ATLANTIS 250

Marine technology in the palm of your hand.
ATLANTIS 250 - HANDHELD MARINE TWO-WAY RADIO
The Uniden Atlantis 250 features all NOAA emergency weather channels, as well as all USA, International and Canadian marine channels. It also comes ready for an optional speaker microphone and meets JIS4 waterproof standards. Uniden Atlantis 250, the power to go anywhere.
1 watt/5 watt switchable for optimal battery power conservation Comes with powerful NiMH battery and is also alkaline battery capable
NOAA emergency weather Alert Backlit LCD display and buttons for enhanced night vision Covered by Uniden's 3 year water protection warranty

> >

All USA, International and Canadian marine channels Meets JIS4 waterproof standards

ATLANTIS 250 BK

Uniden advanced marine technology. www.uniden.com

> > >

HANDHELD MARINE VHF TWO-WAY RADIO
Full 5 watts setting for maximum range when you need it and 1 watt lower power, maximizing battery life, when you don't Optional speaker/microphone NOAA emergency weather alert
Includes Uniden's 3 year water protection warranty
Handheld portable VHF marine radio lets you enjoy freedom and mobility
All USA, International and Canadian marine channels
Backlit LCD and keys for easy use, day or night Triple Watch/Programmable Scan means you never miss a call
NiMH rechargeable battery with alkaline battery capability
JIS4 waterproof rated and designed to protect against spray and splash
CHANNELS WEATHER CHANNELS CONTROLS All USA, Canada and International 10 Volume & Power On/Off Knob, Squelch Knob, Ch Up/Down, Ch 16/Ch 9 or Triple Watch, 1 or 5 Watt, Keypad Lock, Push to Talk, UIC, Mem, Scan, Weather Alert, All NOAA WX Channels, SAME FIPS Channel readout, Battery Strength Indicator, Lock, 1W/5W, USA/INT/CAN, Triple Watch, TX, Mem, Scan, WX Alert, WX Backlit LCD SMA Type (Female) 2.5" (W) x 3.75" (H) x 1.125" (D) 9.2 oz. with Battery 12V DC Plug and AC Adapter (Included) 1.0W -20C to +50C (-4F to +122F) Meets or Exceeds EIA Standards, RS152B and RS204C NiMH Rechargeable Battery / 1200 mAH (included) 6AA Alkaline Battery Tray (Included) 6AA Alkaline Battery (Optional) 7.2v NiMH 1Watt or 5Watt (Switch Selectable) FM5 KHz Deviation (FCC Designator F3E) Less than 3% with 3 KHz Deviation with 1KHz Modulating Frequency 45dB at 3 KHz -60 dB at 1 Watt, -65 dB at 5 Watts 1.0 ppm, nominal 156 to 164 MHz 0.25V for 12 dB SINAD 0.35V for 20 dB S/N Dual Conversion Super Heterodyne PLL 0.2V Threshold 60 dB 65 dB at 25 KHz 1.0 Watt (10% Distortion) into a 4 Load
STATUS INDICATORS CHANNEL DISPLAY CONNECTORS SIZE WEIGHT SUPPLY VOLTAGE ANTENNA IMPEDANCE SPEAKER OPERATING TEMPERATURE RANGE SHOCK AND VIBRATION POWER SOURCE
BATTERY INPUT VOLTAGE POWER OUTPUT MODULATION AUDIO DISTORTION SIGNAL-TO-NOISE SPURIOUS SUPPRESSION FREQUENCY STABILITY FREQUENCY RANGE SENSITIVITY CIRCUIT SQUELCH SPURIOUS RESPONSE ADJACENT CHANNEL SELECTIVITY AUDIO OUTPUT POWER

www.uniden.com

Contains additional foreign articles. Custom manufactured in China. Uniden recycles for a cleaner environment 2004 Uniden America Corporation, Fort Worth, TX. All Rights Reserved.

