CAUTION: Changes or modifications not expressly approved by Motorola for compliance could void the users authority to operate the equipment.

Canadian Compliance

This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Cet appareil numrique de la classe B respects toutes les exigences du Rglement sur le matriel brouilleur du Canada.
FCC Declaration of Conformity
Motorola, Inc., Broadband Communications Sector, 101 Tournament Drive, Horsham, PA 19044, 1-215-323-1000, declares under sole responsibility that the WR850G, WE800G, WA840G, and BR700 comply with 47 CFR Parts 2 and 15 of the FCC Rules as a Class B digital device. This device complies with Part 15 of FCC Rules. Operation of the device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. Copyright 2003 Motorola, Inc. All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation or adaptation) without written permission from Motorola, Inc. Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. Motorola provides this guide without warranty of any kind, either implied or expressed, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Motorola may make improvements or changes in the product(s) described in this manual at any time. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Microsoft, Windows, Windows Me and Windows XP are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft Windows screen shots are used by permission of Microsoft Corporation. Wi-Fi is a registered trademark of Wireless Ethernet Compatibility Alliance, Inc. All other product or service names are the property of their respective owners. Motorola, Inc. 2003.

Contents

Section 1:Overview
Features.... 1-3 Understanding Your User Guide... 1-4 Box Contents.... 1-5 Wireless Connections... 1-5 Access Point...1-5 LAN1-5 TCP/IP.....1-6
Static IP Address....1-6 Dynamic IP Address....1-6 Technical Specifications...1-8
Positioning Your Access Point... 1-7 Wireless Range....1-7 Type of Networks... 1-9 Access Point Mode....1-9 WDS Access Point Mode...1-9 Access Point Physical Description.. 1-10 Back of Access Point....1-10 Front of Access Point...1-11 LED Description...1-12

Ethernet Cable

CD-ROM

Base Station Stand

Power Supply

Quick Start Guide

Wireless Connections

Before installing your wireless access point, please take a few minutes to review the wireless networking functions described in this section.

Access Point

Generally, access points wirelessly connect networks together, such as your network with the Internet. Or, by configuring multiple clients such as laptops, each using their own access point, you are able to create your own private wireless Ad-Hoc network.
Local Area Network. A local area network provides a full-time, high-bandwidth connection over a limited area such as a home, building, or campus. Ethernet is the most widely used LAN standard. WA840G 1-5

TCP/IP

Transmission Control Protocol/Internet Protocol (TCP/IP) comprises the backbone of the Internet. IP moves packets of data between nodes while TCP verifies delivery from client to server. The device you hook up to your wireless access point will identify itself with an IP address so that the network will know where to retrieve and deposit requested information. Static IP Address A static IP address is a fixed address that is assigned manually to a device on the network. Static IP addresses must be unique and cannot be shared, therefore they are used in situations where the address should never change, like print servers or PC servers. Dynamic IP Address A dynamic IP address is a temporary IP number, dynamically or randomly generated by a DHCP server. The address lasts only as long as the server allots, usually in the space of a day or two. When the IP address expires, the client is automatically reassigned a new IP address, ensuring smooth communication.
Positioning Your Access Point
To achieve the best wireless performance, review these guidelines before deciding where to place your access point: ! Placing your base station in the physical center of your network is the best location because the antenna sends out the signal in all directions. Placing the access point in a higher location, such as on top of a cabinet, helps to disperse the signal cleanly, especially to receiving locations on upper stories. If possible, position your access point so there is a direct line of sight between the access point and your other home network devices. Avoid placing the access point next to large solid objects like computer cases, monitors, walls, fireplaces, etc. This helps the signal penetrate more cleanly. Other wireless devices like televisions, radios, microwaves and 2.4 GHz cordless telephones can interfere with the signal. Keep devices away from the access point. Mirrors, especially silver-coated, can reduce transmission performance.

