home time (TIME), home time alarm (ALM1), stopwatch (STW) and countdown timer (TMR). To change from one display mode to another, press the S3 button once. The mode description will appear for two seconds before activating the selected mode.

HOW TO DISPLAY THE DATE

To display the date, press S1 when the time is displayed. Press the button again to go back to time display. The watch will also do so automatically after six seconds.

SHARK CLASSIC MID

FEATURES:
CURRENT TIME DAY/MONTH/DATE TWO DAILY ALARM HOURLY CHIME STOPWATCH OPTIONAL 24-HR. TIME WATER RESISTANT TO 300FT/100M NIGHT VISION BACK LIGHT
HOW TO SET THE DAILY ALARMS
1 Select alarm function using the S3 button. 2 Select home and foreign time alarm using the S2 button. 3 Hold the S2 button for two seconds. The SET message will appear. The minute digits will blink. 4 Use the S1 button to set the minutes. 5 Press the S3 button. The hour digits will blink. 6 Use the S1 button to set the hours. 7 Press the S2 button to confirm and exit.
Press the S1 button once to start the stopwatch. The watch will start counting from 00'00''00 if the watch is cleared. Otherwise, it will pick up from where it last left off. The watch will count up to 59 minutes and 59.99 seconds before starting from zero again. To stop counting, press the S1 button once. Press the button again to resume from where it left off. To clear the stopwatch, press the S1 button to stop counting and then press the S2 button.
FOLLOW THESE 8 TIPS TO GET THE MOST OUT OF YOUR NEW WATCH!
1. Never Pull out the crown or operate the pushers/buttons under water. 2. Make sure your crown is returned to the original position before you expose your watch to water. 3. If your watch is exposed to saltwater it is very important to wash it thoroughly under tap water and wipe dry with a soft cloth. Keep it clean! 4. Sever impacts or drops may affect your watches water resistance and performance. 5. Avoid exposing your Freestyle watch to extreme temperatures such as in a hot shower, Jacuzzi, sauna or hot tub. The combination of extreme heat and water may cause your watch to lose some of its water resistance. 6. Avoid exposing your watch to chemicals, soaps or solvents as they deteriorate the water resist seals in your watch. 7. Never try to remove the caseback, leave this to a certified watch repair technician or Freestyle service center. This will help in preventing water leakage from improper battery replacement. 8. It is advisable to have your watch pressure tested annually and to re-furbish your watch every 2-3 years to extend the life of the watch.
LIMITED LIFETIME WARRANTY Freestyle U.S.A. warrants, to the original purchaser, that its watches are free from defects in materials and workmanship for the lifetime of the watch (under normal use) from date of original purchase. The following are not covered under warranty: battery, strap/bracelet/ band and crystal. Accidental breakage or damage due to normal wear or misuse of the product, including but not limited to the mathematical accuracy of the product, is not covered under this warranty. Some states do not allow limitations on how long an implied warranty lasts, or the exclusions of or limitations on consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights, which vary from state to state. Under this warranty FREESTYLE will make any necessary repairs, if applicable, at no cost to you the consumer. Any repair needed that is not under warranty will be at the cost of you the consumer. Proof of purchase and / or original receipt it needed to validate your warranty. Your warranty is voided by any servicing out by a non-authorized agent. Any other form of guarantee to you by the retailer is his / her responsibility. This warranty applies to watches purchased in the United States. For watches purchased outside the United States, please contact you authorized FREESTYLE dealer for warranty information.

HOME AND FOREIGN DISPLAY

To display the foreign time, press S2 when the home time is displayed. The mode description (TM-2) will appear shortly before the foreign time is displayed. To change back to the home time, press S2. To display the daily alarm for foreign time, press S2 when the daily alarm for home time is displayed. The mode description (ALM 2) will appear shortly before the foreign time alarm is displayed.
The stopwatch is equipped with a split function for you to keep track of individual lap time. To use the function, 1 While the stopwatch is running, press the S2 button once whenever you want to register a lap. The stopwatch is still running in the background. To display the currently accumulated time, press the S2 button. 2 Repeat the last step until you have registered all the laps. 3 Press S1 to stop counting. Press the button again to resume or press the S2 button to clear. Note: You can leave the stopwatch running while switching over to other operating modes. The STW indicator will light up as a reminder.

