VIDEO CARD

PDA-5002
This product is an optional card for use with the plasma display. Installing this card makes the display compatible with High Definition, video and digital RGB input.
Digital RGB Input Compatibility This card is equipped with an advanced digital RGB (DVI) terminal. The advantages of digital RGB input include clear, noise-free image and data presentation. Thanks to DVI, you can just connect the computer to the display and the appropriate screen size is set automatically.
*DVI is a digital RGB signal transmitting format. The DVI terminal on the PDA-5002 does not support HDCP copy protection.

Dimensions

13/16(20.4) 7-7/8(200) 3/16(4.5) 27/32(21.5)
11/32(8.35) 9-19/32(243.8) 5-1/32(127.9) 7-7/8(148.9)

1-3/32(27.6)

Unit : inch (mm)
PDA-5002 VIDEO CARD SPECIFICATIONS
Dimensions (W x H x D) Weight Operating Temperature Accessories included Pin / BNC conversion adapter Screws Label for remote control unit Connector Indicator Label Operating Instruction x1 x2 x1 x1 9-19/32" x 1-3/32" x 5-7/8" (243.8 x 27.6 x 148.9 mm) 11oz (0.3kg) 32 F-104 F (0 -40 )
DVI Computer Input Signal
Resolution (Dot x Line) 640 x x x x 864*x 768*x 960*1 Vertical Frequency 60Hz 56Hz 60Hz 60Hz 60Hz 56Hz 60Hz 60Hz Horizontal Frequency 31.5kHz 35.2kHz 37.9kHz 48.4kHz 53.7kHz 45.1kHz 48.4kHz 60kHz Remarks (852 x 480) (864 x 480)
Video Input / Output Terminals
IN Mini DIN 4 pin (S terminal) Y/C separate video signal Y : 1Vp-p/75 C : 0.286Vp-p/75(NTSC) 0.3Vp-p/75(PAL) IN OUT IN BNC BNC DVI-D 24 pin Composite video signal Composite video signal 1Vp-p/75 75
60Hz 64kHz 1280 x 1024*1 *1Compressed or partial display *2When exclusive video card is used.

Computer Screen Display

VGA DOT BY DOT 4:3 (Expanded / Compressed) Full Partial *1 4:3 and FULL pictures are compressed. Partial image are shown in real size. SVGA XGA SXGA*1
Digital RGB signal (DVI compliant) *1
*Compatible with Microsoft Plug & Play (VESA DDC 2B) *It is not compatible with copy protection systems (HDCP).
Audio Input / Output Terminals
Connector IN IN Pin x 2 (L/R) Pin x 2 (L/R) Level/Impedance L/R : 500mVrms/more than 10k L/R : 500mVrms/more than 10k
Video Input Signal Compatibility
3.58NTSC, 4.43NTSC, PAL, SECAM
Video Signal Compatibilty Table(Component,RGB)
Refresh rate Vertical Horizontal Fv(Hz) FH(kHz) 15.28.1 31.25 15.734 31.33.75 45.0 67.5 Signal format Component RGB Component RGB Component RGB Component RGB Component RGB Component RGB Component RGB Component RGB Remarks
*Microsoft is a registered trademark of Microsoft Corporation. *VESA is a registered trademark of Video Electronics Standards Association. *Design and specifications are subject to change without notice. Notice This equipment is sold on the condition that it will be installed by a competent professional engineer with sufficient training and skill to carry out proper installation. Be sure to entrust the installation and setup of this machine only to a competent professional or retail service engineer.
625i(575i)/SDTV 1125i(1080i)/HDTV 625p(575p)/SDTV 525i(480i)/SDTV 525p(480p)/SDTV 1125i(1080i)/HDTV 750p(720p)/HDTV 1125p(1080p)/HDTV
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan TEL : 81-3-3495-6729 FAX : 81-3-3490-2785 PIONEER ELECTRONICS (USA) INC. 2265 East 220th Street, Long Beach, CA 90810, USA TEL : 310-952-2111 FAX : 310-952-2990 PIONEER HIGH FIDELITY TAIWAN CO., LTD. 13FL No. 44 Chung Shan North Road Sec.2. Taipei, Taiwan TEL : 886-2-2521-3588 FAX : 886-2-2511-4888 CONTACT PIONEER CORPORATION URL : http://www.pioneer.co.jp/ PIONEER ELECTRONICS(USA)INC. URL : http://www.pioneerelectronics.com/ 4104V