Wireless Range

The following describes different scenarios for the expected range of the coverage area of the access point. This table is only a guide and coverage varies due to local conditions. Data Rate 54 Mbps 11 Mbps 5.5 Mbps 2 or 1 Mbps Open Area Up to 100 ft (30m) Up to 900 feet (275 m) Up to 1300 feet (396 m) Up to 1500 feet (457 m) Closed Area Up to 60 ft (18m) Up to 160 feet (49 m) Up to 200 feet (61 m) Up to 300 feet (91 m)

Technical Specifications

Your wireless access point uses a radio transmission technology defined by the Institute of Electrical and Electronics Engineers (IEEE) called 802.11 or Wi-Fi (Wireless Fidelity). This standard is subdivided into distinct categories of speed and the frequency spectrum used, designated by the lower case letter after the standard. For example, your access point supports both the b and g specifications. The 802.11b specification transmits data rates up to 11 Mbps while the 802.11g specification transmits data rates up to 54 Mbps. These are theoretical speeds so your performance may vary. The radio waves radiate out in a donut-shaped pattern. The waves travel through walls and floors, but transmission power and distance are affected. The theoretical distance limit is 1,000 feet (305 meters), but actual throughput and distance varies. Both standards operate in the 2.4 GHz range, meaning other electrical appliance also might interfere with the access point televisions, radios, microwave ovens, and 2.4 GHz cordless telephones. Thus positioning your access point where it encounters the least interference gains the greatest benefit to maintaining a quality connection.

Type of Networks

Your access point can be used in several ways. The following examples illustrate the flexibility of your WA840G. Some examples require additional hardware.

Access Point Mode

In this mode, the WA840G connects wireless clients to a wired Ethernet network. This example shows the most likely use for the access point, because it shares an Internet connection with your laptop or other wireless client.

Condition ON Blinking

Color Green Green

Status The device is powered on and operating normally. Firmware update is in progress. The power LED turns RED as soon as the reset button is depressed. If the reset button is held down for more than 5 seconds, the LED starts to blink during which the access points default user name, password and IP address will be restored. The LED then turns OFF until the reset button is released. The power LED blinks RED if the firmware is corrupted indicating the firmware needs to be restored. No mobile station or access point has been associated with this device. The wireless interface has been disabled by the firmware. 802.11b/802.11g connection exists in this wireless domain/active traffic present. No external Ethernet device has been attached and detected. The Ethernet link is down. 100BaseT link detected/active traffic present.

Blinking/ON Red

2 Wireless

OFF ON

None Red
ON/Blinking Green 3 Device OFF None
ON/Blinking Amber 10BaseT link detected/active traffic present. ON/Blinking Green
To get your network up and running: ! ! Set up your hardware. Insert the CD-ROM for Software Setup. Follow the prompts.
If you prefer to set up the access points software manually, refer to the Manual Software Setup found in this section. The following sections provide detailed instructions for completing these tasks.

Hardware Setup

Hardware setup includes: ! ! ! Antenna Installation: verifying the antenna is connected to the access point. Physical Installation: where you physically place your access point. Electrical Connection: how to power your access point.

Antenna Installation

When shipped, the antenna is connected to the access point. If for some reason you need to detach and reattach the antenna to the main access point: Locate the antenna threaded knob on the back of the access point. To remove the antenna, unscrew the antenna connector counter-clockwise

SECTION 2

INSTALLATION
To reattach the antenna, screw the antenna connector clockwise on to the threaded knob until firmly seated. Do not overtighten.
Access Point Physical Installation
You can install the access point horizontally or vertically. The access point can also be mounted on a wall. Horizontal Installation
Place the access point in the desired location and follow the procedures below for connecting and configuring the access point.