www.uniden.com

Contents
Controls and Indicators... 2 Warning!.... 4 Introduction... 5 Features... 5 Technical Support and Service... 6 Maritime Radio Services Operation.. 6 Included in Your Package... 7 Getting Started... 8 Mounting the Cradle... 8 Attaching the Antenna... 8 Attaching the Rechargeable Battery Pack.. 8 Using the Alkaline Battery Case.. 9 Attaching the Beltclip.. 9 Charging the Battery Pack... 10 Operation... 11 Turning On the Unit and Setting Squelch.. 11 Selecting a Channel... 12 One-touch Channel 16/9/TRI.. 12 Triple Watch... 13 Monitoring Weather Channels... 14 Emergency/Weather Alert.. 15 USA, International and Canadian Channels.. 16 Programming a Channel into Memory.. 16 Deleting a Channel from Memory.. 17 Scanning... 17 Transmitting... 18 Lighted Keys and Display... 18 Turning and reactivating the Key Beep.. 18 Battery Indicator.... 19 Key Lock... 19 Marine Channels - USA.. 20 Marine Channels - International.. 22 Marine Channels - Canada.. 24 Optional Parts and Replacement Accessories.. 26 Specifications... 27 Troubleshooting... 28 FCC RF EXPOSURE INFORMATION... 29 Three-Year Limited Warranty... 30

Controls and Indicators

ATLANTIS 0

16/9 TRI

LOCK MIC
Antenna Belt Clip Adapter Jack Battery Battery Release Clip PTT (Push to Talk) Key USA/International/Canadian Button (UIC) WX Mode/Weather Alert Button (WX/ALERT) TX Power/Lock Button (1/5W/LOCK) Microphone Speaker MIC (Optional) Jack Volume/Power Knob (VOL) Squelch Knob (SQ) LCD Display Memory Button (MEM) Scan Button (SCAN) Channel Up Button (L) 16/9 - Triple Watch Button (16/9/TRI) Channel Down Button (M) Speaker

LCD Display

A B C E F D

A B C D E F G H I J K

Transmit Indicator TX Power Indicator USA/International/Canadian (US/INT/CAN) Indicator Channel Number Display Memory Indicator Scan Indicator Battery Indicator Triple Watch Indicator Weather Mode Indicator Weather Alert Indicator Key Lock Indicator

Warning!

The ATLANTIS 250 is waterproof only when both the antenna and the battery are properly attached. Do not operate the transmitter of any radio equipment unless all the Radio Frequency (RF) connectors are secure and any open connectors are properly terminated. Do not operate the transmitter of any radio equipment near electrical blasting caps or in an explosive atmosphere. Do not let children operate any transmitter-equipped radio equipment without proper supervision. Have your radio equipment serviced by a qualified technician. Do not operate the transmitter of any radio equipment with the antenna touching or close to the eyes, face, or exposed body parts.
Ni-MH Battery Pack Warning
This equipment contains a Ni-MH Battery Pack. The Ni-MH Battery Pack contained in this equipment may explode if disposed of in a fire. Do not short-circuit the Battery Pack. Do not charge the Ni-MH Battery Pack used in this equipment with any Adapter other than the one designed to charge this Battery Pack. Using another Adapter may damage the Battery Pack or cause the Battery Pack to explode. Ni-MH batteries must be disposed of properly.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Introduction

The ATLANTIS 250 is a waterproof, portable two-way VHF transceiver. It is compact, lightweight, rugged and fits easily in your hand. This handheld VHF marine radio will give you consistent, outstanding performance in virtually all conditions and situations. To ensure that you get the most from the ATLANTIS 250s features, please read this operating guide carefully before using the unit.

Features

Waterproof (meets JIS4 waterproof specifications) Triple Watch Mode Priority Channel Startup (Channel 16) Programmable Memory One-Touch Channel 16/Weather Channels Weather Alert Memory Scan USA, International and Canadian Channels Table-Top Cradle (can also be wall-mounted) Rechargeable Ni-MH Battery Pack Battery Save Operation Key Lock Back-Lit Keys and Display Belt Clip Wrist Strap TX Power 1W/5W Alkaline Battery Case (Alkaline batteries are not included)
Technical Support and Service
Your Uniden dealer can provide you with sales assistance and information. If your marine radio does not perform properly, follow the troubleshooting tips in the back of this operating guide. For technical support contact Uniden at 1-800-586-0409. The radio contains no user-serviceable parts. Unauthorized adjustment will void the warranty and may cause illegal radio operation. Be sure that a qualified technician services your radio equipment.
Caution: Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by this Operating Guide, can void your authority to operate this product.
Maritime Radio Services Operation
This transmitter will operate on channels/frequencies that have restricted use in the United States. The channel assignments include frequencies assigned for exclusive use of the U.S. Coast Guard, use in Canada, and use in international waters. Operation in these frequencies without proper authorization is strictly forbidden. For frequencies/channels that are currently for use in the world see page 20~25. Please contact the FCC Call Center at 1-888-CALLFCC for any additional channel information.

