Reviews & Opinions
Independent and trusted. Read before buy Panasonic KX-TGA101S!

Panasonic KX-TGA101S Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Panasonic KX-TGA101S, size: 774 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


Panasonic KX-TGA101SPanasonic KX TGA101S Cordless extension handset - Silver

Panasonic - 1-line - With Speakerphone - With LCD Display - With Conference Calling - With Voicemail

Here you can find all about Panasonic KX-TGA101S, for example volume and troubleshooting, batteries, handset, operating instructions, headset, static, phone. You can also write a review.
[ Report abuse or wrong photo | Share your Panasonic KX-TGA101S photo ]

Video review



User reviews and opinions

Comments to date: 11. Page 1 of 1. Average Rating:
filo62 1:17pm on Tuesday, October 26th, 2010 
This purchase was exactly what I expected. The phones were extremely easy to set up, they worked well, they look great, and there were no surprises. Convenient for home use. Operates well as you walk around. Comfortable Handset","Easy To Set Up","Good Sound","Nice Features".
lat 8:25am on Friday, September 3rd, 2010 
Works fine within a fairly remote range, has a good set of features (though other additional features are not often used), is a good deal.
lennyjames 12:09am on Wednesday, August 18th, 2010 
nothing is bad Comfortable Handset","Compact design","Easy To Set Up","Good Sound","Good Speakerphone","Nice Features","Strong Signal","Wide Range
snies 3:15pm on Tuesday, July 20th, 2010 
good product will recommand it to anybody for home or office use Comfortable Handset,Compact design,Easy To Set Up,Good Sound,Good Speakerphone.
fonzy44 2:57am on Monday, July 19th, 2010 
Easy to set up and use Comfortable Handset, Compact design, Easy To Set Up, Good Sound, Nice Features, Strong Signal, Wide Range We bought the extra handset as the original package came with one base and two satelites. That was a few years ago. I was concerned that the new.
terence 10:22pm on Sunday, June 13th, 2010 
While putting a multi piece NewEgg purchase together I missed part about this being an expansion headset unit and requiring a base unit.
wpaulson 8:14am on Sunday, May 30th, 2010 
Could have been thought out better I can understand that there is a limited amount of real estate on the face of the phone but to put the off button r... Would not buy from vendor again I ordered 2 handsets and returned them for a full refund.
clancolin 9:56pm on Tuesday, May 11th, 2010 
Using in small office with two lines. This product was inexpensive compared to others and works great. Works better than the AT&T phones we had. Easy To Set Up,Good Sound,Good Speakerphone,Strong Signal,Wide Range Little too small
PNP 7:36am on Tuesday, April 13th, 2010 
very poor reception, worse than the last generation Limited Range","Poor Battery Life","Poor Sound Quality","Produces Static","Weak Signal
chlsmith 6:25pm on Tuesday, April 6th, 2010 
Excellent phone that has wonderful sound quality & range. Tons of great (& useful) features. After 2 yrs, still going strong w/great battery life.
tgrier 11:58am on Tuesday, April 6th, 2010 
average 2 line phone thought phone would have better range easy to use Compact design,Easy To Set Up,Good Sound Not Durable,Weak Signal

Comments posted on are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.




L To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. L Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact the Panasonic Call Center at 1-800-211PANA (1-800-211-7262). L Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use. L Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. L Completely insert the AC adaptor/ power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. L Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.
L Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. L Use caution when installing or modifying telephone lines. L Do not touch the plug with wet hands. L The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. Battery To reduce the risk of fire or injury to persons, read and follow these instructions. L Use only the battery(ies) specified. L Do not mix old and new battery(ies). L Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal instructions. L Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. L Exercise care when handling the battery(ies). Do not allow conductive materials such as rings, bracelets or keys to touch the battery(ies), otherwise a short circuit may cause the battery(ies) and/or the conductive material to overheat and cause burns. L Charge the battery(ies) provided, or identified for use with the product only, in accordance with the instructions and limitations specified in this manual. Medical L Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to

5 Example: [1]

Voice guidance language
You can select either English or Espaol as the voice guidance language of the answering system. The default setting is English.

