shake warning indicator ( ) will display. For best results only take pictures in situations where the camera shake warning indicator ( ) is not displayed. 4. If the subject is moving, the captured image may be blurred. 5. Avoid moving the camera while the [Capturing!] message is displayed to achieve a better result. 6. As the ASR uses the camera's digital signal processor, it may take a little longer for the camera to process and save the images. 7. The ASR function will not operate with image size. Wise Shot 2 images are taken at a time. One is taken in the Fill-In Flash mode and the other is taken in the ASR mode.
How to use the Wise Shot 1. Select the ASR mode by rotating the mode dial and press the +/- button. 2. Select Drive menu tab by pressing the Up and Down button. 3. Select the Wise shot menu by pressing the Left and Right button. And then press the OK button. 4. Press the Shutter button to capture images. - Two images are captures sequentially.
In the Wise shot, the shutter speed value shown on the LCD may be different from the real shutter speed. Wise Shot function is not available on S630.
How to use the MANUAL mode ( ) You can manually configure all functions with the aperture value and shutter speed. 1. Select the MANUAL mode by rotating the mode dial. 2. Press the + / - button and menu for the shutter speed and aperture value will display. Up / Down button : changes aperture value Left / Right button : changes shutter speed. 3. Press the + / - button twice and take an image.

[ MANUAL mode ]

How to use the SCENE mode ( ) Use the menu to easily configure optimal settings for a variety of shooting situations. 1. Select the SCENE mode by rotating the mode dial. 2. Press the menu button and select a desired scene menu.

[ SCENE mode ]

* Smaller Aperture values make the object sharp but blur the background. Larger Aperture values make both the object and background sharp. * High Shutter speeds can capture a moving object in a still image as if the object is not moving. Low Shutter speeds can capture a moving object with an active effect.

The scene modes are listed below. [Children] ( ) : To take a picture of fast moving objects, for example, children. [Landscape] ( ) : To take pictures of distant scenery. [Close up] ( ) : Close-up shooting for small objects such as plants and insects. [Text] ( ) : Use this mode to shoot a document. [Sunset] ( ) : For taking pictures of sunsets. [Dawn] ( ) : Daybreak scenes. [Backlight] ( ) : Portrait without shadows caused by backlight. [FIirework] ( ) : Firework scenes. [Beach&Snow] ( ) : For ocean, lake, beach and snowscape scenes.
Portrait, Night scene mode Select a desired mode by rotating the mode dial. - Portrait : To take a picture of a person. - Night : Use this for shooting still images at night or in other dark conditions. How to use the MOVIE CLIP mode ( ) A movie clip can be recorded for as long as the available recording time of the memory capacity allows. 1. Select the MOVIE CLIP mode by rotating the mode dial. (The MOVIE CLIP mode icon and available recording time will display on the LCD monitor.) 2. Point the camera towards the subject and compose the image by using the LCD monitor. Press the shutter button and movie clips are recorded for as long as the available recording [ MOVIE CLIP mode ] time. Movie clips will still be recorded if the shutter button is released. If you wish to stop recording, press the shutter button again. * Image size and type are listed below. - Image size : 640x480, 320x240 (Selectable) - File type : *.avi (MJPEG) The maximum file size of continuous movie clip is 2GB.

[ PORTRAIT mode ]

[ NIGHT mode ]
Recording the movie clip without voice You can record the movie clip without voice. 1. Press the Up button and the ( ) icon will display on the LCD monitor. 2. Press the shutter button and movie clip is recorded for as long as the available recording time without voice. 3. To stop the recording, press the shutter button again.

[ MOVIE CLIP mode ]

Pausing while recording a movie clip (Successive Recording) This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favourite scenes into a movie clip without having to create multiple movie clips. Using Successive Recording 1. Press the shutter button and movie clips are recorded for as long as the available recording time. Movie clips will still be recorded if the shutter button is released. 2. Press the Pause button to pause recording. Press the Pause button again to resume the recording. 3. If you wish to stop recording, press the shutter button again. How to use the VOICE RECORDING mode ( ) A voice can be recorded for as long as the available recording time (max:10hour) allows. 1. In any mode with the exception of Movie clip mode, select the VOICE RECORDING mode by pressing the Voice recording button twice. 2. Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording time (max:10hour) allows. The recording time will be displayed on the LCD monitor. Voice will still be recorded if the shutter button is released. Exit SH REC - If you wish to stop recording, press the shutter [ VOICE RECORDING mode ] button again. - File type : *.wav * A distance of 40cm between you and the camera (microphone) is the best distance to record sound.