External Dimensions (PDP-433CMX/PDP-433MXE) External Dimensions (PDP-433CMX/PDP-433MXE)
Weight: 31.5 kg (without attachment stand) Material: Front: Resin; Rear cover: Aluminum, Front protector panel: Glass Treatment: Front: Paint; Rear cover: Paint (All paints are Pioneer original colors) For packaging information, refer to 3.4.2 Unpacking. : Center of gravity (Unit: mm)
544 536.1 (effective screen dimensions)
952.3 (effective screen dimensions) 963
Light sensor for the remote Unit operating panel
MAIN POWER switch 910 (centering) Terminal area dimensions

Rear View 1014

14-M8 70
Specifications (PDP-433CMX/PDP-433MXE)
Light-emitting panel. 43-inch plasma display panel Aspect ratio... 16 : 9 Pixels... Pixel pitch. 0.930 (HRGB trio) 0.698(V) mm Viewing angle. Horizontal: more than 160 degrees Vertical: more than 160 degrees Input/output terminals Video-related <PDP-433CMX/PDP-433MXE> INPUT 1 Input Mini D-sub, 15-pin connector (female) 1 RGB signal (for G ON SYNC) R,G,B. 0.7 Vp-p/75 /no sync G ON SYNC. 1 Vp-p/75 / sync negative HD/CS.VD TTL level (1 to 5 Vp-p)/ positive and negative polarity/2.2 k 2 Component video signal# (applies only when equipped with PDA-5002) Y. 1.0 Vp-p/75 /sync negative PB/CB, PR/CR. 0.525 Vp-p/75 (75% degree of saturation) * Microsoft Plug & Play (VESA DDC 1/2B) supported Output INPUT 2 Input Mini D-sub, 15-pin connector (female).. 75 /with buffer BNC terminal RGB signal (for G ON SYNC) R,G,B. 0.7 Vp-p/75 /no sync G ON SYNC. 1 Vp-p/75/ sync negative HD/CS.VD TTL level (1 to 5 Vp-p)/ positive and negative polarity/ 75 or 2.2 k (with impedance switching) 2 Component video signal# (applies only when equipped with PDA-5002) Y. 1.0 Vp-p/75 /sync negative PB/CB, PR/CR. 0.525 Vp-p/75 (75% degree of saturation) Audio-related <PDP-433CMX/PDP-433MXE> AUDIO INPUT Input Stereo mini jack (for INPUT 1/2/5) L/R. 500mVrms/more than 10 k AUDIO OUTPUT Output Stereo mini jack L/R. 500mVrms (max)/less than 5 k Output L/R. 8 to 16 /2 W + 2 W (at 8 )

SPEAKER

<PDA-5002># (applies only when equipped with PDA-5002) AUDIO INPUT Input Pin jack (x2) (for INPUT 3) L/R. 500mVrms/more than 10 k AUDIO INPUT (for INPUT 4) Input Pin jack (x2) L/R. 500mVrms/more than 10 k
Control-related RS-232C terminal: D-sub, 9-pin (male)

(NOTE 1)

Combination In/Out Terminal: Mini-DIN, 6-pin Control In/Out Terminal: Monaural mini-jack ( 2) Power requirements PDP-433CMX. AC 100 V to 120 V, 50/60 Hz PDP-433MXE. AC 100 V to 240 V, 50/60 Hz In-rush... less than 30 A Power factor.. more than 0.95 Consumption PDP-433CMX. 298 W (NOTE 2) (0.9 W in standby) PDP-433MXE.. 298 W (NOTE 2) (1 W in standby) External dimensions (without attachment stand).. 1070 (W) 630 (H) 98 (D) mm 42-1/8 (W) 24-13/16 (H) 3-7/8 (D) in. Weight (without attachment stand). 31.5 kg (69.4 lbs.) Dimensions of packaging. 1193 (W) 748 (H) 424 (D) mm 46-31/32 (W) 29-7/16 (H) 16-11/16 (D) in. Weight when packaged. 41.5kg (91.5 lbs.) Operating Temperature.. 0 to 40 C (32 to 104 F) (NOTE 3) Operating Humidity... 20 to 80 % Operating atmospheric pressure.. 800 to 1100 hPa Storage limitations (when installed) Temperature.. 20 to +60 C (4 to 140 F) Humidity... 20 to 90 % Atmospheric pressure.. 670 to 1500 hPa Storage limitations (when in original package) Temperature. 30 to +60 C (22 to 140 F) Humidity... 20 to 90 % Atmospheric pressure.. 670 to 1500 hPa Stacking.. Fewer than three tiers Standard accessories <PDP-433CMX/PDP-433MXE> Power cord (PDP-433CMX only).. 1 Ferrite core (PDP-433MXE only).. 1 Cable tie (PDP-433MXE only).. 1 Remote control unit... 1 AA battery... 2 Wiping cloth... 1 Speed clamp... 2 Bead Band... 2 Operating instructions... 1 Warranty card... 1 Remote control unit holder... 1 Display stand... 2 Washer... 2 Hexagon socket head screw (M8 x 40).. 2 <PDA-5002># (applies only when equipped with PDA-5002) Label for remote control unit.. 1 BNC/Pin conversion adaptor... 1 Connector indicator label... 1 Operating Instructions.. 1 Warranty... 1 Specifications and external designs are subject to change without notice.