In use

1 {MENU} 2 {V}/{^}: Answering device i
Setting the unit before use

Display language

You can select either English or Espaol as the display language. The default setting is English.
{V}/{^}: Settings i {OK} {V}/{^}: Voice prompt i {OK} {V}/{^}: Select the desired setting. {OK} i {OFF}

Dialing mode

If you cannot make calls, change this setting according to your telephone line service. The default setting is Tone. Tone: For tone dial service. Pulse: For rotary/pulse dial service.
1 {MENU} 2 {V}/{^}: Handset settings i
3 {V}/{^}: Display settings i
1 {MENU} 2 {V}/{^}: Set tel line i {OK} 3 {V}/{^}: Set dial mode i
4 {V}/{^}: Select the desired setting. 5 {OK} i {OFF}
Preparation Date and time
Set the correct date and time. To use the available alarm function (page 25). When you play back a message from the answering system (page 28), the unit announces the day and time it was recorded.
1 {MENU} 2 {V}/{^}: Set date & time i
3 {V}/{^}: Date and time i
4 Enter the current month, day, and
year by selecting 2 digits for each. Example: August 15, 2007 {0}{8} {1}{5} {0}{7}
5 Enter the current hour and minute
(12-hour clock format) by selecting 2 digits for each. Example: 9:30 {0}{9} {3}{0}
6 Press {*} to select AM or PM. 7 {OK} i {OFF}
Note: L When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used. L If you make a mistake when entering the date and time, press {<}, {>}, {^}, or {V} to move the cursor, then make the correction. L The date and time may be incorrect after a power failure. In this case, set the date and time again.

Making calls

1 Dial the phone number.
L To correct a digit, press {CLEAR}.
4 {V}/{^}: Erase i {OK} 5 {V}/{^}: Yes i {OK} i {OFF}
Note: L Step 3 variation: Press {CLEAR}, then skip to step 5. PAUSE button (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 19). For example, if you need to dial the line access number 9 when making outside calls with a PBX:
2 Press {C}. 3 When you finish talking, press {OFF}
or place the handset on the base unit or charger. Using the speakerphone
1 Dial the phone number, and press
{s}. L Speak alternately with the other party.
2 When you finish talking, press
{OFF}. Note: L Use the speakerphone in a quiet environment. L To switch to the receiver, press {C}. Adjusting the receiver/speaker volume Press {^} or {V} repeatedly while talking. Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list (each 48 digits max.).

1 {MENU} 2 {V}/{^}: Alarm i Press {OK} 2 times. 3 {V}/{^}: Select the desired alarm mode. i {OK}
Off Once Daily Turns alarm off. Press {OK} again, then press {OFF} to exit. The alarm sounds once at the set time. Enter the desired date. An alarm sounds daily at the set time.
4 Set the desired time. i {OK} 5 {V}/{^}: Select the desired ringer tone. i {OK}
L We recommend selecting a different ringer tone from outside call.
6 {V}/{^}: Save i {OK} i {OFF}
Note: L To stop the alarm, press any dial key or place the handset on the base unit or charger. L When the handset is in use, the alarm will not sound until the handset is in standby mode. L If you select Once, the setting will change to Off after the alarm sounds. L When the ringer volume is set to off, the handset rings at the low level for alarm.

Customer support

The handset can display the Internet address where you can download the operating instructions or get further information for this product using your computer.
1 {MENU} 2 {V}/{^}: Customer support i {OK} i {OFF}

Answering system

This unit contains an answering system which can answer and record calls for you when you are unavailable to answer the phone. Important: L Only 1 person can access the answering system at a time. L When callers leave messages, the unit records the day and time of each message. Make sure the date and time have been correctly set (page 15).
Turning the answering system on/off
Base unit Press {ANSWER ON} to turn on/off the answering system. L When the answering system is turned on, the ANSWER ON indicator lights. L When the answering system is turned off, the ANSWER ON indicator turns off. Handset

Memory capacity

The total recording capacity (including your greeting message) is about 16 minutes. A maximum of 64 messages can be recorded. L If the message memory becomes full, the MESSAGE indicator flashes rapidly (if the answering system is turned on). Erase unnecessary messages (page 28). L When the message memory becomes full, the greeting message is different depending on your situation: If you use the prerecorded greeting message, the unit automatically switches to another prerecorded greeting message asking callers to call again later. If you recorded your own greeting message, the same message is still announced to callers even though their messages are not recorded.

3 {V}/{^}: Answer on or Answer

offi {OK} i {OFF}

Screening calls
While a caller is leaving a message, you can listen to the call through the handsets speaker. You can answer the call by pressing {C} on the handset. Note: L To turn this feature off, see page 32.
Answering System 3 {V}/{^}: Play greeting i

Greeting message

When the unit answers a call, callers are greeted by a greeting message. You can record your own greeting message or use a prerecorded greeting message.