Vertical Installation

Insert the access point into the supplied base. Ensure that the antennas location is on top. The access points foot slides snugly into the base to keep the access point stable. Follow the installation procedures for connecting and configuring the access point.
Wall Mount Installation If you mount the access point on the wall, you must: ! Position the access point as specified by the local or national codes governing residential or business communications services. Follow all local standards for installing a network interface unit/network interface device (NIU/NID).

If possible, mount the access point to concrete, masonry, a wooden stud, or other solid wall material. Use anchors when necessary; for example, if you must mount the access point on drywall.
To mount your access point on the wall: 1
Print the Wall Mounting Template shown on this page:

3.15 [80.00mm]

MODEL WA840G INPUT VOLTAGE: +5VDC, 2A FCC ID: F2NWA840G PART NUMBER: AAAAAA-BBB-CC S/N: PPPPMMYJJJSSSSSCAABBCCCC

MODEL: WA840G

Tested To Comply With FCC Standards
WIRELESS MAC: AB CD EF 45

FOR HOME OR OFFICE USE

MADE IN TAIWAN
The illustration is drawn at a one-to-one scale, which means that when printed, it provides the exact dimensions required to mount the access point.
Click the Print icon or choose Print from the File menu to display the Print dialog box:
In both the Pages from and to fields, enter the page number on which the Wall Mounting Template appears. Be sure you print the template at 100% scale and that Fit to page is not checked in the Print dialog box. Click OK. Measure the printed template with a ruler to ensure that it is the correct size. Use a center punch to mark the center of the holes on the wall. On the wall, locate the marks for the mounting holes you just made.

WARNING!

Before drilling holes, check the structure for potential damage to water, gas, or electric lines.
Drill the holes to a depth of at least 3.8 cm (1 inches).
If necessary, seat an anchor in each hole. Use M5 x 38 mm (#10-16 x 1 inch) screws with a flat underside and maximum screw head diameter of 10.5 mm to mount the access point. Using a screwdriver, turn each screw until part of it protrudes from the wall, as shown: ! ! There must be 4.0 mm (.16 inches) between the wall and the underside of the screw head. The maximum distance from the wall to the top of the screw head is 7.6 mm (.3 in).
7.6 mm (.3 inches) maximum
10.5 mm (.4 inches) maximum 4.0 mm
10 Remove the front two plastic feet, nearest to the LED panel, from the bottom of the access point to uncover the keyholes. 11 Place the access point so the keyholes are above the mounting screws. 12 Slide the access point down until it stops against the top of the keyhole opening. 13 Follow the installation procedures for connecting and configuring the access point.

The default setting is motorola appended with the last 3 characters of the Wireless MAC address (an example SSID: motorola 345) and that no encryption and authentication are enabled. To configure the initial settings of the access point, please see Configure your Computers.

Configure Your Computers

For initial configuration, you need to configure the PCs network setting to specify a static IP address for the computer that is going to communicate with the access point. After initial configuration: If Using DHCP Not using DHCP Then Reconfigure the PCs settings to Obtain An IP Address Automatically. Continue to use the Static IP settings.
This section includes information on configuring computers with the following operating systems: ! ! ! ! Windows 98SE Windows ME

Windows 2000 Windows XP

Determine the operating system for each computer you will include in your wireless network and follow the steps to configure the network settings for that PC.
Configuring Windows 98SE and ME
3 Click Start. Select Settings > Control Panel.
Double-click Network. The Network window is displayed:
On the Configuration tab, select the TCP/IP line the for the appropriate Ethernet adapter on your PC. There may be multiple adapters installed choose only the one that is configured for your adapter. In the example above, a 3Com Ethernet adapter card is installed and is the appropriate choice.
Click Properties. The TCP/IP Properties window is displayed:
Click the IP Address tab. Enter 192.168.40.10 in the IP Address field. Enter 255.255.255.0 in the Subnet Mask field. Click OK.
10 Click the Gateway tab and confirm that the Installed Gateway field is blank. 11 Click OK twice. Windows may ask for the Windows Installation disk. First check to see if the installation files are installed at c:\windows\options\cabs. Otherwise, load your Windows CD and follow the prompts. 12 Restart your computer to save your settings. 13 Proceed to the Configure Your Wireless Settings section to set up the security settings.

