JBL, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA 1.516.255.4525 www.jbl.com 2006 Harman International Industries, Incorporated. All rights reserved. JBL, Harman International, JBL On Tour and Creature are registered trademarks, and JBL On Time, JBL Radial, JBL Spot, JBL Spyro and Duet are trademarks, of Harman International Industries, Incorporated. * The trademark On Stage is used with permission of OSA International, Inc. Specifications are subject to change without notice. iPod not included. iPod is a registered trademark of Apple Computer, Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JBL is under a license agreement. Part No. JBLHDPHONES8/06 Printed 8/06 Designed, edited and digitally produced by Harman Consumer Group Marketing & Design Center, Woodbury, NY.

headphones

Legendary JBL sound. For your ears only.
>> Go one on one with your favorite artists
>> JBL has been helping musicians sound their best for audiences large and small for more than 60 years. Now were helping musicians sound their best for you, and you alone. JBL delivers all the sonic realism and deep, distortion-free bass you expect from the worlds leading professional audio brand through compact, lightweight headphones that can go with you anywhere.
with a major assist from JBL. JBL headphones get you up close and personal. Does fourth-row center sound about right?
>> Choose high-performance earphones so comfortable, you may forget youre wearing them. Or noisecanceling headphones that let you tune out the rest of the passengers, or the rest of the world. Or. Bluetooth-enabled headphones that connect wirelessly to your iPod JBL headphones are all about you and your music, and how and where you like to enjoy it. Dont worry about everyone else they can get their own set.
>> JBL Reference 200 Series Lightweight Earphones >> JBL Reference 400 Series On- and Over-Ear Headphones >> JBL Reference 500 Series Noise-Canceling Headphones >> JBL Reference 600 Series Bluetooth Wireless Headphone >> Technical Specifications >> JBL Multimedia Products

1213 1415

JBL Reference 200 Series
>> Earphones have always been a smaller, more portable alternative to traditional headphones, and JBL Reference 200 earphones are certainly that. But Reference 200 earphones are designed to perform more like their larger counterparts. Is it possible to get realistic, full-spectrum sound from virtually weightless earphones that can easily slip into a pocket? Would we have brought it up if the answer were no?
Okay, so maybe the world doesnt revolve around you. But at least you get to pick all the music.
>> There are earphones.
And then there are JBL earphones.
JBL Reference 210 >> Lightweight in-ear design >> In-line volume control >> True JBL performance >> Comfortable foam ear pads >> Tangle-free wire management system >> Compact carrying case
JBL Reference 220 >> Lightweight in-ear design >> High-quality miniature transducers outperform other earphone systems >> Wear them your way: foam ear pads, silicone in-ear inserts, detachable ear cuffs or a foldable under-chin strap >> Flexible cloth-covered wires >> Three ear-piece sizes included, for a personal fit

Will you use them to help you concentrate? Or simply get away from it all?

JBL Reference 400 Series

>> Your daily routine may take you to all kinds of places where you dont want to be. But JBL Reference 400 headphones are your ticket out. With large, accurate transducers in compact on- and over-ear designs, 400 Series headphones deliver rich, powerful sound with plenty of the bass punch for which JBL is famous. If compact-but-powerful sounds like a winning combination, brace yourself for another one: lightweight-but-rugged. JBL 400 Series headphones are designed for hours of comfortable use.
>> Go where you have to go.
But be somewhere else entirely. JBL Reference 410 >> Compact on-ear design >> 40mm Transducers deliver JBL realism and great bass response >> Adjustable padded headband >> Folds for easy storage and transport JBL Reference 420 >> Midsize over-ear design >> Advanced transducers deliver unsurpassed fidelity >> Crystal-clear high- and mid-frequency response, distortion-free bass >> Genuine leather headband and ear cups >> Innovative headband designed for hours of comfort >> Single cloth-covered side cable eliminates clutter

JBL Reference 500 Series

>> The world can be a noisy place, often filled with people who didnt get the memo about cell phone courtesy. Thats why JBL developed Reference 500 Series noise-canceling headphones. Now you can concentrate on your favorite music in all its full-spectrum glory, without the distraction of all the commotion around you. Choose a compact, on-ear model that automatically blocks out up to 70% of ambient noise, or an over-ear design that lets you dial up your preferred level of glorious silence, from library-like to complete-and-total.
>> 100% of what you want.
70 to 100% less of everything else.
It may look like Grand Central Station. But it sounds like Carnegie Hall.
JBL Reference 510 >> Compact on-ear design >> 40mm Transducers deliver JBL realism and great bass response >> Eliminates up to 70% of ambient noise >> Ideal for airplanes, commuter trains >> Inline battery-powered control >> Adjustable padded headband >> Folds for easy storage