{OK} i {OFF}

Erasing your greeting message 1 {MENU} 2 {V}/{^}: Answering device i
Recording your greeting message
You can record your own greeting message (max. 2 minutes and 30 seconds). If you do not record a greeting message, a prerecorded greeting message is used.
3 {V}/{^}: Erase message i
4 {V}/{^}: Erase greeting i
5 {V}/{^}: Yes i {OK} i {OFF}
3 {V}/{^}: Record greeting i
4 After the handset beeps, speak
clearly about 20 cm (8 inches) away from the microphone.
5 To stop recording, press {OK}. 6 {OFF} Using a prerecorded greeting message
If you erase or do not record your own greeting message, the unit plays a prerecorded greeting message for callers and ask them to leave messages.
Playing back the greeting message 1 {MENU} 2 {V}/{^}: Answering device i
Listening to messages using the base unit
When new messages have been recorded, the MESSAGE indicator on the base unit flashes. Press {MESSAGE}. L The base unit plays new messages. L When you have no new messages, the base unit plays back all messages.
Listening to messages using the handset
When new messages have been recorded: New message is displayed. The message indicator on the handset flashes slowly if the message alert feature is turned on (page 32).
Operating the answering system
Key {>} or {<} Operation Adjust the speaker volume (during playback) Repeat message (during playback)*1 Skip message (during playback) Stop playback Erase message currently playing
3 {V}/{^}: Play new msg. or Play

all msg. i {OK}

4 When finished, press {OFF}.

Remote commands

You can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you. Key {1} {2} {4} {5} {6} {7} {9} Remote command Repeat message (during playback)*1 Skip message (during playback) Play new messages Play all messages Play greeting message Record greeting message Stop recording Stop playback*2 Start voice guidance*3 Turn answering system off Erase message currently playing Erase all messages Erase greeting message (during greeting message playback) End remote operation (or hang up)

{0} {*}{4} {*}{5} {*}{6}

*1 If pressed within the first 5 seconds of a message, the previous message is played. *2 For English voice guidance only L To resume operation, enter a remote command within 3 seconds, or the voice guidance starts. *3 For Spanish voice guidance only
Answering System Turning on the answering system remotely
If the answering system is off, you can turn it on remotely.
5 Enter the desired 3-digit remote

code. i {OK} i {OFF}

Ring count
You can change the number of times the phone rings before the unit answers calls. The default setting is 4 rings. Toll saver: The unit answers on the 2nd ring when new messages have been recorded, and on the 4th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 29), you will know that there are no new messages when the phone rings for the 3rd time. You can then hang up without being charged for the call.
1 Dial your phone number from a touch
2 Let the phone ring 15 times. 3 Enter your remote code within 10
seconds after the beep. L The unit answers your call with the greeting message. L You can hang up, or enter your remote code again and begin remote operation (page 29).
Skipping the greeting message to leave a message
You can leave a message just as any outside caller can. Call your phone number. When the answering system picks up, press {*} to skip the greeting message and record your message after the beep.
{V}/{^}: Settings i {OK} {V}/{^}: Ring count i {OK} {V}/{^}: Select the desired setting. {OK} i {OFF}
Answering system settings

Remote code

A remote code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is 111.
3 {V}/{^}: Settings i {OK} 4 {V}/{^}: Remote code i {OK}
For Voice Mail service subscribers If you subscribe to a flat-rate service package that includes Caller ID, Call Waiting, Voice Mail, and unlimited local/ regional/long distance calls, please note the following: L To use the Voice Mail service provided by your telephone service provider rather than the units answering system, turn off the answering system (page 26). L To use this units answering system rather than the Voice Mail service provided by your telephone service provider, please contact your telephone service provider to deactivate your Voice Mail service.

Please contact your telephone service provider for details.

Message alert

You can select whether or not the message indicator on the handset flashes slowly when there are new recorded messages in the Voice Mail system. The default setting is Off. Important: L If there are new answering system messages present (page 26), the message indicator also flashes slowly.
Multi-unit Operation 2 To stop paging:


Intercom calls can be made between handsets Note: L If you receive an outside call while talking on the intercom, you hear 2 tones. To answer the call, press {OFF}, then press {C}. L When paging a unit for an intercom call, the paged unit beeps for 1 minute.
Base unit: Press {LOCATOR}. Handset: Press {OFF}.
Transferring calls between handsets, conference calls
Outside calls can be transferred between 2 handsets. 2 handsets can have a conference call with an outside party.
Making an intercom call 1 {INTERCOM} 2 Select the handset you want to page
by pressing the desired handset number ({1} {6}). L To stop paging, press {OFF}.
1 During an outside call, press
{TRANSFER} to put the call on hold.
2 Select the handset you want to
transfer to by pressing the desired handset number ({1} {6}). L If you do not wish to announce the transfer, skip to step 4.
3 When you finish talking, press


3 Wait for the paged party to answer.
L If the paged party does not answer, press {C} to return to the outside call.
Answering an intercom call 1 Press {C} or {s} to answer the
4 To complete the transfer:
Press {OFF}. L The outside call is being routed to the handset. To establish a conference call: Press {MENU}. i {1} L To leave the conference, press {OFF}. The other parties can continue the conversation. Note: L If the paged party does not answer within 1 minute after you hang up, your phone rings and the call is returned to your phone. You can speak to the caller again by pressing {C}.
{OFF}. Note: L When the ringer volume is set to off, the handset rings at the low level for the intercom calls.