KEY TO SYMBOLS

HOW TO SET THE TIME AND DATE
1 Select time display using the S3 button. Select home time or foreign time using the S2 button. Hold the S2 button for two seconds. The SET message will appear momentarily. The second digits will blink. Press the S1 button to reset the second digits to 00. Press the S3 button. The minute digits will blink. Use the S1 button to set the minutes. Press the button once to increase the digits by one unit or speed up the process by holding down the button. Press the S3 button. The hour digits will blink. Use the S1 button to set the hours. Follow the same pattern to set the day-of-the-month,month, day-ofthe-week, hour format and date format.For the hour format, you can choose 12-hour display with P indicator or 24-hour display. As for the date format, you can choose M-D (month-day) or D-M (daymonth). The chosen formats will apply to both home and foreign settings.
HOW TO USE THE DAILY ALARMS AND HOURLY CHIMES
To display the alarm time, select ALM 1 or ALM 2 mode using the S2 button in alarm mode. Use the S1 button to set the status of the alarm and chime functions of the chosen alarm. Press the button once to activate the daily alarm. Press the button again to activate the hourly chime. Press the button a third time to activate both functions. To deactivate both, press the S1 button a fourth time. The chime and alarm indicators will appear when their respective functions are active.

HOW TO USE THE TIMER

INTRODUCTION
Congratulations on your purchasing the Easy-Set Watch II. Designed for easy operation, the watch automatically tells you which button to use in a setting procedure. The watch has the following functions: Real-time calendar clock for home time Second calendar clock for foreign time Dual daily alarms and hourly chimes Stopwatch with split function 10 preset countdown timers
To set the count down time, 1 Select timer mode using the S3 button. The last selected timer setting will be displayed. 2 Use the S2 button to alter the setting. You can select among 1, 3, 5, 10, 15, 20, 25, 30, 45 and 60 minutes. To start a countdown, press the S1 button. Press the button again to stop the countdown or a third time to resume from where it left off. After reaching zero on a countdown, a 20-second beep will go off. To stop the beeping, press any button. The timer will reload automatically.

WHEN AN ALARM OR HOURLY CHIME GOES OFF
A tune will go off by the hour if the hourly chime function is activated and a 20-second alarm tune will be emitted at the designated time when the alarm is active. To stop either tune, press any button. To disable the functions, select ALM 1 or ALM 2 and use S1 button to turn off the indicator of the function as desired.
The watch is also equipped with an EL back light to facilitate time reading at night or in dim light.

BATTERY INFORMATION

The watch uses a 3.0V lithium button cell battery, which in normal circumstances will be good for 1-2 years. However, the battery life will vary due to shelf time and the manner the watch is used.

HOW TO USE THE STOPWATCH

For a straight forward count-up, 1 Select stopwatch mode using the S3 button. The last recorded time of the stopwatch will be displayed.Press the S2 button to clear the old record.
HOW TO USE THE BACK LIGHT
Press the LIGHT button once to turn on the back light for three seconds.
10 Press the S2 button to confirm the settings and return to current time display.

DISPLAY MODES

The watch has four display modes:
Please send to the address below and include the following (w/ the form included on either this page or the flipside) 1) A copy of your original sales receipt 2) Your printed name, address, phone number and a brief description of the problem. 3) A Check, Money Order payable to Freestyle USA in the amount of $8.50 for processing and handling. If using a Credit Card, be sure to include card number and expiration date on included form.
Attn: Individual Returns 47-50 33rd Street Long Island City, NY 11101 1-888-222-5230 ext.502 1-888-222-5230 ext.502 Battery $ 4.00 Case 10.00 Bezel 6.00 Band(Polyurethane) 12.00 Band(Leather) 12.00 Band(Metal) 20.00 Band(Nylon) 7.00 Processing and handling 8.50 Total $ Check or Money Order Master Card Visa

www.freestyleusa.com

FREESTYLE Attn: Individual Returns 47-50 33rd Street Long Island City, NY 11101 1-888-222-5230 ext.502 www.freestyleusa.com

Should the warranty on your watch no longer be valid or found to be voided, please see the enclosed mailing form (on this page or flipside) for replacement costs per item. Please do not include any special watchband or any other items of personal value in your shipment. Allow 30 days for processing and the return of your serviced watch.
Card # Exp Date Name Adress

