Reviews & Opinions
Independent and trusted. Read before buy Pioneer DEH-1950!

Pioneer DEH-1950

Manual

Download (English)
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Pioneer DEH-1950About Pioneer DEH-1950
Here you can find all about Pioneer DEH-1950 like wiring diagram and other informations. For example: manual.

Pioneer DEH-1950 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Pioneer DEH-1950 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Pioneer DEH-1950 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

English

Operation Manual

CD Receiver

Espaol

DEH-1950 DEH-1950G

Portugus (B)

Contents

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference.
Setting the AM tuning step 9 Switching the auxiliary setting 9 Additional Information Error messages 10 Handling guideline of discs and player 10 Dual Discs 10 Specifications 12
Before You Start About this unit 3 Visit our website 3 Protecting your unit from theft 3 Removing the front panel 3 Attaching the front panel 3 Operating this unit Whats What 4 Head unit 4 LCD display 5 Basic Operations 5 Turning the unit on and selecting a source 5 Adjusting the volume 5 Turning the unit off 5 Tuner 5 Listening to the radio 5 Storing and recalling broadcast frequencies 6 Tuning in strong signals 6 Storing the strongest broadcast frequencies 6 Built-in Player 6 Playing a disc 6 Repeating play 6 Playing tracks in random order 7 Scanning tracks of a CD 7 Pausing disc playback 7 Audio Adjustments 7 Using balance adjustment 7 Using the equalizer 7 Adjusting equalizer curves 8 Adjusting loudness 8 Adjusting source levels 8 Other Functions 8 Adjusting initial settings 8 Setting the clock 8 Setting the FM tuning step 9

Section

Before You Start About this unit

CAUTION

! Do not allow this unit to come into contact with liquids. Electrical shock could result. Also, this unit damage, smoke, and overheat could result from contact with liquids. ! Keep this manual handy as a reference for operating procedures and precautions. ! Always keep the volume low enough so that you can hear sounds from outside the vehicle. ! Protect this unit from moisture. ! If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. ! If this unit does not operate properly, contact your dealer or nearest authorized Pioneer Service Station.

Removing the front panel

1 Press DETACH to release the front panel. 2 Grab the front panel and remove.
3 Put the front panel into provided protective case for safe keeping.
Attaching the front panel
1 Slide the front panel to the left until it clicks. Front panel and the head unit are jointed on the left side. Make sure that the front panel has been jointed to the head unit. 2 Press the right side of the front panel until it is firmly seated.
# If you cant attach the front panel to the head unit successfully, try again. Front panel may be damaged if you attach the front panel forcedly.

Visit our website

Visit us at the following site:
! We offer the latest information about Pioneer Corporation on our website.
Protecting your unit from theft
The front panel can be detached to deter theft.
Important ! Handle gently when removing or attaching the front panel. ! Avoid subjecting the front panel to excessive shocks. ! Keep the front panel out of direct sunlight and high temperatures.

Operating this unit

Whats What

Head unit

1 AUDIO button Press to select various sound quality controls. 2 EQ button Press to select various equalizer curves. 3 SOURCE button, VOLUME This unit is turned on by selecting a source. Press to cycle through all the available sources. Press and hold to recall the initial setting menu when the sources are off. Rotate it to increase or decrease the volume. 4 CD loading slot Insert a disc to play. 5 EJECT button Press to eject a CD from your built-in CD player. 6 CLOCK button Press to change to the clock display. 7 AUX input jack (3.5 mm stereo jack) Use to connect an auxiliary equipment. 8 DETACH button Press to remove the front panel from the head unit.
9 PAUSE button Press to turn pause on or off. a LOUD button Press to turn loudness on or off. b 1 to 6 buttons Press for preset tuning. c a/b/c/d buttons Press to perform manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions. d BAND button Press to select among three FM bands and one AM band and to cancel the control mode of functions. e FUNCTION button Press to recall the function menu when operating a source.

LCD display

% Press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources: TunerBuilt-in CD playerAUX
Notes ! In the following cases, the sound source will not change: When there is no disc in the unit. When the AUX (auxiliary input) is set to off (refer to page 9). ! AUX is set to on by default. Turn off the AUX when not in use (refer to Switching the auxiliary setting on page 9). ! When this units blue/white lead is connected to the vehicles auto-antenna relay control terminal, the vehicles antenna extends when this units source is turned on. To retract the antenna, turn the source off.
1 Main display section Shows the various information such as band, play time, and other setting. ! Tuner Band and frequency are displayed. ! Built-in CD Player Erapsed play time is displayed. ! Audio and initial setup Function names and setup status are displayed. 2 Preset number/track number indicator Shows the track number or preset number. ! If a track number 100 or more is selected, d on the left of the track number indicator will light. 3 RPT indicator Shows when repeat play is turned on. 4 LOUD indicator Appears in the display when loudness is turned on. 5 Stereo (5) indicator Shows when the selected frequency is being broadcast in stereo. 6 LOC indicator Shows when local seek tuning is on.