JBL Reference 520 >> Midsize over-ear design >> Advanced transducers deliver unsurpassed fidelity >> Crystal-clear high- and mid-frequency response, distortion-free bass >> Four noise-canceling settings, including total isolation >> Voice pass button for all settings >> Genuine leather headband and ear cups >> Innovative headband designed for hours of comfort >> Single cloth-covered side cable eliminates clutter

JBL Reference 600 Series

>> Bluetooth isnt just for cell phone headsets any more. The JBL 600 Series combines the sound quality of high-end headphones with the convenience of Bluetooth wireless technology. So now you can enjoy and control your music without wires and without digging your iPod out of your backpack or briefcase. Bluetooth is about making things easier, and JBL is about making things sound better. Together, well, maybe paradigm shift is too strong, but you get the idea.
JBL Reference 610 >> Midsize over-ear design >> Wired or wireless functionality >> Connects wirelessly to iPod >> Adjust volume, select tracks, play and pause, and browse menus when in iPod navigation mode, all from the ear cup controls >> Advanced transducers deliver unsurpassed fidelity >> Crystal-clear high- and mid-frequency response, distortion-free bass
>> The most advanced audio technologies meet
the most advanced communications technologies.
>> Genuine leather headband and ear cups >> Innovative headband designed for hours of comfort
>> Compare and contrast
with everything else out there.
JBL Reference 210 Color: Input Requirement: Black/Chrome Main connection 3.5mm mini jack
JBL Reference 220 Black or White with Chrome Main connection 3.5mm mini jack
JBL Reference 410 Black Main connection 3.5mm mini jack
JBL Reference 510 Black Main connection 3.5mm mini jack Color: Input Requirement:
JBL Reference 420 White or Black with Chrome Main connection 3.5mm mini jack
JBL Reference 520 White or Black with Chrome Main connection 3.5mm mini jack
JBL Reference 610 White or Black with Chrome iPod dongle connects to iPod models 4th generation and above, Bluetooth A2DP and AVRCP profile streaming 40mW 96dB SPL/mW @ 1kHz 10Hz 20kHz (10dB) Diameter 102mm Hardwire audio cable 1.75m 212g (without cord) 32 Ohms

Power: Sensitivity: Frequency Response: Dimensions:

5mW 94dB/mW @ 1kHz

50mW 125dB SPL/V 110dB SPL/mW 10Hz 20kHz (10dB points) Wire length 1.5m
50mW 125dB SPL/V 110dB SPL/mW 12Hz 28kHz Wire length 180cm
2 x 50mW 91dB SPL/mW @ 1kHz 10Hz 20kHz (10dB) Diameter 102mm Main audio cable 1.5m Extension cable 1m 170g (without cord) 32 Ohms
85mW 96dB SPL/mW @ 1kHz 10Hz 20kHz (10dB) Diameter 102mm Main audio cable 1.5m Extension cable 1m 192g (without cord) 32 Ohms Max 25dB > 1.5kHz Max 15dB < 1.5kHz
17Hz 23kHz Diameter 15mm Wire length 115cm 5.2g 17 Ohms
20Hz 20kHz Diameter 13.5mm Wire length 111cm 4g (without cord) 16 Ohms
Weight: Input Impedance: Noise-Canceling: Compatibility:
73g (without cord) 32 Ohms
73g (without cord) 32 Ohms Max 25dB > 1.5kHz Max 15dB < 1.5kHz
All audio output devices with a 3.5mm mini jack.
May be compatible with Bluetooth devices with A2DP and AVRCP profiles.
>> If youre in the mood to share your music,

JBL suggests.

>> Over the last few years, JBL has become a major manufacturer of award-winning loudspeaker systems for computers, the iPod and other multimedia devices. Check out these and other innovative JBL systems at jbl.com or a retailer near you. Theyre small. Theyre cool. And theyre pure JBL.
JBL On Stage* II The iPod dock that knows how to party.
JBL On Stage* Micro Macro performance, AC or battery power.
JBL On Tour Great sound, wherever your travels take you.
JBL On Time The clock radio thats playing your song.
JBL Radial Surround your iPod with legendary JBL sound.
JBL Spot 2.1-Channel sound, available in a range of colors and patterns.
JBL Spyro Multimedia sound gets personal.
JBL Creature II Plug-and-play nicer. Much nicer.
JBL Duet True JBL sound. Just two speakers.