Phone #

Signature

visit our site

SHARK CLASSIC MID-02

(ALM1), stopwatch (STW) and countdown timer (TMR). To change from one display mode to another, press the S3 button once. The mode description will appear for two seconds before activating the selected mode.
watch will also do so automatically after six seconds.
HOW TO SET THE DAILY ALARMS
3 Select alarm function using the S3 button. Select home and foreign time alarm using the S2 button. Hold the S2 button for two seconds. The SET message will appear. The minute digits will blink. Use the S1 button to set the minutes. Press the S3 button. The hour digits will blink. Use the S1 button to set the hours. Press the S2 button to confirm and exit. 3
up from where it last left off. The watch will count up to 59 minutes and 59.99 seconds before starting from zero again. To stop counting, press the S1 button once. Press the button again to resume from where it left off. To clear the stopwatch, press the S1 button to stop counting and then press the S2 button.
TWO YEAR LIMITED WARRANTY
FOLLOW THESE 8 TIPS TO GET THE MOST OUT OF YOUR NEW WATCH! Your Freestyle watch is warranted to be free of defects in materials or workmanship, under normal use, for a period of two years from the date of purchase. This limited warranty excludes damage resulting from improper care or handling, accidents, modification, unauthorized repairs, normal wear, or other causes which are not defects in materials and workmanship. If your watch is defective, please send your watch to the address below and include the following: 1. A copy of your original receipt 2. The completed and signed Repair Form 3. A money order payable to Odyssey Time Inc. in the amount of $8.50 for processing and handling. If using a credit card; be sure to include the name on the card, the card number and the expiration date Odyssey Time Inc 30 East Pearce Street Richmond Hill, Ontario Canada, L4B 1B7 service@seikocan.com Tel: 1-800-668-6571 905-763-1066 Please do not include any items of personal value in your shipment. If there is a covered defect, we will at our option repair the defective part(s), or replace the watch with the same product (if available) or a similar product of equal price. We reserve the right to refuse either repair or replacement (but not both) if the cost of doing so would be disproportionate to the defect. This limited warranty is in place of all other express and implied warranties of any kind, which are hereby excluded. In no event shall Freestyle be liable for direct, indirect, incidental or consequential damages arising out of the use of the watch, and any recovery limited to the purchase price. No other person or company is authorized to change this limited warranty, and your dealer is solely responsible for any other warranties. For non-warranty service, contact the address below. The Freestyle warranty extends only to product purchased from an authorized Freestyle retailer.

SHARK CLASSIC

FEATURES:
CURRENT TIME DAY/MONTH/DATE TWO DAILY ALARM HOURLY CHIME STOPWATCH OPTIONAL 24-HR. TIME WATER RESISTANT TO 300FT/100M NIGHT VISION BACK LIGHT

1. Never Pull out the crown or operate the pushers/buttons under water. 2. Make sure your crown is returned to the original position before you expose your watch to water. 3. If your watch is exposed to saltwater it is very important to wash it thoroughly under tap water and wipe dry with a soft cloth. Keep it clean! 4. Sever impacts or drops may affect your watches water resistance and performance. 5. Avoid exposing your Freestyle watch to extreme temperatures such as in a hot shower, Jacuzzi, sauna or hot tub. The combination of extreme heat and water may cause your watch to lose some of its water resistance. 6. Avoid exposing your watch to chemicals, soaps or solvents as they deteriorate the water resist seals in your watch. 7. Never try to remove the caseback, leave this to a certified watch repair technician or Freestyle service center. This will help in preventing water leakage from improper battery replacement. 8. It is advisable to have your watch pressure tested annually and to re-furbish your watch every 2-3 years to extend the life of the watch.

