Wonderful Communication, Mobile Life.
Welcome to HUAWEI E960 HSDPA Wireless Gateway.
HUAWEI E960 HSDPA Wireless Gateway User Guide
Copyright 2007 Huawei Technologies Co., Ltd. All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks

and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this manual are the property of their respective holders.

Notice

The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this manual do not constitute the warranty of any kind, expressed or implied.

Safety Precautions

Read the safety precautions carefully to ensure the correct and safe use of your wireless device. For detailed information, see Chapter 15 "Warnings and Precautions." Do not switch on your device when the device use is prohibited or when the device use may cause interference or danger. Do not use your device while driving. Follow the rules or regulations in hospitals and health care facilities. Switch off your device near medical apparatus. Switch off your device in an aircraft. The device may cause interference to control signals of the aircraft. Switch off your device near high-precision electronic devices. The device may affect the performance of these devices. Do not attempt to disassemble your device or its accessories. Only qualified personnel are allowed to service or repair the device. Do not place your device or its accessories in containers with strong electromagnetic field. Do not place magnetic storage media near your device. Radiation from the device may erase the information stored on them. Do not put your device in a high-temperature place or use it in a place with flammable gas such as a gas station. Keep your device and its accessories away from children. Do not allow children to use your device without guidance. Use approved batteries and chargers only to avoid explosion. Observe the laws or regulations on device use. Respect others privacy and legal rights when using your device.

Table of Contents

1 Getting to Know Your E960.... 1 Appearance.... 1 PC Configuration Requirements... Quick Start..... 3 Gateway Mode..... 3 USB Modem Mode.... 4 Making a Call.... 5 Using the E960 User Guide... Using the E960 Configuration Page.... 6 Logging in to the Management Page... 6 Describing the Management Page... 7 Using the Quick Setup Wizard... 8 Connecting to the Network.... 8 Validating the PIN Code... 9 Viewing the Gateway Configuration Information... Quickly Configuring the Gateway... 11 Configuring PPP Profile Settings.... 11 Selecting the Mode of PPP Connection.. 12 Configuring the WLAN Setting... 12 Configuring the WLAN Encryption Mode.. 13 Validating Quick Setup... Configuring Your Computer... 16 Wireless Configuration... 16 Configuring the PC Network.... Describing Advanced Settings.... Managing the System.... 22 Modifying the Password... 22 Upgrading the Gateway.... 23 Restoring Factory Defaults.... 23
Rebooting the Device.... 24 Viewing the Version Information.... Configuring SIM Card Settings... 25 Enabling or Disabling the PIN Code.... 25 Unlocking the PIN Code... 26 Modifying the PIN Code... Configuring UMTS Settings.... 28 Choose the Preferred Mode and Band... 28 Configuring the Mode for Searching Network... Configuring Dial-up Settings.... 31 Configuring PPP Settings.... 31 Managing the Profile List.... Assigning IP Addresses.... Configuring the WLAN... 36 Enabling or Disabling the WLAN... 36 Configuring WLAN Settings.... 36 Advanced WLAN Settings.... 38 Configuring the MAC Filter... Typical Networking Example.... Troubleshooting.... Warnings and Precautions.... Abbreviations.... 49

Appearance

1. 2. 3. 4. 5. 6. 7. 8. 9.
Getting to Know Your E960
Your E960 supports HSDPA/WCDMA 2100, GSM/GPRS/EDGE 1900/1800/900/850, and network auto-switch. With the E960, you can experience wireless gateway and USB modem at any time and any place.
Phone cable interface Ethernet cable interface Power adapter/USB cable interface Pedestal Network mode indicator Signal strength indicator ON/OFF key WLAN indicator Power indicator

Indicator and Button

The following table introduces the indicator and button of your E960. Indicator Power WLAN When it is in yellow, the charge is finished. If it is steady on and in yellow, the WLAN is enabled. If it is blinking, data is transmitting

Signal strength

Network mode
Indicator Fast blinking in red: SIM card faults (SIM card does not exist or the PIN code is not verified) Steady on and in red: signal strength in level one (weak) Steady on and in yellow: signal strength in level two or three (middle) Steady on and in green: signal strength in level four or five (strong) Double blinking in green: searching the network Blinking in green: registering with the 2G network Steady on and in green: GPRS/EDGE data service connected Fast blinking in green: Downloading the upgrade mode Blinking in blue: registering with the 3G network Steady on and in blue: WCDMA data service connected Steady on and in cyan: HSDPA data service connected Note: When the gateway is initialized, it is steady on and in green for three seconds. Button

ON/ OFF

Press and hold it to power on or off the E960

Interfaces

Power adapter/USB cable interface: When connected with the power adapter, the E960 functions as a wireless gateway. When connected to the PC with a USB data cable, the E960 functions as a USB modem. Ethernet cable interface: Insert an Ethernet cable connected to the PC or other network equipments. Phone cable interface: Insert a phone cable connected with a telephone to realize the voice service.

The following table shows the main operations in the gateway management page. Item Basic Status Quick Setup Connection Advanced Settings Description Displays the parameter configuration status of the gateway. For details, see "Viewing the Gateway Configuration Information." Configures the gateway quickly. For details, see Chapter 4 "Quickly Configuring the Gateway." Displays the network connection status and connects to the network. For details, see "Connecting to the Internet." Configures the advanced settings of the gateway, which includes the following settings: system, SIM card, UMTS, dial-up, DHCP, and WLAN. For details, see Chapter 6 "Describing Advanced Settings." Log out of the gateway page.

Logout

Gateway Status
The following table shows the gateway status information.
Item SIM WAN WCDMA The SIM card is valid.
Description The SIM card is not inserted or invalid. The PPP dial-up connection is failed. The WCDMA network is unavailable.
The PPP dial-up connection is successful. The WCDMA network is connected. & Note
If the gateway is registered with other network modes, the corresponding network connection status is displayed. SIG The signal strength from weak to strong is shown as follows:
Using the Quick Setup Wizard
The quick setup wizard guides you to configure the most important settings of the gateway. If you are using the gateway configuration page for the first time, the system displays the quick setup wizard page by default after you log in. You can configure the basic parameters quickly by following the prompts. For details, refer to Chapter 4 "Quickly Configuring the Gateway."
Connecting to the Internet
Accessing the Connection Status Page
Click Connection to access the page. After you log in to the management page again, you can automatically access the connection status page.
1. 2. 3. 4. If the PIN code protection is enabled, the system prompts you to validate the PIN code. For details, see "Validating the PIN Code." If PPP Connection is Auto or Demand, refresh the page to view the current network connection status. If PPP Connection is Manual, click or to connect or disconnect from the network. Wait for several minutes, if you are prompted that the connection is successful, you can start the IE browser and enter the website address to access the Internet.