<PDA-5002># (applies only when equipped with PDA-5002) INPUT 3 Input S terminal (Mini-DIN, 4-pin connector) Y/C separate video signal Y. 1.0 Vp-p/75 /sync negative C. 0.286 Vp-p/75 (NTSC) 0.3 Vp-p/75 (PAL) INPUT 4 Input BNC terminal Composite video signal. 1.0 Vp-p/75 /sync negative BNC terminal. 75 /with buffer DVI-D 24-pin connector Digital RGB signal (DVI compliant TMDS signal)

Output INPUT 5 Input

* Microsoft Plug & Play (VESA DDC 2B) supported
(NOTE 1) The display is preset at the factory to 4800bps. This setting can be changed using either the remote control unit or a PC. Allow for 320 W = 320VA of consumption per unit. The correct operating environmental temperature may vary, depending on the installation site. (Refer to Installation Site Requirements.)

(NOTE 2) (NOTE 3)

Specifications

INPUT Response Signals

INPUT 1, 2
& Video signals supported # (applies only when equipped with PDA-5002)
Vertical Frequency Fv (Hz) Horizontal Frequency Fh (kHz) 15.625
Signal Format Component RGB Component RGB Component RGB Component RGB Component RGB Component RGB Component RGB Component RGB
Remark 625i(575i) SDTV 1125i(1080i) HDTV 625p(575p) SDTV 520i(480i) SDTV 525p(480p) SDTV 1125i(1035i, 1080i) HDTV High vision video signal 750p(720p) HDTV 1125p(1080p) HDTV
28.1 31.25 15.734 31.33.75 45.0 67.5
& PC signals supported

Resolution (Dot x Line)

640 x x 480

Vertical Frequency

56.4Hz 70.1Hz 60Hz 66.7Hz 72Hz 75Hz 85Hz

Horizontal Frequency

24.8kHz 31.5kHz 31.5kHz 35.0kHz 37.9kHz 37.5kHz 43.3kHz 35.2kHz 37.9kHz 48.1kHz 46.9kHz 53.7kHz 49.7kHz 31.7kHz 48.4kHz 56.5kHz 60.0kHz (60.2kHz) 68.7kHz

Remark

NEC PC-9800 NEC PC-9800 (852 x 480) (864 x 480) Apple Macintosh 13"

1152 x 864

60Hz 72Hz 75Hz
53.7kHz 64.9kHz 67.7kHz 68.7kHz 61.8kHz 71.7kHz 45.1kHz 48.4kHz 55.5kHz 60.0kHz 64.0kHz 80.0kHz 91.1kHz 75.0kHz 81.3kHz 87.5kHz 93.8kHz 106.3kHz

1152 x x 900

75.1Hz 66.0Hz 76.0Hz

Apple Macintosh 21"

Sun Microsystems LO Sun Microsystems HI

800 x 600

56Hz 60Hz 72Hz 75Hz 85Hz
1280 x 768 (1072 x 600) 1280 x 960 Apple Macintosh 16" 1600 x x 1024
56Hz 60Hz 70Hz 60Hz 60Hz 75Hz 85Hz 60Hz 65Hz 70Hz 75Hz 85Hz

(1600 x 1024)

832 x x x 768
74.6Hz 60Hz 60Hz 70Hz 75Hz (74.9Hz) 85HZ
(1376 x 768) Figur in brackets are for Apple Macintosh 19"
INPUT 3# (applies only when equipped with PDA-5002): Y/C Separate video signal NTSC, PAL, SECAM, 4.43 NTSC INPUT 4# (applies only when equipped with PDA-5002): Composite video signal NTSC, PAL, SECAM, 4.43 NTSC INPUT 5# (applies only when equipped with PDA-5002)

640 x x x x x x x x 1024

60Hz 56Hz 60Hz 60Hz 60Hz 60Hz 56Hz 60Hz 60Hz 60Hz
31.5kHz 35.1kHz 37.9kHz 31.7kHz 48.4kHz 53.7kHz 45.1kHz 48.1kHz 60.0kHz 64.0kHz