HOME AND FOREIGN DISPLAY

To display the foreign time, press S2 when the home time is displayed. The mode description (TM-2) will appear shortly before the foreign time is displayed. To change back to the home time, press S2. To display the daily alarm for foreign time, press S2 when the daily alarm for home time is displayed. The mode description (ALM 2) will appear shortly before the foreign time alarm is displayed.
The stopwatch is equipped with a split function for you to keep track of individual lap time. To use the function, 1 While the stopwatch is running, press the S2 button once whenever you want to register a lap. The stopwatch is still running in the background. To display the currently accumulated time, press the S2 button. Repeat the last step until you have registered all the laps. Press S1 to stop counting. Press the button again to resume or press the S2 button to clear.
KEY TO SYMBOLS HOW TO SET THE TIME AND DATE
3 Select time display using the S3 button. Select home time or foreign time using the S2 button. Hold the S2 button for two seconds. The SET message will appear momentarily. The second digits will blink. Press the S1 button to reset the second digits to 00. Press the S3 button. The minute digits will blink. Use the S1 button to set the minutes. Press the button once to increase the digits by one unit or speed up the process by holding down the button. Press the S3 button. The hour digits will blink. Use the S1 button to set the hours. Follow the same pattern to set the day-of-the-month,month, day-ofthe-week, hour format and date format.For the hour format, you can choose 12-hour display with P indicator or 24-hour display. As for the date format, you can choose MD (month-day) or D-M (day-month). The chosen formats will apply to both home and foreign settings.
HOW TO USE THE DAILY ALARMS AND HOURLY CHIMES
To display the alarm time, select ALM 1 or ALM 2 mode using the S2 button in alarm mode. Use the S1 button to set the status of the alarm and chime functions of the chosen alarm. Press the button once to activate the daily alarm. Press the button again to activate the hourly chime. Press the button a third time to activate both functions. To deactivate both, press the S1 button a fourth time. The chime and alarm indicators will appear when their respective functions are active. 2 3

Note: You can leave the stopwatch running while switching over to other operating modes. The STW indicator will light up as a reminder.

HOW TO USE THE TIMER

To set the count down time, 1 Select timer mode using the S3 button. The last selected timer setting will be displayed. 2 Use the S2 button to alter the setting. You can select among 1, 3, 5, 10, 15, 20, 25, 30, 45 and 60 minutes.

INTRODUCTION

Congratulations on your purchasing the Easy-Set Watch II. Designed for easy operation, the watch automatically tells you which button to use in a setting procedure. The watch has the following functions: Real-time calendar clock for home time Second calendar clock for foreign time Dual daily alarms and hourly chimes Stopwatch with split function 10 preset countdown timers The watch is also equipped with an EL back light to facilitate time reading at night or in dim light.
WHEN AN ALARM OR HOURLY CHIME GOES OFF
A tune will go off by the hour if the hourly chime function is activated and a 20second alarm tune will be emitted at the designated time when the alarm is active. To stop either tune, press any button. To disable the functions, select ALM 1 or ALM 2 and use S1 button to turn off the indicator of the function as desired.
To start a countdown, press the S1 button. Press the button again to stop the countdown or a third time to resume from where it left off. After reaching zero on a countdown, a 20-second beep will go off. To stop the beeping, press any button. The timer will reload automatically.

HOW TO USE THE STOPWATCH

For a straight forward count-up, 1 Select stopwatch mode using the S3 button. The last recorded time of the stopwatch will be displayed.Press the S2 button to clear the old record. Press the S1 button once to start the stopwatch. The watch will start counting from 00'00''00 if the watch is cleared. Otherwise, it will pick
HOW TO USE THE BACK LIGHT
Press the LIGHT button once to turn on the back light for three seconds.
10 Press the S2 button to confirm the settings and return to current time display.

BATTERY INFORMATION

The watch uses a 3.0V lithium button cell battery, which in normal circumstances will be good for 1-2 years. However, the battery life will vary due to shelf time and the manner the watch is used.
HOW TO DISPLAY THE DATE DISPLAY MODES
The watch has four display modes: home time (TIME), home time alarm To display the date, press S1 when the time is displayed. Press the button again to go back to time display. The

REPAIR FORM

30 East Pearce Street Richmond Hill, Ontario Canada, L4B 1B7 Money Order Master Card Visa Name: _______________________ Address: ______________________ ______________________________ ______________________________ ______________________________ ______________________________ Telephone: _____________________

1-888-222-5230 ext.502

Credit Card Information
Credit Card Number: ______________________________ Name on Credit Card: ______________________________ Expiration Date: ______________________________ Signature: ______________________________

visit our site

www.freestyleusa.com

SHARK CLASSIC-02