User Guide English.2 Deutsch..9 Franais.15 Espaol.. 21 Italiano. 27 Dutch. 33 Korean.. 39 Norwegian. 45 Danish.51 Japanese.. 57. Simplified Chinese. 63

jbl reference series

Bluetooth
wireless headphones for iPod
Important Safety Instructions
Please read the following precautions before use:

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
Read these instructions, heed all warnings, and keep for future reference. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings; a minimum distance of 10mm around the entire apparatus is required for sufficient ventilation. No naked flame sources such as lighted candles should be placed on or near apparatus. Attention should be drawn to the environmental aspects of battery disposal. Apparatus is to be used in moderate climates only. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatuses (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarizing plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or third prong is provided for safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched, particularly at the plugs and convenience receptacles, and at the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS INSIDE THIS UNIT. PLEASE REFER SERVICING TO QUALIFIED HARMAN CONSUMER GROUP, INC.SERVICE PERSONNEL. Never remove grille covers in order to service the speaker system. The speaker system does not contain any user-serviceable parts.
THE LIGHTNING FLASH AND ARROWHEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU TO DANGEROUS VOLTAGE INSIDE THE PRODUCT.
CAUTION: TO REDUCE THE RISK OF SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU TO IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT.
!ATTENTION! It is considered good practice to connect the AC charger cable to your headphone prior to plugging charging device into power source.
WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUID, SUCH AS VASES, SHOULD BE PLACED ON THE APPARATUS.

jbl reference series 610

Safety Instructions
Headphone/earphone listening at high volume levels may cause permanent damage to your hearing. Always set the volume control to the lowest level before switching to different sources (tuner, CD player, MP3 player, etc.) or before plugging in the headphones/earphones. For your safety, do not use headphones/earphones while driving or cycling.

Welcome

Thank you for purchasing the JBL Reference Series 610 wireless headphone system. These headphones incorporate 60 years of JBLs professional audio experience and technology, setting a new standard for Bluetooth wireless headphone systems.

Introduction

JBL is proud to bring you the JBL Reference Series 610 wireless headphone system. This wireless headphone system streams high-fidelity digital sound from your audio device to your headphones. With the included Bluetooth transmitter attached to your iPod, you can stream music to your JBL 610 wireless headphones as far as 10 meters away from the music source. With no wires to tangle or restrict your movement, and the volume and track controls conveniently located on the headphones, the JBL Reference Series 610 is both the ultimate in portable audio convenience and the pinnacle of audio quality. The JBL Reference 610 is compatible with most Bluetooth-enabled devices, music players, cell phones and laptops. Enabled with Bluetooth A2DP (Advanced Audio Delivery Protocol) and AVRCP (Audio/Video Remote Control Protocol), the JBL 610 can stream high-quality sound. The JBL Reference Series 610 has raised the bar for high-performance, wireless, portable headphone systems and has earned the right to be a part of the JBL Reference Series family.

Package Contents

1. JBL Reference Series 610 Headphones 2. Carrying Case 3. Bluetooth Transceiver 4. Stereo Phono Adapter 5. Dual Airline Adapter 6. Battery Charger 7. 1.75-Meter Optional Audio Cable
using your jbl reference series 610 wireless headphones

Charging Your Headphones

To optimize your JBL 610 headphone systems performance, the unit must be fully charged prior to operation. 1. Select the proper regional AC adapter plug and assemble onto your battery charger by sliding the plug into the receptacle cavity. (To remove the adapter plug, press the release lever on the charger housing and slide plug in the direction shown.) 2. Connect the mini USB plug on your battery charger to the charge port located on the left ear cup of your headphones. 3. Connect to power outlet and begin charging. Your headphones should reach a complete charge in three (3) hours.
Push and hold to remove adapter
JBL Reference 610 Automatic Power Saving Mode

