INFORMATION

Important information about battery usage When the camera is not used, turn off the camera power. Please remove the battery if the camera will not be used for long periods. Battery can lose power over time and are prone to leaking if kept inside the camera. Low temperatures (below 0C) can affect the performance of the battery and you may experience reduced battery life. Batteries will usually recover at normal temperatures. During extended use of the camera, the camera body may become warm. This is perfectly normal. It is easy to buy alkaline batteries. However, the duration for using batteries varies in accordance with the battery manufacturer or the photographic conditions Do not use manganese batteries as manganese batteries cannot deliver sufficient power.
Insert the battery as shown - If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ / -). - When the battery chamber cover is opened, do not press the battery chamber cover by force. This may cause damage to the battery chamber cover.
Inserting the memory card
Insert the memory card as shown. - Turn off the cameras power before inserting the memory card. - Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor). - Do not insert the memory card the wrong way round. Doing so may damage the memory card slot.
There are 4 indicators for battery condition that are displayed on the LCD monitor. Battery indicator Low battery Low battery Low battery capacity capacity (Prepare capacity (Prepare to to recharge (Prepare to or use spare recharge or use recharge or use battery) spare battery) spare battery)

Battery status

The battery is fully charged
Instructions on how to use the memory card
Be sure to format the memory card (see p.36) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory cards performance. Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty. The memory card is an electronic precision device. Do not bend, drop or subject the memory card to any heavy impact. Do not store the memory card in an environment with strong electronic or magnetic fields, e.g. near loud speakers or TV receivers. Please do not use or store in an environment where there are extremes in temperature. Do not allow the memory card to become dirty or to come into contact with any liquid. Should this happen, clean the memory card with a soft cloth. Please keep the memory card in its case when not in use. During and after periods of extended use, you may notice that the memory card is warm. This is perfectly normal. Do not use a memory card that is used in another digital camera. To use the memory card in this camera, format the memory card using this camera. Do not use a memory card formatted by another digital camera or memory card reader. If the memory card is subjected to any of the following, the recorded data may become corrupted : - When the memory card is used incorrectly. - If the power is switched off or the memory card is removed while recording, deleting (formatting) or reading. Samsung cannot be held responsible for lost data. It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard disks, CD etc. If there is insufficient memory available : A [Memory Full!] message will appear and the camera will not operate. To optimise the amount of memory in the camera, replace the memory card or delete unnecessary images stored on the memory card.

[ PROGRAM mode ]

If the auto focus frame turns to red when you press the shutter button down half way, it means that the camera cannot focus on the subject. Should this be the case, the camera is unable to capture an image clearly.
How to use the ASR (Advanced Shake Reduction) mode ( ) Advanced Shake Reduction (ASR) mode. This mode will reduce the effect of camera shake and help you get a well-exposed image in dim conditions.

[ ASR mode ]

Things to watch out for using the ASR mode 1. The digital zoom will not operate in the ASR mode. 2. If the lighting condition is brighter than fluorescent lighting condition, the ASR will not activate. 3. If the lighting condition is darker than in fluorescent lighting condition, camera shake warning indicator ( ) will display. For best results only take pictures in situations where the camera shake warning indicator ( ) is not displayed. 4. If the subject is moving, the captured image may be blurred. 5. Avoid moving the camera while the [Capturing!] message is displayed to achieve a better result. 6. As the ASR uses the camera's digital signal processor, it may take a little longer for the camera to process and save the images. 7. The ASR function will not operate with image size. Wise Shot 2 images are taken at a time. One is taken in the Fill-In Flash mode and the other is taken in the ASR mode.
How to use the Wise Shot 1. Select the ASR mode by rotating the mode dial and press the +/- button. 2. Select Drive menu tab by pressing the Up and Down button. 3. Select the Wise shot menu by pressing the Left and Right button. And then press the OK button. 4. Press the Shutter button to capture images. - Two images are captures sequentially.
In the Wise shot, the shutter speed value shown on the LCD may be different from the real shutter speed. Wise Shot function is not available on S630.
How to use the MANUAL mode ( ) You can manually configure all functions with the aperture value and shutter speed. 1. Select the MANUAL mode by rotating the mode dial. 2. Press the + / - button and menu for the shutter speed and aperture value will display. Up / Down button : changes aperture value Left / Right button : changes shutter speed. 3. Press the + / - button twice and take an image.