Voice recording (

) / Voice memo (

) / UP button

Macro (

) / Down button

While the menu is showing, press the UP button to move up the sub menu. When the menu is not displayed on the LCD monitor, the UP button operates as the voice recording or voice memo button. You can add your voice-over to a stored still image. Refer to page 19 for more information about the voice recording. Recording a voice memo 1. Rotate the MODE DIAL to select a RECORDING mode with the exception of MOVIE CLIP mode. 2. Press the VOICE MEMO ( ) button. If the voice memo indicator is displayed on the LCD monitor, the setting is completed.
While the menu is showing, press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu. When the menu is not showing, you can use the MACRO / DOWN button to take macro pictures. The distance ranges are shown below. Press the Macro button until the desired macro mode indicator displays on the LCD monitor.

[ Normal-No icon ]

[ Macro (

[ Auto Macro (

Types of focus modes and focus ranges (W : Wide, T : Tele) Mode
(Unit : cm) ) Normal W : 80~Infinity T : 80~Infinity

Auto ( )

) Normal W : 80~Infinity T : 80~Infinity
Program ( Macro ( W : 5~80 T : 40~80 )
Focus Type Auto Macro ( Focus W : 5~Infinity T : 40~Infinity
[ Preparing for Voice Memo ]
3. Press the shutter button and take a picture. The picture is stored on the memory card. 4. Voice memo will be recorded for ten seconds from the moment the picture is stored. In the middle of the sound recording, pressing the shutter button will stop the voice memo.
When the macro mode is selected, it is possible that camera shake will occur. Take care not to shake the camera. When you take a picture within 20cm in the Macro mode, select the FLASH OFF mode.
A distance of 40cm between you and the camera (microphone) is the best distance to record sound.

Focus lock

To focus on a subject not positioned in the centre of the picture, use the focus lock function. Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Press the SHUTTER button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject. Be careful not to press the SHUTTER button all the way down to avoid taking an unwanted picture. 3. With the SHUTTER button still pressed down only halfway, move the camera to recompose your picture as desired, and then press the SHUTTER button completely to take the picture. If you release your finger from the SHUTTER button, the focus lock function will be cancelled.

Available focusing method, by recording mode (O: Selectable , X: Not selectable, : Infinity focus range) Mode Normal Macro Auto Macro Mode Normal Macro Auto Macro Mode Normal Macro Auto Macro X X O X X X X O X X O X X X X O X O O O X O X X O O X SCENE O X X O X X O O X

X X -

1. The image to be captured.
2. Press the SHUTTER button halfway and focus on the subject.
3. Recompose the picture and fully press the SHUTTER button.

Flash (

) / Left button
Using the flash frequently will reduce the life of the battery. Under normal operating conditions the charging time for the flash is normally within 5 seconds. If the battery is weak, the charging time will be longer. During the continuous shot, AEB, some scene modes (p.26) and movie clip mode, the flash function will not operate. Take photographs within the flash range. The image quality is not guaranteed if the subject is too close or highly reflective. When taking an image in poorly lit conditions with the flash, there may be a white speck in the captured image. The speck is caused by the reflecting of the flash light from the atmospheric dust. It is not camera malfuction.
When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH ( ) button.
[ Selecting the Auto flash ]
Selecting the flash mode 1. Rotate the MODE DIAL to select a RECORDING mode with the exception of Movie clip mode. 2. Press the Flash button until the desired flash mode indicator displays on the LCD monitor. 3. A flash mode indicator will be displayed on the LCD monitor. Use the correct flash to suit the environment.
Flash range ISO AUTO Normal WIDE 0.8~3.0 TELE 0.8~2.5 Macro WIDE 0.3~0.8 TELE 0.4~0.8
(Unit : m) Auto macro WIDE 0.3~3.0 TELE 0.4~2.5
Flash mode indicator Icon Flash mode Auto flash Auto & Red eye reduction
Available flash mode, by recording mode Description If the subject or background is dark, the camera flash will operate automatically. If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the red-eye reduction function. The flash fires regardless of available light. The intensity of the flash will be controlled, according to the prevailing conditions. The brighter the background or subject is, the less intense the flash will be. X X X X O O O X X O O O O O O X X X X O X X O X O X O X X O X X X O O (O : Selectable X : Not selectable)