Power button

To extend the single charge battery playing time of your JBL Reference 610 Wireless Headphone, a power OFF feature has been built into the system. After 30 minutes of in-activity the headphone will automatically power off. The Bluetooth Transceiver will also shut down and no longer draw power from the iPod. To re-activate your JBL Reference 610 headphone proceed as follows: 1. Disconnect the JBL Bluetooth Transceiver from the iPod 2. Press Power Button located on the left ear cup (you will see the blue LED light up) 3. Connect the Bluetooth Transceiver to the iPod The headphone and Bluetooth Transceiver will now re-link with each other.
Starting Up Your Headphones and the Bluetooth Transceiver
The JBL Reference Series 610 is designed for use with iPod generations 4G and above. For your hearing safety, please adjust your iPod volume to the minimum position prior to powering up your headphones. 1. Power On your headphones by pressing the power button located on the left ear cup. The blue LED on the headphone will light up (at first solid, followed by three consecutive, quick flashes indicating that headphones are ready to be discovered). Plug in your dongle after headphone system is in discoverable mode. The LED on the mating transceiver will start to blink rapidly, indicating pairing with each other. (To power Off headphones, press power button.) 2. Connect the Bluetooth transceiver to the mating Omni connector on the base of your iPod. Connecting the transceiver will automatically power up your iPod. 3. Once the headphones and Bluetooth transceiver are paired and connected, the blue LED on the headphones and the transceivers LED will blink slowly and intermittently. You are now ready to use your wireless headphone system. (Note: Pairing of the headphones and transceiver may take up to one minute.) 4. If Bluetooth connection is lost due to moving out of transmission range, move closer to the iPod and press the play/pause button >. It will re-pair to the Bluetooth transceiver. Blue LED

Blue LED

Navigating Your Headphone Controls
The navigation controls are all conveniently located on the right ear cup.
Using Your Headphones With Other Bluetooth Devices
The JBL Reference Series 610 headphones can also be used with other Bluetooth music devices. The Bluetooth product must be enabled with the A2DP (Advanced Audio Distribution Profile). This will allow streaming of music to your headphones. A Bluetooth device with both A2DP and AVRCP (Audio/Video Remote Control Profile) will stream music and allow functionality of the Music Playing Mode control features. 1. Make sure headphone power is Off and transceiver is disconnected from the iPod. 2. Turn headphone power back On and wait for solid LED, then three quick flashes indicating that the headphone system is in discoverable mode. 3. To pair your Bluetooth-enabled device to the headphones, please refer to your users manual for the proper setup procedure. 4. When your audio device requests a passcode to pair with the JBL Reference Series 610 headphone system, enter the numerical sequence 0000. Note: The headphone control features may be limited when used with devices other than your iPod, due to the varying designs and possible remote control limitations of your audio device.

Music Playing Mode

1. The volume _ and + buttons are controlled by pressing to make your selection. Repeated pressing will reduce or increase volume, as desired. If you do not notice a change in the volume, make sure your iPod does not have a low battery. 2. Located on the four-position toggle switch are: _ ( ) menu (push once to take you to menu mode) _ (<<) previous track (push once), fast rewind (press and hold) _ (>>) next track (push once), fast forward (push and hold) _ (>) play/pause (press once to play, once to pause)
Using Your Headphones in Passive Mode
For situations when you are not able to use your Bluetooth wireless mode to stream music, the JBL Reference Series 610 headphones can be connected to your audio device through the included audio cable. Make sure the volume on your audio device is turned to the minimum position, to ensure hearing safety, prior to connecting your headphones. 1. Turn the power Off on your headphones. 2. Plug the mini USB connector on your audio cable into the headphone charging port. 3. Plug the 3.5mm mini stereo jack end into the audio devices mating port. 4. The control features buttons will not be functional when the headphone system is used with the audio cable.

Menu Mode

Menu mode brings up a second tier of iPod navigation features, which let you roam through your iPod menus. 1. Push menu button ( ) once to take you to the menu mode. 2. To scroll up (<<) or down (>>) the menu, hold down the proper feature button until you reach your selection. 3. To make a selection from the menu list, push and hold the menu button ( ). 4. In the menu mode, pressing and holding play/pause > allows you to turn your iPod on or off remotely from your headphones.

Menu Mode Features

troubleshooting your jbl reference series 610
Symptom when used with Bluetooth transceiver Possible Problem Solution Note Symptom when used with Bluetooth transceiver Headphone controls have intermittent operation. Possible Problem Bluetooth transceiver is not connected properly. May be moving out of Bluetooth range. Solution Make sure transceiver is connected properly. Move closer to iPod. Bluetooth does not have good transmission through metal or water. If blue LED on headphones continues to blink rapidly after headphone system has paired, it is indicating a low battery. A monotone will also be sounded every 5 seconds for low battery alert. Note

Sound Quality

No sound from headphones. Headphone system is not powered On. Press down power button. Blue LED should go from solid to three consecutive, fast blinks, indicating that its ready to be discovered by transceiver or other audio source. If blue LED on headphones continues to blink rapidly after headphone system has paired, it is indicating a low battery. A monotone will also be sounded every 5 seconds for low battery alert. Blue LED on transceiver should start blinking.
Rechargeable headphone battery is low.
Charge headphones by following the battery charging directions in this User Guide.
Headphone battery is low.
Bluetooth transceiver is not receiving power. iPod battery is low.
Make sure iPod power is on and the transceiver connector is engaged correctly. Charge your iPod in accordance with the battery charging directions given in your iPod users guide. 1. Press the play/pause button and the headphone system will re-pair itself with the transceiver. 2. Move back to within Bluetooth connection range. 3. Unplug your transceiver and replug it in to initiate connection. Make sure transceiver is connected properly. Make sure connectors are mating correctly to your headphones and audio device. Charge iPod according to iPod charging instructions. See whether you have iPod maximum volume setting.