Validating the PIN Code

If the PIN code protection is enabled, you are prompted to validate the PIN code when you restart the gateway and log in to the management page. 1. Enter the correct PIN code, and then click.
& Note For the initial PIN code, consult your service provider. If you enter wrong PIN codes for three successive times, the PIN is locked. For details, see "Unlocking the PIN Code." If the PIN validation fails, you cannot use the network-related functions. 2. When you succeed in validating the PIN code, click connection page. to access the network
Viewing the Gateway Configuration Information
On the gateway configuration page, you can view the current parameter configuration information of the gateway and the network connection status. The network connection status includes WAN, LAN, and WLAN. 1. 2. 3. Click Basic Status in the operation navigation area. on the right part of the page to view the status of the gateway. Click Click to view the current status of the gateway on the advanced status page.
Quickly Configuring the Gateway
You can use the quick setup wizard to configure and maintain the basic parameters of the gateway. Click Quick Setup in the operation navigation to access the welcome page. Click to access the PPP profile setting page following the page prompts.
Configuring PPP Profile Settings
Profile Name: Enter the profile name when the text box is null. Dial-up Number/PPP User Name/PPP Password: Enter these three parameters provided by the internet service provider (ISP). The dial-up number is used to initiate the network call; and the PPP user name and password is used to gain the service authorization provided by the ISP. APN/IP Address: Select the mode for obtaining the APN or IP address. If the carrier provides the relevant parameters, select Static and enter the APN and IP address. Otherwise, you need to select Dynamic and the gateway automatically obtains them.
Selecting the PPP Connection Mode
PPP Connection: It is used to select the dial-up access mode. Auto: After the gateway is switched on, it automatically connects to the Internet and will not disconnect regardless of the data transmission. On Demand: The gateway automatically connects to the Internet when there is data transmission. It automatically closes the connection when there is no data transmission. Manual: Manual dial-up. For details, see "Connecting to the Internet."
Configuring the WLAN Setting
SSID: Enter a name for your WLAN.
The service set identifier (SSID) is used to identify a WLAN. A wireless terminal (such as a PC) and the wireless gateway can perform normal data communication only when they have the same SSIDs. To ensure the WLAN security, do not use the default SSID. You can enter a character string as the SSID, such as MyHome.

SSID Broadcast: Enable or disable the SSID broadcast.
Enabled: The E960 broadcasts the SSID of the WLAN, and users can easily access the WLAN. Unauthorized users, however, can also easily access the WLAN because the SSID is broadcasted.
Disabled: The E960 does not broadcast the SSID of the WLAN. Before accessing the WLAN, the user must obtain the SSID of the WLAN. Thus, the WLAN security is improved. & Note: For the convenience of the client accessing the WLAN, you can select Enabled for SSID Broadcast when you configure the WLAN setting. Once you finish setting up the WLAN, you can disable the SSID broadcast to improve the security of the WLAN.
Configuring the WLAN Encryption Mode
To access the wireless network, you must set the wireless security key of your PC be consistent with that of the wireless gateway.

No Encryption

For the convenience of the client accessing the WLAN, you can set the Encryption mode to NO ENCRYPTION when you set up a WLAN. In daily use, however, this option is not recommended for the security of the WLAN.

WPA-PSK/WPA2-PSK

WPA-PSK is a 256-bit data encryption method that can automatically change the key. WPA2-PSK is a more secure version of WPA-PSK, and it supports the IEEE 802.11 standard. WPA Encryption is algorithms for selecting the WPA data encryption. There are three algorithms: TKIP, AES, and TKIP+AES. WPA Pre-Shared Key: You can enter 64-character hexadecimal value or 863-character ASCII value as the key. The ASCII value contains all characters that can be entered through the PC keyboard, and the hexadecimal value contains numbers of 09 and characters of AF. For example, you can enter the ASCII value of 1234abcde as the key.
Network Key Rotation Interval: It is used to set how long a network key is dynamically changed. By default, it is 0. To disable this function, you can set the value to 0 or Null.
Wireless Equivalent Privacy, a 64-bit or 128-bit data encryption method. The 128-bit WEP encryption provides higher security level. Network key 1: You can enter 5 ASCII characters or 10-character hexadecimal numeral to form a 64-bit key. You can also enter 13 ASCII characters or 26-character hexadecimal numeral to form a 128-bit key.

Validating Quick Setup

The last page of the wizard displays the all settings you have configured. To accept settings, click To make changes, click Click to quit the settings. to submit the information. to return.
Configuring Your Computer
In this part, take the Window XP operating system (OS) as an example to describe how to configure your computer. For other OSs, the configuration may be different; thus, you need to configure it according to the actual situation.

Wireless Configuration

The wireless configuration enables your PC connect to the E960 through the wireless network. If you need only the Ethernet to connect your PC, you do not need to configure this.
Configuration Requirements
To set up wireless network connection, your PC must have been configured with the WLAN adapter that supports the IEEE 802.11 b/g protocol. If the encryption function is enabled, you need to ensure that all PCs connecting to the E960 use the same key with the E960. For the use of WLAN adapter, refer to the WLAN adapter user guide provided by the manufacturer. See "Configuring the WLAN Encryption Mode" for the encryption configuration. See "Configuring the WLAN Setting" for SSID parameters configuration.
Configuring the Wireless Network Connection
1. 2. 3. Select Start > Control Panel > Network Connections > Wireless Network Connection. Click Show Wireless Networks to display the wireless network connection list. Select the network connection that the SSID is consistent with that in the E960 WEB configuration, and then click.
If the encryption parameter is set for the E960, the Wireless Network Connection dialog box is displayed and requires the network key and confirmation. The value you entered must be consistent with the WPA Pre-Shared Key or Network Key of the E960.
Wait for several minutes after you enter the correct network key. The wireless connection icon displays in the status area in the lower right corner of the screen. Then, your PC can automatically connect to the E960.
Configuring the PC Network
The recommended configurations of the gateway are as follows: Obtain an IP address automatically. Deselect Use a proxy server for your LAN.
Configuring the Network Connection
1. 2. Select My Network Places > Properties > Local Area Connection. Right-click the Local Area Connection icon and select Properties from the shortcut menu.
In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP) in the This connection uses the following items list box, and then click Properties.