Adjusting the volume

% Use VOLUME to adjust the sound level.

Turning the unit off

% Press SOURCE and hold until the unit turns off.

Listening to the radio

Important If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 9).

Basic Operations

Turning the unit on and selecting a source
You can select a source you want to listen to. To switch to the built-in CD player, load a disc in the unit (refer to the next page).
Press SOURCE to select the tuner.
2 Press BAND to select a band. Press BAND until the desired band (F1, F2, F3 for FM or AM) is displayed. 3 To perform manual tuning, briefly press c or d.
4 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found.
# You can cancel seek tuning by briefly pressing c or d. # If you press and hold c or d you can skip stations. Seek tuning starts as soon as you release the button.

Storing the strongest broadcast frequencies
BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 1 to 6. Once stored you can tune in to those frequencies with the touch of button. ! Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6. 1 Press FUNCTION to select BSM.
Storing and recalling broadcast frequencies
% When you find a frequency that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing. Memorized radio station frequency can be recalled by pressing the preset tuning button.
# Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory. # You can also use a and b to recall radio station frequencies assigned to preset tuning buttons 1 to 6.
2 Press a to turn BSM on. Six strongest broadcast frequencies will be stored in the order of their signal strength.
# To cancel the storage process, press b.

Built-in Player

Playing a disc
1 Insert a CD into the CD loading slot. Playback will automatically start.
# Be sure to turn up the label side of a disc. # After a CD has been inserted, press SOURCE to select the built-in CD player. # You can eject a CD by pressing EJECT.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Press FUNCTION to select LOCAL.
2 To perform fast forward or reverse, press and hold c or d. 3 To skip back or forward to another track, press c or d.
Notes ! Read the precautions with discs and player on page 10. ! If an error message such as ERROR-11 is displayed, refer to Error messages on page 10.
2 Press a or b to turn local seek tuning on or off. 3 Press c or d to set the sensitivity. FM: LOCAL 1LOCAL 2LOCAL 3 LOCAL 4 AM: LOCAL 1LOCAL 2 The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

Repeating play

Repeat play lets you hear the same track over again. 1 Press FUNCTION to select RPT.
2 Press c or d to select the repeat range. DSC Repeat all tracks
TRK Repeat just the current track
# If you perform track search or fast forward/reverse, repeat play is automatically cancelled. # To return to the normal display, press BAND.

Audio Adjustments

Using balance adjustment
Fader/balance setting creates an ideal listening environment in all occupied seats. 1 Press AUDIO to select FAD.

Playing tracks in random order
Random play lets you play back tracks on the CD in a random order. 1 Press FUNCTION to select RDM.
2 Press a or b to adjust front/rear speaker balance. FAD F15 to FAD R15 is displayed.
# FAD 0 is the proper setting when only two speakers are used.
2 Press a or b to turn random play on or off. When random play is on, RDM appears in the display.
# To return to the normal display, press BAND.
3 Press c or d to adjust left/right speaker balance. BAL L15 to BAL R15 is displayed.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of each track on the CD. 1 Press FUNCTION to select SCAN.

Using the equalizer

There are six stored equalizer settings such as DYNAMIC, VOCAL, NATURAL, CUSTOM, FLAT and POWERFUL that can easily be recalled at any time. ! CUSTOM is an adjusted equalizer curve that you create. ! When FLAT is selected no supplement or correction is made to the sound. % Press EQ to select the equalizer. Press EQ repeatedly to switch between the following equalizers: DYNAMICVOCALNATURALCUSTOM FLATPOWERFUL
2 Press a to turn scan play on. SCAN appears in the display. The first 10 seconds of each track is played. 3 When you find the desired track press b to turn scan play off.
# If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION. # After scanning of a CD is finished, normal playback of the tracks will begin again.