Scene modes

Fill in flash

X X X X O

X X O X X

O X X X X

The flash will operate in conjunction with a slow shutter speed in order to obtain the correct exposure. When you take an image in a condition with poor Slow synchro light, the camera shake warning indicator ( ) will display on the LCD monitor. We recommend using a tripod for this function. The flash does not fire. Select this mode when capturing images in a place or situation where flash photography is prohibited. When you capture an image in a poorly lit condition, the camera shake warning indicator ( ) will display on the LCD monitor. We recommend using a tripod for this function.

Flash off

Self-timer (

) / Right button

If you operate the Self-timer and Play mode button during the self-timer operation, the self-timer function is cancelled. Use a tripod to prevent the camera from shaking.
When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-timer ( ) button. This function is used when the photographer would also like to be in the image. Selecting the self-timer 1. Rotate the MODE DIAL to select a RECORDING mode with the exception of VOICE RECORDING mode. 2. Press the SELF-TIMER button until the desired mode indicator displays on the LCD monitor. A 10 second, 2 second or double self-timer icon appears on the LCD monitor. In Movie Clip mode, only the 10-second self-timer will work. 2SEC self-timer ( ) : Pressing the shutter button will allow an interval of 2 seconds before the image is taken. 10SEC self-timer ( ) [ Selecting the 2 SEC self-timer ] : Pressing the shutter button will allow an interval of 10 seconds before the image is taken. ) Double self-timer ( : A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. When using the flash, the 2-second self-timer may be delayed for longer than 2 seconds depending on the flash charge time. 3. When you press the SHUTTER button, the picture will be taken after the specified time has elapsed.

MENU / OK button

MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed for MOVIE CLIP and STILL IMAGE. There is no menu available when the VOICE RECORDING mode is selected.

Recording

Sharpness Contrast Auto Focus OSD Info
Normal Normal Center AF Full
Pressing the MENU button [ Menu off ]

MEMU Exit

[ Menu on ]

OK button - When the menu is displayed on the LCD monitor, this button is used for shifting the cursor to the sub menu or for confirming data.
Using the LCD monitor to set the camera settings
You can use the menu on the LCD monitor to set up recording functions. In any mode with the exception of VOICE RECORDING mode, pressing the MENU button displays the menu on the LCD monitor. The menu will not be displayed on the LCD monitor in the following circumstances: - When another button is being operated. - While image data is being processed. - When there is no battery capacity. The following functions are available, depending on the mode you have selected. The items indicated by are default settings. Mode Menu Sub menu Soft+ Soft Sharpness Normal Vivid Vivid+ High Contrast RECORDING Auto Focus Normal Low Center AF Multi AF Full OSD Info Basic 28 p.31 Off p.31 AF Sound On p.32 p.30 Beep Sound p.30 SOUND Shutter Sound Camera working mode Page Mode Menu Sub menu Off Volume Low Medium High Off Start Sound Sound 1 Sound 2 Sound 3 Off Sound 1 Sound 2 Sound 3 Off Sound 1 Sound 2 Sound 3 p.32 p.32 p.32 p.32 Camera working mode Page
Menu tab Main menu File Reset ENGLISH DEUTSCH ESPAOL Sub menu Series FRANAIS ITALIANO Power Off Language DANSK PORTUGUS SVENSKA BAHASA POLSKI SETUP1 Date&Time 07/01/01 YYMMDD DDMMYY Imprint Off Date&Time LCD AF Lamp Start Image Dark Bright Off Off User Image 13:00 Off MMDDYY Date Normal On LOGO p.34 p.34 p.34 p.34 p.33 The menus are subject to change without prior notice for upgrading the camera functions. Magyar DUTCH SUOMI p.33 Page p.33 Menu tab Main menu Quick View Off 1sec Off 3min 10min SETUP 2 LCD Save Video Out Format Reset Battery Type Off NTSC No No Alkaline Sub menu 0.5sec 3sec 1min 5min On PAL Yes Yes Ni-MH p.35 p.36 p.36 p.37 p.37 p.35 Page p.35

How to use the menu

1. Turn on the camera and press the MENU button. A menu for each camera mode appears. However, there is no menu for Voice Recording mode ( ). 2. Use the LEFT and RIGHT buttons to navigate through the menus.