If you need to reconstruct the network or you forget the changes of some parameters, you can choose to restore factory defaults and reconfigure the gateway. Click to open the Restore Defaults window, and then click.
Note: After this operation, all configurations restore to the defaults.

Restarting the Device

1. Click to open the Reboot window.

to restart the gateway.

Viewing the Version Information
Click to display the System Version page. You can view the hardware version, software version, release time, and the hardware version and software version of the wireless module, as shown in the following figure.

& Note:

Configuring SIM Card Settings
You can manage the PIN code on the SIM card settings window, including the following operations: Enabling the PIN code Disabling the PIN code Modifing the PIN code Unlocking the PIN code If you enter the wrong PIN code for three successive times, the PIN code is locked. You need to enter the PUK code to unlock it. The PIN code must be 48 numerals, and letters are not allowed. Click to open the SIM card setting window.
Enabling or Disabling the PIN Code
If the PIN code protection is enabled, you need to validate the PIN code each time when you restart the gateway and log in to the management page; if the PIN code protection is disabled, you do not need to validate the PIN code. 1. 2. 3. 4. Select enable/disable in the PIN Code Operation list box. Enter the correct PIN code. Click. If the PIN code is wrong, the system prompts you to reset it.

Unlocking the PIN Code

If the PIN code is locked, you need to enter correct PUK code and set the new PIN code to unlock it. & Note: If you forgot the PUK code, consult your carrier. If you enter the wrong PUK code for successive 10 times, the SIM card is locked. You need to consult your carrier to unlock the SIM card. Enter the correct PUK code. Enter the new PIN code and confirm it. Click to submit the setting.

1. 2. 3.

Modifying the PIN Code
When the PIN code protection is enabled, you can reset the PIN code. 1. 2. 3. 4. Select modify in the PIN Code Operation list box. Enter the current PIN code. Enter the new PIN code and confirm it. Click to submit the setting.

Configuring UMTS Settings
On the UMTS settings window, you can set the priority of connection modes and bands in searching a network. to open the UMTS Settings window, as shown in the following figure.
Choose the Preferred Mode and Band
1. Click to open the Network Settings window.
Select the preference of connection mode in the Preferred Mode list box. The following table shows the details of connection modes.
Network Mode 3G preferred
Description Performance Maximum rate: 7.2 Mbit/s Maximum rate: 236 Kbit/s Maximum rate: 7.2 Mbit/s Maximum rate: 236 Kbit/s Other The E960 automatically selects the data service mode based on the network signal strength. The high-speed data service mode is preferred. The E960 automatically selects the data service mode based on the network signal strength. The low-speed data service mode is preferred. The E960 works only in high-speed data service mode. The E960 works only in low-speed data service mode.

GPRS preferred

3G only GPRS only & Note:
If the carrier provides only the GPRS service and the Preferred Mode is configured as 3G only, you cannot access the Internet. If the carrier only provides only the HSDPA service and Preferred Mode is configured as GPRS only, you cannot access the Internet. If the carrier provides neither the 3G nor GPRS service, you cannot access the Internet regardless of the Preferred Mode. 3. Select the band to search the network in the Band list box. You can select from the following: All Band GSM900/1800/WCDMA2100 GSM1900 GSM850 to submit settings. 4. Click
Configuring the Mode for Searching Network
1. Click to open the Searching Network window.
2. Select the mode for searching network. Auto: The gateway automatically searches the network and registers with it. Manual: You need to manually search the network and register with it. 3. Click to submit the setting. 4. In Manual mode, select the searched network and click.
Configuring Dial-up Settings
In the Dial Up Settings window, you can configure PPP settings and manage profile settings. to open the Dial Up Settings window, as shown in the following figure.

Configuring PPP Settings

1. Click to open the PPP Settings window, as shown in the following figure.
2. Enter the correct parameters. Profile List: Select a profile from the established dial-up connection list. If the drop-down list is null, you need to create a profile list. PPP Connection: Select the dial-up connection mode. Dial-up Mode Auto On Demand Description After the gateway is switched on, it automatically connects to the Internet and will not disconnect regardless of the data transmission. The gateway automatically connects to the Internet when there is data transmission. It automatically closes the connection when there is no data transmission. Manual dial-up.

Manual

PPP Max Idle Time: The duration of the idle PPP connection. In On Demand mode, if there is no data transmission beyond the duration, the PPP connection automatically closes. PPP MTU: The MTU of the PPP data transmission. It is used to set the maximum number of bytes encapsulated in a single data frame. PPP Max Dial Time: Set the maximum waiting time when connecting to the Internet.
Managing the Profile List
Click to open the Profile settings window and you can create, edit, save, and delete a dial-up connection list.

Interface Description

Parameter Profile List Profile Name Dial-up Number PPP User Name PPP Password APN Description Include all created profile names. Enter the name of the selected or created profile. Enter the character string for PPP dial-up number. It is provided by the network carrier. The user name used in PPP communication. It is provided by the network carrier. The password used in PPP communication. It is provided by the network carrier. Select the mode for obtaining the APN: Dynamic: The network dynamically assigns the APN. Static: Manually enter the APN provided by the network carrier. Select the mode for assigning IP addresses: Dynamic: The network dynamically assigns the IP address. Static: Manually enter the IP address provided by the network carrier.

IP Address

Creating a Profile
1. 2. Enter the profile information in the text box based on prompts. Click to save the new profile.

Modifying a Profile

1. 2. 3. Select a profile to be modified in the Profile List drop-down list. Relevant information is displayed in the corresponding text box. Enter the profile information. Click to save the modified profile.

Deleting a Profile

1. 2. Select a profile to be deleted in the Profile List drop-down list. Click to delete the selected profile.