Pausing disc playback

Pause lets you temporarily stop playback of the disc. Press FUNCTION to select PAUSE. Press a or b to turn pause on or off.
# You can also turn pause on or off by pressing PAUSE. # To return to the normal display, press BAND.
Adjusting equalizer curves
You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM. 3 Press a or b to adjust the source volume. SLA +4 to SLA 4 is displayed as the source volume is increased or decreased.
Adjusting bass/mid/treble
You can adjust the bass/mid/treble level. 1 Press AUDIO to select BASS/MID/ TREBLE. 2 Press a or b to adjust the level. +6 to 6 is displayed as the level is increased or decreased.

Other Functions

Adjusting initial settings
Using the initial settings, you can customize various system settings to achieve optimal performance from this unit. 1 Press SOURCE and hold until the unit turns off. 2 Press SOURCE and hold until function name appears in the display. 3 Press FUNCTION to select one of the initial settings. Press FUNCTION repeatedly to switch between the following settings: ClockFM (FM tuning step)AM (AM tuning step)AUX (auxiliary input) Use the following instructions to operate each particular setting.
# To cancel initial settings, press BAND. # You can also cancel initial settings by holding down SOURCE until the unit turns off.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. Press AUDIO to select LOUD. Press a or b to turn loudness on or off.
# You can also turn loudness on or off by pressing LOUD.
3 Press c or d to select a desired level. LOW (low)HI (high)

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM tuner volume level, which remains unchanged. ! The AM tuner volume level can also be adjusted with source level adjustments. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. 2 Press AUDIO to select SLA.

Setting the clock

Use these instructions to set the clock. 1 Press FUNCTION to select clock.
2 Press c or d to select the segment of the clock display you wish to set. Pressing c or d will select one segment of the clock display: HourMinute 3
# To cancel clock settings, press BAND.
Press a or b to set the clock.
# You can also cancel clock settings by holding down AUDIO until the unit turns off.
Switching the auxiliary setting
It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. 1 Press FUNCTION to select AUX.
Turning the clock display on or off
You can turn the clock display on or off. ! Even when the sources are off, the clock display appears on the display. % Press CLOCK to turn the clock display on or off. Each press of CLOCK turns the clock display on or off.
# The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds.
2 Press a or b to turn the auxiliary setting on or off.

Setting the FM tuning step
The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz. ! If seek tuning is performed in 50 kHz steps, stations may be tuned in imprecisely. Tune in the stations with manual tuning or use seek tuning again. 1 Press FUNCTION to select FM.
2 Press c or d to select the FM tuning step. Press c to select 50 (50 kHz). Press d to select 100 (100 kHz).
Setting the AM tuning step
The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 kHz to kHz allowable) to 10 kHz (530 kHz to kHz allowable). 1 Press FUNCTION to select AM.
2 Press c or d to select the AM tuning step. Press c to select 9 (9 kHz). Press d to select 10 (10 kHz).

Appendix

Additional Information Error messages
When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error message.
Message Cause Action Clean disc. Replace disc. Turn the ignition ON and OFF, or switch to a different source, then back to the CD player.
ERROR-11, 12, Dirty disc 17, 30 ERROR-11, 12, Scratched disc 17, 30 ERROR-10, 11, Electrical or me12, 15, 17, 30, chanical A0

ERROR-15

The inserted disc Replace disc. does not contain any data The CD format Replace disc. cannot be played back CD-ROM is inserted Replace disc.

ERROR-22, 23

CD-ROM
Handling guideline of discs and player
! Use only discs featuring following logo.
! Do not use cracked, chipped, warped, or otherwise damaged discs as they may damage the player. ! Unfinalized CD-R/CD-RW disc playback is not possible. ! Do not touch the recorded surface of the discs. ! Store discs in their cases when not in use. ! Avoid leaving discs in excessively hot environments including under direct sunlight. ! Do not attach labels, write on or apply chemicals to the surface of the discs. ! To clean a CD, wipe the disc with a soft cloth outward from the center. ! Condensation may temporarily impair the players performance. Leave it to adjust to the warmer temperature for about one hour. Also, wipe any dump discs with a soft cloth. ! Playback of discs may not be possible because of disc characteristics, disc format, recorded application, playback environment, storage conditions and so on. ! Text information may not be correctly displayed depending on the recorded environment. ! Road shocks may interrupt disc playback. ! Read the precautions with discs before using them.

Dual Discs

! Dual Discs are two-sided discs that have a recordable CD for audio on one side and a recordable DVD for video on the other. ! Since the CD side of Dual Discs is not physically compatible with the general CD standard, it may not be possible to play the CD side with this unit.
! Use only conventional, fully circular discs. Do not use shaped discs.
! Use 12-cm or 8-cm CD. Do not use an adapter when playing 8-cm CDs. ! Do not insert anything other than a CD into the CD loading slot.