Recording (

[ Sharpness ]
Press the LEFT or RIGHT button.
Volume Start Shutter Beep AF Sound
Normal Off Sound1 Sound1 On
File Language Date&Time Imprint LCD AF Lamp MEMU Exit
Series ENGLISH 07/01/01 Off Normal On Move

It is possible to add special effects to your images by using this button. Still image mode : You can select the colour, image editing and Fun menu. Movie clip mode : You can select the colour menu. Available Effects, by recording mode (O : Selectable X : Not selectable)
All camera menu and function settings will be restored to their default values. However, values for DATE/ TIME, LANGUAGE, and VIDEO OUT will not be changed. Sub menus [No] : Settings will not be restored to their defaults. [Yes] : All settings will be restored to their defaults.
[ Selecting a battery type ]
If a battery type is selected, the camera will be optimized according to the selected battery type. [Battery Type] sub Menu : Alkaline / Ni-MH
SETUP2 Power Off LCD Save Video Out Format Reset Battery Type Back
This button will not operate in ASR, Voice recording mode and some scene modes (Night, Text, Sunset, Dawn, Backligh, Fireworks, Beach&Snow). If a menu among the colour, image editing and Fun menu, any previously selected effect is cancelled automatically. Even if the camera is turned off, the effect setting will be preserved. To cancel the special effect, select sub menu in the Colour menu and select the sub menu in the rest effect menus.

Alkaline Ni-MH OK Set

Special Effect (E button) : Colour
By using the cameras digital processor, it is possible to add special effects to your images 1. Press the E button in an available recording mode. 2. Select the menu tab by pressing the Left/ Right button. Custom colour : You can change the R (Red), G (Green) and B (Blue) values of the image.

Custom Color

- Up / Down button : Selects R, G, B - Left / Right button : Changes the values

[ Still image mode ]

[ Movie clip mode ]

Move OK Set

3. Select a desired sub menu by pressing the Up/ Down button and press the OK button. : No effect is added to the image : Captured images will be stored in black and white. : Captured images will be stored in a sepia tone (a gradient of yellowish brown colours). : Captured images will be stored in a red tone. : Captured images will be stored in a green tone. : Captured images will be stored in a blue tone. : Save the image in negative mode. : Captured image will be saved in set RGB tone. 4. Press the shutter button to capture an image.
Special Effect (E button) : Image editing
Saturation You can change the saturation of the image. Press the E button in an available mode ( ,
Special Effect (E button) : FUN
Preset focus frames You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. Press the E button in an available mode ( , , , , , ).

You can select the image size appropriate for your application. - S730 Still image mode Movie clip mode Icon Size Icon Size 3072X 2304 640X480 3072X 2048 3072X 1728 320X240 2592X 1944 2048X 1536 1024X 768 -

SIZE 3072X2304

QUALITY Fine
- S630 Still image mode Movie clip mode Icon Size Icon Size 2816x 2112 640X480 2784X 1856 320X240 2816X 1584 2048X 1536 1024X 768 -
3. Select a desired menu by pressing the Left / Right button and then press the OK button.

00:00:10

Left / Right button

SIZE 3072X2048

SIZE 640X480

[ STILL IMAGE mode ]

The higher the resolution, the lower the number of shots available because high resolution images require more memory. 44

Quality / Frame rate

You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. Mode Icon Sub menu File Format

Metering

If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. - [Multi] : Exposure will be calculated based on an 6 average of the available light in the image area. However, the calculation will be biased towards the centre of the image METERING area. This is suitable for general use. - [Spot] : Only the rectangular area in the centre of Multi the LCD monitor will be metered for light. [ PROGRAM mode ] This is suitable when the subject in the centre is exposed correctly, regardless of the back lighting. If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, it is better to use exposure compensation.
STILL IMAGE mode Super Fine jpeg Fine jpeg Normal jpeg
MOVIE CLIP mode 30FPS avi 15FPS avi

FRAME RATE 30fps

This file format complies with the DCF (Design rule for Camera File system). JPEG (Joint Photographic Experts Group) : JPEG is the image compression standard developed by the Joint Photographic Experts Group. This type of compression is most commonly used for compressing photos and graphics because it can compress the files efficiently.