The iPod may have a low battery. Sound drops in and out. Distortion (static, crackling or hissing sounds). Moving out of transmission range. Noise may be caused by interference from a monitor, cell phone or other transmitting device. If using audio cable, headphone system may be overdriven by an amplified audio source.
Charge iPod according to iPod charging instructions. Move closer to the iPod or change position. Turn monitor off to see whether noise is eliminated. Use headphones further away from monitor. Ensure that the JBL Reference Series 610 is connected to an appropriate source device. Make sure cables are inserted snugly into receptacles. Reduce volume on the audio source.
No sound from headphones.
Headphone has lost the link with the Bluetooth transceiver.
Blue LED should start blinking rapidly (indicating pairing). You may have lost the link because you are too far from the iPod. Move closer and try again.
Sound comes from only one side/channel.
Bluetooth transceiver is not connected properly. If using audio cable, connection at mini USB or 3.5mm audio inlet end may not be connected properly.
Volume is low and will not increase when + feature is selected.
The iPod may have a low battery. Your iPod may have a maximum volume setting that is On.
Symptom when used with Bluetooth transceiver

Possible Problem

Solution

Pairing

Audio device does not pair with headphones. Audio device does not support A2DP profiles. Headphone system is not powered On. Audio device is not compatible. Verify with manufacturer. Press down on power button. Blue LED should go from solid to three consecutive, fast blinks, indicating that its ready to be discovered by transceiver or other audio source. If LED has intermittent, slow blinks on both dongle and headphones, both devices are connected. If you wish to re-pair, please follow initial pairing instruction.

Control Features

Headphone controls do not work Audio device is not compatible with Bluetooth audio device. with AVRCP profile. Headphone controls have limited operation. Audio device does not recognize some control features. Audio device is not compatible. Verify with manufacturer. Contact your audio device manufacturer to check limitations. Because of the large variation in design, the control features may be limited due to restrictions on your audio device.
No sound from headphones. Headphone system has lost the link with the audio device. If using audio cable, connection at mini USB or 3.5mm audio inlet end may not be connected properly. Sound drops in and out. Moving out of transmission range. Audio device is dropping transmission. Headphone battery is low. Follow your audio devices user guide instructions to re-pair the Bluetooth connection. Make sure connectors are mating correctly to your headphone and audio device. Make sure headphone power is Off. Move closer to audio device or change position. Contact audio device manufacturer for guidance. Charge headphones by following If blue LED on headphones the battery charging directions in continues to blink rapidly after this User Guide. headphone system has paired, it is indicating a low battery. A monotone will also be sounded every 5 seconds for low battery alert. Turn monitor off to see whether noise is eliminated. Use headphones further away from monitor. Ensure that the JBL Reference Series 610 is connected to an appropriate source device. Make sure cables are inserted snugly into receptacles. Reduce volume on the audio source.

USB 3.5

iPod iPod On

iPod iPod iPod

A2DP On

AVRCP

iPod Off On dongle iPod 5 USB 3.5 Off 5
iPod Dongle iPod Dongle Harman Consumer Group, Inc. JBL 610 / 1kHz 96dB SPL/mW iPod Dongle iPod A2DP AVRCP

JBL 610

40mm 2 x 50mW 20Hz 20kHz (10dB) 102mm 1.75m 212g 32 ohms

A2DP AVRCP 3.5mm 810

Harman Consumer Group, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA 1.516.255.4525 (USA only)
www.jbl.com Made in China. 2006 Harman International Industries, Incorporated. All rights reserved. JBL and Harman International are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. iPod is a trademark of Apple Computer, Inc., registerd in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JBL is under a license agreement. Fabriqu en Chine. 2006 Harman International Industries, Incorporated. Tous droits rservs. JBL et Harman International sont des marques commerciales de Harman International Industries, Incorporated, dposes aux tats-Unis et/ou dans dautres pays. iPod est une marque commerciale de Apple Computer, Inc., dpose aux tats-Unis et dans dautres pays. La marque et les logos Bluetooth appartiennent Bluetooth SIG, Inc. et sont utiliss sous licence par JBL
Document Number: 950-0169-001