Configuring Windows 2000

5 Click Start. Select Settings. Select Control Panel. Double-click Network and Dial-Up Connections. Double-click Local Area Connection.

Click Properties.

Ensure the box next to Internet Protocol (TCP/IP) is selected. Click to highlight Internet Protocol (TCP/IP) and click Properties.

Logout

Logs out of the access points Configuration Utility.
Configuring Wireless Network Settings
The Wireless Network screens allow you to adjust settings for your wireless connection:

! ! ! !

Basic Security Site Monitor Advanced
Basic Wireless Configuration
The Wireless Basic screen allows you to set up your Service Set Identifier (SSID) parameters for your network. The SSID is the name of your network that is shared among all the devices in a wireless network. Although your access point has a default SSID, it is recommended that you change it to a name that is easy for you to remember. To access the screen, click Wireless > Basic.
Field or Button Network Name (SSID)
Description Enter a name of no more than 32 alphanumeric characters. This SSID must be entered on every wireless device on your wireless network to communicate back to the router. The default SSID is motorola XXX, where XXX are the last 3 characters of your Wireless MAC address, found on the label on the bottom of the unit.
Field or Button Channel Number
Description Identifies the channel on which the access point communicates. Each wireless client must use the same channel to enable communication. If changed wirelessly, once you restart the access point, you will lose your wireless connection. Change the wireless devices channel to the new channel to log back into the access point. The default is Channel 11.

Operation Mode

Enables you to select the type of transmission protocol your wireless network uses. The options are: ! ! ! Compatibility (802.11b/g) default setting Performance (802.11g only) Legacy (802.11b only)
Wireless MAC Address Apply Cancel
Displays the MAC address of the unit. Click to save your settings. Click to cancel any changes.
Configuring Wireless Security Settings
The Wireless Security screen allows you to configure wireless security settings. To access the screen, click Wireless > Security.

Field SSID Broadcast

Description Service Set Identifier (SSID). Broadcasts the SSID of the access point to devices on your network. This enables wireless clients, such as a laptop, to receive the access points SSID. If you dont want the SSID to be broadcast, disable this feature. The default is enabled.

Field ESS Authentication

Description Extended Service Set (ESS). Authentication establishes either an open or secure verification of communication with an access point. This setting does not encrypt your wireless transmission. The options are: Open System Pre-Shared Key (PSK) WPA No authentication is used. Default setting. The Pre-Shared Key (PSK) authentication method is used. Wi-Fi Protected Access (WPA) authentication (802.1X) is used with an EAP type. WPA authentication (802.1X) is used with a pre-shared key.

Click to save your settings. Click to cancel any changes.
Configuring Control Panel Settings
The Control Panel screens enable administrative maintenance for your access point, such as changing your login User ID/Password, updating your firmware, or backing up your configuration. The following screens are available in Control Panel:
Network Address Device Security Firmware Update Configuration Data
Configuring Network Address
This screen allows you to change your Connection Mode and IP settings. To access the screen, click Control Panel > Network Access.
Field LAN Ethernet MAC Address Connection Mode
Description Displays the units Ethernet MAC address. The access point supports two connection modes for acquiring its own IP configuration settings: ! DHCP ! Static Assigned Select the appropriate connection mode for your network.
Connection Status IP Address
Provides current information about the connection status of the access point. Displays the access points IP Address used to connect to your network. If DHCP is selected, this is the IP Address that your access point is currently using to access the Internet. If using Static Assigned, enter the IP Address here.

Field Subnet Mask

Description Displays the access points Subnet Mask address used to connect to your network. If DHCP is selected, this is the Subnet Mask Address that your access point is currently using to access the Internet. If using Static Assigned, enter the Subnet Mask Address here.

