3-095-629-12(1)

N Getting started

Unpacking
Check that you have the following items: The headphones (1)
Rest the headphones on the transmitter so that the transmitters POWER/CHG indicator lights in red.
Please place the headphones on the transmitter so that the triangle arrow would be matched. If the headphones are not properly placed, it will not be charged. Charging will take about 16 hours, after which the POWER/CHG indicator will go off.

Headphones

Battery life
(Using Sony alkaline batteries LR03/AM-4 (N))
Model MDR-RF840RK MDR-RF860RK Approx. hours*hours*hours*2
Connect the supplied AC power adaptor to the transmitter.
*1 at 1 kHz, 1 mW+1 mW output *2 Time stated above may vary, depending on the temperature or conditions of use.
B MDR-RF860RK Press the TUNING button briefly for automatic tuning of the headphones. If you do not receive a clear audio signal, press it again. When tuning has completed, turn up the volume to a moderate level with the VOLUME control on the right housing.

Replacing the ear pads

The ear pads are replaceable. If the ear pads become dirty or worn out, replace them as illustrated below. The ear pad is not commercially available. You can order replacements from the store where you purchased this system, or at your nearest Sony dealer.

Troubleshooting

No sound/Muffled sound
, Check the connection of the audio/video equipment or the AC power adaptor. , Check that the audio/video equipment is turned on. , Turn up the volume on the connected audio/ video equipment, if the transmitter is connected to the headphones jack. , Change the radio frequency with the CHANNEL selector switch on the transmitter, then set to the same radio frequency with the TUNING selector (or TUNING button) on the right housing of the headphones. , The mute function is activated. Use the headphones near the transmitter. , The headphones POWER indicator light turns off, dims, flashes, or sound becomes distorted or noisy. Charge the rechargeable battery if it is weak, or replace alkaline batteries with new ones. If the POWER indicator is still off after charging the battery, take the headphones to a Sony dealer.

Svenska

Hrmed intygar Sony Corp. att denna utrustning str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Fr ytterligare information g in p fljande hemsida: http://www.compliance.sony.de/

3 CHANNEL

R DC IN 12V

L INPUT

To DC IN 12V jack Transmitter To an AC outlet

VOLUME

VOLUME control

Notes on Batteries

Do not charge a dry battery. Do not carry a dry battery together with coins or other metallic objects. It can generate heat if the positive and negative terminals of the battery accidentally come into contact with metallic objects. If you are not going to use the unit for a long time, remove the batteries to avoid damage from battery leakage or corrosion.

TUNING button

Remove the old ear pad by pulling it out of the groove on the housing.
Undertegnede, Sony Corp. erklrer herved, at flgende udstyr overholder de vsentlige krav og vrige relevante krav i Direktiv 1999/5/EF. For yderligere information g ind p flgende hjemmeside: http://www.compliance.sony.de/
Wireless Stereo Headphone System

Operating Instructions

TUNING
AC power adaptor (supplied)
Sending RF signals from the transmitter Notes
Use only the supplied AC power adaptor. Do not use any other AC power adaptor. The transmitter starts sending RF signals automatically when it detects an audio signal from the connected equipment. If it does not detect an audio signal for more than about 4 minutes, the transmitter will stop sending RF signals, and the POWER/CHG indicator will turn off. When the transmitter receives an audio signal again, it starts sending the RF signals, and the POWER/CHG indicator will light up green again. If the audio signal is very weak, the transmitter does not send RF signals. If the transmitter is connected to a headphone jack, make sure the volume of the equipment connected is set to 5 - 6 or higher. You may not hear the beginning of the sound from the headphones until the transmitter starts sending the RF signals after detecting an audio signal.

The transmitter (1)

Sony Corp. vakuuttaa tten ett tm laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Halutessasi listietoja ky osoitteessa: http://www.compliance.sony.de/
Checking the remaining battery power
Pull up the self-adjusting band and check the POWER indicator located on the right housing. The battery is still serviceable when the indicator lights in red. Charge the rechargeable battery or install new dry batteries if the POWER indicator light dims, flashes, or the sound becomes distorted or noisy.