Pressing the ZOOM W button

[ Optical zoom 2X ]

Digital zoom WIDE

Optical zoom

Digital zoom
: When the digital zoom is in operation, pressing the ZOOM W button will reduce the digital zooming in steps. Releasing ZOOM W button stops digital zooming. Pressing the ZOOM W button will reduce the digital zoom and then it will continue to reduce the optical zoom until the minimum setting is reached.

Voice recording (

) / Voice memo (

) / UP button

Macro (

) / Down button

While the menu is showing, press the UP button to move up the sub menu. When the menu is not displayed on the LCD monitor, the UP button operates as the voice recording or voice memo button. You can add your voice-over to a stored still image. Refer to page 19 for more information about the voice recording. Recording a voice memo 1. Rotate the MODE DIAL to select a RECORDING mode with the exception of MOVIE CLIP mode. 2. Press the VOICE MEMO ( ) button. If the voice memo indicator is displayed on the LCD monitor, the setting is completed.
While the menu is showing, press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu. When the menu is not showing, you can use the MACRO / DOWN button to take macro pictures. The distance ranges are shown below. Press the Macro button until the desired macro mode indicator displays on the LCD monitor.

[ Normal-No icon ]

[ Macro (

[ Auto Macro (

Types of focus modes and focus ranges (W : Wide, T : Tele) Mode
(Unit : cm) ) Normal W : 80~Infinity T : 80~Infinity

Auto ( )

) Normal W : 80~Infinity T : 80~Infinity
Program ( Macro ( W : 5~80 T : 40~80 )
Focus Type Auto Macro ( Focus W : 5~Infinity T : 40~Infinity
[ Preparing for Voice Memo ]
3. Press the shutter button and take a picture. The picture is stored on the memory card. 4. Voice memo will be recorded for ten seconds from the moment the picture is stored. In the middle of the sound recording, pressing the shutter button will stop the voice memo.
When the macro mode is selected, it is possible that camera shake will occur. Take care not to shake the camera. When you take a picture within 20cm in the Macro mode, select the FLASH OFF mode.
A distance of 40cm between you and the camera (microphone) is the best distance to record sound.

Focus lock

To focus on a subject not positioned in the centre of the picture, use the focus lock function. Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Press the SHUTTER button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject. Be careful not to press the SHUTTER button all the way down to avoid taking an unwanted picture. 3. With the SHUTTER button still pressed down only halfway, move the camera to recompose your picture as desired, and then press the SHUTTER button completely to take the picture. If you release your finger from the SHUTTER button, the focus lock function will be cancelled.

[ AF sound ]

Off Sound 1 Sound Sound
If you set AF sound to ON, AF sound will be activated when a subject is focused so that you can be aware of the camera operation status. [AF sound] sub menu: [Off], [On]

Off On

[ Shutter sound ]
You can select the shutter sound.
Shutter sound : [Off], [Sound 1], [Sound 2], [Sound 3]
Off Sound 1 Sound Sound 3 OK Set

Setup 1 (

[ File name ]

[ Language ]

There is a choice of languages that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved.