Additional Information

! Frequent loading and ejecting of a Dual Disc may result in scratches on the disc. Serious scratches can lead to playback problems on this unit. In some cases, a Dual Disc may become stuck in the disc loading slot and will not eject. To prevent this, we recommend you refrain from using Dual Disc with this unit. ! Please refer to the information from the disc manufacturer for more detailed information about Dual Discs.
Additional Information Specifications

General

Rated power source.. 14.4 V DC (allowable voltage range: 12.0 V to 14.4 V DC) Grounding system. Negative type Max. current consumption... 10.0 A Dimensions (W H D): DIN Chassis. 162 mm Nose.. 14 mm D Chassis. 162 mm Nose.. 14 mm Weight.. 1.3 kg Number of channels. 2 (stereo)

FM tuner

Frequency range.. 87.5 MHz to 108.0 MHz Usable sensitivity. 8 dBf (0.7 V/75 W, mono, S/N: 30 dB) Signal-to-noise ratio.. 75 dB (IEC-A network) Distortion.. 0.3 % (at 65 dBf, 1 kHz, stereo) 0.1 % (at 65 dBf, 1 kHz, mono) Frequency response.. 30 Hz to Hz (3 dB) Stereo separation.. 45 dB (at 65 dBf, 1 kHz)

AM tuner

Frequency range.. 531 kHz to kHz (9 kHz) 530 kHz to kHz (10 kHz) Usable sensitivity. 18 V (S/N: 20 dB) Signal-to-noise ratio.. 65 dB (IEC-A network)
Continuous power output. 22 W 4 (50 Hz to Hz, 5% THD, 4 W load, both channels driven) Maximum power output. 50 W 4 Load impedance.. 4 W (4 W to 8 W allowable) Preout max output level/output impedance... 2.2 V/1 kW Bass/Mid/Treble: Bass Frequency. 100 Hz Gain.. 13dB Mid Frequency. 1 kHz Gain.. 12 dB Treble Frequency. 10 kHz Gain.. 12 dB Loudness contour: Low.. +7 dB (100 Hz), +4 dB (10 kHz) High.. +10 dB (100 Hz), +6.5 dB (10 kHz) (volume: 30 dB)

! CD DVD ! CDCD CD ! !
! 12-cm8-cmCD 8 cm CD ! CDCD ! ! CD-R/CD-RW ! ! ! !
..14.4 V DC 12.0 V 14.4 V DC .. ..10.0 A DIN ..17850162 ..1885814 D ..17850162 ..1704714 ..1.3kg
..87.5108.0 MHz ..8 dBf0.7 V/75 W. S/N 30 dB ..75 dBIEC-A. ..0.3 %65 dBf1 kHz 0.1 %65 dBf1 kHz ..Hz3 dB . dB65 dBf1 kHz.45
..22W45015 000Hz5% THD4 W . W 4.50 . W4W8 W.4 ..2.2 V/1 kW. ..100Hz ..13 dB . kHz.1 ..12 dB ..10kHz ..12 dB ..+7dB100Hz+4dB 10kHz ..+10dB100Hz+6.5dB 10kHz -30dB
..kHz9 kHz kHz10 kHz ..18 VS/N 20 dB. ..65 dBIEC-A.
..CD ..CD ..44.1 kHz .16. ..Hz1 dB ..94 dB1 kHzIEC-A. . dB1 kHz.92 ..2.
.. .. ) / : ( .. ) (IEC-A .. ) ( ) ( . ) ( .. ) (
.. ) : ( .. . ) (: DIN .. . D .. . ..
.. ) ( ) ( .. ) : ( .. ) (IEC-A
.. ) ( .. .. ) ( / ... / //: .. .. .. .. .. .. + ) ( + ) ( . + ) ( + ) ( ): (
.. . : .. .. .. ) ( .. ) ( ) (IEC-A .. ) ( .. )(
CD-R/CD-RW . . . . . CD . . . . . . . . ! ! ! ! ! ! ! ! ! ! !

.

. . ON OFF .CD .
,21 ,11- ERROR 03 ,71 ,21 ,11- ERROR 03 ,71 ,11 ,01- ERROR ,03 ,71 ,51 ,21 0A

51-ERROR

32 ,22-ERROR CD-ROM

- CD. ROM
CD DVD . CD CD CD . . . . . . ! ! !

! . . !