Handset locator

You can locate a misplaced handset by paging it.

1 Base unit:

{LOCATOR} L The handset beeps for 1 minute.
Answering transferred calls Press {C} to answer the page. L After the paging party disconnects, you can talk to the outside caller.
3 {V}/{^}: Registration i {OK} 4 {V}/{^}: Deregistration i
5 {3}{3}{5} i {OK} 6 Select the handset(s) you want to
cancel by pressing the desired handset number ({1} {6}). i {OK} L The selected handset number(s) flashes. L To cancel a selected handset number, press the number again. The number stops flashing.

Registering a handset

The included handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset.

1 Handset:

7 {V}/{^}: Yes i {OK} 8 After Deregistered is displayed,

press {OFF}.

3 {V}/{^}: Registration i {OK} 4 {V}/{^}: HS registration i

5 Base unit:

Press and hold {LOCATOR} until the registration tone sounds. L If all registered handsets start ringing, press {LOCATOR} to stop, then repeat this step. L After the base unit beeps, the rest of the procedure must be completed within 1 minute and 30 seconds.

6 Handset:

Press {OK}, then wait until a beep sounds and w stops flashing. Registering an additional handset See page 3 for information on the available model. Start from step 5.
Deregistering a handset 1 {MENU} 2 {V}/{^}: Handset settings i
{OK} For assistance, please visit
Useful Information 3 Insert the hooks on the wall
Wall mounting (Base unit only)
1 Lead the AC adaptor cord and
telephone line cord through the hole in the wall mounting adaptor in the direction of the arrow.
mounting adaptor into the holes 1 and 2 on the base unit.
4 Adjust the adaptor to hold the base
unit, then push it in the direction of the arrow until it clicks into place.
2 Tuck the telephone line cord inside
the wall mounting adaptor (A). Connect the AC adaptor cord and telephone line cord (B).

AC adaptor cord

Useful Information 5 Connect the telephone line cord.
Mount the unit by inserting the mounting pins into the round openings on the adaptor (for pin 2, use round cut out at the bottom of the adaptor if you are using the 4 inches phone plate), then sliding the unit down to secure it. Connect the AC adaptor to power outlet (page 9). L There are two common types of wall phone plates. The distance between 1 and 2 may vary depending on the size of the wall phone plate installed. To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B).

mm (31/4 inches) or 102 mm (4 inches) 2 (120 V AC, 60 Hz) 83 mm (31/4 inches) 102 mm (4 inches)

Belt clip

You can hang the handset on your belt or pocket using the included belt clip. To attach the belt clip
To remove the belt clip While pressing the top of the clip(A), pull the right edge in the direction of the arrow (B).

Headset (optional)

Connecting a headset to the handset allows hands-free phone conversations. We recommend using the Panasonic headset noted on page 5.
L Headset shown is KX-TCA86.

Error messages

If the unit detects a problem, one of the following messages is shown on the display. Display message Busy Cause/solution L The called handset is in use. L The handset you are calling is too far from the base unit. L There is no handset registered to the base unit matching the extension number you entered. L Other units are in use and the system is busy. Try again later. L Recording was too short. Try again. L The handset you tried to copy phonebook items to is in use. Try again later. L The destination handsets phonebook memory is full. Erase unnecessary items from the destination handsets phonebook (page 19). L There is no space to store new items in the phonebook. Erase unnecessary items (page 19). L There is no space in memory to record new messages. Erase unnecessary messages (page 28). L Your phonebook, caller list or redial list is empty. L The handset has lost communication with the base unit. Move closer to the base unit, and try again. L Confirm that the base units AC adaptor is plugged in. L The handsets registration may have been canceled. Re-register the handset (page 35). L A handset button was pressed while the handset was on the base unit or charger. Lift the handset and press the button again. L In order to set the alarm, you must first set the date and time (page 15).
Error!! Failed Incomplete
Memory full Messages full
No items stored No link to base. Move closer to base, try again.
Please lift up and try again. Please set current date & time.


General use Problem The unit does not work. Cause/solution L Make sure the batteries are installed correctly and fully charged (page 10). L Check the connections (page 9). L Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. L The handset has not been registered to the base unit. Register the handset (page 35). L Confirm the telephone line cord is properly connected (page 9). L Disconnect the unit from the telephone line and connect a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your telephone service provider. L New messages have been recorded. Listen to the new messages (page 28). L New Voice Mail messages have been recorded. Listen to the new Voice Mail messages (page 33).