Reset Series

This function allows the user to select the file naming format. Assigning File Names [Reset] : After using the reset function, the next file name will be set from 0001 even after formatting, deleting all or inserting a new memory card. [Series] : New files are named using numbers that follow the previous sequence, even when a new memory card is used, or after formatting, or after deleting all pictures.
File Language Date&Time Imprint LCD Back
- LANGUAGE sub menu : English, Korean, French, German, Spanish, Italian, S.Chinese, T.Chinese, Japanese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai, BAHASA(MALAY/ INDONESIAN), Arabic, Czech, Polish, Hungarian and Turkish.
File Language Date&Time Imprint LCD AF Lamp Back
- The first stored folder name is 100SSCAM, and the first file name is S7300001 (The file name of S630 is S6300001). - File names are assigned sequentially from S7300001 S7300002 ~ S7309999. - The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM 101SSCAM ~ 999SSCAM. - The files used with the memory card conform to the DCF (Design rule for Camera File systems) format. If you change the image file name, the image may not play back.
[ Setting up the Date/ Time/ Date type ]
You can change the date and time that will be displayed on the captured images and set up the date type. Setting Date/ Time & Selecting Date Format SETUP1 RIGHT button : Selects the year/ month/ day/ File 07/01/01 hour/ minute date type. Date&Time LEFT button : Moves the cursor to the 13:00 Imprint LCD [Date&Time] main menu if the yy/mm/dd AF Lamp cursor is at the first item of the OK Set Back date and time setup. In all other cases, the cursor will be shifted to the left of its current position. UP and DOWN buttons : Changes the setting value - Date type : [yy/mm/dd], [Off], [dd/mm/yy], [mm/dd/yy]

SETUP2

- After replacing the battery, the power off setting will be preserved. - Note that the automatic power off function will not operate if the camera is in PC / Printer mode, slide show, playing back a voice recording, playing back a movie clip.
Quick View Power Off LCD Save Video Out Format Reset Back
Off 1 min 3 min 5 min 10 min OK Set
[ Selecting Video out type ]

[ Formatting a memory ]

This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. Sub menus [No] : The memory will not be formatted. Press the menu button three times and the menu display will disappear. [Yes] : A [Processing!] message appears and the memory will be formatted. If you run FORMAT in Play mode, a [No Image!] message will appear.
The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. Connecting to an external monitor When the camera is connected to an external monitor in the recording mode or play back mode, the image (movie or still image) will be visible on the external monitor and the LCD monitor of the camera turns off.

NTSC PAL

No Yes
Yellow - Video White - sound
Be sure to run [Format] on the following types of memory card. - A new memory card, or an unformatted memory card - A memory card that has a file this camera can't recognise or one that has been taken from another camera. - Always format the memory card using this camera. If you insert a memory card that has been formatted using other cameras, memory card readers, or PCs, you will get a [Card Error!] message.

[ Initialisation ]

E (Effect) button
It is possible to add special effects to your images by using this button. Still image mode : You can select the colour, image editing and Fun menu. Movie clip mode : You can select the colour menu. It can be set for resolutions of 3M or below for S630 model. Available Effects, by recording mode (O : Selectable X : Not selectable)

Special Effect (E button) : Image editing
Saturation You can change the saturation of the image. Press the E button in an available mode ( ,
Special Effect (E button) : FUN
Preset focus frames You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. Press the E button in an available mode ( , , , , , ).

IMAGE ADJUST

FUN Move E Exit

HIGHLIGHT

Select Saturation menu ( the saturation will display.

SATURATION

) and a bar for changing

Move E Exit Range OK Set

Bar for changing the saturation
Select a proper menu by pressing the Left / Right button and press the OK button.
Change the saturation by pressing the Left / Right button.
Range OK Set Range OK Set Range OK Set Range OK Set
+ direction : High saturation (The colour will be deep) - direction : Low saturation (The colur will be tender)

[Range 1]

[Range 2]

[Range 3]

[Range 4]
The preset focus frame will appear. Press the shutter button to capture an image.
Press the OK button and the saturation of image will be changed. Press the Shutter button to take a picture.

SH Capture

+/- Edit
Moving and changing the focus frame You can change the focus frame after selecting a Range menu. 1. Point the camera towards the subject and compose the image by using the LCD monitor. 2. Press the + / - button. 3. The colour of focus frame turns white. Press the Up / Down / Left / Right button to move the focus frame position. 4. Press the shutter button half way down and the camera is ready for taking a picture. To take an image, press the shutter button.
Move E Exit Composite OK Set
Composite shooting You can combine 2 - 4 different shots in a still image. Press the E button in an available mode ( , , , , , ).

Composite

Pressing the + / - button
Select a desired menu by pressing the Left / Right button and press the OK button.