Included in Your Package

SC ME N

9 16/ I TR

ATLANTIS 250

AC Adapter (AD-0003)

Antenna (HH9408)

DC Adapter

Cradle
Rechargeable Battery (BP 250)

Beltclip

Wrist Strap

Mounting Screws

Alkaline Battery Case Reference Guide/ Printed Material (attached to the ATLANTIS)

If any of these items are missing from the box, contact your Uniden Dealer or the Uniden Parts Department at (800)-554-3988.

Getting Started

Mounting the Cradle
Mount the Cradle to either a counter or wall. To counter: Attach the Cradle using the mounting screws and washers as follows. To wall: Apply the Cradle to the wall and insert the two mounting screws into the larger holes of the Cradle Push down the Cradle until it is firmly seated. When you remove the Cradle from the wall, loosen the screws and push the Cradle up.

Attaching the Antenna

Apply the antenna to the radio as shown. Be sure the antenna is firmly seated.
Attaching the Rechargeable Battery Pack
1 Snap the battery release clip out and
remove the alkaline battery case. Then place the rechargeable battery pack onto the back of the radio. It will only fit in one way.

Contacts

2 Snap the battery release clip until it clicks.
Be sure the battery pack fits tightly against the body.
Using the Alkaline Battery Case
When needed, you can use the battery case with Alkaline AA batteries (not included) instead of the rechargeable battery pack. To install the batteries: 1 Remove the battery case cover by pulling the 2 halves apart applying your fingers to the projections.

AA AA AA AA AA AA

2 Install 6 AA Alkaline batteries (not included)
into the battery case. Be certain to follow the + and symbols in the compartment.
3 Replace the battery case cover as follows
until it clicks into place.

Attaching the Beltclip

1 Hold the beltclip in the direction as

illustrated.

2 Apply it to the hanger piece on the back
of the radio. Then slide it up.
3 When you hear a click, the beltclip is

firmly attached.

4 To take the beltclip off the radio, turn it
upside down and slide it up.
Charging the Battery Pack
Your marine radio is powered by a specially designed Ni-MH battery pack. Before operating the ATLANTIS 250, charge the Ni-MH battery pack for 16 hours without interruption with the Adapter.
1 Place the ATLANTIS 250 in the Cradle.
Make sure your radio is OFF.
2 Plug one end of the AC adapter into the
wall outlet and the other end into the Adapter jack on the back of the ATLANTIS 250.
3 Charge the battery for 16 hours.
The charger wont overcharge the battery pack. After 16 hours without interruption, charging is completed. Be sure to replace the rubber cap after charging in order to secure the waterproof seal. The radio will not charge the battery while on and receiving incoming voice traffic. When you mount the Cradle on your boat, use the DC adapter instead. The jack is for charging only. If the battery level is low, the radio needs to charge before use.

Operation

See Controls and Indicators (page 2) for button, knob, and key positions. When you turn On your ATLANTIS 250 just after purchasing, it is automatically tuned to channel 16, the United States Coast Guard frequency for distress, safety, and calling. When you press any button (except PTT), a short tone sounds.
Turning On the Unit and Setting Squelch
1 Before you turn On the unit, turn the
squelch (SQ) knob fully counterclockwise.

SPKR MIC

SQ VOL
2 Then, turn On the unit by turning the
Volume/Power (VOL) knob clockwise until you hear a hissing sound.
3 Turn the SQ knob clockwise, just until the
hissing sound stops. Use the knob to adjust to the desired squelch level. Think of the squelch control as a frequency gate which controls access to weak or strong signals depending on its setting.
Strong Signals Medium Signals Weak Signals Noise
To listen to a weak or distant station, turn the knob counterclockwise. If reception is poor, turn it clockwise to cut out weak transmissions. If the squelch control is adjusted so that you continually hear a hissing sound, the unit will not scan properly.
4 To turn Off the unit, turn the VOL knob counterclockwise until it

clicks.

Selecting a Channel
1 Turn On your ATLANTIS 250.
2 To select a higher channel,

press the L button.

3 To select a lower channel,
press the M button. To change the channel continuously, press and hold the L or M button for more than 1 second.