I cannot hear a dial tone.
The indicator on the top right of the handset flashes slowly.
Programmable settings Problem I cannot program items. Cause/solution L Programming is not possible while either the base unit or another handset is being used. Try again later. L A call is being received. Answer the call and start again after hanging up.
While programming, the handset starts to ring.
Battery recharge Problem I fully charged the batteries, but 7 continues to flash. I fully charged the batteries, but the operating time seems to be short. The handset display is blank. Cause/solution L Clean the charge contacts and charge again (page 11). L The batteries may need to be replaced with a new ones (page 10). L Wipe the battery ends (S, T) and the unit contacts with a dry cloth. L Confirm that the batteries are properly installed. L Fully charge the batteries (page 10, 11).
Making/answering calls, intercom Problem w is displayed, but I cannot make a call. Cause/solution L The handset and base unit could not communicate for some reason, such as interference from other electrical appliances. Perform the following: Move the handset and base unit away from other electrical appliances. Move closer to the base unit. L Move the handset and base unit away from other electrical appliances. L Move closer to the base unit. L If your unit is connected to a telephone line with DSL service, we recommend connecting a noise filter between the base unit and the telephone line jack. Contact your DSL provider for details. L The ringer volume is turned off. Adjust it (page 24). L The dialing mode may be set incorrectly. Change the setting (page 14). L Another handset is in use. Try again later. L Make sure that an optional headset is connected properly (page 38). L Make sure that you have long distance service. L The called handset is too far from the base unit. L The called handset is in use. Try again later.
Static is heard, sound cuts in and out. Interference from other electrical units.
The handset does not ring. I cannot make a call.
I cannot have a conversation using the headset. I cannot make long distance calls. I cannot page the handset.

I cannot operate the answering system.
FCC and other information
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------. If requested, this number must be provided to the telephone company. L Registration No.(found on the bottom of the unit) L Ringer Equivalence No. (REN).0.1B A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with the product. It is designed to be connected to a compatible modular jack that is also compliant. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for the product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Service Center or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions

about what will disable alarm equipment, consult your telephone company or a qualified installer. This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316. When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the offpeak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone.
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If

interference is experienced, move the cordless telephone further away from the TV or VCR. This will often reduce, or eliminate, interference. FCC RF Exposure Warning: L This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. L To comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the product and all persons body (excluding extremities of hands, wrist and feet). L This product may not be collocated or operated in conjunction with any other antenna or transmitter. L The handset may be carried and operated with only the specific provided belt-clip. Other non-tested belt-clips or similar body-worn accessories may not comply and must be avoided.


ENERGY STAR As an ENERGY STAR Participant, Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.


Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) Number of channels: 60 Duplex Channels Frequency range: 1.92 GHz to 1.93 GHz Duplex procedure: TDMA (Time Division Multiple Access) Channel spacing: 1,728 kHz Bit rate: 1,152 kbit/s Modulation: GFSK (Gaussian Frequency Shift Keying) RF transmission power: Approx. 100 mW Voice coding: ADPCM 32 kbit/s Power source: 120 V AC, 60 Hz Power consumption: Base unit: Standby: Approx. 1.8 W Maximum: Approx. 5.0 W Charger: Standby: Approx. 0.7 W Maximum: Approx. 3.5 W Operating conditions: 5 C 40 C (41 F 104 F), 20 % 80 % relative air humidity (dry) Dimensions: Base unit: Approx. 54 mm 122 mm 137 mm (2 1/8 inches 4 13/16 inches 5 3/8 inches) Handset: Approx. 169 mm 49 mm 35 mm (6 21/32 inches 1 15/16 inches 1 3/8 inches)
Charger: Approx. 51 mm 81 mm 91 mm (2 inches 3 3/16 inches 3 19/32 inches) Mass (weight): Base unit: Approx. 220 g (0.49 lb.) Handset: Approx. 140 g (0.31 lb.) Charger: Approx. 70 g (0.15 lb.) Note: L Design and specifications are subject to change without notice. L The illustrations in these instructions may vary slightly from the actual product.

Customer services

Customer Services Directory
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
or, contact us via the web at:
You may also contact us directly at: 1-800-211-PANA (1-800-211-7262), Monday - Friday 9 am to 9 pm; Saturday - Sunday 10 am to 7 pm, EST. TTY users (hearing or speech impaired users) can call 1-877-833-8855.

Accessory Purchases

Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:
or, send your request by E-mail to:
You may also contact us directly at: 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 9 pm, EST.) Panasonic Service and Technology Company 20421 84th Avenue South, Kent, WA 98032 (We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks.) TTY users (hearing or speech impaired users) can call 1-866-605-1277.