SH Capture Move

[ The frame is activated ]
Pressing the Up / Down / Left / Right button
Pressing the Shutter button
You can use the flash button, self-timer button, macro button, voice memo button and the Zoom W / T button during the composite shooting. If you press the Play mode button during the composite shots, the Playbac mode is executed. The images captured before will be deleted. After taking the last composite shooting, press the OK button. And then the voice memo will start.

Quality Metering Shooting ISO White Balance EV
*1. S750/S730/S73 only *2. Shooting menus can not be selected in some scene modes (
The selected photo frame will display. Press the shutter button to take a picture.
How to use the + / - menu 1. Press the + / - button in an available mode 2. Select a desired menu by pressing the Up / Down button. And then a sub menu will display on the left bottom side of the LCD monitor.
You can select the image size appropriate for your application. - S750/S730/S73 Still image mode Movie clip mode Icon Size Icon Size 3072X 2304 640X480 3072X 2048 3072X 1728 320X240 2592X 1944 2048X 1536 1024X 768 -

SIZE 3072X2304

QUALITY Fine
- S630 Still image mode Movie clip mode Icon Size Icon Size 2816x 2112 640X480 2784X 1856 320X240 2816X 1584 2048X 1536 1024X 768 -
3. Select a desired menu by pressing the Left / Right button and then press the OK button.

00:00:10

Left / Right button

SIZE 3072X2048

SIZE 640X480

[ STILL IMAGE mode ]

The higher the resolution, the lower the number of shots available because high resolution images require more memory. 44

Quality / Frame rate

You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. Mode Icon Sub menu File Format

Metering

If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. - [Multi] : Exposure will be calculated based on an 6 average of the available light in the image area. However, the calculation will be biased towards the centre of the image METERING area. This is suitable for general use. - [Spot] : Only the rectangular area in the centre of Multi the LCD monitor will be metered for light. [ PROGRAM mode ] This is suitable when the subject in the centre is exposed correctly, regardless of the back lighting. If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, it is better to use exposure compensation.
STILL IMAGE mode Super Fine jpeg Fine jpeg Normal jpeg
MOVIE CLIP mode 30FPS avi 15FPS avi

FRAME RATE 30fps

This file format complies with the DCF (Design rule for Camera File system). JPEG (Joint Photographic Experts Group) : JPEG is the image compression standard developed by the Joint Photographic Experts Group. This type of compression is most commonly used for compressing photos and graphics because it can compress the files efficiently.

SH Stop
If there is little memory space to save the trimmed image, the image cant be trimmed.

Play & Pause (

5. The ( ) icon will be displayed on the LCD monitor after voice memo recording has finished. - Voice memos cant be recorded onto movie clip and voice recording files. - A distance of 40cm between you and the camera (microphone) is the best distance to record sound. - The voice memo will be saved in.wav format, but has the same file name as the still image to which it corresponds. - If you add a new voice memo to the still image that already has a voice memo, the existing voice memo will be erased.
In Play mode, the play & pause/ down button works as follows: - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor. - If a still image with a voice memo, a voice file, or a movie clip is playing In Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip. During playback : Temporarily stops playback. In Pause mode : Resumes playback

00 : 00 : 11

OK Stop
[ Voice recording is stopped ]
[ Voice recording is playing ]
[ Voice recording is paused ]
Special Effect (E button) : Resize
Change the resolution (size) of pictures taken. Select the [User Image] ( ) to save an image to be the start-up image. The resized image will have a new file name. 1. Press the play mode button and press the E button. 2. Press the LEFT/ RIGHT button and select the [RESIZE] ( ) menu tab. 3. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. - S630

RESIZE

X O X X X

O X X O X

O X X O O

Move E Exit

A large sized image can be resized to a smaller sized image, but not vice versa. Image Resize Types - S750/S730/S73 Only JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files cant be resized. You can change the resolution of only those files compressed in the JPEG 4:2:2 format. O X X X X X X O X X X X O X X O X X X X O X X X X O X X X X X X O X X X O X X O O X O X X O O O The resized image will have a new file name. The [User Image] image is stored not on the memory card but on the internal memory. If a new user image is saved, user image saved before will be deleted. If the memory capacity is insufficient to store the resized image, a [Memory Full!] message will display on the LCD monitor and the resized image will not be stored.
Special Effect (E button) : Rotating an image
You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. 1. Press the play mode button and press the E button. 2. Press the LEFT / RIGHT button and select the [ROTATE] ( ) menu tab. 3. Select a desired sub menu by pressing the UP / DOWN button.