Controls and Connectors

Connection Panel

AC INLET 8 ~16 SPEAKER

INPUT5 DIGITAL RGB

INPUT3 S-VIDEO

INPUT4 VIDEO

OUTPUT

8 ~16 SPEAKER

CONTROL IN OUT

COMBINATION IN OUT

RS-232C ANALOG RGB

INPUT1

(ON SYNC)

OUTPUT (ANALOG RGB)

INPUT2 (H/V SYNC) R HD

75 2.2 k

AUDIO INPUT OUTPUT

(INPUT1/2)

Plasma Display Section

1 SPEAKER (R) terminal
For connection of an external right speaker. Connect a speaker whose impedance is 8 -16.

4 RS-232C

This terminal is used for adjustments by a PC (EIA232-F standard). (See 5.5 RS-232C Adjustment Mode)
2 CONTROL IN/OUT (monaural mini jacks)
For connection of PIONEER components that bear the mark. Making CONTROL connection enables control of the main unit as a component in a system. (NOTE) The main unit cannot be operated by the wired remote control RV-V107.
5 INPUT1 (mini D-sub 15 pin)
For connection of components that have RGB or component#(applies only when equipped with PDA5002) output jacks such as a personal computer, DVD player, or external RGB decoder.

3 COMBINATION IN/OUT

Used when a number of sets are controlled collectively. (See 5.6 Combination Connection) Please use a mini DIN 6 pin cable (straight, fully connected) available on the market as the connecting cable. (NOTE) It has no ABL linking function. And it is not compatible with the RM-V4000V or other multi-projection. It is not output when the main power is off.

6 OUTPUT (INPUT1)

(mini D-sub 15 pin) Use the OUTPUT (INPUT1) connector to output the video signal to an external monitor or other component. (NOTE) The video signal will not be output from the OUTPUT (INPUT1) connector when the main power of this display is off or in standby mode. When connecting the main units in a series, please set the number that can be connected as a total of 5 including the set that the signal is initially input to. But a condition for performing separate sink or composite sink input and output is that the sink level of the source used is at least TTL level at 2.2k terminal time.
Controls and Connectors 7 INPUT2 (BNC jacks)
For connection of components that have RGB or component# (applies only when equipped with PDA5002) output jacks such as a personal computer, DVD player, or external RGB decoder.
Video Card <PDA-5002> Section # (applies only when equipped with PDA-5002)

! INPUT5 (DVI-D jack)

Use to connect a computer. Note: This unit does not support the display of copyguard-protected video signals.

8 Synchronizing signal impedance selector switch
Depending on the connections made at INPUT2, it may be necessary to set this switch to match the output impedance of the connected components synchronization signal. When the output impedance of the components synchronization signal is below 75 , set this switch to the 75 position.
@ AUDIO INPUT3 (RCA Pin jacks)
Use to obtain sound when INPUT3 is selected. Connect these jacks to the audio output connectors of components connected to the video cards INPUT3. Note: The left audio channel (L) jack is not compatible with monaural input sources.
9 AUDIO INPUT (Stereo mini jack)
Use to obtain sound when INPUT1, INPUT2 or INPUT5# (applies only when equipped with PDA5002) is selected. Connect this jack to the audio output connector of the device connected to the plasma displays INPUT1 or INPUT2, or to the audio output connector of the device connected to the video cards INPUT5# (applies only when equipped with PDA-5002).

# INPUT3 (S-video jack)

For connection of components that have an S-video output jack such as a video deck, video camera, laser disc player, or DVD player.
$ AUDIO INPUT4 (RCA Pin jacks)
Use to obtain sound when INPUT4 is selected. Connect these jacks to the audio output connectors of components connected to the video cards INPUT4. Note: The left audio channel (L) jack is not compatible with monaural input sources.
0 AUDIO OUTPUT (Stereo mini jack)
Use to output the audio of the selected source component connected to the main unit to an AV amplifier or similar component.

- MAIN POWER switch

Use to switch the main power or the main unit on and off.

% INPUT4 (BNC jack)

For connection of components that have a composite video output jack such as a video deck, video camera, laser disc player, or DVD player.

= AC INLET

A power cable is furnished with the main unit: connect one end of the power cable to this connector and the other end to a standard AC power source.
^ OUTPUT (INPUT4) (BNC jack)
Use the OUTPUT (INPUT4) jack to output the video signal to an external monitor or other component. Note: The video signal will not be output from the OUTPUT (INPUT4) jack when the main power of this display is off or in standby mode.

~ SPEAKER (L) terminal

For connection of an external left speaker. Connect a speaker that has an impedance of 8 -16.