Service in Puerto Rico

Panasonic Puerto Rico, Inc. San Gabriel Industrial Park, Ave. 65 de Infantera, Km. 9.5, Carolina, Puerto Rico 00985 Phone (787)750-4300, Fax (787)768-2910


PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 PANASONIC PUERTO RICO, INC. San Gabriel Industrial Park, Ave. 65 de Infantera, Km. 9.5, Carolina, Puerto Rico 00985
Panasonic Telephone Products Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Puerto Rico, Inc. (collectively referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (Limited Warranty period), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor. Parts Labor One (1) Year One (1) Year During the Labor Limited Warranty period there will be no charge for labor. During the Parts Limited Warranty period, there will be no charge for parts. You must mail-in your product prepaid during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new.

Mail-In Service

For assistance in the continental U.S.A. in obtaining repairs please ship the product prepaid to: Panasonic Service and Technology Company Customer Service Center 4900 George McVay Drive Suite B Door #12 McAllen, TX 78503 For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax (787)-768-2910. For Limited Warranty service for headsets if a headset is included with this product please call Panasonic at 1-800-332-5368. When shipping the unit carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached.


To order by phone, call 1-800-332-5368 To order by web, visit Model No Spec Ni-MH : 70AAAx3 Model no for telephone Panasonic KX-TGA230 TGA271 TGA272 TG2352 TG2382 Panasonic KX-FPG378 TG2302 TG2318 TG2336 TG2357 TG2880 TG5213 TG5425 TG5438 TG5480 TG5822 TG6500 TG5653




Ni-MH : 90AAAx3 Capacity 830mAh


FPG379 TG2303 TG2319 TG2343 TG2386 TG5050 TG5230 TG5426 TG5439 TG5543 TG5831 TG6502 TGA520
FPF 391 TG2308 TG2322 TG2344 TG2388 TG5055 TG5240 TG5428 TG5451 TG5561 TG5832 TG5631 TGA523
TG2312 TG2313 TG2314 TG2316 TG2323 TG2326 TG2328 TG2335 TG2346 TG2348 TG2355 TG2356 TG2396 TG2480 TG2488 TG2489 TG5200 TG5202 TG5210 TG5212 TG5243 TG5421 TG5422 TG5423 TG5431 TG5432 TG5433 TG5436 TG5452 TG5453 TG5456 TG5471 TG5566 TG5571 TG5576 TG5821 TG5838 TG5839 TG5861 TG5871 TG5632 TG5634 TG5651 TG5652 TGA550 TGA551 TGA552 TGA650
Ni-MH : 90AAAx2 Capacity 830mAh


Panasonic KX-TG2411 TG2420 TG2421 TG2422 TG2423 TG2424 TG2431 TG2432 TG2433 TG2434 TG2620 TG2621 TG2622 TG2623 TG2624 TG2628 TG2629 TG2631 TG2632 TG2633 TG2634 TG2638 TG2810 TG2811 TG2815 TG2820 TG2822 TG2825 TG2826 TG2831 TG2832 TG2835 TG2836 TG2853 TG2854 TG2873 TG2910 TG2920 TG2922 TG2931 TG2932 TG2935 TG2936 TG5621 TG5631 TG5632 TG5652 TG5672 TG5761 TG5762 TG5766 TG5767 TG5771 TG5776 TG5778 TG5779 TG6700 TG6702 TGA570 TGA571 TGA572 TGA670
Ni-MH : 65AAAx3 Capacity 650mAh
Panasonic KX-TG3021 TG3022 TG3031 TG3032 TG3033 TG3034 TG3510 TG3511 TG3520 TG3521 TG3522 TG3526 TG3531 TG3532 TG3533 TG3536 TG6021 TG6022 TG6023 TG6025 TG6026 TG6031 TG6032 TG6033 TG6034 TG6051 TG6052 TG6053 TG6054 TG6071 TG6072 TG6073 TG6074 TG6075 TGA300 TGA301 TGA351 TGA600 TGA601 KX-GT GT1500 GT1540 GTA150 - IP Phone