! CD . CD . ! CD .CD ! .
c d .AM c 9 ) (. d 01 ) (.
. . FUNCTION.AUX a b .

c d . c d :

# .BAND # AUDIO .
) SLA ( . ! FM . ! AM . FM . AUDIO.SLA

a b.

. ! . % CLOCK . CLOCK .

a b . 4+ SLA 4 SLA .

# .BAND

# .

. SOURCE .
FM . ! . . FUNCTION.FM
SOURCE . FUNCTION . FUNCTION : ) FM ) AM(FM ) AUX(AM ( .
# .BAND # SOURCE .
c d .FM c 05 ) (. d 001 ) (.
AM . ) ( ) (. FUNCTION.AM

. FUNCTION.

DYNAMIC FLAT CUSTOM NATURAL VOCAL POWERFUL . ! CUSTOM . ! FLAT . % EQ. EQ : CUSTOMNATURALVOCALDYNAMIC POWERFULFLAT

.CD FUNCTION.SCAN

a . SCAN . . b .
# SCAN .FUNCTION # CD .

. .CUSTOM

//. AUDIO.TREBLE/MID/BASS
. FUNCTION.PAUSE a b .

a b. 6+ 6 .

# .PAUSE # .BAND

. AUDIO.LOUD a b .

/ . AUDIO.FAD

# .LOUD

c d . ) LOW() HI(
a b /. 51 FAD F 51.FAD R

# 0 FAD .

c d /. 51 BAL L 51.BAL R

CD .CD .

# . # CD SOURCE CD. # CD .EJECT

% . .

Published by Pioneer Corporation. Copyright 2006 by Pioneer Corporation. All rights reserved.

Printed in Thailand

<KSNZX> <06H00000>

<CRD4146-A/N> ES

doc1

Installation
Check all connections and systems before final installation. Do not use unauthorized parts. The use of unauthorized parts may cause malfunctions. Consult with your dealer if installation requires drilling of holes or other modifications of the vehicle. Do not install this unit where: it may interfere with operation of the vehicle. it may cause injury to a passenger as a result of a sudden stop. The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet. Optimum performance is obtained when the unit is installed at an angle of less than 60.

ENGLISH

DIN Front-mount
Installation with the rubber bush

Dashboard

DIN Rear-mount
Mounting sleeve 1. Extend top and bottom of the trim ring outwards to remove the trim ring. (When reattaching the trim ring, point the side with a groove downwards and attach it.) It becomes easy to remove the trim ring if the front panel is released. Trim ring

MANUEL DINSTALLATION

INSTALLATION MANUAL

Rubber bush

DEH-2950MP DEH-1950 DEH-1950G
This product conforms to new cord colors. Los colores de los cables de este producto se conforman con un nuevo cdigo de colores. As cores dos fios deste produto seguem um novo padro de cores.
1. Insert the mounting sleeve into the dashboard. When installing in a shallow space, use a supplied mounting sleeve. If there is enough space behind the unit, use factory supplied mounting sleeve. 2. Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90) into place. 3. Install the unit as illustrated.
2. Determine the appropriate position where the holes on the bracket and the side of the unit match.
When installing, to ensure proper heat dispersal when using this unit, make sure you leave ample space behind the rear panel and wrap any loose cables so they are not blocking the vents.

Removing the Unit

1. Extend top and bottom of the trim ring outwards to remove the trim ring. (When reattaching the trim ring, point the side with a groove downwards and attach it.) It becomes easy to remove the trim ring if the front panel is released. Trim ring 3. Tighten two screws on each side. Use either truss screws (5 mm 8 mm) or flush surface screws (5 mm 9 mm), depending on the shape of screw holes in the bracket. Screw

DIN Front/Rear-mount

This unit can be properly installed either from Front (conventional DIN Front-mount) or Rear (DIN Rear-mount installation, utilizing threaded screw holes at the sides of unit chassis). For details, refer to the following installation methods.
2. Insert the supplied extraction keys into both sides of the unit until they click into place. 3. Pull the unit out of the dashboard. Dashboard or Console Factory radio mounting bracket