Continuous shot

You can select continuous shot, and AEB (Auto Exposure Bracketing).
6 - [Single] : Take one picture only. - [Wise Shot] : 2 images are taken at a time. One is taken in the Fill-In Flash mode and the other is taken in the DRIVE ASR mode. Single - [Continuous] : Images will be taken continuously until the shutter button is released. [ PROGRAM mode ] The shooting capacity depends on the memory. - [AEB] : Take three pictures in a series in different exposures: standard exposure (0.0EV), short exposure (-1/3EV) and over exposure (+1/3EV).

Add Noise

Contrast control : You can change the contrast of image. 1. Select by pressing the Up / Down button and a bar for selecting the contrast will display. 2. Change the contrast by pressing the Left / Right button. 3. Press the OK button and the image will be saved as a new file name.

OK Contrast Set E Back

FUN menus can be selected in the following conditions: S730 - 7M, 6M, 3M , 1M image size / S630 - 6M, 3M, 1M image size Cartoon You can add a text box on the image to make the image as a cartoon.

Cartoon

Select Cartoon (
Cartoon frame will display
Frame OK Set Frame OK Set
Select a desired frame by pressing the Left / Right button.

OK button

100-0054
Press the OK button twice
OK Select E Back Move OK Set
Change the location of the text box by pressing the Left / Right button.
Select a location of the text box by pressing the 5 function button. And the press the OK button.
Select an image by pressing the 5 function button and press the OK button

100-0055

Select a location of image (Up / Down / Left / Right button) and text box (Left / Right button) by pressing the 5 function button and press the OK button twice to save the changed image as a new file name 59
Before saving the cartoon image, you can change the selected image 1. Pressing the +/- button deletes the image in order. 2. Press the OK button and you can select images. Preset focus frames You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus.

HighLight

Pressing the +/- button
OK Search +/Delete OK Search +/Delete t ove M
3. After selecting desired images, press the OK button to save the image as a new file name. The size of Cartoon image is fixed to 1M.
Select a desired frame by pressing the Left / Right button and press the OK button.
Moving and changing the focus frame You can change the focus frame after selecting a Range menu. 1. Select a focus frame by pressing the Left / Right button and press the OK button. 2. Move the location of the frame by pressing the 5 function button. 3. Press the OK button and the file saves as a new file name. Composite image You can combine 2 - 4 different shots in a still image.

t SH Exit OK

Set SH Exit OK Set

Set the number of pictures to be Auto, Full, 1, 2, 4, 8, 9, 16, Index printed on a sheet of paper Set the quality of the printing Auto, Plain, Photo, FastPhoto paper Set the quality of the picture to be printed Set whether to print the date Auto, Draft, Normal, Fine Auto, Off, On Auto, Off, On
[When [One Pic] is selected]
[When [All Pics] is selected]
- Press the Up / Down button to select the number of prints. - When [One Pic] is selected : Use the Left / Right button to select another picture. After selecting another picture, select the number of prints for another picture. - After setting the number of prints, press the OK button to save. - Press the Shutter button to return to the menu without setting the number of prints. 4. Press the Print button ( ) and images will be printed.
Set whether to print the file File Name name
Some menu options are not supported on all printers. If not supported, the menus are still displayed in the LCD, but are not selectable.

PictBridge : Reset

Initialises user-changed configurations. 1. Use the Up / Down buttons to select the [Reset] menu tab. And then press the Right button. 2. Use the Up / Down buttons to select the desired sub menu value, and then press the OK button. If [Yes] is selected : All print and image settings will be reset. If [No] is selected : Settings will not be reset.

Important notes

Be sure to observe the following precautions! This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials. Do not leave this camera in places subject to dust, chemicals (like naphthalene and mothball), high temperature and high humidity. Keep this camera with silica gel in a hermetically sealed box when not planning to use the camera for a long period of time Sand can be particularly troublesome to cameras. - Do not let sand get inside the camera when using it on beaches, coastal dunes, or other areas where there is lots of sand. - Doing so may result in failure or may permanently render the camera unusable. Handling the camera - Never drop the camera or subject it to severe shocks or vibrations. - Protect the large size LCD monitor from an impact. When this camera is not used, keep it in the camera case. - Avoid obstructing the lens or the flash when you capture an image. - This camera is not waterproof. To avoid dangerous electrical shocks, never hold or operate the camera with wet hands. - If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit. 77