Assigning IP Addresses

In the dynamic host configuration protocol (DHCP) settings page, you can set the mode for assigning IP addresses in a LAN. DHCP automatically assigns IP addresses to the network devices. If you are using the DHCP server, you need to do the following configurations on the PC connecting with the gateway. For details, refer to "Configuring the PC Network." to open the DHCP setting page.
IP Address: The default IP address of the gateway is 192.168.1.1. Subnet Mask: The combination of the subnet mask and IP address enables the flexible subnetting. By default, the subnet mask is 255.255.255.0. DHCP Server: It is used to assign IP addresses dynamically. If the DHCP server is Enabled, it can automatically assign IP addresses for PCs. It is recommended to select Disabled for the DHCP server. Start IP Address& End IP Address: It is used to define the IP address range that the host can use during the IP address assignment. For example, in the network segment 192.168.1.0/24, the default IP address of the E960 is 192.168.1.1. The host IP address can range from 192.168.1.2 to 192.168.1.254. The minimum range is a single IP address.

DHCP Lease Time: The DHCP server automatically assigns an IP address to each device connected to the network. When the leased time expires, the DHCP server checks whether the device is connected to the network. If the device is disconnected from the network, the server assigns the IP address to another device. Thus, the IP address is not wasted. & Note: The Start IP Address must be smaller than or equal to the End IP Address. If the DHCP Server is Enabled, the configurations of Start IP Address, End IP address, and DHCP Lease Time are valid; otherwise, you cannot configure them.

1. Click figure.

Configuring the WLAN
Enabling or Disabling the WLAN
to open the WLAN Module Settings window, as shown in the following
2. Enable or disable the WLAN module. Enable: Enable the WLAN module. You can use the WLAN function and configure relevant parameters. Disable: Disable the WLAN module. You cannot use the WLAN function and configure relevant parameters. to submit the setting. 3. Click
Configuring WLAN Settings
Click to open the WLAN Settings window, as shown in the following figure.

Selecting Interface IDs

Wireless Interface: It refers to the SSID and MAC address, and is used to identify the wireless gateway.
SSID: The service set identifier (SSID) is used to identify a WLAN. A wireless terminal (such as a PC) and the wireless gateway can perform normal data communication only when they have the same SSIDs. To ensure the WLAN security, do not use the default SSID. You can enter a character string as the SSID, such as MyHome.
Enabling or Disabling the SSID Broadcast
Enabled: Enable the SSID broadcast. The E960 broadcasts the SSID of the WLAN, and users can easily access the WLAN. Unauthorized users, however, can also easily access the WLAN. Disabled: Disable the SSID broadcast. The E960 does not broadcast the SSID of the WLAN. Before accessing the WLAN, the user must obtain the SSID of the WLAN. Thus, the WLAN security is improved.
Enabling or Disabling the AP Isolation
On: The terminals (PCs) connecting to the gateway through the WLAN cannot access each other. Off: The terminals (PCs) connecting to the gateway through the WLAN can access each other.

When the signal strength is normal, what to do if the downloading rate is much lower
In this case, you may need to set the value in registry as following procedure. 1. 2. Click Start and then select Run. Type regedit in the Open text box and then click OK.
Select Parameters under the following directory: \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip.
Select Edit > New > DWORD Value.
Rename New Value #1 to TcpWindowSize.
Right-click TcpWindowSize and then select Modify in the shortcut menu.
Select Decimal and enter 65535 in the Value data text box, and then click OK.
For the DWORD value of DefaultRcvWindow, do the same operations as that of TcpWindowSize.
Electronic Device Hospital

Warnings and Precautions

Turn off your device near high-precision electronic devices. The wireless device may affect the performance of these devices. Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic-control devices can be affected. If you are using an electronic medical device, consult the device manufacturer to confirm whether the radio wave affects the operation of this device.
Pay attention to the following points in hospitals or health care facilities: Do not take your wireless device into the operating room (OR), intensive care unit (ICU), or coronary care unit (CCU). Do not use your wireless device at places for medical treatment where wireless device use is prohibited.

Traffic Safety

Please observe local laws and regulations on wireless device use. Do not use your wireless device while driving to avoid traffic accident. Secure the wireless device on its holder. Do not place the wireless device on the seat or other places where it can get loose in a sudden stop or collision. Use the wireless device after the vehicle stops at a safe place. Do not place the wireless device over the air bag or in the air bag outspread area. Otherwise, the wireless device may hurt you owing to the strong force when the air bag inflates. Observe the rules and regulations of airline companies. When boarding or approaching a plane, turn off the wireless device. In areas where wireless device use is prohibited, turn off the wireless device. Otherwise, the radio signal of the wireless device may disturb the plane control signals. Turn off your wireless device before boarding an aircraft.

Storage Environment

Do not place magnetic storage media such as magnetic cards and floppy disks near the wireless device. Radiation from the wireless device may erase the information stored on them.
Do not put your wireless device, and other accessories in containers with strong magnetic field, such as an induction cooker and a microwave oven. Otherwise, circuit failure, fire, or explosion may occur. Do not leave your wireless device, and other accessories in a very hot or cold place. Otherwise, malfunction of the products, fire, or explosion may occur. Do not place sharp metal objects such as pins near the earpiece. The earpiece may attract these objects and hurt you when you are using the wireless device. Do not subject your wireless device, and other accessories to serious collision or shock. Otherwise, wireless device malfunction, overheat, fire, or explosion may occur. Do not put your wireless device in the back pocket of your trousers or skirt to avoid wireless device damage while seated.

Children Safety

Put your wireless device, and other accessories in places beyond the reach of children. Do not allow children to use the wireless device, or other accessories without guidance. Do not allow children to touch the small fittings. Otherwise, suffocation or gullet jam can be caused if children swallow the small fittings.

Operating Environment

The wireless device, and other accessories are not water-resistant. Keep them dry. Protect the wireless device, or other accessories from water or vapor. Do not touch the wireless device with a wet hand. Otherwise, short-circuit and malfunction of the product or electric shock may occur. Do not use the wireless device in dusty, damp and dirty places or places with magnetic field. Otherwise, malfunction of the circuit may occur. Do not turn on or off the wireless device when it is near your ears to avoid negative impact on your health. On a thunder stormy day, do not use your wireless device outdoors or when it is being charged. The wireless device may interfere with nearby TV sets, radios and PCs. In accordance with international standards for radio frequency and radiation, use wireless device accessories approved by the manufacturer only.

Wonderful Communication, Mobile Life.
Welcome to HUAWEI E960 HSDPA Wireless Gateway.
HUAWEI E960 HSDPA Wireless Gateway User Guide
Copyright 2007 Huawei Technologies Co., Ltd.

All Rights Reserved

No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks

and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this manual are the property of their respective holders.

Notice

The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this manual do not constitute the warranty of any kind, expressed or implied.