[DOWN ]

One-touch Channel 16/9/TRI
Example: While you are monitoring channel 20, you want to check channel 16 or channel 9.
1 You are now on channel 20.
2 To monitor channel 16, press the

16/9/TRI button.

3 To monitor channel 9, press the

16/9/TRI button again.

4 To return to channel 20, press the

Triple Watch

Triple Watch mode monitors channels 16 and 9 for a signal while you listen to the currently selected channel. The marine radio checks channel 16 and 9 for activity every 2 seconds.
1 To select Triple Watch mode, press and
hold the 16/9/TRI button for 2 seconds. A double confirmation tone sounds and TRIPLE appears on the display.
2 To exit from Triple Watch, press and
hold the 16/9/TRI button for 2 seconds. A double confirmation tone sounds and TRIPLE disappears. While in Triple Watch mode, you can change the currently selected channel using the L or M button. A momentary press of the 16/9/TRI button interrupts Triple Watch mode and remains on 16, or on channel 9 if you press once more. To return to the Triple Watch mode, simply press the button again.

Monitoring Weather Channels
The ATLANTIS 250 has 10 preprogrammed emergency/weather channel frequencies, represented by 0 through 9.
1 To listen to the emergency/weather
channels in your area, press the WX/ALERT button. WX appears on the display.
2 To move up, press the L button.
3 To move down, press the M button.
4 To exit, press the WX/ALERT button.
WX disappears from the display. To change the channel continuously, press and hold the L or M button for more than 1 second.

Emergency/Weather Alert

Emergency/Weather Alert allows your ATLANTIS 250 to function as a severe weather warning radio and will also alert you to any local or national emergencies. If the NOAA issues warning while this feature is turned On, the radio sounds an alert tone. You will then hear the emergency/weather broadcast.
1 To use Emergency/Weather Alert, select the
emergency/weather channel in your area.
2 Press and hold the WX/ALERT button for
2 seconds. A double confirmation tone sounds.
3 When the unit receives a warning signal,
it beeps for 5 seconds. WX, ALERT, and the channel number blinks.
4 To turn Off Emergency/Weather Alert,
press and hold the WX/ALERT button for 2 seconds. A double confirmation tone sounds. When Emergency/Weather Alert is activated, the highest priority is given this function. If the unit is in Scan, Triple Watch, or any other marine channels, it checks the weather alert signals every 7 seconds and switches to the warning receive mode automatically.
USA, International and Canadian Channels
1 The ATLANTIS 250 is initially set for
USA marine channels when you turn On your radio.
2 To listen to international marine
channels, press the UIC button once. INT appears on the display.
3 To listen to Canadian marine channels,
press the UIC button again. CAN appears on the display.
4 The radio will keep the last mode setting
that was selected when turned back On. For USA, international and Canadian marine channels and functions, refer to the tables starting on page 20.
Programming a Channel into Memory
Before using the scanning feature, you have to program channels into memory.

1 Select the channel to enter into memory
by pressing the L or M button.
2 Press the MEM button to store the
channel. MEM appears on the display.
Deleting a Channel from Memory
1 Select the channel to delete from
memory by pressing the L or M button.

2 Press the MEM button.

MEM disappears from the display.

Scanning

1 To begin scanning the programmed
channels, press the SCAN button. SCAN and TRIPLE appear on the display.
2 To stop scanning, press the SCAN
button once more. SCAN and TRIPLE disappear from the display. Scanning starts from the lowest to highest channel and stops when it finds an active channel. It remains on that channel until the transmission ends, then resumes scanning after a 2 second delay period. When in the scan mode, the unit automatically activates the Triple Watch feature. To deactivate Triple Watch from the scanning mode, press and hold the 16/9/TRI button for 2 seconds. TRIPLE disappears from the display.

Transmitting

1 Transmission power can be set to either
5W or 1W. Press the 1/5W/LOCK button to make the change, then the 5W or the 1W indicator on the display changes accordingly.
2 To transmit, press and hold the PTT (push-to-talk) key.
TX appears on the display.
3 To return to receive, release the PTT key.
TX disappears from the display. If the PTT key is pressed for more than 5 minutes, TX starts blinking and the transmission ends. The TX time out tone will sound until the PTT key is released. If the battery indicator drops to the blinking 1-mark level on the display and the PTT key is pressed, the radio will not transmit and the TX icon starts blinking. (Refer to the description of the Battery Indicator on the next page.)