AC power adaptor (1)

POWER/CHG indicator

Transmitter

Polarity of the plug
Place the new ear pad on the driver unit.
Hang the edge of the ear pad on one side of the driver units groove edge, then turn the edge of ear pad around the driver unit as illustrated below. When the ear pad is securely inserted into the groove, adjust the ear pad to the vertical position.
Note About the charging method of the system
This system employs a contactless charge method that requires no terminals by the electromagnetic induction. The rechargeable nickel-metal hydride battery should be replaced with new one when they last only half the expected time after a proper recharging. The rechargeable battery type BP-HP550-11 is not commercially available. You can order the battery from the store where you purchased this system, or at your nearest Sony dealer.
Connecting cord (1) (phono plugs y stereo miniplug), 1 m
When the transmitter is placed on or near a TV, it may pick up a noise. In such a case, place the transmitter away from the TV. If the connected equipment has the AVLS (Automatic Volume Limiter System) function, be sure to turn the function off when using the transmitter. Otherwise, you will have to turn up the volume of the headphones, and that may cause noise.

Distortion

, If the transmitter is connected to the headphones jack, turn down the volume on the connected audio/video equipment. , Change the radio frequency with the CHANNEL selector switch on the transmitter, then set to the same radio frequency with the TUNING selector (or TUNING button) on the right housing of the headphones. , The headphones POWER indicator light turns off, dims, flashes, or sound becomes distorted or noisy. Charge the rechargeable battery if it is weak, or replace alkaline batteries with new ones. If the POWER indicator is still off after charging the battery, take the headphones to a Sony dealer.
Sony Corp. erklrer herved at utstyret er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 1999/5/EF. G til denne URL-en for mer informasjon: http://www.compliance.sony.de/
Do not leave any metallic objects (coin, clip, etc.) near the transmitters charging point. The transmitter and the metal might become hot and it is dangerous.

Charging point

N Operating the system
The headphones automatically turn off when they are taken off Auto power on/off function
Do not pull up the self-adjusting band when not in use, as this will consume the battery power.
Sony Corp. 1999/5/EK. : http://www.compliance.sony.de/
Unimatch plug adaptor (1) (stereo mini jack y stereo phone plug)
Setting up the transmitter 1 Connect the transmitter to audio/video

equipment.

Select one of the hookups below depending on the jack type:

Listening to a programme

Before listening
To reduce the risk of hearing damage, first lower the volume.
Rechargeable nickel-metal hydride battery BP-HP550-11 (1)
Do not leave any objects susceptible to magnetism (cash cards, floppy disks with magnetic coding, etc.) near the system. Exposure to the transmitters electromagnetic field may render them unusable.
A To connect to a headphones jack
Transmitter To INPUT A jacks
Turn on the audio/video equipment connected to the transmitter.
If the transmitter is connected to the headphone jack, set the volume control of the audio source equipment as high as possible but not so high that the audio signal becomes distorted.

Selfadjusting band

N Additional information

Franais

Par la prsente, Sony Corp. dclare que ce type dappareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Pour toute information complmentaire, veuillez consultez lURL suivante : http://www.compliance.sony.de/

Precautions

If the transmitter is not to be used for a long period of time, disconnect the AC power adaptor from the AC outlet by holding the plug. Do not pull on the cord. Do not leave the wireless stereo headphone system in a location subject to direct sunlight, heat or moisture.

Loud background noise

, Move closer to the transmitter. As you move away from the transmitter, more noise is likely to be heard. , If the transmitter is connected to the headphones jack, turn up the volume of the connected audio/video equipment. , Change the radio frequency with the CHANNEL selector switch on the transmitter, then set to the same radio frequency with the TUNING selector (or TUNING button) on the right housing of the headphones. , The headphones POWER indicator light turns off, dims, flashes, or sound becomes distorted or noisy. Charge the rechargeable battery if it is weak, or replace alkaline batteries with new ones. If the POWER indicator is still off after charging the battery, take the headphones to a Sony dealer.

Remove the headphones from the transmitter.
The transmitters POWER/CHG indicator lights up green.

Deutsch

Hiermit erklrt Sony Corp., dass sich dieses Gert in bereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet. Weitere Informationen erhltlich unter: http://www.compliance.sony.de/
If hiss is heard, move closer to the transmitter. You may hear some noise when you disconnect the AC power adaptor from the transmitter before turn off the headphones.