bb' u l UN' c r M

Printed in Thailand

<CRD4139-A/N> ES

<KSNNX> <06H00000>

Instalacin

Verifique todas las conexiones y sistemas antes de la instalacin final. No utilice piezas no autorizadas. El uso de piezas no autorizadas puede causar un fallo de funcionamiento. Consulte su revendedor si se requiere taladrar agujeros o hacer otras modificaciones del vehculo para la instalacin. No instale esta unidad donde: pueda interferir con la operacin del vehculo. pueda causar lesiones a un pasajero en el caso de una parada brusca. El lser semiconductor se daar si se sobrecalienta. Instale esta unidad alejada de lugares calientes como cerca de la salida del calentador. Se obtiene el rendimiento ptimo cuando se instala la unidad en un ngulo inferior a 60. 1. Inserte el manguito de montaje en el tablero de instrumentos. Cuando instale en un lugar poco profundo, utilice el manguito de montaje suministrado. Si hay espacio suficiente detrs de la unidad, utilice el manguito de montaje suministrado de fbrica. 2. Fije el manguito de montaje utilizando un destornillador para doblar las lengetas de metal (90) en posicin. 3. Instale la unidad como se muestra.

wU w WI d* eM `OUH US r UNF{u w `OUH* oDM v bu UNd bF Wu s bu V r

DIN fOUI V wHK wU VOd

U_ s U bu c VOd sJ1 fOUI V bOKI wU_ VOd V wHK VOd nK) s DIN WMM * wd uI ULFU DIN fOUI s be* bu bU qJO VU vK WOU VOd d l qO UH
bF Wu u uJ ud VOd UM lMB* s u*

Connecting the Units

5. Connect with RCA cables (sold separately) When this unit is installed in a vehicle without ACC (accessory) position on the ignition switch, red cable must be wired to the terminal that can detect the operation of the ignition key. Otherwise, battery drain may result.
Control signal is output through blue/white cable when this unit is powered on. Connect it to an external power amps system remote control or the vehicles auto-antenna relay control terminal (max. 300 mA, 12 V DC). If the vehicle is equipped with a glass antenna, connect it to the antenna booster power supply terminal. Never connect blue/white cable to external power amps power terminal. Also, never connect it to the power terminal of the auto antenna. Otherwise, battery drain or malfunction may result. Black cable is ground. This cable and other products ground cable (especially, high-current products such as power amp) must be wired separately. Otherwise, fire or malfunction may result if they are accidentally detached. Cord function may differ according to the product, even if cord color is the same. When connecting this system, be sure to check all manuals and connect cords correctly.
Connection Diagram (Fig. 1)
1. 2. 3. 4. 5. 6. This Product Rear output Antenna jack Fuse (10 A) Connect with RCA cables (sold separately) Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). 7. Power amp (sold separately) 8. System remote control 9. Yellow Connect to the constant 12 V supply terminal. 10. Red Connect to terminal controlled by ignition switch (12 V DC). 11. Black (chassis ground) Connect to a clean, paint-free metal location. 12. Rear speaker 13. Perform these connections when using the optional amplifier. 14. Front speaker 15. Left 16. Right 17. White 18. White/black 19. Gray 20. Gray/black 21. Green 22. Green/black 23. Violet 24. Violet/black 25. With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers.

1. This Product

7. Power amp (sold separately)
4. Fuse (10 A) 3. Antenna jack 6. Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC).
ACC position 8. System remote control

 

Tags

Samples Calculator Flushmate 503 Powercinema 5 WEP250 ZAN1650 FL1022CH ZWS185W HL-1670N LE32R88BD GZ-MG505E EW1289W NX10P RL33ebsw UP-A1 SA8001 Server MV09AH M1020 PEG-SL10 Linux Alesis D4 ZWF365 Classic WB510 WT-R1071TP PV-GS120 E1310 3 0 Aspire-E500 Studio DTB-9401 Portable D1875 Manual PSP-1007 K Braun 6013 YP-U4QR 6M810C Motherboard Motorola K1M Samsung C270 Manual Ezai2997 ES-7058 C20UX DX7590 Jamman Solo A-2300S Canon ES55 WV-D10000 Galaxy 500 T 922 100 IS Cm1017 MFP ER3261BNS WV-NW964 1050 SW STR-DE245 DS-2102 CL7300 AF-S125PX 52HM95 RM-VL610N PV-DC152D VCT-1500L Travelmate 280 UN32C5000QF Aspire 1642 Tomo X SCX-4521 Samsung SL30 AVD-W6200 Aztek 2001 MT-100 Foretrex 201 R-956 SCH-B850 OP10-230 VE1020 ICF2001 760BF Monitor MD-ZV30 MP780 Trike LAC-M6500R V3690 HS06THB D DCR-HC20 MAX-DA75 KD-LHX601 Alliance P-600 RC-1000 C54APT GA-8I945GMF PA2200 SRU7060 BH-304 RSH1dbrs

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101