Colour of image is different to the original scene White balance or effect setting is incorrect Select appropriate White balance and effect Images are too bright Exposure is excessive Reset exposure compensation No image on external monitor The external monitor has not been connected properly with the camera Check the connection cables There are incorrect files in the memory card Insert a memory card that has correct files When using the PCs explorer, the [Removable Disk] file does not show Cable connection is incorrect Check the connection The camera is off Turn the camera on The operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 10.3. Alternatively the PC does not support USB Install Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 - 10.3 to PC that supports USB The camera driver is not installed Install a [USB Storage Driver]

Specifications

Image Sensor - Type : 1/2.5" CCD - Effective Pixel : S730-Approx. 7.2 Mega-pixel S630-Approx. 6.0 Mega-pixel - Total Pixel : S730-Approx. 7.4 Mega-pixel S630-Approx. 6.1 Mega-pixel Lens - Focal Length : SHD Lens f = 5.8 ~ 17.4mm (35mm film equivalent : 35~105mm) - F No. : F2.8 ~ F7.1(Wide), F4.9 ~ F12.4 (Tele) - Digital Zoom :Still Image mode : 1.0X ~ 5.0X Play mode : S730: 1.0X ~ 12.0X (depends on image size) S630: 1.0X ~ 11.0X (depends on image size) LCD Monitor : 2.5" color TFT LCD (S730:230K dots, S630:150K dots) Focusing - Type : TTL auto focus - Range Normal Wide Tele 80cm ~ infinity Macro 5 ~ 80cm 40 ~ 80cm Auto Macro 5cm~ Infinity 40cm~ Infinity
Shutter - Shutter Speed : 1 ~ 1/1,500 sec. (Manual : 8 ~ 1/1,500 sec.)
Exposure - Control : Program AE Metering : Multi, Spot - Compensation : 2EV (1/3EV steps) - ISO Equivalent : S730-Auto, 80, 100, 200, 400, 800, 1000 S630-Auto, 80, 100, 200, 400 Flash - Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off - Range : Wide : 0.2m ~ 3.0m, Tele : 0.4m ~ 2.5m (ISO AUTO) - Recharging Time : Approx. 5 sec. Sharpness : Soft+, Soft, Normal, Vivid, Vivid+ Color Effect : Normal, B&W, Sepia, Red, Green, Blue, Negative, User Set White Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom Voice Recording : Voice Recording (max.10 hours) Voice Memo in Still Image (max. 10 sec.) Date Imprinting : Date, Date & Time, Off (user selectable) Shooting - Still Image :Modes : Auto, Program, ASR, M, Scene Scene : Night, Portrait, Landscape, Text, Children, Close-up, Sunset, Dawn, Backlight, Fireworks, Beach & Snow Shooting : Single, Continuous, AEB, Wise Shot (S730 only) Self-timer : 2 sec.,10 sec., Double (10 sec., 2 sec.) - Movie Clip :With Audio or without Audio (user selectable, recording time : memory capacity dependent) The maximum file size of continuous movie clip is 2GB. Size : 640X480, 320X240 Frame rate : 30 fps, 15 fps Optical zoom: Max. 3X Storage - Media :Internal memory : Approx.16MB flash memory External memory : MMC / SD card (Up to 2GB Guaranteed) SDHC card (Up to 4GB Guaranteed) Some cards are not compatible according to the memory card manufacturer and memory card type. - File Format : Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0 Movie Clip : AVI (MJPEG) Audio : WAV - Image Size S730