Ni-MH : 35AAX3 Capacity 350mAh


Panasonic KX-T3610 T3620 T3640 T3702 T3705 T3710 T3712 T3720 T3725 T3730 T3732 T3800 T3805 T3807 T3822 T3823 T3824 T3825 T3832 T3848 T3850 T3855 T3860 T3870 T3875 T3908 T3910 T3912 T3920 T3925 T3930 T3932 T3935 T3940 T3945 T3950 T3960 T3962 T3965 T3967 T3968 T3980 T4108 T4109 T4168 T4169 T4200 T4300 T4310 T4330 T4340 T4342 T4350 T4360 T4365 T4370 T4400 T4410 T4500 T4550 T4600 TC100 TC109 TC150 TC155 TC157 TC160 TC162 TC162B TC163 TC165 TC170 TC180 TC183 TC185 TC187 TC190 TC197 TC280 TC282 TC289 TC906 TCC106 TCC116 TCC425 TCM410 TCM410-M TCM412 TCM412-B TCM415 TCM417 TCM418 TCM420 TCM422 TCM424 TCM440 TCM440-B
To order by phone, call 1-800-332-5368 To order by web, visit Model No Spec Ni-MH : 35AAX3 Capacity 350mAh Model no for telephone


Fits Cobra, GE, V-Tech, Nortwestern Bell, AT&T Southwestern Bell and SANYO CordlessPhone
Ni-MH : 35AAX3 Capacity 350mAh Fits AT&T, GE, Sears, Sony, Pacific Bell Bell South, Pac.Tel and Mognavox CordlessPhone


Ni-MH : 35AAX2 Capacity 350mAh Panasonic KX-TC1000 TC1000B TC1001 TC1001W TC1002
TC1005 TC1010 TC1040 TC1040W


Ni-MH : 120AAX3 Capacity 1150mAh
Panasonic KX-TG2396 TG2397 TG2400 TG2400B TG2405 TG2500 TG2505 TG2550 TG2560 TG2565 TG2570 TG2575


Ni-MH : 100AAX3 Capacity 1000mAh
Panasonic KX-TG2205 TG2207 TG2215 TG2217 TG2219 TG2227 TG2236 TG2237 TG2239 TG2247 TG2257 TG2267 TG2700 TG2720 TG2730 TG2740 TG2750 TG2770 TG2970 TG2970B TG5100 TG5110 TGA270 TGA273 TGA290 TGA290B TGA510


To order by phone, call 1-800-332-5368 To order by web, visit Model No Spec Ni-MH : 70AAX3 Model no for telephone Panasonic KX-TA38 FPC161 FPC165 FPC166 T800 T3800 T3815 T3821 T3830 T3831 T3835 T3842 T3845 T3880 T3900 TC901 TC904 TC907 TC907B TC911 TC917 TC917HSB TC933 TC933B TC934 TC934B TC935 TC935B TC955RUB TC956RUB TC976RUB TC1400 TC1401 TC1401B TC1403 TC1404 TC1405 TC1408 TC1410 TC1410B TC1413 TC1430 TC1430W TC1431 TC1431W TC1447 TC1447PK TC1450 TC1451B TC1451 TC1457 TC1460 TC1460B TC1460W TC1461 TC1461B TC1481 TC1481B TC1484 TC1493 TC1493CB TC1493CW TC1500 TC1501 TC1501B TC1520 TC1520B TC1503 TC1507 TC1696 TC1700 TC1701 TC1701B TC1703 TC1710 TC1710B TC1711 TC1711B TC1713 TC1720 TC1720B TC1721 TC1721B TC1722 TC1723 TC1731 TC1731B TC1733 TC1733CB TC1740 TC1740B TC1741 TC1741B TC1742 TC1743 TC1750 TC1750B TC1800 TC1800B TC1850 TC1850B TC1867 TC1870 TC1870B TC1890 TC1890B TC9568XB TCM939 TCM939B TCM941 TCM943 TCM944 TCM944B TCM947 TCM947B TCL100B Fits IBM, NorthwesternBell, SONY and Uniden Cordless Phone


Ni-MH : 150AAX3


P-P510A -> Replaced by HHR-P505A
Panasonic KX-TG200 TG200ALB TG200CB TG210 TG210ALB TGM240 TGM240B TC1801 TC1802 TC1805 TC1808 TC1811 TC1812 TC1831 TC1832 TC1851 TC1852 TC1855 TC1858 TC1861 TC1862 TC1863 TC1865 TC1866 TC1867 TC1868 TC1871 TC1872 TC1881 TC1882 TC1886 TC1887 TC1891 TC1892 TG2401 TG2403 TG2451 TG2481 TG2501 TG2502 TG2503 TG2506 TG2551 TG2552 TG2553 TG2559 TG2562 TG2563 TG2564 TG2581 TG2583 TG2584 TG2586 TG2593 TC1801 TC1811B TC1831B TC1851B TC1861B TC1866B TC1871B TC1886B TC1891B
2007.1- REPLACED Ni-MH : 150AAX2 Capacity 1500mAh Panasonic KX-TG2000 TG2000B TG4000 TG4000B TGA200 TGA400 TGA420