Safety Precautions

Read the safety precautions carefully to ensure the correct and safe use of your wireless device. For detailed information, see Chapter 15 "Warnings and Precautions." Do not switch on your device when the device use is prohibited or when the device use may cause interference or danger. Do not use your device while driving. Follow the rules or regulations in hospitals and health care facilities. Switch off your device near medical apparatus. Switch off your device in an aircraft. The device may cause interference to control signals of the aircraft. Switch off your device near high-precision electronic devices. The device may affect the performance of these devices. Do not attempt to disassemble your device or its accessories. Only qualified personnel are allowed to service or repair the device. Do not place your device or its accessories in containers with strong electromagnetic field. Do not place magnetic storage media near your device. Radiation from the device may erase the information stored on them. Do not put your device in a high-temperature place or use it in a place with flammable gas such as a gas station. Keep your device and its accessories away from children. Do not allow children to use your device without guidance. Use approved batteries and chargers only to avoid explosion. Observe the laws or regulations on device use. Respect others privacy and legal rights when using your device.

Table of Contents

1 Getting to Know Your E960...1 Appearance....1 PC Configuration Requirements...Quick Start.....3 Gateway Mode....3 USB Modem Mode....4 Making a Call....5 Using the E960 User Guide...Using the E960 Configuration Page...6 Logging in to the Management Page....6 Describing the Management Page...7 Using the Quick Setup Wizard...8 Connecting to the Network....8 Validating the PIN Code...9 Viewing the Gateway Configuration Information..Quickly Configuring the Gateway...10 Configuring PPP Profile Settings...10 Selecting the Mode of PPP Connection...11 Configuring the WLAN Setting....11 Configuring the WLAN Encryption Mode...12 Validating Quick Setup...Configuring Your Computer....15 Wireless Configuration...15 Configuring the PC Network....Describing Advanced Settings....Managing the System....21 Modifying the Password....21 Upgrading the Gateway....22 Restoring Factory Defaults...22
Rebooting the Device...23 Viewing the Version Information...Configuring SIM Card Settings...24 Enabling or Disabling the PIN Code...24 Unlocking the PIN Code...25 Modifying the PIN Code...Configuring UMTS Settings....27 Choose the Preferred Mode and Band...27 Configuring the Mode for Searching Network...Configuring Dial-up Settings....30 Configuring PPP Settings....30 Managing the Profile List....Assigning IP Addresses....Configuring the WLAN....35 Enabling or Disabling the WLAN...35 Configuring WLAN Settings....35 Advanced WLAN Settings...37 Configuring the MAC Filter...Typical Networking Example...Troubleshooting.....Warnings and Precautions....Abbreviations....49

Appearance

1. 2. 3. 4. 5. 6. 7. 8. 9. Phone Cable Ethernet Cable Charger/USB Cable Pedestal Network mode indicator Signal strength indicator ON/OFF key WLAN indicator Power Indicator
Getting to Know Your E960
Your E960 supports HSDPA/WCDMA 2100, GSM/GPRS/EDGE 1900/1800/900/850, and network auto-switch. With the E960, you can experience wireless gateway and USB modem at any time and any place.

Indicator and Button

The following table introduces the indicator and button of your E960. Indicator Power WLAN Signal strength When it is in yellow, the charge is finished. If it is steady on and in yellow, the WLAN is enabled. If it is blinking, data is transmitting Fast blinking in red: No SIM card or unverified PIN code Steady on in red: Signal strength in level one (weak) Steady on in yellow: Signal strength in level two or three (middle)
Steady on in green: Signal strength in level four or five (strong) Network mode Double blinking in green: Searching the network Blinking in green: Normal 2G network Steady on and in green: GPRS/EDGE data service connected Fast blinking in green: Downloading the upgrade mode Blinking in blue: Normal WCDMA network Steady on in blue: WCDMA data service connected Steady on in cyan: HSDPA data service connected Note: When the gateway is initialized, it is steady on in green for three seconds. Button ON/ OFF Press and hold it to power on or off the E960

Interfaces

Power adapter/USB cable: When connected with the power adapter, the E960 functions as a wireless gateway. When connected to the PC with a USB data cable, the E960 functions as a USB modem. Ethernet cable: Insert an Ethernet cable connected to the PC or other network equipments. Phone cable: Insert a phone cable connected with a telephone to realize the voice service.
PC Configuration Requirements
The recommended PC configurations for using the E960 are as follows: CPU: Pentium 500 MHz or above Memory: 128 MB RAM or above Hard disk: 100 MB available space Operating System: Windows 2000, Windows XP, or Windows Vista. LCD resolution: 800*600 pixel or above, recommended 1024*768 pixel. Interface: standard USB interface Internet Browser: Internet Explorer 6.0 or above, Firefox 1.5 or above, Netscape 8.0 or above

Note: If the program is not started, you can access the optical drive path of the E960, double-click the disk icon or right-click it, and then select Open. Double-click the AutoRun.exe file, the installation program starts. Do not plug or unplug the E960 in the installation process. Enter the Mobile Partner, and you can perform the applications such as wireless accessing the Internet, SMS, email, and phone book.

Making a Call

When the gateway is switched on, you can make a voice call with the telephone connected with E960. Pick up the handset and dial the number.
Using the E960 User Guide
The electrical version of the E960 user guide is compressed in the installation program of the Mobile Partner. In USB modem mode, you can copy the user guide to your PC as the following method. 1. 2. 3. Access My Computer. Right-click the drive icon of the Mobile Partner, and then select Open to access the drive document. View and copy the Huawei E960 HSDPA Wireless Gateway User Guide and Mobile Partner User Guide.
Using the E960 Configuration
Logging in to the Management Page
Start the IE browser, and then enter the address http://192.168.1.1 in the address bar. Select User Type, enter Password, and then click.
Admin: Has the rights to view and modify the configurations. The default password is admin; User: Has the right to view only the basic information. The default password is user. Note: To avoid the configuration conflict, only one user can log in to the E960 management page at a time.
Describing the Management Page
Operation Navigation Area: Shows the main functions of the management console. User Operation Area: Shows configuration information, data information, help information, and function operation area of the gateway. The user operation window varies with different function operations. Status Display Area: Shows the network mode, PPP dial-up status, network signal strength, and SIM card status in real-time.