3072X 2304 S630

3072X 2048

3072X 1728

2592X 1944

2048X 1536

1024X 768
2816X 2112 2784X 1856 2816X 1584 2048X 1536 1024X 768 -
- Capacity (256 MB MMC) S730 Interface - Digital output connector : USB 2.0 High Speed - Audio : Mono - Video output : NTSC, PAL (user selectable) 822 Power Source - Primary Battery : 2 x AA Alkaline - Rechargeable battery (0ptional) : SNB-2512B KIT (2xAA 2500mAh Ni-MH Battery & Charger) Included battery may vary depending on sales region. Dimensions (WxHxD): 99.8x 62.8x25.7mm (excluding protrusions) Super Fine Fine Normal 822 Weight : Approx. 136g (without batteries and card) Operating Temperature : 0 ~ 40 C Operating Humidity : 5 ~ 85% These figures are measured under Samsungs standard conditions and may vary depending on shooting conditions and camera settings. E Button - Effect : Color, Image Adjust, Fun (Highlight, Composite ,Photo Frame) - Editing : Resize, Rotate, Color, Special Color, Image Adjust (Brightness, Contrast, Saturation, Add Noise), Fun (Cartoon, Highlight, Composite, Photo Frame, Sticker) Image Play - Single image, Thumbnails, Slide show, Movie Clip Software : Digimax Master, Adobe Reader Specifications are subject to change without prior notice. All trademarks are the property of their respective owners.
Super Fine Fine Normal S630

Software Notes

Please ensure that you read the instruction manual carefully before use. The attached software is a camera driver and image editing software tool for Windows. Under no circumstances should all or part of either the software or the user manual be reproduced. Copyrights for software are licensed only for use with a camera. In the unlikely event of a manufacturing fault, we will repair or exchange your camera. We cannot, however, be held responsible in any way for damage caused by inappropriate use. Using a Hand-made PC or a PC and OS that has not been guaranteed by the manufacturer is not covered by the Samsung warranty. Before reading this manual, you should have a basic knowledge of computers and O/S (Operating Systems).

About the software

After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. Screen Captures illustrated on this manual is based on English Edition of Windows. This manual is based on model SAMSUNG S730. Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader. After installing the driver and connecting this camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My computer]. A USB Storage Driver is provided only for Windows. A USB Driver for MAC is not included with the Application CD. You can use the camera with Mac OS 9.2 ~ 10.3. Digimax Master : This is the all-in-one multi media software solution. You can download, view, edit and save your digital images and movie clips clip with this software. This software is only compatible with Windows.

Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products. The Eco mark represents Samsung Techwin's will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive.
Declaration of Conformity Trade Name : SAMSUNG TECHWIN Model No. : SAMSUNG S730/630 Responsible Party : Samsung Opto-Electronics America, INC. Address : 40 Seaview Dr. Secaucus,NJ 07094 Telephone No. : 201-902-0347 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 95
SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086, 8088, 8090, 8092, 8099 FAX : (82) 31-740-8398 www.samsungcamera.com SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : (1) 201-902-0347 FAX : (1) 201-902-9342 WESTERN REGIONAL OFFICE 18600 BROADWICK ST., RANCHO DOMINGUEZ, CA 90220, U.S.A. TEL : (1) 310-900-5284/5285 FAX : (1) 310-537-1566 www.samsungcamerausa.com
SAMSUNG FRANCE S.A.S. BP 51 TOUR MAINE MONTPARNASSE 33, AV.DU MAINE 75755, PARIS CEDEX 15, FRANCE HOTLINE PHOTO NUMRIQUE : 37 27(Numro Vert-Appel Gratuit) TEL : (33) 1-4279-2200 FAX : (33) 1-4320-4510 www.samsungphoto.fr SAMSUNG OPTO-ELECTRONICS GMBH AM KRONBERGER HANG 6 D-65824 SCHWALBACH/TS., GERMANY TEL : 49 (0) FAX : 49 (0) www.samsungcamera.de TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD No.9 zhangheng Street. Micro-Electronic Industrial Park Jingang Road Tianjin China. POST CODE : 300385 TEL : (86) 22-2761-4599 FAX : (86) 22-2769-7558 www.samsungcamera.com.cn
SAMSUNG OPTO-ELECTRONICS UK LIMITED SAMSUNG HOUSE 1000 HILLSWOOD DRIVE HILLSWOOD BUSINESS PARK CHERTSEY KT16 OPS U.K. TEL : (free for calls from UK only) UK Service Hotline : 01932455320 www.samsungcamera.co.uk RUSSIA INFORMATION CENTER SAMSUNG ELECTRONICS 117545 ST. DOROZHNAYA BUILDING 3, KORPUS 6, ENTRANCE 2, MOSCOW, RUSSIA TEL : (7) 495-363-1700 CALL FREE : (8) (from Russia only) www.samsungcamera.ru
Internet address - http : //www.samsungcamera.com The CE Mark is a Directive conformity mark of the European Community (EC)

6806-3639