300C TOURING

Note: Information shown is based on data available at time of publication (September 1, 2009). Specifications are valid for Europe and may vary in other international markets. Vehicle model availability may change per individual markets.
Chrysler 300C Touring SPECIFICATIONS
Dimensions are in millimeters (inches) unless otherwise noted.
GENERAL INFORMATION Body Style Assembly Plant Vehicle Segment Five-door touring Magna Steyer, Graz, Austria E-Segment
ENGINE: 3.0-LITER COMMON-RAIL DIESEL (CRD) DOHC 24-VALVE V-6 Availability Type and Description Displacement Bore x Stroke Valve System Fuel Injection Construction Compression Ratio Power Torque Max. Engine Speed Fuel Requirement Oil Capacity Coolant Capacity Emission Controls Optional on 300C Sedan 72-degree, liquid-cooled, turbocharged 2987 cu. cm (182 cu. in.) 83 x 92 mm (3.27 x 3.62) Chain-driven DOHC, 24-valve with hydraulic end-pivot roller rockers Direct injection, sequential with pilot, return type Aluminum-alloy block and bedplate, aluminum-alloy heads, balance shaft 18.0:kW (218 hp DIN) @ 3800 rpm (72.6 hp DIN/L) 510 Nm (375 lb.-ft.) @ rpm 4500 rpm (electronically limited) 49 cetane diesel, DIN EN590 9.5 L (10 qt.) with dry filter 13.2 L (14.0 qt.) Oxy-catalyst, Diesel-particulate Filter (DPF), Lamba sensors, DPF temperature and differential pressure sensor, cooled Exhaust-gas Recirculation (EGR) and internal engine features Euro IV 10.9 L/100 km 6.8 L/100 km 8.3 L/100 km 220 g/km
Emission Class Fuel Consumption Urban Cycle Ex-urban Cycle Combined Cycle CO2 Emissions
Information is current as of September 1, 2009

www.media.chrysler.com

ENGINE: 5.7-LITER HEMI MULTI-DISPLACEMENT V-8 Availability Type and Description Displacement Bore x Stroke Valve System Fuel Injection Construction Compression Ratio Power Torque Max. Engine Speed Fuel Requirement Oil Capacity Coolant Capacity Emission Controls Fuel Consumption Urban Cycle Ex-urban Cycle Combined Cycle CO2 Emissions 18.2 L/100 kmRWD; 18.5 L/100 kmAWD 8.9 L/100 kmRWD; 8.9 L/100 kmAWD 12.3 L/100 kmRWD; 12.5 L/100 kmAWD 292 g/kmRWD; 295 g/kmAWD Optional on 300C Sedan 90-degree V-type, liquid-cooled with Variable-valve Timing (VVT) 5654 cu. cm (345 cu. in.) 99.5 x 90.9 (3.92 x 3.58) Pushrod-operated overhead valves, 16 valves, eight deactivating and eight conventional hydraulic lifters, all with roller followers Sequential, multi-port, electronic, returnless Deep-skirt cast-iron block with cross-bolted main bearing caps, aluminum alloy heads with hemispherical combustion chambers 10.5:kW (360 hp DIN) @ 5150 rpm (63.2 hp DIN/L) 527 Nm (389 lb.-ft.) @ 4250 rpm 5800 rpm (electronically limited) 95 RON unleaded petrol 6.6 L (7 qt.) 13.9 L (14.7 qt.) Dual close-coupled three-way catalytic converters, quad heated oxygen sensors and internal engine features
TRANSMISSION: FIVE-SPEED AUTOMATIC WITH AUTO STICK (W5A580) Availability Description Gear Ratios 1st 2nd 3rd 4th 5th Reverse Final-drive Ratio Overall Top-gear 3.59 2.19 1.0.83 3.17 2.65RWD; 3.06AWD 2.20RWD; 2.54AWD Included with 5.7 L HEMI V-8 Adaptive electronic control, Auto Stick driver-interactive manual control and electronically modulated torque converter clutch
TRANSMISSION: FIVE-SPEED AUTOMATIC WITH AUTO STICK (W5J400) Availability Description Gear Ratios 1st 2nd 3rd 4th 5th Reverse Final-drive Ratio Overall Top-gear 3.59 2.19 1.0.83 3.17 2.65 2.20 Included with 3.0 L CRD Adaptive electronic control, Auto Stick driver-interactive manual control and electronically modulated torque converter clutch