MDR-RF840RK MDR-RF860RK

2007 Sony Corporation Printed in China
Charging the supplied rechargeable battery
The supplied rechargeable nickel-metal hydride battery is not charged from the first time you use it. Be sure to charge it before use. To charge the headphones, place them on the transmitter.
Notes on headphones To reduce the risk of hearing damage
Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.

Rechargeable battery

Noise Reduction process (MDR-RF860RK only)
Right channel (red) Transmitter Left channel (white) Headphones

Lines of magnetic force

1 WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
To reduce the risk of fire or electric shock, do not place objects filled with liquids, such as vases, on the apparatus. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Connect AC power adaptor to an easily accessible AC outlet. Should you notice an abnormality in AC power adaptor, disconnect it from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose the battery to excessive heat such as direct sunlight, fire or the like.
Press the PUSH button of the left housing to open the battery compartment lid.
The battery compartment lid comes off.

Welcome!

Thank you for purchasing the Sony MDR-RF840RK/ RF860RK Wireless Stereo Headphone System. Before operating the unit, please read this manual thoroughly and retain it for future reference. Some features are: A compact transmitter enables simple charging by a contactless charge method that requires no terminals by the electromagnetic induction. Just by placing the headphones on the transmitter, the headphone battery can be charged. Automatic ON/OFF function on headphones to preserve battery power. Noise reduction system to reproduce a clear sound with minimum transmission noise. (MDR-RF860RK only) Wireless system that allows you to listen to a program free from the restriction of a cord High fidelity sound reproduction Easy connection with TV and HiFi Audio system equipment Up to 100 meters reception range Volume control function on the headphones. Comfortable Circum-aural headphone with self adjusting head band.

dynamic range

Do not place a radio near the system. A noise may be heard from the radio. In such a case, change the angle of the radio or move away from the system so that a noise is not heard.
Connecting cord (supplied)
The transmitter unit compresses the audio signal and converts it to RF signal. The headphones unit converts the received RF signal to an audio signal and decompresses it. This process reduces noise picked up during transmission.
Transmitter unit Headphones unit

RF transmission

Espaol
Por medio de la presente, Sony Corp. declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Para mayor informacin, por favor consulte el siguiente URL: http://www.compliance.sony.de/

Caring for others

Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to the people around you. If you have any questions or problems concerning the system that are not covered in this manual, please consult your nearest Sony dealer. Be sure to bring the headphones and the transmitter to the Sony dealer when requiring repair work.

input signal

output signal

Specifications

General
Carrier frequency 863.52 MHz, 864.02 MHz, 864.52 MHz Channel Ch1, Ch2, Ch3 Modulation FM stereo Frequency response MDR-RF840R: 20 20,000 Hz MDR-RF860R: 10 22,000 Hz
When the transmitters POWER/CHG indicator does not light up red
Check if the right and left headphones are rested on the transmitter correctly. Remove the headphones and replace them on the transmitter again so that the POWER/CHG indicator lights in red.

Nederlands

Hierbij verklaart Sony Corp. dat dit apparaat in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Nadere informatie kunt u vinden op: http://www.compliance.sony.de/

compression

decompression

noise level (low)

Unimatch plug adaptor (supplied) To headphones jack (Stereo phone jack) To headphones jack (Stereo mini jack) WALKMAN*, TV, etc.

PUSH button

Select the radio frequency with the CHANNEL selector switch.

To recharge the headphone battery after use
Insert the supplied rechargeable nickelmetal hydride battery into the battery compartment matching the 3 terminal on the battery to the 3 mark in the compartment.
Do not use rechargeable battery other than the supplied one.
Place the headphones on the transmitter after use. Since the built-in timer recognizes when charging is complete, there is no need to remove the headphones from the transmitter after charging.
1 The transmitter unit compresses the audio signals dynamic range, then converts it to RF signal. 2 Noise may occur due to long distance transmission, etc. 3 The headphones unit converts the RF signal to an audio signal. 4 Noise may occur during conversion. 5 Decompression of the audio signals dynamic range reduces the noise level and improves the S/N (signal-to-noise) ratio.