Operation Functions

The following table shows the main operations in the gateway management page. Item Basic Status Quick Setup Connection Advanced Settings Description Displays the parameter configuration status of the gateway. For details, see "Viewing the Gateway Configuration Information." Configures the gateway quickly. For details, see Chapter 4 "Quickly Configuring the Gateway." Displays the network connection status and connects to the network. For details, see "Connecting to the Internet." Configures the advanced settings of the gateway, which includes the following settings: system, SIM card, UMTS, dial-up, DHCP, and WLAN. For details, see Chapter 6 "Describing Advanced Settings." Log out of the gateway page.

Viewing the Gateway Configuration Information
On the gateway configuration page, you can view the current parameter configuration information of the gateway and the network connection status. The network connection status includes WAN, LAN, and WLAN. 1. 2. 3. Click Basic Status in the operation navigation area. on the right part of the page to view the status of the gateway. Click Click to view the current status of the gateway on the advanced status page.
Quickly Configuring the Gateway
You can use the quick setup wizard to configure and maintain the basic parameters of the gateway. Click Quick Setup in the operation navigation to access the welcome page. Click to access the PPP profile setting page following the page prompts.
Configuring PPP Profile Settings
Profile Name: Enter the profile name when the text box is null. Dial-up Number/PPP User Name/PPP Password: Enter these three parameters provided by the internet service provider (ISP). The dial-up number is used to initiate the network call; and the PPP user name and password is used to gain the service authorization provided by the ISP. APN/IP Address: Select the mode for obtaining the APN or IP address. If the carrier provides the relevant parameters, select Static and enter the APN and IP address. Otherwise, you need to select Dynamic and the gateway automatically obtains them.
Selecting the PPP Connection Mode
PPP Connection: It is used to select the dial-up access mode. Auto: After the gateway is switched on, it automatically connects to the Internet and will not disconnect regardless of the data transmission. On Demand: The gateway automatically connects to the Internet when there is data transmission. It automatically closes the connection when there is no data transmission. Manual: Manual dial-up. For details, see "Connecting to the Internet."
Configuring the WLAN Setting
SSID: Enter a name for your WLAN.
The service set identifier (SSID) is used to identify a WLAN. A wireless terminal (such as a PC) and the wireless gateway can perform normal data communication only when they have the same SSIDs. To ensure the WLAN security, do not use the default SSID. You can enter a character string as the SSID, such as MyHome.
SSID Broadcast: Enable or disable the SSID broadcast.
Enabled: The E960 broadcasts the SSID of the WLAN, and users can easily access the WLAN. Unauthorized users, however, can also easily access the WLAN because the SSID is broadcasted.
Disabled: The E960 does not broadcast the SSID of the WLAN. Before accessing the WLAN, the user must obtain the SSID of the WLAN. Thus, the WLAN security is improved. Note: For the convenience of the client accessing the WLAN, you can select Enabled for SSID Broadcast when you configure the WLAN setting. Once you finish setting up the WLAN, you can disable the SSID broadcast to improve the security of the WLAN.

Configuring the Wireless Network Connection
1. 2. 3. Select Start > Control Panel > Network Connections > Wireless Network Connection. Click Show Wireless Networks to display the wireless network connection list. Select the network connection that the SSID is consistent with that in the E960 WEB configuration, and then click.
If the encryption parameter is set for the E960, the Wireless Network Connection dialog box is displayed and requires the network key and confirmation. The value you entered must be consistent with the WPA Pre-Shared Key or Network Key of the E960.
Wait for several minutes after you enter the correct network key. The wireless connection icon displays in the status area in the lower right corner of the screen. Then, your PC can automatically connect to the E960.
Configuring the PC Network
The recommended configurations of the gateway are as follows: Obtain an IP address automatically. Deselect Use a proxy server for your LAN.
Configuring the Network Connection
1. 2. Select My Network Places > Properties > Local Area Connection. Right-click the Local Area Connection icon and select Properties from the shortcut menu.
In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP) in the This connection uses the following items list box, and then click Properties.
Select Obtain an IP address automatically and Obtain DNS server address automatically in the Internet Protocol (TCP/IP) Properties dialog box, and then click OK.

Disabling Proxy Settings

1. 2. 3. Start the IE browser, and then select Tools > Internet Options. Select the Connections tab, and then click LAN Settings. In the LAN Settings dialog box, deselect Use a proxy server for your LAN.
Describing Advanced Settings
In the Advanced Settings page, you can configure the basic attributes and advanced parameters of the gateway, and perform routine maintenance and management to the gateway. In the operation navigation area, click Advanced Settings to access the page, as shown in the following figure.

Configuring SIM Card Settings
You can manage the PIN code on the SIM card settings window, including the following operations: Enabling the PIN code Disabling the PIN code Modifing the PIN code Unlocking the PIN code
If you enter the wrong PIN code for three successive times, the PIN code is locked. You need to enter the PUK code to unlock it. The PIN code must be 48 numerals, and letters are not allowed. Click to open the SIM card setting window.
Enabling or Disabling the PIN Code
If the PIN code protection is enabled, you need to validate the PIN code each time when you restart the gateway and log in to the management page; if the PIN code protection is disabled, you do not need to validate the PIN code. 1. 2. 3. 4. Select enable/disable in the PIN Code Operation list box. Enter the correct PIN code. Click If the PIN code is wrong, the system prompts you to reset it.

Unlocking the PIN Code

If the PIN code is locked, you need to enter correct PUK code and set the new PIN code to unlock it. Note: If you forgot the PUK code, consult your carrier. If you enter the wrong PUK code for successive 10 times, the SIM card is locked. You need to consult your carrier to unlock the SIM card. Enter the correct PUK code. Enter the new PIN code and confirm it. to submit the setting. Click

1. 2. 3.

Modifying the PIN Code
When the PIN code protection is enabled, you can reset the PIN code. 1. 2. 3. 4. Select modify in the PIN Code Operation list box. Enter the current PIN code. Enter the new PIN code and confirm it. Click to submit the setting.
Configuring UMTS Settings
On the UMTS settings window, you can set the priority of connection modes and bands in searching a network. to open the UMTS Settings window, as shown in the following figure.
Choose the Preferred Mode and Band
1. Click to open the Network Settings window.
Select the preference of connection mode in the Preferred Mode list box. The following table shows the details of connection modes.
Network Mode 3G preferred

Description Performance Maximum rate: 7.2 Mbit/s Maximum rate: 236 Kbit/s Maximum rate: 7.2 Mbit/s Maximum rate: 236 Kbit/s Other The E960 automatically selects the data service mode based on the network signal strength. The high-speed data service mode is preferred. The E960 automatically selects the data service mode based on the network signal strength. The low-speed data service mode is preferred. The E960 works only in high-speed data service mode. The E960 works only in low-speed data service mode.