Gateway IP

Displays the access points Gateway IP Address used to connect to your network. If DHCP is selected, this is the Gateway IP Address that your access point is currently using to access the Internet. If using Static Assigned, enter the Gateway IP Address here.
Configuring Device Security
This screen allows you to change your User ID and Password and adjust the inactivity time. To access the screen, click Control Panel > Device Security.

Field Login User ID

Description Changes the User ID used for logging into the access points Configuration Utility. It cannot be longer than 63 bytes. A blank user name is not allowed. The default is admin.

Field Login Password Login Password Confirm
Description Use this option to change the Password used to log into the access points web based utility. It cannot be longer than 63 bytes. A blank password is not allowed. The default is motorola. Sets the amount of idle time (no actions occur) that elapses before the access point automatically logs you off. The default is 10 minutes. Click to save your settings. Click to cancel any changes.

Login Idle Time

Updating Firmware
The Firmware Update screen allows you to update your access points firmware, the mechanism that controls your access points hardware. To check for a firmware update, access this website www.motorola.com/broadband/networking.
To update the firmware: Download the latest firmware file to your computer from the Motorola website. Click Control Panel > Firmware Update to access the Firmware Update screen. To locate the file you downloaded, type the path to the file or click Browse and navigate to it. Click UPDATE to update the access point with the selected firmware file. The access point will inform you that you successfully updated the unit. Follow the prompts to restart.
Saving and Restoring Configuration Settings
The Configuration Data screen allows you to save and restore your access points configuration settings. You are also able to reset the access point to its factory default settings. To access the screen, click Control Panel > Configuration Data.
To reset the access point to its original configuration; click FACTORY DEFAULTS. To backup your settings: 1 Click BACKUP. From the pop up window, choose the destination for the file. Enter a descriptive file name.
To restore your settings: 1 Locate the Configuration file on your computer by entering the path to the file or click Browse and navigate to it. 2 Click RESTORE to reapply the saved settings with the selected file.
This section details possible solutions to common problems that may occur in using the access point.

Contact

If you are unable to locate a solution here, please access our website at www.motorola.com/broadband/networking for the latest information. You can also reach us 7 days a week, 24 hours a day at 1-877-466-8646.

Hardware Solutions

My computer is experiencing difficulty connecting to the wireless network. ! ! ! ! Ensure that your access point is powered on and that the Wireless LED is lit. Ensure that your wireless adapter (PCI card, Notebook or Ethernet adapter) is installed correctly and is active. Ensure that your wireless adapters radio signal is enabled. Review your adapters documentation for further instructions. Ensure that your wireless adapter for your PC and the access point have the same security settings that will allow your computer to access the wireless network. For details on adjusting your security settings, see Wireless Security Settings in Section 3: Configuration. Ensure that your access point is within range of your router or is not behind an obstruction. For example, metal structures will interfere with the signal, as will 2.4 GHz cordless phones, and microwaves. Ensure that your antenna is connected and that your routers antenna is also connected.

SECTION 4

TROUBLESHOOTING
My computer is experiencing difficulty in connecting to the access point. ! Ensure that all of your cable connections are firmly connected. This includes the cables from the wall to your modem, between the router and modem, and, if available, from the access point to your PC. Ensure that your LEDs are not lit Red or not at all. For further information about LED descriptions, see Section 1: Overview. Ensure that you are using Ethernet cables and not telephone cables between the router and modem or router and PC, or if available, access point and PC. Ethernet cables use a wider RJ-45 style plug using 8 wires where telephone style plugs use the smaller RJ-11 style plug using 4 to 6 wires.
The plug on the left is RJ-45; the plug on the right is RJ-11 use only RJ-45.
Ensure that your Ethernet adapter is enabled. To check the status of your adapter, click the monitor icon in the System Tray at the bottom right of your screen. You can also check the status of your Ethernet adaptor by selecting Control Panel > Network and Dial-Up Connections.