Lighted Keys and Display

To light the display, press any key excluding the PTT key. If you press any button other than the PTT key while the display and keypad are illuminated, it remains illuminated for another 5 seconds.
Turning and reactivating the Key Beep
Your radio emits a beep each time one of the buttons (except for the PTT key) is pressed. To turn off or reactivate the Key beep: Turn the radio on again while pressing and holding the L or M buttons.

Battery Indicator

When the unit is On, battery power is always indicated on the display. When the battery is fully charged, the battery indicator appears as follows:

When the battery is nearly discharged, the battery indicator appears as follows: When the battery indicator drops to the blinking 1-mark level on the display, the radio will receive but will not transmit.

Key Lock

To prevent accidental entries, you can lock the keypad.
1 Press and hold the 1/5W/LOCK button for 2 seconds. A double
confirmation tone sounds. LOCK appears on the display.
2 To unlock the keypad, press and hold the 1/5W/LOCK button
again for 2 seconds. A double confirmation tone sounds. LOCK disappears from the display. You can also unlock the keypad by turning the radio Off and then On again.

Marine Channels - USA

Channel Desig WX0 WX1 WX2 WX3 WX4 WX5 WX6 WX7 WX8 WXFrequency (MHz) Traffic Type Transmit Receive 163.275 NOAA Weather 162.550 NOAA Weather 162.400 NOAA Weather 162.475 NOAA Weather 162.425 NOAA Weather 162.450 NOAA Weather 162.500 NOAA Weather 162.525 NOAA Weather 161.650 Can. Weather 161.775 Can. Weathe 156.050 156.050 Coml, Port Ops, VTS 156.150 156.150 Coml, Port Ops, VTS INH 156.250 156.300 156.350 156.400 156.450 156.500 156.550 156.600 156.650 156.700 RX Only 156.800 156.850 156.900 156.950 157.000 157.050 157.100 157.150 156.250 Port Ops, VTS 156.300 Safety 156.350 Coml 156.400 Coml 156.450 Coml & Non Coml 156.500 Coml 156.550 Coml, VTS, SMS 156.600 Port Ops, VTS, SMS 156.650 Navigational 156.700 Port Ops 156.750 Environmental 156.800 Distress, Safety, Calling 156.850 State Control 156.900 Coml 156.950 Coml 157.000 Port Ops 157.050 U.S. Govt Only 157.100 Coast Guard 157.150 U.S. Govt Only Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes No Yes Yes Yes Yes No Yes RX Only Yes Yes Yes Yes Yes Yes Yes Yes Note Ship to Ship RX Only RX Only RX Only RX Only RX Only RX Only RX Only RX Only RX Only RX Only Yes Yes Ship to Shore RX Only RX Only RX Only RX Only RX Only RX Only RX Only RX Only RX Only RX Only Yes Yes

Channel Desig 87 88

Frequency (MHz) Transmit Receive 157.200 161.800 157.250 161.850 157.300 161.900 157.350 161.950 157.400 162.000 156.075 156.075
Traffic Type Public Corresp. Public Corresp. Public Corresp. Public Corresp. Public Corresp.
Note DUP DUP DUP DUP DUP INH INH
Ship to Ship No No No No No
Ship to Shore Yes Yes Yes Yes Yes
156.175 156.225 156.275 156.325 156.375 156.425 156.475 RX Only 156.575 156.625 156.675 156.725 156.775 156.825 156.875 156.925 156.975 157.025 157.075 157.125 157.175 157.225 157.275 157.325 157.375 157.425
156.175 156.225 156.275 156.325 156.375 156.425 156.475 156.525 156.575 156.625 156.675 156.725 156.775 156.825 156.875 156.925 156.975 157.025 157.075 157.125 157.175 161.825 161.875 161.925 161.975 157.425
Port Ops Port Ops Coml Non Coml Non Coml Non Coml Non Coml Port Ops Port Ops Port Ops Port Ops Port Ops Non Coml Coml Coml U.S. Govt Only U.S. Govt Only U.S. Govt Only Public Corresp. Public Corresp. Public Corresp. Public Corresp. Coml