GPRS preferred

3G only GPRS only
Note: If the carrier provides only the GPRS service and the Preferred Mode is configured as 3G only, you cannot access the Internet. If the carrier only provides only the HSDPA service and Preferred Mode is configured as GPRS only, you cannot access the Internet. If the carrier provides neither the 3G nor GPRS service, you cannot access the Internet regardless of the Preferred Mode. 3. Select the band to search the network in the Band list box. You can select from the following: All Band GSM900/1800/WCDMA2100 GSM1900 GSM850 to submit settings. 4. Click
Configuring the Mode for Searching Network
1. Click to open the Searching Network window.
Select the mode for searching network. Auto: The gateway automatically searches the network and registers with it. Manual: You need to manually search the network and register with it. 3. Click to submit the setting. 4. In Manual mode, select the searched network and click.
Configuring Dial-up Settings
In the Dial Up Settings window, you can configure PPP settings and manage profile settings. to open the Dial Up Settings window, as shown in the following figure.

Configuring PPP Settings

1. Click to open the PPP Settings window, as shown in the following figure.
Enter the correct parameters. Profile List: Select a profile from the established dial-up connection list. If the drop-down list is null, you need to create a profile list. PPP Connection: Select the dial-up connection mode. Dial-up Mode Description After the gateway is switched on, it automatically connects to the Internet and will not disconnect regardless of the data transmission. The gateway automatically connects to the Internet when there is data transmission. It automatically closes the connection when there is no data transmission. Manual dial-up.

Auto On Demand

Manual
PPP Max Idle Time: The duration of the idle PPP connection. In On Demand mode, if there is no data transmission beyond the duration, the PPP connection automatically closes. PPP MTU: The MTU of the PPP data transmission. It is used to set the maximum number of bytes encapsulated in a single data frame. PPP Max Dial Time: Set the maximum waiting time when connecting to the Internet.
Managing the Profile List
Click to open the Profile settings window and you can create, edit, save, and delete a dial-up connection list.

Interface Description

Parameter Profile List Profile Name Dial-up Number PPP User Name PPP Password APN Description Include all created profile names. Enter the name of the selected or created profile. Enter the character string for PPP dial-up number. It is provided by the network carrier. The user name used in PPP communication. It is provided by the network carrier. The password used in PPP communication. It is provided by the network carrier. Select the mode for obtaining the APN: Dynamic: The network dynamically assigns the APN. Static: Manually enter the APN provided by the network carrier. Select the mode for assigning IP addresses: Dynamic: The network dynamically assigns the IP address. Static: Manually enter the IP address provided by the network carrier.

IP Address

Creating a Profile
1. 2. Enter the profile information in the text box based on prompts. Click to save the new profile.

Modifying a Profile

1. 2. 3. Select a profile to be modified in the Profile List drop-down list. Relevant information is displayed in the corresponding text box. Enter the profile information. Click to save the modified profile.

Deleting a Profile

1. 2. Select a profile to be deleted in the Profile List drop-down list. Click to delete the selected profile.

Assigning IP Addresses

In the dynamic host configuration protocol (DHCP) settings page, you can set the mode for assigning IP addresses in a LAN. DHCP automatically assigns IP addresses to the network devices. If you are using the DHCP server, you need to do the following configurations on the PC connecting with the gateway. For details, refer to "Configuring the PC Network."
to open the DHCP setting page.
IP Address: The default IP address of the gateway is 192.168.1.1. Subnet Mask: The combination of the subnet mask and IP address enables the flexible subnetting. By default, the subnet mask is 255.255.255.0. DHCP Server: It is used to assign IP addresses dynamically. If the DHCP server is Enabled, it can automatically assign IP addresses for PCs. It is recommended to select Disabled for the DHCP server. Start IP Address& End IP Address: It is used to define the IP address range that the host can use during the IP address assignment. For example, in the network segment 192.168.1.0/24, the default IP address of the E960 is 192.168.1.1. The host IP address can range from 192.168.1.2 to 192.168.1.254. The minimum range is a single IP address.

Bridge Restriction: It refers to the limitation to the peer MAC addresses. When it is Disabled, the E960 can access all the remote bridges; when it is Enabled, the E960 can only access the remote bridges that the addresses are in the address list. Bridges: It refers to the physical address of the remote peer bridge. The gateway supports the point-to-multipoint (PTM) bridge mode, and a wireless gateway can connect four remote peer bridges at the same time.
Peer MAC Address: It refers to the physical address list of the remote peer bridges. It contains a maximum of four physical addresses. Link Status: Up shows the successful connection and Down shows the failed connection.
Configuring the MAC Filter
Click to open the Wlan MAC Filter Settings window. You can control and manage the clients accessing the WLAN, and improve the WLAN security performance.

MAC Restrict Mode

The following table lists the MAC address filter modes: Value Disabled Allow Deny Description The MAC address filter function is disabled. The clients with addresses in the MAC Address list are allowed to connect with the gateway through the WLAN. The clients with addresses in the MAC Address list are not allowed to connect with the gateway through the WLAN.

MAC Addresses

Enter MAC addresses in the list. The gateway can perform access control over the clients that MAC addresses are in the list. The list can contain a maximum of 16 MAC addresses.
Typical Networking Example
You can construct a small LAN through the WLAN interface or four Ethernet interfaces of the gateway. Your gateway also supports external hubs, Ethernet switches, or routers. To construct a LAN with multiple PCs, you can extend the Ethernet interfaces through a hub or Ethernet switch. For example, the gateway constructs a small-sized LAN with multiple PCs in the SOHO to access the Internet wirelessly, and the networking diagram is as follows:

UPLINK(HSDPA )

218.10.1.1 WLAN E960 192.168.1.1/24
Routing/NAT WLAN Ethernet Laptop1 Printer Laptop2
PC1 DHCP IP:192.168.1.105
LAN Sw itch/ Router DHCP IP:192.168.1.107 IP:192.168.1.108 DHCP IP:192.168.1.109

1. 2. 3. 4.