Software Solutions

I would like to see if my Internet connection is live.
Use the ping command to test the connection. Before attempting, ensure that Obtain an IP address automatically has been selected in the computers settings and that you have an IP address assigned. Refer to Configure Your Computers in Section 2: Configuration, for further details. Open a command prompt by clicking Start and Run. For Windows 98 and ME, in the Open field, type command and press Enter or OK. For Windows 2000 and XP, type cmd. Or, navigate using your Start button to Programs>Accessories>Command Prompt. 3 In the Command window, type ipconfig. ! You should see an IP address for your network adapter:
Ethernet Adapter Local Area Connection: Connection-specific DNS Suffix.: Example.example.example.com. IP Address. : 192.168.40.10 Subnet Mask. : 255.255.255.0 Default Gateway. : 192.168.40.1
In the Command window, type ping followed by the access points IP address and press Enter. For example type: ping 192.168.40.10. There is a good possibility that the Default Gateways IP address is the access points IP address. You can verify the access points IP address on the Control Panel > Network Access screen. ! If you receive a reply (the first word will be Reply), then your computer is connected to the access point. Proceed to Step 5. If you do NOT receive a reply, repeat steps on a different computer to verify that the first computer is not the cause of the problem.
In the Command window, type ping followed by your ISPs default gateway and press Enter. For example type: ping 216.109.125.72.

Default Gateway A routing device that forwards traffic not destined to a station within the local subnet. DHCP A Dynamic Host Configuration Protocol server dynamically assigns IP addresses to client hosts on an IP network. DHCP eliminates the need to manually assign static IP addresses by leasing an IP address and subnet mask to each client. It enables the automatic reuse of unused IP addresses. DMZ DeMilitarized Zone. This service opens one IP address to the Internet, usually for online gaming, and acts as a buffer between the Internet and your network. 5-2 WA840G
The Domain Name System is the Internet system for converting domain names (like www.motorola.com) to IP addresses. A DNS server contains a table matching domain names such as Internetname.com to IP addresses such as 192.169.9.1. When you access the world-wide web, a DNS server translates the URL displayed on the browser to the destination website IP address. The DNS lookup table is a distributed Internet database; no one DNS server lists all domain name to IP address matches. Domain Name A unique name, such as motorola.com, that maps to an IP address. Domain names are typically much easier to remember than are IP addresses. See DNS. Download To copy a file from one computer to another. You can use the Internet to download files from a server to a computer. Driver Software that enables a computer to interact with a network or other device. For example, there are drivers for printers, monitors, graphics adapters, modems, Ethernet, USB, HPNA, and many others. DSL Digital Subscriber Line DSSS Direct-Sequence Spread Spectrum. DSSS is a transmission technology used in WLAN transmissions where a data signal at the sending station is combined with a higher data rate bit sequence, or chipping code, that divides the user data according to a spreading ratio. The chipping code is a redundant bit pattern for each bit that is transmitted, which increases the signal's resistance to interference. If one or more bits in the pattern are damaged during transmission, the original data can be recovered due to the redundancy of the transmission. Dynamic IP Address An IP address that is temporarily leased to a host by a DHCP server. The opposite of Static IP Address.