NI-cd Capacity 500mAh
Panasonic KX-TG2000 2000B TG4000 4000B


To order by phone, call 1-800-332-5368 To order by web, visit Model No Spec Ni-MH : 150AAX2 Capacity 1500mAh Model no for telephone Panasonic KX-TG2650 TG2670 TG2680 TG2650N TG2670N YG2680N TG2690N


Ni-MH : 160AAX2 Capacity 1500mAh
Panasonic KX-TG2208 TG2214 TG2216 TG2224 TG2226 TG2235 TG2238 TG2248 TG2258


Ni-MH : 70AAX3 Capacity 700Ah
Panasonic KX-T9500 T9505 T9509 T9520 T9550 TC905 TC930


No Data
Ni-MH : 150AAX2 Capacity 1500Ah Panasonic KX-TG1000 TG1050 TGA100 TGA100 TGA420B V Tech VT2431 VT2461 AT&T 2455


Ni-MH : 70AAX3 Capacity 700mAh
Panasonic KX-TC900 TC900B TC900W TC909 TC910 TC910B TC910DB TC914 TC919 TCC902 TCC912 TCC936 TCC942 TCM937 TCM938 TCM940 TCS970


To order by phone, call 1-800-332-5368 To order by web, visit Model No Spec Ni-MH : 150AAX3 Capacity 1500mAh Panasonic Model no for telephone


Ni-MH : 110AAX5 Capacity 1000mAh Panasonic


Ni-MH : 70AAX1 Capacity 700mAh Panasonic KX-TGA101/1034/1033/1032 No Photo



Technical specifications

Product TypeCordless extension handset w/ call waiting caller ID
Body ColorSilver
Phone Features
Cordless Phone StandardDECT
Multi-Handset ConfigurationPhonebook transfer
Dialer TypeKeypad
Dialer LocationHandset
Dialing ModesPulse, tone
Conference Call CapabilityYes
Caller IDYes
Voice Mail CapabilityYes
Call WaitingYes
Call TransferYes
Call HoldYes
Call ScreeningYes
Toll SaverYes
Menu OperationYes
Function ButtonsSpeakerphone button, transfer button, navigator key , intercom button, flash button, pause button, mute button, redial button
Volume ControlYes
Ringer ControlYes
Handset LocatorYes
Additional FunctionsBuilt-in clock, alarm
Additional FeaturesAutotalk
Phone Memory
Phone Directory Capacity50 names & numbers
Dialed Calls Memory5
Caller ID Memory50 names & numbers
TypeLCD display - monochrome
Display LocationHandset
Display InformationBattery status
Display LanguagesEnglish, Spanish
Connections1 x headset jack
TypePhone charging stand + power adapter - external
Battery2 x battery - AAA type
TechnologyRechargeable - nickel metal hydride
Talk TimeUp to 1020 min
Standby TimeUp to 180 h
Dimensions & Weight (Handset)
Width1.9 in
Depth1.4 in
Height6.7 in
Weight4.9 oz
Universal Product Identifiers
Part NumberKX-TGA101S
GTIN00037988477845, 00940356342471, 00840356963426



Phone Portrait CDX-CA750 400SD4 20 DGN GK 1630 IP700wifi MIO Moov Lexmark T644 Crystal CDX-2100 M4410 1100A Uk SPK-HCD 760BF Milano MP26 HTS7540 DEH-P88RS Presario 6000 DV-363-K Voice AH-C260 MG220D CM921 Minox DM1 82-11 Dual IV WFR 2460 Wavestation DMC-FZ20EG E240N Troubleshooting Dslr-A500L PDP2840 CDP-CE505 Ii Plus Crossroads VRS-5100 GR-642tvpf 32PW6322 Z1275 WF7604NAW Motorola Q9H CL-32Z40DS Manual EWZ-108D HQC688 Software KD-G151 EWF1481 B1630N SAE 2800 Batteries Of Xeen P4RD1-MX 997689 Operating Instructions NV-FJ605BR Fantom-X8 39 TDS DVD-HR730 Static HT-Z210 NN-8807 Sagem D66W Cabrio 321 MP-FUB30 Headset Handset Novation XIO AT3220A DMR-BS850EB Marine Gear 8830 PC Thinkpad 770X Seiko SKA RT-950BX CMT-CPX1 EWT19S2 DWL-520 7010IX DXG 305V XES-M50 SCX-4116 DR-770 LV-7215 Serie 45 RDR-HX510 MT-50PM10 Spectrum DI HTS3300 WXI477 Omron JX DCS-3430 V750 PRO L46210L TY-42TM6MA Store Cctv Doro 615R 62840 6015I AR-C160 Singer 50D WL-300G Headset Server


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101