Troubleshooting
The PC in a LAN cannot access internet.
The power indicator is on, and the E960 is normally connected with the power adapter. If the power indicator is off, you need to check whether the power is normally connected. There are five signal strength indicators on the E960 panel. The more green indicators are on, the stronger the signal strength. If all of the signal strength indicators are off, you need to check whether the area is covered by WLAN. If the area is covered by WLAN, you need to check whether the network mode is right. See Chapter 9 "Configuring UMTS Settings" for information about network mode. If the 1, 2, 3, 4 four indicators on the panel blinks, the corresponding Ethernet interfaces are normally connected. If the indicators are off, you need to check and ensure that the corresponding Ethernet connection is normal. You must configure the correct PPP user name and PPP password when you access the internet through the E960. Check whether they are correct, and see "Configuring PPP Profile Settings" for details. If the DHCP service is disabled and the PC obtains the IP address dynamically, the PC also cannot access the internet. You can change the mode to manually assign an IP address. See "Configuring the PC Network." Check whether the driver of the network adapter is correctly installed. If the preceding methods cannot solve the problem, you can reset the E960 to factory defaults.

The PC in a WLAN cannot access the WLAN.
1. 2. 3. 4. If there are interferences or shields near the E960, you can adjust the position of the E960. When the signal strength is strong, you can move to the next step. Check and record the following data on the PC's network adapter: SSID, WEP type, and key. Check and record the following data on the E960: SSID, WEP type, and key. Compare the data, the SSID on the network adapter should be ANY or be the same with that on the E960. The WEP type and key on the network adapter and E960 should be identical. Otherwise, you need to change the data on the network adapter.
What if I forgot the IP address of the LAN interface
If you forgot the IP address of the LAN interface, you can input http://e.home and login in the mode of PC obtaining IP address automatically.
What to do if bridging between two EC506s is unsuccessful
1. 2. Make sure that the two gateways work on the same channel. For details, see "Selecting the WLAN Channel." Make sure that the MAC address of one gateway is in the peer MAC address list of another gateway. For details, see "Configuring Access Attributes of the Client."
When the signal strength is normal, what to do if the downloading rate is much lower
In this case, you may need to set the value in registry as following procedure. 1. 2. Click Start and then select Run. Type regedit in the Open text box and then click OK.
Select Parameters under the following directory: \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip.
Select Edit > New > DWORD Value.
Rename New Value #1 to TcpWindowSize.
Right-click TcpWindowSize and then select Modify in the shortcut menu.
Select Decimal and enter 65535 in the Value data text box, and then click OK.
For the DWORD value of DefaultRcvWindow, do the same operations as that of TcpWindowSize.
Electronic Device Hospital

Warnings and Precautions

Turn off your device near high-precision electronic devices. The wireless device may affect the performance of these devices. Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic-control devices can be affected. If you are using an electronic medical device, consult the device manufacturer to confirm whether the radio wave affects the operation of this device.
Pay attention to the following points in hospitals or health care facilities: Do not take your wireless device into the operating room (OR), intensive care unit (ICU), or coronary care unit (CCU). Do not use your wireless device at places for medical treatment where wireless device use is prohibited. When using your wireless device near someone who is suffering from a heart disease, turn down the ring tone volume or vibration properly so that it does not affect the person.

Operating Environment

The wireless device, battery, and charger are not water-resistant. Keep them dry. Protect the wireless device, battery and charge from water or vapor. Do not touch the wireless device with a wet hand. Otherwise, short-circuit and malfunction of the product or electric shock may occur. Do not use the wireless device in dusty, damp and dirty places or places with magnetic field. Otherwise, malfunction of the circuit may occur. Do not turn on or off the wireless device when it is near your ears to avoid negative impact on your health. When carrying or using the wireless device, keep the antenna at least one inch (2.5 centimeters) away from your body, to avoid negative impact on your health caused by radio frequency leakage. If you feel uncomfortable (such as falling sick or qualm) after playing games on your wireless device for a long time, please go to see a doctor immediately. On a thunder stormy day, do not use your wireless device outdoors or when it is being charged. Do not touch the antenna when a call is going on. Touching the antenna may affect call quality and cause the wireless device to operate with more power. As a result, the talk time and standby time are shortened.
The wireless device may interfere with nearby TV sets, radios and PCs. In accordance with international standards for radio frequency and radiation, use wireless device accessories approved by the manufacturer only.

Cleaning and Maintenance

Before you clean or maintain the wireless device, turn off it and disconnect it from the charger. Otherwise, electric shock or short-circuit of the battery or charger may occur. Do not use any chemical detergent, powder, or other chemical agent (such as alcohol and benzene) to clean the phone and the charge. Otherwise, part damage or a fire can be caused. You can clean the phone and the charger with a piece of soft antistatic cloth that is a little wet. Do not scratch the shell of the wireless device. Otherwise, the shed coating may cause skin allergy. Once it happens, stop using the phone at once and go to see a doctor. If the wireless device or any of its fittings does not work, turn to the local authorize service center for help.
3G A AC ARP AP APN C CDMA D DHCP DNS DL E EDGE G GSM GPRS GGSN H HSPA HSDPA HSUPA HLR High Speed Packet Access High Speed Downlink Packet Access High Speed Uplink Packet Access Home Location Register Global System for Mobile communications General Packet Radio Service Gateway GPRS Support Node Enhanced Data rates for GSM Evolution Dynamic Host Configuration Protocol Domain Name Server down link, downlink Code Division Multiple Access Alternating Current Address Resolution Protocol Access Point Access Point Name The Third Generation

Abbreviations

I IP ICMP L LAN LED L2TP M MSC N NAT P PCS PSTN POTS PPTP R RTT S SOHO SCP SGSN SDRAM T TKIP U UMTS UL V VLR Visitor Location Register Universal Mobile Telecommunications System up link, uplink Temporal Key Integrity Protocol Small Office Home Office Service Control Point Serving GPRS Support Node Synchronous Dynamic Random Access Memory Radio Transmission Technology Personal communication systems Public Switched Telephone Network Plain Old Telephone Service Point to Point Tunneling Protocol Network Address Translation Mobile Switching Center Local Area Network Light Emitting Diode Layer 2 Tunneling Protocol Internet Protocol Internet Control Message Protocol
VPN W WAN WLAN WCDMA WI-FI

Virtual Private Network

Wide Area Network Wireless Local Area Network Wideband CDMA Wireless Fidelity