Italiano

Con la presente Sony Corp. dichiara che questo apparecchio conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Per ulteriori dettagli, si prega di consultare il seguente URL: http://www.compliance.sony.de/
Transmitter TMR-RF840R, RF860R
Power source DC 12 V: supplied AC power adaptor Audio input Phono jacks, stereo mini jack Dimensions Approx. 96 mm (8 5/1/7/8 in) (w/h/d) Mass Approx. 220 g (7.77 oz) Rated power consumption 3W
The transmitter automatically stops sending RF signals while charging the battery. This system is designed to charge only the supplied rechargeable battery type BP-HP550-11 for safety. Note that other types of rechargeable batteries cannot be charged with this system. If dry batteries are installed, they cannot be charged. Do not attempt to use the supplied BP-HP550-11 rechargeable battery for other components. They are for use with this system only. Charge in an environmental temperature of between 0 C and 40 C (between 32 F and 104 F).
B To connect to LINE OUT or REC OUT

Put on the headphones.

When you put on the headphones, the headphones power turns on automatically. The POWER indicator on the right housing glows red. Be sure to put the right housing R on your right ear and the left housing L on your left ear. Wear the headphones vertically on your head so that auto power on function is properly activated.
Transmitter To INPUT B jack
The effective areas of the transmitter
The optimum distance is up to approximately 100 m without the system picking up some interference. However, the distance may vary depending on the surroundings and environment. If the system picks up some noise within the above mentioned distance, reduce the distance between the transmitter unit and the headphones, or select another channel.

Portugus

A Sony Corp. declara que este equipamento est conforme com os requisitos essenciais e outras provises da Directiva 1999/5/CE. Para mais informaes, por favor consulte a seguinte URL: http://www.compliance.sony.de/
Hereby, Sony Corp., declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For details, please access the following URL : http://www.compliance.sony.de/
Headphones MDR-RF840R, RF860R
Power source Supplied rechargeable nickel-metal hydride battery BP-HP550-11 or commercially available (size AAA) dry batteries Mass Approx. 300 g (10.59 oz) incl. Battery
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Notes on receiving performance
This system utilizes very high frequency signals in the 800 MHz band so the receiving performance may deteriorate due to the surroundings. The following examples illustrate conditions that may reduce the reception range or cause interference. Inside a building with walls containing steel beams. An area with many steel file cabinets, etc. An area with many electrical appliances capable of generating electromagnetic fields. The transmitter is placed on a metal instrument. An area facing a roadway. Noise or interfering signals exist in the surroundings due to radio transceivers in trucks, etc. Noise or interfering signals exist in the surroundings owing to wireless communication systems installed along roadways.
Close the battery compartment lid.
1Insert the tab into the hole at the upper left. 2Close the lid until it clicks.

Charging and usage hours

Approx. charging hours*hour 16 hours*2 Approx. usage time*1 MDR-RF840RK MDR-RF860RK 60 minutes*minutes*hours*hours*3 Connecting cord (supplied)

When you use the headphones inside the effective areas of the transmitter, the transmitter can be placed in any direction from the listener. Even within the signal reception area, there are some spots (dead spots) where the RF signal cannot be received. This characteristics is inherent to RF signals, and does not indicate malfunction. By slightly moving the transmitter, location of the dead spot can be changed.
Design and specifications are subject to change without notice.
*1 at 1 kHz, 1 mW+1 mW output *2 hours required to fully charge an empty battery *3 Time stated above may vary, depending on the temperature or conditions of use.

Left channel (white)

Set the channel to that of the transmitter with the selector (or button) on the right housing of the headphones.
A MDR-RF840RK Select the channel to that of the transmitter with the TUNING selector on the right housing of the headphones. When tuning has completed, turn up the volume to a moderate level with the VOLUME control on the right housing.
Using the headphones with dry batteries (sold separately)

Right channel (red)

Commercially available (size AAA) dry batteries can also be used to power the headphones. Install the batteries in the same manner as described in steps 1 through 3 of Charging the supplied rechargeable battery. When dry batteries are installed, the battery charge function will not be activated.
To LINE OUT or REC OUT jacks
Stereo system, VCR, etc. VOLUME control

TUNING selector

3 VOLUME

To DC IN 12V jack

Transmitter To an AC outlet AC power adaptor (supplied)
* WALKMAN and WALKMAN logo are registered trademarks of Sony Corporation.