Right 90 Left 90

It is possible to add special effects to your images by using this button. 1. Press the play mode button and press the E button. 2. Select menu tab by pressing the Left / Right button.

Press the OK button to save the image
The size of sticker added image is fixed to 1M. 64

Delete (

- Deleting multi-image T button : checks to delete the image Left / Right button : select deleted image After selecting images, press the OK button.
This deletes images stored on the memory. Deleting Images in Play Mode 1. Select an image that you want to delete by pressing the LEFT / RIGHT button and press the DELETE ( ) button.
2. A message will display as shown alongside on the LCD monitor.

Delete?

No Yes Prev
T T Select OK Confirm Select OK

Delete

- Deleting displayed image Select a desired menu by pressing the Up / Down button and press the OK button. If [No] is selected : cancels the deletion If [Yes] is selected : deletes the displayed image
If [No] is selected : cancels the deletion If [Yes] is selected : selected images are deleted

T Select OK

Confirm

Printer (

Deleting Images in Thumbnail Display Mode 1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want to delete, and then press the DELETE ( ) button. 2. A message will display on the LCD monitor as shown below. 3. Select the sub menu values by pressing the LEFT/ RIGHT button and then press the OK button. If [No] is selected : cancels "Delete Image". If [Yes] is selected : deletes the selected images.
You can print images with this button after connecting the camera to a PictBridge printer.

Press the Delete button

Before deleting images from the camera, you should protect or download images to your computer that you wish to keep.
Left / Right / Menu / OK button
LEFT / RIGHT / MENU / OK buttons activate the following. - LEFT button : While the menu is showing, press the LEFT button to select the menu tab to the left of the cursor. While the menu is not showing, press the LEFT button to select the previous image.
Setting up the play back function using the LCD monitor
PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button.
- RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab to the right of the cursor, or to move to a secondary menu. While the menu is not showing, press the RIGHT button to select the next image. - MENU button : When you press the MENU button, the play mode menu will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - OK button : When the menu is displayed on the LCD monitor, the OK button is used for confirming data that is changed by using the 5 function button.

Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory card.
DPOF DPOF(Digital Print Order Format) allows you to embed printing information on your memory cards MISC folder. Select the pictures to be printed and how many prints to make. The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs. This function is not available for Movie clips and Voice recording files. When the wide angle image is printed as a wide angle print, 8% of the left and right side of the image may not be printed. Check that your printer can support the wide angle image when you print the image. When you print the image at a photo lab, request that the image is printed as a wide angle image. (Some photo labs may not support the wide angle size print.)

Select Delete

Delete All?
Index : Images (except for movie clips and voice file) are printed as index type. 1. Press the Up / Down button and select the PLAYBACK [DPOF] menu tab. And then press the Right Standard Index button. Size 2. Press the Right button again and [Index] sub menu will dispaly. 3. Select a desired sub menu by pressing the UP / Back DOWN button. If [No] is selected : Cancel the index print setting. If [Yes] is selected : The image will be printed in index format. 4. Press the OK button to confirm the setting.
Standard : This function allows you to embed printing quantity information on a stored image. 1. Press the Up / Down button and select the [DPOF] menu tab. And then press the Right button. 2. Press the Right button again and [Standard] sub menu will display. 3. Select a desired sub menu by pressing the Up / Down button and press the OK button. [Select] : Selection window for an image to print is displayed. - Up / Down / Left / Right : Select an image to print. - Zoom W / T Button : Select the number of prints. [All Pics] : Configure number of prints for all pictures except movie and voice files. - W / T button : Select a number of prints [Cancel] : Cancel the print setup. 4. Press the OK button to confirm the setting. If an image carries DPOF instructions, the DPOF indicator ( ) will show.