TCP Transmission Control Protocol on OSI transport layer four, provides reliable transport over the network for data transmitted using IP (network layer three). It is an end-to-end protocol defining rules and procedures for data exchange between hosts on top of connectionless IP. TCP uses a timer to track outstanding packets, checks error in incoming packets, and retransmits packets if requested. TCP/IP The Transmission Control Protocol/Internet Protocol suite provides standards and rules for data communication between networks on the Internet. It is the worldwide Internetworking standard and the basic communications protocol of the Internet. Tunnel To place packets inside other packets to send over a network. The protocol of the enclosing packet is understood by each endpoint, or tunnel interface, where the packet enters and exits the network. VPNs rely on tunneling to create a secure network. Tunneling requires the following protocol types: ! ! ! A carrier protocol, such as TCP, used by the network that the data travels over An encapsulating protocol, such as IPSec, L2F, L2TP, or PPTP, that is wrapped around the original data A passenger protocol, such as IP, for the original data
UDP User Datagram Protocol. A method used along with the IP to send data in the form of message units (datagram) between network devices over a LAN or WAN. Unicast A point-to-point data transmission sent from one sender to one receiver. This the normal way you access websites. See also multicast.
Universal Serial Bus is a computer interface for add-on devices such as printers, scanners, mice, modems, or keyboards. USB 1.1 supports data transfer rates of 12 Mbps and plug-and-play installation. You can connect up to 127 devices to a single USB port. USB 2.0 supports data rates of 480 Mbps.
VoIP Voice over Internet Protocol is a method to exchange voice, fax, and other information over the Internet. Voice and fax have traditionally been carried over traditional telephone lines of the Public Switched Telephone Network (PSTN) using a dedicated circuit for each line. VoIP enables calls to travel as discrete data packets on shared lines. VoIP is an important part of the convergence of computers, telephones, and television into a single integrated information network. VPN A virtual private network is a private network that uses virtual connections (tunnels) routed over a public network (usually the Internet) to provide a secure and fast connection; usually to users working remotely at home or in small branch offices. A VPN connection provides security and performance similar to a dedicated link (for example, a leased line), but at much lower cost.

WAN A wide-area network provides a connection over a large geographic area, such as a country or the whole world. The bandwidth depends on need and cost, but is usually much lower than for a LAN. WAP Wireless Access Point or Wireless Access Protocol. See also Access Point. WEP Wired Equivalent Privacy encryption protects the privacy of data transmitted over a wireless LAN. WEP uses keys to encrypt and decrypt transmitted data. The access point must authenticate a client before it can transfer data to another client. WEP is part of IEEE 802.11b. Wi-Fi Wireless fidelity (pronounced why'-fy) brand name applied to products supporting IEEE 802.11b/g. WA840G 5-11

WLAN Wireless LAN. WPA

Wi-Fi Protected Access. A security regimen developed by IEEE for protection of data on a WLAN. WWW World Wide Web. An interface to the Internet that you use to navigate and hyperlink to information.
Visit our website at: www.motorola.com/broadband

509107-001 11/03 MGBI

WA840G

WA840GP

Wireless Access Points WA840
Expansive enough for everyone in the home. Motorolas Wireless Access Points redefine networking with effortless 802.11g wireless access.
These Wireless Access Points are the base of a powerful, 802.11g wireless network. Ready to support everyone in your home or small office, theyre designed to deliver speed, reliability, mobility and a little something extra: convenience.
Supports wireless data rates up to 54 Mbps1 thats up
WA840GP PERFORMANCE ENHANCED
Wireless performance can be up to 35% faster than
to 5 times faster than 802.11b networking
Backwards compatible with 802.11b equipment
standard 802.11g networking
Backwards compatible with 802.11g (data rates up
to 54Mbps) and 802.11b (data rates up to 11Mbps) equipment 1

BENEFITS:

Offers 802.11g wireless connectivity Expansive enough to accommodate everyone in your

FEATURES:

One 10/100Base-T Ethernet port to connect either a
cable modem or a DSL modem
Wireless security features include:
home or small office Roam almost anywhere up to 328 feet (100 m) indoors and up to 1312 feet (400 m) outside (distance depends on user environment) Supports a cable or DSL modem so everyone can share a single broadband connection Everyone can also share files, pictures, peripherals, a printer and more Gamers can play competitors on the network or online 24-hour technical support available via the Web or by toll-free phone
> Wi-Fi Protected Access (WPA) with Temporal Key Integrity Protocol (TKIP) or Advanced Encryption Standard (AES) > Legacy 64-bit and 128-bit Wired Equivalency Privacy (WEP) encryption > 802.1X access control Includes an easy-to-use Installation Wizard as well as a Web-based user interface for easy set up