Traffic Type Duplex Duplex Duplex Duplex Duplex Duplex
INH Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No No Yes Yes Yes No Yes Yes Yes No Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No
Port Ops, 1W Port Ops, 1W
Duplex Duplex Duplex Duplex Duplex
Optional Parts and Replacement Accessories

Ni-MH Battery (BP 250)

Reference Guide

Alkaline Battery Case

Uniden Parts Department (800)-554-3988 We can also be reached on the web at www.uniden.com

Specifications

General Channels Freq. Control Freq. Tol. Oper. Temp. Antenna Microphone Display Speaker Power Source Size (without antenna) Weight (w/battery & antenna) Transmitter Frequency Range Frequency Stability Power Output Spurious Emissions Current Drain Receiver Receiver Type Transmit and Receive Weather Transmit Receive All US/International/ Canada Channel
10 PLL 1.5 PPM (at 25C) 1.5 PPM (at 25C) -4F (-20C) to +122F(+50C) Flexible Whip Built-in Electret type Liquid Crystal Display Watt Rechargeable Ni-MH Battery Pack 7.2V 1350 mAh 5.8 (H) x 2.7 (W) x 1.68 (D) inch 144 (H) x 67 (W) x 42 (D) mm 15.2 oz (430g) 156~158 MHz 10 PPM 1.0 W & 5W -60 dBc (5W) 900mA (1W), 1500mA (5W) Double Conversion Super Heterodyne Phase Locked Loop system for Local Oscillator 156~164 MHz 0.35V for 12dB SINAD Threshold 0.25V 6 dB 500 to 2000Hz
Frequency Range Sensitivity Squelch Sensitivity Audio Frequency Response Adjacent Channel 60 dB @ 25 kHz Selectivity Hum & Noise Ratio 40 dB Audio Output Power 0.5 W @ 10 % THD Current Drain Squelched 45mA Max. Audio 180mA Specifications shown are typical and subject to change without notice.

Troubleshooting

Not enough range Cause: Line of sight blocked Increase antenna height. Will not transmit on 5 watt range but will transmit on the 1 watt range. Cause: Low voltage Recharge or replace the batteries. Will not transmit while charging. Cause: Low voltage The radio is not designed to transmit while charging. DC or AC adapter does not supply enough power for transmitting. Battery will not charge. Cause: Low voltage Do not to transmit while charging. The adaptor does not supply enough power for transmitting.
FCC RF EXPOSURE INFORMATION
WARNING! Read this information before using the radio In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of the radio complies with the FCC guidelines and these international standards. Never allow children to operate the radio without adult supervision and the knowledge of the following guidelines. WARNING! It is up to the user to properly operate this radio transmitter to insure safe operation. Please adhere to the following:

Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the radio, or result in violation of FCC regulations. Do not use the radio with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for a replacement antenna. Body-worn Operation This device was tested for typical body-worn operations using the supplied belt-clip, which typically provides a space of 1 inch from the body. To maintain compliance with FCC RF exposure requirements, body-worn operations are restricted to the supplied belt-clip. For hand-held operation, the radio should be held 1 inch from the user's face. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided. For more information about RF exposure, please visit the FCC website at www.fcc.gov. When using an external speaker microphone, USE ONLY THE UNIDEN MODEL HHVTA07 (black) or HHVTAW07 (white). Use of any other accessory for this purpose may invalidate your authority to operate this device.
Three-Year Limited Warranty
Important! Evidence of original purchase is required for warranty service. WARRANTOR: Uniden ELEMENTS OF WARRANTY: Uniden warrants for three years, to the original retail owner, this Product excluding Ni-MH battery pack to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. Uniden warrants for 12 months, to the original retail owner, the Ni-MH battery pack to be free from defects in material and craftmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 36 months (12 months for the Ni-MH battery pack) after the date of original retail sale. The warranty is invalid if the Product is (A)damaged or not maintained as reasonable or necessary, (B)modified, altered, or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, (C)improperly installed, (D)serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty, (E)used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F)installed or programmed by anyone other than as detailed by the Operation Guide for this product. STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its representatives in connection with the performance of this warranty. Warrantor, at its option, may replace the unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty is void outside the United States of America. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in this Operating Guide you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). The Product should include all parts and accessories originally packaged with the Product. Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid by traceable means to warrantor at: Uniden America Corporation Parts and Service Division 4700 Amon Carter Blvd. Ft Worth, TX 76155 (800) 235-3874