TRANSFER CASE Availability Type Center Differential Torque Split, Front/Rear
Standard with all-wheel drive Active, fully-variable with front-axle disconnect Planetary Fully variable
DIMENSIONS AND CAPACITIES Wheelbase Track, Front Track, Rear Overall Length Overall Width Overall Height Ground Clearance Frontal Area, sq. m (sq. ft.) Fuel Tank Capacity, L (gal.) Curb Weight, kg (lbs.)
3050 (120.0) 1600 (63.0) 1605 (63.1) 5015 (196.8) 1880 (74.1) 1475 (58.0)RWD; 1507 (59.3)AWD (excluding roof rack) 137 (5.4)RWD; 132 (5.2)AWD 2.36 (25.4) 3.0-liter V-6 CRD Engine: 68 L (18 gal.) 5.7-liter V-6 Engine: 72 L (19 gal.) 3.0-liter V-6 CRD Engine: 1935 kg - 2000 kg (4257 4400) 5.7-liter V-8 Engine: 1925 kg - 1990 kg (4235 4378)RWD 5.7-liter V-8 Engine: 2005 kg - 2075 kg (4411 4565)AWD 3.0-liter V-6 CRD Engine: 2360 (5192) 5.7-liter V-8 Engine: 2425 (5335)RWD 5.7-liter V-8 Engine: 2475 (5445)AWD 3.0-liter V-6 CRD Engine: 2000 kg (4400) 5.7-liter V-8 Engine: 1725 kg (3795)RWD/AWD 3.0-liter V-6 CRD Engine: 450 (990) 5.7-liter V-8 Engine: 450 (990) 3.0-liter V-6 CRD Engine: 96 (211) 5.7-liter V-8 Engine: 85 (187) 68 (150)
Gross Vehicle Weight, kg (lbs.)
Maximum Trailer Mass (braked), kg (lbs.) Maximum Trailer Mass (unbraked), kg (lbs.) Maximum Tongue Load, kg (lbs.) Maximum Roof Rack Load, kg (lbs.)
(d) All dimensions measured at curb weight with standard tires.
ACCOMMODATIONS Seating Capacity, F/R Front Head room Leg room Shoulder room Hip room Seat travel Recliner angle range Rear Head room Leg room Knee clearance Shoulder room Hip room Volume, cu. m (cu. ft.) DIN Cargo Volume, L (cu. ft.) 966 (38.0) 1024 (40.3) 171.8 (6.76) 1466 (57.7) 1421 (55.9) 1.43 (50.6) 630 L (22.2)Rear seat up 2026 L (56.6)Rear seats folded 942 (37.0) 1024 (40.3) 1510 (59.4) 1402 (55.1) Driver270 (10.6), passenger220 (8.66) Driver70, passenger69 2/3
BODY Layout Construction Longitudinal front engine, rear-wheel drive or all-wheel drive Steel unibody
SUSPENSION Front Independent SLA with high upper A arm, coil spring over gas-charged shock absorbers and stabilizer bar. Lateral and diagonal lower links with dual ball joint knuckle Five-link independent with coil springs, gas-charged shock absorbers and isolated suspension cradle with rear-stabilizer bar

300C TOURING SRT8

Note: Information shown is based on data available at time of publication (September 1, 2009). Specifications are valid for Europe and may vary in other international markets. Vehicle model availability may change per individual markets.
Chrysler 300C Touring SRT8 SPECIFICATIONS
Dimensions are in millimeters (inches) unless otherwise noted.
GENERAL INFORMATION Body Style Assembly Plant Vehicle Segment ENGINE: 6.1-LITER HEMI V-8 Availability Type and Description Displacement Bore x Stroke Valve System Fuel Injection Construction Compression Ratio Power Torque Max. Engine Speed Fuel Requirement Oil Capacity Coolant Capacity Emission Controls Emission Class Fuel Consumption Urban Cycle Ex-urban Cycle Combined Cycle 21.1 L/100 km 10.1 L/100 km 14.1 L/100 km Standard 90-degree V-type, liquid-cooled 6059 cu. cm (370 cu. in.) 103.0 x 90.9 (4.06 x 3.58) Pushrod-operated overhead valves, 16 valves, 16 conventional hydraulic lifters, all with roller followers Sequential, multi-port, electronic, returnless Deep-skirt cast-iron block with cross-bolted main bearing caps, aluminum alloy heads with hemispherical combustion chambers 10.3:kW (431 hp DIN) @ 6000 rpm (70.6 hp DIN/L) 569 Nm (420 lb.-ft.) @ 4600 rpm 6200 rpm (electronically limited) 95 RON unleaded petrol 6.6 L (7 qt.) 13.25 L (14 qt.) Dual close-coupled three-way catalytic converters, quad heated oxygen sensors and internal engine features Euro IV
Five-door touring Magna Steyer, Graz, Austria E-Segment
Information is current as of September 1, 2009

www.media.chrysler.com

TRANSMISSION: FIVE-SPEED AUTOMATIC WITH AUTO STICK (W5A580) Availability Description Standard Adaptive electronic control, performance-tuned Auto Stick driverinteractive manual control and electronically modulated torque converter clutch 3.59 2.19 1.0.83 3.16 3.06 2.54
Gear Ratios 1st 2nd 3rd 4th 5th Reverse Final-drive Ratio Overall Top-gear DIMENSIONS AND CAPACITIES Wheelbase Track, Front Track, Rear Overall Length Overall Width Overall Height Ground Clearance Frontal Area, sq. m (sq. ft.) Fuel Tank Capacity, L (gal.) Curb Weight, kg (lbs.) Gross Vehicle Weight, kg (lbs.) Maximum Trailer Mass (braked), kg (lbs.) Maximum Trailer Mass (unbraked), kg (lbs.) Maximum Tongue Load, kg (lbs.)
3050 (120) 1600 (63.0) 1605 (63.2) 5015 (197.4) 1880 (74.0) 1462 (57.6) 131 (5.2) 25.8 (2.4) 72 (19) (4321 4409) 2365 (5214) 1725 (3795) 450 (990) 173 (380)
(d) All dimensions measured at curb weight with standard tires.
ACCOMMODATIONS Seating Capacity, F/R Front Head room Leg room Shoulder room Hip room Seat travel Recliner angle range 942 (37.1) 1024 (40.3) 1510 (59.4) 1402 (55.2) Driver270 (10.6), passenger220 (8.66) Driver70, passenger69 2/3
Rear Head room Leg room Knee clearance Shoulder room Hip room DIN Cargo Volume, L (cu. ft.) 966 (38.0) 1020 (40.2) 171.8 (6.8) 1466 (57.7) 1420 (55.9) 630 (22.2) Rear seats up 1602 (56.6) Rear seats folded
BODY Layout Construction SUSPENSION SRT-tuned Front and Rear Front Rear Independent; SLA with tall spindle, dual lower ball joint, upper and lower A arms, coil springs, monotube shocks Independent 5 link with aluminum knuckle, coil springs, monotube shocks, anti-roll bar Longitudinal front engine, rear-wheel drive Steel unibody