WHATS INCLUDED:

Wireless Access Point Power adapter and cord Ethernet cable Base station stand (WA840GP only) Quick Start Guide CD-ROM containing Installation Wizard and User Guide

Continued on back

Continued from front

SPECIFICATIONS

STANDARDS IEEE 802.3; IEEE 802.3u; IEEE 802.11b Wi-Fi Certified; IEEE 802.11g Wi-Fi Certified; WPA Certified NETWORK PROTOCOLS TCP/IP; UDP; DHCP; HTTP; TFTP PORTS WAN One 10/100 Mbps Ethernet; RJ-45 connector; full/half duplex; Automatic cross-over/straight cable adaptation (Auto-MDIX) WIRELESS DATA RATES 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps1 with auto-fallback support MODULATION CCK, DQPSK, DPBSK, OFDM RANGE Maximum range: outdoor up to 1312 feet indoor up to 328 feet CHANNELS AND FREQUENCY RANGES 111 United States and Canada: 2.4 to 2.4835GHz WIRELESS SECURITY WPA with TKIP or AES encryption; Legacy 64-bit and 128-bit WEP encryption; 802.1X access control POWER 100V AC to 240V AC, 50 60Hz INDICATORS Power LED LAN LED Wireless LED WIRELESS TRANSMIT POWER Maximum Transmit Power: +15 dBm PHYSICAL DIMENSIONS 4.163'' (L) x 4.935'' (W) x 0.984'' (H) WEIGHT 6.6 oz. WARRANTY Two-year limited warranty OPERATING TEMPERATURE 32 F to 104 F (0 C to 40 C) STORAGE TEMPERATURE -22 F to 176 F (-30 C to 80 C) HUMIDITY 5% to 95% (non-condensing) EMISSIONS FCC Part 15 (Subpart B) REGULATORY APPROVALS 802.11b Wi-Fi Certified; 802.11g Wi-Fi Certified; WPA Certified; FCC Class B, CE

SYSTEM REQUIREMENTS

Microsoft Internet Explorer 5.2 or Netscape Navigator 6.2 or higher Broadband Internet access (cable, DSL or other) with an Ethernet (RJ-45) port Each device on the wireless network requires an 802.11g or 802.11b wireless adapter (adapters sold separately) With the WA840GP Performance Enhanced , wireless adapters should be used. CD-ROM drive on your PC For easy installation: > Use the included Installation Wizard or your Web browser for easy set up > Your PC must support one of the following: Microsoft Windows 98SE/Me/2000/XP Home or Professional for use of the Installation Wizard >
Recommended for use with Motorolas Broadband Networking Products. These Wireless Access Points are interoperable with all 802.11g and 802.11b certified equipment.
A word about data rates: Data rate is the speed at which individual bits of data flow through a channel. It is not the same speed at which entire files are uploaded or downloaded. These speeds will vary, and are of ten less than the maximum data rate. Upload and download speeds are affected by several factors including, but not limited to: the capacity of and the services offered by your cable operator or broadband service provider, channel capacity, network traffic, computer equipment, type of server, number of connections to server, and availability of Internet router(s).
To view our full line of Broadband Networking Products, visit our Web site at www.motorola.com/homenetworking

MOTOROLA and the Stylized M logo are registered in the US Patent & Trademark Office. All other product or service names are property of their respective owners. Microsoft Windows, Windows Me, Windows XP and Internet Explorer are registered trademarks of Microsoft Corporation. Netscape, Netscape Navigator, and the Netscape logo are registered trademarks of Netscape in the United States and other countries. Wi-Fi certified is a Certification mark of the Wireless Fidelity Alliance, Inc. Motorola, Inc. 2004.

5620-0804-2K