Standard Index Size

Select All Pics Cancel

Images

Starting PC mode

If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". In this mode, you can download stored images to your PC through the USB cable. The LCD monitor is always turned off in PC mode. Connecting the camera to a PC
Camera settings for connection 1. Turn on the camera 2. Connect the camera and computer with the supplied USB cable. 3. Turn on the computer. The camera and computer are connected. 4. External device selection menu will display on the LCD monitor. 5. Select the [Computer] by pressing the Up / Down button and press the OK button.
If you selected [Printer] in Step 5, when you connect the camera to your computer, the [Connecting Printer] message will display and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 2 and onward.
Disconnecting the camera and PC : Refer to page 89 (Removing the removable disk).
Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk DCIM 100SSCAM]. The image files will then be displayed. 6. Press the right mouse button and a pop-up menu will open. Click [Paste].
7. An image file is transferred from the camera to your PC.
3. Select an image and press the right mouse button. - By using [Digimax Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files.

CAUTION

4. A pop-up menu will open. Click the [Cut] or [Copy] menu. - [Cut] : cuts a selected file. - [Copy] : copies files. We recommend that you should copy the images to the PC to view them. Opening images directly from the removable disk may be subject to unexpected disconnection. When you upload a file that is not taken by this camera to the Removable Disk, the [File Error!] message will be displayed on the LCD monitor in the PLAY mode, and nothing is displayed in THUMBNAIL mode.
5. Click a folder where you want to paste the file. 88

Removing the removable disk
Windows 98/98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. Windows 2000/ME/XP (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Double-click the [Unplug or Eject Hardware] icon on the task bar.

[Double-click!]

5. A [Safe to Remove Hardware] window will open. Click the [OK] button. 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely.

7. Unplug the USB cable.

3. The [Unplug or Eject Hardware] window will open. Select the [USB Mass Storage Device] and click the [Stop] button.
4. The [Stop a Hardware device] window will open. Select the [USB Mass Storage Device] and click the [OK] button.
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 9.2 ~ 10.3. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon will be displayed on the desktop after connecting the camera to the MAC.
Removing the USB Driver for Windows 98SE
To remove the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn them on. 2. Check whether the Removable Disk is on the [My Computer]. 3. Remove the [Samsung Digital Camera] on the Device manager.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be displayed. 2. Select an image file and copy or move it to MAC.
For Mac OS 10.0 or later : First complete uploading from computer to camera and then remove the removable disk with the Extract command.
4. Disconnect the USB cable. 5. Remove the [Samsung USB Driver] on the Add/Remove Programs Properties.
6. Uninstallation is complete. 90

Digimax Master

You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows except for the Windows 98. To start the program, click [Start Digimax Master]. Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will display after connecting the camera to your PC. - To download the captured images, select the [Select All] button. - Select desired folder in the window and click the [Select All] button. You can save captured images and selected folder. - If you click the [Cancel] button, downloading will be cancelled. Programs Samsung Digimax Master 4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded. - Folder name will be made as you want and images will be downloaded. - After selecting a folder that was made before, images will be downloaded. 5. Click [Next >] button. 6. A window will open as shown alongside. The destination of the selected folder will be displayed on the upper side of the window. Click the [Start] button to download the images.

Case 7

In some security programs (Norton Anti Virus, V3, etc.), the computer may not recognise the camera as a removable disk. Stop the security programs and connect the camera to the computer. Refer to the security program instructions about how to temporarily disable the program.

Case 8

The camera is connected to the USB port located on the front of the computer. When the camera is connected to the USB port located on the front of the computer, the computer may not recognise the camera. Connect the camera to the USB port located on the back of the computer.
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC notice

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION : Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment.

2010 Seal Hi-Rise Peace Pole Dedication
The cake and some of the spread
<KENOX S730 / Samsung S730>
Where the peace pole will be located
Attendees waiting for the ceremony to start

Attendees and the garden

Photos around the pole

More photos by the pole